Electronic Components Explained Pdf Jobs in Usa

• 
  
• Requires a High School Diploma or GED
  
• Soldering experience
  
• Inspection experience
  

• 
  
• Europlacer experience
  
• SMT Experience
  
• SMT Setup experience
  
• Conformal coat experience
  
• Assembly experience
  

A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.

Description

The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.

Job Duties:

Specific duties will include:

SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.

Requirements Analysis/Review for test-ability

Test procedure development, implementation, execution and failure root cause analysis.

Test planning and preparation.

Assess System performance against requirements

Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.

Develop and refine system and board level test cases and procedures.

Trouble shoot subsystem and system level failures to root cause.

Design test fixtures & cables to enable testing.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).

Trouble shoot subsystem and system level failures to root cause.

Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.

Interpret test requirements and electrical test results.

Read electrical schematics.

Test planning, preparation & execution

Required Qualifications:

3 to 5 years of experience

Strong interpersonal skills

Strong analytical skills

B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired

Will consider equivalent years of relevant experience in lieu of a formal degree

Experience working with or developing Automated Test Equipment (ATE).

Experience in hardware and test equipment troubleshooting experience.

Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand

Can operate independently

Desired Skills:

Excellent verbal and written communication skills.

Experience working independently and in a collaborative environment

Ability to react to project adjustments and alterations promptly and efficiently

Ability to effectively prioritize and execute tasks in a high-pressure environment

Familiarity with electronic components and common electronic test equipment.

Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads

Ability to interpret test requirements and electrical test results.

Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.

Experience with GIT, Tortoise SVN, or equivalent software configuration management tools

Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.

Previous experience with programming languages such as C, C++ & C#.

Previous experience with Visual Studio.

Compensation:

This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.

Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

Job Summary

The Maintenance Technician I–III is responsible for performing preventive and predictive maintenance and repairing production equipment as needed. This role also supports senior technicians with electrical and mechanical projects while ensuring safe and efficient equipment operation in a manufacturing environment.

Key Responsibilities

• Perform preventive and predictive maintenance on production equipment.
• Assist senior technicians with equipment repairs while learning best practices.
• Support small electrical and mechanical projects under the direction of the Team Lead or Supervisor.
• Follow all safety policies, procedures, and regulatory requirements.
• Ensure compliance with occupational health and safety standards and recommend improvements when needed.
• Work collaboratively with production teams to support operational efficiency.
• Repair and replace electrical, hydraulic, pneumatic, and electronic components including motors, contactors, relays, timers, switches, PLCs, light curtains, motor controls, and valves.
• Diagnose and troubleshoot faults in electrical equipment and integrated systems.
• Install and repair electrical wiring, conduits, receptacles, switch boxes, cable assemblies, and lighting fixtures.
• Maintain equipment performance and assist with managing spare parts inventory.
• Support equipment installation, setup, modification, and relocation.
• Read and interpret electrical schematics, wiring diagrams, and hydraulic/pneumatic diagrams.
• Test electrical and electronic components for voltage, current, resistance, and continuity.
• Respond to equipment breakdowns and resolve issues to prevent production downtime.
• Follow Lockout/Tagout (LOTO) procedures when servicing equipment.
• Accurately complete work orders and maintenance documentation.

Qualifications

Skills

• Experience troubleshooting electrical and mechanical equipment.
• Knowledge of PLC systems, robotics, AC/DC and servo drives, motion control, HMI interfaces, and motor controls.
• Ability to read electrical, mechanical, pneumatic, and hydraulic schematics.
• Understanding of PLC programming concepts (e.g., Siemens Step 7, Beckhoff TwinCat).
• Knowledge of electrical circuitry including relays, contactors, limit switches, and proximity sensors.
• Familiarity with Computerized Maintenance Management Systems (CMMS) is a plus.

Traits

• Strong teamwork and collaboration skills.
• Mechanical aptitude and interest in technical problem-solving.
• Excellent communication and interpersonal skills.
• Detail-oriented with strong follow-through.
• Willingness to work rotating shifts.
• Ability to support and manage small technical projects.

Education & Experience

• Minimum 2 years of relevant experience with strong troubleshooting skills.

Preferred:

• Experience in a fast-paced manufacturing or industrial environment.
• Technical trade school certificate or related military training.

Vishay manufactures one of the world's largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. We help the world's most in-demand technologies come to life. Every day our products touch your life and the lives of people across the world, though you likely do not know it. Come join us and help us build The DNA of tech.™

We are seeking great talent to help us build The DNA of tech.®

Vishay manufactures one of the world's largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. We help the world's most in-demand technologies come to life. Every day our products touch your life and the lives of people across the world, though you likely do not know it. Come join us and help us build The DNA of tech.™

Vishay Intertechnology, Inc. is a Fortune 1,000 Company listed on the NYSE (VSH). Learn more at you want to help us build the DNA of tech.? Vishay Thin Film is currently seeking applicants for a 3rd Shift Production Supervisor.

Job Location:

Vishay Thin Film is located in Niagara Falls, NY. The site has a lot of natural beauty to offer including the world-famous Niagara Falls which are just a short drive away!

What you will be doing:

• Direct supervision of Production Process and Personnel
• Administrative responsibilities for Production personnel, including timekeeping, progress review, and corrective counseling
• Monitor, evaluate and interpret data to ensure process integrity and specification compliance
• Monitor and control operation of Production Equipment
• Compile and enter production data records
• Train and develop production staff regarding policies, procedures, and related responsibilities
• Provide accurate and specific data and input to production support departments and personnel
• Meet with scheduling, engineering, and other support departments as needed

What you will bring along:

• B.S. degree or HS diploma with applicable job-related training and experience preferred
• Minimum 3-years of supervisory experience in manufacturing or related production area
• Strong technical background in related production equipment operations
• Safety and Hazardous Materials Awareness training preferred

Pay Range:

$75-80k annually

What can we offer you for your talent:

Vishay offers a comprehensive suite of benefit programs including health care coverage, financial support programs and other resources designed to help you achieve your personal and professional goals. With us, you'll experience unique career paths, an open and collaborative culture, a stable business that will be there for you, and opportunities to work globally and locally.

Do you have the skills we need? Are you ready to power your career as you power the world? If so, apply today.

This position requires access to information subject to the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, this position is open only to applicants who qualify as “U.S. Persons” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee.”

It is the policy of Vishay to provide equal employment and advancement opportunities to all colleagues and applicants for employment without regard to sex, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

As an equal opportunity employer, Vishay is committed to a diverse workforce. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact assistance

This position requires access to information subject to the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, this position is open only to applicants who qualify as “U.S. Persons” according to U.S. federal law.

Vishay offers a comprehensive suite of benefit programs including health care coverage, financial support programs and other resources designed to help you achieve your personal and professional goals. With us, you'll experience unique career paths, an open and collaborative culture, a stable business that will be there for you, and opportunities to work globally and locally. Do you have the skills we need? Are you ready to power your career as you power the world? If so, apply today.

Vishay is an AAP and Equal Opportunity Employer

About us

Sol-Ark is a Veteran-owned solar and battery-based technology manufacturer based in Texas. Our mission is making the most reliable, innovative, and affordable solar storage solutions to power families & their businesses. Founded in 2013, the company has experienced massive, organic growth due to our equipment being 3x more powerful and capable than best-in-class alternatives. It is a fast-paced, yet casual work environment. We are a close-knit team looking to make significant contributions to a very fast-growing industry that values merit, character, aptitude, sustainability and self-reliance.

Job Description

Location: This position will be based in our corporate headquarters in Allen, Texas (Dallas-Fort Worth area)

Please use this link to apply directly to Careers Page: are seeking a detail-oriented and proactive Shift Manufacturing Supervisor – Afternoon Shift to join our team, to oversee our mechanical electronic assembly operations. The ideal candidate will be responsible for managing daily production activities, ensuring adherence to quality standards, and leading a team of assembly technicians to meet production goals efficiently.

Responsibilities:

• Supervision and Leadership: Manage and mentor a team of assembly associates, technicians, or any other assigned personnel, providing guidance, training, and performance evaluations to ensure a skilled and motivated workforce.
• Production Management: Oversee the assembly of mechanical and electronic components, ensuring production schedules are met and products comply with quality specifications.
• Workflow Optimization: Develop and implement efficient workflow processes, monitor production metrics, and identify areas for improvement to enhance productivity and reduce costs.
• Quality Assurance: Establish and enforce quality control standards according to the quality management system (QMS), conduct regular inspections, and collaborate with the quality assurance team to address any issues promptly.
• Safety Compliance: Ensure all assembly operations adhere to company safety policies and regulatory requirements, promoting a culture of safety awareness among staff.
• Resource Coordination: Manage inventory levels of assembly materials, coordinate with the procurement team for timely replenishment, and ensure optimal utilization of resources.
• Reporting: Prepare and present regular reports on production performance, quality metrics, and other relevant data to senior management.

Requirements

• Education: High school diploma or equivalent required; a Bachelor’s degree in Industrial Engineering, Manufacturing Technology, or a related field is preferred.
• Experience: Minimum of 3 years of supervisory experience in a manufacturing environment, specifically in mechanical and electronic assembly.
• Technical Proficiency: Strong understanding of assembly equipment, tools, and processes, with the ability to read and interpret technical drawings and schematics.
• Leadership Skills: Proven ability to lead and develop a team, with excellent communication and interpersonal skills.
• Problem-Solving: Demonstrated aptitude for identifying operational issues and implementing effective solutions promptly.
• Organizational Abilities: Strong organizational and time-management skills, with the capacity to manage multiple priorities in a fast-paced environment.
• Software Knowledge: Proficiency in Microsoft Office Suite; experience with manufacturing software systems (e.g., SAP, NetSuite, Oracle) is a plus.

Salary and Benefits: We offer a competitive salary and performance-based bonus program, top-tier benefits package, including medical, dental, and vision insurance, 401(k), and paid time off.

Classification: Exempt

Location: Maintenance – 8800 Corridor Road, Annapolis Junction, MD

Reports To: Maintenance Manager or their designee

Salary: $79,500 - $83,000 (DOQ)

Schedule: Tuesday – Saturday 3:30 PM – 12:00 AM (15:30 hours – 00:00 hours) ***subject to change based on the operational needs of the company***

ABOUT US

Transit Management of Central Maryland (TMCM) d.b.a. the Regional Transportation Agency (RTA) of Central Maryland manages and operates public transportation in Anne Arundel County, Howard County, Northern Prince George’s County, and the City of Laurel. RTA employs 150 administrative and operational staff out of our Annapolis Junction location.

JOB DESCRIPTION

The RTA is actively seeking an experienced Diesel Bus Mechanic Shift Supervisor. This individual will manage the work of mechanics and supervise the maintenance for our fleet of 80 transit buses and service vehicles.

This position requires the level of knowledge and skills necessary to troubleshoot and repair automotive, transit, and commercial vehicles and equipment. Must have knowledge of and ability to use hand tools, diagnostic equipment, laptops, scan tools, gauges, micrometers etc. Shift Supervisors are required to create, monitor, update and close repair orders in the company’s management system and ensure that employees are using the system effectively. Knowledge and skills using Microsoft computer programs such as Word, Excel, and Power Point are necessary. This individual must have the ability to effectively lead, work and communicate with employees and customers, and ensure repairs and maintenance are performed in a timely and efficient manner. Requirements also include daily safety inspections, with minimal reworks, and maintaining production standards. Particular attention will be paid to timeliness and quality of repairs. Shift supervisors will also be responsible for managing and leading service lane employees.

KEY RESPONSIBILITIES, INCLUDING, BUT NOT LIMITED TO:

• 
  
• Demonstrates behaviors that are consistent with standards for professional and ethical conduct
  
• Must know how to diagnose and accurately perform all phases of vehicle repairs, in order to manage the work of those who perform these tasks:
  
  • 
    
  • Remove, clean, repair, reinstall and adjust vehicle components:
    
    • 
      
    • Engine repair and diagnosis
      
    • Engine emission components (State certification)
      
    • Driveline components
      
    • Electrical/ electronic components
      
    • Brakes/suspension/steering/exhaust
      
    • Cab/chassis
      
    • Hydraulic diagnosis and repair
      
    • Heating, Ventilation & Air Conditioning
      
    • Proficiency in various scan tools and laptops
      
    
    
  
  
• Ensure work orders are generated and properly completed for all work performed
  
• Select appropriate, effective course of action for repairs
  
• Evaluate completed work prior to release and road test vehicles as necessary
  
• Ensure safe use of power and hand-held tools, ensure shop safety protocols are followed, shop is clean and organized, tools/equipment are properly stowed after shift and environmental regulations are adhered to
  
• Assign, monitor and approve all work performed by the designated team
  
• Perform road calls and emergency services as necessary
  
• Move vehicles safely between lot, shop and work areas
  
• Communicate professionally with customers, team members and supervisors
  
• Actively participate and/or administer in safety or educational training as required
  
• Will be responsible for prioritizing workload and distribution of work as well as advising the proper repair procedures through clear and concise communication.
  

Minimum Qualifications:

• 
  
• Candidates must have a high school diploma, or equivalent.
  
• A/C 609 certification required.
  
• Must have a valid Commercial Driver’s License Class B or higher with Passenger (P) endorsement and no Airbrakes (L) restriction.
  
• Must have an appropriate mechanic’s tool set.
  
• Minimum of three (3) years direct automotive, heavy equipment or transit repair experience.
  
• Must have demonstrated experience monitoring and meeting PM schedules and operating automotive repair shop equipment.
  
• Must have excellent communication skills, bringing demonstrated abilities of building solid relationships with superiors, peers and subordinates.
  

Special Requirements:

• 
  
• This position requires a minimum of three (3) ASE Heavy Duty/Transit related certifications. These certifications must be obtained within the first six (6) months of employment. 60; New Shift Supervisors are strongly encouraged to obtain their Heavy Duty/Transit ASE Master certification within their first two (2) years of employment through progressive testing.
  
• Forklift certification must be achieved within one (1) year of employment.
  

Physical Requirements & Working Conditions:

• 
  
• Incumbent must be able to move about the office and between floors; utilize standard office equipment; access filing system/cabinets; and communicate effectively and efficiently in person or by telephone.
  
• Intermittent sitting, standing, stooping, crouching, walking, lifting light and heavy objects, climbing ladders/stairs/ramps or scaffolding, and using tools and equipment that require a high degree of manual dexterity.
  
• Required to sit, stand, walk, use hands and fingers, handle, feel, speak, hear, to reach with hands or arms, climb or balance, stoop, kneel, crouch or crawl, and smell. Must be able to lay on back on a mechanic’s creeper to work underneath motor vehicle equipment.
  
• Must regularly lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds with assistance.
  
• Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
  
• Employee must be free of any conditions, which result in temporary loss of consciousness or ability to reason.
  
• Work is performed with exposure to noise, chemicals, noxious odors, gases, poor ventilation, inclement weather, dirt, grease, dust, and machinery with moving parts requiring use of protective devices.
  
• Must be able to acquire and maintain a Medical Examiner's Certificate (DOT card).
  
• Must be able pass pre-employment drug screening.
  
• This position is safety-sensitive and is subject to RTA's Drug and Alcohol Testing Program.
  
• Candidate is considered \"Essential Personnel.\"
  

Right to Revise:

This job description is not meant to be all-inclusive, and the company reserves the right to revise this job description as necessary without advance notice.

The duties and expectations herein are intended to describe the general nature and level of work being performed by employees. They are not to be construed, as an exhaustive list of responsibilities, duties, and skills required. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer without notice.

We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment.

Salary/Compensation: $79,500 - $83,000 per year

Overview

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.

2. We strive for excellence.

3. We thrive on diversity.

4. We celebrate collaboration.

5. We champion innovation.

6. We safeguard freedom of inquiry and expression.

7. We nurture the wellbeing of our community.

8. We act ethically.

9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

The Campus Engineering team exists to provide support to all aspects of design, construction, operation, and maintenance of campus facilities. Campus facilities include not only the buildings which are occupied by our students, faculty and staff, but it also includes central campus utility plants and the associated utility systems, including chilled water, steam, power, and natural gas

During the design process, first, our Team creates and maintains the design standards for building systems, including HVAC, plumbing, power distribution, and lighting. These standards are used by us, and by our outside consultants, to guide the design efforts of new buildings and renovation projects. Our team is also responsible for reviewing the design documents created by the consultants to ensure that their designs comply with standards.

During construction projects, our Team is often called upon to provide advice related to unforeseen conditions which are discovered during demolition work. We often provide a second review of material and equipment submittals, as well as shop drawings. On most campus construction projects, the day-to-day interaction with the contractor is managed by our co-workers within one of the Construction teams. However, on a few projects we may be called on to manage those day-to-day contractor activities.

Post construction, and throughout the life of the facilities, our team serves to provide advice to our Operation & Maintenance teams, and our Utilities Maintenance team, when a problem grows larger than their capacity. We also plan and prepare the way for projects to replace equipment as it nears the end of life. We are always looking ahead for opportunities to increase efficiency and resiliency in the systems.

If you have experience in this type of work, please consider applying to join our Team.

Provide basic electrical engineering services in support of either the operation and maintenance of the campus electrical distribution system or the design, construction and operation of electrical equipment, components or systems associated with research efforts within an academic or research unit. This position will interact on a consistent basis with: facilities management and utilities personnel or research management and faculty; co-workers, vendors, suppliers and contractors. This position typically will advise and counsel: management personnel. This position will supervise: NA.

Job Duty 1 -
Perform basic design and installation of electrical electrical/electronic components

Job Duty 2 -
Review and provide input to engineering plans and specifications for electrical systems

Job Duty 3 -
Perform basic troubleshooting associated with electrical systems; may involve calibration and repair work.

Job Duty 4 -
Prepare drawings, schematic diagrams and related documentation associated with electrical components and systems

Job Duty 5 -
Monitor expenses incurred; prepare related reports

Job Duty 6 -
Interact with vendors regarding procurement and delivery issues

Job Duty 7 -
Perform other duties as assigned

Educational Requirements
Bachelor's Degree in Electrical Engineering or equivalent combination of education and experience

Other Required Qualifications
Computer knowledge: ability to search for data, input/edit information, word processing, design custom reports; software knowledge includes Windows, Excel, MS Word and PowerPoint. Position has responsibility for formally representing the voice of the constituent/customer to Georgia Tech and is vital to effective marketing and communications by the Institute.

Required Experience
0-2 years of job related experience

Additional Preferred Qualifications
Engineer in Training (EIT) or Professional Engineer (PE)

Preferred Educational Qualifications
Additional Bachelor's Degree in other Engineering discipline or Master's Degree in applicable field, or State Trade License in any applicable field

SKILLS
This job requires entry professional level knowledge and skills in the application of electrical engineering principles, processes and practices. Skills in application of regulations, codes and safety practices associated with electrical systems is required as is the use of office and engineering/technical related computer applications, databases and systems.

The University System of Georgia is comprised of our 25 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

Job Code: S5

Pay Range Starting At: $49,894.00 - $67,855.00

Location: Atlanta, GA

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening

Rite-Hite is the global leader in the manufacture and distribution of industrial loading dock and door equipment. Our innovative products and world class sales organization ensure solid, consistent growth, both for our company and our staff. We are always looking ahead to develop innovative new products and services to improve our customers' safety, security, and productivity.

Rite-Hite provides competitive compensation and a comprehensive benefits package with medical, dental, and vision coverage along with life and paid medical leave. We also provide a retirement savings plan that combines 401(K) with company match and profit sharing. Paid holidays, vacation, and up to five paid personal/sick days per year round out the package.

Rite-Hite is an Equal Opportunity/Affirmative Action employer offering a drug free workplace for our customers and employees.

We are seeking a motivated and detail-oriented Electrical Engineering Intern to join our team at our manufacturing facility in Dubuque, IA. In this role, you will support electrical engineering staff in the design, testing, analysis, and improvement of electrical systems, components, and products. This internship provides hands-on experience with real-world electrical engineering applications and the opportunity to apply academic knowledge in a professional environment.

Essential Duties and Responsibilities

• Assist electrical engineers with the design, development, and testing of circuits, control systems, and electronic components.
• Perform data collection, signal analysis, and documentation to support ongoing electrical engineering projects.
• Create, update, and review electrical schematics, wiring diagrams, PCB layouts, and technical reports.
• Conduct research on electrical components, emerging technologies, and engineering methods as assigned.
• Support troubleshooting, root-cause analysis, and quality checks on electrical systems or prototypes.
• Participate in design reviews, project meetings, and technical presentations.
• Follow company safety procedures, electrical standards (e.g., NEC, IEC), and engineering best practices.

Education and/or Experience

• Currently pursuing a bachelor's degree in Electrical Engineering or a closely related field.
• Strong analytical, mathematical, and problem-solving skills.
• Familiarity with electrical engineering tools, laboratory equipment, and simulation software.
• Effective communication and teamwork abilities.
• Willingness to learn and adapt in a fast-paced engineering environment.

Preferred Qualifications

• Experience with tools such as MATLAB, LTspice, PSpice, Simulink, LabVIEW, Python, or CAD for electrical design (e.g., Altium, KiCad, AutoCAD Electrical).
• Hands-on project, lab, or internship experience in circuits, electronics, power systems, or embedded systems.
• Knowledge of electrical safety standards, PCB design principles, or relevant technical concepts (e.g., signal processing, control systems, microcontrollers)

Additional Job Information:

• 
  
• 
  Career Development: We invest in your growth - our Operator Advancement Program supports your goals. We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program. TTM promoted 68% of applicants in the program's first year!
  
• 
  Competitive Compensation: We offer a competitive package that reflects your skills and experience along with annual compensation reviews to ensure your growth is aligned with your performance and market trends.
  
• 
  Comprehensive Benefits and PTO: Including health, dental, and vision insurance to keep you at your best. Enjoy 10 paid holidays and 3 weeks of paid time off annually to recharge.
  

• 
  
• Perform maintenance tasks to maintain equipment in good condition.
  
• Operates test equipment to perform pass/fail product tests.
  
• Daily communication with all team members and supervisor through the use of shift meetings, email, log book, and other written and verbal methods.
  
• Maintain clean, safe and orderly work environment.
  
• Ability to interpret and follow verbal and written work orders.
  
• Use various measuring tools as required.
  
• Offer suggestions to improve/enhance processes.
  
• Report any problems, defective materials, questionable conditions or unsafe conditions to supervisor or leader
  
• Provide high quality and timely service to all internal customers.
  
• Take personal ownership of internal and external customer issues.
  

• 
  
• Ability to follow detailed written and verbal instructions
  
• Ability to perform basic and routine repetitive mechanical assembly operations on components and subassemblies using fixtures, screwdrivers, etc.
  
• Proficient use and familiarity with hand tools.
  
• Will require basic mechanical skills.
  
• Ability to read, and follow assembly instructions, including visual aids and drawings.
  
• Ability to work both independently and as part of a team.
  
• May require limited soldering skills.
  

Position Summary

DirectPath Recruiting Services is partnering with a leading electronics manufacturer to hire a skilled SMT Operator. This role supports high-volume PCB assembly through repetitive bench and automated line operations. The SMT Operator will operate manufacturing equipment, inspect and solder PCB assemblies to IPC-610 Class 2 standards, and help drive productivity and process improvements. This is an excellent opportunity for candidates with electronics manufacturing experience seeking growth in a fast-paced production environment.

Pay: $17–$18/hour + overtime opportunities. Plus 5% shift premium

Bonus: Perfect Attendance Bonus up to $2.00/hour additional

Shift: 2nd Shift — 3:00 PM to 12:30 AM

Key Responsibilities

• Follow written and verbal work instructions and standardized manufacturing processes
• Operate SMT manufacturing equipment according to established procedures
• Maintain required takt time across multiple task operations
• Inspect PCB assemblies per IPC-610 standards (SMT and through-hole solder joints)
• Perform hand soldering of through-hole and SMT components to IPC-610 Class 2
• Protect electronic components and assemblies using proper ESD procedures
• Perform basic SMT equipment maintenance and component identification
• Monitor productivity metrics (cycle time, drop rate, output) and identify bottlenecks
• Participate in continuous improvement and process optimization efforts
• Maintain a clean and organized work environment following 5S principles
• Comply with all OSHA, EPA, and safety requirements
• Communicate quality, safety, and process concerns to leadership

Required Qualifications

• 1–2 years of electronics manufacturing or SMT production experience
• High school diploma or GED
• Working knowledge of SMT machine operation and basic quality requirements
• Ability to read and follow detailed work instructions in English
• Basic math skills (add, subtract, multiply, divide)
• Strong attention to detail and manual dexterity
• Ability to work effectively in a team-based manufacturing environment

Preferred Skills

• IPC-610 certification or hands-on PCB inspection experience
• Experience with SMT equipment setup or basic maintenance
• Familiarity with lean manufacturing, 5S, or continuous improvement

• 
  
• Assist with the battery replacements and new installations.
  
• Assist, as necessary, with preventative maintenance of batteries with minimal disruption to customer.
  
• Assist in the warehouse when needed.
  
• Interact effectively with internal and external customers.
  
• Follow operational, maintenance and emergency methods of procedure (MOPs)
  
• Ensure strict adherence to critical facility work rule and safety procedures.
  
• Ability to use hand and general maintenance tools and equipment.
  
• Keep job site clean during replacement, installs, and maintenance.
  
• Assist with work in other service divisions (Switch Gear, Operations, HVAC, etc.) as needed.
  
• Work from schematic diagrams, sketches, and verbal instructions.
  
• Learn how todisconnect and connectsealedbatteries in cabinets and open racks.
  
• Learn how to build flooded cell batteryracks, and spill containment systems.
  
• Learn how to install flooded cell batteries onto rack systems in thecustomerscritical space.
  
• Learn how to enter pre-installation test readings into our reporting format thru laptop computer.
  
• Learn how to collect data from PM services and importinto files for reporting purposes.
  
• Gain experience from preventive maintenance, trouble diagnosis, routine and emergency maintenance and repairs with minimum direct supervision to DC batterysystems
  
• Regular and reliable attendance is an essential job function.
  
• Other duties as assigned by Services Management.
  
• Travel approximately 75% or more
  
• Must be US citizen
  

• 
  
• High School Diploma
  
• Clean driving records a must
  
• Safe operation of department equipment
  
• Elementary fix/repair techniques based on directed supervision
  
• Knowledge of or ability to learn basic AC/DC theory, electronic components, and electronic circuitry
  
• Complete training on:
  
• Use of Digital multimeter for AC and DC diagnostic measurements
  
• Use of Amp Clamp and flexible CT in DC and AC measures
  
• Use of AlberCellcorderfor use as a battery testing and maintenance tool for a multitude of various battery designs and chemistries
  
• Show understanding of proper use of:
  
• Isolation devices to control available voltage potentials.
  
• Necessary use of Arc-Flash suit and PPE.
  
• Show competency in the connections of series, parallel, and series-parallel battery strings.
  
• Understand torque values, torque-mark application, and visual inspection of completed battery cabinet installations.
  

• 
  
• Proficient knowledge of Microsoft Office including: Word, Excel.
  

• 
  
• OSHA 10-hour certification
  
• NFPA-70E Safety Training
  
• Supervisory Responsibilities:
  

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  
• CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
  

• 
  
• Assist with the battery replacements and new installations.
  
• Assist, as necessary, with preventative maintenance of batteries with minimal disruption to customer.
  
• Assist in the warehouse when needed.
  
• Interact effectively with internal and external customers.
  
• Follow operational, maintenance and emergency methods of procedure (MOPs)
  
• Ensure strict adherence to critical facility work rule and safety procedures.
  
• Ability to use hand and general maintenance tools and equipment.
  
• Keep job site clean during replacement, installs, and maintenance.
  
• Assist with work in other service divisions (Switch Gear, Operations, HVAC, etc.) as needed.
  
• Work from schematic diagrams, sketches, and verbal instructions.
  
• Learn how todisconnect and connectsealedbatteries in cabinets and open racks.
  
• Learn how to build flooded cell batteryracks, and spill containment systems.
  
• Learn how to install flooded cell batteries onto rack systems in thecustomerscritical space.
  
• Learn how to enter pre-installation test readings into our reporting format thru laptop computer.
  
• Learn how to collect data from PM services and importinto files for reporting purposes.
  
• Gain experience from preventive maintenance, trouble diagnosis, routine and emergency maintenance and repairs with minimum direct supervision to DC batterysystems
  
• Regular and reliable attendance is an essential job function.
  
• Other duties as assigned by Services Management.
  
• Travel approximately 50% or more
  

• 
  
• Must be a US citizen
  
• Able to obtain security clearance is preferred
  

• 
  
• High School Diploma
  
• Clean driving records a must
  
• Safe operation of department equipment
  
• Elementary fix/repair techniques based on directed supervision
  
• Knowledge of or ability to learn basic AC/DC theory, electronic components, and electronic circuitry
  
• Complete training on:
  
• Use of Digital multimeter for AC and DC diagnostic measurements
  
• Use of Amp Clamp and flexible CT in DC and AC measures
  
• Use of AlberCellcorderfor use as a battery testing and maintenance tool for a multitude of various battery designs and chemistries
  
• Show understanding of proper use of:
  
• Isolation devices to control available voltage potentials.
  
• Necessary use of Arc-Flash suit and PPE.
  
• Show competency in the connections of series, parallel, and series-parallel battery strings.
  
• Understand torque values, torque-mark application, and visual inspection of completed battery cabinet installations.
  

• 
  
• Proficient knowledge of Microsoft Office including: Word, Excel.
  

• 
  
• OSHA 10-hour certification
  
• NFPA-70E Safety Training
  
• Supervisory Responsibilities:
  

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  
• CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
  

A Critical Systems Technician I, Connected is responsible for delivery of materials, unloading and loading materials from trucks, buildings and other containment structures, ability to transport/move job material throughout customer facilities, assist with job prep, startups, certifications, preventative maintenance, and scheduled maintenance for battery systems related to Uninterruptable Power Supply systems. A clean driving record is required for this role.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• 
  
• Assist with the battery replacements and new installations.
  
• Assist, as necessary, with preventative maintenance of batteries with minimal disruption to customer.
  
• Assist in the warehouse when needed.
  
• Interact effectively with internal and external customers.
  
• Follow operational, maintenance and emergency methods of procedure (MOPs)
  
• Ensure strict adherence to critical facility work rule and safety procedures.
  
• Ability to use hand and general maintenance tools and equipment.
  
• Keep job site clean during replacement, installs, and maintenance.
  
• Assist with work in other service divisions (Switch Gear, Operations, HVAC, etc.) as needed.
  
• Following instructions from Supervisors/Lead Technicians.
  
• Be able to unload and load batteries onto pallets/moving carts
  
• Package/prepare pallets of batteries for DOT compliant travel to jobs and scrap yards
  
• Ability and willingness to travel to job sites, do overnight travel, and work nights and weekends, as needed.
  
• Learntosafely operateequipment including but not limited to:
  
  • 
    
  • Company vans, trucks, stake body truck, and box truck.
    
  • Manual pallet jacks.
    
  • Electric pallet jacks.
    
  • Moving Carts/Dollies
    
  • Forklift.
    
  • Battery lifting tables.
    
  • Pallet shrink wrapping and banding equipment.
    
  • Electric drills/drivers.
    
  • Torque wrench.
    
  • Hand tools.
    
  • AlberCellcorder, Fluke BT521, Megger and Digital Hydrometerfor battery testing.
    
  
  
  

• 
  
• Regular and reliable attendance is an essential job function.
  
• Other duties as assigned by Services Management.
  
• Travel 30% or more
  
• Must be a US citizen
  
• Able to obtain security clearance is preferred
  

QUALIFICATIONS:

Education/Experience:

• 
  
• High School Diploma
  
• Clean driving records a must.
  
• Requires basic mechanical aptitude
  
• Elementary fix/repair techniques based on directed supervision.
  
• Knowledge of or ability to learn basic AC/DC theory, electronic components, and electronic circuitry.
  

Computer Skills:

• 
  
• Knowledge of Microsoft Office including: Word, Excel.
  

Certificates and Licenses:

• 
  
• OSHA 10-hour certification
  
• Must have or ability to obtain certification in DOT, First-Aid, CPR, Adult AED
  
• Pass NFPA-70E Safety training
  

Supervisory Responsibilities:

• 
  
• No supervisory responsibilities
  

Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• 
  
• While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must lift and carry up to 100 pounds on a regular basis.
  

The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1

• 
  
• Assist with the battery replacements and new installations.
  
• Assist, as necessary, with preventative maintenance of batteries with minimal disruption to customer.
  
• Assist in the warehouse when needed.
  
• Interact effectively with internal and external customers.
  
• Follow operational, maintenance and emergency methods of procedure (MOPs)
  
• Ensure strict adherence to critical facility work rule and safety procedures.
  
• Ability to use hand and general maintenance tools and equipment.
  
• Keep job site clean during replacement, installs, and maintenance.
  
• Assist with work in other service divisions (Switch Gear, Operations, HVAC, etc.) as needed.
  
• Work from schematic diagrams, sketches, and verbal instructions.
  
• Learn how todisconnect and connectsealedbatteries in cabinets and open racks.
  
• Learn how to build flooded cell batteryracks, and spill containment systems.
  
• Learn how to install flooded cell batteries onto rack systems in thecustomerscritical space.
  
• Learn how to enter pre-installation test readings into our reporting format thru laptop computer.
  
• Learn how to collect data from PM services and importinto files for reporting purposes.
  
• Gain experience from preventive maintenance, trouble diagnosis, routine and emergency maintenance and repairs with minimum direct supervision to DC batterysystems
  
• Regular and reliable attendance is an essential job function.
  
• Other duties as assigned by Services Management.
  

• 
  
• High School Diploma
  
• Clean driving records a must
  
• Safe operation of department equipment
  
• Elementary fix/repair techniques based on directed supervision
  
• Knowledge of or ability to learn basic AC/DC theory, electronic components, and electronic circuitry
  
• Complete training on:
  
• Use of Digital multimeter for AC and DC diagnostic measurements
  
• Use of Amp Clamp and flexible CT in DC and AC measures
  
• Use of AlberCellcorderfor use as a battery testing and maintenance tool for a multitude of various battery designs and chemistries
  
• Show understanding of proper use of:
  
• Isolation devices to control available voltage potentials.
  
• Necessary use of Arc-Flash suit and PPE.
  
• Show competency in the connections of series, parallel, and series-parallel battery strings.
  
• Understand torque values, torque-mark application, and visual inspection of completed battery cabinet installations.
  
• Must be a US citizen
  
• Able to obtain security clearance is preferred
  

• 
  
• Proficient knowledge of Microsoft Office including: Word, Excel.
  

• 
  
• OSHA 10-hour certification
  
• NFPA-70E Safety Training
  
• Supervisory Responsibilities:
  

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  
• CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
  

• 
  
• Install, assemble, and inspect electronic components during product assembly, per documented work instructions.
  
• Interpreting Job Routers, written instructions, wiring diagrams and schematic drawings for assembly of electronics.
  
• Performing a variety of inspections to ensure assemblies meet/exceed IPC standards.
  
• Performing pass downs with outgoing/incoming shifts. Using hand and/or power tools and jigs.
  
• Modifying, soldering, reworking, repairing assemblies and subassemblies according to specifications, drawings, and work instructions.
  
• Other duties as assigned by Lead or Supervisor.
  

• 
  
• Must have meticulous hand-eye coordination and manual dexterity.
  
• Typically 3-5+ years of electronics assembly and inspection experience with in-process soldering (both through hole and surface mount).
  
• Must be able to work for extended hours utilizing a microscope to perform inspection and solder touch-ups.
  
• Hand soldering experience is required. Knowledge of ESD (Electrostatic discharge) procedures.
  
• High School Diploma or GED.
  

• 
  
• Rework/repair, wire attach, and mechanical assembly.
  
• Must be detail oriented and able to multitask. IPC-610, J-STD-001 and 7711/7721 certification preferred.
  
• Good written and verbal communication skills.
  
• Must be able to work a flexible schedule in order to meet production and customer needs.
  
• 10 plus years related experience is preferred.
  

• Mercury Systems is a technology company that makes the world a safer, more secure place. We push processing power to the tactical edge, making the latest commercial technologies profoundly more accessible for today's most challenging aerospace and defense missions. From silicon to system scale, Mercury enables customers to accelerate innovation and turn data into decision superiority. Headquartered in Andover, Massachusetts, Mercury employs more than 2,300 people in 24 locations worldwide. To learn more, visit

• We are committed to making Mercury a great place to work, no matter where our employees are located. We offer a casual and enjoyable atmosphere that allows employees to learn and grow. We help and care for one another and work as one to achieve results for us and for our customers. We value communication and transparency, and strive to foster two-way dialogue at all levels of the organization. We are committed to lifelong learning, offering comprehensive skills training and tuition

• Develop, implement, and improve manufacturing processes for electronic products.
• Collaborate with R&D and design teams to ensure designs are manufacturable and cost-effective.
• Identify and troubleshoot production issues, providing effective solutions.
• Support process validation, equipment qualification, and production ramp-up activities.
• Implement Lean Manufacturing and continuous improvement initiatives.
• Develop and maintain work instructions, process documentation, and standard operating procedures.
• Analyze production data to identify trends, inefficiencies, and areas for improvement.
• Support supplier and internal audits related to manufacturing processes.

Qualifications:

• Bachelor’s degree in Electrical Engineering, Electronics Engineering, Mechanical Engineering, or a related technical field.
• 3+ years of experience in manufacturing engineering, preferably in electronics production.
• Strong understanding of PCB assembly, electronic components, soldering processes, and testing.
• Experience with process improvement methodologies: Lean, Six Sigma, Kaizen.

About American Meat Companies:

American Meat Companies was founded by Ron and Mariellen Day in a small meat locker in Anaheim, California. From our very modest beginnings in 1975, American Meat Companies has grown to become one of the largest meat purveyors in Southern California and has expanded to a brand new state-of-the-art facility in Dallas, Texas.We produce a full line of steaks, hamburger patties, pork chops, and poultry items, and we make them to your specifications.

We know meat. And it’s all we do. We are passionate about quality and we are extremely proud of the reputation we have earned over the past 46 years.

2nd Shift Industrial Maintenance Tech Job Summary:

Under the supervision of the Facilities & Maintenance Manager, you will be responsible for setting up, installing, repairing, and maintaining production/manufacturing equipment and machinery for a new start-up facility. Inspects equipment for proper functioning and performs preventative maintenance duties per manufacturer's specifications. Diagnosis equipment malfunctions and makes repairs or adjustments as needed. Responsible for assuring all work performed meets Product Safety and Quality, Employee Safety, and Legality of Policies and Procedures.

Essential Duties and Responsibilities:

1. Follow specifications of blueprints, manuals, and schematic drawings; install, maintain and repair

equipment, machinery, physical structures, and plumbing/electrical systems.

2. Inspect, measure, and test equipment while in operation visually (using electrical and electronic equipment) and auditory (listening for unusual sounds from machines or equipment) to detect malfunction, wear, misalignment, or other problems. Inspect used parts to determine changes in dimensional requirements.

3. Discuss/diagnose machine problems with the Maintenance Supervisor, Production Supervisor, Production Superintendent, Plant Manager, or other maintenance workers. Inform appropriate management personnel of equipment and parts needs.

4. Dismantle defective machines and equipment and install new or repaired parts. Reassemble and test machines.

5. Clean and lubricate shaft, bearings, gears, and other parts of machinery.

6. Install and repair electrical apparatus, such as transformers, wiring, and electrical and electronic components of machinery and equipment.

7. Layout, assemble, install and maintain pipe systems and related hydraulic and pneumatic equipment. Repair and replace gauges, valves, pressure regulators, and related equipment.

8. Install, program, and repair automated machinery and equipment, such as robots or programmable controllers.

9. Set up and operate machine tools, such as lathe, grinder, drill, and milling machine, to repair or fabricate machine parts.

Other Duties and Responsibilities:

1. Repair and maintain the physical structure of the establishment and perform preventative maintenance functions.

2. Assist production personnel in change-over and set-up procedures.

3. Attend safety classes/seminars as periodically scheduled.

Decision Making & Problem Solving: Responsible for troubleshooting, diagnosing, and repairing production equipment, including but not limited to industrial blenders, industrial mixers, automated packaging equipment, robotic equipment, pumps, valves, and pressure vessels.

Good Manufacturing Practices: Interprets GMP and HACCP regulations into Company and product-specific practices.

Production Support: Accountable for the efficient installation, maintenance, and repair of Electrical Controls and Mechanical machinery. Equipment includes but is not limited to Hydraulics Combo Dumpers, Meat Blenders, Grinders, Freezers, Scales, Labelers, Case Sealer, Baggers, Seasoning equipment, etc.

Project Management: Engages in cross-functional activities and collaborates across boundaries to ensure successful project implementation. Gathers information to interpret needs, assess requirements, and take the initiative to identify sound solutions through the application of expertise and knowledge. Must have a very strong customer service orientation with a high sense of urgency.

Quality System Compliance: Ensures the requirements of the Quality System, the Quality System Regulation (USDA, FDA), and other relevant standards are fulfilled.

Safety: Enforces Company safety policies and procedures. Responsible for the safe operation and performance of Maintenance and Facility.

Technical Documentation/Communication/Processes: Knowledge of preventive maintenance procedures / Total Productive Maintenance. Prior experience in Computerized Maintenance Management Systems.

Training & Development: Complete training and documentation thereof, in line with Company policies and procedures.

Other Compliance: Works to ensure compliance with all applicable laws and regulations issued by OSHA, EPA, Labor & Employment Law, and other federal, state, and local regulations, including Lock-out/Tag-out, confined spaces, and personal protection regulations.

Job Requirements (Education, Work Experience, Certifications, Skills)

Education: High school or equivalent (Required), Technical Degree (Preferred), technical training, or equivalent years' experience acceptable in place of formal education. Must be computer literate with proficiency in using CMMS systems.

Work Experience: Minimum five (5) years of industrial maintenance experience in manufacturing (Food Preferred); strong in precision maintenance, electro-mechanical troubleshooting, and other industrial skills to include pneumatic and hydraulic system knowledge with; experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings), product manuals (e.g., reading and applying knowledge to make repairs), troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns), and reading mechanical drawings (e.g., hydraulics, pneumatics); Experience with electrical systems to include low voltage control circuits, motor circuit controls, VFD s, PLC troubleshooting knowledge (Rockwell PLC/HMI knowledge), and electrical safety systems required.

Certifications: OSHA 40 (Preferred)

Skills:

Ability to communicate effectively with a variety of individuals.

Ability to work in a fast-paced environment.

Ability to reason, negotiate, instruct, persuade, or speak with others.

Ability to pay close attention to detail.

Strong interpersonal skills and judgment in communicating with staff.

Receptive to management development suggestions and willing to seek additional knowledge to facilitate job growth.

Excellent written and oral communication skills.

Proven ability to juggle multiple tasks simultaneously.

Ability to interpret HR regulations, safety rules, operating and maintenance instructions, and procedures manuals.

Ability to solve complex problems.

Fully competent to a high degree in mechanical knowledge.

Ability to troubleshoot electrical controls.

Ability to follow verbal and written instructions, as well as interpret pencil sketches and diagrams.

Ability to read ladder logic and use it to troubleshoot systems.

Other Duties and Responsibilities:

May be required to work overtime, evenings, or weekends to complete work. May be required to work flexible shifts, including on-call.

Other duties and tasks as assigned.

Job Type: Full-time

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Schedule:

• 2nd Shift
• Holidays
• Possible Overtime
• Weekends as needed

Work Location: In person

Job Description:

• $30.00-$35.00 per hour, depending on experience. 
• Sunday - Thursday 3rd shift hours starting around 6:00 pm:  Flexible on starting time 
• Benefits Day 1 of Employment.  Free Uniforms and Safety Boots

• Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much more
• Growth opportunities performing essential work to support America’s food distribution system
• Safe and inclusive working environment, including culture of rewards, recognition, and respect

• Complete and perform preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units) as well as identifying root causes of basic failures/conditions and perform repairs as required.
• Ensure equipment has required licensing and registration prior to being deemed as “roadworthy”.
• Complete thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.
• Install, replace, and repair onboard computers.
• Inspect brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.
• Perform routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.
• Performs other related duties as assigned. 

Qualifications:

Company description

Awards and Accolades

• 
  
• Use soldering irons to attach electronic components with SMT and Thru hole technologies.
  
• Interpreting job routers, written instructions, wiring diagrams and schematic drawings for assembly of electronics
  
• Performing a variety of inspections to ensure assemblies meet/exceed IPC standards
  
• Performing pass downs with outgoing/incoming shifts
  
• Modifying, soldering, reworking, repairing assemblies and subassemblies according to specifications, drawings, and work instructions
  
• Other duties as assigned by Lead or Supervisor
  

• 
  
• Will require an onsite soldering assessment to J-STD001 standards during the interview
  
• Must have meticulous hand-eye coordination and manual dexterity
  
• Must be able to work 2nd Shift hours, 2:30pm to 12:00am
  
• Typically requires 5+ years of electronics assembly and inspection experience with in-process soldering (both through hole and surface mount)
  
• Must be able to work for extended hours utilizing a microscope to perform inspection and solder touch-ups
  
• Hand soldering experience is required
  
• Knowledge of ESD (Electrostatic discharge) procedures
  
• High School Diploma or GED
  

• 
  
• Rework/repair, wire attach, and mechanical assembly
  
• Must be detail oriented and able to multitask
  
• IPC-610, J-STD-001 and 7711/7721 certification preferred
  
• Good written and verbal communication skills
  
• Must be able to work a flexible schedule in order to meet production and customer needs
  
• 10 plus years related experience preferred
  

• 
  
• Use soldering irons to attach electronic components with SMT and Thru hole technologies.
  
• Interpreting job routers, written instructions, wiring diagrams and schematic drawings for assembly of electronics
  
• Performing a variety of inspections to ensure assemblies meet/exceed IPC standards
  
• Performing pass downs with outgoing/incoming shifts
  
• Modifying, soldering, reworking, repairing assemblies and subassemblies according to specifications, drawings, and work instructions
  
• Other duties as assigned by Lead or Supervisor
  

• 
  
• Will require an onsite soldering assessment to J-STD-001 standards during the interview
  
• Must have meticulous hand-eye coordination and manual dexterity
  
• Must be able to work 2nd Shift hours, 2:30pm to 12:00am
  
• Typically requires 5+ years of electronics assembly and inspection experience with in-process soldering (both through hole and surface mount)
  
• Must be able to work for extended hours utilizing a microscope to perform inspection and solder touch-ups
  
• Hand soldering experience is required
  
• Knowledge of ESD (Electrostatic discharge) procedures
  
• High School Diploma or GED
  

• 
  
• Rework/repair, wire attach, and mechanical assembly
  
• Must be detail oriented and able to multitask
  
• IPC-610, J-STD-001 and 7711/7721 certification preferred
  
• Good written and verbal communication skills
  
• Must be able to work a flexible schedule in order to meet production and customer needs
  
• 10 plus years related experience preferred