Electro Mechanical Engineering Jobs in Usa

About Ideavillage

Ideavillage is a leading consumer products company behind nationally recognized brands including Copper Fit, MicroTouch, Finishing Touch, and Flawless. We design, develop, and launch innovative hardline items—including grooming tools, shavers, vibration/fitness products, and small battery‑powered devices—distributed across 60,000+ retail locations such as Walmart, Target, CVS, Walgreens, and Dick’s Sporting Goods.

We are expanding our engineering capabilities to support rapid product development with overseas manufacturing partners.

Position Overview

We are seeking a hands‑on Product Engineer with both electrical and mechanical engineering experience to lead the technical development of our growing portfolio of small appliances, grooming tools, vibration devices, and battery‑powered products.

This engineer will partner closely with overseas factories (primarily Asia) to ensure that every new product is engineered for performance, safety, manufacturability, and cost. The role spans concept validation through mass production.

Key Responsibilities

Product Development & Engineering

• Lead engineering efforts across the full product lifecycle: concept → prototypes → EVT/DVT/PVT → production
• Review and refine mechanical and electrical designs (motors, PCBA, wiring, charging systems, battery packs)
• Conduct technical tear‑downs, competitive benchmarking, and feasibility assessments
• Create and maintain technical documentation:
• Specifications
• Engineering drawings
• Test protocols
• Validation reports
• ECNs (Engineering Change Notices)

Factory & Supplier Engagement

• Collaborate daily with overseas factories (China, Vietnam, Thailand, etc.)
• Guide suppliers on design intent, DFM (Design for Manufacture), and tooling considerations
• Support pilot builds, pre‑production runs, and troubleshooting during scale‑up

Testing, Validation & Compliance

• Develop and execute testing protocols for safety, durability, vibration, noise, electrical performance, charging, and reliability
• Support compliance activities (UL, CE, FCC, CSA, Intertek, etc.)
• Perform root cause analysis (RCCA) on failures and implement corrective actions

Cross‑Functional Collaboration

• Work closely with Product Development, QA, Supply Chain, and Leadership
• Communicate technical risks, design changes, timelines, and validation status

Required Qualifications

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or related discipline
• 3–5+ years engineering experience in consumer products, small appliances, personal care devices, electronics, or similar
• Strong hands‑on engineering background in both mechanical & electrical systems
• Experience with offshore manufacturing and ODM/OEM development
• Familiarity with regulatory and safety compliance (UL, CE, FCC, etc.)
• Skilled in root cause analysis and corrective action methodologies
• Strong communication skills and ability to produce clear technical documentation

Preferred / Bonus Skills

• Experience with:
• Motors and vibration systems
• Lithium‑ion batteries, charging circuits
• Shavers/grooming tools or similar electromechanical devices
• Proficiency with test equipment: oscilloscopes, multimeters, power supplies, electronic loads, spectrum analyzers
• CAD experience (SolidWorks or similar) a plus
• Mandarin/Cantonese conversation skills a plus (not required)

Travel

• Domestic and international travel: 3–5 times/year for factory visits, pilot builds, and product validations.

The Opportunity

The Department of Mechanical and Aerospace (MAE) at the University of Central Florida (UCF) in Orlando, Florida, invites applicants for multiple 9-month, full-time, non-tenure earning lecturer or associate lecturer positions with an anticipated start date of August 08, 2026. The selected candidates will be primarily responsible for teaching undergraduate courses and some graduate courses in mechanical or aerospace engineering offered by the department.

The MAE Department offers B.S., M.S., and Ph.D. degree programs. Both BSAE and BSME programs are ABET-accredited. The reputation of the department and university is continually growing with numerous faculty achievements including NSF CAREER awards, an ONR Young Investigator Award, and fellowships in professional societies. More information about the department can be found at Qualifications:

• 
  

• An earned doctorate from an accredited institution in mechanical engineering, aerospace engineering or a closely related field at the time of application.

  
  

• An associate lecturer must also have at least five years of full-time teaching experience in a higher education institution.

  
  

Preferred Qualifications:

• 
  

• Excellent written and oral communication skills in English.

  
  

• Previous teaching experience at the university level in the United States.

  
  

• Commitment to teaching excellence and passion for engineering education research.

  
  

• Demonstrated teaching effectiveness in mechanical and aerospace engineering courses.

  
  

Additional Application Materials Required:

UCF requires all applications and supporting documents be submitted electronically through the Human Resources employment opportunities website, addition to the online application, candidates should upload a cover letter, and a current curriculum vitae.

The selected candidate will be required to submit official transcripts (and, as applicable, U.S. degree equivalency evaluations) documenting the conferral of their qualifying academic credentials.

NOTE: Please have all documents ready when applying so they can be simultaneously uploaded. Once the online submission process is finalized, the system does not allow applicants to submit additional documents later.

Questions regarding this search should be directed to: Diana Perez, Administrative Assistant III, at .

Special Instructions to the Applicants

Sponsorship for employment-based visas will only be considered under exceptional circumstances and is not guaranteed. Preference will be given to candidates who are currently authorized to work for any employer in the United States.

Job Close Date:

Open until filled.

Note to applicants: Please keep in mind that a job posted as 'Open until filled' may close at any time without notice. As such, we encourage you to submit your application and all required documentation as quickly as possible to ensure consideration for the posted position.

Are you ready to unleash YOUR potential?

As a next-generation public research university and Forbes-ranked top employer in Florida, we are a community of thinkers, doers, creators, innovators, healers, and leaders striving to create broader prosperity and help shape a better future. No matter what your role is, when you join Knight Nation, you'll play an integral role at one of the most impactful universities in the country. You'll be met with opportunities to connect and collaborate with talented faculty, staff, and students across 13 colleges and multiple campuses, engaging in impactful work that makes a positive difference. Your time at UCF will provide you with many meaningful opportunities to grow, you'll work alongside talented colleagues on complex projects that will challenge you and help you gain new skills and you'll have countless rewarding experiences that go well beyond a paycheck.

Working at UCF has its perks!UCF offers:

• 
  
• Benefit packages, including Medical, Dental, Vision, Life Insurance, Flexible Spending, and Employee Assistance Program.
  
• Paid time off, including annual (12-month faculty) and sick time off and paid holidays.
  
• Retirement savings options.
  
• Employee discounts, including tickets to many Orlando attractions.
  
• Education assistance.
  
• Flexible work environment.
  
• And more...For more benefits information, view the UCF Employee Benefits Guide click here.
  

Unless explicitly stated on the job posting, it is UCF's expectation that an employee of UCF will reside in Florida as of the date the employment begins.

Additional Requirements related to Research Positions:

Pursuant to Florida State Statute 1010.35, prior to offering employment to certain individuals in research-related positions, UCF is required to conduct additional screening. Applicants subject to additional screening include any citizen of a foreign country who is not a permanent resident of the U.S., or who is a citizen or permanent resident but is affiliated with or has had at least 1 year of education, employment, or training in China, Cuba, Iran, Russia, North Korea, Syria, or Venezuela.

The additional screening requirements only apply to research-related positions, including, but not limited to faculty, graduate positions, individuals compensated by research grants or contract funds, post-doctoral positions, undergraduate positions, visiting assistant professors, and visiting research associates.

Department

Work Schedule

Type of Appointment

Expected Salary

As a Florida public university, the University of Central Florida makes all application materials and selection procedures available to the public upon request.

UCF is proud to be a smoke-free campus and an E-Verify employer.

If an accommodation due to a disability is needed to apply for this position, please call or email .

For general application or posting questions, please email .

About Us

Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects.

The Role We Want You For

The Mechanical Preconstruction Manager will participate in all aspects of the preconstruction process for mechanical systems to develop accurate, detailed cost estimates, often based on conceptual or schematic designs with a focus on heavy/ advanced manufacturing, industrial and mission critical projects. This role is expected to interact with engineers, architects, consultants, owner’s representatives, subcontractors, suppliers, a multi-discipline estimating team, senior management, project supervision, and field personnel.

The Specifics of the Role

• Responsible for the collection and distribution of bid documentation relative to RFPs, and solicitation for bid requests using online platform (Autodesk Building Connected).
• Assist in gathering information to complete Bid Qualification and Criteria requirements.
• Attend pre-bid meetings to become familiar with unique project requirements and analyze existing site conditions to determine required scope that is not already indicated.
• Review and interpret project documents to determine job-specific material, equipment, and labor requirements for scope development.
• Prepare written scopes of work for subcontracts and suppliers and coordinate mechanical scopes with the work of other trades (e.g., civil, structural, architectural, electrical, etc.).
• Participate in pre-proposal design coordination meetings to support the development of pricing documents for conceptual estimates.
• Perform constructability analysis of project documents. Communicate design and constructability issues to the project team, while identifying risk elements and appropriate mitigation measures.
• Provide viable design alternatives and value engineering propositions with analysis supporting benefits to initial and life cycle cost, schedule, maintenance, etc.
• Perform quantity survey of mechanical systems and components using digitized software, and apply industry standard labor rates (e.g., MCAA, PHCC, etc.) to develop accurate cost estimates.
• Evaluate vendor and subcontractor for conformance with proposal requirements; level scopes and identify low cost/ best value responses while capturing assumptions, rationale, inclusions, exclusions, etc.
• Prepare estimates used for bidding and budgeting purposes (including self-performed work); participate in internal estimate review process and assist with final recap of estimate for presentation to senior management.
• Support project management tasks, including budgeting, schedule development, interim design review, change order pricing, procurement, value engineering, and vendor selection based on proposal development.
• Coordinate with project teams to evaluate productivity for historical data and schedule/ cost forecasting purposes.
• Maintain and improve supplier and subcontractor database utilizing the company’s prequalification program.
• Supervise junior estimators, estimating assistants and/or Interns, providing training and support in a mentoring capacity and review work products for quality control.
• Assist in the organization and maintenance of estimating software material cost databases to ensure accurate costs are consistently utilized on bids; communicate data on construction and material cost trends affecting project costs to project teams.
• Identify opportunities for improvement in departmental processes, approach, and execution of estimating and preconstruction functions; assist in creating or adopting new tools to maximize productivity with the lowest attendant value of acceptable risk.

Requirements

• Bachelor’s Degree in Mechanical Engineering, or other Engineering discipline, Construction Management, or related field, or a combination of education (including trade schools) and professional experience.
• 5-10 years of experience in preconstruction/estimating with a focus on mechanical systems (i.e., Fire Protection, HVAC, Plumbing, Piping).
• Exhibits inclusive leadership and teamwork behavior, and values diverse perspectives from team members.
• Demonstrated experience in the successful management of bidding process for conceptual estimates with a preferred emphasis on heavy/ advanced manufacturing, industrial and mission critical markets.
• Working knowledge of codes and standards applicable to the design and installation of mechanical systems.
• Working knowledge of construction contract language and terms in addition to various contractual delivery methods (e.g., negotiated, hard bid, design assist, GMP, etc.)
• Possesses strong technical writing, math and computer skills with proficiency using standard office software applications such as Bluebeam, Microsoft Excel, Word, and PowerPoint to support estimating efforts.
• Proficiency using estimating software with a preference for Trimble products.

Some Things You Should Know

• Our clients and projects are nationwide – Travel will be required.
• No other builder can offer the collaborative design-build approach that Clayco does.
• We work on creative, complex, award-winning, high-profile jobs.
• The pace is fast!

Why Clayco?

• 2025 Best Places to Work – St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal.
• 2025 ENR Midwest – Midwest Contractor (#1).
• 2025 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5).
• 2025 ENR Top 100 Green Contractors – Green Contractor (Top 3).
• 2025 ENR Top 25 Data Center Builders – Data Center Contractor (Top 3).

Benefits

• Discretionary Annual Bonus: Subject to company and individual performance.
• Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more!

Compensation

• The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. It is not typical for an individual to be hired at or near the top of the range for the role and compensation decisions are dependent on the facts and circumstances of each case. The Clayco Nationwide salary range for this position is approximately $90,000 - $130,000 +/- annually (not adjusted for location).

Mechanical Design Engineer, HVAC

Location: On-site in Roanoke, VA – assistance with relocation available

Employment Type: Full-Time, On-Site

An industry leader in energy-efficient, precision-engineered air systems is seeking an experienced HVAC Mechanical Design Engineer to contribute to the next generation of cooling technologies for mission-critical infrastructure. This is a high-impact engineering role where innovation, sustainability, and performance intersect. With a growing market presence and a strong commitment to R&D, this organization is driving breakthroughs in large-scale HVAC design for data centers and other high-load environments.

This role offers a unique opportunity to work on cutting-edge thermal management technologies, alongside top engineering talent in a collaborative, growth-minded environment. Relocation support is provided, with a generous $25K lump sum reimbursement issued with your first paycheck.

Key Responsibilities:

• Design and optimize complex HVAC systems that emphasize energy efficiency, thermal performance, and long-term sustainability.
• Select and specify major components (heat exchangers, fans, compressors) tailored to application-specific requirements.
• Analyze refrigeration cycles to maximize operational efficiency and reliability.
• Interpret electrical schematics and collaborate with controls engineers to enhance system integration and usability.
• Participate in prototype development, system validation, and iterative design refinement based on performance testing.
• Interface with internal and external stakeholders to translate technical requirements into actionable solutions.
• Stay current on HVAC industry trends and compliance standards to ensure engineering excellence.

Qualifications:

• Bachelor’s degree in mechanical engineering or related field.
• Minimum 5 years of HVAC system design experience in industrial, commercial, or mission-critical applications.
• In-depth knowledge of refrigeration systems, component interactions, and performance optimization strategies.
• Adept at deciphering electrical schematics and incorporating them into the blueprint for HVAC systems
• Extensive background in specifying and evaluating key mechanical components, including compressors, airflow systems, and thermal transfer equipment.
• Demonstrated ability to lead engineering projects from concept through execution.

Bonus Skills:

• Hands-on experience with CAD for HVAC system layout.
• Exposure to chiller systems, industrial refrigeration, or data center cooling is a plus.
• Familiarity with testing, troubleshooting, and commissioning of HVAC products.

What’s In It For You:

• Competitive compensation with long-term career growth potential.
• Work on high-profile R&D initiatives that directly impact next-gen product innovation.
• Be part of a collaborative, mission-driven team solving complex engineering challenges.
• Comprehensive benefits package including healthcare, 401(k), and paid time off.

This is a prime opportunity for an HVAC expert ready to take ownership of advanced system design projects and help shape the future of green cooling technologies. Apply now to connect with our recruiting team and learn more about the full scope of this role.

About Blue Signal:

Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at /46Gs4yS

Compensation: $90,000 – $100,000 per year

Location: Grand Rapids, MI

Benefits:

• Comprehensive health insurance
• Dental and vision coverage
• Paid holidays
• Paid time off (PTO)
• 401(k) retirement plan

Position Summary

We are seeking an experienced Senior Mechanical Estimator to lead cost estimating efforts for complex mechanical construction projects. This role is responsible for developing accurate, competitive estimates for HVAC, plumbing, piping, and fire protection systems while supporting preconstruction strategy and project success.

The ideal candidate brings strong technical knowledge, sound judgment, and leadership capability, with the ability to mentor junior estimators and collaborate effectively across engineering and project management teams.

Key Responsibilities

• Prepare accurate cost estimates and budgets for mechanical systems
• Review drawings, specifications, and design documents
• Identify risks and provide value-engineering recommendations
• Mentor junior estimators and review their work
• Collaborate with engineering and project management teams during bid development

Qualifications

• Bachelor’s degree in Mechanical Engineering, Construction Management, or a related field (preferred)
• 3–5+ years of experience as a mechanical estimator in the construction industry
• In-depth knowledge of HVAC, plumbing, piping, and fire protection systems
• Proficiency with estimating software and Microsoft Office Suite
• Strong analytical, mathematical, and problem-solving abilities

Why Join Us?

• Be part of a respected mechanical construction organization with a strong regional presence
• Competitive salary
• Supportive, team-oriented culture with opportunities for professional growth and advancement

The Industrial Automation Engineering Director is responsible for leading a team of engineers focused on the successful execution of manufacturing engineering projects. This includes overseeing all aspects of project implementation, from initial processing, design and development to final production launch at the assembly site. The Execution Senior Manager will work closely with cross functional teams to ensure projects are delivered on time, within budget, and to the highest quality standards. This individual will be involved with setting the direction for the future of our manufacturing process. This position takes on a high level of independent decision making and communication as the lead onsite during project installation and startup.

Job Responsibilities

• Develop and implement project plans, investment required, timelines, and budgets.

• Monitor project progress, identify and resolve roadblocks, and mitigate risks.

• Ensure adherence to engineering standards, best practices, bill of process, bill of equipment, safety, and regulatory requirements.

• Collaboration with internal teams and external vendors to generate high-quality, cost-effective solutions in very short periods of time.

• Lead comprehensive end-to-end warehouse design projects from conceptualization to implementation

• Stay abreast of industry trends and emerging technologies in manufacturing engineering.

• Bachelor's degree required in mechanical engineering, electrical engineering, industrial

engineering etc; Master's degree preferred in Industrial Engineering, Supply Chain

Management, or related field

• 8+ years of progressive experience in warehouse/distribution center design and

optimization in large-scale projects

• Demonstrated track record of end-to-end warehouse design implementations

• Strong proficiency in project management methodologies, such as Agile and Six Sigma,

ensuring efficient project execution and continuous improvement.

• Experience with processing equipment, throughput, and comprehensive understanding

of manufacturing processes, enabling effective design and production.

• In-depth knowledge of lean manufacturing principles and continuous improvement

methodologies, fostering operational efficiency and waste reduction.

• A strong understanding of safety regulations and procedures, ensuring a safe working

environment for all team members.

• Experience in a high-volume manufacturing environment, demonstrating the ability to

thrive in fast-paced settings. Experience with reliability and maintainability of

processing equipment, standalone availability, and throughput.

Salary: $180,000 + bonus

Summary:

The Senior Manufacturing / Process Engineer is responsible for developing, implementing, and improving manufacturing processes for electronic assemblies in a high-mix, low-volume environment. This role supports both the U.S. and Vietnam facilities, ensuring process repeatability, cost efficiency, and product quality across SMT, Through-Hole, and system assembly operations. The senior manufacturing process engineer will report directly to the VP of operations.

Goals:

• Build products and provide services with the highest Flexibility, Productivity, and Quality.
• Achieve total customer satisfaction through technical excellence and responsive engineering support.
• Ensure successful NPI launches through cross-functional collaboration, process validation, and data-driven feedback to design and quality teams.

Objectives:

1.      Support production operations in the following categories:

a.      Reduce downtime caused by engineering issues (programming, MPI errors, tooling, design, or line stoppage).

b.      Improve quality yield through root cause analysis, corrective actions, and robust process setup.

c.      Lead NPI and prototype builds, ensuring process readiness, documentation completeness, and manufacturability validation prior to production release.

2.      Provide engineering services to meet customer needs and expectations in the following areas:

a.      Design for Manufacturability (DFM).

b.      Manufacturing Process Instruction (MPI) creation and maintenance.

c.      Engineering Change Order (ECO) implementation.

d.      Defect Reduction Team (DRT) meetings and follow-up actions.

e.      Failure analysis and corrective action documentation.

f.       Develop and validate new or modified processes, including process capability studies, DOE validation, and reflow/wave solder profile optimization

g.      Other engineering requests as required by customers or management.

Job Description:

SMT / Through-Hole / 2nd Ops / 3rd Ops Process Support

1. Review daily SMT or build schedule to ensure process readiness.
2. Confirm all required items are complete and available prior to production:
3. Job package with full build documentation.
4. Manufacturing Process Instruction (MPI) reviewed and approved.
5. Routing definitions for data collection.
6. Validated reflow or wave solder profiles.
7. ECOs, deviations, or special instructions incorporated into the MPI and/or job package.
8. All required tooling available and verified.
9. Review pre-build DFM, document known defects, and hyperlink details in the MPI.
10. Lead cross-functional NPI kickoff meetings to review design requirements, risk areas, and special process considerations.
11. Document and track NPI issues and lessons learned for future builds.
12. Coordinate with Program Managers to resolve DFM showstoppers prior to build.
13. Analyze previous quality data, identify recurring defects, determine root causes, and implement corrective actions.
14. Design, order, and verify all required tooling (stencils, wave solder pallets, press-fit fixtures, conformal coat fixtures, etc.).
15. Maintain tooling logs, labeling, and readiness tracking within Omega Build Readiness.
16. Inspect and sign off first article setups for critical processes (stencil printer, reflow oven, wave solder, etc.) using the First Article Checklist.
17. Inspect initial boards after print and reflow for solder release, bridging, voids, and process anomalies. Document findings and sign off the First Article Report.
18. Provide on-the-floor training for operators and technicians regarding new processes, corrective actions, or observed deficiencies.
19. Support production by promptly responding to technical inquiries or line support issues.
20. Exercise full authority to stop the line if repeated defects or safety concerns are observed.

Quality Data Review & Root Cause Analysis

1. Review production data in Omega Data Collection, identifying root causes and corrective actions.
2. Review Daily, Weekly, and Customer Quality Reports to identify trends, recurring issues, or process gaps.
3. Provide structured analysis and report findings to Quality and Production (using 8D or equivalent methodology).
4. Document corrective actions and verify implementation during the next production run.
5. Present findings and improvement updates in internal and customer quality meetings.

Other Responsibilities:

1. Create and submit Post-Build DFM reports to Program Managers with improvement recommendations.
2. Implement and validate ECO changes per revision control procedures.
3. Perform and document detailed failure analyses for internal and customer returns.
4. Participate in process improvement projects and defect-reduction initiatives.
5. Provide customer-driven engineering services or special support requests.
6. Develop and deliver internal technical training for operators and peers.
7. Support ISO 9001 and AS9100 activities, including audits, documentation, and Work Instruction updates.

Qualifications:

• Bachelor’s degree in Manufacturing, Industrial, or Mechanical Engineering (or related discipline).
• 8–12 years of hands-on experience in electronics manufacturing (PCBA, box-build, system integration).
• Deep understanding of SMT, Through-Hole, and system assembly processes.
• Proficient in process validation, FAI, SPC, DOE, and yield improvement.
• Familiarity with FactoryLogix and related MES/ERP systems.
• Experience leading NPI builds and developing new assembly processes from prototype through production release.
• Familiarity with DFM/DFT analysis tools and PCB CAD systems (e.g., Altium, Valor, Mentor).
• Experience with Lean, Six Sigma, and structured problem-solving tools.
• Strong communication and analytical skills with the ability to multitask in a fast-paced environment.
• U.S. Citizen or Permanent Resident (ITAR requirement).

Compensation:

$120-$150K Annually

Benefits:

Medical

Dental

Vision

401K + Roth 401K

Vacation

Paid Holidays

Role Summary

Position Overview: The Mechanical Project Manager will be responsible for the planning, coordination, and execution of sheet metal and HVAC projects in commercial and industrial settings. This role requires a seasoned professional with extensive experience in managing large-scale mechanical projects, ensuring they are completed on time, within budget, and to the highest quality standards.

Key Responsibilities:

• Lead and manage mechanical projects focusing on sheet metal and HVAC systems in commercial and industrial buildings.
• Develop and oversee project plans, schedules, and budgets, ensuring alignment with project objectives and client expectations.
• Coordinate with clients, architects, engineers, and subcontractors to ensure seamless project execution.
• Supervise and mentor project team members, fostering a collaborative and efficient work environment.
• Conduct regular site visits to monitor progress, quality, and compliance with safety regulations.
• Prepare and review project documentation, including contracts, change orders, and progress reports.
• Identify and mitigate project risks, addressing any issues that arise promptly and effectively.
• Ensure adherence to industry standards, codes, and regulations throughout the project lifecycle.
• Facilitate effective communication and collaboration among all project stakeholders.

Qualifications:

• Bachelor's degree in Mechanical Engineering, Construction Management, or a related field.
• Minimum of 10 years of experience in project management, specifically in sheet metal and HVAC systems within commercial and industrial construction.
• Proven track record of successfully managing large-scale mechanical projects from inception to completion.
• Strong knowledge of HVAC and sheet metal systems, installation practices, and industry standards.
• Excellent leadership, organizational, and communication skills.
• Proficiency in project management software and tools (e.g., MS Project, Procore).
• Ability to work effectively under pressure and meet tight deadlines.
• Professional Engineer (PE) license or PMP certification is a plus.

• Application Instructions: To apply, please submit your resume and cover letter detailing your relevant experience and qualifications to [contact email]. Please include "Senior Mechanical Project Manager (Sheet Metal & HVAC)" in the subject line of your email. We look forward to reviewing your application! Email to

Benefits:

• 401(k) matching
• Dental insurance
• Employee discount
• Health insurance (Free plan for one individual employee)
• Life insurance- $20,000 life insurance after 6 months
• Paid time off
• Parental leave
• Referral program
• Relocation assistance
• Vision insurance

Schedule:

• 10 hour shift

Supplemental pay types:

• Bonus opportunities

• 
  
• Design/construction-focused Instrumentation / Fire Alarm Engineer working on projects that enable the heart of our clients' business, including state-of-the-art industrial and commercial facilities.
  
• Accountable for schedule and technical quality of challenging engineering tasks while gaining familiarity with the client's expectations, scope, budget, and schedule.
  
• Provide on-site assistance during startup, coordinate work activities with other staff members and the discipline lead.
  
• Produce designs for electrical circuits and panels utilizing control applications.
  
• Design control systems for a variety of processes and develop options/optimizations for all aspects of process control, instrumentation, and automation.
  

• 
  
• Bachelor's degree from an ABET-accredited program in Electrical, Fire Protection, Chemical, or Mechanical Engineering.
  
• Engineer in Training (EIT) certification.
  
• At least 4 years of experience working with Instrumentation & Controls (I&C) / Life Safety Systems (LSS).
  
• Ability to generate complete I&C/LSS design packages (e.g. P&IDs, I/O lists, wiring diagrams, control narratives, etc.) with minimal supervision/oversight.
  
• Working knowledge of PLC, DCS, and other controls applications.
  
• Working knowledge of Fire Alarm and Life Safety System regulations/requirements.
  

• 
  
• Professional Engineer (PE) license.
  
• Fire Alarm System NICET Certification.
  
• Experience related to semiconductor fabrication facilities.
  
• Experience reviewing vendor submittal packages against client requirements and specifications.
  
• Field experience interacting with subcontractors and construction personnel.
  
• Working knowledge of AutoCAD and Navisworks software.
  
• Working knowledge of UL 508A for industrial control panel design.
  
• Working knowledge of NFPA 72 for fire alarm and signaling code.
  
• Familiarity with Siemens PLC systems.
  
• Familiarity with Edwards EST3 and EST4 Fire Alarm Control Systems.
  
• Strong verbal and written communication skills.
  
• Strong analytical and problem-solving skills.
  
• Forward thinking, eager to learn best practices, and contribute with innovative ideas.
  
• Displayed ability to learn quickly and driven to broaden knowledge base.
  
• Ability to collaborate and work effectively in a variety of teams, including multi-disciplinary teamsPassion for buildings and construction.
  

• 
  
• This is an on-site position requiring work to be performed on the client site in Boise, ID.
  
• Candidate must be willing to commute to the site Monday-Friday during normal business hours - nominally 8:00 am to 5:00 pm with some flexibility based on ability of site to support and employee preference.
  
• Relocation assistance may be provided for qualified candidate.
  

• 
  
• Position requires field visits and walks at an active client site in various stages of construction.
  
• Applicant must be able to walk long distances, sit and stand for extended periods, bend, stoop, twist, crawl, climb ladders, work on catwalks, work in small spaces, lift and carry up to 25lbs.
  

• 
  
• Applicant must complete background check, drug screen and be fully authorized to work for any client in the United States. Client will not sponsor or continue a visa for this position.
  

Hydraulic Design Engineer

Location: Raleigh, NC

Salary: Commensurate with experience + Benefits

About the Role

Wetherill Engineering, Inc. (WEI) is seeking a Hydraulic Design Engineer to support transportation and roadway drainage projects. This role involves hydrologic and hydraulic analysis, stormwater system design, and collaborating with multidisciplinary teams to deliver high-quality solutions.

Key Responsibilities

• Design and analyze roadway drainage, stormwater management, and erosion control systems.
• Perform hydrology and hydraulic analysis for transportation projects.
• Develop plans for stormwater management systems, bridge and culvert hydraulics, and BMPs.
• Utilize MicroStation, GEOPAK Drainage, HEC-RAS, Open Roads Designer, and SUDA.
• Assist in fieldwork to verify site conditions.
• Support project coordination and provide technical direction.

What You Bring

• B.S. or M.S. in Civil Engineering (or related field).
• P.E. license preferred (or ability to obtain).
• 5+ years of transportation hydraulic design experience (NCDOT projects preferred).
• Proficiency in MicroStation, Microsoft Office, and Adobe Acrobat.
• Strong understanding of NCDOT Guidelines, FHWA Hydraulic Design Manual, and erosion control.
• Excellent communication, teamwork, and problem-solving skills.
• Experience or willingness to manage projects is a plus.

Why WEI?

• Competitive salary + health, dental, vision, life, and retirement benefits.
• ESOP, SPSF, HUB-certified firm.
• Ranked among Top MWBE Firms and Top 74 Southeast Engineering Firms (ENR).
• Supportive and collaborative work environment with growth opportunities.

Equal Opportunity Employer | No sponsorship available.

Apply on LinkedIn, at , or email for more information.

This description is not a comprehensive listing of activities, duties, or responsibilities that may be required of the employee and other duties, responsibilities, and activities may be assigned or may be changed at any time with or without notice.

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Manufacturing Manager at Reliable Robotics, you'll be responsible for manufacturing capacity and throughput, factory development and layout, leading a team of engineers and technicians, and improving our manufacturing processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will have overall accountability for the manufacturing output of a broad portfolio of products, including mechanical, electromechanical, and/or electrical/avionics assemblies. You will also be responsible for leading hiring activities, managing manufacturing layout, equipment maintenance, optimizing manufacturing flow, ensuring tooling and and working with engineering on design for excellence (DFx) improvements. They also handle workforce development, production scheduling, risk mitigation, and performance monitoring to meet production targets. You are responsible for establishing the standards by which this team would operate, and for transitioning the organization from a start-up into a disciplined manufacturing organization. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.

Responsibilities

• Responsible for building, testing, troubleshooting/diagnosing, inspecting, and maintaining Reliable-designed mechanical, electromechanical, and/or electrical/avionics assemblies, harnesses, and interconnects

• Lead, coach, and provide technical mentorship to a team of engineers and technicians; write bi-annual reviews and manage the team's performance

• Lead hiring, recruitment, and training for the technician team

• Lead efforts to transition our products from engineering development to production

• Ensure design for excellence (DFx) is communicated to the engineering and drive implementations across all manufacturing areas to improve cost, producibility, inspectability, consistency, adequacy, accuracy, and achieve conformance to requirements

• Responsible for maturing the manufacturing factory and layout, including optimizing material flow, factory equipment (e.g., tooling, inspection, test, etc.) maintenance, tooling, automation, and business system

• Monitor and communicate manufacturing status and risks, and establish key performance metrics to meet manufacturing targets

• Partner with design, engineering, supply chain, and other departments to synchronize project plans and ensure manufacturing can meet demand

• Develop and ensure compliance with all policies, procedures, quality management systems, and engineering change orders

• Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained

• Ensure root-cause analysis is implemented and timely corrective actions are taken to maintain schedule, quality, and reliability

Basic Success Criteria

• Bachelor's degree in mechanical, electrical, aerospace, or systems engineering

• 5+ years of manufacturing, design, and/or testing experience

• 3+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

• Strong leadership, communication, team-building, and problem-solving skills

Preferred Success Criteria

• Experience with assembly, machining, fabrication, soldering, Electro-Static Discharge (ESD), Foreign Object Debris (FOD), and test methods

• Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment

• Research and Development (R&D) or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Previous leadership or management experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $130K - $195K

With a passion for life

Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers.

Are you looking for an inspiring career? You just found it.

Job Overview

Effectively design, develop, and document medical devices and medical equipment that satisfy internal and external customer needs and business objectives.

Job Responsibilities and Essential Duties

* Interprets customer specifications to define requirements for mechanical designs.

* Performs first principal analysis related to appropriate aspects of mechanical design.

* Provide support to peers, Jr Engineers, and Co-Ops.

* Applies the 3D CAD system to create mechanical design and drawings.

* Develops detailed fabrication and assembly drawings and performs tolerance analysis.

* Develop prototypes for design evaluation.

* Troubleshoot and resolve design & processing issues.

* Contributes to details of design documentation using electronic documentation systems.

* Collects, analyzes, and interprets data to propose recommendations.

* Develops & execute design verification protocols and technical reports.

* Work with internal and external resources on fabrication, inspection, and testing of new product parts and assemblies.

* Develop & debug prototype tooling / equipment and processes.

* Develop test methods and fixtures.

* Formulate plans & methods to accomplish assignments with appropriate oversight.

* Works independently and prioritizes assigned tasks with guidance.

* Contribute to project planning activities.

* Train technicians and operators on new process techniques.

Minimum Requirements

* BS in engineering discipline, mechanical preferred.

* Minimum 2-4 years related experience, or an MS and less than one year experience.

* Experience with a solid modeling CAD program, preferably SolidWorks and/or ProE.

* Experience in medical equipment / device design with experience in electromechanical, electro- pneumatic, and/or blood pumping equipment development.

* Knowledge in medical device industry regulations and practices - ISO 13485, ISO 7198 & GMP.

* Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat.

* Experience with Microsoft Visio and Microsoft Project preferred.

Required Knowledge, Skills, and Abilities

* Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software.

* Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable.

* Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable.

* Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data.

* Experience with electronic document control systems in medical device and/or medical equipment design and development.

* Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis.

* Ability to create and meet scheduled timelines (manage and coordinate tasks as required).

* Ability to work in a team environment.

* Strong communication skills.

* Competent in use of Microsoft Office tools.

* Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM's and oscilloscopes.

* Familiarity and the ability to operate basic shop equipment such as hand tools, a drill and Dremel.

* Understand and interpret simple wiring diagrams.

* Familiarity with Agile Scrum and waterfall project planning methods

This is a "Defined Term" assignment that will last approximately 6 months or until project is complete. Defined Term employees are eligible for most benefits (including health insurance and paid time off) while on assignment.

#LI-AS1

About us

With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries.

Benefits at Getinge:

At Getinge, we offer a comprehensive benefits package, which includes:

• 
  
• Health, Dental, and Vision insurance benefits
  
• 401k plan with company match
  
• Paid Time Off
  
• Wellness initiative & Health Assistance Resources
  
• Life Insurance
  
• Short and Long Term Disability Benefits
  
• Health and Dependent Care Flexible Spending Accounts
  
• Commuter Benefits
  

Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.