Education And Training Jobs in Bothell Wa Remote

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett, Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.

• Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.

• Verify that the correct materials and tools are issued and free from visible defects before starting work.

• Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.

• Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.

• Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.

• Use precision measuring instruments, such as dial indicators, to align and level the layup table as required.

• Retrieve and download CNC programs to the machine controller from the mainframe server.

• Set machine coordinates and adjust offsets, tool heights, and laser settings using the controller keyboard or pendant.

• Run the machine to lay graphite plies, copper ampe plies, and perform hand trimming and rework as necessary.

• Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.

• Move finished parts and tools using appropriate material handling equipment as required.

• Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.

• Perform quality checks after each operation to ensure parts meet specifications and are free from defects.

• Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ Years of experience using precision measuring tools.

• 1+ Years of experience with multi-axis Numerical Control (NC) machines.

• 1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.

• 1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.

• Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.

Preferred Qualifications:

• 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.

• Experience working with and around hazardous materials (while using the proper protective equipment).

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 22, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team. In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements. Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities

• Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.

• Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.

• Conduct continuity checks to ensure proper functionality of electrical systems.

• Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.

• Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling. Typically assigned work that has been previously sequenced.

• Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.

• Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.

• Perform hand forming of electrical wiring and soldering as required to complete work assignments.

• Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.

• Execute necessary riveting tasks as part of the assembly process.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in electrical assembly installation.

• 1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).

• 1+ years of experience handling chemicals and/or hazardous materials.

• Ability to recognize colors.

• Ability to work in confined spaces.

• Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:

• 1+ years of experience as an Electrician or Apprentice.

• Completion of an electrical trade school program or have military related electrical experience.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 09, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Decorative Interior Repairperson to join our Joint and Installation team in Renton or Everett, Washington. 

As a Decorative Interior Repairperson, you will be essential in ensuring that our aircraft interiors meet the highest standards of quality and safety. Your expertise will be vital in identifying and documenting any visible defects during thorough inspections, allowing you to execute precise repairs on interior trim and furnishings. By utilizing detailed specifications and prints, you will ensure that all materials used are appropriate and effective for the aircraft. Additionally, you will be required to pass an eye examination for color perception to ensure optimal performance in your role. Your meticulous approach will involve disassembling components, cleaning surfaces, and applying various finishes to achieve a flawless appearance. Collaboration with engineering and planning teams will be key as you address any challenges that arise, ensuring that all repairs conform to established procedures and specifications. 

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities:  

• Obtain work assignments from the team leader or review relevant paperwork to determine tasks. 

• Perform walk-through inspections of aircraft interiors to identify and document visible defects for repair. 

• Make repairs to interior trim and furnishings using materials such as plastics, vinyl, and metal, and remove stains or scratches. 

• Use prints, specifications, and documents necessary to accomplish work effectively. 

• Obtain and verify kitted repair supplies, ensuring color combinations are suitable for the aircraft.

• If supplies are not pre-picked, gather specified materials from storage areas as outlined in installation plans or non-conformance records. Disassemble defective interior trim parts using hand tools and clean surfaces prior to applying new materials. 

• Apply potting compounds, primers, adhesives, and special finishes as required by specifications and work orders. 

• Fit and assemble detail components to repaired parts according to specifications and drawings. 

• Paint or touch up repair areas using appropriate tools to achieve the desired finish, including mixing and matching paint as needed.

• Rework materials per engineering specifications and incorporate changes as needed, including leather repairs and touch-ups. 

• Remove marks and scratches from metal surfaces using appropriate tools and techniques. 

• Seal edges of repair areas with color-matched sealant as required.

• Consult with engineering, planning, and inspection on job-related issues and contact team leaders or supervisors when assistance is needed. 

• Document repairs identified by other mechanics and maintain personal certifications as required. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.  

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Basic Qualifications:  

• 1+ years of experience working with vinyl wallpaper, composites/non-metallic materials.

• Experience applying and evaluating decorative paint/ink for color match.

• Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all time.

Preferred Qualifications: 

• 1+ years of experience with aerospace or automotive spray painting.

• Experience working with detailed work instructions or reading and interpreting blueprints and drawings.

• Experience with touch-up painting.

• Enrollment in a Boeing partnered manufacturing related high school, community and technical college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $24.32 per hour with potential to earn up to $48.58 per hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 21, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Wire Assembler to join our Electrical Assembly team in Everett, Washington.

As a Wire Assembler, you will be a vital member of our team, dedicated to upholding the highest standards of safety and quality in our manufacturing processes. In this position, you will cut and trim electrical wire, construct wire bundles that connect electrical systems, and assemble shelves and panels. Your role will involve ensuring accurate and efficient assembly of components, while proactively identifying and addressing any discrepancies to maintain a seamless workflow. You will collaborate with various teams to facilitate the movement of parts. Additionally, you will prepare products for delivery, utilizing a range of tools and equipment to achieve precision in your work.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Identify discrepancies and promptly inform the appropriate work groups to ensure resolution.

• Make necessary adjustments to maintain proper machine operations and facilitate part movement within the organization.

• Coordinate, prepare, and package finished products for transportation to customers.

• Assist colleagues by answering questions and sharing information about work methods, processes, and procedures.

• Prepare kits of materials and components to support the manufacturing build process, revising drawings and incorporating changes as needed.

• Operate with or without wire forming boards, jigs, fixtures, or tooling to complete tasks. Utilize information systems to track parts and manage work priority and sequencing. Perform mechanical tasks such as sealing, soldering, encapsulation, and decal installation as required.

• Use electrical testing instruments, including ohmmeters and test lights, to conduct continuity checks and implement authorized changes.

• Drill, saw, file, sand, patch, and build up plastic parts and fixtures to meet required tolerances.

• Operate shop equipment, such as ovens, presses, and vacuum equipment, to finish and inspect parts.

• Create charts, records, and graphs as assigned, and apply protective materials and parting agents to molds, forms, and dies.

• Notify supervisors of equipment failures and malfunctions and make temporary molds and dams from various materials as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Handle and work with various metals (e.g., aluminum, brass, steel, titanium) and plastics (e.g., acrylic, fiberglass, kevlar) for 6-8 hours daily. Occasionally apply sealants, solvents, adhesives, cleaners, liquid coatings, and lubricants for 1-3 hours daily, ensuring proper use of materials such as epoxy, acetone, latex, and grease.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using tools and/or hand-held power tools.

• Experience in handling chemicals and hazardous materials (i.e., isopropyl alcohol and metals).

• Experience with electrical assembly installation.

• Ability to recognize colors.

• Proficiency in reading, writing, and speaking English.

• Ability to lift 35 pounds.

Preferred Qualifications:

• Experience as an Electrician or Apprentice.

• Completion of an electrical trade school program or have military related electrical experience.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

This position is for 2nd shift.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $23.32/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jun. 30, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 2nd shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Company Description

Stembay Learning Center provides extracurricular STEM education tailored for high school students, focusing on nurturing exceptional talents in STEM fields. Our mission is to help students discover unique opportunities to grow their skills and gain recognition. With both online programs and physical locations in the Bay Area and Seattle area, we aim to create a supportive and enriching learning environment. Our organization is dedicated to empowering the next generation of innovators and problem solvers.

Role Description

This is a part-time on-site/hybrid role for an AMC Math Tutor located in Chicago. The tutor will deliver engaging mathematics tutoring sessions (1 on 1 or small class) focused on preparing students for the American Mathematics Competitions (AMC) and other rigorous math challenges. Responsibilities include creating lesson plans, providing individualized and group instruction in topics such as algebra and advanced problem-solving, and offering guidance on effective test-taking strategies. The role also involves assessing student progress and collaborating with staff to enhance academic outcomes and STEM engagement.

Qualifications

• Proficiency in Mathematics with expertise in Algebra and problem-solving techniques
• Evidence of supporting AMC and Olympic Math competitions score improvement
• Experience in Tutoring and Online Tutoring, with the ability to effectively teach high school students
• Strong Communication skills to explain complex concepts in an accessible manner
• Passion for education and fostering a love for STEM in students
• Experience with AMC preparation or similar math competitions is a plus
• Bachelor’s degree in Mathematics, Education, or a related field preferred
• Patience, adaptability, and the ability to work collaboratively with students and staff

Job Position: Financial Analyst(HYBRID)

Location: Encino, CA

Shift: Day 5x8-Hour (8:00 AM - 5:00 PM).

Duration - 13 weeks.

Start Date: 03/30/2026

Pay Rate: $57/hour - $60/hour on W2.

EDUCATION/EXPERIENCE/TRAINING

Required:

* Bachelor's Degree

* 5+ years of experience (will consider 3 solid years)

* Experience in a hospital/medical group setting

* Expertise with Excel

* Experience with managed care analytics (payer mix, contract performance, etc)

* PMPM analysis and specialty cost reporting

Screening Questions:

1. Do you have 3+ year full-time experience in a medical office?

2. Do you have experience with managed care analytics (payer mix, contract performance, etc)?

3. Do you have experience with PMPM analysis and specialty cost reporting?

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Atlanta, GA (Remote)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22

PIe78ec5b432c9-37344-39277397

Want to make extra money on YOUR schedule? Join our exclusive list of research study participants and start earning extra income today!

Perfect for anyone seeking remote, part-time, or temporary work, these opportunities require no previous experience and offer unmatched flexibility. Choose the studies that suit you best—whether online, in-person, or over the phone—and get paid for sharing your opinions.

Don't miss out on this chance to turn your free time into valuable earnings!

Participants are needed on a wide range of topics such as:

• Health Issues (Research for cures and new medications to treat ailments)
• Consumer Products (Your experience with consumer products)
• Shopping (Shopping experiences)
• Internet Usage (How you use the internet)
• Vehicles (recreational vehicles and automobiles)
• Employment (Various types of jobs or career fields)
• Food & Beverages (the consumption of various foods and beverages)
• Entertainment (About TV, movies or video games)
• Social Media (the use of different social media platforms)
• Financial (Banking and investing)
• Retirement (Planning what, when and how)
• Gender (studies based on your gender)
• Housing (Renters or Homeowners)

Compensation:

• Earn up to $250+ in Just ONE Hour! (Focus Group Session)
• Earn up to $3,000+ (Multi-Session Studies)

Benefits:

• Flexibility to take part in discussions online or in-person.
• No commute needed if you choose to work from home.
• No minimum hours. You can do this part-time or full-time
• Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products.
• You get to review and use new products or services before they are launched to the public.

Qualifications:

• Speak and/or read English
• Must be 18yrs old or older
• Must have either a phone, computer or tablet with internet connection

Experience:

• Start Immediately - No Experience Needed! Anyone Can Participate!

Education:

• Open to all education levels - Your opinion matters!

Come care with us at West Coast University! As a Physician Assistant Faculty member for a certified Great Place to Work, you will guide students to do more than change their own lives – you will help change the lives of every patient they treat throughout their career in healthcare.  At West Coast University you will have the opportunity to share your success story with the next generation of Physician Assistant as a key member of our student-centered, innovative community!

You will make an impact by:

• Provides professional leadership and support, and serves as an educator, role model, mentor and facilitator.
• Create an educational environment which fosters innovation, responsiveness, and accountability
• Regularly contributes to improvement or upgrading of class materials and syllabi utilizing identified University processes
• Utilizes a variety of teaching methodologies to instruct students, always with intent to facilitate observable evidence of student fulfillment of prescribed learning outcomes.
• Demonstrates enthusiasm for teaching and the teaching/learning process and for individual students.
• Assists with assessment, critique and evaluation of overall curriculum and may lead the process of revisions to program and syllabi (if necessary) while ensuring quality.

Your Experience Includes:

• 0-4 years of teaching in a University (or College) setting or previous rank of assistant professor awarded by a regionally accredited institution.
• Teaching experience in Physician Assistant courses and initiated research interest focused on evidence-based clinical research is strongly preferred.
• Working with online learning management systems to further engage the student learning process desirable.
• Documented 3 years of experience as a practicing clinician

 Education:

• Must provide a documented background in educational methodology consistent with teaching assignments including but not limited to education theory and practice, or current concepts relative to specific subjects he or she will be teaching, or current clinical practice experience, or distance education techniques and delivery.
• Terminal academic degree required (Master’s degree), doctorate preferred

 LICENSES/CERTIFICATIONS:

• NCCPA certified Physician Assistant or Board certified (or eligible) allopathic or osteopathic physician
• PA license (or eligible) or MD / DO licensed or eligible for licensure

Do you want a career that allows you to make a difference in other people’s lives? Discover what it means to truly believe in the work that you do at West Coast University.

At West Coast University, we have the privilege of educating students seeking careers in healthcare and guide them through their transformational journey from student to caregiver. Our associates are united behind that purpose and share a deep commitment to our values of teamwork, collegiality, transparency, and a student-centric approach to all we do. This focus creates an aligned, nimble, and consensus-driven culture that is solution-oriented and supports our associates’ professional growth.

West Coast University is proud to be an equal opportunity employer. We embrace diversity and are dedicated to creating an inclusive environment for all associates.