Dsm Axis Examples Jobs in Usa
982 positions found — Page 4
CNC Mill and Lathe Operator (GRAND JUNCTION)
Salary not disclosed
JOB SUMMARY
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.
SHIFTS AVAILABLE
1st: 7:00 AM - 3:30 PM
2nd: 3:00 PM - 1:30 AM
ESSENTIAL DUTIES & RESPONSIBILITIES
- Safely perform all tasks.
- Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components
- Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.
- Operate a variety of CNC Mills or Lathes and other hand and power machines.
- Assemble cutting tools.
- Maintain 6S requirements in work area.
JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS
- Blueprint reading including Geometric Dimensioning & tolerancing
- Understand G and M codes/Mazatrol
- Capable of performing some heavy labor, ability to lift 50-75 lbs.
- Good communication skills (verbal and written)
- Good working knowledge of hand measuring and inspection tools
EDUCATION & EXPERIENCE REQUIREMENTS
- High School/GED or higher education, preferred
- 2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus
- Mazak Mill, Integrex, or other multi-axis machining experience, preferred.
- Or an equivalent combination of education, training or experience.
This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.
SHIFTS AVAILABLE
1st: 7:00 AM - 3:30 PM
2nd: 3:00 PM - 1:30 AM
ESSENTIAL DUTIES & RESPONSIBILITIES
- Safely perform all tasks.
- Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components
- Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.
- Operate a variety of CNC Mills or Lathes and other hand and power machines.
- Assemble cutting tools.
- Maintain 6S requirements in work area.
JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS
- Blueprint reading including Geometric Dimensioning & tolerancing
- Understand G and M codes/Mazatrol
- Capable of performing some heavy labor, ability to lift 50-75 lbs.
- Good communication skills (verbal and written)
- Good working knowledge of hand measuring and inspection tools
EDUCATION & EXPERIENCE REQUIREMENTS
- High School/GED or higher education, preferred
- 2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus
- Mazak Mill, Integrex, or other multi-axis machining experience, preferred.
- Or an equivalent combination of education, training or experience.
This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
temporary
CNC Machinist/Lathe Hand
🏢 JABIL CIRCUIT, INC
$41,100 - 74,000
JOB SUMMARY
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.
SHIFTS AVAILABLE
1st: 7:00 AM - 3:30 PM
2nd: 3:00 PM - 1:30 AM
ESSENTIAL DUTIES & RESPONSIBILITIES
Safely perform all tasks.
Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components
Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.
Operate a variety of CNC Mills or Lathes and other hand and power machines.
Assemble cutting tools.
Maintain 6S requirements in work area.
JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS
Blueprint reading including Geometric Dimensioning & tolerancing
Understand G and M codes/Mazatrol
Capable of performing some heavy labor, ability to lift 50-75 lbs.
Good communication skills (verbal and written)
Good working knowledge of hand measuring and inspection tools
EDUCATION & EXPERIENCE REQUIREMENTS
~ High School/GED or higher education, preferred
~2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus
~ Mazak Mill, Integrex, or other multi-axis machining experience, preferred.
~ Or an equivalent combination of education, training or experience.
This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.
SHIFTS AVAILABLE
1st: 7:00 AM - 3:30 PM
2nd: 3:00 PM - 1:30 AM
ESSENTIAL DUTIES & RESPONSIBILITIES
Safely perform all tasks.
Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components
Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.
Operate a variety of CNC Mills or Lathes and other hand and power machines.
Assemble cutting tools.
Maintain 6S requirements in work area.
JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS
Blueprint reading including Geometric Dimensioning & tolerancing
Understand G and M codes/Mazatrol
Capable of performing some heavy labor, ability to lift 50-75 lbs.
Good communication skills (verbal and written)
Good working knowledge of hand measuring and inspection tools
EDUCATION & EXPERIENCE REQUIREMENTS
~ High School/GED or higher education, preferred
~2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus
~ Mazak Mill, Integrex, or other multi-axis machining experience, preferred.
~ Or an equivalent combination of education, training or experience.
This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
temporary
CNC Machinists Needed
🏢 JABIL CIRCUIT, INC
$41,100 - 74,000
JOB SUMMARY
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.
SHIFTS AVAILABLE
1st: 7:00 AM - 3:30 PM
2nd: 3:00 PM - 1:30 AM
ESSENTIAL DUTIES & RESPONSIBILITIES
Safely perform all tasks.
Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components
Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.
Operate a variety of CNC Mills or Lathes and other hand and power machines.
Assemble cutting tools.
Maintain 6S requirements in work area.
JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS
Blueprint reading including Geometric Dimensioning & tolerancing
Understand G and M codes/Mazatrol
Capable of performing some heavy labor, ability to lift 50-75 lbs.
Good communication skills (verbal and written)
Good working knowledge of hand measuring and inspection tools
EDUCATION & EXPERIENCE REQUIREMENTS
~ High School/GED or higher education, preferred
~2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus
~ Mazak Mill, Integrex, or other multi-axis machining experience, preferred.
~ Or an equivalent combination of education, training or experience.
This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.
SHIFTS AVAILABLE
1st: 7:00 AM - 3:30 PM
2nd: 3:00 PM - 1:30 AM
ESSENTIAL DUTIES & RESPONSIBILITIES
Safely perform all tasks.
Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components
Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.
Operate a variety of CNC Mills or Lathes and other hand and power machines.
Assemble cutting tools.
Maintain 6S requirements in work area.
JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS
Blueprint reading including Geometric Dimensioning & tolerancing
Understand G and M codes/Mazatrol
Capable of performing some heavy labor, ability to lift 50-75 lbs.
Good communication skills (verbal and written)
Good working knowledge of hand measuring and inspection tools
EDUCATION & EXPERIENCE REQUIREMENTS
~ High School/GED or higher education, preferred
~2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus
~ Mazak Mill, Integrex, or other multi-axis machining experience, preferred.
~ Or an equivalent combination of education, training or experience.
This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
temporary
CNC Programmers
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.
SHIFTS AVAILABLE
1st: 7:00 AM - 3:30 PM
2nd: 3:00 PM - 1:30 AM
ESSENTIAL DUTIES & RESPONSIBILITIES
Safely perform all tasks.
Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components
Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.
Operate a variety of CNC Mills or Lathes and other hand and power machines.
Assemble cutting tools.
Maintain 6S requirements in work area.
JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS
Blueprint reading including Geometric Dimensioning & tolerancing
Understand G and M codes/Mazatrol
Capable of performing some heavy labor, ability to lift 50-75 lbs.
Good communication skills (verbal and written)
Good working knowledge of hand measuring and inspection tools
EDUCATION & EXPERIENCE REQUIREMENTS
~ High School/GED or higher education, preferred
~2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus
~ Mazak Mill, Integrex, or other multi-axis machining experience, preferred.
~ Or an equivalent combination of education, training or experience.
This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Jabil is seeking experienced CNC Machinists to set up and operate 3, 4, and 5 axis CNC mills or CNC lathes with live tooling and without.
SHIFTS AVAILABLE
1st: 7:00 AM - 3:30 PM
2nd: 3:00 PM - 1:30 AM
ESSENTIAL DUTIES & RESPONSIBILITIES
Safely perform all tasks.
Work from blueprints, engineering drawings, set up instructions, job instruction sheets (JIS), and verbal instructions to fabricate a variety of machined components
Inspect parts using precision measuring tools such as micrometers, dial indicators, calipers, bore gages, diameter & groove gages, and height gages.
Operate a variety of CNC Mills or Lathes and other hand and power machines.
Assemble cutting tools.
Maintain 6S requirements in work area.
JOB QUALIFICATIONS & KNOWLEDGE REQUIREMENTS
Blueprint reading including Geometric Dimensioning & tolerancing
Understand G and M codes/Mazatrol
Capable of performing some heavy labor, ability to lift 50-75 lbs.
Good communication skills (verbal and written)
Good working knowledge of hand measuring and inspection tools
EDUCATION & EXPERIENCE REQUIREMENTS
~ High School/GED or higher education, preferred
~2+ years' experience as a machinist; familiarity with CNC, Lathe and manual machines a plus
~ Mazak Mill, Integrex, or other multi-axis machining experience, preferred.
~ Or an equivalent combination of education, training or experience.
This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
permanent
P
CNC Machinist - Turning 1st/2nd shift
Salary not disclosed
Title
CNC Machinist - Turning 1st/2nd shift
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Position Requirements
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Operations
Req Number
OPE-25-00003
Position
CNC Machinist - Turning
Close Date
Post Internal Days
0
Number of Openings
2
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Lisa Czaja
CNC Machinist - Turning 1st/2nd shift
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
This position builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis turning machines to produce precision aerospace components.
Responsibilities:
- Perform set up and operate vertical and horizontal multi-axis turning machinery as required with supervision.
- Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers, etc.
- Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
- Read/interpret operation sheets and work instructions.
- Adhere to established policies and company procedures and standard work.
- Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
- Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
- Maintain work areas and equipment in a clean and orderly condition.
- Follow all safety policies, rules and regulations.
- Other duties as assigned by Leads, Supervisors and/or Managers.
Physical Requirements:
- Ability to stand or sit for extended period of time on a concrete manufacturing floor.
- Fine motor skills with frequent hand and arm movement.
- Ability to lift up to 50 pounds.
- Moderate twisting and bending.
- Moderate climbing on step stools or platforms.
- Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
- Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
Qualifications:
- US Citizen
- High School Diploma or equivalent.
- Technical school graduate in machining or two years of CNC experience.
- Aerospace experience preferred.
- Basic understanding of math or industrial mathematics.
- Good written and verbal skills.
- Basic computer skills.
- Ability to read technical drawings.
- Ability to set, use or setup various measuring devices.
- Solid problem solving skills.
Position Requirements
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Operations
Req Number
OPE-25-00003
Position
CNC Machinist - Turning
Close Date
Post Internal Days
0
Number of Openings
2
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Lisa Czaja
This position is currently accepting applications.
Apply Now
Not Specified
P
CNC Machinist III (1st Shift)
🏢 Prototek
Salary not disclosed
JOB TITLE: CNC Machinist III
PAY RANGE: $34.00 - $40.00 | SHIFT: 1st
SEE WHAT WE DO: kvuAbB4969E?si=MCg_01gD0C0BCG6-
QUICK SUMMARY:
The CNC Machinist III is a senior-level machinist responsible for executing complex machining and programming work with minimal supervision. This role serves as a technical resource and mentor within the CNC department, supporting advanced jobs, process improvements, and continuous development of machining capabilities.
KEY RESPONSIBILITIES:
REQUIREMENTS:
WHAT PROTOTEK OFFERS:
WORK AUTHORIZATION WORDING
Must meet ITAR U.S. Person requirements - Prototek maintains International Traffic in Arms Regulations (ITAR) compliant operations in United States based facilities. This position is subject to ITAR which requires U.S. Person status. ITAR defines U.S. Person as U.S. Citizens, lawful permanent residents, or foreign nationals granted refugee or asylee status.
PAY RANGE: $34.00 - $40.00 | SHIFT: 1st
SEE WHAT WE DO: kvuAbB4969E?si=MCg_01gD0C0BCG6-
QUICK SUMMARY:
The CNC Machinist III is a senior-level machinist responsible for executing complex machining and programming work with minimal supervision. This role serves as a technical resource and mentor within the CNC department, supporting advanced jobs, process improvements, and continuous development of machining capabilities.
KEY RESPONSIBILITIES:
- Program, set up, and run complex CNC jobs
- Design fixtures and optimize machining strategies
- Apply lathe and basic 5-axis machining concepts
- Mentor junior machinists and share best practices
- Support quoting and continuous improvement efforts
REQUIREMENTS:
- High School Diploma required; Machining Degree preferred
- 5 - 7years advanced CNC machining experience
- 5-Axis Machining Experience stronglypreferred
- Strong GD&T, print reading, and material knowledge
- Experience with Fusion 360 or comparable CAM software
WHAT PROTOTEK OFFERS:
- Health, dental, vision, life and short-term disability insurance
- Company paid life and long-term disability insurance
- 9 paid Holidays annually
- Employee Assistance Program (EAP)
- 401(k) match: 100% of 3% and 50% for 4% and 5%
- Education reimbursement program
- Career advancement opportunities
- Flexible Schedule
- Competitive pay scale
- Paid time off (PTO) starting at 80 hours with annual increase for each year of service
WORK AUTHORIZATION WORDING
Must meet ITAR U.S. Person requirements - Prototek maintains International Traffic in Arms Regulations (ITAR) compliant operations in United States based facilities. This position is subject to ITAR which requires U.S. Person status. ITAR defines U.S. Person as U.S. Citizens, lawful permanent residents, or foreign nationals granted refugee or asylee status.
We are an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, national origin, sexual orientation, gender, gender identity, veteran status, disability, or any other protected class.
EEO is The Law - click here for more information:
We endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact or email us: . You may also write to us and we will be happy to assist you with the application: Prototek, 205 Pine St., Hopkinton, NH 03229
Not Specified
P
NC Programmer
🏢 PCX Aerostructures, LLC
Salary not disclosed
Title
NC Programmer
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Position Requirements
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Engineering
Req Number
ENG-25-00019
Position
NC Programmer
Close Date
Post Internal Days
0
Number of Openings
3
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
NC Programmer
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Accountability:
Develop, implement, and troubleshoot CNC program designs. Provide technical expertise in collaboration with functions across the organization to achieve project goals. Work closely with production to solve problems. Use strong analytical design and project management skills along with product expertise to meet customer requirements.
Essential Functions and Duties:
- Prepare computer programs to control CNC machine operations using CAD/CAM terminal (Siemens NX and MasterCam).
- Prepare flow charts, documents and sequence logic and write complete sequence of machine operations necessary to complete cycle.
- Analyze engineering drawings for materials, process fabrication and design elements.
- Specify patterns on programming sheet for way part is to be machined.
- Assure program meets target cycle time and program generates geometry to customer requirements.
- Select appropriate cutting tools, speeds and feeds, tool path application necessary to perform the operation.
- Assist in the concept design of required tools and gages, support changes to existing tools and fixture as improvements are identified.
- Support lean activities both within the Engineering group and across the organization.
Complexity of Tasks:
Requires strong verbal and written communication skills along with advanced interpersonal skills. Strong project management skills are essential. Must be able to collaborate with other departments and functions in achieving project goals. Use available resources to support customer needs and expectations on both a national and international level.
Qualifications:
- Bachelor's Degree in an engineering discipline preferred and/or equivalent experience.
- Ten or more years direct experience in multi-axis programming of Aerospace machining operations and materials.
- Ability to program in appropriate programming language using either a CAD/CAM terminal and/or manually generated.
- 3D modeling sketcher, assemblies, lathe, and drafting capability in Siemens PLM (NX 8.5) or later version
- CAD/CAM software: Siemens NX and MasterCam required
- Full multi-axis (5+) or partial (3+1) and general CNC machining/programming experience with lathes, milling machines, and mill/turns. Grinding experience preferred.
- CG Tech Vericut experience required.
- Capable of debugging programs and working closely with shop floor and inspection personnel.
- Some tool design experience preferred.
- Proper application and knowledge of various cutting tools and holders to efficiently complete program operations.
- Must be a team player and have the ability to work closely in a shop environment.
- Seek ideas for continuous improvement; suggest and encourages innovative ideas to improve current systems and processes.
- Working knowledge of Microsoft office application software to include Word, Excel and PowerPoint required
Position Requirements
Shift
Days
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Engineering
Req Number
ENG-25-00019
Position
NC Programmer
Close Date
Post Internal Days
0
Number of Openings
3
Exempt/Non-Exempt
Exempt
Hiring Manager(s)
This position is currently accepting applications.
Apply Now
Not Specified
P
CNC Machinist Level III (2nd Shift)
🏢 Prototek
Salary not disclosed
JOB TITLE: CNC Machinist III
PAY RANGE: $40 - $50 + 10% Shift Differential | SHIFT: 2nd Shift | 5 - 8-hour shifts | Overtime available
SEE WHAT WE DO: kvuAbB4969E?si=MCg_01gD0C0BCG6-
QUICK SUMMARY:
The CNC Machinist III is a senior-level machinist responsible for executing complex machining and programming work with minimal supervision. This role serves as a technical resource and mentor within the CNC department, supporting advanced jobs, process improvements, and continuous development of machining capabilities.
KEY RESPONSIBILITIES:
REQUIREMENTS:
WHAT PROTOTEK OFFERS:
WORK AUTHORIZATION WORDING
Must meet ITAR U.S. Person requirements - Prototek maintains International Traffic in Arms Regulations (ITAR) compliant operations in United States based facilities. This position is subject to ITAR which requires U.S. Person status. ITAR defines U.S. Person as U.S. Citizens, lawful permanent residents, or foreign nationals granted refugee or asylee status.
PAY RANGE: $40 - $50 + 10% Shift Differential | SHIFT: 2nd Shift | 5 - 8-hour shifts | Overtime available
SEE WHAT WE DO: kvuAbB4969E?si=MCg_01gD0C0BCG6-
QUICK SUMMARY:
The CNC Machinist III is a senior-level machinist responsible for executing complex machining and programming work with minimal supervision. This role serves as a technical resource and mentor within the CNC department, supporting advanced jobs, process improvements, and continuous development of machining capabilities.
KEY RESPONSIBILITIES:
- Program, set up, and run complex CNC jobs
- Design fixtures and optimize machining strategies
- Apply lathe and basic 5-axis machining concepts
- Mentor junior machinists and share best practices
- Support quoting and continuous improvement efforts
REQUIREMENTS:
- High School Diploma required; Machining Degree preferred
- 5 - 7+ years advanced CNC machining experience
- 5-Axis Machining Experiencestronglypreferred
- Strong GD&T, print reading, and material knowledge
- Experience with Fusion 360 or comparable CAM software
WHAT PROTOTEK OFFERS:
- Health, dental, vision, life and short-term disability insurance
- Company paid life and long-term disability insurance
- 9 paid Holidays annually
- Employee Assistance Program (EAP)
- 401(k) match: 100% of 3% and 50% for 4% and 5%
- Education reimbursement program
- Career advancement opportunities
- Flexible Schedule
- Competitive pay scale
- Paid time off (PTO) starting at 80 hours with annual increase for each year of service
WORK AUTHORIZATION WORDING
Must meet ITAR U.S. Person requirements - Prototek maintains International Traffic in Arms Regulations (ITAR) compliant operations in United States based facilities. This position is subject to ITAR which requires U.S. Person status. ITAR defines U.S. Person as U.S. Citizens, lawful permanent residents, or foreign nationals granted refugee or asylee status.
We are an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, national origin, sexual orientation, gender, gender identity, veteran status, disability, or any other protected class.
EEO is The Law - click here for more information:
We endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact or email us: . You may also write to us and we will be happy to assist you with the application: Prototek, 205 Pine St., Hopkinton, NH 03229
Not Specified
P
CNC Milling Machinist, 1st/2nd Shifts
✦ New 🏢 PCX Aerostructures, LLC
Salary not disclosed
Title
CNC Milling Machinist, 1st/2nd Shifts
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
Position Requirements
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Manufacturing
Req Number
MAN-25-00001
Position
CNC Milling Machinist, 2nd Shift
Close Date
Post Internal Days
0
Number of Openings
3
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Lisa Czaja
CNC Milling Machinist, 1st/2nd Shifts
About the Organization
Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms.
EOE Statement
Applied Aerospace and Defense is an equal opportunity employer.
Description
The CNC Milling Machine Operator builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis milling machines to produce precision aerospace components.
Responsibilities:
- Operate vertical and horizontal multi-axis milling machinery as required with supervision.
- Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers
- Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
- Read/interpret operation sheets and work instructions.
- Adhere to established policies and company procedures and standard work.
- Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
- Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
- Maintain work areas and equipment in a clean and orderly condition.
- Follow all safety policies, rules and regulations.
- Other duties as assigned by Leads, Supervisors and/or Managers.
Physical Requirements:
- Ability to stand or sit for extended period of time on a concrete manufacturing floor.
- Fine motor skills with frequent hand and arm movement.
- Ability to lift up to 50 pounds.
- Moderate twisting and bending.
- Moderate climbing on step stools or platforms.
Unusual Environmental Conditions:
- Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
Required Personal Protective Equipment:
- Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
Qualifications:
- US Citizen
- High School Diploma or equivalent.
- Technical school graduate in machining (desired)
- Minimum of 5 Years of Machining Experience.
- Strong machine setup skills.
- Aerospace experience required.
- Ability to work with tight tolerances.
- Strong industrial math skills, required.
- Strong written and verbal skills.
- Ability to read technical drawings.
- Ability to use and setup various measuring devices.
- Strong problem-solving skills.
- Lean basic knowledge i.e. 5S, setup reduction, TPM.
- Ability to read & interpret machining program language.
Position Requirements
Shift
Various Shifts
Full-Time/Part-Time
Full-Time
Location
Applied Aerospace & Defense, Manchester
Category
Manufacturing
Req Number
MAN-25-00001
Position
CNC Milling Machinist, 2nd Shift
Close Date
Post Internal Days
0
Number of Openings
3
Exempt/Non-Exempt
Non-Exempt
Hiring Manager(s)
Lisa Czaja
This position is currently accepting applications.
Apply Now
Not Specified
F
FEC Machinist
✦ New
Salary not disclosed
Mission-Driven. Honor-Bound. Fairbanks Morse Defense. What's your calling? For the men and women of Fairbanks Morse Defense it's the rapid and effective support of the fleets that entrust us to design, develop, and deliver the best naval power technology on the planet. We're one of the nation's leading marine defense contractors because of the highly trained and dedicated teams that provide reliable power systems, parts, and aftermarket services to the U.S. Navy, Coast Guard, Military Sealift Command, and Canadian Coast Guard. When you join Fairbanks Morse Defense, you join a legacy of commitment that spans 150 years. Fairbanks Morse Defense offers competitive benefits with a wide range of training and development opportunities. Our world-class teams are dedicated to helping every individual achieve their full potential. Discover what it's like to be a part of the Fairbanks Morse Defense team here: Summary:
The company, now part of Fairbanks Morse Defense, is rapidly growing and in need of a Machinist.
The successful candidate will be responsible for setting up and operating CNC mills and/or lathe, while also understanding machining centers, lathes, and other equipment to produce parts to tight tolerances within .001. Experience programming at machine is a big plus. FEC offers a unique working environment that allows a hands-on individual to develop and grow as the company expands its footprint and maintains high performance as a trusted defense contractor.
Key Responsibilities:
Qualifications:
Note: This position requires access or potential access to Unclassified Naval Nuclear Propulsion Information, which is Not Releasable to Foreign Nationals (NOFORN) data. Therefore, to meet NOFORN requirement, you will have to provide proof of US Citizenship and attest that you do not have dual citizenship. Acceptable proof of US Citizenship is a US Passport, US Birth Certificate or Naturalization Certificate.
This specification is intended to indicate the kinds of tasks and levels of work difficulty that will be required of positions that will be given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of any supervisor to assign, direct, and control the work of employees under his/her supervision. Ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrated commitment to effective customer service delivery, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Fairbanks Morse Defense.
Fairbanks Morse Defense offers a competitive benefits package including but not limited to, medical, dental, vision, life, and disability insurances, and 401k retirement plan with employer match. In addition, we offer paid time off, paid holidays, paid parental leave, and tuition reimbursement.
Equal Opportunity Employer/Veterans/Disabled
The company, now part of Fairbanks Morse Defense, is rapidly growing and in need of a Machinist.
The successful candidate will be responsible for setting up and operating CNC mills and/or lathe, while also understanding machining centers, lathes, and other equipment to produce parts to tight tolerances within .001. Experience programming at machine is a big plus. FEC offers a unique working environment that allows a hands-on individual to develop and grow as the company expands its footprint and maintains high performance as a trusted defense contractor.
Key Responsibilities:
- Operate 3 or 4 axis machining centers to perform precision machining operations
- Participate in continuous improvement activities.
- Analyze data and production reports
- Review samples, drawings or instructions to understand specifications of output
- Plan the sequence of necessary actions for the completion of a job
- Take measurements and mark material for cutting or shaping
- Select appropriate machines (e.g. lathes) and position or load material for a job
- Determine and program size of batches, speed of machine etc.
- Monitor machine while working to adjust the feed, maintain temperature and identify issues
- Check output to ensure consistency with specifications and discard defects
- Keep records of approved and defective units or final products
- Set-up and operate manual and CNC machines to manufacture parts to meet engineering blueprints.
- Work closely with CNC programmer to ensure that programs manufacture parts that meet drawing specifications.
- Support maintenance of tooling, identifying tooling needs and sharpening tooling as necessary
- Operation of one or more CNC machines under the direction of supervisors
- Minor maintenance on machines
- Load programs and perform simple edits as needed
- Adhere to company Malpractice & Ethics Policies
Qualifications:
- High School Diploma (Preferred) or GED
- Reliable transportation to and from work
- Manual and/or CNC Machining Experience
- 3 axis CNC Millsa plus
- G&M Code editing a plus
- Must be able to use indicators and setting starting coordinates
- Use of basic measuring tools
- Understand X,Y,Z coordinates
- Ability to set up machine and operate it independently (change cutters) adjust speeds, feeds and edits
- Troubleshooting skills a plus.
- Must be able to lift 30 lbs.
- Minimum of 3 years of machining experience. Experience on CNC Mills, Manual Lathes and Mills is preferred.
- Ability to interpret shop drawings, layouts and sample parts to determine dimensions and tolerances of finished work pieces, sequence of operation, and set-up requirements
- Experience using calipers, micrometers, gauges and other precision measuring instruments is required
- Strong attention to detail
- Ability to troubleshoot
- Fanuc experience is preferable
- Good coordination, motor skills, and dexterity
- Maintain a clean and safe work environment.
- Ensures that all safety procedures are followed as stated on posted signs and in Company policy
- Creative thinking and idea generation
- Significant manufacturing experience
- Ability to communicate information clearly
- Ability to collaborate with others and work independently
Note: This position requires access or potential access to Unclassified Naval Nuclear Propulsion Information, which is Not Releasable to Foreign Nationals (NOFORN) data. Therefore, to meet NOFORN requirement, you will have to provide proof of US Citizenship and attest that you do not have dual citizenship. Acceptable proof of US Citizenship is a US Passport, US Birth Certificate or Naturalization Certificate.
This specification is intended to indicate the kinds of tasks and levels of work difficulty that will be required of positions that will be given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of any supervisor to assign, direct, and control the work of employees under his/her supervision. Ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrated commitment to effective customer service delivery, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Fairbanks Morse Defense.
Fairbanks Morse Defense offers a competitive benefits package including but not limited to, medical, dental, vision, life, and disability insurances, and 401k retirement plan with employer match. In addition, we offer paid time off, paid holidays, paid parental leave, and tuition reimbursement.
Equal Opportunity Employer/Veterans/Disabled
Not Specified
jobs by
✓ All jobs loaded