Dominguez General Engineering Inc Jobs in Usa

Job Summary

• Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
• Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
• Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
• Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
• Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
• Document all maintenance activities, repairs, and process changes accurately and thoroughly.
• Participate in root cause analysis for production defects and implement effective solutions.
• Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
• Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
• Flexibility to work night shifts, including weekends and holidays as required.

Job Qualifications

• Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
• Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
• Strong understanding of SMT processes, equipment operation, and common defects.
• Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
• Ability to read and interpret schematics, technical drawings, and equipment manuals.
• Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
• Familiarity with IPC standards and quality control principles.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
• Proficient in using standard hand tools, diagnostic equipment, and computers.
• Ability to lift up to 35 lbs and stand for extended periods.

Job Summary

• Perform set-up, operation, and troubleshooting of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
• Monitor SMT production processes to identify and resolve issues related to component placement, solder paste application, and reflow profiles.
• Conduct preventative maintenance and calibration on SMT machinery to ensure optimal performance and minimize downtime.
• Assist engineers in the development and implementation of new SMT processes, equipment, and materials.
• Interpret and analyze SMT process data to identify trends, root causes of defects, and areas for improvement.
• Provide technical support to production operators, offering guidance on best practices and troubleshooting techniques.
• Participate in continuous improvement initiatives, including lean manufacturing and Six Sigma methodologies, to enhance SMT line efficiency and product quality.
• Maintain accurate records of equipment maintenance, process parameters, and production issues.
• Adhere to all safety protocols and quality standards within the SMT department.

Job Qualifications

• Associate's degree in Electrical Engineering Technology, Electronics, or a related field; or equivalent practical experience.
• Minimum of 2-4 years of experience working with SMT production lines and equipment.
• Strong understanding of SMT processes, including solder paste deposition, component placement, reflow soldering, and AOI.
• Proficiency in operating and troubleshooting various SMT equipment (e.g., Fuji, MyData, Universal, MPM, DEK, Koh Young, Mirtec).
• Ability to read and interpret technical drawings, schematics, and process specifications.
• Excellent problem-solving skills and a methodical approach to troubleshooting.
• Strong communication and interpersonal skills to effectively collaborate with engineers and production teams.
• Ability to work independently and as part of a team in a fast-paced manufacturing environment.
• Familiarity with IPC standards (e.g., IPC-A-610) is a plus.

Job Summary

• Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
• Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
• Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
• Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
• Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
• Document all maintenance activities, repairs, and process changes accurately and thoroughly.
• Participate in root cause analysis for production defects and implement effective solutions.
• Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
• Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
• Flexibility to work night shifts, including weekends and holidays as required.

Job Qualifications

• Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
• Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
• Strong understanding of SMT processes, equipment operation, and common defects.
• Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
• Ability to read and interpret schematics, technical drawings, and equipment manuals.
• Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
• Familiarity with IPC standards and quality control principles.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
• Proficient in using standard hand tools, diagnostic equipment, and computers.
• Ability to lift up to 35 lbs and stand for extended periods.

JOB SUMMARY

ESSENTIAL DUTIES AND RESPONSIBILITIES

·         Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
·         Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
·         Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
·         The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
·         Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
·         Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
·         In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
·         Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
·         May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

·         Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
·         Ability to define problems, collect data, establish facts, and draw valid conclusions.
·         Ability to operate a personal computer including using a Windows based operating system and related software.
·         Advanced PC skills, including training and knowledge of Jabil’s software packages.
·         Ability to write simple correspondence. Read and understand visual aid.
·         Ability to apply common sense understanding to carry out simple one- or two-step instructions.
·         Ability to deal with standardized situations with only occasional or no variables.
·         Ability to read and comprehend simple instructions, short correspondence, and memos.
·         Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
·         Ability to compute rate, ratio, and percent and to draw and interpret graphs.

Third Shift

Monday - Friday 11:00 p.m. - 7:00 .

JOB SUMMARYESSENTIAL DUTIES AND RESPONSIBILITIES· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.· Works closely with manufacturing and test support to ensure prioritization of support activities.

He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.· Ability to define problems, collect data, establish facts, and draw valid conclusions.· Ability to operate a personal computer including using a Windows based operating system and related software.· Advanced PC skills, including training and knowledge of Jabil's software packages.· Ability to write simple correspondence.

Read and understand visual aid.· Ability to apply common sense understanding to carry out simple one- or two-step instructions.· Ability to deal with standardized situations with only occasional or no variables.· Ability to read and comprehend simple instructions, short correspondence, and memos.· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.· Ability to compute rate, ratio, and percent and to draw and interpret graphs.

JOB SUMMARYESSENTIAL DUTIES AND RESPONSIBILITIES· Provides input for colleague's performance appraisals· Assists Test Engineers when commissioning new test equipment.· Provides technical assistance to other technicians on the same shift.· Provides line support to manufacturing for all test processes.· Ensures "machine down" calls are responded to in a timely manner.· Liaises with manufacturing to determine repair priorities.· Ensures adequate spares are available for all allocated equipment.· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.· Escalates to Test Engineers any unresolved/ongoing issues.· Instructs operators on safe/effective use of test equipment.· Provides daily report of all line issues.· Provides weekly/quarterly downtime reports for allocated equipment.· Sources spares from the most cost effective supplier.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.· Ability to define problems, collect data, establish facts, and draw valid conclusions.· Ability to operate a personal computer including using a Windows based operating system and related software.· Advanced PC skills, including training and knowledge of Jabil's software packages.· Ability to write simple correspondence.

Read and understand visual aid.· Ability to apply common sense understanding to carry out simple one- or two-step instructions.· Ability to deal with standardized situations with only occasional or no variables.· Ability to read and comprehend simple instructions, short correspondence, and memos.· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.· Ability to compute rate, ratio, and percent and to draw and interpret graphs.

Second Shift: Monday
- Friday 3:00 p.m.

- 11:30 p.m.

JOB SUMMARY

Third Shift

Monday - Friday 11:00 p.m. - 7:00 .

JOB SUMMARY

Third Shift

Monday - Friday 11:00 p.m. - 7:00 .

JOB SUMMARY

JOB SUMMARY

Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.

Immediate need for a talented Project Engineer I (Engineering). This is a 12+ Months contract opportunity with long-term potential and is located in Chattanooga, TN (Onsite). Please review the job description below and contact me ASAP if you are interested.

Job ID: 26-05465

Pay Range: $25 - $35/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location).

Key Responsibilities:

• Perform all aspects of project engineering including design, procurement, construction management, installation, and qualification.
• Plan, establish budgets, develop complex schedules and coordinate resources to ensure delivery of scope, schedule, budget, and cash flow for all projects.
• Drive results in Engineering metrics and own the following (KPIs): Budget Adherence %, Cash Flow Adherence %, Vertical Startup Adherence %, Critical Success Factor Adherence %, Projects Submitted, Projects Approved, CAPEX $ Spent vs Annual Budget.
• Site liaison and team participant for projects that are being executed by non site-based engineering resources.
• Champion Early Equipment Management (EEM) program including optimization, maintenance, retirement, and Startup Management (SUM).
• Develops cost estimates and conceptual designs for new products, line extensions, and packaging operations.
• Develop standards for equipment, systems, and engineering processes for assigned functional area and collaborate with other global technical teams.
• Works with Operations and Maintenance teams to troubleshoot, modify, and improve packaging and processing equipment.
• Collaborates with Department Managers to improve productivity through process changes, equipment replacement, or additional equipment.
• Champion Safety objectives; strive for zero incidents and supports a people-centered safety culture within the maintenance and engineering teams.
• Provide leadership and coaching to continuously improve the effectiveness of the technical function.
• Strict adherence to Company and OSHA safety requirements, Standard Operating Procedures (SOP’s), Good Manufacturing Practices (GMP) Compliance, and Food and Drug Administration (FDA) regulatory standards.
• Maintain compliance with all state and federal regulations.
• Support reduction in environmental impacts across all sites, including energy savings and utility monitoring.
• Establish and maintain constant communication across all levels of the organization.

Key Requirements and Technology Experience:

• Key skills; Project engineering including design, procurement, construction management, installation, and qualification.
• 2D/3D CAD experience (AutoCAD or Solidworks) and drawing development.
• 2+ years of project management, process design, manufacturing, and contractor supervision
• Bachelor's degree in engineering (Electrical, Mechanical, or Chemical)
• Project Management Professional Certification
• Professional Engineer Certification
• 2+ years of project management, process design, manufacturing, and contractor supervision.
• Must be well rounded with a solid grasp of many engineering disciplines as well as plant operations and construction.
• Proven track record developing and executing major, complex projects (over $1MM).
• Experience with technical writing via establishing Work Instructions, SOPs, and OPLs
• Mechanical aptitude & Critical Thinking Skills.
• Ability to read and understand engineering drawings and technical documentation
• Excellent written and oral communication skills; able to connect with all levels of the organization.
• Expert planning, organization, and time management skills.
• Required Competencies: Drive for Results, Action Orientation, Command Skills, Functional/Technical Skills, Priority Setting, Planning, Managing and Measuring Work, Process Management, Problem Solving, Decision Quality, Customer Focus, Integrity and Trust, Listening, Peer Relationships, Directing Others, and Comfort Around Higher Management
• Experience in Food or Pharma manufacturing following FDA regulations is preferred.
• Experience with site utilities, such as chillers, boilers, air compressors, etc. is preferred.
• Strong emphasis on sustainability and carbon reduction projects is preferred.
• Proficiency in reading, creating, and modifying P&IDs is preferred.

Our client is a leading Pharmaceuticals Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration

Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

By applying to our jobs, you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Power the data centers, hospitals, and other mission-critical facilities of tomorrow-designing both rugged rental products and stationary generator-set packages that keep them online. As an Engineering Detailer/Drafter you'll work in a unique manufacturing and dealer environment, leveraging AutoCAD and Inventor skills to create and detail drawings for parts, weldments and assemblies.

• Create clear 2D/3D drawings for skids, bases, enclosures, fuel/cooling/exhaust, and wiring layouts using company CAD standards.
• Turn engineer/customer inputs into buildready fabrication drawings and BOMs.
• Work with Project Management, Engineering, Supply Chain, and the Fab Shop to resolve questions and keep drawings productionready.
• Keep drawing sets current-apply redlines, revisions, and asbuilt updates; maintain files and version control.

• 2+ years of experience with Inventor and Autocad in a manufacturing environment
• Proficiency with Caterpillar toolsets (CAT ET, CAT Monitoring Software, SIS Web, TMI, EDDC) is highly desirable.
• Working knowledge of diesel- and natural-gas generator sets is preferred, not required.
• Expert-level 2D drafting in AutoCAD; 3D modeling experience required in the last year (Inventor preferred, or comparable platforms accepted)
• Microsoft Office.
• Highly organized, flexible and have the ability to work necessary hours in a fast-paced, deadline driven environment.
• Strong attention to detail.
• Proficient communications, interpersonal and organizational skills.

Altorfer Inc. offers an industry leading compensation and benefit package:

• Health, Dental, Vision, Disability, and Life Insurance
• 401(k)
• Paid Holidays
• Paid Parental Leave and Funeral Leave
• Paid Time Off: Prorated 80 hours of PTO + 1 Floating Holiday
• Education Assistance
• Personal Tool Insurance, and Safety Equipment Reimbursement
• Voluntary Benefits: Supplemental Insurance, Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection

Payrate: $21.00 - $28.00 per hour

Work is normally performed both indoors and outdoors with moderate noise conditions. Limited exposure to all weather conditions is associated with this position. Physical requirements may include speaking, listening, writing, typing, reaching, pushing, pulling, lifting, carrying, sitting for extended periods, and managing stress. Occasionally required to walk or stand for short durations on manufacturing floors or job sites. Job hazards may include tripping, slipping, falling, jobsite hazards, hand injuries, driving related hazards, equipment movement, overexertion due to stress and fatigue. Required to follow all safety protocols and wear appropriate personal protective equipment depending on the environment or location. The noise level in the work environment is usually moderate to high. The noise level in the office environment is usually moderate to low. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.