Difference Between Ic Engine And Ec Engine Jobs in Usa

Engineering Technician - Product Engineering Support

Milan, IL

24 months (can extend)

Pay rate: $28/ hours on w2

Someone working as an automotive technician or electrical technician would be a good target. They can teach some of the testing and reading of schematics if needed. Candidates must be familiar working with the tools/machinery.

MAJOR PURPOSE:

Working in the Accelerated Design Verification (ADV) group to provide project support performing test setup, monitoring, inspection, and reporting using procedures and criteria set forth in the test plan. This is a 3rd shift position. (10p-6:30a).

MAJOR DUTIES:

Assembly of test rigs based on layout drawings and setup instructions. This includes:

Mechanical assembly using hand tools and battery/air impact wrenches

Use of overhead cranes

Connecting hydraulic plumbing

Connecting electrical control cables

Requires bending, kneeling, working at floor level

Must be able to lift 25 lbs

Document any changes to the setup procedure and layout drawings for continuous improvement.

Monitor and adjust test controls as necessary to keep the tests running efficiently.

Perform test specimen inspections and make repairs as required by the defined test parameters.

Document all test related incidents and activities using a web-based application.

Contact the appropriate personnel as required to prevent safety issues, environmental issues, and failures to test equipment or specimens and perform emergency shutoff procedures if necessary.

Perform routine lab maintenance and cleaning. Including, but not limited to, mopping, vacuuming, organizing, and putting away tools/equipment in the lab.

Pick up parts from the Parts Distribution Center and perform various other errands.

PREFERRED BACKGROUND

Experience working on machinery (tear down and repair), mechanic/mechanical background

Knowledge of Windows file/folder structure and how to copy/move/rename files

Good computer skills with Microsoft Office

Ability to read dimensioned part drawings and test layout drawings

Ability to work independently

Experience with servo-hydraulic or hydraulic systems preferred, but not necessary

About US Tech Solutions:

US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The Broward County Board of County Commissioners is seeking qualified candidates for Engineering Unit Supervisor (Highway Construction and Engineering Division).

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANY TIME.



This position supports professionals responsible for managing capital and mobility advancement projects for Broward County's Highway Construction and Engineering Division. The ideal candidate will have experience coordinating with multiple entities, including municipalities, state agencies, and local authorities. Work involves the review, planning, and coordination of the design and construction of County capital and mobility advancement projects, including schedules, budgets, and staff assignments.

General Description
Performs advanced professional and supervisory engineering work in the design and review of a wide variety of engineering and environmental projects.
Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.
Minimum Education and Experience RequirementsRequires a Bachelor's degree from an accredited college or university with major coursework in civil engineering.

Requires six (6) years progressively responsible experience in professional engineering work related to roadway design and construction or closely related field, including two (2) years of supervisory experience.
Special Certifications and LicensesPossess and maintain Professional Engineer License in State of Florida for duration of assignment.

Preferences* Master's Degree in Civil Engineering, Public Administration or closely related field* Certified in the use of one (1) or more of the following engineering programs (i.e. ICPR, ASAD, HY-8, HEC-RAS, HEC-HMS, Synchro, HCS, IMSA), or similar
* Construction Training Qualification Program (CTQP) Certifications (Asphalt, Concrete, Earthwork, QC Manager, etc.)
* Professional Traffic Operations Engineer, Professional Surveyor & Mapper, General Contractor License, or similar
* Project Management Professional and/or Certified Public Manager
* Advanced Work Zone Traffic Control Training Certification
* At least ten (10) years of experience in design and construction of roadway/traffic projects
* At least five (5) years of experience in one (1) of the following specialized fields of engineering: Traffic Operations, Structures, Drainage, Geotechnical, Construction Management
* At least three (3) years of experience with MicroStation OpenRoads Designer (ORD)
* At least two (2) years of experience in governmental contract and procurement
* At least two (2) years of experience in the preparation of agenda items and/or resolutions

SCOPE OF WORK

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Schedules, assigns, and supervises engineering design projects; directs and coordinates field surveys, plan design, preparation and review, cost estimate development, and specifications preparation; participates in the development and design and review of major and complex projects.

Supervises and participates in the analysis and review of engineering studies and designs prepared by professional consultants; prepares recommendations for the consideration of professional and administrative superiors and committees.

Supervises the preparation of right-of-way and construction plans for major thoroughfares; conducts studies and prepares reports on proposed locations for future major thoroughfares; maintains liaison with appropriate outside agencies concerning projects under consideration for construction.

Supervises and participates in the activities of construction engineers, inspectors, and materials technicians in the investigation and construction of water and sewer mains, roadways, structures, and related public work projects; prepares general and special specifications for contract construction; supervises the maintenance and analysis of payment estimates and records.

Oversees and performs the technical review of remedial action plans; oversees and administers environmental licensing programs.

Conducts special engineering studies and projects relating to technical and administrative aspects of the public works function; coordinates the utilization of computer technology as related to the engineering function.

Conducts long-range studies involving other departments, agencies, and organizations; prepares reports and recommendations; seals and signs engineering plans, drawings, and documents.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs sedentary work that involves walking or standing some of the time and involves exerting up to 10 pounds of force on a regular and recurring basis or sustained keyboard operations.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to traffic; moving machinery.

Competencies

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Directs Work

• Plans and Aligns

• Optimizes Work Processes

• Ensures Accountability

• Builds Effective Teams

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is seeking a Flight Engineering Senior Manager (Level L) to support our Flight Sciences Aerodynamic Performance team based in Everett, Washington.

Position Overview:

As a senior manager, you will manage a talented group of engineers and first-level managers, driving excellence in Aerodynamic Performance which includes teams supporting performance certification, AFM, FMC, performance tools development, fleet support, operational performance, competitive analyses, NAMS and guarantee development . You will be responsible for developing and executing integrated departmental strategies, overseeing technical approaches, and fostering strong partnerships with customers, stakeholders, and suppliers. This is an exciting opportunity to lead process improvements, manage critical resources, and inspire a high-performing team in a fast-paced, innovative environment.

The ideal candidate will excel in engineering technical acumen/excellence while also being an engaging and motivating people leader, including commitment to:

• Prioritizing the development and career growth of your employees and team

• Inspiring and empowering your team through collaboration, communication, and caring

• Building and nurturing an inclusive culture by seeking different perspectives, speaking up, and actively listening to teammates and stakeholders

• Ensuring an emotionally safe work environment where employees can freely and proactively raise safety, quality and schedule concerns as soon as they are known

Position Responsibilities:

• Manages employees and first-level managers performing engineering and technical activities in the areas of Flight Engineering as a BCA Aerodynamic Performance Senior Manager.

• Develops and executes integrated departmental plans, policies and procedures and provides input on departmental business and technical strategies, goals, objectives for Aerodynamic Performance.

• Acquires resources for department activities, provides technical management of suppliers and leads process improvements.

• Develops and maintains relationships and partnerships with customers, stakeholders, peers, partners and direct reports.

• Provides oversight and approval of technical approaches, products and processes.

• Manages, develops and motivates employees and first-level managers.

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, or Chemistry 

• 3+ years of experience as a Manager leading engineering teams.

Preferred Qualifications (Desired Skills and Experience):

• Master’s degree or higher in Engineering - Aerospace Engineering, Mechanical Engineering, or a related technical field.

• 5+ years of experience in an engineering leadership related role.

• Proven ability to lead with the Boeing Values

• Extensive experience managing engineering teams and first-level managers in aerodynamics or related aerospace disciplines.

• Experience in developing and executing departmental plans, policies, and technical strategies.

• Strong expertise in Aerodynamic Performance analyses and tools, performance certification, performance guarantee processes, technical performance measures development, flight testing for aerodynamic performance, downstream utilization of aerodynamic performance parameters and data.

• Demonstrated ability to manage partner relationships and lead technical process improvements.

• Excellent leadership, communication, and interpersonal skills with the ability to build and maintain effective partnerships across diverse teams and stakeholders.

• Experience providing technical oversight and approval of engineering products and processes.

• Demonstrated ability in team building, coaching, and employee development to enhance team performance and engagement.

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union:

This is not a union-represented position.

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

$183,000 - 247,000

Applications for this position will be accepted until Mar. 21, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

The Engineering Leader is responsible for leading the Design Engineering organization across the company and ensuring consistent, high-quality, and profitable project delivery. Reporting to the Vice President of Engineering Operations, this role oversees Engineering Managers and Design Engineering teams, driving accountability, operational efficiency, and technical excellence throughout the project lifecycle.

A core focus of this position is ensuring Design and Project Engineers are positioned to perform their highest-value work-developing client relationships, shaping execution strategies, and ensuring system accuracy and expected functionality. This role partners closely with Engineering Documentation leadership to ensure documentation and support workflows are effectively leveraged, allowing Design Engineering resources to remain focused on technical leadership and client-facing responsibilities.

Responsibilities include, but are not limited to:

• 
  
  
• Own the performance, development, and accountability of Engineering Managers leading Design Engineering teams, setting clear expectations and holding leaders responsible for team results, delivery quality, and professional growth.
  
  
• Establish and sustain a culture of ownership and accountability across the engineering organization by defining measurable standards for project delivery, documentation quality, and client satisfaction, and addressing performance gaps directly.
  
  
• Drive engineering efficiency and profitability by identifying misaligned workflows, reducing non-value-added engineering effort, and ensuring appropriate use of engineering support and documentation resources.
  
  
• Partner with Support Engineering leadership to ensure effective utilization of engineering support teams, removing barriers that prevent smooth handoff and enabling Engineers to focus on high-value technical work.
  
  
• Ensure Engineers are consistently focused on client relationship development, execution planning, technical accuracy, and system functionality throughout the project lifecycle.
  
  
• Maintain visibility into presales pipeline and active project lifecycle status, comparing as-sold versus as-delivered labor, identifying value-engineering opportunities, and supporting financial performance improvement.
  
  
• Collaborate with Field and Fabrication Services and Project Management leadership to align engineering capacity with project demand, participating in resource planning and ensuring engineering support meets business needs.
  
  
• Establish, enforce, and audit engineering standards and delivery processes that support consistent, high-quality outcomes, reducing variability and improving first-time quality across projects.
  
  
• Serve as the senior escalation point for engineering-related issues impacting project delivery or client satisfaction, intervening when projects are off track and guiding recovery plans with responsible managers.
  
  
• Provide leadership input on hiring, succession planning, and organizational design for Engineering Manager roles, ensuring alignment with technical requirements and cultural expectations.
  
  
• Track, analyze, and act on key engineering performance metrics, including utilization, margin contribution, rework rates, schedule adherence, and client satisfaction, using data to drive continuous improvement.
  
  

Required Skills and Experience

• 
  
  
• Bachelor Degree Required, preferably in Engineering, Construction Management or related field.
  
  
• 10+ years of experience in systems integration, audiovisual engineering, or a related technical field with progressive leadership responsibility.
  
  
• 3+ years of experience managing managers or leading large, multi-project technical teams.
  
  
• AVIXA CTS, CTS-I, or CTS-D certification.
  Demonstrated success improving team performance and delivering measurable business results.
  
  
• Experience developing, implementing, and enforcing engineering standards and processes at scale.
  
  
• Strong understanding of the full project lifecycle from design through commissioning.
  
  
• Experience partnering cross-functionally with Sales, Project Management, and Field & Fabrication Services.
  
  
• Ability to read and interpret architectural drawings, system schematics, and technical specifications.
  
  
• Financial acumen, including labor forecasting, project budgets, and margin impact analysis.
  
  
• Strong problem-solving skills with a bias toward action and resolution.
  
  
• Effective written and verbal communication skills suitable for executive-level engagement.
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff.
Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements.

Essential Functions

Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience.

ESSENTIAL FUNCTIONS:Incumbent must have the ability to:

• Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation.
• Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments.
• Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements.
• Provide public assistance at counter and over the telephone.
• Prepare quantity and cost estimates for engineering projects.
• Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes.
• Review engineering plans to determine appropriate layout of construction projects.
• Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades.
• Make and check mathematical calculations related to surveying, drafting and basic engineering.
• Maintain accurate survey records in the form of field notes and sketches.
• Participate in a variety of engineering design and planning work related to municipal engineering projects.
• Answer questions and provide information to the public concerning engineering activities.
• Assist in development and maintenance of the record keeping and filing systems.
• Prepare, assemble and distribute copies of maps, charts and blueprints.
• Answer questions and provide information to the public concerning engineering activities.
• Perform any other tasks or functions deemed necessary to the daily operations of the employer.

EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of:

Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of:

• Terminology, methods, practices and techniques of drafting.
• Trigonometry as applied to the computation of angles, areas, distances and traverses.
• Elementary surveying techniques and practices.
• Engineering maps and records.

• Perform moderately complex engineering and mathematic calculations with speed and accuracy.
• Understand and follow written instructions and sketches.
• Use and care for drafting, surveying, and mechanical instruments and tools.
• Work independently in the absence of supervision.

The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits.

Please to view our excellent employee benefit options.

• 
  
  
• High School graduate or equivalent
  
  
• Some college
  
  
• Trade school graduate or Apprenticeship
  
  
• Associate's degree in related field
  
  
• Bachelor's degree in related field
  
  
• Bachelor's degree or higher in non-related field
  
  
• Equivalent to Bachelor's degree in related field
  
  
• Master's degree or higher in related field
  
  
• None of the above
  
  

• 
  
  
• No experience
  
  
• Less than one (1) year.
  
  
• One (1) year or more year(s) but less than two (2) years.
  
  
• Two (2) or more years but less than four (4) years.
  
  
• Four (4) or more years but less than six (6) years.
  
  
• Six (6) years or more but, less than eight (8) years.
  
  

Required Question

*At Securian Financial the internal position title is Infrastructure Dir."

Mission

"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."

Positioning

The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.

This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.

• Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.

• Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.

• Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.

Scope of Accountability

Resilience Engineering & Cloud Reliability

• Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.

• Own resilience automation, chaos testing, and IaC-based recovery validation.

• Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.

Quality Engineering & Continuous Testing

• Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.

• Drive automation-first testing (functional, non-functional, performance, resilience).

• Embed observability-driven quality validation and contract testing across services.

Performance, Capacity & Efficiency Engineering

• Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).

• Partner with Platform & Infrastructure teams to tune performance across application and platform layers.

• Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.

Cross-Domain Architecture Collaboration

• Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.

• Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.

• Engage Data Architects for data resilience, replication, and pipeline reliability.

• Work with Business Architects to align technical reliability goals with critical business outcomes.

Leadership & Talent Development

• Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.

• Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.

• Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.

Core Technical Competencies

• AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.

• Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.

• Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.

• Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.

• Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.

• Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.

• Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.

• FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.

Leadership Competencies

• Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.

• Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.

• Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.

• Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.

• Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.

Qualifications & Experience

• 12+ years in cloud engineering, reliability, or platform leadership roles.

• 5+ years leading Sr. Managers/Managers in technical domains.

• Proven expertise across AWS, with working knowledge of Azure and GCP.

• Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.

• Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.

• Certifications:

  • Required: AWS Certified Solutions Architect - Professional

  • Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect

Success Metrics

• 99.9% availability maintained for Tier-1 workloads.

• 100% coverage of DR automation for Tier-1 services.

• 25% annual increase in automated quality/test coverage.

• 15% annual improvement in resource efficiency and cost performance.

• Documented resilience participation across all enterprise architecture blueprints.

• Positive "technical peer readiness" and succession rating from Head of REO.

Summary Value Proposition

This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.

It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

Project Management Organization / Corporate Services

This position is not eligible for recruiting or sourcing by outside parties.

Disclaimer: Be cautious and only respond to emails from our \" \" domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels.

We've got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don't delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc.

The primary functions of the Project Manager is to plan, manage, and implement engineering improvement projects with the objective of delivering improved engineering quality for the client by ensuring engineering processes, systems, and resources are integrated and optimized to achieve performance goals. The position requires a working knowledge of power industry design and construction practices, standards, and processes as well as the use of independent judgment, enhanced verbal and written communication skills, and ability to work with minimal supervision with the support of a team consisting of local and remote resources. The ideal candidate would have a Bachelor's or Associates degree in Engineering or Technology, Business, Construction Management, or related field from an accredited curriculum, and a minimum of eight years of relevant experience with at least two years' experience independently managing design or construction projects.

Desired PM Functions:

• Successfully deliver on rapid-response special projects, including but not limited to, gathering data, meeting with stakeholders and documenting findings, development of special reports, etc.
• Perform detailed project audits at various design stage gates
• Evaluate new engineering project scope documents, identify risks, develop response plans for implementation by the larger project team
• Identify, document, assign, track, and facilitate completion of improvement projects
• Manage continuous improvement opportunity information system, including intake of new opportunities, tracking and communicating of status, progress, and coordination with larger team to communicate barriers and get them resolved.
• Investigate high impact project issues and perform root cause analyses (RCA) to assist in driving continuous quality improvement efforts
• Work with information management and other resources to generate relevant reports and/or bulletins to communicate performance metrics, status of activities, etc.
• Identify target areas for improvement opportunities based on reports and results of audits, analyses, etc.
• Utilize outstanding interpersonal skills to provide guidance and mentorship to client resources according to needs identified in various reports.
• Initiate projects: Complete project planning documents, which include detailed scope/schedule outline for completion while looking for and finding ways to improve operations; process efficiency
• Project Definition: Assist Project Team in defining/clarifying project scope and level of detail required, satisfying customer expectations and projecting requirements.
• Maintain Project Status: Keep the project status reporting system current with the actions and changes that take place on assigned projects
• Manage Project Implementation: Leads assigned project team, ensuring that project goals/objectives are achieved, and all business processes and applicable procedures are followed
• Communicate effectively with project team, client, and 3rd parties as required to facilitate coordination of activities
• Coordinate/Communicate with peers: Work with project team to identify, document and resolve changes that may impact performance of projects

Knowledge, Skills, and Abilities:

• Capable of handling broad scope projects that have medium to long-term focus and applying knowledge to handle complex problems independently under the direction of a Program Manager and/or client management personnel.
• Possess solid verbal and written communications skills. Ability to coordinate with and interface with contractors, vendors, engineers, colleagues, and other electric utilities personnel at a high professional level
• Display strong interpersonal skills to build relationships and work effectively with clients, peers, and affiliates
• Strong capability in Microsoft Word and Excel
• Willingness to develop, promote and comply with Mesa and client safety requirements
• Ability to travel regionally to Northern Indiana for project requirements
• A background in substation design/engineering or transmission/distribution line design/engineering is preferred
• Ability to review project designs for potential problems and provide solutions that are consistent with industry, client, and internal standards
• Prioritize and schedule multiple tasks to meet project timelines

Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Associates or better in Engineering or related field.

Bachelors or better in Business Administration or related field.

Bachelors or better in Engineering or related field.

Project Mgmt Prof (PMP)

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Systems Engineering, Integrated Systems Department is seeking a Systems Engineering Technical Lead for the NASAMS product line. This role requires strong technical expertise and engineering leadership skills to drive the design and development of world-class air and missile defense systems.

The Integrated Systems Department supports Raytheon by providing world-class weapon systems engineering. Domain expertise includes radar systems, effector systems, battle management, command and control, network design, battlespace integration, and interoperability for both domestic and international customers.

You will work alongside motivated engineers who are responsible for conducting systems engineering studies and trades; supporting system requirements definition and analysis; and contributing to algorithm development, integration, test, and evaluation.

What You Will Do

• Provide technical oversight and management for a variety of Systems Engineering efforts

• Concept and requirements development (including decomposition and flowdown) within a mature product-line

• Concept of Operations (CONOPS) development and design

• Algorithm optimization and development

• Multi-disciplinary development efforts across the kill-chain for an Air and Missile Defense System

• Collaboration with customer to bring new capabilities to the warfighter

• Functional analysis of real world and test data; trade studies to bring advanced features to fielded system

• Support and lead Internal and External Program and Design Reviews

• Collaborate with other IPT/CPT leads from the various functions and products

• Support and lead Internal Research and Development for future capability upgrades

• System integration and test support, including live fire test events

• Periods of travel up to 25% of time both domestically and internationally

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience

• Experience with Air Defense Systems in systems engineering roles supporting development or production

• Experience with managing budget, scope and/or earned value

Qualifications We Prefer

• Experience interfacing with external customers and industry partners

• Excellent communication skills, written and verbal, with a variety of audiences

• Self-motivated, passionate leader

• 5+ years of experience in Air Defense Systems, Systems Engineering production or development

• Existing DoD Security Clearance

• Knowledge of Air Defense systems (examples – Patriot and NASAMS Systems)

• Experience managing competing programmatic priorities

• Experience making challenging technical decisions

• Familiarity with the Raytheon Integrated Product Development System (IPDS) or equivalent

• Experience with Earned Value Management (EVM) (plus, experience with Raytheon execution of EVM)

• Advanced degree in EE, CE, Physics, Math, ME, Aerospace\

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms