Deckorators Railing Jobs in Usa
408 positions found — Page 2
At A. Stucki Company, we’re all about innovation, engineering excellence, and keeping the rail industry on track—literally! Founded in 1911, we’ve evolved into a powerhouse of businesses delivering cutting-edge parts and services for rail systems worldwide. From dynamic control products and brake system components to springs, bearings, and track infrastructure, we’ve got rail covered. But we don’t stop there—our services include remanufacturing, repair and more. Over a century strong, we’re redefining what it means to move the world forward, one railcar at a time.
What sets us apart?
Global Impact: Be part of a team that's making waves on a global scale. Your work at A. Stucki Company will contribute to solutions that transcend boundaries and impact lives.
Collaborative Culture: We value teamwork and collaboration. Our open-door policy ensures that your ideas are not only heard but valued. Together, we build the future.
Continuous Learning: Embrace a culture of continuous improvement. At A. Stucki Company, we invest in your professional development, providing resources and opportunities to help you reach new heights.
Diversity and Inclusion: We celebrate differences and believe in the strength of diversity. Join a workplace that encourages individuality and values the unique perspectives each team member brings.
This person will be responsible for a variety of different duties in a manufacturing environment, primarily reconditioning of railcar-related components. In this role you will interact with multiple levels of professionals and spend most of your day in an industrial setting performing general labor on a production line. This position calls for a highly motivated self-starter who can wear many hats, work at a fast pace, and wants to work hard every day. We are ideally looking for someone who has a background in industrial labor, but it is not required for this role.
Duties/Responsibilities:
- Breakdown and inspect rail car bearings.
- Repair or replace faulty components of the bearings.
- Reassemble and prepare rail car bearings for shipment.
- Always demonstrate compliance with safety and quality standards.
- Maintain a clean workstation and production floor.
- Be an active team member who is focused on quality and production goals.
- Work well with others and immediately report any safety concerns or personnel issues to management.
Skills/Experience Requirements:
- 1+ years of manufacturing experience is preferred.
- Ability to work at a fast pace.
- Experience using tools and operating machinery is preferred.
Open Schedule:
- Dayshift: 6am – 6pm. Will work a 36/48 hour weekly rotating schedule. That is 3 12 hour shifts one week, and 4 12 hour shifts the next.
Pay: $19.50 per hour
Benefits:
- Pay Schedule: Paid weekly!
- Health Coverage: The company covers 80% of medical, dental, and vision premiums, ensuring comprehensive healthcare for you and your family.
- Retirement Savings: Enjoy immediate full vesting in our 401(k) plan, with a generous company match to support your financial future.
- Life Insurance: Receive company-paid life insurance for peace of mind and security.
- Paid Time Off: 11 paid holidays, plus paid vacation, and sick time available in your first year.
- Work-Life Balance: Supportive benefits designed to help you maintain a healthy work-life balance.
Baer is looking for SAP SD Freight Billing Consultant for a 9+ month project located in Jacksonville, FL
Title: SAP SD Freight Billing Consultant
Location: Hybrid - Jacksonville, FL (Onsite every other week - 4 days)
Duration: 9 months
Rate: Hourly Plus Expenses Reimbursed
Alignment: W2 or C2C
Job Summary:
We are seeking an SAP SD Freight Billing Consultant with strong experience in rail freight processes to support a RISE with SAP transformation. The consultant will help design and deploy standardized freight rating, billing, and settlement processes using SAP S/4HANA best practices. The ideal candidate has hands-on freight billing experience in the railroad industry and understands how these processes are implemented in a cloud environment using SAP Activate methodology.
Description
- Lead SAP SD freight billing design within a RISE with SAP S/4HANA implementation
- Configure freight rating, pricing procedures, and rail-specific charges (line haul, fuel surcharge, demurrage, detention, switching, and accessorials)
- Support migration from legacy ECC or third-party rail billing systems to S/4HANA Cloud
- Facilitate fit-to-standard workshops and document gaps with cloud-compliant solutions
- Collaborate with logistics and operations teams to align billing with railroad business models (bulk rail, intermodal, carload)
- Configure integrations between SD, TM/LE-TRA, MM, and FI/CO for freight settlement
- Support data migration for rate tables, pricing conditions, railcar data, and contracts
- Lead testing cycles (unit, SIT, UAT) and support cutover readiness
- Provide post-go-live hypercare and continuous improvement support
Requirements
- 5+ years of SAP SD configuration experience with freight billing focus
- Strong knowledge of railroad freight processes and rate structures
- Experience with SAP S/4HANA, preferably in a RISE environment
- Solid understanding of SAP pricing, condition techniques, and integrations
- Familiarity with SAP Activate and fit-to-standard methodology
- Experience with rail-related EDI/IDoc messages is a plus
- Strong communication and stakeholder management skills
- Bachelor’s degree in Information Systems, Supply Chain, Engineering, or related field (or equivalent experience)
- SAP certification preferred
Company Overview:
Baer provides best-in-class engagement experiences for our consultants. Our job requirements are carefully vetted and are typically associated with pivotal programs offering tremendous opportunities to expand your skills leveraging the latest solutions.
Baer is an equal opportunity employer including disability/veteran.
ALL OPEN JOBS
Some see the railway as transportation, while at Plasser American we see it as transformation. The story of how steel tracks turned the American promise into American progress and forged a trusted pathway to the possibilities of the future. It’s a story that continues today, an American legacy unfolding mile by mile. There is a lot riding on those tracks and we know that support, quality and know-how are all important aspects in staying on track.
That’s why the Plasser American tradition begins with a promise. A promise to do things right. An unapologetic commitment to quality that makes us the longtime trusted leader in cutting edge American made innovations for the North American railway. It’s a promise to see things differently to turn ordinary steel into safer passages. To be a partner that you can count on to engineer solutions for the challenges of today and for the opportunities of tomorrow. From research and design, expert manufacturing and delivering unapparelled services, our customers trust us to keep them ahead of the curve.
Progress is about more than getting from Point A to Point B. It’s knowing you have a trusted foundation to move you forward toward new possibilities waiting around the corner. Join Plasser American to become part of our team forging ahead towards new opportunities in railway maintenance. The railway is a path to the future, choose this path and apply today.
Job Description
Chief Operator
Plasser American – Danbury, CT
Plasser American is making the world a safer place by providing non-destructive testing services and products to the railroad industry. We are committed to our employees and provide many opportunities for training, development, and advancement. Our highly trained professionals go through rigorous training that exceeds industry standards.
The Operator, “On the Road”, position which requires extended travel including several months at a time without the possibility to go home and do make every effort to get our teams home whenever possible at a reasonable interval.
Operators are considered to be a very important position to hold as he is responsible for the safe operation on rail and on road as well as the preventive, actual and post maintenance or repairs of the RFD vehicle. Operators work very closely and as a Team with the Chief Operator both responsible to minimize downtime and deliver the RFD service according to schedule.
Operators represents the company image as much as any other Team members. We expect the team to act professionally and care for the image when servicing customers.
Operator is also responsible for any identified safety events or obstacles at all time along with the Chief Operator. Operators attitude, behavior and communication skills must be to the highest standard to create an environment of trust and respect.
RESPONSIBILITIES
- Operator reports directly to the Field Manager. In his absence, will report directly to other Field Manager in place or Manager of UT RFD Services as a last resort. The Operator will follow Chief Operator guidance while in operation.
- Operator will assist Chief Operator in marking the rail defects according to set standards;
- Will remain well versed with a professional attitude towards colleagues, customers and general public reflecting a positive image for the company;
- Shall ensure that all railroad and highway safety as well as operating procedures are maintained and applied to the best of his capacity;
- Shall be accountable, professional, drive safety and quality as the number one priority;
- Shall be open to changes in the workplace and apply directives according to set standards established;
- Adhere and execute instructions in reference books and customer playbooks;
- Shall partner with Chief Operator to maintain a high standard of maintenance, including cleanliness and 5S on trucks as much interior as exterior;
- Produce all necessary paperwork including but not limited to, elog reports, maintenance reports, trip reports, fuel reports, etc.
- Shall perform Pre and Post-trip maintenance every working day, to include carriage, hy-rail and truck. Regularly grease, lube, tighten bolts, replace worn parts under the supervision and directives of the Chief Operator;
- Will ensure validity of any IFTA Sticker registration and insurance and reports to Field manager as directed,
- Is the overall responsible of the vehicle and its maintenance;
- Ensures Logbooks, DOT papers including Timesheets are maintained;
- Ensure compliance with all DOT regulations including hours of serviced regulation.
- Will coach, train, protect and assist new employees, Operators, in the wanted work environment established;
- Maintain controlled expenses as low as possible;
- Complete weekly expense reports, timesheets, inventory and general truck condition (repairs needed current and preventive);
- Operator understand that truck is to be parked at same lodging location as the Chief Operator every night unless otherwise specified.
- Performs other job duties as assigned.
EXPERIENCE
- Experience:
- Excellent safety record
- Knowledge in computer programs, electrical and mechanical is a plus;
- Valid driver’s license Class A or B with Air Brake endorsement;
- Must continuously meet company & DOT Driving Standards
- Special Education:
- Excellent written and verbal communication skills with high level of attention to detail
- Minimum of a High school diploma or GED. Mechanical, electrical, troubleshooting knowledge preferred.
- Computer and Other Skills:
- Microsoft Office skills, including and not limited to Excel, Word, Microsoft Teams, Concur, and more;
GENERAL REQUIREMENTS
- Extended travel capability
- Punctual
- Have all safety training valid for customers and eRail Safe
- Being able to travel to customers anywhere in North America (Valid Passport)
- No Criminal Records
- Communicate in English (written & spoken, French for Eastern Canada)
CONDITIONS
While performing the duties of this job, the employee frequently works near moving mechanical parts and is frequently exposed to dust, oil, grease, fumes or airborne particles. Although work is primarily done inside a testing vehicle the employee might frequently be required to be outside in any weather conditions.
Must be able to lift and carry parts up to 75lbs. Willing to perform occasional mechanical tasks
Must be able to negotiate varied ground conditions including uneven, unstable and steep grade conditions. Requires the use of hands and fingers to handle or feel objects, tools or controls. Must be capable of regularly climbing up to 10 feet. The employee is required to talk and hear. Normal correctable vision is required.
Drug Screen Type
Pre-Employment Drug and Random Alcohol and Drug (FRA)
Benefit Highlights
Job Type: Full-time
Benefits:
- Accrue 80 Hours of Paid Time Off during your first year of employment
- 10 Paid Holidays per year
- 401(k) match of $0.50 for every $1.00 you contribute up to 6% of your salary
- You may receive a merit bonus after completion of the audit at the end of the fiscal year
- Tuition Reimbursement
- Free Short and Long Term Disability after 90 days of employment
- Free Life Insurance – 2 times your annual salary
- Company Events
- Free employee medical and dental coverage. – valued at $7,500.00
Willingness to travel
- 75% (Required)
As part of the Plasser family brand, which is the largest Maintenance of Way equipment provider in the world, PAC is a rapidly growing provider of railway equipment in North America. Continuing for the next few years, PAC will continue to make significant investments in the North American Market including a new office building and a substantial addition to our manufacturing facility. PAC is making the needed investments to continue its growth trajectory for many years to come. The next several years will be an exciting time of transformation. We look to the future to enhance our team and achieve our goals.
PI3f964d20710c-31181-38807905
Attractive position with 2 physicians + Nurse Practitioner on all night shifts.
We have an established and successful program of 20+ physicians and 5+ midlevel practitioners.
Full-time, part-time, and per diem night opportunities available.
Generous night coverage differential.
Non-nocturnist openings also available.
This is an excellent employed opportunity at a large community hospital in a beautiful suburban NY location.
We offer a highly competitive compensation package, including base salary plus quality incentives, comprehensive benefits, as well as generous allowances for CME, Dues, and relocation.
We have a balanced work schedule with the option to cover 7 on 7 off.
Job Highlights:Vassar will be building a new 696,000-square-foot, seven-level inpatient pavilion with 264 private medical/surgical patient rooms and 30 critical care rooms over the next 3 yearsNewly updated and highly competitive compensation package Generous allowances for CMEs, Dues, and RelocationCollegial group and balanced work/life scheduleEmployed position with financially stable and growing hospital system and multi-specialty practice with over 200 primary care and specialty providersStrategic location between New York City and Albany along the Hudson River with easy commuter access via Amtrak and Metro North Rail linesLocated on the banks of the scenic Hudson River, Vassar Brothers Medical Center is a 365-bed tertiary care hospital that provides the leading acute and critical emergency care in the region.
Vassar focuses on providing the highest quality care and meeting the needs of the community of by consistently adding new services and state-of-the-art treatments with established centers of excellence in cardiac services, cancer care and women and children's health services.
Vassar is consistently ranked as one of the strongest cardiac programs in the United States and one of the Top 100 Heart Hospitals by Modern HealthCare Magazine.The Hudson Valley boasts a terrific quality of life.
From hiking, biking, and boating, to cafes, art galleries, and local farmers markets, this beautiful suburban location offers endless ways to spend your leisure time.
Excellent housing and outstanding schools can be found throughout the region.
The Mid-Hudson Valley is also home to many fine colleges and universities, including Vassar College, Bard College, Marist College, SUNY New Paltz, and the Culinary Institute of America.
Only 75 minutes north of New York City, the area offers easy commuter access to the city via Metro North Rail Road and Amtrak rail lines.
Our vibrant cities and picturesque villages interweave culture, history and recreation in one of the countrys most livable locations
At A. Stucki Company, we’re all about innovation, engineering excellence, and keeping the rail industry on track—literally! Founded in 1911, we’ve evolved into a powerhouse of businesses delivering cutting-edge parts and services for rail systems worldwide. From dynamic control products and brake system components to springs, bearings, and track infrastructure, we’ve got rail covered. But we don’t stop there—our services include remanufacturing, repair, and more. Over a century strong, we’re redefining what it means to move the world forward, one railcar at a time.
What sets us apart?
Global Impact: Be part of a team that's making waves on a global scale. Your work at A. Stucki Company will contribute to solutions that transcend boundaries and impact lives.
Collaborative Culture: We value teamwork and collaboration. Our open-door policy ensures that your ideas are not only heard but valued. Together, we build the future.
Continuous Learning: Embrace a culture of continuous improvement. At A. Stucki Company, we invest in your professional development, providing resources and opportunities to help you reach new heights.
Diversity and Inclusion: We celebrate differences and believe in the strength of diversity. Join a workplace that encourages individuality and values the unique perspectives each team member brings.
This position is at our Seco Machine location where we are a leading manufacturer of components for the railroad industry. This role is responsible for operating, setting up, and maintaining CNC equipment to produce high-quality parts that meet engineering specifications and production standards. The ideal candidate has strong mechanical aptitude, experience reading blueprints, and a commitment to safety and precision.
Responsibilities / Job Duties:
- Set up, adjust, and operate CNC mills and lathes, as well as conventional and specialty machine tools.
- Utilize precision measuring instruments such as calipers, micrometers, indicators, and scales to perform setups and verify part accuracy.
- Interpret drawings, blueprints, specifications, sketches, manuals, and sample parts to determine dimensions, tolerances, operation sequences, and setup requirements.
- Inspect completed parts to ensure they meet dimensional and quality standards.
- Perform routine and preventive maintenance on machines and equipment as required.
- Work independently with minimal supervision, seeking guidance on complex setup or operational issues when needed; all work is subject to final inspection.
- Analyze production information, troubleshoot machining challenges, and implement effective solutions to maintain quality and efficiency.
Requirements/Qualifications:
- 2+ years of CNC lathe or mill experience is required.
- Experience with machine setups, tooling, and edits are preferred.
- Basic math and computer skills are necessary.
Open Schedule(s):
- 1st shift working 4 10s: Monday – Thursday, 5am-3pm.
Benefits:
- Pay Schedule: Paid weekly!
- Health Coverage: The company covers 80% of medical, dental, and vision premiums, ensuring comprehensive healthcare for you and your family.
- Retirement Savings: Enjoy immediate full vesting in our 401(k) plan, with a generous company match to support your financial future.
- Life Insurance: Receive company-paid life insurance for peace of mind and security.
- Paid Time Off: 11 paid holidays, plus paid vacation, and sick time available in your first year.
- Work-Life Balance: Supportive benefits designed to help you maintain a healthy work-life balance.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.
As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities
- Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes
- Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
- Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.
- Determine and/or develop methods where procedures may not be available.
- Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.
- Operate, use and maintain overhead maintenance work platforms
- Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.
- Inspect and maintain building runway rails and expansion joints.
- Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.
- Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.
- Maintain logs, charts, and perform written and verbal tie-in records.
- Prepare reports and schedules as required.
- Work with and assist employees of other classifications as required.
- Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.
Physical Demands and Potential Hazards:
- Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
- Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
- Work in environments that may involve contact with metals, solvents, and coolants.
- Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
- Adapt to varying noise levels and atmospheric conditions.
- Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications
- 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances
- 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.
- This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
- Able to lift up to 35 pounds.
Preferred Qualifications:
- Experience inspecting and maintaining building runway rails and expansion joints.
- Preference given to those with 2 years overhead crane experience.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
- Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
- This position is for all shifts
Total Rewards & Pay Transparency
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: 33.32 – 61.01
Applications for this position will be accepted until May. 29, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Emergency Care Center Technician Senior works with the RNs in the Emergency Room to provide care to patients. They have special skills beyond those of a basic Emergency Technician; for example, they can perform venipuncture, dress wounds, remove staples and sutures, and measure peak expiratory flow rate.
Responsibilities:
Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.Gives basic care to patients in a compassionate manner.Takes and records the following vital signs and reports any change or abnormal findings to the RN: Temperature, pulse, respiration rate, and blood pressure.Gives the following treatments, maintaining respect for patient's privacy: weigh patient, test urine (acetone, sugar, blood), apply warm/cold compresses, apply ice caps, and care for the body after death.Collect specimens according to RN's instructions and to the procedure. Urine and stool specimens are labeled and taken to the lab. Also performs Accuchecks/blood sugar.Assists patients to and from the bathroom.Positions patients according to RN's instructions (fowler, semi-fowler, etc.) and changes position as frequently as ordered and using good body mechanics.Assists with stringing IVs under the direction of the Emergency Department nurse.Assumes certain nursing functions and responsibilities under the guidance of a Licensed nurse.Is responsible for the following in the admission of the patient: bringing the patient to the room from admitting or ER as needing; assisting the patient to bed and applying armband; obtaining and reporting to RN vital signs, height, weight, and history of allergies; assuring patient is comfortable and orientated to surroundings; and assisting RN with an initial interview.Is responsible for instructing and explaining the following in patient/family orientation: call signal, smoking policy, and side rail policy. Is responsible for the following inpatient discharge: helps patient collect personal belongings; takes patient per wheelchair to lobby or car; and removes all equipment from the room, cleans, and returns to SPD or a storage area.responsible for the following in transferring patients.Collects patient's personal belongings, assembles equipment to go with the patient, accompanies the patient to a new room, and stays with the patient until floor nurse enters the room.Is respectful to patient's right to privacy and confidentiality: knocks before entering the room, does not expose patient unnecessarily in giving care, closes the door when giving a treatment, and keeps patient information confidential.Answers call lights promptly and with a pleasant, helpful attitude.Observe the RN performing the following procedure and nursing functions. Then after a satisfactory return demonstration to the RN, the EDT may perform procedure and nursing functions independently, under the direction of the RN.Check restraints frequently to make sure the patient has not removed them or that they are neither too loose nor too tight. Obtains permission of RN before removing them for any reason.Notifies RN of any "beeping" infusion pumps. Checks fluid level in the bag and notifies RN when it is low.Notifies RN immediately if any swelling, redness, or if the patient complains of anything. Assembles IV equipment.without receiving instruction from the ER Nurse.Inserts Foley catheter using good technique and displaying proper knowledge about catheterizing patients.Assures that there is no pull on the catheter while giving care. Assures that there are no kinks in the catheter or loops that fall down below the level of urine in the drainage bag. Assists the RN in giving Foley catheter care. Collect specimens as instructed by RN.Is conscious of maintaining a sterile atmosphere by knowledge of sterile technique.Demonstrates proper cleansing and preparation of wounds. Can properly assist physicians with suture repairs.Can properly suction secretion/fluid from mouth, throat, and nose.Is knowledgeable in shock management by knowing properly apply pressure to a bleeding wound. Can properly apply pneumatic anti-shock trousers.Can properly apply cardiac monitor (EKG) leads.Can properly handle fractures and apply splints and slings as physician orders. Can fit the patient's crutches properly. Knows and utilizes proper body mechanics.Understand the importance of the "No Smoking" sign on the door. Replace the mask or cannula if they become displaced. If the tent is in use, ensure that the ends of the tent are tucked in at all times. Promptly reports to RN if the patient complains or looks like having difficulty breathing.Assists physician with application of casts and splints. Assumes position of the limb is maintained as instructed by RN. Notices swelling, coldness, redness, or discoloration of toes or fingers and reports to RN. Reports any bleeding through the cast or complaints of pain to the RN.Ensures side rails remain up and the patient remains in a bed after the pro-op medication is given.Applies anti-embolic hose appropriately and in the correct size.Assist in moving the patient to the stretcher.Safely performs surgical shaves and preparation of skin.Takes vital signs as requested by RN for post-op care. Assists with turning, coughing, and deep breathing as instructed by RN.Can properly perform EKGs.Performs phlebotomy skills.Contributes toward maintaining a clean, safe environment for the patient and assumes certain responsibilities for the care and use of equipment.Ensures beds are in low position except when raised to give care and are locked at all times.Adheres to procedures for transferring patients to chairs, wheelchairs, and stretchers and in transporting patients in wheelchairs and stretchers.Ensures that the stretcher is locked.Ensures that there is a clear pathway from patient door to bedside at all times.Assists in maintaining a clean environment by practicing good hand washing.Adheres to isolation procedures.Reports condition of un-cleanliness on the unit to Shift Coordinator.Knows the use and operation of equipment he/she is required to use.Knows the care and location of all other equipment used on the unit.Uses supplies economically and only for the use intended.Knows how to stock and maintain equipment in the department.
Job Requirements:
Education/Skills
Certification required.Experience
Two (2) years of patient care experience in an acute care hospital or EMT field/Emergency Care Setting required.Licenses, Registrations, or Certifications
EMT license required.BLS required.
Work Schedule:
PRN
Work Type:
Per Diem As Needed
Summary:Emergency Care Center Technician Senior works with the RNs in the Emergency Room to provide care to patients. They have special skills beyond those of a basic Emergency Technician;for example, they can perform venipuncture, dress wounds, remove staples and sutures, and measure peak expiratory flow rate.Responsibilities:
Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Gives basic care to patients in a compassionate manner.
Takes and records the following vital signs and reports any change or abnormal findings to the RN: Temperature, pulse, respiration rate, and blood pressure.
Gives the following treatments, maintaining respect for patient's privacy: weigh patient, test urine (acetone, sugar, blood), apply warm/cold compresses, apply ice caps, and care for the body after death.
Collect specimens according to RN's instructions and to the procedure. Urine and stool specimens are labeled and taken to the lab. Also performs Accuchecks/blood sugar.
Assists patients to and from the bathroom.
Positions patients according to RN's instructions (fowler, semi-fowler, etc.) and changes position as frequently as ordered and using good body mechanics.
Assists with stringing IVs under the direction of the Emergency Department nurse.
Assumes certain nursing functions and responsibilities under the guidance of a Licensed nurse.
Is responsible for the following in the admission of the patient: bringing the patient to the room from admitting or ER as needing;
assisting the patient to bed and applying armband;obtaining and reportingto RN vital signs, height, weight, and history of allergies;assuring patient is comfortable and orientated to surroundings;and assisting RN with an initial interview.* Is responsible for instructing and explaining the following in patient/family orientation: call signal, smoking policy, and side rail policy. Is responsible for the following inpatient discharge: helps patient collect personal belongings;takes patient per wheelchair to lobby or car;and removes all equipment from the room, cleans, and returns to SPD or a storage area.
responsible for the following in transferring patients.
Collects patient's personal belongings, assembles equipment to go with the patient, accompanies the patient to a new room, and stays with the patient until floor nurse enters the room.
Is respectful to patient's right to privacy and confidentiality: knocks before entering the room, does not expose patient unnecessarily in giving care, closes the door when giving a treatment, and keeps patient information confidential.
Answers call lights promptly and with a pleasant, helpful attitude.
Observe the RN performing the following procedure and nursing functions. Then after a satisfactory return demonstration to the RN, the EDT may perform procedure and nursing functions independently, under the direction of the RN.
Check restraints frequently to make sure the patient has not removed them or that they are neither too loose nor too tight. Obtains permission of RN before removing them for any reason.
Notifies RN of any "beeping" infusion pumps. Checks fluid level in the bag and notifies RN when it is low.
Notifies RN immediately if any swelling, redness, or if the patient complains of anything. Assembles IV equipment.
without receiving instruction from the ER Nurse.
Inserts Foley catheter using good technique and displaying proper knowledge about catheterizing patients.
Assures that there is no pull on the catheter while giving care. Assures that there are no kinks in the catheter or loops that fall down below the level of urine in the drainage bag. Assists the RN in giving Foley catheter care. Collect specimens as instructed by RN.
Is conscious of maintaining a sterile atmosphere by knowledge of sterile technique.
Demonstrates proper cleansing and preparation of wounds. Can properly assist physicians with suture repairs.
Can properly suction secretion/fluid from mouth, throat, and nose.
Is knowledgeable in shock management by knowing properly apply pressure to a bleeding wound. Can properly apply pneumatic anti-shock trousers.
Can properly apply cardiac monitor (EKG) leads.
Can properly handle fractures and apply splints and slings as physician orders. Can fit the patient's crutches properly. Knows and utilizes proper body mechanics.
Understand the importance of the "No Smoking" sign on the door. Replace the mask or cannula if they become displaced. If the tent is in use, ensure that the ends of the tent are tucked in at all times. Promptly reports to RN if the patient complains or looks like having difficulty breathing.
Assists physician with application of casts and splints. Assumes position of the limb is maintained as instructed by RN. Notices swelling, coldness, redness, or discoloration of toes or fingers and reports to RN. Reports any bleeding through the cast or complaints of pain to the RN.
Ensures side rails remain up and the patient remains in a bed after the pro-op medication is given.
Applies anti-embolic hose appropriately and in the correct size.
Assist in moving the patient to the stretcher.
Safely performs surgical shaves and preparation of skin.
Takes vital signs as requested by RN for post-op care. Assists with turning, coughing, and deep breathing as instructed by RN.
Can properly perform EKGs.
Performs phlebotomy skills.
Contributes toward maintaining a clean, safe environment for the patient and assumes certain responsibilities for the care and use of equipment.
Ensures beds are in low position except when raised to give care and are locked at all times.
Adheres to procedures for transferring patients to chairs, wheelchairs, and stretchers and in transporting patients in wheelchairs and stretchers.
Ensures that the stretcher is locked.
Ensures that there is a clear pathway from patient door to bedside at all times.
Assists in maintaining a clean environment by practicing good hand washing.
Adheres to isolation procedures.
Reports condition of un-cleanliness on the unit to Shift Coordinator.
Knows the use and operation of equipment he/she is required to use.
Knows the care and location of all other equipment used on the unit.
Uses supplies economically and only for the use intended.
Knows how to stock and maintain equipment in the department.
Job Requirements:
Education/Skills
* Certification required.
Experience
* Two (2) years of patient care experience in an acute care hospital or EMT field/Emergency Care Setting required.
Licenses, Registrations, or Certifications
* EMT license required.* BLS required.
Work Schedule:
7AM - 7PMWork Type:
Full Time
At RCE, we take pride in hard work and craftsmanship.
We don’t just modify machines—we build equipment that keeps America’s railways moving.
Using trusted John Deere excavators, loaders, and backhoes, we create rugged and reliable rail maintenance machines.
If you’re someone who likes to roll up your sleeves, work with your hands, and take pride in a job well done, we want you on our team.
Why RCE Equipment Solutions? Competitive Pay: Earn $20.00- $30.00+ per hour (depending on your experience).
Comprehensive Benefits Package: Access to a full range of benefits that support your health, well-being, and future.
( Link to benefits overview ) Stay Ahead of the Curve: We're committed to your development, offering hands-on experience to stay current with the latest technology and industry trends.
A Culture of Safety & Teamwork: At RCE, we prioritize safety and foster a collaborative team environment that works together to get the job done and ensure customer satisfaction.
What You’ll Do: Build Something That Lasts: Put together heavy-duty rail equipment and custom attachments that are built to handle the toughest jobs.
Make It Work Right: Ensure every part is solid and working like a charm, from hydraulics to electrical systems.
Get Your Hands Dirty: You’ll be working with mechanical, hydraulic, and electrical systems to turn raw materials into finished equipment.
Sharpen Your Skills: We’ll give you the training and know-how to keep improving and stay at the top of your game.
Take Pride in Your Space: Keep your work area clean and organized—because a tidy shop means quality work.
Safety is Key: Follow all safety procedures and help keep the whole crew safe.
Who You Are: A mechanically inclined person who knows their way around big machines.
A problem-solver with sharp diagnostic skills for hydraulics and electrical systems.
A team player who can step up and get the job done, whether you’re working alone or with the crew.
Able to work independently and with minimal supervision.
Comfortable with basic computer skills for data entry and internet use.
o Develops and administers safety programs, policies, procedures training, objectives, and other initiatives to promote safe operations and incident prevention.
o Confirms compliance with standards and best practices.
o Oversees development and administration of goals and objectives for Transit System Safety.
o Verifies rule compliance as it relates to policies and procedures, bulletins, and standard operating procedures.
• Manages Transit System Safety processes and procedures o Oversees the inspections of stations, footwalks, facilities, subways, right-of-ways, garages, bus routes and roadways.
o Collaborates with Authority personnel to identify and implement long-term solutions to systemic safety issues identified in inspections and investigations and observations minimizing liability and preventing recurrence.
o Facilitates safety incident investigations and provides recommendations in conjunction with the Accident and Investigation Unit.
• Reviews vital safety records and other documents to ensure critical and timely reporting to various departments and manages efficient recordkeeping practices to that information is available for Authority reference.
Represents System Safety and the CTA on matters involving regulatory safety activity.
• Coordinates with federal and state safety oversight agencies (RTA, FTA, OSHA, and federal and state regulators) on hazard management and loss control issues and delivers reports as needed.
• Acts as safety knowledge expert in Authority special projects and may chair committees to ensure transit safety and security activities are undertaken and completed.
• Develops and implements performance measurement and safety criteria through technology; provides oversight of inspection and investigation follow-up processes, including corrective action plans and recommendations from inspections and investigations.
• Hires, trains, develops, monitors, and evaluates staff.
Reviews and recommends personnel actions for approval.
Ensures ongoing professional development for all direct reports, including identifying pertinent training opportunities and encouraging active participation in safety professional societies.
• Performs related duties as assigned.
MANAGEMENT RESPONSIBILITIES Reporting to this position are the following jobs: Job Title • Senior Manager, Transit Safety CHALLENGES • Dealing with people who have suffered severe injury/death during accident investigations.
• Dealing with stress due to “24-hour on call” nature of the job.
• Keeping abreast of all CTA operations in connection with safety aspects.
• Maintaining awareness of liability concerns when dealing with legal community and oversight organizations.
EDUCATION/EXPERIENCE REQUIREMENTS • Bachelor’s degree in Safety Management, Engineering, or a related technical field plus seven (7) years of experience in safety program development or risk management, of which three (3) years are in a supervisory or management role, or a combination of education and experience related to the position.
• Transportation Safety Institute (TSI) training certifications (TSSP) preferred.
• Must possess a valid Illinois driver’s license.
• Successful completion required of Rail Accident Investigation, Bus Collision Investigation and Traffic Investigation I and II preferred.
PHYSICAL REQUIREMENTS • Requires remaining in a stationary position for extended periods of time and constantly operating a computer and other office productivity machinery.
• Demands include extensive walking (up to 3 miles at one time), sometimes on rocks and on narrow catwalks, and climbing (such as onto trains and back down and up and down ladders of various sizes).
• Random nature of incidents leads to irregular work hours.
• Must wear applicable restrictive personal protective equipment.
• Service Area Requirement: Exempt (Non-Union) employees must live within the boundaries of the CTA Statutory Service Area either at the time of employment or within 6 months of beginning employment at CTA.
KNOWLEDGE, SKILLS, AND ABILITIES • Detailed knowledge of System Safety Engineering Practices.
• Detailed knowledge of the methods and practices of investigations, research, analysis, and/or data compilation.
• Detailed knowledge of construction safety practices and techniques.
• Detailed knowledge of research methods and report presentation.
• Detailed knowledge of related safety federal and state rules and regulations.
• Working knowledge of transit operations, facilities, vehicles, rules and procedures desired.
• Working knowledge of Traffic Management models and best practices preferred.
• Strong project management skills.
• Strong oral and written communications skills and organizational skills.
• Strong management skills.
• Good interpersonal skills in dealing with external groups and/or organizations.
• Intermediate computer skills.
• Ability to interpret and apply federal regulations.
• Ability to work with sensitive information while maintaining strict confidentiality.
• Ability to work collaboratively with other Departments.
WORKING CONDITIONS • General office environment.
Required to carry a cellular phone.
• Working conditions are varied and include all weather ranges (from extreme cold to extreme heat, rain to snow and ice, etc.).
• Conditions also include working at extreme heights; working near electrified third rail; working in subway tunnels with limited clearance, visibility, etc.
• This position is considered a "C-List" position under the “Revolving Door” prohibition within the State Officials and Employees Act (5 ILCS 430/5-45), which contains a number of post-employment restrictions CTA employees in C-list designated positions must follow.
Among other requirements listed in this statute, CTA employees in C-list designated positions are required to follow State notification procedures to the Office of the Executive Inspector General prior to acceptance of any applicable non-State employment or may be fined significant penalties.
EQUIPMENT, TOOLS, AND MATERIALS UTILIZED • Standard office equipment.
• Various types of measuring devices, digital camera, personal computers (including handheld devices), label maker, various types of gauges, light tools (wrenches and screwdrivers), reflective safety vests, applicable restrictive personal protective equipment.
Employees and/or union members will be given priority consideration in the hiring process, per the applicable labor contracts.
Final salary will be determined in part by the qualifications of the selected candidate and may be higher or lower than target.
Applicants, if hired,must comply with CTA's residency ordinance.
CTA IS AN EQUAL OPPORTUNITY EMPLOYER No employee or applicant for employment will be discriminated against because of race, color, creed, religion, sex, marital status, national origin, sexual orientation, ancestry, age, unfavorable military discharge, disability or any other status protected by federal, state, or local laws; except where a bona fide occupational qualification exists We are committed to providing an inclusive environment for our workforce and supporting the communities we serve.
CTA will make reasonable accommodations for the known disabilities of otherwise qualified applicants for employment as well as its employees, unless undue hardship would result.
If you require an accommodation in the application or hiring process, please contact prior to the submission of your application or upon notification of your actual test date.
CTA will work with you to determine if an accommodation can be provided.
During the hiring process, CTA's Human Resources department will contact candidates with next steps .
Failure to respond to these correspondences in a timely fashion may result in your application being closed out for non-responsiveness.
Please click link below to review the benefits offered at the CTA.
STG is now contracting with quality independent owner-operators for drayage service at key rail ramps and ports throughout the United States. We need hardworking Independent Contractors like you to join our team located in Savannah, GA.
As an Independent Contractor with STG, you will be eligible for programs that can boost your profitability and save you money:
- Regional and Local Work
- Consistent Home Time
- Consistent freight
- Competitive payouts
- Local runs with weekend work
- Drop & hook freight
- Industry-leading fuel discounts
- Supportive dispatchers
- Growing port and rail business with dedicated lanes
- Ask a recruiter about our fuel discount program
STG Independent Contractor Qualifications:
- At least 22 years of age
- At least 12 months of verifiable experience within the previous 5 years
- If an applicant has 3 years of verifiable tractor-trailer experience while serving in the Military, we will now credit them 18 months of road experience (call for details)
- TWIC required
As one of the largest and fastest-growing intermodal providers in North America, we’re continually seeking to expand our network of independent owner-operators and fleet owners.We know that you have choices when it comes to how you spend time behind the wheel — our goal is to reinforce your choice of STG with every container you move.We look for hardworking, experienced, safety-conscious professionals with a strong commitment to customer service and on-time performance to join the most valued owner-operator fleet in the industry.
Not every trucking job is the same. Join STG for the career you want, with the perks you value.
Give us a call today!
STG is now contracting with quality independent owner-operators for drayage service at key rail ramps and ports throughout the United States. We need hardworking Independent Contractors like you to join our team located in Savannah, GA.
As an Independent Contractor with STG, you will be eligible for programs that can boost your profitability and save you money:
- Regional and Local Work
- Consistent Home Time
- Consistent freight
- Competitive payouts
- Local runs with weekend work
- Drop & hook freight
- Industry-leading fuel discounts
- Supportive dispatchers
- Growing port and rail business with dedicated lanes
- Ask a recruiter about our fuel discount program
STG Independent Contractor Qualifications:
- At least 22 years of age
- At least 12 months of verifiable experience within the previous 5 years
- If an applicant has 3 years of verifiable tractor-trailer experience while serving in the Military, we will now credit them 18 months of road experience (call for details)
- TWIC required
As one of the largest and fastest-growing intermodal providers in North America, we’re continually seeking to expand our network of independent owner-operators and fleet owners.We know that you have choices when it comes to how you spend time behind the wheel — our goal is to reinforce your choice of STG with every container you move.We look for hardworking, experienced, safety-conscious professionals with a strong commitment to customer service and on-time performance to join the most valued owner-operator fleet in the industry.
Not every trucking job is the same. Join STG for the career you want, with the perks you value.
Give us a call today!
STG is now contracting with quality independent owner-operators for drayage service at key rail ramps and ports throughout the United States. We need hardworking Independent Contractors like you to join our team located in Memphis, TN.
As an Independent Contractor with STG, you will be eligible for programs that can boost your profitability and save you money:
- Regional Work Available
- Quick live loads
- Night and weekend runs available
- Consistent freight
- Competitive payouts
- Local & Regional runs
- Can run to Indianola, MS
- Roughly 138 miles one way
- Drop & hook freight
- Industry-leading fuel discounts
- Supportive dispatchers
- Growing port and rail business with dedicated lanes
- Ask a recruiter about our fuel discount programs
STG Independent Contractor Qualifications:
- At least 22 years of age
- At least 12 months of verifiable experience within the previous 5 years
- If an applicant has 3 years of verifiable tractor-trailer experience while serving in the Military, we will now credit them 18 months of road experience (call for details)
As one of the largest and fastest-growing intermodal providers in North America, we’re continually seeking to expand our network of independent owner-operators and fleet owners.
We know that you have choices when it comes to how you spend time behind the wheel- our goal is to reinforce your choice of STG with every container you move.
We look for hardworking, experienced, safety-conscious professionals with a strong commitment to customer service and on-time performance to join the most valued owner-operator fleet in the industry.
Not every trucking job is the same. Join STG for the career you want, with the perks you value.
Give us a call today!
STG is now contracting with quality independent owner-operators for drayage service at key rail ramps and ports throughout the United States. We need hardworking Independent Contractors like you to join our team located in Norfolk, VA.
As an Independent Contractor with STG, you will be eligible for programs that can boost your profitability and save you money:
- Regional drivers needed!
- Consistent freight
- Competitive payouts
- Regional runs to Baltimore
- Drop & hook freight
- Industry-leading fuel discounts
- Supportive dispatchers
- Growing port and rail business with dedicated lanes
- Ask a recruiter about our fuel discount programs
STG Independent Contractor Qualifications:
- At least 22 years of age
- TWIC required
- At least 12 months of verifiable experience within the previous 5 years
- At least 1 year port experience
- If an applicant has 3 years of verifiable tractor-trailer experience while serving in the Military, we will now credit them 18 months of road experience (call for details)
As one of the largest and fastest-growing intermodal providers in North America, we’re continually seeking to expand our network of independent owner-operators and fleet owners.
We know that you have choices when it comes to how you spend time behind the wheel—our goal is to reinforce your choice of STG with every container you move.
We look for hardworking, experienced, safety-conscious professionals with a strong commitment to customer service and on-time performance to join the most valued owner-operator fleet in the industry.
Not every trucking job is the same. Join STG for the career you want, with the perks you value.
Give us a call today!
Job Description :
- 70-85% hands-on software development across all SDLC phases.
- Conduct design and code reviews; create technical documentation.
- Contribute to our DevOps model.
- Develop AI-first and generative AI-first product experiences.
- Estimate and sequence development activities .
- Analyse inputs to create software and services .
- Identify technical dependencies. Collaborate with engineers and architects.
Qualifications:
- 5+ years of software development experience in large-scale SaaS systems.
- Experience with unit/integration/functional/e2e test automation.
- Advanced experience with Java, Ruby on Rails, Spring Boot, Kafka, Kubernetes, GitHub, JUnit 4/5.
- Experience with Agile development methodologies (Scrum).
- Hands-on experience with AWS and/or Heroku. Experience with large-scale, distributed systems.
- Strong communication skills. Experience with debugging and monitoring tools (Splunk, Wavefront).
- "Get Stuff Done" attitude. Experience with the entire SDLC and CI/CD.
- Experience with Ruby on Rails and Heroku is an advantage. Knowledge of Applied AI
- $655000.00 Breast Imaging Tacoma/Seattle Washington Join a trusted radiology group with over 100 years of excellence in patient-centered care.
Position Highlights Compensation $654,000 (based on 195 shifts annually) W2 and 1099 employment options Associate and Partnership Tracks Available Schedule: Flexible scheduling options with 3 day, 4 day or 5 day work weeks available Call: No afterhours or weekends are required.
Benefits: Full comprehensive package available Paid Malpractice Volume Type: Screeners, Diagnostics, DEXA and Breast Imaging Procedures available Relocation assistance is provided Sign on Bonus Available Work onsite and work from home (Hybrid Position) Daily Stipend is paid for all onsite shifts.
State-of-the-art Breast Imaging Equipment and supportive staff.
Ideal Candidate ABR.
Breast Imaging Fellowship trained.
Able to work well with others and work as a team.
Why Youll Love Tacoma, Washington Relocating here means more than just a new jobits a lifestyle upgrade! Breathtaking Scenery- Wake up to views of Mount Rainier , Puget Sound, and endless outdoor adventures.
Affordable Living- Enjoy a lower cost of living compared to Seattlemore space, less stress.
Thriving Career Opportunities- A growing job market in healthcare, education, logistics, and tech, plus proximity to Seattles major employers.
Arts & Culture Everywhere- Explore world-class museums, local galleries, and a vibrant music scene in a revitalized downtown.
Education & Growth- Home to University of Washington Tacoma and excellent schools for lifelong learning.
Easy Access & Commute- Quick connections to Seattle and Portland via I-5, rail, and expanding light rail options.
Community & Lifestyle- Diverse neighborhoods, farmers markets, craft breweries, and a strong sense of local pride.
Contact: Joshua Ayers with AMN Healthcare! CALL or TEXT.
Facility Location Just 30 miles south of Seattle, in the shadow of Mount Rainier, pristine Tacoma offers a healthy, outdoorsy lifestyle and an abundance of natural wonders in its backyard.
The citys waterfront parks are ideal for walking, in-line skating and biking, while nearby Mount Rainier National Park offers the chance to go hiking, mountain climbing, kayaking and wildlife viewing.
Job Benefits About the Company At AMN Healthcare, we strive to be recognized as the most trusted, innovative, and influential force in helping healthcare organizations provide quality patient care that continually evolves to make healthcare more human, more effective, and more achievable.
Mammography, Mammographer, Mammogram, Breast Cancer, Mammogram Radiology, radiology radiology, radiologist
Endocrinology - Morristown
StartDate: 1/30/2026 Pay Rate: $34 $340000.00
A nationally recognized, award-winning leader in multispecialty healthcare delivery seeks a BE/BC Adult Endocrinologist to join its Endocrinology team in a community just 30 miles outside New York City.
Opportunity Highlights
Earn a $340K+ base salary with additional production and quality incentives
Receive up to a $25K signing bonus to support your transition
Take advantage of $10K relocation assistance for a smooth move
Enjoy work-life balance with a flexible clinic schedule and limited Saturdays
Work in an excellent location just 30 miles from New York City
Collaborate with 40+ Endocrinologists across a large, multispecialty care network
Practice well-rounded outpatient adult Endocrinology with no required inpatient rounding
Work a 5-day week with 35 patient-facing hours and 5 administrative hours
See approximately 24 patients per day with 30-minute new and 15-minute follow-ups
Benefit from on-site laboratory, radiology, infusion services, and in-office ultrasound at most sites
Share phone-based practice call with fellow Endocrinology providers at your site
Community Information
Morristown, NJ, offers a lively blend of small-town charm and metropolitan accessibility, nestled in the heart of Morris County, just 30 miles from New York City. With a well-preserved historic downtown, diverse dining and cultural offerings, and easy rail access to the city, its a perfect base for a physician seeking both work-life balance and regional connectivity.
Overall A rating from Niche, including being named a Best Place for Young Professionals in New Jersey
Exceptional Livability Score from Area Vibes, with A+ ratings for Amenities, Commute, Crime, Employment, and Housing
Morristown links easily to New?York City via rail (making it attractive for weekend access or secondary family commuters) and offers a downtown walkable environment with restaurants, coffee shops, and parks
Abundant opportunities for outdoor recreation, cultural events, and historic-town ambience
Enjoy a solid public school system, awarded an A grade by Niche
Facility Location
Once known as the "Military Capital of the American Revolution," Morristown is rooted in a deep heritage that's also intertwined with the history of the United States. Because of its role in the war, this town has a number of historical locations that now make up the Morristown National Historic Park. You'll also find a variety of shopping, dining, and recreational locations around town.
Job Benefits
About the Company
At AMN Healthcare, we strive to be recognized as the most trusted, innovative, and influential force in helping healthcare organizations provide quality patient care that continually evolves to make healthcare more human, more effective, and more achievable.
Internal Medicine, Endocrinology, Endocrinologist, Endocrine System, Endocrine, Diabetes, Metabolism, Physician, Md
Nuclear Medicine Radiologist
StartDate: ASAP Pay Rate: $3 $600000.00
100% Remote Nuclear Medicine/PET Radiologist
Join a trusted radiology group with over 100 years of excellence in patient-centered care. Position Highlights
* Compensation: $300,000.00 - $600,000.00
* Associate and Partnership Tracks Available
* Schedule: Flexible Remote Schedule
* Call: Required for partnership tracks
* Benefits: Full comprehensive package available
* Paid Malpractice
* Volume Type: NM/PET services at our freestanding and hospital based facilities, including an outpatient PET scanner and therognostics clinic at our Tacoma imaging center
* Relocation assistance is provided
* Sign on Bonus Available
* Work onsite and work 100% from home (Hybrid Position) Daily Stipend is paid for all onsite shifts.
Ideal Candidate
* Board-certified/board-eligible radiologist with training in nuclear medicine for a flexible 100% remote position
* Nuclear medicine residency applicants (ABNM certification) will also be considered
Why Youll Love Tacoma, Washington if you decide to relocate.
Relocating here means more than just a new jobits a lifestyle upgrade!
Breathtaking Scenery- Wake up to views of Mount Rainier , Puget Sound, and endless outdoor adventures.
Affordable Living- Enjoy a lower cost of living compared to Seattlemore space, less stress.
Thriving Career Opportunities- A growing job market in healthcare, education, logistics, and tech, plus proximity to Seattles major employers.
Arts & Culture Everywhere- Explore world-class museums, local galleries, and a vibrant music scene in a revitalized downtown.
Education & Growth- Home to University of Washington Tacoma and excellent schools for lifelong learning.
Easy Access & Commute- Quick connections to Seattle and Portland via I-5, rail, and expanding light rail options.
Community & Lifestyle- Diverse neighborhoods, farmers markets, craft breweries, and a strong sense of local pride.
Facility Location
Just 30 miles south of Seattle, in the shadow of Mount Rainier, pristine Tacoma offers a healthy, outdoorsy lifestyle and an abundance of natural wonders in its backyard. The citys waterfront parks are ideal for walking, in-line skating and biking, while nearby Mount Rainier National Park offers the chance to go hiking, mountain climbing, kayaking and wildlife viewing.
Job Benefits
About the Company
At AMN Healthcare, we strive to be recognized as the most trusted, innovative, and influential force in helping healthcare organizations provide quality patient care that continually evolves to make healthcare more human, more effective, and more achievable.
Nuclear Medicine, Imaging, Radiopharmaceuticals, Radiology, Radiologist, Radiologic Technicians, Radiologists, Physician, Healthcare, Health Care, Patient Care, Hospital, Medical, Doctor, Md
The General Manager (GM) –Battery Testing is responsible for the full P&L, operational leadership, commercial growth, and regulatory compliance of a mobility-focused TIC laboratory. The lab supports automotive, EV, aerospace, rail, and advanced mobility customers with testing, inspection, and certification services.
The GM ensures technical excellence, regulatory compliance (ISO/IEC 17025 and applicable mobility standards), strong client relationships, and profitable growth while maintaining a culture of safety, quality, and operational discipline.
Key Responsibilities
1. P&L & Business Leadership
- Own full profit and loss responsibility for the mobility laboratory.
- Develop and execute annual operating plans, budgets, and growth strategies.
- Drive revenue growth across automotive, EV, aerospace, rail, and next-gen mobility sectors.
- Monitor KPIs including revenue, margin, utilization, backlog, and cash flow.
- Optimize cost structure while maintaining service quality and accreditation compliance.
2. Commercial & Customer Strategy
- Partner with Sales and Business Development to grow key accounts and strategic OEM relationships.
- Identify new service opportunities (battery testing, EMC, environmental, durability, ADAS validation, etc.).
- Strengthen relationships with mobility OEMs and Tier 1 suppliers.
- Represent the lab in industry forums and with regulatory bodies.
3. Operations & Technical Oversight
- Oversee daily laboratory operations including testing, scheduling, capacity planning, and equipment utilization.
- Ensure compliance with International Organization for Standardization ISO/IEC 17025 and other applicable standards (SAE, IEC, UL, FMVSS, etc.).
- Maintain accreditations through bodies such as ANAB or equivalent.
- Drive continuous improvement initiatives (Lean, Six Sigma, automation).
- Ensure capital investment planning aligns with market demand and ROI targets.
4. Quality & Regulatory Compliance
- Maintain rigorous adherence to safety and quality systems.
- Lead internal and external audits.
- Manage risk mitigation strategies.
- Ensure testing integrity and data reliability for certification purposes.
5. People Leadership
- Lead multidisciplinary teams including engineering, technicians, quality, and commercial staff.
- Recruit, develop, and retain high-performing technical talent.
- Foster a culture of accountability, safety, and customer focus.
- Develop succession planning and leadership bench strength.
6. Strategic Growth & Innovation
- Evaluate new testing technologies (EV battery abuse testing, hydrogen systems, autonomous systems validation).
- Expand lab capabilities in alignment with electrification and advanced mobility trends.
- Support digital transformation initiatives (LIMS, automation, data analytics).
Qualifications
Education
- Bachelor’s degree in Engineering (Mechanical, Electrical, Automotive, or related field required)
- MBA preferred
Experience
- 10+ years in TIC, automotive testing, aerospace testing, or related technical services
- 5+ years in senior leadership or GM-level responsibility
- Demonstrated P&L management experience
- Strong knowledge of mobility regulatory frameworks and certification pathways
Ready to lead quality on projects that actually matter?
A1 Management & Inspection (A1MI) is a growing, family-run quality firm supporting complex rail, transit, and public works infrastructure across Southern California. We’re looking for a Construction Quality Manager who wants real ownership, technical influence, and the chance to help shape how quality is delivered on major programs.
This is not a checkbox role. This is leadership..
What You'll DO
- Lead and implement Project Quality Management Plans (QMP / PQPM)
- Oversee Inspection & Test Plans (ITPs) and field quality activities
- Manage NCRs, root cause analysis, and corrective actions
- Interface directly with Owners, Engineers, contractors, and agencies
- Support audits, compliance reviews, and project closeout.
What We’re Looking For
- Bachelor’s degree (Construction Management, Engineering, or related)
- 10+ years in construction quality, including 3+ years as a Quality Manager
- Heavy civil experience (rail, structures, tunnels, trackwork, traction power, or public works)
- Strong communication and leadership skills
Preferred: Licensed Professional Engineer (PE)
- (Equivalent experience and ASQ certifications may substitute for formal education.)
Compensation & Benefits
- $150,000 – $200,000 base salary
- Top end reserved for PE-licensed candidates
- Healthcare, 401(k), PTO
- Car allowance (project-dependent)
Why A1MI?
- Family-style company where your voice matters
- Work on high-impact infrastructure projects
- We invest in your growth:
- ASQ certifications supported
- EIT → PE advancement encouraged and supported
- Build processes, not just follow them
