Consign Example Sentence Jobs in Usa
156 positions found — Page 5
$5000 New Employee Bonus
Center Medical Specialist
Seeking LVN / LPN, or RN for Plasma Donation Center!
NOTE: Salary is based on licensure and experience
Are you looking for something different? Did you know that your skill set/experience makes you a valuable candidate for a Center Medical Specialist position in one of our plasma donation centers? Grifols prides itself on its family-like culture. Our company has more than tripled its workforce in the last 10 years — we’re growing, and you can grow with us! For more information visit: ’s In It for You
- Competitive Pay
- Career Growth/Promotions
- Geographic mobility among our more than 300 donation centers
- No Third Shift
- Incredible Comprehensive Benefits Package Including: Medical, Dental, Vision, up to 5% 401K match, Tuition Reimbursement, PTO, Holiday Pay, Opportunity to participate in Company Bonus Program
About the Job
- Perform physical examination and establish medical history to determine donor suitability
- Build rapport with donors to ensure overall customer satisfaction
- Ensure donor and staff confidentiality
- Responsible for donor awareness to potential hazards
- Provide donor education regarding general health and provide counseling regarding unacceptable test results
- Evaluate & manage donor injuries and adverse events
- Perform evaluations of any history of illness or medications to ensure continued donor suitability
- Assist in employee training
- Administer employee Hepatitis Vaccine program
Job Requirements
Educated and currently certified/licensed in the state of employment and according to state requirements as a Registered Nurse, Licensed Practical Nurse, Licensed Vocation Nurse. HS diploma or GED. Current CPR certification required.
Attributes:
-Work is performed both standing and sitting for up to 2 to 4 hours per day each.
-The position does require bending and twisting of neck up from 1 to 2 hours per day.
-Frequent hand movement of both hands with the ability to make fast, simple, movements of the fingers, hands, and wrists.
-Ability to make precise coordinated movements, of the fingers to grasp and manipulate objects.
- Frequent foot movement; may squat, crouch or sit on one's heels on rare occasion. Occasionally walks, bends and twists at waist.
-Light lifting of 15lbs. with a maximum lift of 50lbs. May reach below shoulder height. Hearing acuity essential.
-Color perception/discrimination, near vision and far vision correctable in one eye to 20/30 and to 20/100 in the other eye.
-Able to communicate information and ideas so others will understand; with the ability to listen to and understand information and ideas presented through spoken words and sentences.
-Works independently and within guidance of oral or written instructions.
-Performs a wide range of tasks as dictated by variable demands and changing conditions.
-Relates sensitive information to diverse groups. Work is performed in a plasma center.
-Exposure to biological fluids with potential exposure to infectious organisms.
-Exposure to electrical office and laboratory equipment.
-Exposure to extreme cold below 32 degrees F while performing functions in plasma freezers. Personal protective equipment required such as protective eyewear, garments, gloves and cold-gear.
#biomatusa
#app
Third Party Agency and Recruiter Notice:
Agencies that present a candidate to Grifols must have an active, nonexpired, Grifols Agency Master Services Agreement with the Grifols Talent Acquisition Department. Additionally, agencies may only submit candidates to positions that they have been engaged to work on by a Grifols Recruiter. All resumes must be sent to a Grifols Recruiter under these terms or they will be considered a Grifols candidate.
Location: 1223 6th Avenue Des Moines, IA 50314
Learn more about Grifols
Center Medical Specialist
Seeking RN for Plasma Donation Center!
NOTE: Salary is based on licensure and experience
Are you looking for something different? Did you know that your skill set/experience makes you a valuable candidate for a Center Medical Specialist position in one of our plasma donation centers? Grifols prides itself on its family-like culture. Our company has more than tripled its workforce in the last 10 years — we’re growing, and you can grow with us! For more information visit: ’s In It for You
- Competitive Pay
- Career Growth/Promotions
- Geographic mobility among our more than 300 donation centers
- No Third Shift
- Incredible Comprehensive Benefits Package Including: Medical, Dental, Vision, up to 5% 401K match, Tuition Reimbursement, PTO, Holiday Pay, Opportunity to participate in Company Bonus Program
About the Job
- Perform physical examination and establish medical history to determine donor suitability
- Build rapport with donors to ensure overall customer satisfaction
- Ensure donor and staff confidentiality
- Responsible for donor awareness to potential hazards
- Provide donor education regarding general health and provide counseling regarding unacceptable test results
- Evaluate & manage donor injuries and adverse events
- Perform evaluations of any history of illness or medications to ensure continued donor suitability
- Assist in employee training
- Administer employee Hepatitis Vaccine program
Job Requirements
Educated and currently certified/licensed in the state of employment and according to state requirements as a Registered Nurse, Licensed Practical Nurse, Licensed Vocation Nurse, Paramedic, or EMT. Current CPR certification required.
Attributes:
-Work is performed both standing and sitting for up to 2 to 4 hours per day each.
-The position does require bending and twisting of neck up from 1 to 2 hours per day.
-Frequent hand movement of both hands with the ability to make fast, simple, movements of the fingers, hands, and wrists.
-Ability to make precise coordinated movements, of the fingers to grasp and manipulate objects.
- Frequent foot movement; may squat, crouch or sit on one's heels on rare occasion. Occasionally walks, bends and twists at waist.
-Light lifting of 15lbs. with a maximum lift of 50lbs. May reach below shoulder height. Hearing acuity essential.
-Color perception/discrimination, near vision and far vision correctable in one eye to 20/30 and to 20/100 in the other eye.
-Able to communicate information and ideas so others will understand; with the ability to listen to and understand information and ideas presented through spoken words and sentences.
-Works independently and within guidance of oral or written instructions.
-Performs a wide range of tasks as dictated by variable demands and changing conditions.
-Relates sensitive information to diverse groups. Work is performed in a plasma center.
-Exposure to biological fluids with potential exposure to infectious organisms.
-Exposure to electrical office and laboratory equipment.
-Exposure to extreme cold below 32 degrees F while performing functions in plasma freezers. Personal protective equipment required such as protective eyewear, garments, gloves and cold-gear.
#biomat
#app
Third Party Agency and Recruiter Notice:
Agencies that present a candidate to Grifols must have an active, nonexpired, Grifols Agency Master Services Agreement with the Grifols Talent Acquisition Department. Additionally, agencies may only submit candidates to positions that they have been engaged to work on by a Grifols Recruiter. All resumes must be sent to a Grifols Recruiter under these terms or they will be considered a Grifols candidate.
Grifols provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability. We will consider for employment all qualified applicants in a manner consistent with the requirements of all applicable laws.
Location: NORTH AMERICA : USA : PA-Lancaster:[[cust_building]]
Learn more about Grifols
Primary responsibilities include planning and executing events, with an emphasis on contributing to the overall creative, technical and logistical elements that help an event succeed (event design, build strategies, audiovisual production, networking, logistics, partner sourcing, partner management, asset management, budgeting, negotiation, and client service). The Event Manager will spend the majority of their time managing all aspects of the event production process, working as part of the team from event concept, to implementation, live show, to load out. The Event Manager should work effectively with both client and internal teams to flawlessly deliver event programs that drive client results against established strategic objectives, timelines and financial goals. The Event Manager should thrive under pressure, enjoy travel, and have a passion for event production and logistics.
Responsibilities Include:
• Contribute resources to proactively ensure high quality service delivery while striving for continuous improvement.
• Responsible for following department protocols for event planning
• Follow project plan for each portion of implementation and holding external partners accountable
• Work with the Raiola internal team and external vendors in ensuring that all logistical needs for the event are understood and met.
• Identify necessary vendor / partner support, and then source and manage accordingly
• Liaise with audio-visual partners with sourcing all needs and ensuring that they are appropriately incorporated into the overall event
• Assist with payments and processing
• Onsite point of contact for all aspects of production
• Utilize strong internal partnership skills while working cross-functionally with the team in order to ensure that the project is implemented with internal stakeholders as required, and that client vision and satisfaction is met
• Exhibit exceptional written and verbal communication skills with superb attention to detail
• Oversee the project budget, keeping track of expenses and updating the team on costs so that they can be communicated to the client as needed
• Ongoing reconciliation of all project expenses, including ensuring vendor invoices are accurate and paid, and client invoices reflect all approved event expenses
• Provide solutions for visual and spoken client presentation needs occasionally under high-pressure circumstances.
• Provide immediate response to requests for assistance on events in progress.
• All other duties as assigned.
Skills + Personal Qualities:
● Great communication skills, written and verbal
● Team player
● Sense of humor
● Enjoys life and sees the beauty in helping others
● Must be comfortable in a small office, open plan setting
● Experience managing and directing corporate special events
● Working with budgets with multiple levels
● Demonstrate a high level of knowledge in large-scale corporate special events and productions
● Educated on the latest event technologies, with the ability to weave these in to event experience seamlessly
● Experience in managing labor crews
● Strong production competencies
● Well-developed project management skills
● Eye for detail and maniacal attention to delivering high quality, error-free deliverables
● Anticipates project needs and proactively delivers
● Builds solid and reciprocal relationships with designated client contacts and vendors
● Fosters trust and open/honest communication with the internal team and partners
● Gathers and analyzes program data to identify opportunities and make recommendations on strategy
● Knowledge of Microsoft Office products including Outlook, Microsoft Office and Keynote
● Ability to meet tight deadlines and work well under pressure.
● Strong organizational skills, time management skills and attention to detail required.
● Strong verbal and written communication skills.
● Ability to prioritize and manage multiple tasks/projects.
● Ability to work independently without supervision, be self-directed and demonstrate initiative.
● Ability to take direction without follow up.
● Ability to work collaboratively with others for whom you have no direct supervisory authority.
● Strong teamwork and team synergy skills required.
● Exhibit good judgment and decision-making skills.
● Availability and willingness to work extended hours, including nights, weekends, holidays and be on-call as necessary.
PHYSICAL REQUIREMENTS
• Capability to stand, kneel and/or crouch for long periods of time
• Capability to work in hot humid environments
• Capability to work in cold environments
• Capability to lift & move excess of 60lbs as is necessary in the normal flow of the day to day work load unassisted and lift and move 100lbs with assistance.
• Assist in the loading of various vehicles with equipment.
Please submit a cover letter, portfolio, and resume to Cover letter should include a few sentences about a life experience that demonstrates your ability to manage your time while helping others simultaneously. Salary range $68,000- $75,000 per year plus benefits.
Controls & Integration Engineer III, Electrical
Location:
Jessup, MD
Job Id:
914
# of Openings:
2
TITLE: Controls & Integration Engineer III, Electrical
LOCATION: Jessup, MD
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Generate design documents for SCADA/Automation projects
- Develop design document narratives
- Perform requirements analysis
- Generate Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in electrical engineering and 5-7 years field experience
- Associate degree in the electrical field and 10 years field experience
- High school diploma and 15 years field experience
- 5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
- Experience in reading electrical and control schematics
- Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
- Experience in testing and troubleshooting control and protection systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
- Must be a US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We Utilize E-verify
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Controls & Integration Engineer III
Location:
Jessup, MD
Job Id:
789
# of Openings:
1
TITLE: CONTROLS & INTEGRATION ENGINEER V
LOCATION: JESSUP, MD
*Salary Negotiable
POSITION SUMMARY:
Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including industrial controls and power controls and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customer's complex needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
Design / Engineering
- Initiates design documents for small projects and in support of large programs
- Develops design documents narratives
- Performs requirements analysis
- Develops Sequence of Operations / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Develops Specifications
- Performs QA/QC and technical reviews of designs
- Plans and Design Procedures and Equipment for Integrated Systems Factory Testing
- Comment Resolution
Mechanical-focused controls engineer (BAS/BMS)
- Experience on EPMS monitoring
- Certifications in Platforms (at least one), familiarity with any others preferred: Ignition, Aveva, Automated Logic, Siemens, Schneider EBO, Niagara N4, Iconics Gen64
- Experience with Federal Government controls projects (ICS/EMCS/UMCS) preferred
- Familiarity with Cisco network switch programming and design preferred
Programming
- Lead programming / configuration team efforts for complex automation and SCADA applications.
- Program / Configure / troubleshoot PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Author testing / commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
Estimates
- Conducts any surveys, inspections, tours, etc. of client sites, as required
- Prepares cost estimates and supporting documents for small projects
- Perform hardware / software upgrades and replacements on existing systems
- Evaluation and pricing of change orders
Personnel Management
- Assigns technical tasks and coordinates with entry-level engineers
- Assigns tasks and coordinates with Technical Staff
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Experience in reading electrical and control schematics and plans
- Experience in control system startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and machinist hand tools
- Experience using testing, calibration, or industry-specific tools and software
- 3-7 years' experience
- Bachelor's degree in engineering or higher
- Associate degree (add 3 years)
- High school diploma (add 5 years)
- Must be a US Citizen
Computer Skills:
- Experience in computer networks
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software
- Standard Office Software (Microsoft Word, Excel, etc.)
Certificates and Licenses:
* Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
* Preferred Licenses / Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, etc.
- Certification in one or more SCADA platform, such as: Iconics, Ignition, etc.
- Design Build Institute of America (DBIA)
- Engineer in Training (EIT) in relevant in field
Supervisory Responsibilities:
* No supervisory responsibilities
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
CPG Participates in E-Verify
Learn more about CPG by checking out our website here
#LI-TG1
Pay Range: $98,891 - $148,392 per year
Apply for this Position
Controls & Integration Engineer II, Electrical
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
921
# of Openings:
1
TITLE: Controls & Integration Engineer II, Electrical
LOCATION: Ashburn, VA
POSITION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include power chain monitoring and control systems in Data Centers and /or mission critical environments. Experience in Electrical Power Monitoring Systems (EPMS) and field device configuration such as gateways, PLC, Meters, Relays, and SCADA/HMI software. Experience in Building Automation Systems (BAS) and configuration/programming of field controllers is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Assists Senior Engineers in design documents for SCADA/Automation projects
- Developing design document narratives
- Perform requirements analysis
- Understanding of Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field Testing
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
- Associate degree in the electrical or mechanical field (add 3 years field experience)
- High school diploma (add 5 years field experience)
- 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
- Experience in reading electrical and control schematics
- Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
- Experience in testing and troubleshooting control and protection systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
- MUST BE A US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
* We Utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
At Rite-Hite, your work makes an impact. As the global leader in loading dock and door equipment, we design and deliver solutions that keep our customers safe, secure, and productive. Here, you'll find innovation, stability, and the chance to grow your career as part of a team that's always looking ahead.
PURPOSE AND SCOPE
This position isresponsibleassembling mechanical, hydraulic and electrical components to customer supplied specifications.
This position isrequiredto follow established safety procedures in and around the production area, tocomprehendand conform toestablishedquality guidelines, and todemonstrategood housekeeping skills in the work area and on the production floor.
ESSENTIAL DUTIES AND RESPONSIBILITIES
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The incumbent maybe responsible forother specific and essential duties and responsibilities with respect to each of the skills set regardless of certification status.
Operate small hand tools such as power screwdrivers, overheadcrane, banding and testing equipment, airtoolsand hammers in a safe, prescribed manner.
Meet the set daily production rate for the department.
Read and complete necessary forms and documentation including work orders, inspectionsheetsand log sheets.
Properly set up,assemblyall current models and standard options in compliance with product specifications to ensure customer satisfaction.
Sets upcomponentparts in a secure position using bolts,clampsor tack welds.
Follow established quality,safetyand production procedures.
Locate and retrieveappropriate productionmaterials as required.
Assemble products to engineeringspecificationwith the highest level of quality.
Make suggestions for improvementtoproducts and processes.
Participate in Lean Manufacturing events including Kaizen events, 5S activities and other training.
EDUCATION and/or EXPERIENCE
High school diploma or general education degree (GED); and at least three months related experience and/or training; or equivalent combination of education and experience.Ability to read andutilizea tape measure.Ability to complete paperwork as required.Ability to read and understand prints in relation to part size anddimensionsand specifications.Ability toutilizecomputersystemneeded toidentifycomponentlocation
LANGUAGE SKILLS
Ability to read a limited number of two-and three-syllable words and to recognize similarities and differences between wordsand betweenseries of numbers.Ability to print and speak simple sentences.
MATHEMATICAL SKILLS
Ability to add,subtracts, multiply, anddividesin all units of measure, using whole numbers, commonfractionsand decimals.
PHYSICAL DEMANDS
While performing the duties of this job, the employeeis regularly required tostand;use hands to finger,handleorfeel;talk or hear. The employeefrequentlyis required towalk and reach with hands and arms. The employeeis occasionally required tostoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles.The employee is occasionally exposed to toxic or caustic chemicals and outside weather conditions. The noise level in the work environment is usually loud.Personal Protective Equipment (PPE) isrequired.
What We Offer
At Rite-Hite, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work:
Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more.
Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing.
Time for You: Paid holidays, vacation time, and personal/sick days each year.
Join us and build a career where you're supported - at work and beyond.
Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans.We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.
Salary range:
The UC academic salary scales set the minimum pay at appointment. See the following table for the current salary scale for these positions: . The current full-time salary range for these positions is $70,977 - $199,722.
Percent time:
Generally part-time; 5 - 100%
Anticipated start:
Spring 2026 or later
Review timeline:
Completed applications will be reviewed when openings arise. Appointments for the upcoming spring semester are usually reviewed between July and October and for the upcoming fall semester in February and June.
Position duration:
Positions may be for one semester or for the full academic year, with the possibility of renewal. Appointments may be renewed based on need, funding, and performance.
Application Window
Open date: July 11, 2025
Most recent review date: Friday, Jul 25, 2025 at 11:59pm (Pacific Time)
Applications received after this date will be reviewed by the search committee if the position has not yet been filled.
Final date: Saturday, Jul 11, 2026 at 11:59pm (Pacific Time)
Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.
Position description
Berkeley Law is generating an applicant pool of qualified instructors should openings arise.
Berkeley Law is one of the premier law schools in the United States. Our programs are demanding, engaging, hands-on, and selective. As with all our faculty, we expect our lecturers to demonstrate a strong commitment to academic rigor and intellectual diversity.
Berkeley Law strives to educate responsible, effective, and forward-thinking advocates who serve the public through legal practice, public policy, academic scholarship, and related fields. In doing so, the school addresses some of society's most pressing challenges by leveraging its strengths in teaching and research to improve law, policy, and public institutions. At the heart of Berkeley Law's public mission is a commitment to access, affordability, and empowering students from all backgrounds to pursue impactful careers across a wide range of professional paths.
The J.D. and LL.M. programs host a diverse and constantly evolving curriculum. Hundreds of courses are offered, including dozens in our top-ranked Law and Technology, Business Law, International Law, Environmental Law, and Social Justice programs.
This pool encompasses courses on criminal law, criminal procedure investigations and adjudication, white-collar crime, the nexus of criminal and immigration law enforcement ("crimmigration"), youth justice, post-conviction remedies, capital punishment, prisons and parole, sentencing, criminal justice theory and policy, and other courses on major and emerging criminal law practice and policy areas.
Instructors for lecture courses are appointed in the Lecturer title; instructors for experiential center courses are appointed to the Field Work Supervisor title. The applicant selected will have important teaching responsibilities, including preparing course materials (such as the syllabus) and maintaining a course website, and will also be expected to hold office hours, assess and offer feedback on student work, assign grades, and advise students.
UC Lecturers and Field Work Supervisors are academic appointees in an organized bargaining unit and are exclusively represented by the American Federation of Teachers - Unit 18.
School:
Curricular Details:
Public Mission: public-mission/
Qualifications
Basic qualifications (required at time of application)
* Bachelor's degree, or equivalent international degree, is required at the time of application.
Additional qualifications (required at time of start)
* J.D., Ph.D., M.B.A., LL.M. or Master's degree, or equivalent international degree, and a minimum of three years of professional experience in either legal practice, judicial clerkship, or law school teaching, in the United States, or
* Bachelor's degree and a minimum of six years professional experience in either legal practice, judicial clerkship, or law school teaching, in the United States.
* Availability to teach in-person during required law school class times.
Preferred qualifications
* Experience teaching courses in a United States law school, with outstanding student valuations; and/or
* Five or more years of legal practice experience in the United States or another jurisdiction, in the area of criminal law.
Application Requirements
Document requirements
Teaching evaluations and/or other materials or information may be requested of top candidates.
Curriculum Vitae - Your most recently updated C.V.
Statement of Teaching - Please address the following questions related to your potential teaching at Berkeley Law. Please limit your response to 300 words.
-- Please discuss your competencies and experiences relevant to successful instruction for law school courses, including your prior law teaching experiences, teaching approach, and future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy. We also welcome information about other aspects of your professional experience as it is specifically relevant to teaching at Berkeley Law.
Reference requirements
- 2 required (contact information only)
Apply link:
JPF04938
Help contact:
About UC Berkeley
UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.
The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.
For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.
In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.
As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.
Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.
As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.
- "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
- UC Sexual Violence and Sexual Harassment Policy
- UC Anti-Discrimination Policy
- APM - 035: Affirmative Action and Nondiscrimination in Employment
Job location
Berkeley, CA
Controls & Integration Engineer I, Mechanical
Location:
Remote
Job Id:
917
# of Openings:
1
TITLE: Controls & Integration Engineer I, Mechanical
LOCATION: Dallas, TX
POTISION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs.
Specific areas of expertise for this position include monitoring and control systems in Data Centers and /or mission critical environments. Experience in Building Automation Systems (BASS) and field device configuration such as field level controllers, PLCs, protocol converters, and SCADA/HMI software. Experience in Electrical Power Monitoring Systems (EPMS) and configuration/programming of electrical gear interfaces is beneficial.
ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Technical Responsibilities
- Design / Engineering
- Assists Senior Engineers in design documents for SCADA/Automation projects
- Developing design document narratives
- Perform requirements analysis
- Understanding of Sequence of Operations (SOO) / System Functional Documentation
- Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
- Comment Resolution
- Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
- Review design document narratives
- Perform execution and design scope gap analysis
- Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
- Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
- Assist in reviewing project specifications
- Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
- Programming
- Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
- Testing / Troubleshooting / Deployment / Commissioning
- Assist senior engineers in creating and updating testing and commissioning procedures
- Preparation of test reports
- Originates test procedures
- Commissioning of deployed systems
- Development of test equipment and simulation devices
- Perform Factory and Field TestingMaintenance
- Maintenance
- Perform troubleshooting on service calls to existing and legacy system operators
- Perform hardware / software upgrades and replacements on existing systems
Managerial Responsibilities
- Estimates
- Assists senior engineers in preparation of cost estimates and supporting documentation
- Work with relevant stakeholders to review scope of project
- Conduct any surveys, inspections, tours, etc. of client sites, as required
- Assists senior engineers in evaluation and pricing of change orders from vendors
- Personnel Management
- Assigns tasks and coordinates with Technical Staff
- Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience:
- Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience
- Associate degree in the electrical or mechanical field (add 3 years field experience)
- High school diploma (add 5 years field experience)
- 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing
- Experience in reading mechanical and control schematics
- Experience in building automation systems (BAS) startup, configuration, and calibration
- Experience in testing and troubleshooting control systems
- Experience using basic electrical and hand tools
- Experience using testing, calibration, or industry-specific tools and software
- Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
- Experience with test equipment and test equipment software
- Experience with networking design, configuration, and troubleshooting
- Experience with air handlers, chiller plant systems and data center CRAC units
- Ability to travel up to 80%
- MUST BE A US CITIZEN
Computer/Networking Skills:
- Experience in OT and IT networking technologies and topologies
- Experience troubleshooting and diagnosing OT and IT networks and protocols
- Experience in CAD/CAE Software (Visio, AutoCAD)
- Experience in schedule management software (Project, Primavera P6)
- Standard Office Software (Microsoft Word, Excel, Access etc.)
Certificates and Licenses:
- Required Certifications
- Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc.
- Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
- Preferred Licenses / Certifications
- Design Build Institute of America (DBIA)
- Certified SCADA Security Architect (CSSA)
- Certified Automation Professional (CAP)
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
*We utilize E-Verify
#LI-TG1
Pay Range: $85,996 - $129,050 per year
Apply for this Position
Controls Project Manager II
Location:
19775 Belmont Executive Plaza
Suite 200
Ashburn, VA
Job Id:
937
# of Openings:
1
TITLE: CONTROLS PROJECT MANAGER II
LOCATION:
POSITION SUMMMARY:
The Controls Project Manager II is responsible for assisting an OTS Director in organizing our ongoing projects. This role involves monitoring project plans, schedules, work hours, budgets, and expenditures and ensuring that project deadlines are met on time. The Controls Project Manager II will assist with processes, procedures, management, and documentation needed for CPG's multiple data center infrastructure services.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Maintaining and monitoring project plans, project schedules, work hours, budgets, and expenditures.
* Documenting and following up on important actions and decisions from meetings.
* Preparing necessary presentation materials for meetings.
* Ensuring project deadlines are met.
* Determining project changes.
* Providing administrative support as needed.
* Undertaking project tasks as required.
* Developing project strategies.
* Ensuring projects adhere to frameworks and all documentation is maintained appropriately for each project.
* Assess project risks and issues and provide solutions where applicable.
* Chair and facilitate meetings where appropriate and distribute minutes to all project team members.
* Create a project management calendar for fulfilling each goal and objective.
* On-site project management as necessary, including but not limited to QA/QC checks on projects, deliverable inventory management, and safety protocol validation.
* MUST BE A US CITIZEN
Managerial Responsibilities
* Estimates
o Leads proposal efforts (Research / Cost Estimates / Proposal Documents) for medium to large projects
o Works with relevant stakeholders to review scope of project
o Conducts any surveys, inspections, tours, etc. of client sites, as required
o Prepares cost estimates and supporting documents for small projects
o Evaluation and pricing of change orders
* Divisional Management
o Actively follows emerging technical trends and contributes to Division leadership and guidance in area of practice
* Personnel Management
o Assigns technical tasks to engineers and administrative staff in support of projects
o Assigns technical tasks and coordinates with entry-level engineers
o Assigns tasks and coordinates with Technical Staff
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education/Experience (Desired):
* Bachelor's degree in engineering preferred
* 5 - 10 years
* Associate degree (add 3 years)
* High school diploma (add 5 years)
* Experience in reading electrical, telecommunications and control schematics and plans
* Experience in overseeing control system startup, configuration, and calibration
* Experience in testing and troubleshooting control systems
Computer Skills:
* Competency in Microsoft Office applications, including Word, Excel, and Outlook.
* Experience in Project Management Software (Project)
* Experience in CAD/CAE Software (Visio, AutoCAD)
Certificates and Licenses (Preferred):
* PMP Certification
Supervisory Responsibilities:
* No supervisory responsibilities with this position.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* Exposure to computer screens for an extended period of time, Occasionally, lift and/or move 10 to 15 pounds. Frequently required to sit, stand, walk, stoop, kneel, crouch or crawl; occasionally required to climb or balance. Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust and focus. Reach by extending hands or arms in any direction, finger dexterity, listen and understand information and ideas presented through spoken words and sentences. Communicate information and ideas in speaking so other will understand. Read and understand information and ideas presented in writing. Apply general rules to specific problems to produce answers that make sense.
*Salary Negotiable*
The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.
Benefits to Joining Our Team
CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage
- Health Benefits - (Medical, Dental & Vision Insurance)
- Flexible Spending Account Options
- 401K Plan
- Employer paid Life & Disability Insurance
- Paid Time Off
- Employee Referral Program
- Employee Assistance Program (EAP)
CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
Learn more about CPG by checking out our website here
#LI-TG1
CPG Participates in E-Verify
Pay Range: $98,891 - $148,392 per year
Apply for this Position
