Bush Remote Control Instructions Jobs in Usa

NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.

Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.

If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .

AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.

Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.

Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).

GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.

You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.

Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.

Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.

The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.

Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.

Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.

Locations are offered based on the current needs of the service at that time.

Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.

Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.

Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.

Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.

Collecting, refining, and analyzing strategic and tactical intelligence.

Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.

See the U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.

You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.

Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.

Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.

Highly skilled in writing comprehensive arrest, criminal and incident reports.

Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.

Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.

OR GS-11 Education Substitution for experience: A Ph.D.

or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.

OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.

This will be calculated using your resume and unofficial transcripts submitted with your application.

AND U.S.

Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.

Your copies must include the expiration and capacity pages of your MMC.

Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.

It cannot be pending additional information for MMLD application process.

You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.

NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.

Please see the "Required Documents" section below for additional resume requirements.

Other Requirements Citizenship : You must be a U.S.

Citizen to apply for this position.

Residency : You must have had primary U.S.

residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.

Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.

The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d), or creditable service covered by Title 5 U.S.C.

8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.

This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.

8336(c) or Title 5 U.S.C.

8412(d).

Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.

Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.

3312.

You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training : This position has a training requirement.

You may be required to successfully complete the training requirement as a condition of employment.

Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply Click the Apply button on this site.

You will be linked to the CBP Talent Network registration page.

For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.

You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.

Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

The City of Clemson provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Under general supervision, performs a variety of semi-skilled and skilled tasks in the preventative maintenance, repair and improvement of City buildings and grounds, using a variety of machines, tools and equipment. Work may involve supervising a small crew of workers in the maintenance and improvement of City buildings and grounds. Reports to the Urban Forester/Horticulturist.

ESSENTIAL JOB FUNCTIONS

Assembles tools, equipment, and materials and performs specific work tasks on city-owned grounds.

Receives written work orders or verbal instructions from supervisor.

including the ability to perform proper pruning techniques on trees and shrubs in accordance with

ANSI standards.

Carries out the seeding, fertilizing, top dressing, soil conditioning, watering, pest and weed control of parks and open spaces.

in accordance with the Department of Pesticide Regulation. Maintains application records.

Installs and maintains benches, picnic tables, signs and other amenities in parks and beautification areas.

Constructs decorative flower garden borders from wood, bricks and concrete using hand tools.

Repairs and paints benches and assists in repair of roads, walks, buildings, and mechanical equipment, using hand tools.

irrigation repair and installation and light equipment repair and upkeep. Assist Horticulturist as the site manager of the Community Garden. Plants and maintains the "Vandals Plot". Tills garden plots as needed. Maintains Garden Shed and supplies. Maintains Community Garden grounds. Assists with setting up programs and activities for the gardeners. Communicates with gardeners about issues and monitors activities to ensure that guidelines are adhered to.

using hand tools.

installation, irrigation, brush cutting/bush hogging rite of ways and detention ponds.

Requires a high school diploma or GED equivalent with two years of experience in building and grounds maintenance and repair work; or any equivalent of training and experience which provides the required skills, knowledge and abilities. Must have a valid South Carolina driver's license or the ability to obtain one. Pesticide or Herbicide applicator's license desirable.

Applications accepted online at Applications accepted until 3/23/2026. The City of Clemson provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

The City of Clemson is an equal opportunity employer.

• Routine blueprint reading and technical writing to accomplish work tasks.
• Daily use of tools such as micrometers, height gauges, Vernier calipers, and dividing heads to support tasking.
• Operate machine tools in varying tolerances according to need (from thousands upwards).
• Non routine maintenance and repair the portable machines tools.
• Routine use of hoisting and rigging equipment for heavy pieces such as forklifts and chain falls
• Responsible for system tolerance determination and application.
• Daily tasking will involve work on the following:
  • Rudders and Steering systems to include blue checking and fitting, piano wire alignment method, stock straightness determination, hydraulic and pneumatic controls.
  • Bearings and Bushings to include lubrication types and methods, piano wire fit and alignment method, dial indicator alignment.
  • Engines, Motors, and Generators: diesel engines, gas or steam turbines, generators, motors, reduction gears, clutches, PTO's, mount arrangements, systems flushing, heat exchanger (shell/tube and plate/frame), heat exchanger and systems leak testing.
  • Propulsion Shafting to include: CPP shafting, hydraulic couplings, clearance (water bearings), wear downs (oil bearings), Piano wire alignment method, dial indicator alignment, FRP spark test, bearing contact determination, shaft straightness (run out) determination.
  • Seals to include gaskets, packing, and \"O\"-rings, lips & labyrinth, mechanical, tightness testing.
  • Valve work: leak testing, seat types, packing/gasketing/lubrication, lapping, seat types (materials and types).
  • Propellers to include Keyed, Tapered, Flanged & Key fits- Solid and Built, CPP Systems, Polishing.
  • K. Pumps to include Valving (internal & external), Bearing & Sealing arrangements, Alignment (dial indicator & laser).
  • Deck machinery: gear boxes, bearings/seal arrangements, alignments, drivers (electric, mechanical, or hydraulic), sheaves, cables, turrets, booms
• Instruct lower classes of machinists, manage work/personnel assignments and the requisition of job materials.
• Upholding a safe work environment is key daily tasks require safe handling/use/storage of gasses; safe work practices; PPE; tank safe opening practices; lock-out/tag-out; confined space practices; respirator/harness fit; oil spill response.
  

• Must have a high school diploma or equivalent and at least seven (7) years of experience as a Machinist.
• Must have experience with manual lathes and mills.
• Must be able to read and comprehend blueprints, drawings and other technical trade related documents
• Must have adept mechanical ability, manual dexterity, and hand/eye coordination required to perform various projects, per drawings, sketches, and verbal or written instructions.
• Must have clean driving record.
  

• Technical training preferred.
  

• Position requires you to gain and maintain access to government and military installations, often requiring completion of stringent background checks and screenings.
• May require the ability to obtain and maintain appropriate level of security clearance depending on the contract.
• Must be able to provide proper documentation as needed to process access/clearance (e.g. birth certificate, identification card, etc.).
  

• Frequent Travel; 50% or less.
• International travel required on a nonstandard routine.
  

• Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
• Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
• May ride ships at sea for extended periods
• Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.
• Frequent exposure to noise due to machinery and equipment.
• Employee is required to operate trucks, forklifts & man-lifts.
• While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
• Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
• Frequent use of respirator.
• Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.
  

Position Summary

We are seeking a highly skilled and detail-oriented Electro Mechanical Assembly Technician to join our manufacturing team. The ideal candidate will have experience assembling complex, multi-faceted assemblies and sub-assemblies in a structured production environment. This role requires strong mechanical aptitude, a deep understanding of assembly hardware and consumables, and a commitment to quality and process control.

Attention to detail, adherence to quality standards, and the ability to work from engineering drawings and work instructions are critical for success in this position.

Key Responsibilities

• Assemble complex mechanical assemblies and sub-assemblies according to engineering drawings, work instructions, and specifications
• Interpret blueprints, BOMs, and assembly documentation
• Verify correct materials, hardware, and components prior to assembly
• Use hand tools, power tools, torque tools, pneumatic tools, and specialty fixtures appropriately
• Install various hardware types including fasteners, rivets, threaded inserts, pins, bushings, fittings, and mechanical components
• Apply proper assembly consumables (adhesives, sealants, thread lockers, lubricants, etc.) per specifications
• Perform in-process inspections and verify dimensional and visual quality requirements
• Maintain traceability and material verification in accordance with quality system requirements
• Document assembly steps and record required production data accurately
• Identify and escalate quality issues or discrepancies
• Maintain a clean, organized, and safe work environment
• Support continuous improvement initiatives within the production process

Required Qualifications

• 2+ years experience in mechanical assembly (manufacturing environment preferred)
• Experience with complex, multi-component assemblies and sub-assemblies
• Strong understanding of mechanical hardware types and proper installation methods
• Knowledge of assembly tools including torque wrenches, drills, presses, and precision measuring tools
• Familiarity with assembly consumables and proper application techniques
• Ability to read and interpret engineering drawings and technical documentation
• Experience working within a quality management system
• Strong attention to detail and commitment to producing high-quality work
• Ability to verify materials and components against documentation
• High mechanical aptitude

Preferred Qualifications

• Experience in aerospace, industrial equipment, or precision manufacturing
• Familiarity with AS9100, ISO 9001, or similar quality systems
• Experience with material traceability and inspection documentation
• Ability to perform basic quality inspections using calipers, micrometers, and gauges
• Experience working with ERP or manufacturing tracking systems

Key Competencies

• Detail-oriented and process-driven
• Quality-focused mindset
• Strong organizational skills
• Ability to work independently and as part of a team
• Strong problem-solving skills
• Dependable and accountable

Physical Requirements

• Ability to stand for extended periods
• Ability to lift up to 50 lbs
• Ability to use hand tools and perform repetitive tasks

Plan machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).

Manage stock inventory by checking stock to determine amount available; anticipating needed stock; placing and expediting orders for stock; verifying receipt of stock.

Program and operate CNC/Manual mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.

Set up CNC/Manual mills and lathes by installing and adjusting chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads.

Verify settings by measuring positions, first-run part, and sample workpieces.

Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.

Ensure safe operations by adhering to safety procedures and regulations.

Maintain equipment by completing preventive maintenance requirements; following manufacturer’s instructions; troubleshooting malfunctions.

Proficiency with software applications including CAD - CATIA preferred, Microsoft Excel, Word & PowerPoint.

CNC Programmer/Machinist Responsibilities:

Write and optimize CNC programs to create complex parts on 3 and 5 axis machining centers.

Design and fixture complicated setups on manual and CNC machines.

Calculate speeds and feeds for multiple materials.

Read and understand drawings.

Create and compile necessary documents to aid setting up machines.

Working knowledge of the following machines: Mill (manual and CNC), Lathe (manual and CNC), Saws.

Select tooling for specific applications.

Machine parts to print and/or other special requirements.

Utilize measurement equipment to qualify completed parts.

Requirements:

Minimum 5+ years experience writing CNC programs in a machining environment.

Demonstrates proficiency with CAD (CATIA), CAM software and G-code.

Experience with any CAD System, not limited to CATIA only: Mastercam, GibbsCam is acceptable.

Experience in using Vericut is a plus.

Proficient with GD&T.

Manual and CNC operator experience required.

Demonstrates strong time management skills with the ability to effectively coordinate multiple projects.

Experience writing post processors is a plus.

Knowledge of Microsoft Office Tools: Excel, Power Point

FUNCTIONAL PURPOSE:

Independently performs the full range of diagnostic, preventive maintenance, alignment and calibration, and overhaul tasks, on both hardware and software on a variety of mail processing, customer service, and building equipment and systems, applying advanced technical knowledge to solve complex problems.

DUTIES AND RESPONSIBILITIES:

• Performs complex testing, diagnosis, maintenance, alignments and calibration, overhaul, and revision, of electronically operated or controlled equipment or systems; may be required to perform maintenance of associated electromechanical equipment and systems.
• Observes the operation of systems and equipment, and applies various testing and diagnostic methods and procedures to locate and correct malfunctions and/or failures and ensures maximum system performance.
• Performs equipment inspections to assess the quality of service or maintenance received, and to discover incipient malfunctions; initiates work orders requesting corrective actions for equipment not meeting maintenance or operating standards; estimates time and materials necessary to make corrections and conducts investigations of frequent or serious equipment failures to determine the cause of the breakdown and to recommend remedial maintenance action.
• Recommends changes to servicing and preventive maintenance activities; assists in the revision of preventive maintenance and operator checklists, and their frequency to sustain the proper degree of maintenance.
• Performs analyses of equipment failures; reviews operational reports, audits, and other information, to determine where operational enhancement can be made to prevent equipment or systems deterioration.
• Participates in the installation, removal, modification, assembly, and/or disassembly of systems and equipment.
• Participates in classroom, on-the-job, and correspondence training programs; attends courses at postal facilities, trade schools, and manufacturers sites; assists in developing and implementing training programs; provides on-the-job training to other lower level maintenance employees.
• Provides technical support to other employees in the facility or in installations within the area served; performs in-process and final operational checks and tests work completed by other employees; may work without direct supervision.
• May drive a vehicle or use other appropriate modes of transportation in the course of assigned duties.
• Follows established safety practices and requirements while performing all duties; reads and adheres to instructions listed in applicable maintenance directives; maintains a library of maintenance directives.
• Performs other duties as assigned.

REQUIREMENTS:

• Ability to demonstrate mechanical comprehension to learn and apply mechanical principles, including a working knowledge of basic mechanical operations (such as levers and pulleys) and the application of physical laws (such as force and gravity). This includes knowledge in the following areas: (A) Power transmission--such as gears, sprockets and chains, belts and pulleys; (B) Power translation--such as cams and cam followers, linkages, springs; (C) Friction reduction'such as bushings, bearings; (D) Fasteners--such as screws, nuts and bolts, pins, rings, clips, couplings.

• Knowledge of basic electricity principles; this includes knowledge of Ohm's law, Kirchoff's law, AC-DC circuitry, relays, switches, and circuit breakers.

• Knowledge of the National Electrical Code may be required for employees in a skilled position. This also includes knowledge of techniques and procedures as used in electrical installations and maintenance (circuit protection, wiring, conduits, etc.).

• Knowledge of electronic principles; this includes knowledge of (A) basic logic gates, symbology, resistors, memory, encoders, decoders, etc.; (B) Hardware/components - such as solid state devices (diodes, transistors, etc.), coils, capacitors, etc.; (C) Digital circuit components - as in registers, adders, counters, memories, flip-flops, encoders, decoders, etc.; and D) AC and DC circuitry - as in circuit analysis, schematic interpretation, etc.

• Knowledge of and ability to follow safety and security procedures for performing maintenance work This includes knowledge of industrial hazards (e.g., mechanical, chemical, electrical, electronic) and procedures and techniques established to avoid injuries to self and others such as lock out devices, protective clothing, and waste disposal techniques.

• Knowledge of current computer technology to understand how technology may be applied to solve a problem or improve system design; this includes knowledge of hardware, software and networking technology/systems and integrated computer systems. This includes knowledge related to: (A) the Operation of computer terminals or other peripherals to enter, operate, and exit programs; to use the systems programs and (B) Retrieving and interpreting reports for diagnostic and information purposes.

• Ability to perform mathematical calculations such as addition, subtraction, multiplication, and division correctly; to solve practical problems by selecting from a variety of mathematical techniques such as formulas and percentages.

• Ability to remember material learned earlier refers to the ability to recall specific information and/or theoretical knowledge and apply it to mechanical, electrical, or electronic maintenance work such as inspection, troubleshooting, equipment repair and modification, preventive maintenance, and installation of electrical equipment.

• Ability to troubleshoot problems to analyze the root cause of a specific error and decide what action to take to prevent recurrence; to back track from a specific problem to identify the source of the error.

• Ability to think logically and critically; to understand the relevance of information; to identify relationships between information and data.

• Ability to think of possible causes for problems and find solutions; to choose the best course of action; to make a decision without delay when the opportunity arises or when all desired information is not available.

• Ability to learn and comprehend new or unfamiliar material; to use multiple approaches to grasp or learn the implication of new information; to quickly incorporate information and ideas.

• Ability to comprehend spatial relations as required to perform maintenance work; to form three-dimensional mental pictures of objects; to know what an object would look like when viewed from a different angle; to determine if something will fit in a specified area. This may include the ability to use technical drawings (e.g. diagrams, blueprints and schematics).

• Ability to read and comprehend job related written materials; this also includes the ability to locate, read, and comprehend text material such as handbooks, manuals, bulletins, directives, checklists, and route sheets.

• Ability to communicate work related information in writing to maintenance, operations and other personnel to complete forms or provide routine and technical information (e.g., in work logs, e-mails, memos and technical reports/documents).

• Ability to follow oral and written directions, instructions, rules, policies and/or procedures correctly and in order.Ability to develop and maintain effective working relationships; to work with teams; to help others; to accept suggestions; to treat others with dignity and respect.

• Ability to demonstrate organizational commitment to the public service goals and mission of the Postal Service. Ability to be conscientious to carry out job tasks; to be responsible and dependable; to take care in performing routine and novel tasks; to track details; to check that all work is accurate and complete; to record information accurately.

• Ability to work from heights refers to the ability to perform safely and efficiently the duties of the position above floor level such as from ladders, catwalks, walkways, scaffolds, vert-a-lifts, and platforms.

• Knowledge and ability to use various hand or portable power tools in performing mechanical, electrical, electronic or other maintenance work; this may include the use of shop power equipment. This ability includes the safe and efficient use and maintenance of such tools as screwdrivers, wrenches, hammers, pliers, chisels, punches, taps, dies, rules, gauges, and alignment tools; refers to the knowledge of, and proficiency with, various power tools; the ability also involves the safe and efficient use and maintenance of power tools such as drills, saws, sanders, and grinders; refers to the knowledge of, and proficiency with, shop machines such as bench grinders, drill presses, and table/band saws.

• Knowledge and ability to use test equipment, gauges or tools to take measurements and/or to take measurements with electrical or electronic test equipment (such as VOMs, oscilloscopes, amprobes) to perform maintenance work; this includes various types of maintenance equipment and may monitoring the operation of a system or machine or use of data networking test equipment.

EXAMINATION REQUIREMENTS:

Applicants must successfully complete Postal Service Test 955, for the Electronics Technician job group, which measures maintenance knowledge, skills and abilities.

In addition, applicants must successfully complete a structured interview evaluation.

ADDITIONAL PROVISIONS:

1. Applicants must be able to operate powered industrial equipment.

2. For positions requiring driving, applicants must have a valid state driver's license, and demonstrate and maintain a safe driving record.