Bioconductor Install Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Tidewater Staffing is currently seeking Outside Machinists for work in various local shipyards including locations of Newport News, VA, Norfolk, VA, and Portsmouth, VA.
The Outside Machinist must possess knowledge, skills, and abilities to perform job operations/tasks on conventional and nuclear ships and submarines. The Outside Machinist must be assignable to any work center excluding nuclear and subsafe machinery.
The following is a list of typical work that an Outside Machinist might be asked to perform:

• 
  
• Remove, repair, overhaul, install and align main propulsion machinery and associated equipment/components. Also remove, repair, overhaul, install, and align equipment associated with auxiliary systems such as condensers, compressors, pumps, forced draft blowers, main feed pumps, various types of valves, cargo handling machinery, anchor handling gear, boat davits, cranes, elevators, conveyors, firefighting equipment, machine shop equipment, galley, and laundry equipment.
  
• Install and repair foundations for operating machinery and principal structures/components of the ships armament.
  
• Install, adjust, set, and repair or replaces various control/regulating or safety devices such as meters, gauges, valves, governors, and automatic alarms. Test or assist in the testing of shipboard machinery pier side or on sea trials to prove satisfactory operation and acceptance.
  
• Use various portable and fixed machine tools such as boring bars, milling machines, facing machines, and drill presses. Use precision measuring instruments such as height gages, depth gages, calipers, verniers, and various types of micrometers, and assists in the use of optical equipment.
  
• Coordinate and arrange for the work of several trades in connection with performing work from information received from technical work documents, blueprints, specifications, and written and/or oral instructions.
  
• Engineer, steam, machinist, installation, marine erector, marine machinist, outfitter, outside-installation machinist Installs ship machinery, for example, propelling machinery, auxiliary motors, pumps, ventilating equipment, and steering gear, working from blueprints and using hand tools, calipers, and micrometers.
  
• Lays out passage holes on bulkheads, decks, and other surfaces for connections, for example shafting and steam lines.
  
• Installs below-deck auxiliaries, for example, evaporators, stills, heaters, pumps, condensers, and boilers, and connects them to steampipe systems.
  
• Tests and inspects installed machinery and equipment during dock and sea trials.
  
• May also set up and operate such machine shop tools as lathe, boring mill, planer, shaper, slotter, and milling machine to fabricate replacement parts.
  

NOW HIRING: Field Operations Manager | $100,000–$125,000+ Earning Potential Climate Experts — Melbourne, FL | Locally Owned & Growing Fast

Are you an experienced trades leader ready to run a multi-department operation and be rewarded for results? Climate Experts is looking for a Field Operations Manager to lead our HVAC, Plumbing, and Electrical teams — and we pay top dollar for the right person.

$70,000–$80,000 base salary (based on experience)  Monthly performance bonuses — total earning potential $100,000–$125,000+  Take-home company vehicle  Full benefits: Health, Dental & Vision  401(k) retirement plan  Locally owned — you'll have a real voice here

ABOUT CLIMATE EXPERTS

Climate Experts is a fast-growing, family-owned home services company serving Brevard County and surrounding areas. We deliver a world-class customer experience in HVAC, plumbing, and electrical services. As we continue to expand, we need a driven leader to take ownership of our field operations and help us scale to the next level.

THE ROLE

This is a high-impact position for an experienced trades professional ready to lead at the highest level. You'll oversee our HVAC Sales & Install, Plumbing Service & Install, and Electrical Service & Install departments — managing technicians, installers, project managers, and apprentices across all three trades. You are the key driver of field performance, quality, and culture.

WHAT YOU'LL OWN

HVAC Sales

• Lead and coach Project Managers to drive close rates and hit sales targets
• Review all estimates and build sheets for accuracy before equipment is ordered
• Maintain gross profit margins and hold the team to quality standards

Plumbing — Service & Install

• Manage plumbing technicians across service and installation
• Monitor close rates, callbacks, and ensure repair options are presented on every call
• Set up install crews and manage installation checklists
• Drive team performance through ride-alongs, coaching, and accountability

Electrical — Service & Install

• Oversee electrical service and installation teams
• Ensure technicians are running calls properly and representing the company at a high standard
• Coordinate with dispatch to get the right tech on the right job

Team Leadership & Development

• Run daily huddles and set the tone for the day
• Conduct weekly training sessions and bi-weekly 1-on-1s with direct reports
• Build and manage performance reviews, 90-day evaluations, and career progression plans
• Coach techs and installers in real-time through ride-alongs and job visits
• Manage apprentice training programs including EPA and NATE certification prep

WHAT WE OFFER

• $70,000–$80,000 base salary (based on experience)
• Monthly performance bonus — total comp $100,000–$125,000+ for the right performer
• Take-home company vehicle or gas card
• Health, Dental & Vision insurance
• 401(k) retirement plan
• Paid time off
• Company expense card
• Nexstar coaching and leadership development investment
• A culture built on accountability, growth, and doing right by the customer

WHAT WE'RE LOOKING FOR

• 5+ years of management experience in trades, sales, or field operations
• Proven track record leading teams in a field services environment
• Service Titan experience is a strong plus
• Exceptional communication, coaching, and leadership skills
• Valid driver's license with a clean driving record
• Local to Brevard or Indian River County
• Someone who takes ownership, holds standards high, and leads by example

SCHEDULE

Monday–Friday, 7:00 AM–4:00 PM in office/field Phone availability weekdays 4:00–9:00 PM and on weekends for field team support

If you are the kind of leader who thrives on results, loves developing people, and wants to be rewarded for what you build — we want to hear from you.

• Apply now or send your resume to:      

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• A ble to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :  

• This position is for a variety of shifts   

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Gunwerks

Chief Operating Officer (COO)

Location: Cody, Wyoming (On-site; relocation required)

Reports to: CEO (Aaron Davidson)

CEO retains: Brand + Product Vision

COO owns: Everything else ….Day-to-day operations, systems, and execution

About Gunwerks

Gunwerks is a premium, high-performance hunting and precision rifle company built around craftsmanship, engineering excellence, and uncompromising quality. We design and deliver complete, high-end shooting systems for discerning customers who demand reliability and accuracy in real-world conditions.

The brand is defined by precision, performance, and pride in the build—paired with a commitment to continually improve both the product and the customer experience.

Gunwerks is transitioning from founder-driven excellence to system-driven scalability. The COO will be central to that evolution.

Role Summary

Gunwerks is seeking a hands-on, systems-driven Chief Operating Officer to run day-to-day operations and install durable execution discipline across the organization.

This role is responsible for:

• Building a scalable operating system
• Improving workforce throughput and labor productivity
• Installing accountability across leaders
• Reducing turnover through better structure and standards
• Creating durable training and documentation systems
• Ensuring compliance rigor in a regulated industry

The COO enables the CEO to focus on brand, product development, and vision by owning operational execution end-to-end.

This is an on-site leadership role in Cody, Wyoming. Relocation is required.

Primary Mandate

Run the business operating system so plans turn into execution—on time, with quality, and with accountability.

Build systems that endure beyond personalities.

Core Responsibilities

1) Install the Operating System & Accountability Cadence

• Implement a practical weekly operating rhythm (scorecard, priorities, issue log, decision tracking).
• Translate strategy into quarterly priorities with owners, milestones, and dates.
• Build accountability into the system: commitments, standards, and follow-through.
• Ensure issues are surfaced, solved, and closed—not revisited repeatedly.

2) Own Operations Execution End-to-End

• Run manufacturing, supply chain, scheduling, capacity planning, quality, and delivery.
• Create predictable production performance with minimal surprises.
• Drive continuous improvement that sticks (disciplined routines vs. short-term programs).
• Increase output per labor hour while protecting quality standards.

3) Engineering Execution Discipline

(COO owns execution discipline; CEO retains product vision.)

• Install structured development milestones and change-control rigor.
• Prevent scope creep and missed launch commitments.
• Ensure engineering outputs translate cleanly into manufacturable processes.
• Strengthen documentation between Engineering and Production.
• Drive accountability for delivery timelines and cross-functional handoffs.

Engineering must be predictable—not personality-driven.

4) Compliance & Regulatory Rigor

Gunwerks operates in a regulated environment. The COO will:

• Own operational compliance systems (including ATF traceability and documentation integrity).
• Ensure serialized controls and production documentation are audit-ready.
• Establish revision control across SOPs and technical documentation.
• Reduce regulatory risk through proactive systems—not reactive correction.

Compliance must be institutionalized.

5) Fix Throughput & Frontline Productivity

• Diagnose and eliminate productivity inhibitors (low utilization, weak supervision, unclear standards).
• Install frontline management “standard work.”
• Create visible performance tracking and expectations.
• Increase labor effectiveness without proportional headcount growth.

6) Facilities & Operational Environment Standard

The Gunwerks facility must reflect the premium brand.

The COO will:

• Implement and sustain daily discipline.
• Eliminate cluttered workspaces and unmanaged material flow.
• Install visual management standards.
• Create an environment that signals craftsmanship, order, and control.

Operational discipline must be visible.

7) Build Training & Documented Systems

• Create a documented operating system across training, SOPs, engineering documentation, and compliance controls.
• Reduce tribal knowledge dependency.
• Accelerate onboarding and competency development.
• Design systems that produce measurable results years from now—not just this quarter.

8) Build the People & Retention System

• Reduce turnover through structural improvements beyond pay.
• Install role clarity and advancement paths (including mastery tracks for craftspeople).
• Strengthen supervisor capability and performance management.
• Ensure underperformance is addressed promptly and fairly.

Measures of Success

• Meaningful improvement in throughput and labor productivity.
• Improved quality outcomes and fewer rework/defect issues.
• Material reduction in turnover.
• Engineering projects delivered on time.
• Clean compliance audits and documentation integrity.
• Operating cadence runs reliably.
• CEO leverage increases (fewer operational escalations).

Ideal Candidate Profile

• Proven operator and systems builder in a founder-led or high-growth environment.
• Strong manufacturing/shop-floor leadership experience.
• Experience in regulated manufacturing (firearms, aerospace, defense, medical, or similar).
• Demonstrated history of improving throughput and labor efficiency.
• Detail-oriented and systems-obsessed.
• Builds simple systems people actually follow.
• Calm, decisive, and comfortable enforcing standards.
• Willing to relocate and lead on-site.

First 90 Days

Days 1–30: Diagnose & Baseline

• Baseline throughput, quality, turnover drivers, compliance risk, and documentation gaps.
• Clarify decision rights and escalation guardrails with CEO.

Days 31–60: Install Cadence & Frontline Routines

• Launch weekly execution rhythm.
• Implement supervisor standard work and shop-floor visibility.
• Identify compliance/documentation risks.

Days 61–90: System Build & Early Wins

• Roll out structured training and core documentation improvements.
• Present 6–12 month operating improvement plan with measurable targets.

Working Contract with CEO

• Agreement is optional; commitment is mandatory once a decision is made.
• Debate in private; align in public.
• Direct communication. No politics.

Do you enjoy working both inside and outdoors, and have the skills and experience to install custom interior and exterior signs using hand and power tools, and construction and installation best practices and techniques? Are you a natural problem-solver who can work independently and think on your feet? In this role you'll play an important role in getting custom signs and graphics in place so everyone can see them - in the ground, on a wall, hanging from a ceiling, or on a vehicle...

WE OFFER A $500.00 SIGNING BONUS OR RELOCATION ASSISTANCE FOR HIGHLY QUALIFIED APPLICANTS

Benefits:

• Enjoy the work-life balance of regular Monday-Friday business hours, weekends and holidays off
• Company paid holidays and paid vacation
• Company paid workers compensation insurance and short term disability insurance
• Company medical benefits program

Your role will include:

• Load, secure, and transport signs, tools, and materials safely to customer sites.
• Preparing customer sites for installation, including removing old signage and preparing the surface or structure
• Installing signs in the ground, in and on buildings and walls. Some prior experience working with vinyl graphics is a strong plus
• You'll perform this work using a company vehicle and a suite of company provided installation tools.

Job Requirements:

• A High school diploma or GED
• Strong mechanical aptitude, basic math and computer skills skills. Experience with a variety of hand tools and light power equipment.
• The ability and willingness to work outdoors, and including moderate to strenuous labor carrying signs and materials sometimes in excess of 50 lbs. Climbing, and working at low to medium heights
• Prior installation or construction/assembly experience is required. An electrical license is highly desired but not required
• A valid driver's license, and a clean driving record is required

A career at FASTSIGNS as a Custom Signs Installation expert may be for you!! FASTSIGNS is a long-established and respected global brand. Virtually every business in every industry needs and uses signs, so you will get to see your work around town. The teams at FASTSIGNS Charlotte (South Tryon), South Charlotte (Ballantyne/Pineville), and Rock Hill SC have been serving the greater Charlotte metropolitan area for more than 25 years. Apply now to learn more!

• 
  
• Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.
  
• Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.
  
• Fabricate and install fixtures and jigs required for welding process alignments.
  
• Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.
  
• Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.
  
• Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.
  
• Leads technical project teams, schedules, reports and briefs customers and senior management.
  
• Performs duties outside of specialty in order to complete installation or work assignment.
  
• Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.
  
• Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.
  

• 
  
• Must possess a high school, trade or vocational school degree
  
• 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment
  
• Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred
  
• Must have or have the ability to obtain a SECRET clearance
  
• Must have the ability to obtain base access and security credentials
  
• Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs
  
• Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces
  
• Travel may be required within and outside of the continental United States
  
• Due to export control regulations, this role is open to U.S. citizens of the US
  
• Demonstrated reliability and punctuality; must be able to consistently report to work on time
  
• Possess basic and some advanced specialized welder's tools
  

• 
  
• Working with Task Leaders, program/project managers, and SMEs, the welder will assist with:
  
• the Shipboard installation and integration of complex audio visual display
  
• various communication and electronic warfare systems
  
• related ancillary and computer based systems onboard naval ships and command centers worldwide.
  
• Other Duties as assigned.
  

• We expect this employee to have experience in and be familiar with work being performed in or around industrial environments such as shipyards and Naval/Coast Guard bases and piers. As well as various and subcontractor Government sites.

• 
  
• Must be a U.S. citizen.
  
• Must have or be able to obtain a Secret clearance.
  
• Must have High School diploma.
  
• Must be willing to travel up to 75% CONUS/OCONUS.
  
• Must be willing to work extended hours including weekends and holidays.
  
• Must have a valid driver's license and reliable transportation.
  
• Must have experience in welding steel and aluminum.
  
• Must have experience welding in a shipyard environment.
  
• Must have the ability to lay out and perform structural modifications and install foundations based on reading SIDs and ICDs
  
• Must be willing to perform other installation tasks in addition to welding. Such as cable installation, priming, lagging, painting, on load and offload of equipment and materials.
  
• Must be able to successfully pass a pre-employment background check and pre-hire drug test.
  

• 
  
• Experience brazing copper nickel pipe and Oxy Fuel torch operation.
  
• CPR and first aid training experience.
  
• Confined space training.
  
• Climber safety training.
  

• 
  
• This is a full-time position in support of the Chugach integration and installation tasking team lead. The work may be performed at (Location TBD), industrial areas to include; shipyard, Navy/Coast Guard bases, shipboard and shore site locations.
  
• Work is performed inside industrial environments and subject to working around exposures to hazards that may cause bodily harm, cuts, bruises, burns, etc.
  
• Work may also be performed outside even during in climate weather.
  
• Work may be performed at heights (aloft) where fall protection is required.
  
• Work may be performed welding and cutting of metal.
  
• Work may be performed off a ladder.
  

• 
  
• Ability to lift 45 lbs., climb vertical ladders, operate and work around heavy machinery.
  
• Work at heights (aloft).
  
• Operate power tools safely.
  
• Carry equipment and machinery around ships.
  
• Ability to stand and walk most of the shift.
  
• Kneel and crawl at work site.
  
• Crouch through void openings.
  
• Safely evacuate ship during an emergency.
  

Job Location:

Sacramento, CA 95834.

About the Job:

Title of the Position: Automation Technician

The Automation Technician ensures reliable operation of sterile pharmaceutical manufacturing systems by installing, maintaining, calibrating, and troubleshooting automation components, process instrumentation, drives, motors, control devices, clean utility systems, and aseptic production equipment. The role supports continuous and compliant operations under cGMP, FDA 21 CFR Part 11, and cleanroom standards.

Responsibilities:

• Install, maintain, calibrate, and troubleshoot sensors and transmitters for pressure, temperature, flow, level, pH, conductivity, and environmental monitoring.
• Support in performing GMP‑compliant calibrations with complete traceability and accurate documentation.
• Install, maintain, and troubleshoot motors, pumps, fans, drives, control devices, and sterile manufacturing equipment.
• Perform conduit bending, cable routing, wire pulling, cable termination, tray installation, and equipment connections in accordance with plant procedures.
• Install and modify control panels, junction boxes, and instrumentation assemblies.
• Diagnose issues in circuits, protection components, sensors, actuators, drives, and automated machines.
• Use diagnostic tools such as multimeters, clamp meters, insulation testers, and calibration instruments.
• Support PLC, HMI, SCADA, BMS, and EMS platforms, including troubleshooting and system checks.
• Conduct loop checks, functional tests, FAT/SAT, commissioning, and support validation activities (IQ/OQ/PQ).
• Maintain and troubleshoot systems for PW, WFI, Clean Steam, CIP/SIP, HVAC/HEPA controls, and aseptic filling/packaging operations.
• Read and interpret P&IDs, wiring diagrams, schematics, ladder logic, and loop drawings.
• Maintain cleanroom support systems, including differential pressure controls, HEPA filtration, and environmental monitoring.
• Ensure compliance with cGMP, cleanroom classification requirements, FDA 21 CFR Part 11, and data integrity principles.
• Perform preventive, corrective, and predictive maintenance.
• Conduct root‑cause analysis and implement CAPA actions.
• Maintain accurate CMMS entries, calibration logs, and audit‑ready documentation.

Working Condition:

• Ability to work rotating, weekend, or extended shifts.
• Exposure to high‑noise areas (PPE provided).
• Frequent work on mezzanine floors, elevated platforms, ladders, and step‑ups.
• Work inside aseptic cleanrooms and controlled environments (ISO 5/7/8) wearing full gowning.
• Exposure to hot, cold, humid, or pressurized utility systems such as PW, WFI, Clean Steam, and HVAC units.
• Occasional work in tight spaces, behind panels, or equipment enclosures.
• Regular use of PPE, including sterile gowning, gloves, and eye protection.
• Ability to lift to 50 lbs and perform hands-on tasks for extended periods.

Qualifications:

Education:

• BE – Mechanical/Chemical from a reputed University

Experience: Minimum 5 to 10 years of professional experience in the field of pharmaceutical or manufacturing industry.

Knowledge, Skills, and Abilities: Functional:

• Strong troubleshooting skills across sensors, transmitters, motors, drives, actuators, control components, automated machinery, and process systems.
• Experience with conduit bending, tray installation, cable pulling, wire routing, cable dressing, and termination.
• Proficiency in installing and modifying panels, junction boxes, and equipment assemblies.
• Skilled in using multimeters, clamp meters, insulation testers, and calibration devices.
• Ability to install, connect, and terminate control wiring and instrument cabling for field devices.
• Understanding of circuits, drives, starters, protection components, actuators, and control system diagnostics.
• Ability to read and interpret P&IDs, schematics, wiring diagrams, ladder logic, and loop documentation.
• Knowledge of GMP requirements, sterile manufacturing, cleanroom practices, aseptic operations, and validation processes.
• Strong documentation discipline, attention to detail, and audit readiness.
• Ability to work efficiently and safely in regulated manufacturing environments.

Behavioral:

• Result oriented
• Innovative thinking
• Time Management, Professional Work Conduct at all times
• Problem-solving ability & High level of self-motivation
• Strong interpersonal relationship skills
• Strong written & verbal communication skills

Requirements:

• Valid driver's license and acceptable driving record
• Legally authorized to be employed in the United States
• Must live or be willing to move to the Sacramento Metropolitan Region (Approx 40 miles' radius)

Benefits:

• Competitive Salary: $80,000 - $90,000
• Yearly bonus eligibility
• Benefits: offers a wide variety of benefits and programs to support health and well-being, including medical, dental, and vision coverage
• Paid time off plan
• 401k savings plan

The Technical Project Manager (TPM) has three main responsibilities:

1. Project Manage all technical tasks during implementation and upgrades.
2. Install and configure servers and the Care Logistics applications in Amazon Web Services (AWS) and on premise.
3. Perform technical operations and oversee availability, performance, and supportability of our observability infrastructure.

The TPM acts as the project manager and liaison between Care Logistics and the customer for all technical activities. The TPM is responsible for coordinating the system configuration, sizing, ordering, and installation while technically engineering and managing the integration of Care Logistics solutions. They work closely with Solutions Delivery and customer resources in support of organizational objectives. Solutions Delivery functions include project delivery tasks such as solution sizing, technical project planning, customer guidance, system installation, system validation, system testing, technical training, and support of technical onsite events. The TPM facilitates DevOps functions between development and the Solutions Delivery teams to ensure technical operations are correctly executed, effectively communicated, and continuously improved.

ESSENTIAL RESPONSIBILITIES:

Solutions Delivery Functions

• Delivery components of customer project tasks which include:
• Assist with the design and implementation of new technologies
• Assist with the sizing of customer systems
• Train new employees on all aspects of the role
• Considered a Subject Matter Expert for all aspects of the technology and project delivery
• Install and troubleshoot software, hardware, and services necessary to support Care Logistics solutions
• Lead the engineering of hospital customer’s technical solutions
• Lead, plan, organize and drive the design, testing, and implementation of Care Logistics software solutions and related advisory services
• Educate customer on technical aspects of the Care Logistics system
• Interface with service and hardware system vendors to build and configure systems
• Participate in onsite customer events, including technical go-live
• Technical Operations and Observability:
• Manage alert and monitoring configuration
• Collect, aggregate, and visualize metrics to provide actionable insights
• Advise right-sizing of AWS infrastructure resources to optimize cost and performance
• Manage incident response
• Provide insight to Cloud Center of Excellence
• Additional tasks which include:
• Provide primary technical support for project team members
• Provide Tier 2 level support for Care Logistics Support team
• Create and maintain internal environments for use by Care Logistics Client Engagement team
• Create Knowledge Base articles and other technical documentation for use by Care Logistics employees and customers
• Define and maintain a clear, concise documented process for the implementation and integration of the system
• Collaborate with teammates to troubleshoot and maintain existing application modules
• Participate in DevOps initiatives to improve products and operations

QUALIFICATIONS – EDUCATION, WORK EXPERIENCE, CERTIFICATIONS:

REQUIRED

• Bachelor’s degree in Computer Information Systems or equivalent experience
• PMP certification and/or equivalent experience
• 2-4 years hands on experience using Amazon Web Services (AWS) services such as EC2, RDS, Systems Manager, VPN, CloudWatch
• 2-4 years of monitoring systems experience using tools such as AWS CloudWatch, Datadog, New Relic, SolarWinds, Dynatrace, etc.
• 4-6 years demonstrated project management experience
• Advanced operation and maintenance of Linux (Red Hat Operating System)
• Demonstrated advanced analytical and troubleshooting skills
• 3+ years integrating software/hardware systems in client-server and cloud environments
• Proven organizational and delivery skills

DESIRED

• AWS certification desired
• Automating and configuring Amazon Web Services (AWS) such as EC2, RDS, VPN
• Operational best practices related to systems operation and maintenance in on-premises and AWS production environments
• Industry standard application/applet containers such as Tomcat
• PostgreSQL and Aurora Databases (installation, configuration, and operation)
• Production High availability server environments
• Complex hardware and software installations
• Management of enterprise reporting tools and/or related technologies
• Project delivery, operations, and support using DevOps and/or Agile methods
• Support leadership experience
• Use of ticketing systems such as JIRA and/or related incident management tools such as OpsGenie
• Comprehension of related scientific and technical journals, abstracts, financial reports, and legal documents.
• Preparation of articles, abstracts, editorials, journals, manuals, and critiques.
• Preparation and delivery of comprehensive presentations, participation in formal debate, extemporaneous communication, and professional communication before an audience.
• Professional certifications in related industry skills such as DBMS, CISSP, ITIL, Agile, and Lean are a plus

KNOWLEDGE, SKILLS, AND ABILITIES:

• Develop strong and productive working relationships with others
• Form strong team bonds and enhance team performance
• Strong organizational and quality management skills with ability to handle multiple, competing tasks and priorities
• Cope with rapidly changing information in a fast-paced environment
• Proven communication, interpersonal, analytical, and organizational skills
• Proven ability to properly communicate with customers (in person and via phone) and manage expectations during a project
• Work both independently and as a member of the implementation and support team
• Manage multiple concurrent activities, all with fluctuating deadlines, by working with other departments, both internal and external
• Quickly identify and resolve issues
• Quickly understand complex concepts
• Excellent oral and written communication skills
• Excellent customer management skills
• Above average observational skills to collect data and validate information
• Outstanding analytical skills with the ability to critically evaluate the information gathered from multiple sources, reconcile conflicts, relate high-level information to details, and distinguish user requests from underlying business problems/needs.
• Effectively represent Jackson Healthcare/Care Logistics values and principles in decision-making and actions
• Support leadership and/or project management
• Excellent troubleshooting skills
• Excellent organizational and delivery skills
• Install, configure, and manage hardware and software in AWS and on-premises environments
• Provide specifications for system hardware and AWS service requirements
• Implement complex system solutions involving multiple technologies
• Control and implement complex system and application feature configurations
• Troubleshoot complex system and technical issues
• Read and understand system and application logs
• Proven ability to communicate and teach complex technical concepts to less technical resources
• Excellent communications and interpersonal skills, as well as analytical and problem-solving skills
• Excellent documentation skills

REQUIRED KNOWLEDGE

• Amazon Web Services (AWS) services such as EC2, RDS, Systems Manager, VPN, CloudWatch
• Monitoring systems such as AWS CloudWatch, Datadog, New Relic, SolarWinds, Dynatrace, etc.
• In-depth knowledge of Linux (Red Hat Operating System) concepts and operations in a production environment
• VMware, Web servers, DBMS, Reporting and analytic tools
• Project Management Methodologies
• Advanced PC knowledge including proficiency with MS Outlook, Word, Excel, and PowerPoint

DESIRED KNOWLEDGE

• Knowledge automating and configuring Amazon Web Services (AWS) such as EC2, RDS, VPN
• Understanding of high availability server environments
• Hardware and software installation techniques
• Healthcare Information Systems
• Enterprise reporting tools
• DevOps and Agile methodologies related to project delivery, operations, and support
• Ticketing systems such as JIRA and related incident management tools (such as OpsGenie)

TRAVEL REQUIREMENTS & WORKING CONDITIONS:

• 10-80% travel required
• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
• While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; write; type; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and smell
• The employee must frequently lift and/or move up to 50 pounds
• Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus

As a Pipe Journeyman, you will perform pipefitting and pipe welding on commercial and industrial construction projects in the Mobile, AL area. Ability to travel, as needed, for projects

Job Duties

• Lay-out, install, repair, troubleshoot, and maintain piping systems, pipe supports, fixtures, and related hydraulic and pneumatic equipment
• Duties include pipefitting, pipe welding and installation of pipe hangers and related materials
• Ability to work with carbon steel, copper, iron, stainless steel, etc. piping ranging in size up to 10 inches
• Plan installation and repairs to avoid obstructions
• Ability to cut, thread, bend and weld pipe as required by specifications using saws, cutting torches, pipe cutting machines, threading machines, bending tools and machines, and welding torches
• Installation of chilled, hot and steam piping
• Installation of valves, hangers, supports, and flanges inside HVAC piping systems
• Secure pipe to structures with hangers, brackets, and clamps using hand and power tools
• Prepare pipe and fittings for hoisting and rigging
• Able to work off ladders, man lifts and other equipment from various heights
• Perform other related duties or special projects as assigned

Requirements

• 5 or more years of experience working with HVAC piping installation preferred
• 6G certification required
• Experience installing chillers, boilers, and cooling towers
• Experience installing chilled, hot and steam piping
• Familiarity with blueprint, schematic, drawing, and other equipment layout materials
• Experience leading/coaching an Apprentice
• OSHA 10 certification preferred (company will provide if needed)

Additional Requirements

• Maintain a positive, cooperative, and teachable attitude
• Initiative; self-motivated (driven), self-starter
• Complies and promotes company Safety Policy
• Requires basic mechanical aptitude and English language skills
• Analytical and problem-solving skills
• Regular and punctual attendance. Ability to work overtime if needed
• Ability to stand, squat, bend, stoop, and comfortably lift up to 50 lbs
• Ability to pass a full background screening and drug screening
• Ability to pass MVR check and physical ability assessment
• Ability to travel, as needed, for projects

Compensation

• Wage Range Starting at: $26.00+/hr. based on qualifications & experience

Comprehensive Benefits

• Medical, Vision, Dental
• Paid holiday and vacation
• 401(k) Plan with multiple investment options
• Training and Development Programs
• Employee discount programs
• Company-paid and voluntary life insurance
• Company-paid and voluntary accidental death & dismemberment (AD&D)
• Company-paid short-term disability
• Vehicle discount purchase programs

Disclaimer

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this job. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Comfort Systems USA (Southeast), Inc. is an equal opportunity employer in all aspects of employment and prohibits discrimination and harassment of any type to all individuals regardless of race, color, religion, sex, sexual orientation, national origin, age, disability, veteran status, genetic information, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

We strive to foster a work environment that includes and embraces racial, ethnic and gender diversity and other individual differences. Our commitment to diversity and inclusion helps us attract and retain the best talent, enables employees to realize their full potential, and drives high performance through innovation and collaboration.

We do not accept unsolicited assistance from recruiters or staffing agencies. Any resumes submitted without prior written agreement will be considered unsolicited and free of charge to Floor Authority.

About Us: Floor Authority is a leading provider of high-quality flooring solutions for residential and commercial spaces. With a commitment to excellence, innovation, and customer satisfaction, we offer a comprehensive range of flooring products and services tailored to meet the unique needs of our clients.

Job Overview: Floor Authority is currently looking for a Field Manager in Charleston, SC. The ideal candidate is responsible for the overall management and coordination of field operations. This role involves supervising installation crews, managing project timelines, maintaining quality standards, and ensuring customer satisfaction. The ideal candidate will possess strong leadership, organizational, and problem-solving skills.

Essential Duties & Responsibilities:

• Oversee daily field operations, including scheduling, dispatching, and coordinating installation crews.
• Conduct site assessments before installation to ensure project readiness.
• Work closely with the office team to ensure proper project documentation and customer satisfaction.
• Ensure adherence to project timelines and deadlines, communicating effectively with customers and internal teams.
• Maintain high-quality standards for all installations, conducting regular inspections and addressing any issues promptly.
• Manage inventory and equipment, ensuring proper utilization and maintenance.
• Resolve customer complaints and issues in a timely and professional manner.
• Build and maintain strong relationships with customers, subcontractors, and suppliers.
• Conduct performance reviews of installation crews and provide feedback to team members.
• Monitor and control field-related expenses.
• Stay up to date on industry trends and best practices.
• Communicate information with cross-functional team members; ability to use technology to take appropriate photos and complete documentation of inspections or provide updates while in the field.
• Requires an abundance of driving daily which may include picking up and/or delivering materials. Field Managers will be responsible for multiple neighborhoods in various areas.
• Required to assess, schedule, and complete all punch work and/or repairs needed by builders.
• Must be able to lift heavy objects up to 100 lbs. and move them on job sites.
• Job will require some hands-on work.
• Ability to read and interpret blueprints and technical drawings.

TRAVEL & WORK SCHEDULE:

• This role requires regular travel to job sites within the Charleston area. A company vehicle will be provided.
• This is a full-time position with standard business hours, Monday–Friday. Some evening or weekend work may be required to meet project deadlines or address urgent issues.

Desired Candidate Qualifications:

• Proven experience in field management or a related role in the flooring industry.
• Strong leadership and organizational skills.
• Excellent communication and interpersonal skills.
• Ability to manage multiple projects simultaneously.
• Proficient in using computer software and technology.
• Valid driver's license.
• Proficiency with MS Office and email
• Ability to lift up to 50lbs.
• Provide client/customer support from start to finish of all projects and maintain in contact with clients during and after completion of project.
• Time management skills: Able to prioritize multiple competing priorities executing in order of priority.
• Attention to detail and commitment to delivering the Floor Authority Standard.
• Bachelor’s degree in a related field preferred but not required.
• 3+ years related experience in the flooring industry or related industry.

Working Conditions:

• This role involves both office and field work, requiring time spent on construction sites, customer locations, and warehouse facilities.
• Work conditions may include exposure to varying weather conditions, loud noise levels, and physically demanding tasks such as walking, standing, lifting, and inspecting job sites.

Company Benefits:

• Competitive salary.
• Health, dental, and vision insurance.
• Retirement savings plan.
• Paid time off and holidays.
• Professional development opportunities.

What Success Looks Like:

• Following the Floor Authority Playbook for streamlined operations.
• Effective project execution: You ensure installations are completed on time and within scope, proactively addressing challenges to avoid delays.
• Problem-Solving & Adaptability: You anticipate potential job site issues and resolve them efficiently, keeping projects on track without unnecessary stoppages.
• Clear & Consistent Communication: You maintain strong communication with customers, installation crews, and internal teams, ensuring everyone is aligned and informed.
• High-Quality Standards: You enforce quality control measures, conducting thorough inspections to guarantee flawless installations and customer satisfaction.
• Customer Satisfaction & Retention: Your proactive approach and attention to detail result in satisfied customers, positive reviews, and repeat business.

Job Type: Full-time

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Employee discount
• Health insurance
• Paid time off
• Retirement plan
• Vision insurance

Work Location: In person