Ayers Basement Systems Jobs in Usa
12,450 positions found — Page 3
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.
Use a tension meter to set cable tension according to specifications.
Conduct reaming and riveting as necessary to complete work assignments.
Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.
Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings or paperwork that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.
Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.
Disassemble parts and deburr holes to prepare for fastener installation.
Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.
Install cable control pulleys and rig control cables according to drawings and specifications.
Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.
Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
Experience using hand tools and/or hand-held power tools
Experience working with safety and quality processes and procedures.
Basic Computer experience and competency.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.
Preferred Qualifications:
Experience reading and interpreting drawings, specifications,
material processes, schematic and diagrams
Attended a Boeing partnered manufacturing related high school or
Preferred community and technology college academic program
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $24.32 – $53.30
Applications for this position will be accepted until Sept. 04, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.
We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team. In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements. Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities
Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.
Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.
Conduct continuity checks to ensure proper functionality of electrical systems.
Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.
Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling. Typically assigned work that has been previously sequenced.
Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.
Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.
Perform hand forming of electrical wiring and soldering as required to complete work assignments.
Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.
Execute necessary riveting tasks as part of the assembly process.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications
1+ years of experience in electrical assembly installation.
1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).
1+ years of experience handling chemicals and/or hazardous materials.
Ability to recognize colors.
Ability to work in confined spaces.
Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications:
1+ years of experience as an Electrician or Apprentice.
Completion of an electrical trade school program or have military related electrical experience.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Jul. 09, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
The Systems Analyst I will provide application support and optimization.
They work closely with the Service Desk to assist in responding to service requests.
The Application System Analyst I must be able to analyze business issues/requirements and workflows and apply their application knowledge to meet operational and organizational needs.
Project implementation responsibilities include collaborating with customers contributing to the analysis, testing, and documentation and implementation of medium to high complexity activities of assigned software.
This position must possess sufficient detailed healthcare knowledge and systems expertise to implement medium to high complexity assigned application with minimal guidance.
The Associate must be a self-motivated individual with exceptional communication and interpersonal skills and the ability to work well in team environments.
Responsibilities: Analyze, develop, test, document, educate, implement, support, and maintain or optimize assigned applications, solutions and business processes to meet operational and technical requirements.
Collaborates across project borders with other teams.
Thinks outside the box and proposes practical solutions to issues.
Communicates interdependencies with project leadership to proactively ensure quality and interoperability of design, configuration.
Applies basic understanding of information technology, including systems, applications, operations, and support.
Utilizes application training, application web site and application resource materials regularly and effectively.
Cleary understands customer needs and expectations.
Accurately documents business processes and workflows; communicates these with project team and stakeholders.
Maintains a working level understanding of assigned department operations, processes, and environment.
Provides clear and organized status reporting on key project areas to be used as external communications to stakeholders.
Performs basic process and requirement analysis, including process mapping though current flow charts, documents, requirement elicitation, and specification gathering in support of root cause problem solving and negotiating creative solutions.
In addition, using current and projected data, provides recommendations in assigned application.
Responsible for completing basic gap analysis, and providing recommendations.
Consistently follows up with end users.
Able to ask the right questions to obtain understanding of end user issues and needs.
Seeks information from others when end user issues appear to pose significant risks.
Demonstrates decision making based on facts (vs assumptions); Routinely researches multiple avenues to identify viable options.
Contributes to strategy discussions by identifying options with associated pros and cons with team members.
Adhere to organization standards for system configuration and change control.
Demonstrates core technical proficiency in application.
Able to independently design and configure application.
Has a basic understanding of and performs fact/data gathering and analysis with limited direction.
Designs basic workflows.
Begins to demonstrate mastery of at least one application.
Collaborate and develop strong relationships with end user communities, customers and business partners.
Collaborate with Operational Leaders to focus on standardized best practice workflow processes and content to ensure alignment across all ministries, to create efficiencies, and to ensure optimal operational processes.
Coordinates code changes with appropriate vendor related to financial and business application issues.
Collaborates with Technical Team to identify and infrastructure related issues that have resulted in application issues.
Share industry best practices from vendors with Operational Leaders.
Demonstrates increasing technical knowledge of the assigned application including relationships of infrastructure and impact to user if unavailable.
Serves as a liaison between business operations and providers, internal information technology, system users and vendors working within the defined project objectives for issue and problem resolution.
Follows strict change management processes ensuring proper approval, testing, and validation of system changes.
Written documentation requires minimal to no edits, has the confidence of the requestors and project team.
Associate is able to recognize he/her skills, habits, work ethic, and behaviors and use them to manage his/her work.
Associate is able to receive and process constructive feedback and affect adjustments to his/her skills, habits, work ethics or behaviors in a positive way.
Proactively and independently troubleshoot and resolve minor incidents and requests.
Completes task with attention to detail and high level of quality.
Performs self-review process prior to completion.
Design configuration require minimal additional QA by peer or lead analyst.
Manages low to medium complexity projects/requests.
Collaborates with team members as needed.
Complete in a timely manner assigned courses within Healthstream, other electronic tracking tools for educational related material or attend presentations in person as assigned.
Ensure the services that he/she provides contribute to the successful accomplishment of the primary mission of the department.
Ensures vendors meet agreed upon SLAs and follow processes.
May be required to travel to perform duties.
May be required to work additional hours as needed during critical problems.
Identifies and seizes new opportunities, displays can-do attitude in good and bad times and steps up to handle tough issues.
Performs other duties as assigned.
Requirements: Education/Skills Associates or Bachelor’s degree preferred with a focus in healthcare, business, or information systems.
Ability to present complex data in meaningful method, i.e., charts, graphs Ability to adjust to and implement change Problem Solving skills Multitasking skills Work as a team member Proficient in Microsoft applications including Word, Excel, and PowerPoint Excellent customer service skills Highly effective written and verbal communication and interpersonal skills to establish working relationships that foster optimal quality teamwork and education Strong organizational skills in managing multiple priorities Experience1+ Years of experience within healthcare, business, or information systems discipline Solves minor to moderate incidents with direction Develops new functionality for requests with direction Licenses, Registrations, or CertificationsAssociated certifications on area of focus, preferred For Epic Analysts: Certified or proficient in assigned Epic module (must be obtained within 6 months of employment date) Certifications or Proficiencies must stay current by maintaining new version training Work Schedule: MULTIPLE SHIFTS AVAILABLE Work Type: Full Time
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Lead, Integration & Test Engineering (Space Optical Systems)
Job Code: 33758
Job Location: Wilmington, MA
Job Schedule: 9/80 (Every other Friday off!)
Relocation: Relocation assistance is available to qualified applicants
Job Description:
On the L3Harris team, your job is to secure the world. We don't work here just for the advanced technology and equipment: we work here because we know what - and who - we're protecting! From families to the intelligence community, and from our climate to our men and women in uniform - we're making the world a safer place!
L3Harris Space Superiority group has an opening for a Integration & Test Engineer to join our team of qualified, diverse individuals. This position will be in Wilmington, MA. The individual will work in a fast-paced environment with significantly diverse assignments and a collaborative team setting.
AgileEO specializes in space-based, small aperture visible and IR telescopes with integrated electromechanical devices used for motion and focus control. The successful candidate will support the program technical leads (Lead or Chief Systems Engineer, IPT Lead) by performing technical analysis, managing specifications, and generating design review and technical documents. Additional responsibilities include supporting the test and design verification, requirements sell off, end item data package (EIDP) generation efforts.
Essential Functions:
* System Design and Integration: Develop and integrate advanced electro-optical systems for space-based applications, ensuring compliance with all relevant specifications and mission requirements.
* Team Leadership: Lead a team of engineers, overseeing and ensuring technical execution of projects. Coordinate with program leadership to develop a technical plan and path forward for program execution.
* Mission Payload AI&T Management: Manage major subcontract cost, schedule, and performance and oversee the overall Mission Payload Flight AI&T (Assembly, Integration, and Test) activities.
* Testing and Validation: Design, plan, and execute test procedures for electro-optical components and systems. Analyze test data to validate system performance against requirements. Identify and troubleshoot issues, propose corrective actions, and implement solutions.
* Requirements Management: Define, manage, and maintain system and sub-system level requirements, ensuring traceability and compliance throughout the project lifecycle.
* Project Execution: Lead and coordinate multidisciplinary engineering teams throughout the project lifecycle, from conceptual design to final system delivery and operation.
* Documentation and Reporting: Generate and maintain detailed technical documentation, including test plans, procedures, work instructions, test reports, and anomaly reports.
* Trade Studies: Develop and evaluate trade studies to support decision-making processes, ensuring accuracy and completeness.
* Stakeholder Communication: Communicate effectively with internal and external stakeholders, including subcontractors and U.S. Government customers, to ensure alignment and project success.
* Standards Compliance: Ensure all engineering activities adhere to industry standards, regulatory requirements, and best practices.
* Collaboration: Work closely with cross-functional teams, including engineering, production, and quality assurance, to ensure successful system integration and test.
* Written and Oral Communication: Demonstrate excellent written, oral, and presentation communication skills. Prepare effective presentations to communicate technical information to non-technical professionals.
* Continuous Improvement: Participate in process improvement initiatives to enhance test methodologies and system integration practices.
* Training and Mentoring: Provide training and mentorship to junior engineers, fostering their development and growth within the team.
* Candidate must be eligible to obtain a DoD security clearance.
Qualifications:
* Bachelor's degree in Engineering, Physics, or other related scientific discipline and 9 years of relevant EO/IR systems engineering work experience. Alternatively, a graduate degree with a minimum of 7 years of prior related experience, or in lieu of a degree, a minimum of 13 years of prior related experience.
* 5+ years experience working with systems integration and test
* Prior or current experience working with eletro-optical/imaging systems
* Prior or current experience working with space environment considerations and testing protocols
* Experience as a Control Account Manager (CAM) and Integrated Product Team Lead (IPTL) is required
* 5+ years experience with engineering and simulation software tools, such as MATLAB
Preferred Additional Skills:
* Active Secret or Top Secret/SCI clearance is highly preferred
* Demonstrated experience with space systems engineering, including knowledge of space environments, satellite systems, and space mission design. Familiarity with NASA-STD-1540 and/or NASA-STD-7002.
* Experience in leading technical teams, managing projects and competing priorities, and coordinating cross-functional engineering activities.
* Proficient in Model-Based Systems Engineering (MBSE) and traditional systems engineering tools such as DOORs, CAMEO, CREO, JIRA, and SysML.
* Excellent verbal and written communication skills, with the ability to clearly convey complex technical information to diverse audiences.
* Strong analytical and problem-solving abilities, with a proven track record of tackling complex engineering challenges.
* Ability to work effectively in a team environment and collaborate with multidisciplinary teams to achieve project goals.
In compliance with pay transparency requirements, the salary range for this role in Massachusetts is $1119,500 - $222,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English ( ) or Spanish ( ) . For information regarding your Right To Work, please click here for English ( ) or Spanish ( ) .
About the Role & Team
Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.
Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.
At Ride Engineering, it is our responsibility to move people through our stories in magical ways that bring these experiences to life! Ride Engineers bring optimism and solutions to design challenges that often seem impossible and partner with diverse creative talent to define and build one-of-a-kind experiences that bring fun and joy to millions of people all around the world. We Create to Inspire!
The Ride Control Systems Engineer will report to the Executive Ride Control Systems Engineer.
This is a full time role.
What You Will Do:
- Manage entire scope to conceive, design, & deliver control systems for a wide variety of complex and innovative ride systems and related equipment
- Conduct systems engineering for ride control systems
- Define system use cases and user needs
- Develop and capture requirements and functional specifications in documents, drawings, and models
- Ensure compliance with control system safety standards
- Perform engineering design and analysis for ride control systems
- Develop control strategies and algorithms
- Research new products, technologies, and methodologies
- Design, model, and analyze control systems, data communication, and dynamic systems
- Collaborate with other design and engineering professionals to implement ride control systems
- Develop implementation plans and budgets
- Develop and implement mock-ups and prototypes for proof-of concept efforts
- Develop test requirements and documents, and lead testing efforts
Required Qualifications & Skills
- 5+ years experienced in fail-safe and safety-related control system design
- Extensive knowledge of control processors, components, and communication networks
- Highly proficient in industrial control system installation, integration, and commissioning
- Solid understanding of communication protocols: TCP/IP, CAN, serial, ProfiNET, Ethernet/IP, EtherCAT
- Experience with requirements management, test plans/procedures, and test execution
- Demonstrated practice in functional safety standards, including IEC 61508, IEC 62061, ISO 13849
- Familiarity with amusement and automation industry standards, including ASTM F2291
- Solid skills in technical document writing
- Ability to travel domestically and internationally for 1-week to 3-year durations
- Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities
Preferred Qualifications & Skills
- Proficient with engineering design tools, including AutoCAD, Matlab, Simulink, Solidworks
- Proficient in Rockwell and Siemens automation systems architecture and components
- Expertise in motor and motion control methods and components
- Knowledge of pneumatic controls and devices
- Experience in broad application of control system theory (closed-loop control, MIMO systems, positioning and navigation)
- Knowledge of international amusement industry standards applicable in France, Hong Kong, or China
Education
- As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university, Electrical Engineering preferred
Additional Information:
- Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities and special extras that only Disney can provide. Learn more about our benefits and perks at DXMedia
The hiring range for this position in California is $123,300 to $200,300 per year. The base pay actually offered will take into account internal equity and also may vary
depending on the candidate’s geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
About the Role & Team
Walt Disney Imagineering is the creative force that imagines, designs, and brings to life all Disney theme parks, resorts, attractions, and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science, and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe.
Nearly every project at Walt Disney Imagineering includes a first-of-its-kind. Innovation is in our DNA, and Imagineers constantly push the boundaries of technology and invent new goals as well as the solutions to achieve them. As Imagineers, one of our greatest rewards is knowing that the experiences and environments we create inspire others. The diversity of expertise at Imagineering makes us uniquely capable of influencing positive change in our communities and around the world. And knowing that we have helped make a difference is incredibly fulfilling and inspiring for all of us.
Are you an OT or ICS engineer who has an interest and aptitude for network design and cyber security?
As a Ride Control Systems Security Engineer you will work within Walt Disney Imagineering’s Ride Studio on multiple ride attraction projects and are responsible for network architecture and cyber security design and implementation activities on new ride projects for installation in all our parks across the globe. Join us in a highly collaborative and self-directed atmosphere to lead efforts applying leading edge network technology on Disney rides!
You will report to the Ride Controls Systems Engineering Executive
This is a full time role.
What You Will Do:
- Lead Operational Technology (OT)/ Industrial Control Systems (ICS) network architecture and cyber security systems development, design, and implementation for automation and embedded control systems on a wide variety of large-scale, highly complex, and innovative ride systems
- Perform engineering design and analysis for ride system networks, with focus on automation system architecture
- Design and test cyber security solutions and network architectures for ride systems
- Design, model, and analyze data network communication systems
- Research and test new products, technologies, and methodologies and conduct trade-off studies
- Prepare and propose new cyber security and network architecture concepts and standards
- Lead standards and policies development for ride control network and cyber security architectures
- Collaborate with and support project teams on network requirements, implementation, and issues
- Collaborate with attraction development teams to design and deliver ride networks
- Develop and analyze OT network performance requirements for high availability real-time system
- Develop and capture requirements and functional specifications in documents, drawings, and models
- Develop implementation plans and budgets for ride control network systems
- Develop and implement mock-ups and prototypes for proof-of concept efforts
- Develop test requirements and documents and conduct ride network installation/commissioning efforts
Required Qualifications & Skills
- At least 3 years of experience with design, engineering, installation, and commissioning of highly networked automation, process control, and industrial control systems
- At least 3 years of experience in network systems design, installation and configuration
- At least 3 years of experience with Linux and Windows system administration experience
- Demonstrated experience in network design and analysis approaches to ensure and balance network availability, performance, resiliency and security
- Knowledge of wired and short-range wireless communication networks used in high availability industrial and embedded applications
- Solid understanding of communication technologies/protocols: TCP/IP, CAN, Serial, ProfiNET, Ethernet/IP, EtherCAT, 802.11
- Demonstrated experience in wireless communications for control and monitoring high-availability safety critical systems
- Demonstrated experience evaluating and remediating network and system vulnerabilities
- Demonstrated experience with cyber security technologies including firewalls, endpoint security solutions, VPNs, network security monitoring and detection, and security information and event management (SIEM).
- Solid skills in technical document writing
- Ability to travel and work both domestically and internationally, for varying durations that could be up to 3 months
- Ability to handle multiple complex efforts simultaneously, coordinate team efforts, and manage tasks and priorities
- Ability to maintain knowledge of constantly changing network and cyber security concerns in OT/ICS systems
Preferred Qualifications and Skills
- Proficient in Rockwell and/or Siemens automation systems architecture and components
- Experienced in fail-safe and safety-related system design and analysis
- Experience with multitasking software platforms and design approaches
- Experience with wired and wireless network design and configuration
- Experience with firewalls, VPNs, network security monitoring, and vulnerability assessment tools
- Knowledge of software configuration management/version control tools
- Cisco, GIAC, CompTIA or other relevant network and cyber security certifications strongly preferred
Education
- As a minimum a Bachelor of Science Degree in engineering, computer science, or related field from an accredited university required; Electrical Engineering preferred
Additional Information:
- Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at
#DXmedia
The hiring range for this position in California is $129,300 to $173,300. The base pay actually offered will take into account internal equity and also may vary depending on the candidate’s geographic region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
Our customers’ system requirements are usually highly complex. Bringing together hardware and software systems design, Systems Development Engineering operates at the very cutting edge of technology to meet them. We design and develop electronic and electro-mechanical or systems-orientated products, conduct feasibility studies on engineering proposals and prepare installation, operation and maintenance specifications and instructions. We’re proud to deliver programs and products to the highest quality standards, on time and within budget.
Join us to do the best work of your career and make a profound social impact as a Principal Systems Development Engineer on our Solutions/Server Performance Analysis team in Round Rock, Texas .
What you’ll achieve
As a Principal Systems Development Engineer, you will design, define and implement complex system requirements for customers and prepare studies and analyses of existing systems.
You will:
Perform the measurement and analysis of subsystem performance for Dell products, with an emphasis on the server subsystem: processor configurations, chipsets, memory subsystems.
Perform targeted studies to obtain optimal performance of a given solution (hardware and software configuration), write technical reports/whitepapers that summarize the solution's performance and isolate issues (bottlenecks) in the solution and obtain assistance from peers, or internal/external teams to eliminate or mitigate these bottlenecks
Review future designs for possible bottlenecks; work with engineering to consider changes where performance could be negatively impacted by design decisions.
Maintain a broad knowledge of performance bottlenecks and potential performance impacts on the various benchmarks being tracked by the performance team and work with the performance architects to provide raw data to facilitate performance predictions on new products.
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
8 to 12 years of related experience with a bachelor’s degree or 6+ years with a master’s degree
Experience in performance engineering, AI/ML systems, HPC, data center platforms, or accelerator‑based computing
Advanced understanding of appropriate system architectures
Deep knowledge of hardware and software interactions, and the ability to apply this understanding to resolve issues
Ability to lead technical initiatives and mentor team members
Desirable Requirements
Experience with MLPerf Training/Inference performance measurement
Knowledge of distributed training frameworks such as NCCL, RCCL, MPI, and large‑scale cluster architecture
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for this position is $157,250.00 - $203,500.00.
Benefits and Perks of Working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R286659
Join us to do the best work of your career and make a profound social impact as a Senior Principal Data Security Software Engineer on our Software Engineering Team. This is an on-site position in Austin, Texas (relocation available) or Hopkinton, Massachusetts (relocation available) or Santa Clara, California.
What you’ll achieve
As a Senior Principal Data Security Software Engineer, you will be responsible for developing common security related software that will be integrated into Dell’s server and storage products.
You will:
Contribute to the design and architecture of new or re-engineered cryptography security-related software/services
Implement modern encryption / decryption algorithms, crypto key management system and work on the Post Quantum Computing (PQC) model integration
Directly collaborate with best-in-class storage solution engineers at Dell Technologies
Build and review design, functional, technical and user documentation; develop, review and implement test strategies for software products and systems
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
12+ years experience (or equivalent skill) coding protocols and low-level systems in C
Significant experience with cryptography security-related software/services
Strong knowledge of Federal Information Processing Standards (FIPS), Post Quantum Cryptography (PQC), Commercial National Security Algorithm (CNSA) Suite 2.0 and CNSS Policy 15
Understanding of Transport Layer Security (TLS) and Key Management/Data At Rest Encryption (DARE)
Excellent collaboration and leadership skills and readiness to work with international development teams
Compensation
Dell is committed to fair and equitable compensation practices. The base salary range for this position is $205,500-$310,200
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R286170
Join us to do the best work of your career and make a profound social impact as a Principal Software Engineer on our Software Engineering Team in Hopkinton, Massachusetts .
What you’ll achieve
We build enterprise-grade, massively scalable cluster-based storage systems running across Linux and BSD. Our portfolio includes a multi-petabyte S3 object store and a scale-out NAS platform. We’re a modern, scrum-based engineering org that ships with high velocity and quality, using the best tools, hardware, and practices.
As a Software Engineer, you will contribute to our platform stack, the foundation upon which these products are built. Help us decide where your strengths best fit as you onboard. If you can explain how and where you’ll add outsized value in a distributed storage architecture, we want to talk.
You will:
Manage platform engineering development/test environments to support platform performance testing, customer failure replication, network configuration and hardware component qualification
Debug product networking issues
Maintain system settings and security adherence including BIOS, firmware and OS components
Load, configure, test and support unstructured storage appliance clusters
Qualify hardware components (drives, cables, etc.), firmware and/or software
Assist in physical install and set up hardware in Massachusetts development and testing environments (Hopkinton and Franklin)
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
Demonstrable working proficiency with Cisco-style Layer 2 switch configuration, troubleshooting, and root cause analysis
Demonstrable working proficiency with Linux OS installation/deployment, configuration, troubleshooting, and root cause analysis (SUSE a plus)
Proficiency with bare-metal server hardware environments at scale, and remote platform management concepts (IPMI, PXE)
Familiarity with updating system components (BIOS, Firmware, OS)
Scripting experience (Python preferred)
Desirable Requirements
Network configuration expertise (Layer 3 GbE)
Network configuration expertise (Infiniband)
Exposure to Ubuntu Linux, Cumulus Linux, and/or FreeBSD
Experience with fault tolerant and highly available systems
Drive (HDD and SSD) experience
Ability to analyze information and draw accurate conclusions
Solid knowledge and application of engineering concepts
Knowledge of Intel based architecture
8+ years of related experience with a Bachelor’s degree; or 5+ years with a Master’s degree; or a PhD without experience; or equivalent experience
Compensation
Dell is committed to fair and equitable compensation practices. The base salary range for this position: $178,500 to $230,000
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member - right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R285857
Join us to do the best work of your career and make a profound social impact as a Systems Engineer on our Platform Engineering Team in Hopkinton, MA.
What you’ll achieve
We build enterprise-grade, massively scalable cluster-based storage systems running across Linux and BSD. Our portfolio includes a multi-petabyte S3 object store and a scale-out NAS platform. We’re a modern, scrum-based engineering org that ships with high velocity and quality, using the best tools, hardware, and practices.
As a Systems Engineer, you will contribute to building a best-in-class platform stack, the foundation upon which these products are built.
You will:
Support the hardware architecture team to deliver a complex storage appliance with the highest quality and best in class features
Work cross-functionally to track, manage and close design issues for both new product introductions (NPI) and in-market (IM) activities
Qualify hardware components (Drives, DIMMs, cables, switches, etc.), firmware and/or software
Load, configure, test and support unstructured storage appliance clusters
Support platform engineering development/test environments to support platform performance testing, customer failure replication, network configuration and hardware component qualification
Assist in physical installation and setup hardware in Massachusetts development and testing environments (Hopkinton and Franklin)
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Desirable Requirements
Knowledge of Intel based architecture
Knowledge of hard drive, SSD, DIMM and/or other storage devices
Proficiency in hardware, software and/or operating systems environments
Networking experience
Proficiency in at least one of C/C++ , Java , or Python ; willingness to learn across the stack.
2+ years of related experience with a bachelor’s degree; or an advanced degree without experience; or equivalent experience
Compensation
Dell is committed to fair and equitable compensation practices.
The salary range for the Software Engineer position is 130K to 155K
(Note compensation may vary depending on location)
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member - right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R285888
