Assembly Machine Language Jobs in Usa

• Prepare and set up multiple work centers, ensuring initial parts meet Quality Assurance specifications.
• Set up numerical control machines or machining centers to perform functions such as cutting, drilling, milling, reaming, boring, and broaching.
• Mount, align, and secure tooling attachments and workpieces.
• Select and install cutting tools in machine spindles.
• Load control media or enter commands to retrieve preprogrammed instructions from the database.
• Operate CNC Avenger 200T, 850 X, and Orbitform Assembly Machines.
• Diagnose and troubleshoot issues in multiple work centers.
• Operate equipment through trial runs to verify setups and make necessary adjustments.
• Monitor displays and machine operations to detect malfunctions and resolve issues promptly.
• Enter commands or manually adjust machine controls to correct malfunctions or out-of-tolerance machining.
• Coordinate activities for operators and conduct on-the-job training for new operators.
• Instruct equipment operators and maintenance personnel on setup, operation, and maintenance of equipment.
• Perform preventive maintenance and minor repairs on machines as needed.
• Calculate and set machine controls to regulate factors such as cutting depth, speed, feed, and coolant flow.
• Stop machines to change cutting tools and setups as required by the machining sequence.
• Measure parts for conformance to blueprint specifications using precision measuring instruments.
• Discuss control media errors with programming personnel to resolve problems.
• Perform other customer-driven or product-driven duties as assigned by the supervisor.

• High school diploma or GED required.

• 3 to 5 years of experience in CNC and assembly machine operations.

• Knowledge of computer systems and hard gauging measuring equipment.
• Strong understanding of mechanical manufacturing processes and production tools.
• Ability to read tooling prints and perform mathematical calculations related to machining.
• Background in CNC programming.
• Familiarity with software packages relevant to machining operations.
• Attention to detail and troubleshooting aptitude.
• Strong communication, organizational, and people skills.
• Conceptual thinking and mechanical aptitude.

• Good vision and adequate hearing.
• Ability to lift light loads (10-20 lbs daily) and heavier loads (50-60 lbs occasionally).
• Manual dexterity and coordination.
• Mobility for bending and kneeling as required.

• Competitive base rate - $22.00-$32.20/ hour depending on experience.15% shift differential.
• Medical/Prescription Drug/Dental/Vision Benefits on Day 1 of employment
• 401(k) Retirement Savings Plan
  • 4.5% company match if you contribute at least 5%
• Quarterly Bonus potential
• Paid Time Off (PTO)
• 8 company paid holidays per year
• Employer paid Life Insurance, AD & D plus optional coverage for yourself, spouse and child(ren)
• Employee Assistance Program
• MN Paid Leave/and/or Short-Term Disability provided by ARCH
• $1,000 Sign on Bonus

• Inspects products during the machining operation to determine if parts meet specifications, complying with established standards and methods for inspection, testing, evaluation and calibration
• Follow all job work order instructions
• Must be able to run more than one machine where cycle time permits
• Complete all required shop floor documentation for the job including both part-dimensional and visual inspection
• Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; reports to management/maintenance the need for machine repairs
• Understands and comply with company policy safety guidelines, quality systems requirements and housekeeping standards

• High school diploma or GED equivalent
• Due to contractual requirements, this position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

• Machine Tool Technology degree (completed or pursuing)
• A minimum of 1 years' experience operating a CNC Lathe machine
• Strong mechanical aptitude
• Ability to read and understand blueprints
• Strong attention to detail
• Effective verbal and written communication skills

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Status:

Joining Collins Aerospace isn’t just about finding a job; it’s about embarking on a journey to redefine the future of aerospace technology.

Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market. 

Our Troy, OH site location has an immediate need for a Brake Assembly Operator responsible for assembly of brakes and component parts of brakes while operating nut runners, drill presses, power screw drivers, grinders, electric hand drills, burr guns, riveters and other tools as necessary and testing of assembled brakes.

2nd Shift: Monday - Friday 3PM - 11PM

What You Will Do

• Receive job assignments, piece quantity, and special instructions from the supervisor.

• Read standard operating procedures and operating sheets.

• Clean, wipe, and sand parts as necessary.

• Set torque wrenches and assemble brakes and their components.

• Test brakes, rework brakes with leaks, and replace lee plugs as needed.

• Stamp information on tags or pads and notify the supervisor of stock needs or machine problems.

• Record transactions and quality data; report machine or process issues to the supervisor.

• Check parts against the pick list and set up riveters as required.

• Torque all applications as required.

• Retrieve parts from the warehouse and store/retrieve brake components, maintaining current inventory records.

• Prepare brakes and brake components for shipment, including packaging, counting, weighing, labeling, and completing paperwork.

• Move materials between workstations and cells using hand trucks, hoists, or robot assistance.

• Set aside discrepant parts.

• Clean and maintain work areas, machines, auxiliary equipment, and common areas to ensure a clean, safe, and orderly environment.

• Check and maintain operating levels of fluids and required machine materials.

• Mask and plug parts as needed and touch up paint as required.

• Attend training classes and cell meetings, and perform miscellaneous operations as assigned in support of Brake Assembly.

• You will be required to perform mathematical calculations requiring addition, subtraction, multiplication or division and pass a pre-employment qualification test.

• You will be required to perform substantial reaching and moving while standing, twisting; stooping; and be response to sounds associated to the work environment.

• You will be required to lift to 25 lbs. unassisted, anything over 25 lbs. would be assisted.

• You will be required to wear personal protective equipment as required. 

•  You will be required to adhere to all EH&S roles and responsibilities as stated in manufacturing work instructions and EHS policies and procedures.

Qualifications You Must Have

• Typically Requires a HS Diploma or a GED

• Minimum of 1 year CNC machining experience or minimum of 2 years manufacturing experience.

• Experience working with technical documents (including any of the following: routings, blueprints, Engineering process specifications, written work instructions.)

What We Offer

Some of our competitive benefits package includes:   

• Medical, dental, and vision insurance  

• Paid time off after 121 days

• Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option  

• Tuition reimbursement program 

• Student Loan Repayment Program  

• Life insurance and disability coverage  

• Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection 

• Birth, adoption, leave benefits 

• Ovia Health, fertility, and family planning  

• Adoption Assistance           

• Autism Benefit  

• Employee Assistance Plan, including up to 10 free counseling sessions  

• Healthy You Incentives, wellness rewards program 

• Doctor on Demand, virtual doctor visits  

• Bright Horizons, child and elder care services 

• Teladoc Medical Experts, second opinion program  

•  And more!  

Learn More & Apply Now!​

Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement – we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us!  

*Please ensure the role type (defined below) is appropriate for your needs before applying to this role.

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. 

This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40. (Confirm Safety Sensitive Role) 

At Collins, the paths we pave together lead to limitless possibility. And the bonds we form – with our customers and with each other -- propel us all higher, again and again.  

Apply now and be part of the team that’s redefining aerospace, every day.

Employee Referral Eligible 

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Machine Repair Mechanic to join our Equipment Services team in various locations across Washington State.

As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount. You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment. Your commitment to safety will be reflected in your adherence to SHEA regulations and best practices while guiding and mentoring team members.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.
• Conduct preventative maintenance inspections on stationary generator sets and other equipment.
• Ensure compliance with SHEA regulations while performing all tasks.
• Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.
• Utilize schematics, blueprints, specifications, manuals, and applicable procedures to complete work assignments effectively.
• Develop assembly methods when procedures are not available, documenting these methods for future reference.
• Hand scrape, flake, lap, level, and align equipment components as needed.
• Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.
• Perform operational tests on machine tools and building equipment to ensure functionality.
• Maintain logs, charts, and records, preparing reports and schedules as required.
• Conduct preventive and predictive maintenance inspections to ensure equipment reliability.
• Collaborate with other crafts to accomplish tasks and assist as needed.
• Perform incidental rigging to facilitate work tasks.
• Carry out work in other classifications when necessary to complete assignments.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• 3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).
• Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.

Preferred Qualifications:

• Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.
• Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
• Ability to work around electromagnetic fields because of various types of production equipment.

Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $46.00/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 03, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Machine Builder – 3 Openings (2 Integration, 1 Sub‑Assembly)

Location: Clinton Township, MI

Schedule: Full-time, Onsite

Type: Long-Term Contract

Requirements: Must pass drug screen and background check

About the Role

We are seeking skilled Mechanical Machine Builders—2 Integration Builders and 1 Sub‑Assembly Builder—to join our team supporting automotive equipment build and installation projects. This role requires the ability to work independently with minimal supervision while delivering high‑quality workmanship.

Key Responsibilities

• Perform mechanical integration and sub‑assembly work for automotive OEM projects (Chrysler, Ford, GM).
• Work independently on medium-complexity mechanical build projects.
• Follow equipment installation through all phases, from in-house build to customer-site installation.
• Assist the project team in resolving technical issues or build concerns.
• Read and interpret blueprints, mechanical drawings, and BOMs.
• Update and submit weekly E‑BOM summaries to the Mechanical Supervisor.
• Verify all parts and assemblies conform to specifications and engineering documentation.
• Maintain project schedules, track open issues, and meet deadlines.
• Follow all safety, environmental, and quality system procedures.
• Maintain a clean, organized work area.
• Utilize rigging and crane equipment safely and effectively.
• Perform basic welding as required.
• Provide and maintain own tools and PPE.

Qualifications

• Education: One-year certificate from a college or technical school; or
• 5 years of related mechanical assembly experience; or
• Equivalent combination of education and experience.
• Strong understanding of automotive industry build practices.
• Proficient with standard mechanical tools, rigging, and overhead cranes.
• Ability to work with minimal supervision while maintaining high-quality output.
• Reliable, consistent, and punctual attendance is essential.

Additional Details

• This role requires 100% onsite work.
• Long-term contract opportunity with full-time hours.
• Candidates must successfully pass drug screening and background checks.