Assembly Area Requirements Jobs in Usa

The Assembly Department Supervisor will perform the following duties and has the following experience and skill set:

Supervision of Assembly Operations: Lead and manage the assembly team, ensuring that all injection molded parts are properly assembled,

inspected, and ready for painting or coating. Ensure that assembly operations run smoothly, efficiently, and in compliance with established production schedules.

Quality Control & Standards: Maintain and enforce strict quality control processes throughout the assembly line. Ensure all parts meet Toyoda Gosei’s and customer specifications before advancing to painting/coating stages. Address and resolve any quality concerns promptly,

in collaboration with the quality assurance team.

Workplace Safety: Prioritize and enforce a culture of safety within the assembly area. Ensure that safety standards, procedures, and regulations are followed by all team members at all times, and that assembly-related work areas are properly maintained to prevent accidents and injuries.

Continuous Improvement: Foster an environment of continuous improvement within the assembly department. Collaborate with other teams to identify areas for efficiency improvements, waste reduction, and process optimization.

Participate in Lean, Six Sigma, and other initiatives to enhance the performance of the assembly line.

Training & Development: Oversee the training and development of assembly team members, ensuring they are well-versed in product specifications, assembly processes, safety practices, and quality standards. Promote a culture of teamwork, accountability, and skill growth.

Collaboration with Other Departments: Work closely with production planning, engineering, quality control, and logistics teams to ensure seamless transitions between the assembly, painting/coating, and shipment processes. Coordinate with the shipping department to ensure timely and accurate delivery of completed parts to customers.

Performance Metrics: Monitor and report on key performance indicators (KPIs) related to assembly throughput, quality rates, downtime, and other relevant metrics. Take proactive measures to meet or exceed production targets and maintain a high level of operational efficiency.

Toyoda Gosei is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton , Washington .

As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes. Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests. You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components. Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
• Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
• Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
• Load sealing guns and clean sealing equipment, ensuring proper functionality.
• Hand mix sealant as required and perform rework or pickups on assigned assemblies.
• Assist with pressure testing operations as assigned.
• Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
• Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
• Keep supervisors informed of progress and coordinate information with employees on other shifts.
• Mask areas as required to facilitate corrosion removal or painting operations.
• Prepare fuel vents for leak tests and restore them to normal after testing.
• Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
• Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications :

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Completed 1+ year of aerospace sealing in high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray A -Major Assemblies to join our Joint and Installation team in Everett and Renton, Washington.

As a Painter Spray A - Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft. Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish. You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements. Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment. Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.

• Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.

• Prepare surfaces to ensure proper adhesion, including corrosion removal and paint stripping as needed.

• Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.

• Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.

• Mask and unmask areas to facilitate corrosion removal or painting operations.

• Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.

• Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.

• Operate automated spray equipment, such as robots, for preparation and painting tasks.

• Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.

• Monitor and maintain time-sensitive materials and processes throughout the painting operation.

• Support customer inspections as required and screen work instructions to ensure proper workflow.

• Apply decals, part markings, and wrap finished parts or assemblies as required.

• Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.

• Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.

Basic Qualifications:

• 1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• 1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.

• 1+ years of experience mixing paints.

• 1+ years experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• 1+ years of experience handling chemicals and/or hazardous materials

• Experience working from heights & using fall protection equipment with weight limitations.

Preferred Qualifications:

• 1+ year of experience performing aircraft or autobody painting and finishing operations.

• Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.  

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities: 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:  

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

This position offers relocation based on candidate eligibility. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift:  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is looking for Senior Quality Workplace Coaches to join the Composite Manufacturing Center based out of Renton, Washington .

Our team is currently hiring for a broad range of experienced levels, including Experienced and Senior Quality Workplace Coaches.

The QWPC team is looking for enthusiastic Quality Workplace Coaches who are passionate about motivating and inspiring others. In this role, you will support quality inspectors and manage Structured On-The-Job activities. Ideal candidates will be Subject Matter Experts (SMEs) in inspection methods and quality processes, with hands-on experience and proficiency in Non-Conformance Record (NCR) writing. Strong collaboration, coaching, and leadership skills are essential, along with a genuine ability to connect with others. Our motto is, “We Make People Awesome.” We offer a collaborative culture with flexible scheduling, minimal overtime, and lower physical demands.

Position Responsibilities:

• Able to coach Quality inspectors on best practices in inspection techniques and performance improvement, utilizing expertise in quality manufacturing and assembly across various areas such as Structures, Seal, Flightline processes, Functional Test, Wings, Interiors, Electrical, WIRS, NCR Tag Writing, Hydraulics, Engines, Paint, Systems, Final Assembly, Plumbing and PDD (including but not limited to REDARS, PSDS, ONEPPPM, D Documents Navigation), to enhance coaching, performance improvement, and problem solving in support of the Boeing Production System

• Analyzes and interprets performance and quality data (e.g. CMES, PAS, EPES, TMC) to identify improvement opportunities

• Analyzes processes and supports problem solving, develops, communicates and documents innovative solutions in support of area quality goals

• Assists Quality managers and team leads with Structured On-the-Job Training (SOJT) plans and provides program/job specific advanced skills coaching

• Offers Subject Matter Expertise for specific Quality skills through Workplace Coaching

• Provides coaching, positive modeling, and observation opportunities to help team members excel

• Encourages questions to ensure understanding and gives timely feedback on performance

• Reinforces efforts and progress while clarifying expected behaviors, knowledge, and proficiency levels

• Fosters good interpersonal relationships through helping team members feel valued, appreciated and included in discussions

Basic Qualifications (Required Skills/Experience):

• 5+ years of experience in manufacturing operations, quality, or other related field

• 5+ years of experience in quality inspection and/or auditing

• 5+ years of experience working or inspecting non-conformance work orders

• 2+ years of experience mentoring, coaching, guiding, and leading teams

Preferred Qualifications (Desired Skills/Experience):

• 10 + years of related work experience or an equivalent combination of education and experience

• Quality inspection experience in three or more of these areas: Quality inspection in Structures, Seal, Flightline processes, Functional Test, Wings, Interiors, Electrical, WIRS, NCR Tag Writing, Hydraulics, Engines, Paint, Systems, Final Assembly, Plumbing and PDD (including but not limited to REDARS, PSDS, ONEPPPM, D Documents Navigation), to enhance coaching, performance improvement, and problem solving in support of the Boeing Production System

• Proficiency with MS Office applications

• Excellent analytical, communication and problem-solving skills

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This position is for 1st and/or 2nd shift.

Total Rewards:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Experienced (Level 3): $103,000 - $125,000

Senior (Level 4): $126,000 - $154,000

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This is not an Export Control position.

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Location: Auburn Hills, MI

Position: Long Term Contract (Possible Extension)

Title: 26-00326 - Manufacturing Process Engineer – BIW / General Assembly (Bilingual Spanish & English Required)

Job Description:

• Vehicle Process Engineer Specialist (Toluca Vehicles) will create, updating and maintenance of process documents that affect the current and new vehicle program(s) project(s) and includes working in different process areas BIW and General Assembly.

Responsibilities:

• Vehicle Process Engineer must be able to perform studies for assembly processes, process documents creation includes graphics & illustrations of the parts to be assembled and its development contains the identification of assembly risks through the use and implementation of Process Failure Mode and Effects Analysis (PFMEA) on current and new products. The previous activities includes the sequence analysis to install parts, the implementation of product and parts engineering specifications, process tools specifications, digital process simulation studies and interferences analysis related to current and new products parts and assemblies, as well as any other study related to required process, it will be performed under the acknowledgment and use of the following software applications: Teamcenter 11, Siemens NX (NX Unigraphics software), Mockup and Vis-Professional Version 14.1 visualizers, MS Visio 2016, Autodesk DWG TrueView 2019, MS PowerPoint and MS Office 2016, Snipping Tool Version 10, AMPS - Advanced Manufacturing Planning Systems (Client Internal System). These computer software applications will be used to define process and identify in advance any potential process risk with the use of PFMEA technique to ensure the correct integration of processes on time, in a safety matter and in accordance with product specifications.
• As part of Process Failure Mode and Effects Analysis (PFMEA) development, Vehicle Process Engineer will generate the initial list of PFMEAs to be carried out according to the new processes requirements. The definition of PFMEAs will be performed in mutual agreement with VPE Cars, WPI (Work Process Integration) and plant team members. Once the matrix of PFMEAs to be generated has been defined, Process Engineer will be responsible to schedule meetings in mutual agreement with VPE and plant, develop and lead the PFMEAs. For the creation of PFMEA it will be required to populate the process steps on the PFMEA form provided by VPE Cars /WPI, which includes process steps, identifying potential process risks, establishment of severity, occurrence and detection values, establishment of recommended actions, assignment of responsible for each created recommended action, creation of summary reports after each PFMEA review and document posting into WPI web. It also includes the follow-up of open recommended actions with responsible(s) up to which all the actions will be closed as well.
• Vehicle Process Engineer will be responsible to perform the new and update process documents for the current and new vehicle product programs produced by Toluca Plant, it includes all product parts end items, parts change last level released by product engineering that may affect the process(es) and the inclusion of the changes into the processes should be done considering the product implementation date specified in the engineering change Vehicle Process Engineer will be able to understand the product specifications included in the Engineering Bill of Material (EBOM) system, Product Change Notes (CNs) and Engineering Bulletins.
• It is expected after being familiar with the product specifications, Client systems use and process document requirements that the Vehicle Process Engineer will develop a new process page under the rate of 30 minutes and meet the quality required. If the process or PFMEA's documents performed by Vehicle Process Engineer contain mistakes or missing information, the time used to fix the errors and meet the quality requirements will be covered by Engineering Services.
• Vehicle Process Engineer will provide these services considering performing in the different process areas BIW and GA process areas, work under pressure, availability to travel, assistance on weekends and sometime holidays.
• Vehicle Process Engineer is responsible to keep the information managed updated, control the changes, and manage the process documents assigned as well as have them available into the corresponding systems indicated in accordance with the vehicle(s) program(s) needs established by IME/ME. The confidentiality of the documents generated must be maintained across all the vehicle programs and assigned projects.
• Assist the VPE Cars engineers in the generation of process documents, graphics and PFMEAs, as well as during the revision and updating of these documents.
• Support to VPE Cars engineers in the presentation required to identify the process and product changes related or any activity related to new models as well as to current vehicles (carry over).
• Assist to obtain the product specification, parts and plant information required by VPE Cars Process in order to develop the process documents, Graphics, PFMEA's and tasks needed due to product changes, plant request to improve or update the process documents during the implementation of new and carry over vehicles. The supplier personnel should follow the confidentiality policy.
• Engineering services must be following the official Mexican norms and regulations applicable to the processes safety, environmental that are considered into Product Specifications (Process Standards, Material Standards and Quality MQAS Mexico Client during the work assigned to supplier in the process areas and the plant location.
• Support parts and vehicle(s) model data finding in Teamcenter requested by IME in order to develop and update the new and current process documents, graphics and PFMEA's.
• Assist to obtain information to develop and follow up vehicle(s) KPI's, create weekly reports and support any task related to process documents, it will be performed using forms and tools from VPE and Program Vehicle(s) Management.

Requirements:

• Teamcenter 14
• Siemens NX
• VisPro 14.1
• AutoCAD
• MS Visio
• MS Office / PowerPoint
• AMPS Client
• PFMEA basic template
• EBOM Client
• CN's Client

Education / Training:

• Engineering Degree Required
• Speak and Write Spanish and English
• 2 years as minimum experience in manufacturing process, operation plants, a variety of manufacturing engineering.

Senior Director of Warehousing & Assembly Operations

About the Role

This is a rare opportunity to step into a highly visible leadership role within a successful and growing organization. Dimora Brands continues to expand its footprint, product offerings, and operational capabilities, creating meaningful opportunities for leaders who want to make a lasting impact. The Senior Director of Warehousing & Assembly will lead high-performing teams across a multi-site network. This role offers the ability to directly influence strategy, drive measurable operational improvements, and implement transformative change across the company. For an ambitious operations leader, this position provides significant exposure, executive partnership, and clear opportunities for continued advancement within a thriving organization.

About Dimora Brands

Dimora Brands is the parent company of industry-leading brands including Hardware Resources, Top Knobs, Wolf Home Products, Atlas Homewares, and Task Lighting. Across our portfolio, we design, engineer, manufacture, and distribute decorative and functional hardware, cabinet organizers, cabinets, wood products, and LED lighting solutions.

We proudly stock over 24,000 SKUs and ship same-day from strategically located distribution centers nationwide. Our success is driven by operational excellence, hard work, and a strong commitment to serving manufacturing, showroom, wholesale, retail, and e-commerce customers. At Dimora Brands, we foster a high-performance, team-oriented culture where leaders are empowered to build, innovate, and drive meaningful impact.

Position Summary

The Senior Director of Warehousing & Assembly is a network-wide operations leader responsible for the strategic direction, performance, and continuous improvement of:

• Hardware Resources (warehouse functions/ cabinet assembly)
• Top Knobs warehouse network
• Task Lighting Operations (assembly/warehouse functions)

This role leads a multi-site distribution and assembly network and is accountable for driving operational excellence across Safety, Quality, Delivery, Cost, and Talent. The Senior Director ensures standardized processes, consistent execution, strong financial performance, and best-in-class customer service across all facilities. The Senior Director will take well-established, well-functioning operations and engage in continuous improvement to strive for excellence in all key areas.

This leader will function as a change agent, building high-performing teams, implementing standardized operating procedures (SOPs), and driving Lean process improvements across the network. This role requires a strong cross-functional partnership with Sales, Customer Service, Product Quality, Logistics, Supply Chain, and Executive Leadership to ensure operational alignment and customer satisfaction.

Key Responsibilities

Network Operations Leadership

• Provide strategic and operational leadership for all Dimora Brands warehousing/cabinet assembly and Task Lighting assembly operations.
• Lead and develop DC Managers and site leadership teams.
• Ensure all facilities are staffed, trained, equipped, and operating within company guidelines and performance expectations.
• Serve as escalation point for operational performance gaps and customer service issues.

Performance & KPI Accountability

• Drive execution across all key performance metrics:
• Safety
• Quality
• Delivery / Service Levels
• Cost Management
• Talent Development
• Establish and monitor standardized scorecards across all sites.
• Identify performance gaps and implement corrective action plans with urgency and accountability.
• Own and manage regional operating budgets, capital planning, and cost control initiatives.

Scope

• Leads 10+ locations across the US
• Reports directly to the COO
• Manages a team of 225+ direct and indirect reports

Process Standardization & Continuous Improvement

• Lead the development, deployment, and compliance of standardized SOPs, playbooks, and best practices across all warehouse and assembly sites.
• Drive Lean leadership principles and structured problem-solving processes to eliminate waste and improve productivity.
• Lead focused improvement events and cross-functional initiatives.
• Ensure strong audit processes are in place to maintain operational discipline and process consistency.

Assembly & Value-Added Operations (Task Lighting and NorthPoint Cabinetry)

• Oversee assembly/manufacturing workflows to ensure quality, throughput, and efficiency targets are met.
• Partner with Product Quality and Engineering to ensure product standards and compliance.
• Optimize labor planning, workflow design, and material flow to support scalable growth.

Talent Development & Organizational Leadership

• Build and sustain a high-performance culture across all distribution and assembly operations.
• Assess training and development needs across the network.
• Coach and mentor warehouse and operations leaders; develop a strong leadership pipeline.
• Identify high-potential talent and create succession planning strategies.
• Foster a culture of accountability, collaboration, and continuous improvement.

Cross-Functional Collaboration

• Partner closely with Sales to ensure customer expectations and service requirements are met.
• Collaborate with Customer Service to quickly resolve order processing errors and service disruptions.
• Collaborate with Supply Chain, Logistics, and Product Quality to ensure seamless operational flow.
• Communicate disruptions, risks, and opportunities to Executive leadership in a timely and solutions-oriented manner.

Network Optimization & Growth Support

• Support new program launches, warehouse expansions, and facility relocations.
• Evaluate network capacity and scalability to support business growth.
• Lead technology adoption and warehouse systems improvements.
• Provide operational leadership during times of transition or leadership gaps within facilities.

What Success Looks Like

• A standardized, high-performing warehouse and assembly network operating with consistency and discipline.
• Strong safety record and compliance across all facilities.
• Improved service levels and reduced order errors.
• Measurable cost efficiencies and productivity gains.
• Engaged, developed leadership teams with a clear succession pipeline.
• A culture of urgency, accountability, and continuous improvement.

Qualifications

Experience

• 10+ years of progressive leadership experience in warehouse, distribution, logistics, and/or light manufacturing/assembly operations.
• Minimum 5+ years leading multiple sites with demonstrated success driving measurable performance improvement.
• Experience implementing Lean methodologies and structured problem-solving processes preferred.
• Proven success managing budgets and driving cost optimization initiatives.

Education

• Bachelor’s degree in Supply Chain, Logistics, Business, Operations Management, or related field required.
• MBA or advanced degree a plus.

Skills & Competencies

• Strong leadership presence and leadership capability.
• Demonstrated ability to lead through change across geographically dispersed teams.
• Deep understanding of inventory control, order processing, shipping systems, and warehouse technology.
• Strong financial acumen and data-driven decision-making skills.
• Lead by example work ethic
• Excellent communication and relationship management skills across multiple organizational levels.
• Highly organized and effective in fast-paced, multi-time-zone environments.

Additional Information

• Based at a Dimora Brands location (Dallas, Bossier, or Branchburg preferred).
• Regular travel to distribution and assembly facilities (approximately 25–40% domestic travel).
• Must conduct all company affairs in a professional and ethical manner.
• Post-offer background check and drug screen required.

FUNCTION:

In an assigned area or cell, work with limited supervision to perform the assembly of Production aircraft parts as well as the teardown, and assembly of Overhaul & Repair designated aircraft parts.

TYPICAL DUTIES:

• 
  
• Performs fitting and assembly operations on various production aircraft parts.
  

• 
  
• Performs teardown and assembly of overhaul & repair aircraft parts.
  

• 
  
• Cleans and applies special adhesives to materials resulting in a permanent bonding of the materials. Sets up and controls furnace temperature in accordance with established specifications.
  

• 
  
• Must be capable of reading and interpreting blueprints, operation sheets, technical specifications and overhaul manuals.
  

• 
  
• Maintains necessary records and files.
  

• 
  
• Works with limited supervision.
  

• 
  
• Assists operators in a lower classification on assembly techniques as needed.
  

• 
  
• Performs temporary part marking, In process transfer marking and final part parking operations using Vibro Engraving, Electro-chemical Etch, Ink Stamp, Dot-Peening, and Paint marking with suitable legibility to meet drawing or customer specification requirements
  

• 
  
• Works under supervision with salary and hourly support groups to address the most complex problems.
  

• 
  
• Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action.
  

• 
  
• Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements.
  

• 
  
• Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions.
  

• 
  
• May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.
  

This position is currently accepting applications.

Apply Now

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Status:

Joining Collins Aerospace isn’t just about finding a job; it’s about embarking on a journey to redefine the future of aerospace technology.

Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market. 

Our Troy, OH site location has an immediate need for a Brake Assembly Operator responsible for assembly of brakes and component parts of brakes while operating nut runners, drill presses, power screw drivers, grinders, electric hand drills, burr guns, riveters and other tools as necessary and testing of assembled brakes.

2nd Shift: Monday - Friday 3PM - 11PM

What You Will Do

• Receive job assignments, piece quantity, and special instructions from the supervisor.

• Read standard operating procedures and operating sheets.

• Clean, wipe, and sand parts as necessary.

• Set torque wrenches and assemble brakes and their components.

• Test brakes, rework brakes with leaks, and replace lee plugs as needed.

• Stamp information on tags or pads and notify the supervisor of stock needs or machine problems.

• Record transactions and quality data; report machine or process issues to the supervisor.

• Check parts against the pick list and set up riveters as required.

• Torque all applications as required.

• Retrieve parts from the warehouse and store/retrieve brake components, maintaining current inventory records.

• Prepare brakes and brake components for shipment, including packaging, counting, weighing, labeling, and completing paperwork.

• Move materials between workstations and cells using hand trucks, hoists, or robot assistance.

• Set aside discrepant parts.

• Clean and maintain work areas, machines, auxiliary equipment, and common areas to ensure a clean, safe, and orderly environment.

• Check and maintain operating levels of fluids and required machine materials.

• Mask and plug parts as needed and touch up paint as required.

• Attend training classes and cell meetings, and perform miscellaneous operations as assigned in support of Brake Assembly.

• You will be required to perform mathematical calculations requiring addition, subtraction, multiplication or division and pass a pre-employment qualification test.

• You will be required to perform substantial reaching and moving while standing, twisting; stooping; and be response to sounds associated to the work environment.

• You will be required to lift to 25 lbs. unassisted, anything over 25 lbs. would be assisted.

• You will be required to wear personal protective equipment as required. 

•  You will be required to adhere to all EH&S roles and responsibilities as stated in manufacturing work instructions and EHS policies and procedures.

Qualifications You Must Have

• Typically Requires a HS Diploma or a GED

• Minimum of 1 year CNC machining experience or minimum of 2 years manufacturing experience.

• Experience working with technical documents (including any of the following: routings, blueprints, Engineering process specifications, written work instructions.)

What We Offer

Some of our competitive benefits package includes:   

• Medical, dental, and vision insurance  

• Paid time off after 121 days

• Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option  

• Tuition reimbursement program 

• Student Loan Repayment Program  

• Life insurance and disability coverage  

• Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection 

• Birth, adoption, leave benefits 

• Ovia Health, fertility, and family planning  

• Adoption Assistance           

• Autism Benefit  

• Employee Assistance Plan, including up to 10 free counseling sessions  

• Healthy You Incentives, wellness rewards program 

• Doctor on Demand, virtual doctor visits  

• Bright Horizons, child and elder care services 

• Teladoc Medical Experts, second opinion program  

•  And more!  

Learn More & Apply Now!​

Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement – we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us!  

*Please ensure the role type (defined below) is appropriate for your needs before applying to this role.

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. 

This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40. (Confirm Safety Sensitive Role) 

At Collins, the paths we pave together lead to limitless possibility. And the bonds we form – with our customers and with each other -- propel us all higher, again and again.  

Apply now and be part of the team that’s redefining aerospace, every day.

Employee Referral Eligible 

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Opportunity: Manufacturing Engineer with Fameccanica North America in West Chester, OH

Why This Role

If you enjoy taking mechanical concepts from idea to prototype to build‑ready design, this role offers real ownership. As a Manufacturing Engineer at Fameccanica, you will design and develop mechanical components and assemblies for industrial automation machinery—working hands‑on with engineering, manufacturing, and project teams to deliver reliable, high‑quality solutions.

What You’ll Work On

• Design mechanical components and assemblies for assigned machinery
• Take concepts through detailed design, calculations, and validation
• Build working prototypes for testing and customer demonstration
• Create and review CAD drawings, plans, and technical specifications
• Balance performance, safety, cost, and delivery timelines in your designs

What Success Looks Like

• You take ownership of your designs from concept through release
• Your designs are practical, manufacturable, and meet real‑world constraints
• You collaborate easily across engineering, production, and project teams
• You enjoy solving problems and improving designs through iteration

What You Bring

• Bachelor’s degree in Manufacturing Engineering or related field
• Experience designing mechanical components or assemblies
• Proficiency with CAD tools and technical documentation
• Comfort performing engineering calculations and design validation
• A practical, hands‑on engineering mindset

About Fameccanica

Fameccanica North America designs and builds industrial automation solutions that help manufacturers improve production efficiency, quality, and reliability. Based in West Chester, Ohio, the team supports advanced machinery projects for global customers and operates with the backing of a well‑established international organization.

Interested?

If you’re looking for an engineering role where your work moves beyond drawings and into real machines, we’d like to talk. Apply online at or email or email !

Martinrea is a diversified global automotive supplier engaged in the design, development and manufacturing of metal parts, assemblies and modules, complex fluid management systems and aluminum products. We employ approximately 15,000 skilled and motivated people at manufacturing, engineering and technical centers in Canada, the United States, Mexico, Brazil, Germany, Slovakia, Spain, and China. Our business strategy leverages world-class technologies, motivated and talented people, and high-quality products.

Mission is to make people's lives better by:

Delivering outstanding quality products and services to our customers.

Providing meaningful opportunity, job satisfaction, and job security for our people.

Being positive contributors to our communities; and,

Providing superior long-term investment returns to our stakeholders.

Our strength is our people.

We invite you to explore a challenging and rewarding career at Martinrea in Tupelo, MS.

Benefits

Competitive Salary

Major Health Insurance Carrier

Dental Health Insurance

Vision Insurance

401K - match 50%

Short- and Long-term Disability

Required Qualifications:

• College diploma and/or combination of Grade 12 with minimum 3 years of hands-on
• Supervisory experience in a related field
• Good working knowledge of assembly, stamping and welding operations
• Excellent English Communication Skills (oral and written)
• Basic knowledge of computer skills
• Excellent organizational and time management skills
• Strong leadership and problem-solving skills
• Familiar with the Occupational Health and Safety Act and Regulations

Critical Success Factors:

• Excellent attendance
• Ability to work efficiently with minimum supervision and/or directions
• Ability to work in a team environment and be a team player and a team leader
• Strong leadership and interpersonal skills
• Excellent motivator and mentor
• Ability to maintain all production related records in an organized and tidy manner, use sound judgment in dispersing
• confidential information related to employee’s data
• Support and contribute to the Quality Systems and Environmental Management Systems Requirements
• Ensure that all duties and tasks are carried out in a safe and efficient manner and at no time is the employee or their
• co-workers placed in an unsafe condition

Responsibilities:

• Supervise the shift Team Leaders, Assembly Operators, Welders and the Forklift Operators
• for the department
• Ensure that product identification, traceability, process control, packaging instructions are being followed at all
• times
• Ensure all assembly personnel are following the Quality System and conform to quality standards
• Ensure all first off/last off procedures are being followed at all times
• Ensure LPA is performed as per schedule, follow up to close all outstanding issues within a reasonable time frame
• Responsible to train all personnel within the assembly department to meet company's target on productivity and efficiency and manage within the scheduled financial budget
• Oversee and maintain inventory levels of parts produced to meet scheduled targets
• Coordinate with other departments to ensure no unnecessary interruption of production requirements
• To train, develop, mentor, direct and discipline subordinates to ensure a productive, efficient and competent
• workforce to meet scheduled requirements in a safe environment
• Provide regular constructive feedback and communication to subordinates formally and informally on company policies, work procedures and work standards etc. and to ensure adherence to all policies and
• procedures at all times
• To make recommendation to Assembly Manager on the confirmation and/or disposition of employees within the probationary period
• Responsible for ensuring all training within the department is completed in a timely manner, documented and posted at each workstation. Provide on-the-job retraining as required.
• Assist in providing management reports and documentation of key measurable as required
• Maintain a system of communicating ongoing departmental performance to subordinates on a regular basis
• Ensure good housekeeping for the department and that all areas responsible are tidy and organized at all times
• Ensure subordinates follow Company policies on Health, Safety & Environment and PPE requirements
• Contribute to the continuous improvement initiatives on all aspects of the job and to encourage all subordinates to do
• the same

Martinrea International Inc. is proud to provide employment accommodation during the recruitment process. Should you require any accommodations, please notify us if you are contacted for a job interview.

Machine Builder – 3 Openings (2 Integration, 1 Sub‑Assembly)

Location: Clinton Township, MI

Schedule: Full-time, Onsite

Type: Long-Term Contract

Requirements: Must pass drug screen and background check

About the Role

We are seeking skilled Mechanical Machine Builders—2 Integration Builders and 1 Sub‑Assembly Builder—to join our team supporting automotive equipment build and installation projects. This role requires the ability to work independently with minimal supervision while delivering high‑quality workmanship.

Key Responsibilities

• Perform mechanical integration and sub‑assembly work for automotive OEM projects (Chrysler, Ford, GM).
• Work independently on medium-complexity mechanical build projects.
• Follow equipment installation through all phases, from in-house build to customer-site installation.
• Assist the project team in resolving technical issues or build concerns.
• Read and interpret blueprints, mechanical drawings, and BOMs.
• Update and submit weekly E‑BOM summaries to the Mechanical Supervisor.
• Verify all parts and assemblies conform to specifications and engineering documentation.
• Maintain project schedules, track open issues, and meet deadlines.
• Follow all safety, environmental, and quality system procedures.
• Maintain a clean, organized work area.
• Utilize rigging and crane equipment safely and effectively.
• Perform basic welding as required.
• Provide and maintain own tools and PPE.

Qualifications

• Education: One-year certificate from a college or technical school; or
• 5 years of related mechanical assembly experience; or
• Equivalent combination of education and experience.
• Strong understanding of automotive industry build practices.
• Proficient with standard mechanical tools, rigging, and overhead cranes.
• Ability to work with minimal supervision while maintaining high-quality output.
• Reliable, consistent, and punctual attendance is essential.

Additional Details

• This role requires 100% onsite work.
• Long-term contract opportunity with full-time hours.
• Candidates must successfully pass drug screening and background checks.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton, Washington.

As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications.

• Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate.

• Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks.

• Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements.

• Monitor manufacturing processes and document findings as required to ensure compliance with quality standards.

• Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications.

• Screen paperwork for options, substitutions, and effectiveness of parts and materials.

• Identify, investigate, and document discrepancies, reporting them to the shop as necessary.

• Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records.

• Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required.

• Coordinate and complete travelers, investigating and clearing check orders as necessary.

• Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed.

• Ensure that certifications for tools, test equipment, and personnel are current and compliant.

• Assist other employees by providing information and answering questions regarding functions, methods, and procedures.

• Perform first article inspections and FAA conformities, coordinating results as required.

• Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES).

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards.

• Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required.

• Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers.

• Refer to rejection tags and trouble reports to identify problems and initiate corrective actions.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 2+ years of experience as a Quality Inspector

• 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators

• 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)

• Experience working with Microsoft Office (Excel, Word, PowerPoint)

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• Electrical experience

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Apr. 24, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.