Jobs in Wolf Trap Virginia Remote
2,983 positions found — Page 143
NEW RECRUITMENT INCENTIVES!
U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an
exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie,
pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the
Department of Homeland Security workforce, protecting American interests and securing our nation.
If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to
make your move.
DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
As a Customs and Border Protection Officer (CBPO), you will be part of our 60,000+ workforce that
strives to protect the American people by safeguarding our borders, deterring illicit activity, and
enhancing the nation’s economic prosperity. Being a CBPO makes you a valuable member of the Federal
Law Enforcement Officer (LEO) profession.
Typical assignments include:
- Enforcing customs, immigration, and agriculture laws and regulations.
- Facilitating the flow of legitimate trade and travel.
- Conducting inspections of individuals and conveyances.
- Determining the admissibility of individuals for entry into the United States.
- Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband.
Duty Locations – Incentives available for some locations
You will be asked to provide your preference for one of the following mission-critical locations:
Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San
Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando, FL; Honolulu, HI; Chicago, IL; Calais,
Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and
Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and
Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout
River, and Buffalo, NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo,
Presidio, Progreso, and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT;
Blaine, Oroville, and Sumas, WA.
The preference locations listed above are expected to have vacancies available in the future, however, if
the duty locations do not have vacancies at the time of your final offer, you may be offered a duty
location in another geographic location within the United States. Locations offered are based on
operational and mission requirements and critical agency hiring needs for entry-level CBPOs as
determined by the CBP Office of Field Operations (OFO).
Salary – and Duty Location Recruitment Incentives – and Benefits
**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in
5 CFR 575.102
) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the
following locations:
Arizona: Douglas, Lukeville, Nogales, San Luis
California: Calexico
Hawaii: Honolulu
Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro
Michigan: Detroit, Port Huron, Sault Sainte Marie
Minnesota: Grand Portage, International Falls
Montana: Raymond, Sweetgrass
New York: Alexandria Bay, Champlain, Massena, Trout River
North Dakota: Dunseith, Portal
Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford
Washington: Blaine, Oroville
**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in
5 CFR 575.102
will be offered up to a $15,000 incentive per year, for a four-year service contract, in the
following locations:
California: Otay Mesa, San Francisco, San Ysidro, Tecate
Florida: Key West
North Dakota: Pembina
Annual Base Salary for newly appointed CBPOs varies as follows:
- GS-5 and GS-7 $40,332 - $109,952 per year
Locality pay varies by duty location.
Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary.
Grade level eligibility and salaries vary depending upon background, including experience and
education, and duty location of the opportunity. This is a career ladder position with a grade level
progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher
grade level (without re-applying) once you successfully complete 52 weeks in each grade level.
Promotions are at the discretion of the agency.
Officers are eligible to select from an array of federal employment benefits that include health, dental
and other insurance plans, a generous annual and sick leave program, and participation in the Thrift
Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Qualifications:
You qualify for the GS-5 grade level if you possess one of the following:
Experience:A minimum of three (3) years full-time general work experience that demonstrates the
ability to meet and deal with people and the ability to learn and be able to apply a body of facts; OR
Education Substitution:A bachelor's degree or successful completion of a full four (4)-year course of
study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education:A combination of successfully completed college
education AND general work experience. This will be calculated using your resume and official or
unofficial college transcripts submitted with your application.
You qualify for the GS-7 grade level if you possess one of the following:
Experience: A minimum of one (1) year of specialized full-time work experience equivalent to at least
the next lower grade level that includes:
- Performing physical inspections of people, documents or goods for criminal activity, fraud,
and/or illegal operations.
- Utilizing observational techniques, evaluating facts, and reviewing documentation while
applying Federal, State, or local laws and regulations.
- Making determinations in compliance with laws and regulations that may lead to arrests, seizure
of property, fines, and/or penalties based on findings.
OR for the GS-7 grade level:
Education Substitution:A bachelor's degree with Superior Academic Achievement based on (1) class
standing, (2) grade-point average (3.0 or higher), or (3) honor society membership; OR one (1) full year
of graduate-level education. This education must demonstrate the knowledge, skills, and abilities
necessary to do the work: OR
Combination of Experience and Education:A combination of specialized work experience equivalent to
the next lower grade level AND graduate level education from an accredited college or university. This
will be calculated using your resume and official or unofficial transcripts submitted with your
application.
If you have previous or current law enforcement or military law enforcement experience, you may
qualify at the GS-9 grade level. See the GS-9 Job Opportunity Announcement (JOAs) at USAJOBS, the
federal government’s official employment site to determine if you qualify.
Other Requirements:
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under
international law) for at least three (3) of the last five (5) years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement
retirement provisions. Candidates must be referred for selection to the Customs and Border Protection
Officer position before reaching their 40th birthday in accordance with Department of Homeland
Security Directive 251-03. The age restriction may not apply if you are currently serving or have
previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C. 8412(d).
Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment
Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training:You will be required to complete a paid pre-academy orientation for approximately
two (2) weeks at your home port. You will then attend a 101-day training program – CBP Field
Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in
Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training,
examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern
border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program,
which will be completed at their home port. Successful completion of the Academy is required for this
position.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position of
Interest, select Customs and Border Protection Officer.
You’ll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain to
review ALL details of the job opportunity announcement and follow all instructions in the application
process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your
resume, supporting documents, and the CBPO Entrance Exam.
As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about
webinars, career expos, and future opportunities with OFO and CBP.
NEW RECRUITMENT INCENTIVES!
U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an
exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie,
pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the
Department of Homeland Security workforce, protecting American interests and securing our nation.
If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to
make your move.
DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
As a Customs and Border Protection Officer (CBPO), you will be part of our 60,000+ workforce that
strives to protect the American people by safeguarding our borders, deterring illicit activity, and
enhancing the nation’s economic prosperity. Being a CBPO makes you a valuable member of the Federal
Law Enforcement Officer (LEO) profession.
Typical assignments include:
- Enforcing customs, immigration, and agriculture laws and regulations.
- Facilitating the flow of legitimate trade and travel.
- Conducting inspections of individuals and conveyances.
- Determining the admissibility of individuals for entry into the United States.
- Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband.
Duty Locations – Incentives available for some locations
You will be asked to provide your preference for one of the following mission-critical locations:
Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San
Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando, FL; Honolulu, HI; Chicago, IL; Calais,
Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and
Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and
Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout
River, and Buffalo, NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo,
Presidio, Progreso, and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT;
Blaine, Oroville, and Sumas, WA.
The preference locations listed above are expected to have vacancies available in the future, however, if
the duty locations do not have vacancies at the time of your final offer, you may be offered a duty
location in another geographic location within the United States. Locations offered are based on
operational and mission requirements and critical agency hiring needs for entry-level CBPOs as
determined by the CBP Office of Field Operations (OFO).
Salary – and Duty Location Recruitment Incentives – and Benefits
**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in
5 CFR 575.102
) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the
following locations:
Arizona: Douglas, Lukeville, Nogales, San Luis
California: Calexico
Hawaii: Honolulu
Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro
Michigan: Detroit, Port Huron, Sault Sainte Marie
Minnesota: Grand Portage, International Falls
Montana: Raymond, Sweetgrass
New York: Alexandria Bay, Champlain, Massena, Trout River
North Dakota: Dunseith, Portal
Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford
Washington: Blaine, Oroville
**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in
5 CFR 575.102
will be offered up to a $15,000 incentive per year, for a four-year service contract, in the
following locations:
California: Otay Mesa, San Francisco, San Ysidro, Tecate
Florida: Key West
North Dakota: Pembina
Annual Base Salary for newly appointed CBPOs varies as follows:
- GS-5 and GS-7 $40,332 - $109,952 per year
Locality pay varies by duty location.
Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary.
Grade level eligibility and salaries vary depending upon background, including experience and
education, and duty location of the opportunity. This is a career ladder position with a grade level
progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher
grade level (without re-applying) once you successfully complete 52 weeks in each grade level.
Promotions are at the discretion of the agency.
Officers are eligible to select from an array of federal employment benefits that include health, dental
and other insurance plans, a generous annual and sick leave program, and participation in the Thrift
Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Qualifications:
You qualify for the GS-5 grade level if you possess one of the following:
Experience:A minimum of three (3) years full-time general work experience that demonstrates the
ability to meet and deal with people and the ability to learn and be able to apply a body of facts; OR
Education Substitution:A bachelor's degree or successful completion of a full four (4)-year course of
study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education:A combination of successfully completed college
education AND general work experience. This will be calculated using your resume and official or
unofficial college transcripts submitted with your application.
You qualify for the GS-7 grade level if you possess one of the following:
Experience: A minimum of one (1) year of specialized full-time work experience equivalent to at least
the next lower grade level that includes:
- Performing physical inspections of people, documents or goods for criminal activity, fraud,
and/or illegal operations.
- Utilizing observational techniques, evaluating facts, and reviewing documentation while
applying Federal, State, or local laws and regulations.
- Making determinations in compliance with laws and regulations that may lead to arrests, seizure
of property, fines, and/or penalties based on findings.
OR for the GS-7 grade level:
Education Substitution:A bachelor's degree with Superior Academic Achievement based on (1) class
standing, (2) grade-point average (3.0 or higher), or (3) honor society membership; OR one (1) full year
of graduate-level education. This education must demonstrate the knowledge, skills, and abilities
necessary to do the work: OR
Combination of Experience and Education:A combination of specialized work experience equivalent to
the next lower grade level AND graduate level education from an accredited college or university. This
will be calculated using your resume and official or unofficial transcripts submitted with your
application.
If you have previous or current law enforcement or military law enforcement experience, you may
qualify at the GS-9 grade level. See the GS-9 Job Opportunity Announcement (JOAs) at USAJOBS, the
federal government’s official employment site to determine if you qualify.
Other Requirements:
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under
international law) for at least three (3) of the last five (5) years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement
retirement provisions. Candidates must be referred for selection to the Customs and Border Protection
Officer position before reaching their 40th birthday in accordance with Department of Homeland
Security Directive 251-03. The age restriction may not apply if you are currently serving or have
previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C. 8412(d).
Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment
Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training:You will be required to complete a paid pre-academy orientation for approximately
two (2) weeks at your home port. You will then attend a 101-day training program – CBP Field
Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in
Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training,
examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern
border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program,
which will be completed at their home port. Successful completion of the Academy is required for this
position.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position of
Interest, select Customs and Border Protection Officer.
You’ll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain to
review ALL details of the job opportunity announcement and follow all instructions in the application
process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your
resume, supporting documents, and the CBPO Entrance Exam.
As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about
webinars, career expos, and future opportunities with OFO and CBP.
NEW RECRUITMENT INCENTIVES!
U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an
exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie,
pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the
Department of Homeland Security workforce, protecting American interests and securing our nation.
If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to
make your move.
DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
As a Customs and Border Protection Officer (CBPO), you will be part of our 60,000+ workforce that
strives to protect the American people by safeguarding our borders, deterring illicit activity, and
enhancing the nation’s economic prosperity. Being a CBPO makes you a valuable member of the Federal
Law Enforcement Officer (LEO) profession.
Typical assignments include:
- Enforcing customs, immigration, and agriculture laws and regulations.
- Facilitating the flow of legitimate trade and travel.
- Conducting inspections of individuals and conveyances.
- Determining the admissibility of individuals for entry into the United States.
- Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband.
Duty Locations – Incentives available for some locations
You will be asked to provide your preference for one of the following mission-critical locations:
Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San
Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando, FL; Honolulu, HI; Chicago, IL; Calais,
Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and
Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and
Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout
River, and Buffalo, NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo,
Presidio, Progreso, and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT;
Blaine, Oroville, and Sumas, WA.
The preference locations listed above are expected to have vacancies available in the future, however, if
the duty locations do not have vacancies at the time of your final offer, you may be offered a duty
location in another geographic location within the United States. Locations offered are based on
operational and mission requirements and critical agency hiring needs for entry-level CBPOs as
determined by the CBP Office of Field Operations (OFO).
Salary – and Duty Location Recruitment Incentives – and Benefits
**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in
5 CFR 575.102
) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the
following locations:
Arizona: Douglas, Lukeville, Nogales, San Luis
California: Calexico
Hawaii: Honolulu
Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro
Michigan: Detroit, Port Huron, Sault Sainte Marie
Minnesota: Grand Portage, International Falls
Montana: Raymond, Sweetgrass
New York: Alexandria Bay, Champlain, Massena, Trout River
North Dakota: Dunseith, Portal
Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford
Washington: Blaine, Oroville
**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in
5 CFR 575.102
will be offered up to a $15,000 incentive per year, for a four-year service contract, in the
following locations:
California: Otay Mesa, San Francisco, San Ysidro, Tecate
Florida: Key West
North Dakota: Pembina
Annual Base Salary for newly appointed CBPOs varies as follows:
- GS-5 and GS-7 $40,332 - $109,952 per year
Locality pay varies by duty location.
Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary.
Grade level eligibility and salaries vary depending upon background, including experience and
education, and duty location of the opportunity. This is a career ladder position with a grade level
progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher
grade level (without re-applying) once you successfully complete 52 weeks in each grade level.
Promotions are at the discretion of the agency.
Officers are eligible to select from an array of federal employment benefits that include health, dental
and other insurance plans, a generous annual and sick leave program, and participation in the Thrift
Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Qualifications:
You qualify for the GS-5 grade level if you possess one of the following:
Experience:A minimum of three (3) years full-time general work experience that demonstrates the
ability to meet and deal with people and the ability to learn and be able to apply a body of facts; OR
Education Substitution:A bachelor's degree or successful completion of a full four (4)-year course of
study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education:A combination of successfully completed college
education AND general work experience. This will be calculated using your resume and official or
unofficial college transcripts submitted with your application.
You qualify for the GS-7 grade level if you possess one of the following:
Experience: A minimum of one (1) year of specialized full-time work experience equivalent to at least
the next lower grade level that includes:
- Performing physical inspections of people, documents or goods for criminal activity, fraud,
and/or illegal operations.
- Utilizing observational techniques, evaluating facts, and reviewing documentation while
applying Federal, State, or local laws and regulations.
- Making determinations in compliance with laws and regulations that may lead to arrests, seizure
of property, fines, and/or penalties based on findings.
OR for the GS-7 grade level:
Education Substitution:A bachelor's degree with Superior Academic Achievement based on (1) class
standing, (2) grade-point average (3.0 or higher), or (3) honor society membership; OR one (1) full year
of graduate-level education. This education must demonstrate the knowledge, skills, and abilities
necessary to do the work: OR
Combination of Experience and Education:A combination of specialized work experience equivalent to
the next lower grade level AND graduate level education from an accredited college or university. This
will be calculated using your resume and official or unofficial transcripts submitted with your
application.
If you have previous or current law enforcement or military law enforcement experience, you may
qualify at the GS-9 grade level. See the GS-9 Job Opportunity Announcement (JOAs) at USAJOBS, the
federal government’s official employment site to determine if you qualify.
Other Requirements:
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under
international law) for at least three (3) of the last five (5) years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement
retirement provisions. Candidates must be referred for selection to the Customs and Border Protection
Officer position before reaching their 40th birthday in accordance with Department of Homeland
Security Directive 251-03. The age restriction may not apply if you are currently serving or have
previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C. 8412(d).
Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment
Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training:You will be required to complete a paid pre-academy orientation for approximately
two (2) weeks at your home port. You will then attend a 101-day training program – CBP Field
Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in
Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training,
examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern
border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program,
which will be completed at their home port. Successful completion of the Academy is required for this
position.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position of
Interest, select Customs and Border Protection Officer.
You’ll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain to
review ALL details of the job opportunity announcement and follow all instructions in the application
process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your
resume, supporting documents, and the CBPO Entrance Exam.
As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about
webinars, career expos, and future opportunities with OFO and CBP.
NEW RECRUITMENT INCENTIVES!
U.S. Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America. You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation.
If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move.
DON’T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW
As a Customs and Border Protection Officer (CBPO), you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include:
- Enforcing customs, immigration, and agriculture laws and regulations.
- Facilitating the flow of legitimate trade and travel.
- Conducting inspections of individuals and conveyances.
- Determining the admissibility of individuals for entry into the United States; and
- Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband.
Duty Locations – Incentives available for some locations
You will be asked to provide your preference for one of the following mission-critical locations:
Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San
Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando, FL; Honolulu, HI; Chicago, IL; Calais,
Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and
Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and
Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout
River, and Buffalo, NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo,
Presidio, Progreso, and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT;
Blaine, Oroville, and Sumas, WA.
The preference locations listed above are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States. Locations offered are based on operational and mission requirements and critical agency hiring needs for entry-level CBPOs as determined by the CBP Office of Field Operations (OFO).
Salary – and Duty Location Recruitment Incentives – and Benefits
**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the following locations:
Arizona: Douglas, Lukeville, Nogales, San Luis
California: Calexico
Hawaii: Honolulu
Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro
Michigan: Detroit, Port Huron, Sault Sainte Marie
Minnesota: Grand Portage, International Falls
Montana: Raymond, Sweetgrass
New York: Alexandria Bay, Champlain, Massena, Trout River
North Dakota: Dunseith, Portal
Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford
Washington: Blaine, Oroville
**Recruitment Incentive** Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102) will be offered up to a $15,000 incentive per year, for a four-year service contract, in the following locations:
California: Otay Mesa, San Francisco, San Ysidro, Tecate
Florida: Key West
North Dakota: Pembina
Annual Base Salary for newly appointed CBPOs varies as follows:
Locality pay varies by duty location.
Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary.
Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity. This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level. Promotions are at the discretion of the agency.
Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Qualifications:
You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both.
Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes:
- Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods.
- Enforcing the laws and regulations relating to importing, exporting, and/or international shipping to and from the United States.
- Utilizing intelligence techniques and behavior analysis to identify potential threats and perform risk assessments for violations of laws and threats to national security.
- Conducting interviews in a law enforcement capacity for the purposes of gaining information from suspected violators of laws to determine the appropriate course of action.
The above experience will be applied in connection with the following: Ability to make rapid, accurate judgments and decisions with respect to the application of the regulations, instructions, and procedures for importing and exporting merchandise to and from the United States; or enforcement and administration of laws relating to the right of persons to enter, reside in or depart from the United States, Guam, Puerto Rico, and the U.S. Virgin Islands.
Education Substitution: A master's (or higher) degree, or two or more years of progressively higher-level graduate education leading to such a degree, or an LL.B. or J.D. from an accredited college or university; OR
Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Other Requirements:
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training: You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port. You will then attend a 101-day training program – CBP Field Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA. This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc. Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port. Successful completion of the Academy is required for this position.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network page. For Position of Interest, select Customs and Border Protection Officer.
You’ll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the CBPO Entrance Exam.
As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with OFO and CBP.
Last year our HCA Healthcare colleagues invested over 156,000 hours volunteering in our communities. As a(an) CT Technologist with Chippenham Hospital you can be a part of an organization that is devoted to giving back!
BenefitsChippenham Hospital offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include:
- Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation.
- Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more.
- Free counseling services and resources for emotional, physical and financial wellbeing
- 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service)
- Employee Stock Purchase Plan with 10% off HCA Healthcare stock
- Family support through fertility and family building benefits with Progyny and adoption assistance.
- Referral services for child, elder and pet care, home and auto repair, event planning and more
- Consumer discounts through Abenity and Consumer Discounts
- Retirement readiness, rollover assistance services and preferred banking partnerships
- Education assistance (tuition, student loan, certification support, dependent scholarships)
- Colleague recognition program
- Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence)
- Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income.
Learn more about Employee Benefits
Note: Eligibility for benefits may vary by location.
Would you like to unlock your potential with a leading healthcare provider dedicated to the growth and development of our colleagues? Join the Chippenham Hospital family! We will give you the tools and resources you need to succeed in our organization. We are looking for an enthusiastic CT Technologist to help us reach our goals. Unlock your potential!
Currently offering a sign-on bonus up to $15KJob Summary and Qualifications- Demonstrates ability to obtain quality CT images of patients. Demonstrates competence in following established scanning protocols and exercises ability to adjust protocols as required.
- Complies with radiation safety guidelines for patient and self. Appropriately utilizes Personal Protective Equipment. Always operates CT scanner safely and competently.
- Demonstrates the ability to perform all necessary computer operations. (i.e. Meditech) Ensure proper charges are entered and referring physicians orders are verified.
- Renders patient care in a professional and courteous manner.
- Prepares examination rooms for CT scan and/or invasive procedures. Monitors inventory of supplies during room rotation and maintain room cleanliness and neat appearance.
- Assist the radiologist in administering medication, contrast agents, performing biopsies and all types of care to patients.
- Reviews each exam for technical accuracy (i.e. technical quality, anatomical positioning, annotation, etc.) and completes verification process in PACS.
- Assists Facility System Administrator and CT Supervisor with PACS clean up. (i.e.: unarchived images, verifications and reporting unspecified images).
- Maintains strict confidentiality regarding employees and patients according to HIPAA Policy and Procedure.
- Completes and maintains personal educational requirements
EDUCATION
- Graduate of AMA approved School of Radiologic Technology. Responsible for continuing education credits as mandated by the ARRT for licensure - Required
LICENSURE/CERTIFICATION
- American Registry of Radiologic Technology
- ARRT - CT Technology Certification (required within 6 months of hire)
- American Heart Association Basic Life Support (BLS) Health Care Provider
EXPERIENCE
- One-year as a CT technologist - Preferred
Chippenham Hospital has provided quality healthcare services since 1972, giving patient's access to highly-trained physicians and advanced technology. With more than 50 years of pioneering healthcare, our 460+ bed hospital is one of the region's leading acute care facilities located on the Southside of Richmond. We are the region's first choice for orthopedics, joint care, behavioral health and cardiovascular care. The Joint Commission awarded Chippenham Hospital the Gold Seal of Approval and named us a Top Performer on Key Quality Measures for advanced primary stroke, heart attack, heart failure, pneumonia, perinatal care, hip and knee replacement and surgical care. We are also a Level I Burn Center and Level I Trauma Center.
HCA Healthcare Co-Founder
Be a part of an organization that invests in you! We are reviewing applications for our CT Technologist opening. Qualified candidates will be contacted for interviews. Submit your application and help us raise the bar in patient care!
We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
The Registered Nurse – Home Health is responsible for providing and documenting skilled nursing care in accordance with the developed care plan and physicians’ orders for each individual patient while adhering to confidentiality standards and professional boundaries at all times.
Full Time hours needed with on-call rotation in Mobile and Washington Areas
Essential Job Functions:
- Develop a plan of care through physician orders, client input, and nursing assessment to include medical interventions and measurable goals and outcomes.
- Educate clients and their family members based on client’s specific needs.
- Properly orient and train primary caregivers to ensure the most optimal functioning level for each client.
- Coordinate the continuum of hands on client care through documentation and timely communication with the client's physician and other caregivers.
- Provide care in patients home using a variety of skills such as phone triage, patient education, observation/assessment, wound care, infusions, catheter care, PICC line dressing changes etc.
Why Join Our Team?
- Our clinical team is a family of clinicians who work together to meet the needs of each patient
- Nationwide career opportunities where our leaders encourage advancements
- Our clinicians enjoy the flexibility of getting to build rapport with patients to produce the best clinical outcomes
- We know that our clinicians make or break the organization’s success
Aveanna Healthcare Offers:
- 401(k) with match
- Health, Dental and Vision Benefits for employees at 30+ hours
- Tuition Discounts and Reimbursement
- PTO, Sick Time, and Paid Holidays
Requirements:
- An active RN License in the state of application
- Valid CPR
Preferred:
- Medicare Skilled Nursing experience
- Basic understanding of Oasis
- 1-year RN experience in a health care setting
HHH
As an employer accepting Medicare and Medicaid funds, employees must comply with all health-related requirements in all relevant jurisdictions, including required vaccinations and testing, subject to exemptions for medical or religious reasons as appropriate.
Notice for Job Applicants Residing in California
Notice for Job Applicants Residing in Florida
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Roanoke, VA (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PI9f9d0dc2832d-38
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Tyler, TX (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PI26aca347aca
Remote working/work at home options are available for this role.
