Jobs in Tustin Remote
3,105 positions found — Page 143
C
Border Patrol Agent - Entry Level
Salary not disclosed
Job Description
Border Patrol Agent (BPA) GL-5/7 grade levels
NEW RECRUITMENT AND RETENTION INCENTIVES!
IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.
DON'T FORGET TO CHECK OUT THE INCENTIVES - SEE SALARY SECTION BELOW
The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.
If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level , career Law Enforcement Officer (LEO) opportunities.
Salary and Benefits
Annual Base Salary for newly appointed BPAs varies per grade, as follows:
* GL-5/GL-7 $49,739 - $89,518 per year
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.
*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duties and Responsibilities
As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include:
* Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
* Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
* Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
* Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
* Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications
You qualify for the GL-5 grade level if you possess one of the following:
Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR
Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You qualify for the GL-7 grade level if you possess one of the following:
Experience: One year of specialized work experience that shows you have the skills necessary to:
* Make sound judgments and decisions in the use of firearms.
* Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
* Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR
A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.
Other Requirements
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest , select Border Patrol Agent, then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Border Patrol Agent (BPA) GL-5/7 grade levels
NEW RECRUITMENT AND RETENTION INCENTIVES!
IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.
DON'T FORGET TO CHECK OUT THE INCENTIVES - SEE SALARY SECTION BELOW
The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.
If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level , career Law Enforcement Officer (LEO) opportunities.
Salary and Benefits
Annual Base Salary for newly appointed BPAs varies per grade, as follows:
* GL-5/GL-7 $49,739 - $89,518 per year
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.
*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duties and Responsibilities
As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include:
* Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
* Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
* Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
* Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
* Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications
You qualify for the GL-5 grade level if you possess one of the following:
Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR
Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You qualify for the GL-7 grade level if you possess one of the following:
Experience: One year of specialized work experience that shows you have the skills necessary to:
* Make sound judgments and decisions in the use of firearms.
* Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
* Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR
A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.
Other Requirements
Citizenship: You must be a U.S. Citizen to apply for this position.
Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
How to Apply:
Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest , select Border Patrol Agent, then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
Not Specified
H
Physician / Radiology - Diagnostic / California / Locum Tenens / Locums Radiology Job in California
Salary not disclosed
Locums Radiology Job in CaliforniaUrgently seeking Radiologist for locums coverage near Anaheim, CA.
Job Details: Practice Setting: Inpatient, Outpatient Coverage Type: No Call Coverage Date: 2/7/2022
- Ongoing Shift: 1-2 weeks a month
- 8a-5p Procedures: Stereo Tactic biopsies, 3D mammo at one site, Thoras, Paras and LP's EMR System: Powerscribe Other detail: Radiology-Diagnostic/Mammography needed.
If you are interested in hearing more about this opportunity, please call or text MD Staff at (4
You can also reach us through email at .
Please reference Job ID #j-52571.
Not Specified
H
Physician / Family Practice / California / Locum Tenens / Locums Physician - Primary Care Job in California
🏢 Hayman Daugherty Associates
Salary not disclosed
Locum Tenens Opportunity: Physician
- Primary Care Near Irvine, CA (Job ID: j-244238) A fantastic locum tenens opportunity is available for a Primary Care Physician near Irvine, CA.
This position is ideal for a dedicated physician who is passionate about providing high-quality care to patients of all ages in an outpatient primary care setting.
The role requires a physician who is board-certified or board-eligible in Family Medicine, with a strong preference for candidates who are already licensed in California.
Position Details: Position: Primary Care Physician (Family Medicine) Location: Near Irvine, CA Schedule: ASAP
- Ongoing Shift: 5 days a week, 8-hour shifts (8:00 AM
- 5:00 PM) Block Schedules: No block schedules Patient Load: 18-20 patients per day Practice Setting: Primary Care Clinic Job Responsibilities: Patient Age Group: Care for all age groups, from children to geriatrics Procedures: Perform minor in-office procedures such as cyst removal, laceration repair, and skin biopsies EMR: Proficiency in Epic is highly preferred Daily Schedule: 7 hours of patient-facing time with 1 hour dedicated to administrative tasks Requirements: Board Certification: Board Certified or Board Eligible in Family Medicine (Preferred but not required) State License: Must hold a current and unrestricted California medical license Certifications: Basic Life Support (BLS) (Required) Advanced Cardiovascular Life Support (ACLS) (Preferred) DEA: Must have an active DEA certificate Experience: Minimum of 6 months of recent outpatient Family Medicine primary care experience Charting Experience: Experience with Epic EMR is highly preferred Work Experience: Must have 2+ years of experience in outpatient primary care Additional Job Details: Support Staff: Full support staff available, including practice manager, front office supervisor, medical assistants, and patient care associates Credentialing: The credentialing process is expected to take 4-6 weeks Contract Length: 3+ months, with potential for extension Vaccination Requirements: Vaccinations are optional, not mandatory Practice Environment: This position does not require any call duties, allowing you to focus on patient care during clinic hours This is an excellent opportunity for a physician seeking a stable, long-term locum tenens position in a well-supported primary care setting near Irvine, CA.
The clinic environment offers a collaborative team atmosphere where you can deliver comprehensive care to a diverse patient population.
If you are a Primary Care Physician with a passion for patient care and meet the qualifications, consider applying for this rewarding locum tenens position.
Job ID: j-244238
Not Specified
H
Physician / ObGyn / California / Locum Tenens / Locum Tenens OBGYN (Outpatient) ??? within Orange County CA
🏢 Hayman Daugherty Associates
Salary not disclosed
We are seeking a Board-Certified/Board-Eligible OBGYN for a locum tenens outpatient opportunity within Orange County CA.
This role is to cover Mid-March to Mid-June, with the possibility of extension.
Position Details: ??? Schedule: 1???4 days per week (Monday???Thursday, 8 AM ??? 5 PM)??? Setting: Outpatient Clinic (No deliveries, No hospital privileges required)??? Coverage Period: Mid-March to Mid-June (with potential extension) Procedures & Cases: Confirmation of pregnancy (>7 weeks) with bedside ultrasound Initial OB visits, routine OB care, postpartum & incision checks Well-Woman Exams (WWE) for all ages Procedures: IUD/Nexplanon insertion & removal, LEEP, colposcopy, EMB, cryotherapy, cervical polyp removal Problem visits: UTI, STI, menopause, HRT, breast pain Incision & Drainage for cysts ??? Interested? Apply today!
Not Specified
Physician Assistant / Geriatrics / New Jersey / Locum Tenens / Nurse Practitioner or Physician Assistant-(Essex County, NJ)
Salary not disclosed
About UsEnnoble Care is a mobile primary care, palliative care, and hospice service provider with patients in New York, New Jersey, Maryland, DC, Virginia, Oklahoma, Kansas, Pennsylvania, and Georgia. Ennoble Care's clinicians go to the home of the patient, providing continuum of care for those with chronic conditions and limited mobility. Ennoble Care offers a variety of programs including, remote patient monitoring, behavioral health management, and chronic care management, to ensure that our patients receive the highest quality of care by a team they know and trust. We seek individuals who are driven to make a difference and embody our motto, "To Care is an Honor." Join Ennoble Care today!Purpose: We are looking for an experienced Nurse Practitioner to provide primary care to homebound and palliative care patients in the Essex County, NJregion. You will apply medical techniques and principles under the supervision of a physician and you will care for a diverse set of patients with chronic diseases. What You'll Do:
- Provide high quality care to primary and palliative patients in and around (Essex County, NJ)
- Assess patient's health by performing physical examinations; obtaining, updating, and studying medical histories and creating the best plan for care.
- Effectively communicate with office staff and clinical operations across various internal platforms
- Provide high quality, patient centered care to a panel of patients
- Attend quarterly medical staff meetings
- Develop impressions, diagnosis, and treatment plans
- Foster trust and consult with patients, families, and caregivers during visits
- Order diagnostic testing as medically necessary
- Prescribe medications supplies and appropriate medically necessary interventions
What You'll Need:
- Board Certified, with a valid NP or PA certification in the state of New Jersey
- Strong clinical skills with the ability to accurately and confidently treat, assess, and diagnose
- Positive demeanor and strong people skills
- Ability to confidently problem solve and operate independently
- 1-2 years of primary care experience with geriatric patients (hospice experience highly preferred but not required)
What you'll get:
- A flexible schedule - so you can see your patients during a schedule that works for you
- Autonomy - so you can feel trusted to provide the best care possible.
- Support - from our in-house clinical team with any requests or orders.
- Growth - the opportunity to join our growing leadership team
Salary Range:
- $$+ (depending on experience and other incentives)
#PinkFull-time employees qualify for the following benefits:
- Medical, Dental, Vision and supplementary benefits such as Life Insurance, Short Term and Long Term Disability, Flexible Spending Accounts for Medical and Dependent Care, Accident, Critical Illness, and Hospital Indemnity.
- Paid Time Off
- Paid Office Holidays
All employees qualify for these benefits:
- Paid Sick Time
- 401(k) with up to 3% company match
- Referral Program
- Payactiv: pay-on-demand. Cash out earned money when and where you need it!
Ennoble Care is an Equal Opportunity Employer, committed to hiring the best team possible, and does not discriminate against protected characteristics including but not limited to - race, age, sexual orientation, gender identity and expression, national origin, religion, disability, and veteran status.
Not Specified
Power Distribution and Make Ready Designer (Remote) (Roanoke)
✦ New
Salary not disclosed
Description:
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Roanoke, VA (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PI9f9d0dc2832d-38
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Roanoke, VA (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PI9f9d0dc2832d-38
Remote working/work at home options are available for this role.
temporary
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
✦ New
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
Power Distribution and Make Ready Designer (Remote) (Tyler)
✦ New 🏢 Sigma Technologies, Ltd.
Salary not disclosed
Description:
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Tyler, TX (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PI26aca347aca
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Tyler, TX (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PI26aca347aca
Remote working/work at home options are available for this role.
temporary
Home Health Registered Nurse Full Time - Flexible Scheduling for Work-Life Balance (Hiring Immediately)
✦ New
Salary not disclosed
Make a Real Difference—One Patient at a Time
Now Hiring Full-Time: Registered Nurse (RN), Home Health
Join Aveanna’s Home Health team and deliver personalized care that empowers patients and supports their independence. We serve a diverse population with a wide range of skilled nursing needs with a focus on dignity, outcomes, and continuity.
Schedule: Monday - Friday with 7 Day on call rotation (30 hr work week)
Territory: Lodi, Poynette, Merrimac, Sauk, Arlington, Portage (overlap)
Why Join Us?
- Organization focused on creating great clinical outcomes for our patients
- Most of our home health locations are rated as 4+ stars for quality and satisfaction
- Directly impact the lives of patients in your local community
- Flexible scheduling that gives you the opportunity for better work-life balance
What You’ll Do:
- Provide and document skilled nursing care based on individualized care plans and physician orders
- Perform patient assessments and create personalized care strategies that support recovery and independence
- Educate patients and families on specific medications, symptom management and lifestyle changes to promote better patient outcomes and independence in the home
- Train and support caregivers to ensure safe and effective care at home
- Deliver a broad range of hands-on care, including wound care, infusions, catheter care, pain management, medication management, vital signs, post-operative care, etc.
- Collaborate closely with physicians and care teams to ensure coordinated, high-quality outcomes
Benefits Offerings:
- 401(k) with company match
- Health, dental, vision, life, and pet insurance
- Mileage reimbursement and cell phone allowance
- Generous PTO, sick time, and paid holidays
- Inclusion Day to celebrate what matters to you
- Float Day for extra flexibility and balance
- Up to 8 Hours of Paid Volunteer time yearly
- No-Cost Employee Assistance Program (EAP) - unlimited mental health telephonic counseling sessions, support with identity left, Will preparation and travel assistance
- Robust DEI company program because Inclusion is an Aveanna Core Value
- Tuition discounts and reimbursement
What You Need:
- Active RN license in state of residence
- Current CPR certification
- Valid driver’s license, current car insurance and reliable transportation
Preferred Qualifications:
- At least 1 year of nursing experience in home health (OASIS), med surge, ER or hospice
HHH
As an employer accepting Medicare and Medicaid funds, employees must comply with all health-related requirements in all relevant jurisdictions, including required vaccinations and testing, subject to exemptions for medical or religious reasons as appropriate.
Notice for Job Applicants Residing in California
Notice for Job Applicants Residing in Florida
Remote working/work at home options are available for this role.
Now Hiring Full-Time: Registered Nurse (RN), Home Health
Join Aveanna’s Home Health team and deliver personalized care that empowers patients and supports their independence. We serve a diverse population with a wide range of skilled nursing needs with a focus on dignity, outcomes, and continuity.
Schedule: Monday - Friday with 7 Day on call rotation (30 hr work week)
Territory: Lodi, Poynette, Merrimac, Sauk, Arlington, Portage (overlap)
Why Join Us?
- Organization focused on creating great clinical outcomes for our patients
- Most of our home health locations are rated as 4+ stars for quality and satisfaction
- Directly impact the lives of patients in your local community
- Flexible scheduling that gives you the opportunity for better work-life balance
What You’ll Do:
- Provide and document skilled nursing care based on individualized care plans and physician orders
- Perform patient assessments and create personalized care strategies that support recovery and independence
- Educate patients and families on specific medications, symptom management and lifestyle changes to promote better patient outcomes and independence in the home
- Train and support caregivers to ensure safe and effective care at home
- Deliver a broad range of hands-on care, including wound care, infusions, catheter care, pain management, medication management, vital signs, post-operative care, etc.
- Collaborate closely with physicians and care teams to ensure coordinated, high-quality outcomes
Benefits Offerings:
- 401(k) with company match
- Health, dental, vision, life, and pet insurance
- Mileage reimbursement and cell phone allowance
- Generous PTO, sick time, and paid holidays
- Inclusion Day to celebrate what matters to you
- Float Day for extra flexibility and balance
- Up to 8 Hours of Paid Volunteer time yearly
- No-Cost Employee Assistance Program (EAP) - unlimited mental health telephonic counseling sessions, support with identity left, Will preparation and travel assistance
- Robust DEI company program because Inclusion is an Aveanna Core Value
- Tuition discounts and reimbursement
What You Need:
- Active RN license in state of residence
- Current CPR certification
- Valid driver’s license, current car insurance and reliable transportation
Preferred Qualifications:
- At least 1 year of nursing experience in home health (OASIS), med surge, ER or hospice
HHH
As an employer accepting Medicare and Medicaid funds, employees must comply with all health-related requirements in all relevant jurisdictions, including required vaccinations and testing, subject to exemptions for medical or religious reasons as appropriate.
Notice for Job Applicants Residing in California
Notice for Job Applicants Residing in Florida
Remote working/work at home options are available for this role.
permanent
Principal Mechanical Design Engineer - Data Center Infrastructure (REMOTE) (AUSTIN)
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Integration Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
temporary
jobs by
✓ All jobs loaded