Engineering Jobs in Texas Flexible

Job Title: Engineering - Airframe Stress Analysis Engineer

Location: Fort Worth, Texas 76119

Duration: 12 months contract on W2 (possible extension)

1st (07:00 AM - 03:30 PM)

Onsite Opportunity

Position Responsibilities:

∙ Support airframe structural designs based on trade studies, research, and analysis.

∙ Responsible for performing detailed analysis of advanced composite and metallic structure using classical hand calculations and FE tools to develop high performance airframe structures.

∙ Perform static analysis using industry standard calculations methods (i.e. Bruhn, Roark Flabel, and O.E.M. structures manuals).

∙ Coordinate with other engineering, manufacturing, or specialty personnel to resolve problems.

∙ Apply scientific analysis and mathematical models to predict and measure the outcome and consequence of design, in terms of stress, strength, life, stiffness, and weight, providing alternatives as needed.

∙ Oversee and monitor product acceptance procedures and parameters to achieve product reliability and safety standards (e.g. failure analysis).

∙ Contribute to the completion milestones associated with specific projects (e.g. create functional diagrams and system layouts; review detailed drawings and schematics; define data structure, interfaces and analyze material requirements).

∙ Execute Tasks to Cost and Schedule Requirements.

∙ Support supplier / teammate design activity.

∙ Support test activity, including test plan development, execution, and reports.

∙ Create and present design plans and analysis to leadership with supporting recommendation(s).

∙ Excellent writing, presentation, and communication skills.

Education Requirements:

∙ Bachelor's Degree in Engineering required. Major in Aerospace or Mechanical with focus on structural analysis is preferred. Other degrees may be considered.

Position Requirements:

∙ Multiple levels of experience will be considered with at least 5 years experience in structural analysis. Aerospace industry is preferred but other relevant experience may be considered.

∙ Experience in helicopter or tiltrotor structural design is preferred, including composites.

∙ Must have the ability to communicate efficiently and effectively to coordinate design and analysis activities, prioritize tasks, and report status to design leads.

∙ Must be able to build and maintain effective relationships with customers, internal and external suppliers, as well as horizontal integrations across the other teams to complete design tasks.

∙ Proficiency in Microsoft Word, Excel, PowerPoint, and Outlook is required.

∙ Proficiency in Finite Element Analysis using MSC.NASTRAN and Altair Hypermesh

∙ Must have the ability to work effectively within a team.

∙ Must have the ability to prioritize a variety of assignments.

∙ Good interpersonal and organizational skills are required.

Job Overview:

As a Data Engineer, you will assist in building scalable data systems for analytics and reporting.

Responsibilities:

Develop data pipelines

Collaborate with analytics teams

Maintain cloud-based data platforms

Requirements:

Bachelor's degree in technical discipline

Experience with SQL and cloud services

Understanding of big data tools

NR Consulting is currently seeking a highly motivated Manufacturing Engineering Manager for an opportunity in Spring, TX – Onsite!

Position Title: Manufacturing Engineering Manager

Location: Spring, TX – Onsite

Anticipated Start Date: 04/01/2026.

Please note this is the target date and is subject to change. NR consulting will send official notice ahead of a confirmed start date.

Job Type: Fulltime Permanent Role/Direct Hire

Salary Range: $90K - $120K/annum plus benefits

Please note that actual compensation may vary within this range due to factors such as location, experience, and job responsibilities, and does not encompass additional non-standard compensation (e.g., benefits, paid time off, per diem, etc.).

Job Description:

We are partnering with an established industrial manufacturing organization seeking a General Manager – Manufacturing Operations to lead a business unit and oversee plant operations. This leadership role will be responsible for driving operational performance, financial results, safety initiatives, and production efficiency within a specialized fabrication environment.

The ideal candidate will bring a strong mix of business leadership, operational management, and technical manufacturing expertise while fostering a culture of safety, quality, and continuous improvement.

Key Responsibilities:

• Operational Leadership: Oversee day-to-day plant operations including production planning, scheduling, and shop floor activities.
• Financial Accountability: Manage business unit performance including budgeting, cost control, and revenue growth initiatives.
• Quality & Compliance: Ensure manufacturing activities align with industry codes, internal quality standards, and regulatory requirements.
• Safety Management: Promote and maintain a strong safety culture in compliance with workplace safety regulations and internal policies.
• Cross-Functional Leadership: Collaborate with engineering, supply chain, and commercial teams to meet project timelines and customer expectations.
• Process Improvement: Implement continuous improvement initiatives such as Lean or similar methodologies to enhance operational efficiency.
• Team Development: Recruit, mentor, and develop technical and production teams while building a high-performance work environment.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Industrial Engineering, or a related field preferred.
• Experience: 10+ years of progressive leadership experience within heavy manufacturing, fabrication, or engineered equipment environments.

Technical Background:

• Experience working within code-driven manufacturing environments involving complex fabricated equipment.
• Familiarity with industry engineering and design standards used in industrial equipment manufacturing.
• Exposure to fabrication, welding processes, and inspection/quality practices common in heavy manufacturing.
• Strong financial, operational, and leadership capabilities with excellent communication and problem-solving skills.

Preferred Experience:

• Experience managing large fabrication facilities or business units.
• Exposure to certification-driven manufacturing environments.
• Track record of leading plant expansions, capital projects, or operational transformations.

About NR Consulting

Founded in 2005, NR Consulting is a leading global provider of workforce solutions, technology services, and recruitment strategy, trusted by Fortune 500 and mid-sized organizations across North America, Europe, and Asia. Headquartered in Boulder, Colorado, with a Global Delivery Center in India, NR Consulting partners with clients to drive innovation, accelerate business outcomes, and deliver scalable talent solutions across industries such as engineering, information technology, energy, life sciences, and manufacturing.

With a strong belief in the power of people and performance, NR Consulting has built a reputation for excellence in direct hire, contract staffing, and project-based consulting. Our commitment to integrity, diversity, and client success has enabled us to consistently deliver top-tier professionals who help businesses achieve their strategic and operational goals.

Guided by our core values — People First, Accountability, Excellence, and Partnership — we take pride in fostering long-term relationships with clients and candidates alike. Our multicultural teams work collaboratively across geographies to provide agile, high-quality, and results-driven solutions that make a measurable difference.

NR Consulting is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

This posting is not an offer of employment. All applicants applying for positions in the United States must be legally authorized to work in the United States. The submission of intentionally false or fraudulent information in response to this posting may render the applicant ineligible for the position. Any subsequent offer of employment will be considered employment at-will regardless of the anticipated assignment duration.

Job Title – Embedded Software Design Engineer - Avionics/Aviation

Location – Plano, Texas

Job Type: Full-Time

Job Description:

The work involves understanding an existing Arm-based SoC embedded software code base-including setting it up, building it, and running it. And bringing up the code and existing documentation to DO-178C DAL A standards to cover the entire safety-critical software development lifecycle: requirements, design, and test. As well as requirements traceability and configuration management.

Must have experience:

• 7+ Years experience as Embedded Software Design Engineer

• Software Development Lifecycle (SDLC) per DO-178C DAL A Safety Critical Standards

• Software Requirement Capture & Analysis

• Software Architecture & Design

• Traceability

• Updating Source Code to DO-178C

• SDLC Reviews

• DAL Level A Software Development Lifecycle Documentation

• Protocols - Ethernet, SPI, RS485, CAN, I2C, Pre-SOI Audit Experience

• Design Analysis & Report Preparation, Resolving issues

• DOORS, Git, Matissa, MS Visio, AMD Vitis, ARM C Compiler, Lauterbach Trace32

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

At Raytheon's Optics Manufacturing Center, the Manufacturing Engineering team plays a critical role in sustaining our competitive edge in the design and production of complex optical components, assemblies, and systems. We are responsible for driving operational excellence—ensuring high-quality product delivery that meets schedule, cost, and safety targets.

The Manufacturing Engineering team at our facility in Richardson TX seeks a highly skilled and motivated Optics Manufacturing Engineer to join our team. Relocation benefits are available. This is a unique opportunity to contribute to the production of advanced optical elements using state-of-the-art grinding and polishing technologies.

(NOTE: This is high-precision optics technology, not eyeglasses / eyesight related)

What You Will Do:

• Provide engineering support for the fabrication and metrology of high-precision optical windows, lenses and prisms.
• Develop and document robust manufacturing process plans that meet complex optical and mechanical specifications, while optimizing for cost, throughput, quality, and yield.
• Interpret and verify conformance of engineering drawings, specifications, work instructions, and test procedures to applicable internal and external standards.
• Support bid and proposal efforts by estimating time and resources required for manufacturing activities.
• Drive continuous improvement initiatives through data analysis and process optimization.
• Collaborate closely with manufacturing technicians on the factory floor to resolve production issues in real time.
• Specify, procure, and validate production and metrology equipment required for optical manufacturing and testing.
• Lead root cause analysis and corrective action (RCCA) efforts for product or process failures using structured problem-solving tools such as 5 Whys and Fishbone.
• Interface with cross-functional teams, program management, and customers to provide technical guidance, ensure requirements compliance, and support key project milestones.
• First / day shift position.

Qualifications You Must Have:

• Bachelor's degree in Science, Technology, Engineering, or Mathematics (STEM) or equivalent, with a minimum of 2 years of relevant engineering experience.
  • Relevant experience is providing engineering support in a precision optics manufacturing environment.
• Work history in optical manufacturing processes, including grinding, pitch polishing, and/or pad polishing techniques.
• Hands-on experience operating planetary and spindle polishing machines for optical fabrication.
• Proficiency in measuring and evaluating optical components using optical interferometry.

Qualifications We Prefer:

• Advanced degree (MS/PhD) in Mechanical Engineering, Precision Engineering, or a related field.
• Reading and interpreting engineering drawings that utilize GD&T standards and translating them into appropriate manufacturing steps.
• Hands-on expertise in operating and programming 3-axis and/or 5-axis CNC equipment using CAM software MasterCAM or comparable platforms.
• Setting up machines, executing initial runs, troubleshooting issues, and conducting post-machining inspections.
• Creating and evaluating CAD models using Creo, SolidWorks, or similar CAD software.
• Conducting root cause analysis and implementing effective corrective actions.
• Developing clear and detailed technical documentation to support manufacturing operations.
• Adapting work hours as needed to meet business and production demands.

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Relocation offered.

Learn more & apply now!

Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

#LI-Onsite

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

JOB SUMMARY

The position is broadly responsible for the development of electrical and process control systems for equipment used in the Food Processing, Pharmaceutical, Chemical, Water Treatment, Manufacturing and other industries.

Essential Functions

Essential Function

Understanding of customer's specific application and process requirements

Developing instrumentation lists, electrical wiring schematics, Bill of Materials, control panel layout, one line and point-to-point wiring diagrams.

PLC and SCADA programming

Preparing budgetary cost estimates

Supervising fabrication of control systems, performing factory and site checkout

Managing and physically participating in equipment and systems installation and startup

Developing and maintaining project documentation: drawings, Bill of Materials and equipment IOM manuals

Providing post-installation troubleshooting and technical support

Required for All Jobs

• Performs other duties as assigned

• Complies with all policies and standards

QUALIFICATIONS

Education

Education Level Education Details Req/

Pref

Associate's Degree

Bachelor's Degree Mechanical, chemical, or electrical engineering Required

Work Experience

Experience Experience Details Required/

Preferred

1-3 years

4-6 years

7-9 years

10+ years Experienced hands-on project manager with excellent electrical controls engineering, AutoCAD, PLC/SCADA programming, technical writing, and communication skills Required

Knowledge, Skills and Abilities

Industrial gases industry experience would be helpful. Good English writing and speaking skills are required.

Experienced hands-on project manager with excellent electrical controls engineering, AutoCAD, technical writing, and communication skills

Ability to read, understand and create electrical drawings, block diagrams and P&ID's

Experience in process automation, instrumentation, and PLC/SCADA systems

Comprehensive experience programming Allen-Bradley CompactLogix, ControlLogix, WonderWare and Siemens PLCs and HMI

Working knowledge of motors, blowers, pumps, and compressors

Familiarity with NEC and NFPA standards

Licenses and Certifications

Licenses/Certifications Licenses/Certification Details Time Frame Required/

Preferred

PHYSICAL DEMANDS/WORKING CONDITIONS

Physical Demands Category:

Physical Demands

A thorough completion of this section is needed for compliance with legal standards such as the Americans with Disabilities Act. The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Physical Demand N/A Rarely Occasionally Frequently Constantly Weight

Stationary Position X

Move/Traverse X

Stationary Position/Seated X

Transport/Carrying X

Exerting Force/Pushing X

Exerting Force/Pulling X

Ascend/Descend X

Balancing X

Position Self/Stooping X

Position Self/Kneeling X

Position Self/Crouching X

Position Self/Crawling X

Reaching X

Handling X

Grasping X

Feeling X

Communicate/Talking X

Communicate/Hearing X

Repetitive Motions X

Coordination X

Travel Requirements

Estimated Amount Brief Description

50% Extensive domestic travel will be required

CSI Recruiting is working with a growing, privately-held E&P company based in Dallas on their need for an experienced Senior Production Engineer. We know this company well, having staffed for them throughout the past 15 years as technical and leadership needs have arisen. The company is well respected for their operations capabilities, many decades of upstream oil & gas success, and reputation for enriching their employees.

Our client has recently completed a substantial acquisition of gas wells and a gas plant in West Texas, assets that complement prior acquisitions of other gas wells within the region.

Due to the firm's operated ownership of these additional wells, the company is seeking an experienced Senior Production Engineer to work with their current staff of engineers and field leadership personnel.

The ideal candidate will have:

• Experience working within an active E&P firm focused on the development and optimization of conventional and unconventional gas wells.
• Field Experience designing and performing production enhancement programs including Completions/Re-Completions/Production/Artificial Lifts deployment
• Experience collaborating in a small team environment and regularly communicating with field personnel. Travel to the field as needed, of course.
• Experience with compressor optimization
• Experience with pipeline de-bottlenecking

Ideally candidates will have experience working as an in-house petroleum engineer within a variety of environments. Any background working at a smaller firm, handling multiple responsibilities in a dynamic and adaptable environement would be preferred.

This is a can-do company, renowned for their ability to take on challenging projects and build value through both acquisition and engineering. Once settled in, people stay at this firm for decades, building personal wealth and increased technical acumen.

The Injection Molding Process Engineer II is responsible for leading process development, optimization, and continuous improvement activities within our injection molding operations. This role supports our vision of becoming a center of excellence for medical‐grade molding by applying scientific molding principles, ensuring regulatory compliance, and driving high‐quality, data‐driven manufacturing performance.

Key Responsibilities

• Lead injection molding process development, optimization, and documentation activities to support production efficiency and product quality.

• Apply scientific molding techniques to achieve consistent part quality, reduce defects, and optimize cycle times.

• Conduct molding validations (IQ, OQ, PQ) in accordance with medical device regulatory requirements and internal quality standards.

• Troubleshoot molding issues using structured problem‐solving tools, including root‐cause analysis and FMEA.

• Maintain accurate and detailed process documentation to ensure traceability, audit readiness, and compliance.

• Collaborate closely with Quality, R&D, Regulatory, and Production teams to support new product introductions and ongoing manufacturing improvements.

Support continuous improvement initiatives using SPC, DOE, Lean, and Six Sigma methodologies.

Review and interpret AutoCAD/SolidWorks drawings to support tooling, process setup, and engineering changes.

Qualifications:

• Bachelor's degree in Engineering, Chemical Engineering, or related technical field.

• 4–6 years of experience in plastic injection molding, preferably within the medical device industry.

• Completion of a Scientific Molding course (e.g., RJG Fundamentals of Systematic Molding) preferred.

• Strong understanding of medical‐grade polymers, molding equipment, and process control methodologies.

• Experience working in regulated manufacturing environments.

• Proficiency in data‐driven process monitoring and analysis.

• Excellent communication and cross‐functional collaboration skills.

Preferred Attributes:

• Continuous improvement mindset with demonstrated success implementing process enhancements.

• High attention to detail and strong documentation discipline.

• Commitment to product quality, patient safety, and ethical decision making.

• Plastic experience required. Master Molder certification preferred.

• Decoupled Molding Principles

• Project Management

• Requires good communication, people skills to work well with other departments, customers.

• 10+ Year in Plastic Manufacturing Industry

• Ability to write technical reports and prepare and make effective presentations

Baer is looking for Quality Engineer for a 6+ month project located in Irving, TX

Title: Quality Engineer

Location: Hybrid – Irving, TX (3 days per week onsite)

Duration: 6 months

Rate: All-Inclusive

Alignment: W2 (C2C Not Permitted)

Overview

We are seeking a Quality Engineer to support a large-scale healthcare platform focused on ERP integrations and platform stability. In this role, you will validate complex data flows, APIs, and event-driven systems that support critical business processes. You will work closely with Engineering and Product teams in an Agile environment to ensure reliable, high-quality platform performance.

Description

• Test ERP integrations, APIs, and complex data flows across systems.
• Design and execute test strategies for platforms integrating with SAP, Workday, Oracle, Infor, or similar ERP systems.
• Build and maintain automated tests using Playwright, Postman/Newman, REST Assured, Cypress, or similar tools.
• Perform API, functional, regression, and performance testing.
• Use SQL to validate data transformations and backend pipelines.
• Test event-driven systems such as Azure Event Hub, Service Bus, or Kafka.
• Create and maintain test plans, cases, and defect documentation.
• Collaborate with Engineering and Product teams in Agile ceremonies and quality planning.

Requirements

• Experience testing ERP-integrated and data-intensive systems.
• Hands-on experience with test automation frameworks and API testing tools.
• Strong SQL skills for backend data validation.
• Experience testing distributed or event-driven architectures.
• Solid understanding of Agile/Scrum methodologies.
• Strong analytical, troubleshooting, and communication skills.

Preferred

• Experience in healthcare or regulated industries.
• Experience improving test automation frameworks or strategies.
• Familiarity with AI-assisted testing or workflow automation tools.

Company Overview:

Baer provides best-in-class engagement experiences for our consultants. Our job requirements are carefully vetted and are typically associated with pivotal programs offering tremendous opportunities to expand your skills leveraging the latest solutions.

Baer is an equal opportunity employer including disability/veteran.

ALL OPEN JOBS

Position Summary:

Perform broad support engineering functions for engineering group in assistance to project and product related taskings from Engineering Management for the thermal product line. Enable successful task completion to produce technical value from the company.

Applies knowledge and understanding of process, mechanical, electrical, and civil engineering to form documents, calculations, and drawings. Manages projects on multiple technologies, and contracts as required. Aids in procurement, document control and other technical administration functions. Develops new suppliers and supply philosophies for thermal products.

ESSENTIAL FUNCTIONS

• Aids in growth of company with a focus on wastewater business line technical services, ranging from Biosolids treatment to conveyance and disposal management.
• Engages clients in meaningful discussions about their most critical issues and translates those discussions into opportunities to deliver complete Project solutions. Captures technical notes.
• Actively participate in pursuit decisions, and in proposal and pricing development.
• Engage and develop relationships with key Industry partners including Vendors, Contractors and Licensing agreements that can help advance position in the marketplace.
• Responsible for collecting all regulatory required data, compiling regulatory reports, maintaining files of analysis results and regulatory reports and coordinating research.
• Manage the technical aspect of projects through the engineering process by assigning work, controlling standards, and evaluating results while controlling engineering costs. Reporting on any variations to management.
• Assist in developing Vendor document requirements, Equipment submittals, Drawing Packages, O&M Manuals.
• Works in close collaboration with the Engineering Team and Product Manager.
• Troubleshoots and/or reviews wastewater treatment processes and facility designs; evaluates process technologies; performs initial data gathering, analysis of the existing systems, initial process design.
• Develops and maintains new procurement philosophy for the thermal product line.
• Develops alternative suppliers for industrial equipment.
• Aids in process hazard assessments, safety in designs.
• Aids in generating new ideas for product improvement, reliability, and cost reduction.
• Forming, maintaining, and improving standard designs of technologies for repeatability
• Aids in management of change planning.
• Responsible for managing documents in the document control process.
• Develop and provide ISA data sheets, engineering descriptions, preliminary/final engineering designs, and recommendations for process upgrades.
• Work across teams that provide solutions to client's needs.
• Performs any other duties related to Technical/Engineering as directed by the Senior Project Engineer or Director of Engineering.
• Assists in application design
• Tracks changes of design (manages change) on project documents such as P&ID, PFD, Mechanical Design Drawings, Electrical Design drawings.
• Assigns and tracks work required for project execution to a wide range of professionals (Mechanical Design, Electrical Design, Outside Vendors)

Minimum Requirements:

• BS Mechanical, Civil, or Chemical Engineering degree preferred, others suitable with commensurate experience.
• 7+ years of experience working with water and/or wastewater treatment plants and equipment
• Excellent proficiency to read, write, and understand the English language.
• Climb stairs and ladders, comfortable working at heights.
• Travel up to 25%, potential.
• >2 years of experience in working and interacting with customers and vendors.
• >2 years of experience in developing budgets, schedules, plans, and forecasts.
• Skilled in MS Excel, MS Word, MS Project, MS PowerPoint, and AutoCAD products.

Desired Skills:

• Knowledge of Engineering Document Control standards
• Experience with use of management of change controls for engineering documentation
• 5+ years' experience in Project Management for Industrial Equipment
• 5+ years forming process engineering documents such as P&IDs, Equipment Datasheets, Functional Descriptions, Submittals and Project Schedules, Document Indexes etc.
• Experience in speaking effectively before groups of customers or employees of an organization.
• Experience defining problems, collecting data, establishing facts, and drawing valid conclusions.
• Experience in Supply Chain, Supplier evaluation, Negotiation, and supplier accountability
• Experience using Smart Sheets