✓ Engineering ✕ Clear
Engineering Jobs in Texas Flexible
198 positions found — Page 3
Senior Structural Dynamics Engineer
✦ New
Salary not disclosed
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Senior Structural Dynamics Engineer
Job Code: 32935
Job Location: Waco, TX (Onsite)
Job Schedule: 9/80
Job Description:
L3Harris MMG Division is seeking a Senior Structural Dynamics Engineer for our onsite facility located in Waco, TX. The Structural Dynamics Engineer Lead will perform dynamic analysis and provide test (ground and flight) support for fixed wing and rotary aircraft to determine dynamic loads and/or dynamic characteristics of primary and secondary aircraft structure.
We are seeking a subject matter expert with comprehensive knowledge of Structural Dynamics, and in-depth knowledge of project management.
Essential Functions:
* Ability to obtain and maintain a DoD Secret security clearance.
* Perform frequency response, modal, and similar dynamic analyses.
* Planning, support, and execution of Ground Vibration and Modal Survey Tests.
* Planning and support of Flutter and Other Flight Tests.
* Flight test data collection and reduction.
* Manage large, complex project initiatives of substantial importance to the organization with minimal oversight or direction.
* Communicate within and outside of the organization to explain and influence changes to practices, processes and approaches.
* Make significant improvements in processes, systems, or products.
* Provide input into new products/processes and implements operational plans that have measurable impact on business or functional results.
* Strong understanding of Finite Element Modeling theory.
* Willingness and ability to travel occassionally when required.
* Willingness and ability to work any shift, weekends, and overtime as required to meet company objectives.
Qualifications:
* Bachelor's Degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering, or similar and minimum 9 years of prior aircraft structural dynamics related experience. Graduate Degree in Mechanical Engineering, Aerospace Engineering, or similar and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience.
* Minimum 2 years experience in finite element modeling and analyses codes.
* Must be a US citizen.
Preferred Additional Skills:
* Experience with MSC PATRAN/NASTRAN or FEMAP.
* Experience in Matlab/Simulink is a plus.
* Experience in explicit, non-linear analysis such as birdstrike is a plus.
* Experience in aeroelastic analyses is a plus.
* Proficient in Microsoft Office, and have general computer knowledge.
* Good verbal and written communication skills.
#LI-AS1
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English ( ) or Spanish ( ) . For information regarding your Right To Work, please click here for English ( ) or Spanish ( ) .
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Senior Structural Dynamics Engineer
Job Code: 32935
Job Location: Waco, TX (Onsite)
Job Schedule: 9/80
Job Description:
L3Harris MMG Division is seeking a Senior Structural Dynamics Engineer for our onsite facility located in Waco, TX. The Structural Dynamics Engineer Lead will perform dynamic analysis and provide test (ground and flight) support for fixed wing and rotary aircraft to determine dynamic loads and/or dynamic characteristics of primary and secondary aircraft structure.
We are seeking a subject matter expert with comprehensive knowledge of Structural Dynamics, and in-depth knowledge of project management.
Essential Functions:
* Ability to obtain and maintain a DoD Secret security clearance.
* Perform frequency response, modal, and similar dynamic analyses.
* Planning, support, and execution of Ground Vibration and Modal Survey Tests.
* Planning and support of Flutter and Other Flight Tests.
* Flight test data collection and reduction.
* Manage large, complex project initiatives of substantial importance to the organization with minimal oversight or direction.
* Communicate within and outside of the organization to explain and influence changes to practices, processes and approaches.
* Make significant improvements in processes, systems, or products.
* Provide input into new products/processes and implements operational plans that have measurable impact on business or functional results.
* Strong understanding of Finite Element Modeling theory.
* Willingness and ability to travel occassionally when required.
* Willingness and ability to work any shift, weekends, and overtime as required to meet company objectives.
Qualifications:
* Bachelor's Degree in Mechanical Engineering, Aerospace Engineering, Civil Engineering, or similar and minimum 9 years of prior aircraft structural dynamics related experience. Graduate Degree in Mechanical Engineering, Aerospace Engineering, or similar and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience.
* Minimum 2 years experience in finite element modeling and analyses codes.
* Must be a US citizen.
Preferred Additional Skills:
* Experience with MSC PATRAN/NASTRAN or FEMAP.
* Experience in Matlab/Simulink is a plus.
* Experience in explicit, non-linear analysis such as birdstrike is a plus.
* Experience in aeroelastic analyses is a plus.
* Proficient in Microsoft Office, and have general computer knowledge.
* Good verbal and written communication skills.
#LI-AS1
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English ( ) or Spanish ( ) . For information regarding your Right To Work, please click here for English ( ) or Spanish ( ) .
Not Specified
A
Senior Drainage / Stormwater Leader – City of Austin Focus (15+ Years)
✦ New
Salary not disclosed
Senior Drainage / Stormwater Leader – City of Austin Focus (15+ Years)
Austin, TX | Hybrid (3 days office / 2 days remote)
A growing civil engineering firm is seeking a Senior Engineering Leader to strengthen relationships with the City of Austin and lead complex stormwater, drainage, and flood control projects. This role will provide senior technical leadership, mentor engineers, and help expand the firm’s presence across major municipal infrastructure programs.
Key Responsibilities
- Lead and manage stormwater, drainage, and H&H infrastructure projects
- Serve as a key technical and strategic partner to the City of Austin
- Support business development, proposals, and client relationships
- Mentor and guide mid- and senior-level engineers
- Oversee project scope, schedule, budget, and technical quality
Project Work
Current work includes a major progressive design-build light rail project in Austin, supporting drainage and water quality design across multiple segments. Work includes storm drain design, culverts, water quality infrastructure, and development of 50% design through final construction documents and construction support.
Qualifications
- Bachelor’s in Civil or Environmental Engineering
- Texas PE required
- 15+ years of experience in stormwater, drainage, or H&H engineering
- Experience with HEC-HMS, HEC-RAS, and GIS tools
- Background working with municipal/public-sector clients
Compensation
$120,000 – $200,000+ depending on experience, plus full benefits and bonus potential.
Not Specified
I
Senior FPGA Design Engineer
✦ New
Salary not disclosed
Job Description:
Mandatory Skills:
- 7+ years Senior engineer with emphasis on FPGA design, development, and testing
- Develop requirements, design documentation, and test documentation
- Perform VHDL analysis, develop test bench, simulation, and on-target testing
- Perform FPGA Synthesis, place, route and timing analysis of FPGA designs
Primary Skills:
- Strong technical knowledge related to FPGA development and verification
- Knowledge of chip architecture and design, FPGA tool flow, VHDL, Python/Perl/Tcl, and debugging.
- Solid understanding of industry standard interfaces (e.g, DDR, PCI, I2C, UART and Ethernet, etc.)
- Proven ability to complete tasks and helping team members
- Excellent hardware and software debugging skills
- Familiar with test equipment (e.g. oscilloscopes, logic analysers)
- Working knowledge of Xilinx development tools set
- Working knowledge with LabVIEW and LabVIEW a plus
- Have familiarity with DO-254 process
Not Specified
H
Electrical Engineer (MEP Building Systems)
✦ New
Salary not disclosed
MEP Electrical Design Engineer
Dallas, TX | Hybrid Work Environment
HC Solutions Group Recruiting Partner
About the Role
HC Solutions Group is recruiting for a full-time MEP Electrical Design Engineer with a respected and growing MEP consulting firm in Dallas, TX. This is a permanent position focused on electrical building systems design within a collaborative hybrid work environment that combines in office teamwork with flexible remote options.
About the Client
Our client is a mid sized MEP engineering firm known for its positive culture, strong leadership presence, and excellent reputation across the region. The firm maintains a steady pipeline of projects supported by long term, trusted clients. Team members enjoy a supportive atmosphere, opportunities for advancement, and exposure to a wide range of building types.
Responsibilities
• Electrical building systems design including power, lighting, fire alarm, and related systems
• Preparation of drawings, specifications, and design documents
• Collaboration with internal mechanical and plumbing teams along with architects and structural partners
• Participation in project coordination meetings and occasional site visits
• Ensuring code compliance and alignment with client needs
• Contributing to project delivery, quality, and team communication
Qualifications
• Degree in Electrical Engineering or related discipline
• Experience with electrical building systems within consulting or MEP settings
• EIT required
• Comfort working in a hybrid arrangement with in office collaboration and remote flexibility
• Strong communication skills and an interest in contributing to a team focused environment
• Revit and AutoCAD experience is helpful
Pay and Benefits
• Competitive market salary with annual performance bonus potential
• Hybrid work structure with flexible scheduling
• Health, dental, vision, retirement plan, PTO, and paid holidays
• Professional development support including mentoring and licensure pathways
• Modern office environment in Raleigh with strong team culture
Why Join
• Work on a diverse range of project types within a respected MEP firm
• Be part of a growing team with strong leadership and supportive mentorship
• Enjoy a hybrid schedule that balances collaboration with flexibility
• Join a company with an excellent reputation and consistent workload
• Long term career growth in a stable, people oriented environment
Why Apply Through HC Solutions Group
• Direct access to hiring managers
• Streamlined and efficient hiring process
• Recruiter advocacy and representation throughout the process
• Access to additional engineering opportunities with a single application
• Over 30 years of permanent placement success
• Full time, permanent positions only
Not Specified
G
IAM Engineer
✦ New
Salary not disclosed
- Hands-on GCP IAM experience (roles, service accounts, policy inheritance concepts).
- Terraform fundamentals (modules, state basics) and Git/PR workflow discipline.
- Scripting ability (Python) for automation/validation tasks.
- Familiarity with change/release processes and working in controlled environments.
- Success measures
- Onboarded apps meet access-control standards with minimal rework; IAM incidents reduced; evidence is audit-ready
Not Specified
N
O&G Terminals Controls Engineer - Remote/Travel
Salary not disclosed
Position Summary: Remote/Office based with up to 25% travel Need to be located in MST or CST Timezone HFS Midstream is seeking an experienced Controls Engineer to support product distribution terminals across our enterprise.
This role focuses on the design, construction, and modification of pipeline and terminal facilities, with an emphasis on electrical and instrumentation systems(PLC's, ProLogic, Flow Meters, Acculode to Multilode) at the terminals.
The Engineer will serve as a technical specialist, developing scopes of work, engineering designs, and collaborating with interdisciplinary teams to deliver safe, efficient, and compliant projects.
Essential Duties and Responsibilities • System Design & Modification: Engineer electrical and instrumentation systems for new facilities and upgrades to existing pipeline and terminal infrastructure.
Does not need an expert in CAD • Standards Compliance: Apply NEC, NFPA, API standards, and other applicable codes to ensure safe and reliable operations.
• Control Systems Integration: Design and implement process control systems, including SCADA, PLCs, Terminal Management Systems, IT/OT considerations, and hazardous area classifications.
• Technical Documentation: Develop logic diagrams, cause-and-effect matrices, control narratives, and detailed wiring and termination drawings.
• Project Scoping: Define technical requirements and scope of work in collaboration with stakeholders.
• Electrical Engineering: Design low- and medium-voltage power distribution systems, control circuits, and instrumentation wiring for PLC's and Flow Meters.
Currently using Acculode • Procurement & Costing: Prepare equipment specifications, procurement packages, and cost estimates for budgeting purposes.
• Operational Support: Troubleshoot technical issues and assist with commissioning and Pre-Startup Safety Reviews (PSSR).
• Vendor Coordination: Review and evaluate vendor proposals for equipment purchases and modernization projects.
• Continuous Improvement: Stay current with emerging technologies and best practices in electrical and instrumentation engineering.
Experience: • Minimum 5 years of industrial experience in electrical and instrumentation design for pipeline and terminal facilities.
• Proficiency in electrical schematics, wiring diagrams, conduit layouts, instrumentation loops, and PLC hardware.
• Experience selecting electrical equipment for classified areas.
Preferred: • Professional Engineer (PE) registration.
Education: • Bachelor's degree in Electrical Engineering or Controls Engineering (or equivalent).
• Ten years of applicable experience preferred.
Skills and Competencies • Ability to interpret P&IDs, electrical one-line diagrams, and instrument drawings.
• Expertise in hazardous location wiring practices, panel design, and PLC hardware.
• Strong communication, organizational, and time-management skills.
• Advanced mathematical and analytical capabilities.
• Preferred: Familiarity with Toptech and DTN loading systems.
Work Conditions • Office/Remote-based with up to 25% travel.
• Exposure to varying weather conditions; ability to work outdoors.
• Physical requirements include lifting up to 50 lbs, climbing up to 200 ft, and working in confined spaces.
Remote working/work at home options are available for this role.
This role focuses on the design, construction, and modification of pipeline and terminal facilities, with an emphasis on electrical and instrumentation systems(PLC's, ProLogic, Flow Meters, Acculode to Multilode) at the terminals.
The Engineer will serve as a technical specialist, developing scopes of work, engineering designs, and collaborating with interdisciplinary teams to deliver safe, efficient, and compliant projects.
Essential Duties and Responsibilities • System Design & Modification: Engineer electrical and instrumentation systems for new facilities and upgrades to existing pipeline and terminal infrastructure.
Does not need an expert in CAD • Standards Compliance: Apply NEC, NFPA, API standards, and other applicable codes to ensure safe and reliable operations.
• Control Systems Integration: Design and implement process control systems, including SCADA, PLCs, Terminal Management Systems, IT/OT considerations, and hazardous area classifications.
• Technical Documentation: Develop logic diagrams, cause-and-effect matrices, control narratives, and detailed wiring and termination drawings.
• Project Scoping: Define technical requirements and scope of work in collaboration with stakeholders.
• Electrical Engineering: Design low- and medium-voltage power distribution systems, control circuits, and instrumentation wiring for PLC's and Flow Meters.
Currently using Acculode • Procurement & Costing: Prepare equipment specifications, procurement packages, and cost estimates for budgeting purposes.
• Operational Support: Troubleshoot technical issues and assist with commissioning and Pre-Startup Safety Reviews (PSSR).
• Vendor Coordination: Review and evaluate vendor proposals for equipment purchases and modernization projects.
• Continuous Improvement: Stay current with emerging technologies and best practices in electrical and instrumentation engineering.
Experience: • Minimum 5 years of industrial experience in electrical and instrumentation design for pipeline and terminal facilities.
• Proficiency in electrical schematics, wiring diagrams, conduit layouts, instrumentation loops, and PLC hardware.
• Experience selecting electrical equipment for classified areas.
Preferred: • Professional Engineer (PE) registration.
Education: • Bachelor's degree in Electrical Engineering or Controls Engineering (or equivalent).
• Ten years of applicable experience preferred.
Skills and Competencies • Ability to interpret P&IDs, electrical one-line diagrams, and instrument drawings.
• Expertise in hazardous location wiring practices, panel design, and PLC hardware.
• Strong communication, organizational, and time-management skills.
• Advanced mathematical and analytical capabilities.
• Preferred: Familiarity with Toptech and DTN loading systems.
Work Conditions • Office/Remote-based with up to 25% travel.
• Exposure to varying weather conditions; ability to work outdoors.
• Physical requirements include lifting up to 50 lbs, climbing up to 200 ft, and working in confined spaces.
Remote working/work at home options are available for this role.
Not Specified
D
Engineer, Quality Complaint Investigation (CAPA) - Hybrid
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Engineer, Quality Complaint Investigation (CAPA)
- Hybrid Duration: 9 Months Location: Hybrid at Skaneateles, NY Local candidates preferred Will consider relocation candidates Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: I.
SUMMARY: This description outlines the employment prerequisites and job responsibilities for the position of Engineer, Quality Complaint Investigation.
II.
ESSENTIAL FUNCTIONS: This position has primary responsibility for investigation, review, and completion of all Quality Engineering complaint issue analysis tasks utilizing various quality system inputs.
Review individual complaints and associated service data to determine risk level and complete investigation into the as determined problem code and cause codes for each complaint.
Analyze data from various quality inputs (including but not limited to: Field Corrective Action (FCA), Complaints, FDA Medical Device Reports (MDR), etc.) to determine trends and systemic issues.
Prepare and issue reports based on information analysis.
Review existing investigation reports and identify gaps for GMP compliance.
Develop strategies and plans to close the gaps in an efficient and technical manner.
Develop and communicate expectations for quality performance, continuous improvement, and process controls for marketed products.
Monitor and drive corrective action and continuous improvement activities that directly impact performance measures by performing primary investigations, conducting data analysis, and implementing corrective actions.
Conduct or lead corrective and preventive actions in manufacturing using formal problem-solving tools and documentation.
Support CAPA and maintenance activities for existing product lines.
Recommend and/or support projects for improvements to the quality system as approved by management.
III.
QUALIFICATIONS, KNOWLEDGE, AND SKILLS REQUIRED Medical Device Experience with knowledge of 21CFR820 preferred.
Investigational research skills Experience with any statistical software packages (Minitab a plus) Desired experience in the medical device industry in the development and deployment of Quality Systems, process controls, and continuous improvement methods.
Knowledge and working application of FDA cGMP; ANSI/ISO/ASQC requirements; CMDAS (optional).
Knowledge and working application of reading and understanding blueprints and technical drawings.
Demonstrated strong analytical problem-solving (Root Cause Investigations.
Display a solid technical understanding of engineering principles and procedures (e.g., CAD and its application or scheduling a series of technical tasks utilizing software-based tools).
Computer competency in Word, Excel, PowerPoint, Minitab, Access, and databases.
Ability to multitask and methodically manage projects.
IV.
EDUCATION/EXPERIENCE REQUIRED A Bachelor of Science degree in Engineering 1-3 years of Medical Device experience V.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee: Must be able to sit for long periods of time Must have good hand-to-eye coordination and dexterity Physical Requirements: Dynamic Lifting capability: Must have the ability to lift 40 pounds at a time.
VI.
WORK ENVIRONMENT Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
This is a manufacturing environment regulated by the FDA and many other work rules to prevent damage to the product we manufacture.
Some of those work rules include, but are not limited to: Wearing a static protective smock at all times while in the work area Wearing a ground wrist strap and plugging that wrist strap into the working table.
Working in proximity to other employees.
Working in an environment that is temperature and humidity-controlled.
Responsibilities: Will be addressing customer complaints and leading complaints investigation.
Identify RCA.
Collaborates with the Engineer, Product service teams and follow-up on service updates.
Quality experience is preferred 2 years would be ideal.
Good to have experience in technical writing and handling class ii medical device.
Will be writing customer feedback letter addressing customer issues and root-cause findings.
Will support the functions of NCQ, CAPA, Audit.
Current team has 2 perm, 3 contract, backfill will be for the 3rd.
Getting about 1000 complaints a month, want to keep it less than 100 actions a week.
Looking for a good communicator who is good at follow-ups.
Proficiency with SAP, ETQ, Trackwise will be preferred.
Will be onsite for Team meeting, addressing complaints, once a month data trending, warehouse visits when required.
Education: Bachelors is a must have.
Interview: Remote/ virtual screening with final onsite interview.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP, Medical Device, Quality Systems, EtQ
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Engineer, Quality Complaint Investigation (CAPA)
- Hybrid Duration: 9 Months Location: Hybrid at Skaneateles, NY Local candidates preferred Will consider relocation candidates Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: I.
SUMMARY: This description outlines the employment prerequisites and job responsibilities for the position of Engineer, Quality Complaint Investigation.
II.
ESSENTIAL FUNCTIONS: This position has primary responsibility for investigation, review, and completion of all Quality Engineering complaint issue analysis tasks utilizing various quality system inputs.
Review individual complaints and associated service data to determine risk level and complete investigation into the as determined problem code and cause codes for each complaint.
Analyze data from various quality inputs (including but not limited to: Field Corrective Action (FCA), Complaints, FDA Medical Device Reports (MDR), etc.) to determine trends and systemic issues.
Prepare and issue reports based on information analysis.
Review existing investigation reports and identify gaps for GMP compliance.
Develop strategies and plans to close the gaps in an efficient and technical manner.
Develop and communicate expectations for quality performance, continuous improvement, and process controls for marketed products.
Monitor and drive corrective action and continuous improvement activities that directly impact performance measures by performing primary investigations, conducting data analysis, and implementing corrective actions.
Conduct or lead corrective and preventive actions in manufacturing using formal problem-solving tools and documentation.
Support CAPA and maintenance activities for existing product lines.
Recommend and/or support projects for improvements to the quality system as approved by management.
III.
QUALIFICATIONS, KNOWLEDGE, AND SKILLS REQUIRED Medical Device Experience with knowledge of 21CFR820 preferred.
Investigational research skills Experience with any statistical software packages (Minitab a plus) Desired experience in the medical device industry in the development and deployment of Quality Systems, process controls, and continuous improvement methods.
Knowledge and working application of FDA cGMP; ANSI/ISO/ASQC requirements; CMDAS (optional).
Knowledge and working application of reading and understanding blueprints and technical drawings.
Demonstrated strong analytical problem-solving (Root Cause Investigations.
Display a solid technical understanding of engineering principles and procedures (e.g., CAD and its application or scheduling a series of technical tasks utilizing software-based tools).
Computer competency in Word, Excel, PowerPoint, Minitab, Access, and databases.
Ability to multitask and methodically manage projects.
IV.
EDUCATION/EXPERIENCE REQUIRED A Bachelor of Science degree in Engineering 1-3 years of Medical Device experience V.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee: Must be able to sit for long periods of time Must have good hand-to-eye coordination and dexterity Physical Requirements: Dynamic Lifting capability: Must have the ability to lift 40 pounds at a time.
VI.
WORK ENVIRONMENT Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
This is a manufacturing environment regulated by the FDA and many other work rules to prevent damage to the product we manufacture.
Some of those work rules include, but are not limited to: Wearing a static protective smock at all times while in the work area Wearing a ground wrist strap and plugging that wrist strap into the working table.
Working in proximity to other employees.
Working in an environment that is temperature and humidity-controlled.
Responsibilities: Will be addressing customer complaints and leading complaints investigation.
Identify RCA.
Collaborates with the Engineer, Product service teams and follow-up on service updates.
Quality experience is preferred 2 years would be ideal.
Good to have experience in technical writing and handling class ii medical device.
Will be writing customer feedback letter addressing customer issues and root-cause findings.
Will support the functions of NCQ, CAPA, Audit.
Current team has 2 perm, 3 contract, backfill will be for the 3rd.
Getting about 1000 complaints a month, want to keep it less than 100 actions a week.
Looking for a good communicator who is good at follow-ups.
Proficiency with SAP, ETQ, Trackwise will be preferred.
Will be onsite for Team meeting, addressing complaints, once a month data trending, warehouse visits when required.
Education: Bachelors is a must have.
Interview: Remote/ virtual screening with final onsite interview.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
SAP, Medical Device, Quality Systems, EtQ
Remote working/work at home options are available for this role.
Not Specified
D
Sr Analytics Implementation Engineer (Web and Mobile) - Remote
🏢 DivIHN Integration Inc
Salary not disclosed
DivIHN (pronounced “divine”) is a CMMI ML3-certified Technology and Talent solutions firm.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Lavanya, at (224) 369-0873 Title: Sr Analytics Implementation Engineer (Web and Mobile)
- Remote Location: Remote Duration: 2 Months Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Preferred Time Zone: Eastern or central preferred, but any US time zone is fine Purpose of Role The Analytics Technology branch of the Business Analytics Team focuses on data capture, tool administration, and data architecture/enablement of global web and mobile app data for client The mission of Analytics Technology is to govern, centralize, and democratize eComm data sources to enable a holistic view of our shoppers (not just buyers).
This foundation enables running analytics at scale, eComm insights, and advancing the capabilities of all analytics teams.
As an Analytics Engineer, you will: Support platform migration projects by preventing and resolving analytics tracking issues on websites and native apps.
Implement and enhance analytics tracking on all platforms.
Debug and troubleshoot configurations and integrations Adobe MobileSDK and Kotlin KMP, clearly communicating findings to responsible teams.
Lead or support the upgrade of analytics implementations ensuring data continuity, privacy compliance, and performance optimization.
QualificationsRequired Passionate about data and a champion for analytics governance and enablement to support 300 global business users.
Extensive experience with tag managers, specifically Tealium and Adobe Data Collection (Launch).
Skilled at performing and documenting beacon tests using Adobe Assurance, AEP Debugger, and Omnibug.
Reliable partner with strong communication and collaboration skills.
Expert at troubleshooting and debugging web/mobile analytics implementations.
Experience validating tagging implementations using Adobe Workspace.
Familiarity with data layers, tag management, processing rules, and mobile SDK context data variables.
Hands-on experience upgrading analytics implementations through platform and library transitions Differentiators Demonstrated experience in process improvement and documentation.
Experience with Kotlin Multiplatform for mobile analytics implementations or cross-platform tagging strategies.
Ability to create tagging business requirements and collaborate with developers.
Strong bridge between business and technical teams, with attention to detail.
Experience with workflow tools like Atlassian JIRA or Asana.
Experience extracting/analyzing hit-level data in SQL.
Working knowledge of Adobe Analytics reporting tools: Analysis Workspace, Data Warehouse, Processing Rules, and Classifications.
Experience with Kotlin Multiplatform for mobile analytics implementations or cross-platform tagging strategies Team Size: Our team has 3 existing people.
This engineer will work with Dev and Engineering teams as well.
Required Technologies: Adobe Experience Platform (AEP) Mobile SDK, AEP Assurance Preferred (Nice-to-Have) Technologies: Android development,iOS development, Kotlin Multiplatform (KMP), lifecycle and navigation-based tracking, Mobile data layer design Minimum Years of Experience Required: 3 Training Duration: 1-5 days, depending on experience.
We expect this person to contribute almost immediately Travel Requirements (If Any): None Interview Process: Group/individual interviews.
Possibly a questionnaire to pre-screen applicants About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
mobile SDK, Adobe Experience Platform
Remote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact our Talent Specialist, Lavanya, at (224) 369-0873 Title: Sr Analytics Implementation Engineer (Web and Mobile)
- Remote Location: Remote Duration: 2 Months Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered Preferred Time Zone: Eastern or central preferred, but any US time zone is fine Purpose of Role The Analytics Technology branch of the Business Analytics Team focuses on data capture, tool administration, and data architecture/enablement of global web and mobile app data for client The mission of Analytics Technology is to govern, centralize, and democratize eComm data sources to enable a holistic view of our shoppers (not just buyers).
This foundation enables running analytics at scale, eComm insights, and advancing the capabilities of all analytics teams.
As an Analytics Engineer, you will: Support platform migration projects by preventing and resolving analytics tracking issues on websites and native apps.
Implement and enhance analytics tracking on all platforms.
Debug and troubleshoot configurations and integrations Adobe MobileSDK and Kotlin KMP, clearly communicating findings to responsible teams.
Lead or support the upgrade of analytics implementations ensuring data continuity, privacy compliance, and performance optimization.
QualificationsRequired Passionate about data and a champion for analytics governance and enablement to support 300 global business users.
Extensive experience with tag managers, specifically Tealium and Adobe Data Collection (Launch).
Skilled at performing and documenting beacon tests using Adobe Assurance, AEP Debugger, and Omnibug.
Reliable partner with strong communication and collaboration skills.
Expert at troubleshooting and debugging web/mobile analytics implementations.
Experience validating tagging implementations using Adobe Workspace.
Familiarity with data layers, tag management, processing rules, and mobile SDK context data variables.
Hands-on experience upgrading analytics implementations through platform and library transitions Differentiators Demonstrated experience in process improvement and documentation.
Experience with Kotlin Multiplatform for mobile analytics implementations or cross-platform tagging strategies.
Ability to create tagging business requirements and collaborate with developers.
Strong bridge between business and technical teams, with attention to detail.
Experience with workflow tools like Atlassian JIRA or Asana.
Experience extracting/analyzing hit-level data in SQL.
Working knowledge of Adobe Analytics reporting tools: Analysis Workspace, Data Warehouse, Processing Rules, and Classifications.
Experience with Kotlin Multiplatform for mobile analytics implementations or cross-platform tagging strategies Team Size: Our team has 3 existing people.
This engineer will work with Dev and Engineering teams as well.
Required Technologies: Adobe Experience Platform (AEP) Mobile SDK, AEP Assurance Preferred (Nice-to-Have) Technologies: Android development,iOS development, Kotlin Multiplatform (KMP), lifecycle and navigation-based tracking, Mobile data layer design Minimum Years of Experience Required: 3 Training Duration: 1-5 days, depending on experience.
We expect this person to contribute almost immediately Travel Requirements (If Any): None Interview Process: Group/individual interviews.
Possibly a questionnaire to pre-screen applicants About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
mobile SDK, Adobe Experience Platform
Remote working/work at home options are available for this role.
Not Specified
J
Process Piping Engineer - Remote- Direct hire!!
🏢 Jobot
Salary not disclosed
Process Piping Engineer
- Hybrid
- Direct hire!! This Jobot Job is hosted by: Brandon DeDeker Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $80,000
- $130,000 per year A bit about us: We are a boutique, progressive, and growing engineering and project management firm committed to delivering smart solutions that positively impact our clients' lives.
We are looking to add a piping designer to our growing piping group! Why join us? Exciting opportunity to work on a wide range of projects Collaborate with diverse teams of engineers from other disciplines and industries.
Manage projects to meet critical deadlines and engineering budgets.
Opportunity for professional growth and development.
Work with a team of exceptional individuals who share a passion for innovation and customer satisfaction.
Job Details Work with vendors, clients and the internal team to determine the piping design needs Responsibilities: Assist in designing and laying out projects under the guidance of a Lead Designer or Engineer.
Proficiently use AutoCAD Plant3D and/or Solid Edge for 3D modeling, utilizing provided Point Cloud 3D scans for engineering packages.
Create equipment layout, piping layout, general arrangement drawings, piping isometrics, and P&ID drawings.
Conduct fieldwork, including walk downs of current systems, locating tie-ins, and taking measurements.
Document detailed field notes that are easily understandable by others.
Design piping systems based on project scope using P&ID's and specifications, adhering to applicable design standards.
Review project parameters related to piping requirements.
Develop preliminary Bills of Materials for piping design.
Office-based work with occasional short-term field assignments.
Qualifications: Associates degree in mechanical/process design with 3-D modeling.
Preferred minimum of 8 years of experience.
Working knowledge of industry-standard drafting practices, good mechanical aptitude, and general knowledge of Piping Engineering.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
- Hybrid
- Direct hire!! This Jobot Job is hosted by: Brandon DeDeker Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $80,000
- $130,000 per year A bit about us: We are a boutique, progressive, and growing engineering and project management firm committed to delivering smart solutions that positively impact our clients' lives.
We are looking to add a piping designer to our growing piping group! Why join us? Exciting opportunity to work on a wide range of projects Collaborate with diverse teams of engineers from other disciplines and industries.
Manage projects to meet critical deadlines and engineering budgets.
Opportunity for professional growth and development.
Work with a team of exceptional individuals who share a passion for innovation and customer satisfaction.
Job Details Work with vendors, clients and the internal team to determine the piping design needs Responsibilities: Assist in designing and laying out projects under the guidance of a Lead Designer or Engineer.
Proficiently use AutoCAD Plant3D and/or Solid Edge for 3D modeling, utilizing provided Point Cloud 3D scans for engineering packages.
Create equipment layout, piping layout, general arrangement drawings, piping isometrics, and P&ID drawings.
Conduct fieldwork, including walk downs of current systems, locating tie-ins, and taking measurements.
Document detailed field notes that are easily understandable by others.
Design piping systems based on project scope using P&ID's and specifications, adhering to applicable design standards.
Review project parameters related to piping requirements.
Develop preliminary Bills of Materials for piping design.
Office-based work with occasional short-term field assignments.
Qualifications: Associates degree in mechanical/process design with 3-D modeling.
Preferred minimum of 8 years of experience.
Working knowledge of industry-standard drafting practices, good mechanical aptitude, and general knowledge of Piping Engineering.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
Not Specified
J
Civil Engineer (Water Resources, Modeling, HEC-RAS) - Remote/Hybrid
🏢 Jobot
Salary not disclosed
Experienced Water Resources Engineer needed to join a growing team! This Jobot Job is hosted by: Ryan Anderson Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.
Salary: $120,000
- $150,000 per year A bit about us: APPLY / RESPOND TO LEARN MORE!!! TOP CLIENT SEEKING TOP TALENT!!! MATT DESIDERIO (RECRUITING MANAGER) AT JOBOT />
*MY CLIENT IS OPEN TO A HYBRID/REMOTE SCHEDULE BUT CANDIDATES MUST BE REGIONAL TO LOUISIANA AS THERE WILL BE ON-SITE / IN OFFICE / MEETING REQUIREMENTS
* Why join us? APPLY / RESPOND TO LEARN MORE ABOUT MY CLIENT! TOTAL OFFERINGS INCLUDE BUT NOT LIMITED TO:
*Competitive Salary
*Medical / Dental / Vision
*Bonus Options
*Retirement Planning
*PTO / Holidays
*Top Culture
*Growth Opportunity Job Details HERE ARE SOME DETAILS MY CLIENT IS SEEKING IN THE RIGHT CANDIDATE(s)
*Civil Engineering Experience
*Ideally a PE Certified Civil Engineer
*Project Management
*Water Resources
*Stormwater
*Drainage
*Flood Planning
*Erosion Control
*CFM Please apply / respond to start the process and learn more about the role and my client Matt Desiderio (Recruiting Manager) at Jobot
*real human
* Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
Salary: $120,000
- $150,000 per year A bit about us: APPLY / RESPOND TO LEARN MORE!!! TOP CLIENT SEEKING TOP TALENT!!! MATT DESIDERIO (RECRUITING MANAGER) AT JOBOT />
*MY CLIENT IS OPEN TO A HYBRID/REMOTE SCHEDULE BUT CANDIDATES MUST BE REGIONAL TO LOUISIANA AS THERE WILL BE ON-SITE / IN OFFICE / MEETING REQUIREMENTS
* Why join us? APPLY / RESPOND TO LEARN MORE ABOUT MY CLIENT! TOTAL OFFERINGS INCLUDE BUT NOT LIMITED TO:
*Competitive Salary
*Medical / Dental / Vision
*Bonus Options
*Retirement Planning
*PTO / Holidays
*Top Culture
*Growth Opportunity Job Details HERE ARE SOME DETAILS MY CLIENT IS SEEKING IN THE RIGHT CANDIDATE(s)
*Civil Engineering Experience
*Ideally a PE Certified Civil Engineer
*Project Management
*Water Resources
*Stormwater
*Drainage
*Flood Planning
*Erosion Control
*CFM Please apply / respond to start the process and learn more about the role and my client Matt Desiderio (Recruiting Manager) at Jobot
*real human
* Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Remote working/work at home options are available for this role.
Not Specified
jobs by
✓ All jobs loaded