Jobs in Suffield Hartford County Ct Remote
3,041 positions found — Page 6
- Post Anesthesia Care for a travel nursing job in Hartford, Connecticut.
Job Description & Requirements Specialty: PACU
- Post Anesthesia Care Discipline: RN Start Date: 04/13/2026 Duration: 13 weeks 40 hours per week Shift: 8 hours, days Employment Type: Travel We're looking for Post Anesthesia Care Unit RNs for an immediate travel nurse opening in [citSt].
The right RN should have 1-2 years recent acute care experience.
Read below for more requirements.
As a PACU RN, you'll provide observation and care for post-op patients as they recover from surgical anesthesia.
PACU Travel Nurses offer a crucial care step between surgery and recovery, and ensure that patients are monitored for any adverse reactions.
As a PACU Travel Nurse, you should be prepared to perform the following tasks: Handle a broad range of patients from pediatrics to adults.
Develop individualized care plans based on each patient's condition.
Monitor critical patients for condition changes and report to the physician.
Be responsible for determining when patients are recovered and ready to move to a room.
PACU Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty.
RNs should be able to easily lift 20 pounds.
Moving or lifting of patients may require lifting of up to 50 pounds at times.
Because of the fast-paced environment, Post Anesthesia Care Unit RNs must possess good skills for coping with stress and be able to relate to people of all ages and backgrounds.
Requirements
*: BLS, PALS, 1 Year
* Additional certifications may be required before beginning an assignment.
TotalMed Travel Job ID 1380974.
Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined.
Posted job title: Post-Anesthesia Care Unit
- PACU RN
- Travel Nurse About TNAA TotalMed RN TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare.
The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states.
They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients.
As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience.
TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health.
Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare.
By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients.
Benefits Weekly pay Guaranteed Hours Continuing Education 401k retirement plan Sick pay Wellness and fitness programs Referral bonus Employee assistance programs Medical benefits Dental benefits Vision benefits Benefits start day 15c143e31-5e48-4549-b638-05792d185386
- Operating Room for a travel nursing job in Hartford, Connecticut.
Job Description & Requirements Specialty: OR
- Operating Room Discipline: RN Start Date: 04/05/2026 Duration: 13 weeks 36 hours per week Shift: 12 hours Employment Type: Travel About the Position Specialty: Registered Nurse
- Operating Room (OR) Experience: Minimum 2 years of recent OR experience required License: Active State or Compact RN License Certifications: BLS and ACLS required
- must include expiration dates Must-Have: All time-off requests must be submitted with the initial application Description: We are seeking an experienced OR RN to provide perioperative nursing care, including patient assessment, circulating, and assisting in surgical procedures.
Must be able to scrub and circulate a variety of surgical cases, maintain a sterile environment, and collaborate with surgeons and surgical techs.
This is a 12-hour shift role with possible weekend, holiday, and on-call requirements.
Floating within surgical services may be expected.
Compliance and onboarding take an average of 4-6 weeks .
Requirements Required for Onboarding: Active RN License BLS Prime Staffing Job ID 36184199.
Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined.
Posted job title: RN:Operating Room (OR),07:00:00-19:30:00 About Prime Staffing At Prime Staffing, we understand the importance of finding the perfect fit for both our clients and candidates.
Prime Staffing utilizes a unique matchmaking approach, providing the most qualified contingent staffing to our clients, and the most competitive contracts to our workforce.
Our experienced team takes the time to get to know both our clients and candidates, their needs, and preferences, to ensure that each placement is a success.
We offer a wide range of staffing services including temporary, temp-to-perm, and direct hire placements.
Our extensive network of qualified candidates includes nurses, allied healthcare professionals, corporate support professionals and executives.5c143e31-5e48-4549-b638-05792d185386
- Both Overview Information Systems Technicians, Cryptologic Technician Networks, and Intelligence Specialists keep the Fleet connected, informed, and secure by operating and defending networks, conducting cyber operations, and producing intelligence for decision makers across the Navy.
Key Responsibilities As an Information Systems Technician, design, operate, secure, and restore networks, servers, and communication systems that support naval operations; as a Cryptologic Technician Networks specialist, conduct offensive and defensive cyber operations, investigate and track adversary activity, and help protect Navy networks and critical systems; as an Intelligence Specialist, collect and analyze information on adversaries, environments, and weather and create intelligence products and briefings for commanders.
What to Expect High tempo, mission critical work supporting around the clock operations and watch floors; mix of help desk and user support, network and systems administration, incident response, and planned maintenance; continuous learning in cyber tools, network defense, signals analysis, and intelligence production; strict requirements for handling classified information and complying with security and information assurance standards; shift work, duty rotations, and deployments afloat and ashore.
Work Environment Worldwide assignments ashore at information warfare and intelligence commands and afloat on ships, aircraft, or submarines; work in secure facilities, server rooms, operations centers, and shipboard communications spaces; close teamwork within information warfare and intelligence teams and with supported operational units.
Pathways, Training & Advancement Recruit Training followed by Class A School in an information warfare specialty, such as IT or CTN at information warfare training sites and IS at intelligence training commands; advanced C schools and follow on training in areas such as cyber operations, network defense, digital forensics, signals analysis, targeting, imagery, language, and mission systems; progressive advancement based on qualifications, performance, and warfare pins such as Information Warfare and platform specific warfare designations.
Direct enlistment into IT, CTN, or IS pipelines from civilian life based on aptitude, security clearance eligibility, and Navy needs; in service conversion opportunities for qualified Sailors who meet screening criteria and community requirements; Reserve accession pathways for prior service or qualified civilian professionals when manning needs allow.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: United States citizenship or equivalent status as allowed by law and policy, with most billets requiring citizenship; high school diploma or equivalent; at least 17 years of age; strong interest and aptitude in computers, networks, cyber operations, and analytical work; eligibility for a security clearance at the Secret or Top Secret level depending on the billet.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.5c143e31-5e48-4549-b638-05792d185386
Job Description & Requirements Specialty: Telemetry Discipline: RN Start Date: 04/05/2026 Duration: 13 weeks 36 hours per week Shift: 12 hours, nights Employment Type: Travel Host Healthcare Job ID a1fVX000002yyjJYAQ.
Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined.
Posted job title: RN
- Telemetry About Host Healthcare At Host Healthcare, we provide a truly comfortable experience as you explore your travel nursing, therapy, or allied career.
We make your travel healthcare journey easy by taking care of all the details, so you don't have to.
We are on a mission to help others live better and we do this by helping the healers of the world be as comfortable as possible.
With access to tens of thousands of travel nursing, therapy, and allied jobs in all 50 states, our responsive and friendly recruiters find your dream position based on what's important to you.
During your assignment, get access to premium benefits, including Day 1 medical that continues up to 30 days between assignments, 401K matching, travel reimbursements, dedicated housing support, and more.
We also offer 24/7 support from our team and access to our on-staff clinicians so you can feel comfortable and confident throughout your entire assignment.
Travel comfortably with Host Healthcare.
Benefits Referral bonus School loan reimbursement Vision benefits Wellness and fitness programs Company provided housing options License and certification reimbursement Life insurance Medical benefits Mileage reimbursement Pet insurance Discount program Employee assistance programs Guaranteed Hours Health savings account Holiday Pay 401k retirement plan Continuing Education Dental benefits5c143e31-5e48-4549-b638-05792d185386
Job Description & Requirements Specialty: Telemetry Discipline: RN Start Date: 04/05/2026 Duration: 13 weeks 36 hours per week Shift: 12 hours, nights Employment Type: Travel MedPro Healthcare Staffing , a Joint Commission-certified staffing agency, is seeking a quality Telemetry registered nurse for a travel assignment with one of our top healthcare clients.
Requirements Active RN License Degree from accredited nursing program BLS & ACLS Certifications Eighteen months of recent experience in an Acute Care Telemetry setting Other requirements to be determined by our client facility Benefits Weekly pay and direct deposit Full coverage of all credentialing fees Private housing or housing allowance Group Health insurance for you and your family Company-paid life and disability insurance Travel reimbursement 401(k) matching Unlimited Referral Bonuses up to $1,000 Duties Responsibilities As part of the telemetry unit, Telemetry Nurses (RN) provide care by connecting patients to machines that measure heart rate, blood pressure, breathing rate, as well as blood-oxygen levels and electrocardiogram information.
These machines then send data to computer screens for nurses to monitor.
Telemetry Nurses read and interpret the data to better determine patient care.
Provide care for patients by comfortably connecting them to machines that measure blood pressure, heart rate, breathing rate, blood-oxygen level, and electrocardiogram information.
Monitor and interpret data to assess any potential health problems and needs.
Develop nursing care plans and maintaining accurate medical records.
About Agency MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services.
Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide.
Join us today for your very own MedPro Experience®.
If qualified and interested, please call for immediate consideration.
MedPro Staffing is an Equal Opportunity Employer.
All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status.
Key Words: Telemetry Nurse, RN-Tele, Telemetry Nursing positions, Travel Nurse, Contract Nurse, Agency Nurse, EKG, Tele, Telemetry Contracts, Registered Nurse, Telemetry Nurse, Tele Nurse, RN, Registered Nurse, Telemetry Nurse, RN-Tele, Travel Nursing
*Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses.
Your recruiter will confirm your eligibility and provide additional details.
MedPro Job ID a0Fcx00000HsdiYEAR.
Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined.
Posted job title: Telemetry Registered Nurse Nursing: Telemetry.
About MedPro Healthcare Staffing At MedPro Healthcare Staffing , we believe no one cares more for caregivers than we do.
Our mission is simple: you focus on your patients, and we'll take care of the rest.
As a Joint Commission-certified leader in temporary and contract healthcare staffing since 1983, MedPro has proudly connected nursing and allied travelers with top healthcare facilities across the nation.
With thousands of job opportunities available nationwide, we make it easy to find assignments that align with your goals and lifestyle.
Our on-staff clinical support team—alongside a compassionate group of experienced recruiters—provides hands-on guidance every step of the way.
From Day 1 medical benefits and a 401(k) plan to personalized career support, we're committed to ensuring every professional we serve feels valued, cared for, and empowered to succeed.
Guided by a CEO who is a Registered Nurse, MedPro is built on a foundation of clinical insight and genuine compassion for the caregiving community.
Through The MedPro Experience® , we deliver travel assignments that are rewarding, memorable, and designed to help you DREAM big, EXPLORE often, and ACHIEVE greatness.
Benefits Day 1 medical, dental, and vision benefits for you and your family Weekly pay and direct deposit Unlimited Referral Bonuses starting at $500 On Staff Clinical Support Team Access to nationwide travel assignments MPX Mobile app -24/7 real-time access to jobs, credentials, assignment details, and more Full coverage of all credentialing fees Private housing or housing allowance Tax Free Per Diems, Housing Stipends and Travel Reimbursements Company-paid life and disability insurance Travel reimbursement 401(k) matching Benefits Weekly pay Referral bonus Employee assistance programs5c143e31-5e48-4549-b638-05792d185386
Who We Are
At Loyola Medicine, we are driven by a mission to serve. As part of a nationally recognized, faith‑based healthcare system, we are committed to becoming the most trusted partner in the health of our communities and each person we serve.
Join a team that values compassion, clinical excellence, continuous learning, and collaboration.
Why You’ll Love This Role
- Work with cutting‑edge cardiac and vascular imaging technology in a high‑acuity hybrid OR/Cath Lab
- Join a supportive, experienced team dedicated to exceptional patient care
- Opportunity to train into a specialized cardiovascular role—new Radiologic Technologists encouraged to apply
- Grow your skills in a department known for clinical excellence, teamwork, and continuous learning
What You’ll Do
- Support diagnostic and interventional cardiac and peripheral vascular procedures following sterile technique
- Operate fluoroscopy, C‑arm, PACS, and hemodynamic monitoring systems
- Prepare procedure rooms, position patients, and ensure safe and accurate imaging
- Assist physicians during Cath Lab cases, monitor vital signs, and contribute to optimal procedural flow
- Participate in the on‑call rotation, supporting emergent cases when needed
Schedule
- PRN / Registry
- 7:00am–3:30pm
- Flexibility required for on‑call and occasional extended shifts depending on case volume
What We’re Looking For
Education
- Associate’s degree in Radiologic Technology or equivalent experience/training
Licensure & Certifications
- ARRT certification
- IEMA license (Illinois Emergency Management Agency)
- AHA CPR (BLS)
Skills & Qualifications
- New RT graduates welcome—training provided for the right candidate
- Strong communication and teamwork abilities
- Ability to thrive in a fast‑paced, procedural environment with cardiac/vascular teams
Perks & Benefits:
- Benefits from Day One (Medical and Dental)
- Competitive Shift Differentials
- Career Development
- Tuition Reimbursement
- Participation in the Public Service Loan Forgiveness Program
- 403(b) with Employer Match
- On Site Fitness Center (Gottlieb Memorial Hospital & LUMC)
- Referral Rewards
- Perks Program
Pay Range: $30.99 - $50.71 per hour
Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.
Trinity Health Benefits Summary
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Remote working/work at home options are available for this role.
Position Purpose
The Respiratory Therapist shall be responsible for the administration of respiratory care offered by the Respiratory Care Department
What you will do
Function clinically with a considerable amount of independent judgment regarding the delivery of quality patient care
Serve as a technical resource person to the physicians and other health care workers, with regard to current practices in respiratory care
Set up, operate and manage patient care on respiratory related equipment such as mechanical ventilators, NIPPV/CPAP, or High Flow Oxygen devices
Manage patients on invasive mechanical ventilation modes (AC, PSV, PC, APRV, Bi-level)
Minimum Qualifications
Graduate of an accredited school of Respiratory Care, minimum of a two-year Associate's Degree
Current State of CT Respiratory Care Practitioner License
Registered Respiratory Therapist (RRT) or Certified (CRT) by the National Board of Respiratory Care (NBRC).
Thorough knowledge of the procedures and patient care techniques involved in the delivery of respiratory care
Position Highlights and Benefits
per diem, choose 8hr or 12hr night shifts
excellent shift and weekend differentials
Pay Range: flat rate base: $38.70 CRT $42.25 RRT plus diffs
Ministry/Facility Information
Mercy Medical Center has established itself as one of the leading providers of health care services in Western Massachusetts. Mercy Medical Center is a 182-bed acute care hospital in Springfield. Other facilities include Mercy's Rehabilitation Hospital, a comprehensive hospital-based rehabilitation center on the campus of Mercy Medical Center and Brightside for Families and Children, an outpatient service offering counseling and family support programs
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Wichita, KS (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PI28d909dffe6f-38
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Knoxville, TN (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PIc6dba56b523
Remote working/work at home options are available for this role.
Power Distribution and Make Ready Designer
Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work
Location: Roanoke, VA (Remote)
Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.
ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.
In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.
Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.
WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned
TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready
Requirements:
WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate
PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:
• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
PI80414dffc879-38
Remote working/work at home options are available for this role.
