Engineering Jobs in Stanford, CA

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Radar Hardware Design Engineer, you will be a part of our Radar Engineering team. The Radar Engineering team is comprised of a small cross-functional team of motivated and experienced engineers; we're responsible for designing, building, and testing cutting-edge phased array radar systems from concept to certified product. We enjoy a culture of sharing information and collaboration. Phased array radar systems have historically been reserved for specialized applications, but we're making this technology affordable to enable Detect and Avoid for widespread commercial applications. This role will focus on new advanced operational modes. The passion for revolutionary technology to make aviation safer motivates us to come in every day.

Responsibilities

In your role as a Radar Design Engineer, you will be responsible for designing digital and analog circuits for our next-generation Radar system. You will be involved in all phases of development, from conception to production, tracing system-level requirements through to circuit-level design. You will drive the design and layout of a multi-processor with an FPGA on chip using DDR 4 memory, as well as designing switching and linear power supplies. The high-speed digital design is complemented by high-frequency analog and RF design up to 12GHz. You will own the schematic, layout, artwork generation and bring-up of hardware. You will be collaborating with the cross-functional teams, including mechanical and system engineering. You will be responsible for the certification of your design to DO-160, DO-254 design assurance and FCC certification. You will support radar system integration and testing in the engineering lab and on the aircraft.

Basic Success Criteria

• Electrical Engineering fundamentals, typically gained through a Bachelor's Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or a related discipline

• 5+ years of professional hands-on experience with high-speed digital circuits, linear and switching power regulator circuits, PLL's, VGA, mixers etc.

• Ability to use Circuit simulators, Altium schematic capture and layout, and SPICE simulation software

• Ability to troubleshoot, find root cause, and resolve issues

• Experienced in using oscilloscopes, logic analyzers, spectrum analyzers and Vector Network Analyzers

Preferred Criteria

• Advanced Degree of Science or Electrical Engineering

• Experience developing system architectures and managing requirements for certification of Avionics

• Creative problem solver that can bring multiple disciplines together, with the ability to assess risk and make design and development decisions without all available data

• Experience integrating and troubleshooting various electronic sensors and components

• RF circuit design experience up to 12GHz

• DO-160 and DO-254 hardware design assurance experience

This position will be located at our facility in Mountain View, California.

Must be willing to travel 10% of the time.

The estimated salary range for this position is $190,000 to $250,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $190K - $250K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Manufacturing Engineer (Mechanical) at Reliable Robotics, you'll play a critical role in developing and continuously improving all aspects of our manufacturing, installation, and supply chain processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for designing the build and installation process for mechanical, electromechanical, and/or electrical/avionics products, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.

Responsibilities

• Responsible for building, installing, testing, diagnosing, inspecting, and maintaining Reliable-designed mechanical, electromechanical, and/or electrical/avionics assemblies, harnesses, interconnects, and other commercial-off-the-shelf (COTS) products

• Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements

• Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)

• Develop and ensure compliance with all policies, procedures, quality management system, and engineering change orders

• Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained

• Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability

Basic Success Criteria

• Bachelor's degree in mechanical, electrical, aerospace, or systems engineering

• 7+ years of manufacturing, design, and/or testing experience

• 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

Preferred Criteria

• Research and Development (R&D) or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Previous leadership or management experience

• Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $167K - $230K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Manufacturing Manager at Reliable Robotics, you'll be responsible for manufacturing capacity and throughput, factory development and layout, leading a team of engineers and technicians, and improving our manufacturing processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will have overall accountability for the manufacturing output of a broad portfolio of products, including mechanical, electromechanical, and/or electrical/avionics assemblies. You will also be responsible for leading hiring activities, managing manufacturing layout, equipment maintenance, optimizing manufacturing flow, ensuring tooling and and working with engineering on design for excellence (DFx) improvements. They also handle workforce development, production scheduling, risk mitigation, and performance monitoring to meet production targets. You are responsible for establishing the standards by which this team would operate, and for transitioning the organization from a start-up into a disciplined manufacturing organization. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.

Responsibilities

• Responsible for building, testing, troubleshooting/diagnosing, inspecting, and maintaining Reliable-designed mechanical, electromechanical, and/or electrical/avionics assemblies, harnesses, and interconnects

• Lead, coach, and provide technical mentorship to a team of engineers and technicians; write bi-annual reviews and manage the team's performance

• Lead hiring, recruitment, and training for the technician team

• Lead efforts to transition our products from engineering development to production

• Ensure design for excellence (DFx) is communicated to the engineering and drive implementations across all manufacturing areas to improve cost, producibility, inspectability, consistency, adequacy, accuracy, and achieve conformance to requirements

• Responsible for maturing the manufacturing factory and layout, including optimizing material flow, factory equipment (e.g., tooling, inspection, test, etc.) maintenance, tooling, automation, and business system

• Monitor and communicate manufacturing status and risks, and establish key performance metrics to meet manufacturing targets

• Partner with design, engineering, supply chain, and other departments to synchronize project plans and ensure manufacturing can meet demand

• Develop and ensure compliance with all policies, procedures, quality management systems, and engineering change orders

• Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained

• Ensure root-cause analysis is implemented and timely corrective actions are taken to maintain schedule, quality, and reliability

Basic Success Criteria

• Bachelor's degree in mechanical, electrical, aerospace, or systems engineering

• 5+ years of manufacturing, design, and/or testing experience

• 3+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

• Strong leadership, communication, team-building, and problem-solving skills

Preferred Success Criteria

• Experience with assembly, machining, fabrication, soldering, Electro-Static Discharge (ESD), Foreign Object Debris (FOD), and test methods

• Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment

• Research and Development (R&D) or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Previous leadership or management experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $130K - $195K

A fast-growing robotics company is building autonomous systems designed to automate repetitive tasks within the global infrastructure and construction sector. The company’s mission is to help address workforce shortages while accelerating the development of critical infrastructure projects.

Their robotics platforms combine advanced autonomous navigation, cloud software, and intelligent field tools to improve precision and efficiency across construction environments. With a growing fleet of robots already deployed across multiple project sites globally, the company is developing the next generation of automation tools used in areas such as infrastructure development, surveying, energy projects, and large-scale construction.

The company is seeking a Full-stack Developer to design and maintain the software systems that power its robotics ecosystem — including operator dashboards, cloud infrastructure, and applications that interface with robots operating in the field.

This role will contribute to building reliable tools for mission planning, fleet monitoring, and communication between cloud systems and robotic platforms. The position involves close collaboration with robotics engineers, field operations teams, and product stakeholders to ensure the software delivers measurable impact in real-world environments.

Key Responsibilities

• Design and develop full-stack applications for device management, mission control, and fleet coordination.
• Build and maintain mobile applications used by field operators.
• Develop desktop applications used to interface with robotic systems.
• Create web dashboards and APIs for mission planning, telemetry visualization, and operational data analysis.
• Integrate cloud infrastructure for data storage, monitoring, and deployment.
• Ensure reliable communication between cloud services and deployed robotic systems.
• Collaborate with robotics, product, and field teams to deliver integrated software functionality.
• Write technical documentation for APIs, system architecture, and software modules.
• Optimize systems for scalability, reliability, and performance in field environments.
• Requirements
• Education
• Bachelor’s or Master’s degree in Computer Science, Software Engineering, or a related field.

Experience

• 4+ years of professional full-stack development experience.
• Strong experience with JavaScript / TypeScript using modern frameworks such as React, Next.js, and Node.js.
• Strong UI/UX development experience using modern CSS frameworks.
• Experience building mobile applications using React Native.
• Experience developing cross-platform desktop applications.
• Production experience with cloud platforms such as AWS including APIs, storage, and deployment pipelines.
• Strong understanding of software architecture, testing methodologies, and performance optimization.
• Proficiency with development tools including Git, issue tracking systems, and CI/CD pipelines.

Soft Skills

• Strong analytical and problem-solving ability.
• Ability to collaborate effectively in a fast-paced engineering environment.
• Strong ownership mindset and communication skills.
• Preferred Qualifications
• Experience working with robotics systems or robotics middleware.
• Familiarity with real-time communication protocols such as WebSockets or MQTT.
• Experience working with IoT devices, connected hardware, or industrial systems.
• Experience working with performance-sensitive or multi-threaded applications.
• Experience with containerization technologies such as Docker or Kubernetes.

About the Company

Atomus’ mission is to provide world-class cybersecurity for the world’s most critical organizations. We build security compliance software delivered as managed services sold directly, with relevant professional services and support. Our commercial customers include hypersonic aircraft companies, satellite and space mission systems companies, AI and software companies, among many others serving primarily the aerospace and defense industry. At Atomus we are hardworking, we move fast, and we put our customers first.

About the Role

As a Business Operations Intern, you’ll play a key role in keeping our fast-moving team running smoothly—from coordinating product shipments and managing our Shopify store to planning team events and supporting the cofounders on strategic projects. We’re looking for someone who moves quickly, leans on AI tools to work smarter, and has a sharp eye for design and detail. This is a hands-on role where you’ll gain real experience across every facet of a growing cybersecurity startup.

Responsibilities

• Coordinate and manage physical shipments of security products to customers, including tracking orders, preparing packages, and communicating delivery timelines
• Help manage and maintain the company’s Shopify store, including inventory tracking, product listings, and order fulfillment
• Plan and coordinate team events and travel logistics
• Support the cofounders on a variety of strategic and operational projects as priorities evolve
• Manage office supply and snack ordering to keep the team well-stocked and happy
• Leverage AI tools and agents (e.g., Claude, ChatGPT, automation platforms) to streamline workflows and increase efficiency across tasks

Qualifications

• Currently enrolled in a Bachelor’s or Associate’s degree program at a Bay Area college or university, ideally pursuing a technical degree (e.g., Computer Science, Engineering, Information Systems, Business Analytics)
• Demonstrated proficiency with AI tools and a strong preference for using AI agents (e.g., Claude, Lovable) to get work done faster
• A good eye for design—whether it’s formatting a document, laying out a slide deck, or organizing a storefront
• Strong organizational skills and attention to detail
• Excellent written and verbal communication skills
• Comfortable managing logistics and coordinating shipments or deliveries
• Thrives in a fast-paced environment and can juggle multiple priorities with minimal direction
• Reliable, self-motivated, and able to work independently
• Ability to work in-office in downtown San Francisco 10–20 hours per week

Preferred Skills

• Interest in cybersecurity, technology, or the startup ecosystem
• Experience with Lovable or similar AI-powered app building tools
• Experience with Shopify or other e-commerce platforms
• Experience coordinating events, travel, or conference logistics
• Previous experience with shipping, logistics, or inventory management
• Familiarity with project management tools (e.g., Asana, Trello, Notion)
• Familiarity with design tools (e.g., Canva, Figma) for light creative tasks
• Previous internship or work experience in an office or operations role

Pay range and compensation package

Competitive hourly pay. Flexible scheduling around your class schedule (10–20 hours/week). Mentorship and hands-on exposure to multiple areas of a growing cybersecurity company. A collaborative, supportive team culture in a downtown San Francisco office.

Job Title: Test Lead

Location: Mountain View, CA

Job Type: Full-Time

Job Description:

Qualification: B. Tech/MTech (Electronics & Communication Engineering)

1) Min 10 yrs experience in Automotive test development and testing with min 2 yrs in the infotainment and/or telematics domain

2) Test automation and testing of IVI interfaces at least 2 of the following: Serialize-based high-resolution Displays, Ethernet, Tuner, Wi-Fi, BT, V2X, LTE, GNSS, and Audio.

3) DVP&R preparation, DV testing

Skills:

1) Min 10 yrs experience in Automotive test development and testing with min 2 yrs in the infotainment and/or telematics domain

2) Test automation and testing of IVI interfaces of at least 2 of the following: serialize-based high resolution Displays, Ethernet, Tuner, Wi-Fi, BT, V2X, LTE, GNSS, and audio

3) DVP&R preparation, DV testing

Job Description:

We are looking for a Mechanical Engineer with experience in designing liquid cooling systems for battery packs or data centers. The candidate should be able to work with SolidWorks or CATIA to create 3D models and drawings.

Responsibilities:

• Design liquid cooling components such as cold plates, manifolds, hoses, and enclosures
• Create 3D models and 2D drawings in SolidWorks or CATIA
• Work with the thermal and electrical teams to improve cooling performance
• Support prototype builds and testing
• Communicate with suppliers and support production readiness

Requirements:

• Degree in Mechanical Engineering
• Experience in liquid cooling design (battery cooling or data center cooling preferred)
• Hands-on experience with SolidWorks or CATIA
• Basic knowledge of heat transfer and fluid flow
• Good communication and teamwork skills

Summary:

The main function of a CAE Engineer is to perform engineering analysis using computer-aided engineering tools to optimize product designs and manufacturing processes. This role involves collaborating with various engineering teams to ensure that products meet performance, durability, and safety standards.

Job Responsibilities:

Develop and analyze FEA models to evaluate the structural integrity and performance of components.

Optimize engine components, including cylinder head ports, combustion chambers, and cooling circuits.

Collaborate with design engineers to improve product designs and implement engineering changes.

Prepare detailed reports and present analysis results to project teams and senior management.

Use CAE tools to enhance manufacturing processes and reduce development time.

Ensure that designs comply with relevant safety and quality standards.

Skills:

Creativity, verbal and written communication skills and problem-solving ability.

Basic ability to utilize various forms of media, including print, electronic and film.

Basic knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings and models. Previous experience in CAE analysis, preferably in the automotive or aerospace industry.

Proficiency in CAE software (e.g., Abaqus, Hyper mesh).

Education/Experience:

Bachelor’s or Master’s degree in Mechanical Engineering, Aerospace Engineering, or a related field.

5-7 years experience required.

Job Title: Plastic Tooling Engineer

Location: Newark, CA

Employment Type: Full-Time

Job Overview

We are seeking an experienced plastic tooling engineer to support the development of high-quality automotive components. In this role, you will contribute to a world-class vehicle engineering team by providing expertise in plastic tooling and injection molding processes. You will work closely with design engineers and suppliers to ensure tooling feasibility, manufacturability, and cost efficiency from the Design for Manufacturing (DFM) phase through product launch.

Key Responsibilities

• Support vehicle engineering teams with plastic tooling and polymer expertise throughout product development.
• Collaborate with design engineers and suppliers to evaluate tooling feasibility, DFM, efficiency, and cost optimization.
• Review and approve mold concepts, mold designs, and flow simulation studies before tool kick-off.
• Ensure all tooling designs comply with company tooling standards and maintain detailed documentation of the review and approval process.
• Provide guidance on injection molding processes and tooling technologies to ensure product quality and manufacturing robustness.
• Conduct on-site supplier visits and tooling audits to assess tool quality and condition.
• Lead injection molding process optimization and tool validation activities.
• Support cross-functional teams and represent the tooling team in communications with suppliers and internal stakeholders.
• Participate in tool cost estimation, change cost evaluation, and process improvement initiatives.

Required Qualifications

• Bachelor’s degree in Engineering or a related field.
• 5+ years of experience in plastic injection molding and tooling design evaluation.
• Strong experience reviewing DFM for injection molded parts, including automotive Class-A surface components.
• Deep knowledge of injection molding tooling technologies such as:
• In-mold decoration (IMD) / in-mold labeling (IML)
• Overmolding
• Back-injection
• Foaming processes
• Vario-thermal processes
• Experience reviewing flow simulation results using tools such as Autodesk MoldFlow or similar software.
• Hands-on experience with plastic injection molding process setup and optimization.
• Experience with tooling cost estimation and tooling change evaluation.
• Strong documentation, analytical, and communication skills.
• Ability to travel domestically and internationally up to 25%.

Preferred Qualifications

• Experience working in an automotive product development environment from concept to launch.
• Hands-on experience performing MoldFlow simulations, first tool trials, and tooling approvals.
• Experience with tool should-costing analysis and cost impact evaluation for design decisions.

The Role:

· Be a significant contributor to a world-class vehicle engineering team by supporting with plastics tool expertise and owning polymer-related aspects from part design for manufacturing (DFM) phase to product launch.

· Consultation with design engineers and suppliers throughout product development process, advising on process and tooling feasibility, DFM, efficiency and cost. The role ensures capability, robustness and cost-effectiveness of tool with sign-off.

· Evaluation of flow studies, mold concepts, and mold designs before tool approval and kick-off.

· Ensuring plastic tooling is compliant with Lucid Tool Standards, and documentation of review process.

· Support of internal non-engineering teams and representation of Lucid Tooling Team in communication with suppliers (incl. on-site visits).

· Leading on-site assessment of tool quality/condition, and driving injection molding process optimization.

Qualifications:

· B.S. in Engineering

· 5+ years’ experience, evaluating DFM and injection molding tool designs, including sign-off responsibility

· Excellent knowledge of injection tooling, including technologies such as in-mold decoration/labeling, foaming, overmolding, back-injection, vario-thermal processes

· Experience with DFM process for automotive A-surface parts

· Experience with flow simulation software (e.g. Autodesk MoldFlow), and ability to critically review simulation results

· Proven hands-on experience with plastic injection molding process, including process optimization

· Experience in tooling cost and tool change cost estimation

· Methodical approach to documentation

· Exemplary verbal and written communication skills

· Able to travel domestically and internationally up to 25% if needed

Advantageous:

· Worked in automotive development environment, ideally through complete product development process

· Hands-on experience with creation of MoldFlow studies, first tool trials, and tool approvals

· Experience with tool should costing to understand tool cost impact of part design choices

· Experience with other plastic manufacturing processes and their tooling (e.g. blow molding, thermal forming, vacuum forming, compression molding, slush molding)

· Experience auditing tool shops