Jobs in Sparta Kent County Mi Remote

NOTE: This position must be performed in Washington, DC so relocation to Washington, DC will be required.

Recruitment Incentive: Applicants may be eligible for a $75,000 recruitment incentive in accordance with regulatory requirements. Click apply to view full details and eligibility of this recruitment incentive.

At their core, those who join the Secret Service are courageous, intelligent, strong and determined. A diverse team capable of balancing our investigative mission and fulfilling our protective legacy. Proven to be worthy of trust and confidence. Be tomorrow's Secret Service.

Duties

During the course of their careers, Secret Service Police carry out assignments in protection. Duties include:

• Providing protection for The White House Complex, The Vice President's Residence, The Main Treasury Building and Annex, and foreign diplomatic missions and embassies in the Washington, D.C. area.
• Traveling in support of the Presidential, Vice Presidential, and foreign heads of state/government missions.
• Enforcing mandated protective responsibilities as described under Title 18, United States Code, Section 3056A.

Requirements

• U.S. citizenship is required.
• Possess a current valid U.S. driver's license.
• Must be at least 21 years old at the time of application and under 40 at referral. Exceptions may apply for those with current or prior service in federal law enforcement positions covered by special retirement provisions. The Secret Service has determined that age is essential to the performance of this position.
• Carry and use a firearm. Maintaining firearm proficiency is also mandatory.
• Possess uncorrected visual acuity of no worse than 20/100 binocular. Possess corrected visual acuity of 20/20 or better in each eye.
• Hearing loss, as measured by an audiometer, must not exceed 25 decibels (A.S.A. or equivalent I.S.O.) in either ear in the 500, 1000, and 2000 Hz ranges. Applicants must be able to hear the whispered voice at 15 feet with each ear without the use of a hearing aid.
• Submit to a drug test prior to your appointment and random drug testing while you occupy the position.
• Complete 12 weeks of intensive training at the Federal Law Enforcement Training Center (FLETC) in Glynco, GA or Artesia, NM and 17 weeks of specialized training at the James J. Rowley Training Center in Laurel, MD.
• Certify that you have registered with the Selective Service System or are exempt from having to do so, if you are a male applicant born after December 31, 1959.

**Job Description
**: The Material Handler at FedEx is responsible for the efficient movement and storage of materials within the warehouse.

This includes loading and unloading materials, operating machinery, and ensuring that inventory is properly managed and stored.

You will be responsible for tracking inventory, maintaining accurate records, and ensuring that materials are readily available for shipping and production processes.

The ideal candidate will have experience in warehouse operations, strong attention to detail, and the ability to work independently or as part of a team.

Drive for BFS, the #1 name in the industry and America's largest supplier of building materials, value-added components and building services to the professional market. At Builders FirstSource, we value our drivers and will support you at every turn through continued learning and training, the right equipment, tools, technology, and an overriding commitment to safety and career growth.

Responsible for driving delivery vehicles and/or operating truck-trailer combinations to transport and deliver materials to customer sites. Adheres to driver safety/compliance regulations, delivers un-damaged goods on schedule, and provides professional service to customers. Drives vehicle weighing greater than 26,000 pounds and may tow vehicles or trailers greater than 10,000 pounds.

• May load or assist with loading and appropriately securing product, materials, or supplies inside delivery vehicle.
• Delivers customer orders to specified delivery site. Maneuvers vehicles into loading or unloading positions and ensures that vehicle and loading equipment are properly positioned. Assists customers with unloading materials safely and accurately. Takes all precautions to protect the product and the customer's property.
• Verifies order details and maintains logs of delivery duties including amounts and/or weights of items, mileage and locations of deliveries. Checks items against invoice to ensure order accuracy.
• Acts as a customer service liaison between the company and the site customer. Handles customer concerns and helps resolve issues as they arise.
• Maintains the cleanliness and appearance of delivery vehicles; performs routine safety checks to ensure vehicles comply with company guidelines.
• Required to use hand held devices, except for while driving, to ensure compliance with DVIR and HOS.
• Maintain hours of service logs and pre/post trip inspection procedures.
• May perform credit/product return pick-ups and related paperwork.
• Operate a Forklift or non-motorized material handling equipment to load and off load materials to designated areas.
• Understands and observes all safety procedures and practices in order to prevent injury to self or co-workers; attends periodic safety meetings as required; may recommend changes to improve safety procedures.
• Other duties as assigned.

This job has no supervisory responsibilities.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

• High School Diploma or GED, 21+ years old, valid driver's license and a class A CDL license. A minimum of 1 year of delivery driving experience. 2 years of CDL driving experience strongly preferred.
• Valid driver's license
• Class A CDL license
• Pass MVR report
• Obtain a DOT medical card within five (5) days of a request
• Have less than 5 moving violations in the last 5 years
• Basic math & measurement skills
• Ability to read and speak the English language

Relationship Building: Builds working relationships and seeks to resolve issues constructively.

Teamwork: Knows and supports teammates' work and deliverables. Encourages team unity through sharing information or expertise.

Customer Focus: Listens to, anticipates and responds to customer needs.

Conflict Resolution: Manages difficult situations professionally and partners with others to achieve mutually beneficial results.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Work is performed within a production environment, subject to temperature variations, hazardous chemicals, mechanical parts, increased noise levels and dust.
• Must be able to lift and carry up to 100 pounds frequently and on occasion may be required to lift and carry, with assistance, up to 200 pounds.
• May be required to perform specific tasks that involve climbing, lifting, pushing or kneeling.
• Must be able to physically operate delivery vehicles (climb up and down into cab, twist torso for 360 degree visibility, use arms to operate controls, etc.).

As a BFS driver, you're there for our customers, so we're there for you. Providing everything from a terrific team environment, performance-driven work culture to competitive pay and great perks and benefits. Join us to be more, do more, and build more, together at BFS.

Builders FirstSource is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status or status as an individual with a disability.

In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Builders FirstSource, please call (214) 765-3990 or email . Please do not send resumes to this email address - it is intended only to be used to request an accommodation in submitting an application for a job opening.

Who We Are

At Loyola Medicine, we are driven by a mission to serve. As part of a nationally recognized, faith‑based healthcare system, we are committed to becoming the most trusted partner in the health of our communities and each person we serve.

Join a team that values compassion, clinical excellence, continuous learning, and collaboration.

Why You’ll Love This Role

• Work with cutting‑edge cardiac and vascular imaging technology in a high‑acuity hybrid OR/Cath Lab
• Join a supportive, experienced team dedicated to exceptional patient care
• Opportunity to train into a specialized cardiovascular role—new Radiologic Technologists encouraged to apply
• Grow your skills in a department known for clinical excellence, teamwork, and continuous learning

What You’ll Do

• Support diagnostic and interventional cardiac and peripheral vascular procedures following sterile technique
• Operate fluoroscopy, C‑arm, PACS, and hemodynamic monitoring systems
• Prepare procedure rooms, position patients, and ensure safe and accurate imaging
• Assist physicians during Cath Lab cases, monitor vital signs, and contribute to optimal procedural flow
• Participate in the on‑call rotation, supporting emergent cases when needed

Schedule

• PRN / Registry
• 7:00am–3:30pm
• Flexibility required for on‑call and occasional extended shifts depending on case volume

What We’re Looking For

Education

• Associate’s degree in Radiologic Technology or equivalent experience/training

Licensure & Certifications

• ARRT certification
• IEMA license (Illinois Emergency Management Agency)
• AHA CPR (BLS)

Skills & Qualifications

• New RT graduates welcome—training provided for the right candidate
• Strong communication and teamwork abilities
• Ability to thrive in a fast‑paced, procedural environment with cardiac/vascular teams

Perks & Benefits:

• Benefits from Day One (Medical and Dental)
• Competitive Shift Differentials 
• Career Development
• Tuition Reimbursement
• Participation in the Public Service Loan Forgiveness Program
• 403(b) with Employer Match
• On Site Fitness Center (Gottlieb Memorial Hospital & LUMC)
• Referral Rewards
• Perks Program

Pay Range: $30.99 - $50.71 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Position Purpose

The Respiratory Therapist shall be responsible for the administration of respiratory care offered by the Respiratory Care Department

What you will do

• ​Function clinically with a considerable amount of independent judgment regarding the delivery of quality patient care

• Serve as a technical resource person to the physicians and other health care workers, with regard to current practices in respiratory care

• Set up, operate and manage patient care on respiratory related equipment such as mechanical ventilators, NIPPV/CPAP, or High Flow Oxygen devices

• Manage patients on invasive mechanical ventilation modes (AC, PSV, PC, APRV, Bi-level)

Minimum Qualifications

• Graduate of an accredited school of Respiratory Care, minimum of a two-year Associate's Degree

• Current State of CT Respiratory Care Practitioner License

• Registered Respiratory Therapist (RRT) or Certified (CRT) by the National Board of Respiratory Care (NBRC). 

• Thorough knowledge of the procedures and patient care techniques involved in the delivery of respiratory care

Position Highlights and Benefits

• per diem, choose 8hr or 12hr night shifts

• excellent shift and weekend differentials

Pay Range: flat rate base: $38.70 CRT $42.25 RRT plus diffs

Ministry/Facility Information

Mercy Medical Center has established itself as one of the leading providers of health care services in Western Massachusetts. Mercy Medical Center is a 182-bed acute care hospital in Springfield. Other facilities include Mercy's Rehabilitation Hospital, a comprehensive hospital-based rehabilitation center on the campus of Mercy Medical Center and Brightside for Families and Children, an outpatient service offering counseling and family support programs

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

What to expect as a Nursing Supervisor at Saint Mary's Home  

Under the direction of the Director of Nursing Service, the Nursing Supervisor is responsible for the overall coordination and delivery of resident care and clinical supervision of staff on an assigned shift. The Nursing Supervisor is empowered and accountable for taking all reasonable steps to ensure that all staff promote and deliver a level of care that meets or exceeds our residents’ expectation. The Nursing Supervisor will assure that all assigned staff are active participants in the interdisciplinary care team designed to maximize each resident’s potential for independence and autonomy. Functions as the administrative representative designee in the absence of administration in the building. 

REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: 

1. Education - Graduate of an accredited school of nursing. 

2. Current licensure as a Registered Nurse in the State of Connecticut. 

3. Three years in Clinical practice, with one year in long-term care required. 

4. Acute care and supervisory experience preferred. 

5. Excellent communication and assessment skills required. 

6. Working knowledge of OBRA, State and JCAHO regulatory requirements. 

7. Computer literacy strongly preferred. 

8. CPR certification. 

9. Must be able to safely perform the essential job functions with or without reasonable Accommodation. 

What We Offer 

• DailyPay – Access your earnings when you need them 

• Generous PTO for full-time and part-time colleagues 

• Up to $4,000 in annual tuition reimbursement 

• Competitive compensation and shift differentials 

• Employee Assistance Program (EAP) including: 

• Financial wellness: saving, budgeting, and investing guidance 

• Mental health: counseling and stress management tools 

• Work-life support: legal, educational, and lifestyle resources 

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Wichita, KS (Remote)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22

PI28d909dffe6f-38

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Knoxville, TN (Remote)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22

PIc6dba56b523