Jobs in Somerset

At Arbon Equipment, a Rite-Hite Company, your work makes an impact. We deliver industry-leading solutions that keep workplaces safe, productive, and efficient. When you join Arbon Equipment, you're not just selling or servicing equipment - you're building trusted partnerships with customers and growing your career with a company backed by the strength of Rite-Hite's global innovation.

Being an Installation Technician holds a sense of integrity and independence. You are the face of the organization with our customers as you install a variety of Rite-Hite products, functioning out of our North Brunswick, NJ office to service the surroundings areas from a service truck which you can house at your residence. The opportunity offers a career for you to grow your skillset and make a daily impact!

ESSENTIAL DUTIES AND RESPONSIBILITIES

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

• Timely and proper inspection, repair, maintenance, and installation of customer equipment in a manner that exceeds customer expectations and that is consistent with Rite-Hite's image as the industry leader in customer service.

• Develop and maintain good customer relations in a manner that exemplifies Rite-Hite's image and commitment to customer service.

• Compliance with all company policies and safety guidelines.

• Perform installation, inspection, and repair of equipment in the field in an expeditious manner while assuring the customer's needs are met and exceeded. This is mainly accomplished individually but may sometimes be accomplished in small teams.

• As skills and knowledge develop, guide other Technicians with less skills/knowledge through complex problems in the field. This may include training other Service Technicians in the proper field installation, service and repair of equipment and proper administrative procedures instilling Rite-Hite's commitment to customer service.

• Using the handheld devices (or paper backup forms if needed) accurately complete all necessary paperwork associated with field service, repair, and installation, including service tickets, timesheets, open job tracking form and safety analysis sheets.

• Maintain compliance with operation and communication standards as per the Field Technician Handbook.

• This position requires the operation of a service vehicle in compliance with DOT Driver Qualification standards, as well as truck-based cranes, forklifts, welders, torches, and power and hand tools.

• Follow all customer-specific requirements, policies, safety guidelines and directions on their work sites.

• Work closely with all other departments in the company, communicating and coordinating activities to efficiently maximize customer satisfaction.

• Occasional (under 20% annually) domestic overnight travel may be required for training, supporting customers at other offices, etc. may be required.

• Other duties may be assigned.

EDUCATION and/or EXPERIENCE

The successful individual will possess:

• High school diploma or general education degree (GED); and

• One to five year's experience in repair and service of hydraulic, mechanical, and electrical equipment

KNOWLEDGE / SKILL REQUIREMENTS

The ideal individual will demonstrate:

• Service Technicians must have a valid drivers license

• Passing DOT medical exam

• Applicable driver qualification standards at all times.

• Ability to read and interpret documents such as safety rules, blueprints & schematics, operating and maintenance instructions, and procedure manuals.

• Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

• Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

• Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

SUPERVISORY RESPONSIBILITIES:

This role will not have supervisory responsibilities.

What We Offer

At Arbon Equipment - A Rite-Hite Company, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work:

• Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more.

• Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing.

• Time for You: Paid holidays, vacation time, and personal/sick days each year.

Join us and build a career where you're supported - at work and beyond.

Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans.We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.

Who we are:

Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together - a future focused on serving the customer and powering and protecting the world.

With a global network of manufacturing and distribution facilities worldwide, Atkore is a leading provider of electrical, safety and infrastructure solutions.

Who we are looking for:

We are currently looking for a BIM Technician to be based out of Tampa, FL reporting to the Drafting Manager. This person will be responsible for working with the project team to develop accurate and complete modeling drawing sets. The BIM Technician will ensure the integrity of project drawings while maintaining privileged information per the customer and company requirements.

What you'll do:

• 
  
• Accurately identify product specifications and understand of detail assemblies and their application for installation.
  
• Create or revise/update construction drawings, maintaining a tracking log of drawings.
  
• Review drawings for accuracy and scope of work, ensuring quality of final drawings.
  
• Collaborate with team and customers to ensure that projects are successfully completed, and best practices/technical issues are addressed.
  
• Run the multi trade coordination for clashes to assist project team with the design process.
  
• Conduct clash detection and visual walkthroughs using Navisworks Manage.
  
• Research ways to continuously improve our process including providing insight into new time saving methodologies and best practices.
  
• Manage, maintain, and update BIM Project documents.
  

What you'll bring:

• 
  
• Bachelor's (preferred) or Associates Degree in Architecture, Engineering, and Construction (AEC) related field with 1 to 3 years of industry experience.
  
• 1+ years' experience in 3D Revit or 3D AutoCAD.
  
• Technical certificates in Drafting and ED BIM Modeling training (preferred).
  
• Experience with Autodesk Revit, CAD, and BIM procedures (Preferred).
  
• Familiarity with Overhead coordination process including 3D Modeling utilizing Revit in project environment, Project As-builts and turnover for Facility management.
  
• Experience with Microsoft Office Suite, CAD and BIM systems including Autodesk AutoCAD, Revit Suite, BIM 360, Veo, Bluebeam, Word, Excel, and PowerPoint.
  

Within 3 months, you'll:

• 
  
• Complete the onboarding material and training on companies' products and drafting processes.
  
• Collecting information from multiple plans and incorporating them into a model which can be used to build structural support.
  
• Produce 2D shop drawings and 3D models projects with assistance of PM and BIM Designer.
  
• Complete Atkore Immersion process.
  

Within 6 months, you'll:

• 
  
• Communicate effectively with PM's and other team members in order to gather the information needed for each project.
  
• Develop strong knowledge of the companies' products and produce accurate designs based on each project needs.
  
• Assist with BIM Designer to coordination meeting and be part of BIM project development at different phases: modeling, cleaning clashes and producing shop drawings.
  

Within 12 months, you'll:

• 
  
• Produce structural models and drawings using Revit and manage coordination projects.
  
• Manipulate and develop CAD library components for AutoCAD and Revit or other related software.
  
• Independently handle BIM project from start to finish by assisting to BIM Coordination, performing clash detection, and resolving coordination issues.
  

Atkore is a recipient of a Great Place to Work certification and a Top Workplaces USA award! We're committed to creating an engaged and aligned workforce that drives collaborative culture. Our team strives for breakthrough results, stays focused on being standout leaders, and fully supports decisions of the Company. We consistently live the Atkore mission, strategic priorities, and behaviors, all in a way that's consistent with our core values. Together, we build strong leaders that continually endeavor to move us forward.

With a global network of manufacturing and distribution facilities worldwide, Atkore is a leading provider of electrical, safety and infrastructure solutions.

Join our team and align yourself with an industry leader!

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Our client, a well-regarded regional defense litigation firm is seeking a General Liability Associate to join their Philadelphia area team.

The ideal candidate will have 4 to 7 years of general liability defense experience (auto, premises liability, etc.). This is a partnership track position.

During training, this position is hybrid remote (2 days on site per week). After training, there is potential for the position to be primarily or fully remote.

Candidates should be admitted to practice in NJ. PA admission is preferred but not required.

Competitive base salary 120k to 150k, bonus, matching 401k and benefits.

Our client, a large international firm, is seeking a mid-senior level associate attorney for their busy litigation practice in their Silicon Valley office. The practice focuses on representing international clients in U.S. courts, and the work includes cross-border white collar investigations and defense, as well as international commercial litigation spanning class actions, asset recovery, and contract disputes.

The ideal candidate would have:

• 6-8 years of substantial litigation experience;
• Experience managing complex U.S. cases and supervising junior attorneys;
• Preference for candidates with white collar, international commercial, or technology-related litigation experience;
• JD from a T-20 law school or top 25% of a T-50 law school;
• Admitted to the California State Bar

If you are interested in learning more about this position, please submit your resume in confidence and one of our dedicated associate recruiters will be in contact if you meet our qualifications. We will not disclose your identity or share your resume with our client until we have your express permission.

Prominent national law firm is expanding and seeking a Litigation Attorney to join their growing Red Bank, New Jersey office. Option to work fully remote or hybrid.

Ideal candidate will have 3-10+ years of experience in ANY of these practice areas: General Liability, Construction Defect, NY Labor Law, Transportation, Coverage, Premises Liability, Catastrophic Personal Injury, Habitability, Tort, Professional Liability, Municipal, Medical Malpractice, Auto, Product Liability, Civil Litigation.

Responsibilities:

• Manage assigned cases

• Handle cases from inception to conclusion

• Take and defend depositions

• Make court appearances

• Draft motions, pleadings and respond to discovery

Qualifications:

• 3-10+ years of litigation experience

• Licensed to practice and in good standing in NY.

• Trial and or trial prep experience

Base salary up to 210k + Bonuses + Comprehensive Benefits Package+ Fully Remote or Hybrid

Please email resume to

A well-established and growing law firm in Edison, NJ is seeking a Commercial Litigation Attorney with 5+ years of experience to join its litigation team. This is an excellent opportunity for an attorney who wants hands-on responsibility, client interaction, and long-term growth within a collaborative firm environment.

Responsibilities:

• Handle a broad range of commercial litigation matters from inception through resolution
• Draft and argue motions, pleadings, and dispositive briefs
• Manage all phases of discovery, including depositions and written discovery
• Appear in state and federal courts throughout New Jersey
• Work directly with clients and provide strategic litigation counsel
• Collaborate with partners and junior attorneys on complex matters

Qualifications:

• 2+ years of commercial litigation experience
• Active New Jersey Bar admission (NY admission a plus)
• Strong experience handling cases independently
• Excellent legal research, writing, and analytical skills
• Prior experience in state and federal court required
• Strong communication skills and a client-focused mindset

Compensation & Benefits:

• Competitive base salary commensurate with experience
• Performance-based bonus opportunities
• Comprehensive benefits package
• Collegial work environment with opportunity for advancement
• The annual salary for this position is between $120,000 – $180,000. Factors which may affect pay within this range may include geography/market, skills, education, experience and other qualifications of the successful candidate.

Pay: $175K+ annually ($150K-$175K base + up to 20% performance bonus), and full benefits.

Location: Onsite 5 days (7a-4p) a week in Northern NJ

Client: Exceptionally successful national manufacturing brand

This is a confidential search for a hands-on Plant Manager to lead operations at:

A custom metal fabrication facility serving large-volume clients (very unique job shop with custom projects).

This facility specializes in sheet metal, tubing, and wire component fabrication, with capabilities including laser cutting, NC punching, brake forming, roll forming, TIG/MIG welding, spot welding, grinding, and in-house powder coating.

Job Summary

We are seeking a strategic, operationally strong manufacturing leader with deep experience in metal fabrication and a strong commitment to safety, quality, and continuous improvement. This role requires an accountable and results-driven professional who can lead teams, manage plant budgets, and drive operational efficiency in a fast-paced production environment.

The ideal candidate thrives on problem-solving, builds high-performing teams, and delivers operational excellence.

What You Will Do

• Direct and oversee daily plant operations including production, maintenance, quality control, inventory, and shipping/receiving
• Develop and implement strategies to improve productivity, reduce waste, optimize costs, and ensure on-time delivery
• Establish and monitor KPIs (scrap rates, downtime, safety metrics, throughput, etc.) and implement corrective actions
• Develop and manage plant budgets and capital expenditures
• Ensure compliance with federal, state, and local regulations including OSHA and workplace standards
• Drive Lean Manufacturing and continuous improvement initiatives
• Oversee preventive maintenance programs to ensure equipment reliability
• Lead, mentor, and develop management staff and production personnel
• Partner cross-functionally with Sales, Engineering, and Supply Chain to align plant performance with business goals
• Manage vendor and contractor relationships

What It Takes to Succeed

• Bachelor’s degree in Engineering, Manufacturing, Business, or related field (or equivalent experience)
• 7–10+ years of progressive leadership experience in manufacturing
• Strong experience in metal fabrication operations (machining, welding, forming, stamping, finishing)
• Demonstrated leadership and team development capability
• Knowledge of workplace safety and regulatory compliance

Preferred Experience

• Lean / Six Sigma certification
• ERP / MRP systems experience
• Experience in union environments (if applicable)

Work Environment

Manufacturing facility environment requiring regular presence on the production floor and adherence to PPE and safety standards.

General Manager — Residential & Commercial HVAC/Plumbing Services

Location: On-site in Northern New Jersey (convenient to Passaic, Morris, Essex & Sussex Counties)

Compensation: $175K base + substantial performance-based bonus + full benefits

Overview

A privately held, multi-division HVAC and plumbing services company is seeking a hands-on, results-oriented operational leader to oversee business performance, workforce management, and process improvement. The company provides installation, repair, and maintenance services for both residential and commercial customers. This role leads a 25+ person team—including technicians, field supervisors, customer service, and sales—and supports dozens of active service calls and projects at any given time.

Role Summary

The General Manager will take operational ownership of a fast-growing service organization known for responsiveness, technical expertise, and high-quality workmanship. You will align people, systems, financial goals, and customer service expectations to drive growth, operational efficiency, and long-term profitability.

Key Responsibilities

• Lead budgeting, forecasting, and financial performance with a focus on revenue, margins & net income
• Oversee fleet, tools, inventory, and HVAC/plumbing equipment acquisition, utilization, and maintenance
• Manage and develop service managers, dispatch, customer service, install crews, and plumbing/HVAC division leads
• Strengthen lead generation, scheduling, estimating, proposal workflows, and project intake processes
• Utilize software, automation tools, CRM/field service platforms, and AI to improve efficiency and proposal turnaround time
• Define and track KPIs across operations—technician productivity, close rates, callbacks, customer satisfaction, job profitability, etc.
• Maintain smooth communication between the office, warehouse, service technicians, and install teams
• Support expansion into new service offerings, territories, verticals, or maintenance contract programs—including recruiting and process design
• Partner closely with the CEO to execute strategic initiatives and long-term vision
• Ensure compliance with safety standards, licensing requirements, manufacturer guidelines, and industry best practices

Ideal Background

• 10+ years of operational leadership in HVAC, plumbing, mechanical contracting, or related trades
• Experience serving both residential customers and commercial/industrial accounts
• Proven success managing field technicians, office staff, and multiple revenue-generating divisions
• Strong people leadership—coaching, motivating, developing, and retaining teams
• Familiarity with estimating, service agreements, maintenance contracts, permitting, and bid responses
• Systems-oriented mindset—comfortable building processes, enforcing accountability, and scaling operations
• Experience using dispatching, scheduling, CRM, or workflow management platforms; interest in automation tools and AI
• Strong recruiting instincts and industry network to identify and hire top technicians and managers

Who Will Thrive in This Role

• Hands-on leaders who enjoy spending time in the field, visiting job sites, and understanding operations firsthand
• Problem-solvers who build, refine, and optimize systems—not just maintain the status quo
• Motivators who inspire performance, trust, communication, and teamwork without micromanaging
• High-accountability operators who prioritize responsiveness, safety, professionalism, and customer experience
• Builders who are energized by growing teams, scaling processes, and strengthening culture from the inside out