Jobs in Scottsville New York

Do you want to become a surrogate? We are now offering a sign on bonus to all qualified and matched surrogates that sign contracts. The first step is to fill out our surrogate application. A fertility specialist will contact you to continue the process. For intended parents interested in surrogacy to start or grow their families please contact us today. The surrogacy process is complex, but we will be with you every step of the way. Call today to get started.

Women who may have the ability to produce eggs but are unable to use their uterus or do not have a uterus, may consider a surrogate. A donated egg may also be used with the surrogate in the event a woman cannot produce her own eggs or her uterus is not intact or insufficient to carry a pregnancy. In either case, the husband's sperm, if viable, may be used.

Using an egg donor unrelated to the surrogate carrier eliminates any biological tie. The egg of the surrogate is never used as part of the assisted reproduction process, so that a surrogate is never in the position of delivering her own biological child.

The basic requirements of a woman to serve as a surrogate are:

• Emotionally stable
• Responsible
• In good physical health
• Non-smoker
• Has had at least one successful pregnancy
• Is capable of carrying a child to full term

A woman is not required to fall within a particular age range to serve as a surrogate, but most intended parents prefer a surrogate under the age of 40. For more information on surrogacy please see the documents on the left side of this page.

In Texas, there is a judicial process for validating the Gestational Contract (the contract between the intended parents and the surrogate). Included within the various requirements for having a Gestational Contract validated by a Texas court is that the intended parents must be married and the surrogate must have previously carried a child to term. Additionally, there are residency requirements that apply to either the surrogate or the intended parents, but not both.

Compensation for a surrogate services generally starts in the range of $35,000 - $40,000, for base compensation with over all fees up to 70k, in many cases. The amount of compensation is dependent upon a variety of factors, including, but not limited to, whether the surrogate carries twins, what procedures a surrogate is required to undergo and whether the delivery is vaginally or by cesarean section.

• 
  
• Specific Responsibilities Duties are listed based on the estimated % of time Responsibilities Acts as the Ergonomic Specialist for corporate and field locations.
  
• Conducts on-site and telephonic assessments of employees' workstations as needed to address discomfort and reduce the risk of injury.
  
• Coordinates companywide network of safety representatives including recruitment recognition and creation and implementation of a robust communications strategy.
  
• Serves as company champion driving this initiative.
  
• Keeps records of ergonomic discomfort and at work injuries to ensure safety/ergonomics issues are addressed to completion and to provide data for Safety Program improvement efforts.
  
• Proactively develops and implements strategies and techniques to reduce ergonomic discomfort workers' compensation cases and absenteeism.
  
• Enters and maintains accurate LOA data into the appropriate databases to ensure compliance with absence management laws.
  
• Coordinates with internal IT Department when needed to restore access for employees who have returned from leave.
  
• Generates letters to employees on leave informing them of their rights and responsibilities under the Americans with Disabilities Act (ADA).
  
• Assists the employee and supervisor in return-to-work placement to support stay at work/return to work initiatives.
  
• Initiates ergonomic referrals to accommodate a physical restriction and assist in returning the employee to work.
  
• Responds to incoming team emails queue calls voice mails and faxes with first call resolution.
  
• Maintains copy of all communications in employee's file.
  
• Sends manager surveys to leaders whose employees recently returned to work.
  
• Analyzes responses to provide recommendations.
  
• Contacts managers who request follow up call.
  
• Provides guidance and procedural practices to internal and external partners to collaborate and assist in the daily operations of the LOA department including statutory state wage confirmation requests and all other leave and wage verification requests.
  
• Assists in the development of reports and tools to partner with Benefits and HR partners to make decisions concerning employment status and program enhancements.
  
• Initiates test plan as needed for Oracle HRIS system updates.
  
• Utilizes various Business Objects reports to identify necessary updates and coordinate reporting changes with the HR systems support group.
  
• Submits weekly membership file/eligibility lists to disability vendor and ensures the accuracy of the reports that are used as the basis for wage replacement to employees on LOA.
  
• Keeps abreast of legislative changes and industry trends in the disability and leave management administration.
  
• Maintains Absence Management employee and supervisor communications resource tools and check lists which include but are not limited to template letters and the company intranet.
  
• Oversees Driver Safety Program and other health and safety initiatives.
  
• Works cross-functionally within wellness and safety team including implementation of programs and events and processing of workers compensation claims.
  

• 
  
• Act with uncompromising integrity.
  
• Provide outstanding service and build trusted relationships.
  
• Drive innovation in our products and services and continually improve our processes.
  
• Work in partnership and support each other.
  
• Be personally accountable and deliver on commitments.
  
• Treat each other with respect and dignity.
  

• 
  
• Experience in leave of absence management including the Americans with Disabilities Act (ADA) and state/federal family leave provisions.
  
• Preferred 2 years of experience in welfare benefits or general HR experience.
  
• Preferred 1 year of experience in safety and ergonomics.
  
• Preferred Skill/Ability Strong verbal communication and listening skills.
  
• Demonstrated analytical skills.
  
• Demonstrates project management skills.
  
• Excel Word and Oracle experience.
  

• 
  
• Desired License/Certification Certified Office Ergonomics Evaluator- 1 year preferred
  

• 
  
• Deliver quality customer service to clients via phone, e-mail, chat, and other modes of communication including documentation of all interactions.
  
• Timely follow up on outstanding items to ensure resolution of issue in alignment with the Client's Service Level Agreement (SLA).
  
• Develop and maintain working knowledge of Clients products, policies, and procedures.
  
• Maintains prioritization and organization of assigned tasks with a significant focus daily, time-sensitive duties.
  
• Responsibilities may vary based on assignment and may include internal or external client support, completion of payments and filings, assisting clients with tax agency account registrations or related tasks, tax notice research through resolution, data entry, spreadsheet creation, and data verification.
  
• May use systems such as HRIS, Oracle, MasterTax, Prism, Salesforce, BNA, ClientSpace, and Microsoft Office products; existing knowledge is helpful but not required.
  
• Demonstrate Clients values of integrity, service, innovation, partnership, accountability, and respect.
  
• Other duties as assigned.
  

• 
  
• High School graduate or equivalency.
  
• 2+ years of working experience.
  
• Payroll or tax experience preferred.
  
• Attention to detail with focus on accuracy, completeness, and timeliness.
  
• Strong written and verbal communication skills.
  
• Ability to manage multiple systems and tasks simultaneously.
  
• Excellent customer service and interpersonal skills.
  
• Ability to work independently and prioritize in a high-volume, deadline-driven environment.
  
• Familiarity with online knowledge bases and research tools.
  

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: COE

Shift - 12 Hour Nights - 2-2-3 Schedule

SUMMARY: Directly supervises production employees and carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.

Other duties may be assigned.

• Safety
• Leads safety efforts throughout all departments in manufacturing.
• Actively participates in safety programs and makes safety observations, also is a contributing member of a safety team.
• Reviews all observations and accepts responsibility for follow up.
• Conduct Incident investigations & send out by email before the end of the shift when an incident happens.
• Follow up investigation & TOR completed with the department manager within 24hrs.
• Accountability for fire drills & tornado drills, where applicable.

• Equipment Facilitator
• Manages & is responsible for operations of assigned machines 24 hours a day.
• Housekeeping, implementation & maintaining the 5s program.
• Conduct meetings daily with assigned personnel.
• Review Safety Concerns, Maintenance Concerns, Production #s, and Customer complaints.
• Responsible for evaluating employees assigned on shift.
• Look ahead on the schedule & have run conditions for jobs.
• Coordinate with maintenance the work orders & PMs.

• General Responsibilities
• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Management representative responsible for all plant operations on off shifts and weekend operations.
• Approves color matching for presses on scheduled shift, where applicable.
• Strong communication with Department Managers on all process and personnel issues.
• Makes decisions concerning troubleshooting and employee issues.
• Knows, understands, implements, & enforces plant procedures and policies.
• Processes shift reports from production and waste on scheduled shift.
• Analyzes production and improves process where opportunity exists.
• Sign off on Finishing run sheets ensuring correct specs are maintained and schedule is accurate on night shifts.
• Leads teams formed to deal with production, manufacturing and safety issues.
• Daily 5s shift audits.
• Daily production status report
• Ensure Raw Material Rejections have required MFG data to process. Coordinate priorities and efforts of maintenance and the engineers
• Inspecting & sign off on all retains & ensure that good quality product is being produced.
• Cylinder check sheets.
• Adjust crews accordingly to minimize OT but still meet goals.
• OK sheets filled out & check off.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

Associate's degree (A. A.) or equivalent from two-year college or technical school; with one-year related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS

The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Chili, NY

HOURS: Days 7am - 7pm on a 2-2-3 schedule

SUMMARY: Assist in daily operations of the Finishing Department.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Participates in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero-accident rate.
• Retrieves all necessary set up information/specifications/guidelines and follows instructions on the job jacket.
• Safely, efficiently and effectively assists with the assigned production machinery equipment monitoring quality, production and waste adhering to all customer specifications.
• Ensures immediate work area and work areas for which Machine Operator has responsibility are free of clutter and debris. Perform all cleaning/sanitation responsibilities, safely using all required cleaning solutions and protective equipment.
• Monitors all quality requirements as outlined by company procedure and specification. Completes necessary sheets for quality checks.
• Actively participates in safety programs and completes required safety observations. Understands and follows plant safety rules.
• Attends and participates in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.).
• Able to work all scheduled shifts and required overtime hours.
• Trains new employees as necessary.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) required. Previous manufacturing experience preferred.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee is occasionally required to walk and reach with hands and arms. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Chili, NY

Hours: DAYS 7am-7pm on a 2-2-3 schedule

SUMMARY: Slits printed rolls from the press or Extruder to individual rolls as per customer specifications. Material being slit is inspected for quality/defects and finished rolls are palletized for shipment to the customer.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Reads job specifications to determine machine adjustments and material requirements.
• Sets up machine.
• Uses lowboy to mount full rolls onto machine.
• Observes machine operation to detect material defects or machine malfunction.
• Measures material dimensions to determine accuracy of machine operation.
• Performs minor machine maintenance such as oiling/greasing machines and changing female knives.
• Prepares required paperwork, including daily production reports, SPC charting, roll tickets and inventory tags.
• Completes work orders when necessary.
• Actively participates in safety programs and makes safety observations. Follows plant safety rules.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms and talk or hear. The employee is occasionally required to walk and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to humid conditions, airborne particles, and vibration. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

American Packaging Corporation (APC) is one of the top flexible packaging converters serving customers throughout North America. We are always seeking to improve our operations, deliver more innovation and value, and give back to our local communities. Our longstanding success as custom flexible packaging suppliers has been fueled by our commitment to providing more innovation, more quality, and more responsive customer service, along with our strategic investments in the latest technology.

LOCATION: Chili, NY & Rochester, NY

SUMMARY: Responsible for overall statistical process control software setup by safely performing all testing procedures and ensuring conformance to established specifications. Additionally, manage shift quality improvement initiatives through training, awareness, and analysis of facts and data.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Participate in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero accident rate.
• Implementation of SPC Software Package.
• Analyze trends in production/process data through statistical evaluation methods.
• Determines test objectives and standards by studying software requirements; writing test cycle plans, test cases, and test scripts.
• Meets test objectives by determining testing methods, cycles, phases, and conditions; setting up testing environment and equipment.
• Identifies software capability and reliability by conducting functional, system, and performance tests and resolves testing problems.
• Completes tests by training and directing others that will use the system.
• Maintains testing database by developing defect tracking and regression testing information requirements; designing information system; enters test outcomes; secures data.
• Reports test outcomes by collecting, analyzing, interpreting, summarizing, and displaying data; recommending software changes.
• Maintains test environment by developing test environment; enforcing and complying with procedures, rules, and regulations.
• Assist Quality Assurance Manager in determining Process Capabilities within the Laboratory and out on the Production Floor.
• Assist with raw material and/or quality issues; i.e., completion of and facilitation of reject/hold forms, supplier certification, customer complaint investigations, etc.
• Maintain Manufacturing Specifications and Operating Specifications.
• Analyze and Recommend Optimal QA Testing Requirement.
• Support Process/Product Trials through active involvement with Suppliers/Vendors, Customers, Manufacturing and Technical.
• Maintain a safe and organized laboratory area.
• Review and accurately file all production test data.
• Maintain and update Raw Material Specification files.
• Review, verify and file all Supplier Certifications.
• Prepare, verify and submit requested COA's for customers.
• Attend and participate in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.).
• Strictly adhere to all company uniform guidelines.
• Any other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• EDUCATION and/or EXPERIENCE: Bachelor's degree (B.A.) from a four year college or university, preferably in Statistics, with interest in aspects of Math, Computer Science and Engineering. In addition, candidates with experience in Test Driven Development (TDD), strong knowledge and understanding of test methodologies, demonstrated technical ability to understand test code and familiarity with quality assurance processes/procedures is preferred. Also, experience preferred with SQL, Microsoft Office Suite and SPC software programs such as Zontec, WinSPC, STAT Graphics, etc. Ability to work in a fast paced, rapidly changing environment with minimum supervision.
• LANGUAGE SKILLS: The ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, SOPs and governmental regulations. Ability to write reports, business correspondence and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers and the general public.
• MATHEMATICAL SKILLS: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio and percent and to draw and interpret bar graphs. Ability to apply concepts of basic algebra and statistical process control. Ability to measure accurately using a graduated ruler.
• REASONING ABILITY: Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to interpret extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to stand and use hands to finger, handle or feel objects, tools or controls. The employee is occasionally required to sit, reach with hands and arms, walk, stoop, kneel, crouch or crawl and climb or balance. The employee is regularly required to hear.

This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, distance vision, ability to adjust focus, depth, and color vision. Employee must also be able to taste/smell.

WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Exposure to wet/humid conditions due to manufacturing plant not being air conditioned.

• The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position please contact our Human Resources department at .

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Chili, NY

SCHEDULE: 7pm - 7am on 2-2-3 schedule

SUMMARY: Identifies and segregates defective material within individual slit rolls. Combines leftover good material into finished rolls and palletizes for shipment to the customer.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Mounts slit rolls of product onto shaft of machine using lift cart. Removes rolls as well.
• Sets up and makes necessary adjustments to the machine.
• Must be able to identify defects and splice good material together per spec.
• Reads and understands specs of products being run. Must know packaging materials required for palletizing finished product also. Occasionally uses hand tools to prepare packaging materials.
• Completes daily production reports.
• Operates stretch wrap machine to wrap finished pallets.
• Regularly cleans machine and surrounding area.
• Actively participates in safety programs and makes safety observations. Follows plant safety rules.
• Other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

High school diploma or general education degree (GED). Dr Winder experience a plus.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common, fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee is occasionally required to stand; walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to vibration. The noise level in the work environment is usually.

moderate

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

12 Hour Days or 12 Hour Nights

SUMMARY: Safely, efficiently and effectively operate assigned production machinery meeting or exceeding safety, quality standards, efficiency, machine set-up, waste and non-chargeable downtime standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Participate in training, embrace concepts of and actively practice the STOP Safety Program fundamentals to aid American Packaging Corporation's efforts to achieve a zero-accident rate.
• Retrieve all necessary set up information/specifications/guidelines. Complete all machine changeover/set-up processes minimizing machine downtime and meeting or exceeding set-up standard requirements. Develop set up procedure documentation as required.
• Safely, efficiently and effectively operate assigned production machinery equipment monitoring quality, production and waste adhering to all customer specifications.
• Observe and adhere to all safety guidelines
• Ensure adhesives have sufficient bond, strength and clarity
• Monitor glue pumps and fill as needed
• Make mechanical machinery adjustments as required Complete roll changes as needed
• Successfully correct web breaks
• Complete necessary sheets for Quality checks
• Complete shingle board and proper sampling procedures
• Monitor all quality requirements as outlined by company procedure and specification.
• Direct all resources assigned to the manufacturing line to effectively accomplish the above.
• Effectively observe and judge color.
• Ensure product produced meets the quality requirements as defined by Quality Assurance.
• Provide task leadership for all Utility and printing personnel assigned to respective equipment.
• Ensure all required on-line quality data is properly documented.
• Ensure all start-up material meet specification requirements.
• Pre-plan next job before completion of current job.
• Work with and direct activities of assigned Press Helper.
• Troubleshoot and solve printing problems.
• Ensure inks run at proper viscosities.
• Correctly complete daily production sheets, process condition sheets, waste logs and quality inspection logs. Ensure job order information (size, construction, print position, packing instructions, adhesive structures, and proper substrates being used) corresponds with the product being manufactured.
• Distinguish deviance between established manufacturing packing specifications reporting deviations to appropriate personnel.
• Deliver accurate and concise information to adjacent shifts and Shift Supervisors in a timely fashion. Properly flag & document defects in master rolls accurately for next operator.
• Ensure immediate work area and work areas for which Machine Operator has responsibility are free of clutter and debris. Perform all cleaning/sanitation responsibilities, safely using all required cleaning solutions and protective equipment.
• Able to work all scheduled and required overtime hours.
• Able to work all scheduled shifts. * Attend and participate in all scheduled meetings (Continuous Quality Improvement, safety, special projects, departmental, etc.).
• Strictly adhere to all company uniform guidelines.
• Business travel required.
• Any other duties as assigned by the Shift Supervisor.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

EDUCATION and/or EXPERIENCE

High school diploma or equivalent required. Previous manufacturing experience preferred.

FOOD SAFETY TRAINING REQUIREMENTS

Food Safety Training, consisting of the GMP/PPE/Food Safety Policy, HACCP Plan and SQF System is provided to all personnel at the time of hiring. Refresher training is completed annually, based on the anniversary month of the employee's date of hire. Completion of this training is a condition of employment.

LANGUAGE SKILLS

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS

While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; talk or hear; and taste or smell. The employee frequently is required to reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include color vision.

WORK ENVIRONMENT

While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals and risk of electrical shock. The noise level in the work environment is usually loud.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at .

For over a century, American Packaging Corporation (APC) has been a leading flexible packaging converter for customers throughout North America. We nurture our employees by providing competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs. These are just a few reasons why we were named a "Best of the Best" in the Best Workplaces in the Americas awards for 12 years in a row. APC's longstanding success is fueled from the inside out, and we consistently seek to improve our internal operations to propel that success into the future.

Prepress Operator

Hours: 12 Hour Nights 7pm-7am, 2-2-3 schedule

SUMMARY: To prepare and stage press or laminator jobs. Prepress personnel are used in any capacity needed to stage items at any machine. They may retrieve and prepare cylinders for press run and after the press run, clean the cylinders and store them. All of these functions must be performed in the safest, most effective and efficient manner while adhering to established SOP's and quality standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:

• Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed.
• Actively participate and embrace in the STOP Safety Program fundamentals and adhere to all safety guidelines and rules to aid APC's efforts to achieve a zero-accident rate.
• Participate as a Subject Matter Expert in developing, understanding, and following Standard Operating Procedures and or training documentation.
• Print and understand each job's Job Jacket, Print Specification, and Manufacturing Specification and take to the press.
• Retrieve daily production schedule that identifies which job will run, quantities, priorities, etc. Interpret and act upon information.
• Detect, report, and resolve all missing or substandard machine parts.
• Use an automated storage system terminal to retrieve and return cylinders and anilox to storage.
• Coordinate with Mounting Dept with respect to the production schedule and the staging of jobs. *Applies to Story City, IA COE
• Assemble and transport print cylinders and aniloxes between printing press and prepress departments.
• Place cylinders on assembly table and install the gears and journals. Install the pans, applicator pipes, end shields, splash guards and cylinders into the carriage units. *Applies to Roto COE.
• Return the units to prepress, remove the parts, clean up the cylinders, and store them back into the storage system after a job has run. *Applies to Roto COE.
• Aid on press set-ups as needed. Assist miscellaneous housekeeping and cleaning responsibilities.
• Operate daily a core cutter to produce accurate size cores for each scheduled print job.
• Complete required reports and paperwork. Use a computer terminal.
• Perform required cleaning tasks - some daily, weekly or monthly requirements.
• Obtain Power Industrial Truck license(s).
• Effectively communicate with coworkers throughout all shifts.
• Attend and participate in all company mandated meetings.
• Business travel may be required.
• Any other duties as assigned.

QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

REASONING ABILITY: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to reach with hands and arm. The employee is occasionally required to walk. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision.

WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future.

LOCATION: Chili, NY

HOURS: DAYS 7am - 7pm on a 2-2-3 schedule

SUMMARY: Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. This position can present the motivated employee with several career options as the company grows and he/she gains expertise and knowledge.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Performs visual inspections and physical tests utilizing equipment in Lab. Products are tested for a variety of qualities such as dimensions, performance or chemical characteristics.
• Records and evaluates test data and writes reports.
• Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.
• Enters data into computer for analysis.
• Prepares certificates of analysis on finished product for our customers.
• Able to use and read measuring instruments as well as operating instructions and procedure manuals.
• Trial reports, inspection and tracking.
• Assist QA and Technical departments in their duties.
• Must take responsibility for work assigned.
• Effective communication skills, both verbal and written.
• Support and follow all plant Safety Rules, GMPs, and other procedural training requirements.

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position.

EDUCATION and/or EXPERIENCE:

Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate.

American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran.

If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at:

.

TBG I The Bachrach Group is engaged in a search with a prominent Law Firm searching for a new addition to their renowned Commercial Real Estate Team. This is an established team with work life balance. 3+ years experience high level, substantive, complex, high value transactions.

Clientele ranges from large to mid size Fortune 500's, and then a variety of asset classes with other retailers and developers doing a nice mix of financing, acquisitions and dispositions; commercial leasing; condominium and planned communities; construction; environmental law; groundleasing; joint ventures; sale-leasebacks; and tax appeals and exemptions.

Looking for candidates who want mentorship, professional development, and enjoy a fresh, forward thinking approach to business. Please send resume to for immediate consideration.

Corporate Attorney

Our client is seeking a corporate attorney with at least one to seven years of significant transactional experience for the firm’s Rochester or Buffalo office.

The ideal candidate will have meaningful experience in mergers and acquisitions as well as general corporate matters.

Candidates must have excellent drafting and negotiation skills and a strong academic background.

Our client, a well-established and highly respected AM Law 200 firm, is looking to add a Trusts & Estates Junior Partner to their growing team in Rochester, New York.

Responsibilities of the role include:

• Working with high-net-worth clients and business clients on estate, gift and GST tax planning
• Business succession planning
• General estate and trust planning
• Transactional work, including drafting wills, revocable and irrevocable trusts and operating, shareholder, and other owner agreements.
• Forming and structuring business entities
• Quantifying tax impacts of estate and business succession plans
• Supervising the preparation of accountings and estate, gift, and fiduciary income tax returns and addressing procedural and disputed matters.
• Will also be responsible for developing and maintaining relationships with clients, referral sources, and other attorneys within the firm.

Candidates must have the following experience/credentials:

• Juris Doctor degree from an accredited law school with strong academic credentials
• LLM in tax a plus
• A minimum of 5-7 years of Trusts & Estates experience in a law firm setting
• Must be admitted to practice in New York State.
• Admittance to also practice in Florida a plus.
• Ability to manage multiple matters, and deadlines in a fast-paced environment.
• Ability to work collaboratively with other practice areas to provide comprehensive solutions to clients
• Excellent written and verbal communication skills

The firm offers competitive compensation and a comprehensive benefit package. At this time, the good faith estimate of the annual salary range for this position is $150,000 to $200,000. Where a successful applicant is slotted within this range will vary based on legitimate criteria, such as experience, skill level and portable book of business.

If you are interested in learning more about this role, please apply with your resume to

Kodak is looking for Technicians to join our team in Kodak’s Advanced Materials and Chemicals Division in Rochester, NY.

Technicians work in a variety of roles, all of which are involved in manufacturing the highest-quality light-sensitive coated products in the world. Depending on qualifications and experience, technician candidates will be assigned a role in one of these areas.

Components Testing: Kodak’s legacy is the production of the finest coated film products in the world. This starts with testing all the components that go into our films and ensuring that they meet our tight standards. Technicians test our liquid components – from gel to sensitized emulsion layers – for chemical concentrations, particle size, density, viscosity, and light sensitivity, etc. Materials of unknown origin, such as dust, and components with unexpected results are also subjected to special testing to determine root cause and origin.

As a technician, you will likely:

• Work in both light and dark room conditions.

• Work 12-hour rotating shifts (days one week, nights the next).

• Work overnights.

• 2–5 years of employment experience

Required skills and experience for all technicians:

• Must be a detail-orientated team player.

• Must have the ability to be flexible between multiple positions, sometimes multi-tasking or moving within a shift.

• Must work effectively with minimal supervision.

• Ability to prioritize work to meet business needs.

• Ability to express oneself communicate clearly, both written and verbal, and comprehend a variety of work requests

• Willing to work overtime or adjust work schedule for business needs.

• Must be willing and able to lift and move objects up to 50 pounds.

• Must maintain a clean work area.

• Must maintain strict adherence to safety procedures and quality standards.

• Computer proficiency including navigating screens and data entry.

• Involvement in product quality and process improvement activities.

• Interaction with operators, engineers, and maintenance personnel.

Preferred additional skills and experience:

• Associate’s degree, technical certifications or equivalent

• At least 2 years of hands-on experience in a manufacturing environment.

• Understanding of film photography.

• Understanding of thin-film coating processes.

• Strong problem solving, data analysis, and computer abilities (Excel, Word, etc.).

• Knowledge of Outlook, One-LIMS, Felix, and the SAP system.

We recommend watching the following videos to learn more about the manufacturing process at Kodak.

A tour of our PET film base manufacturing plant.

How Does Kodak Make Film? (Kodak Factory Tour Part 1 of 3)  tour of our film sensitizing plant.

How Does Kodak Make Film? (Kodak Factory Tour Part 2 of 3) 

Chase and Associates is partnering with an established, family-owned packaging leader as they expand into sustainable manufacturing. We are seeking a Plant Manager to lead operations at their facility.

What You’ll Do:

• Direct all manufacturing operations including Safety, Production, Quality, Shipping, and Maintenance/Engineering.
• Lead safety culture by actively participating in committees and ensuring compliance with GMPs and food-safe practices.
• Collaborate with department managers to assess manufacturing issues, review backlogs, and adjust production focus.
• Troubleshoot daily operational problems using mechanical aptitude and assist teams in finding solutions related to operator, method, or machine.
• Analyze production and quality reports to identify issues, develop improvement plans, and implement capital projects.
• Manage departmental spending, develop efficient use of materials and employees, and monitor budgets.
• Supervise Department Managers and Engineers, conduct performance evaluations, and handle employee relations.

What You Need:

• MUST HAVE: Plant Management experience in manufacturing (packaging, food, or industrial goods preferred).
• Strong leadership skills with experience managing supervisors and frontline teams.
• Solid mechanical/electrical knowledge of high-speed manufacturing equipment.
• Excellent communication skills and ability to align division goals with corporate strategy.
• Experience with capital projects, continuous improvement, and operational reporting.