Engineering Jobs in Rowley, MA

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Principal Product Engineer will learn the technical aspect of key product in the Andover, MA factory.  The Product Engineer will be product centric technical liaison, focused on driving collaboration across work centers and all disciplines to resolve technical issues, improve efficiencies and optimize overall product yield to ensure high-quality and cost-effective products and systems. You will utilize data analysis, CORE methodologies, and technical understanding to maximize overall product test yield, efficiency, and value.

What You Will Do

• Address major yield and technical issues highlighted by tech leads and factory operation managers.

• Perform data analysis and provide direction for overall product yield and performance improvement.

• Facilitate collaboration across manufacturing work centers and design engineering.

• Empower production test engineer to resolve complex failures through data driven troubleshooting technique.

• Establish technical understanding of the product architecture, subassemblies, and test requirement.

• Partner with test and design engineering team to develop sustaining solution to technical problems with root cause and corrective action identification.  

• Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment.

Qualifications You Must Have  

• Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and typically a minimum 8 years of relevant experience

• 4+ years in Production testing/troubleshooting

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Preferred majors: Electrical Engineering, Computer Science/Engineering Technology

• The ability to interpret and analyzer RF parametric data

• Experience with lean principles in a manufacturing environment

• Current DOD Secret Security Clearance

• Excellent communication skills (written and verbal) and presentation skills

• Good interpersonal skills to manage tasks that bridge operations, production control, engineering, supply chain, and customer relations

• Experience applying technical principles in the manufacturing life cycle

• Experience with Quality Systems and their application

• Shop Floor Management

• Strong engineering aptitude and analytical skills

• Technical problem solving

• Customer and company oriented and driven to meet or exceed expectations

• Ability to work cohesively in a team environment

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is not available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Systems Engineering, Integrated Systems Department is seeking a Systems Engineering Technical Lead for the NASAMS product line. This role requires strong technical expertise and engineering leadership skills to drive the design and development of world-class air and missile defense systems.

The Integrated Systems Department supports Raytheon by providing world-class weapon systems engineering. Domain expertise includes radar systems, effector systems, battle management, command and control, network design, battlespace integration, and interoperability for both domestic and international customers.

You will work alongside motivated engineers who are responsible for conducting systems engineering studies and trades; supporting system requirements definition and analysis; and contributing to algorithm development, integration, test, and evaluation.

What You Will Do

• Provide technical oversight and management for a variety of Systems Engineering efforts

• Concept and requirements development (including decomposition and flowdown) within a mature product-line

• Concept of Operations (CONOPS) development and design

• Algorithm optimization and development

• Multi-disciplinary development efforts across the kill-chain for an Air and Missile Defense System

• Collaboration with customer to bring new capabilities to the warfighter

• Functional analysis of real world and test data; trade studies to bring advanced features to fielded system

• Support and lead Internal and External Program and Design Reviews

• Collaborate with other IPT/CPT leads from the various functions and products

• Support and lead Internal Research and Development for future capability upgrades

• System integration and test support, including live fire test events

• Periods of travel up to 25% of time both domestically and internationally

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience

• Experience with Air Defense Systems in systems engineering roles supporting development or production

• Experience with managing budget, scope and/or earned value

Qualifications We Prefer

• Experience interfacing with external customers and industry partners

• Excellent communication skills, written and verbal, with a variety of audiences

• Self-motivated, passionate leader

• 5+ years of experience in Air Defense Systems, Systems Engineering production or development

• Existing DoD Security Clearance

• Knowledge of Air Defense systems (examples – Patriot and NASAMS Systems)

• Experience managing competing programmatic priorities

• Experience making challenging technical decisions

• Familiarity with the Raytheon Integrated Product Development System (IPDS) or equivalent

• Experience with Earned Value Management (EVM) (plus, experience with Raytheon execution of EVM)

• Advanced degree in EE, CE, Physics, Math, ME, Aerospace\

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Locations: Atlanta | Boston | Heredia

Who We Are

Boston Consulting Group partners with leaders in business and society to tackle their most important challenges and capture their greatest opportunities. BCG was the pioneer in business strategy when it was founded in 1963. Today, we help clients with total transformation-inspiring complex change, enabling organizations to grow, building competitive advantage, and driving bottom-line impact.

To succeed, organizations must blend digital and human capabilities. Our diverse, global teams bring deep industry and functional expertise and a range of perspectives to spark change. BCG delivers solutions through leading-edge management consulting along with technology and design, corporate and digital ventures—and business purpose. We work in a uniquely collaborative model across the firm and throughout all levels of the client organization, generating results that allow our clients to thrive.

What You'll Do

POSITION DESCRIPTION

We are seeking a motivated and experienced Technical Application Engineer to lead the engineering, administration, and optimization of personal productivity applications across BCG. This role plays a critical part in ensuring that BCG's suite of productivity tools—including Microsoft 365, Adobe Acrobat and Creative Cloud, and other integrated third-party applications—are implemented and operated at peak performance. As a key member of the Productivity Tools team within BCG’s Personal Productivity Organization, you will collaborate with product owners, vendors, and architects and engineering teams to ensure seamless user experiences, effective governance, and ongoing operational excellence.

Key Responsibilities:

• Engineering & Administration
• Manage and configure enterprise application services across both legacy and cloud platforms.
• Lead upgrades, rollouts, patching, and migrations for a variety of applications.
• Conduct health checks, monitoring, troubleshooting, and performance tuning.
• Integrate applications with third-party platforms or in-house solutions.
• Support complex deployments and ensure high availability of services.
• Governance, Documentation & Support
• Define and maintain SOPs, administrative practices, and end-user documentation.
• Develop governance frameworks around licensing, lifecycle, and architecture.
• Provide Tier 3 escalation support and resolve complex technical issues.
• Mentor service desk teams and promote best practices in application usage and management.
• Collaboration & Cross-Team Engagement
• Coordinate with network, security, and support teams for seamless application service delivery.
• Participate in planning, migrations, upgrades, and project execution.
• Liaise directly with Microsoft, Adobe and other vendors for advanced configuration and support scenarios.

Core Focus Areas:

• Deliver robust engineering and operational support for Microsoft 365 apps, add-ins, Adobe Acrobat, MS Forms, and other productivity tools.
• Drive standardization and operational consistency across the firm’s application portfolio.
• Provide leadership and guidance within the M365 Application Governance Council.
• Contribute to the strategy and implementation of productivity-enhancing tools firmwide.

What You'll Bring

Experience Required:

• 5+ years of experience managing enterprise-grade applications, with 3–5 years specifically in Microsoft 365 administration and technical product analysis.
• Proven experience in Adobe Creative Cloud deployment and productivity enablement.
• Strong background in enterprise M365 configuration and governance, including automation tools like Power Automate and scripting with PowerShell and Microsoft Graph API.
• Advanced capabilities using GraphAPI, PowerShell, SQL, and Power BI for:
• Scripting and bulk administration
• Automating service management
• Data analysis and backend reporting
• Visualizing application performance metrics
• Background in implementing GenAI capabilities across Microsoft 365 (e.g., Powerpoint, Word, Excel) is a significant plus.
• Familiarity with Azure AD, Conditional Access, Defender for Office 365, Intune, and related services.
• Expertise in managing applications in a cross platform environment such as Windows, Mac (OSX), and iOS platforms.
• Experience across application development life cycles, including requirements design, development tracking, change/release management, and operational support.
• Ability to identify and manage integration dependencies across M365 apps and third-party solutions.
• Strong incident management, security compliance, and vulnerability remediation experience.
• Track record in defining KPIs and reporting on performance and service stability.
• Level C2 English proficiency as demonstrated by IELTS 8.5+, TOEFL iBT 110+, TOEIC 945+, CAMBRIDGE CPE, or comparable demonstrated proficiency.
• B.S. CS/MIS or four (4) additional years relevant experience in lieu of degree

Preferred Qualifications:

• Certifications such as MS-100, MS-101, SC-300, AZ-900 are highly desirable.
• Agile/Scrum experience and familiarity with Jira, Confluence, or Azure DevOps.
• Prior involvement in enterprise-level security policy enforcement and tooling compliance.
• Strong communication skills with an ability to convey technical issues to non-technical stakeholders.
• Key Attributes for Success:
• Excellent organizational and time management skills.
• Proven ability to manage multiple priorities in a fast-paced environment.
• Proactive problem-solver with a collaborative mindset.
• Clear, confident communicator with strong documentation capabilities.

Additional info

*** For US locations only ***

In the US, we have a compensation transparency approach.

Total compensation for this role includes base salary, annual discretionary performance bonus, retirement contribution, and a market leading benefits package described below.

• The base salary range for this role in Atlanta is $121,000.00 - $147,700.00 

This is an estimated range, however, specific base salaries within the range depend on various factors such as experience and skill set. It is not common for new BCG employees to be hired at the high-end of the salary range. BCG regularly reviews its ranges to ensure market competitiveness.

In addition to your base salary, your total compensation will include a bonus of up to 16% and a generous retirement contribution that starts at 5% and moves to 10% after 2 years.

All of our plans provide best in class coverage:

• Zero dollar ($0) health insurance premiums for BCG employees, spouses, and children

• Low $10 (USD) copays for trips to the doctor, urgent care visits and prescriptions for generic drugs

• Dental coverage, including up to $5,000 in orthodontia benefits

• Vision insurance with coverage for both glasses and contact lenses annually

• Reimbursement for gym memberships and other fitness activities

• Fully vested Profit Sharing Retirement Fund contributions made annually, whether you contribute or not, plus the option for employees to make personal contributions to a 401(k) plan

• Paid Parental Leave and other family benefits such as elective egg freezing, surrogacy, and adoption reimbursement

• Generous paid time off including 12 holidays per year, an annual office closure between Christmas and New Years, and 15 vacation days per year (earned at 1.25 days per month)

• Paid sick time on an as needed basis

Boston Consulting Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity / expression, national origin, disability, protected veteran status, or any other characteristic protected under national, provincial, or local law, where applicable, and those with criminal histories will be considered in a manner consistent with applicable state and local laws.

BCG is an E - Verify Employer. Click here for more information on E-Verify.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Systems Engineering & Test Capabilities team discipline is seeking a Test Architect to support the NASAMS® surface to air defense system programs.  The Test Architect (TA) will be accountable for architecting a technically sound approach for the Test and Evaluation (T&E) strategy for the entire lifecycle of the product along with influencing the prime item architecture to support that strategy.
 

What You Will Do

• Responsible for test strategy for all aspects of the program and defines metrics to gauge progress.

• Responsible for defining or optimizing test environments and requirements to ensure on-time deliveries.

• Responsible for interface and coordination with internal and external organizations on test strategy, coordination, execution, and reporting activities.

• Extensive interaction with Program Managers, Directorate Leads, Chief Engineers, and technical subject matter experts (SMEs).

• Coordinate with other program disciplines to draw on their SMEs to address emergent issues across the systems, software, and hardware domains.

• Represent the interests of the Systems Integration and Test (SI&T) discipline on the program.

• Interface with the customer community on a regular basis to share test status, issues, and address programmatic concerns.

• Knowledge base for Model Based Systems Engineering and how to use this in Integration and Test for test strategy.

• International travel up to 20%, Regular travel between Raytheon locations in Massachusetts and Southern New Hampshire is required.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience

• Experience with formal system test activities, including ground tests, flight tests, system verification, and system integration check out events

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date with the ability to obtain a Final Secret U.S. government issued security clearance after start.

Qualifications We Prefer

• Excellent technical writing and formal presentation experience

• Strong proven communication skills

• Raytheon Test Architect Certification

• Experience with Department of War or similar major programs throughout the product lifecycle

• Active and transferable U.S. government issued security clearance is required prior to start date.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Welcome to Raytheon in Andover, MA

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon is currently seeking a Test Equipment Design Engineer (Test Development Engineer II) to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures.  

You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing.

Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment.

This role is 100% onsite in Tewksbury, MA

What You Will Do

• Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital)

• Actively identify test readiness issues and optimizations throughout the development lifecycle.

• Understand and meet established project budget, schedule, and performance commitments

• Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers.

• Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision

• Engage in personal technical growth

• Prepare and clearly present your work product at project status meetings

• Support Manufacturing operations, including on-site troubleshooting and debugging

Qualifications You Must Have

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM)

• Minimum of two (2) years of relevant engineering experience

• Experience in electrical engineering design and/or software automation concepts and applications

• US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date.

Qualifications We Prefer

• Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts

• Experience with decision-making and problem-solving skills

• Experience working as a member of a team

• Experience with National Instruments’ TestStand, LabWindows/CVI, and/or LabVIEW

• Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design

• Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligibility

Learn More & Apply Now!

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Raytheon will sponsor clearance. Interim Secret Clearance required prior to start.

• This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information - part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

  The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

  RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

  Privacy Policy and Terms:

  Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Naval Power is seeking a highly motivated Production Integrated Product Team Lead (IPTL) for the SPY-6 Array production program’s Array Build, Integration & Testing. This position reports to the SPY-6 Production Array Program Manager and leads the execution efforts of the recurring production sell-off.  This lead will be responsible for ensuring that equipment delivery commitments are made on time and within budget, focusing on Array Build Integration & Testing, and RHS assembly builds, including Mechanical Structures & RMA Chassis material. They are responsible for removing barriers and defining solutions that support the Production IPT and program.

In addition, it is expected this person will work across all Raytheon functional organizations to staff the Production IPT and ensure the timely start-up and delivery of products in accordance with the contract(s).  

This is an onsite position located at either our Andover or Tewksbury, MA facilities.

What You Will Do

• Establish and maintain a positive culture to which top talent is attracted.

• Provide leadership and direction for the cross-functional supply chain, operations, engineering, quality, test, and logistics teams in the Production IPT with an emphasis on mitigating technical risk, assuring continuous Array production and delivery of compliant hardware to the Navy.

• Collaborate with SPY-6 Chief Engineer to provide technical oversight of Array scope to include reviews of TDP changes, planning and execution of Array Production Test & FAIs.

• Lead MLAs/RFVs/MRBs for Array build and integration issues.

• Accountability for the production scope, including aligning product EACs with SOW definition, contract values and Program Management.

• Work with Customer counterparts to understand status, schedules, priorities and objectives for events.

• Participate in management of suppliers, in coordination with the supply chain function.

• Manage engineering staffing across the Production IPT.

• Developing presentations and presenting at program management reviews (PMRs), staffing reviews, and decision reviews to achieve contract commitments.

• Display strong communication, influence management, and presentation skills, and comfortably interact with both internal and external stakeholders at all levels of leadership.

• Support the program risk and opportunity process in accordance with specific financial goals and obligations.

• Travel to support supplier reviews and programmatic meetings.

What You Will Learn

• Raytheon and RTX Business Acumen.

• SBU & SSBU organizational structure, responsibilities amongst the programs and the functional areas, and deliverables.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience. 

• Prior IPTL experience.

• Experience with financial management/analysis tools.

• Prior experience on a low-rate initial production (LRIP) or full rate production program, preferably in the aerospace and defense industry.

• Experience presenting to internal Raytheon leadership, customers, partners, and/or subcontractors.

• Active and transferable Secret U.S. government issued security clearance is required prior to start date with the ability to obtain special program access prior to start. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Prior IPT lead experience with heavy interaction with Operations and Supply chain function.

• Experience working with production of SPY-6 Systems.

• Master’s Degree from an accredited university.

• Raytheon PM Certification Level 6 (or equivalent) or ability to obtain within a year.

• Demonstrated program execution experience managing program staffing, assignments and resources with cross-functional teams in an IPT organizational structure.

• Prior Functional leadership experience.

• Program execution experience under a firm fixed price contract structure.

• Demonstrated experience in leading a program or IPT over $50 million in annual sales.

• Experience working with Navy and/or International customers

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation

• Relocation Eligibility.

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Systems Engineering and Test Capabilities (SE&TC) is seeking a Section Leader for the System Integration and Test (SI&T) Integrated Systems Department. This department supports multiple programs including Patriot and NASAMS Systems.  As a Section Leader, the candidate will be expected to actively participate in Department level leadership team goals and initiatives, support department hiring and program staffing, provide employee feedback and mentoring, and be actively involved in daily program operations. This position provides an opportunity to grow your skillsets by contributing to the development of our workforce and creating and fostering a collaborative environment.

What You Will Do

• Lead a cross functional team of engineers

• Establish meaningful and measurable goals and communicate effectively with the team

• Oversee the direct line management activities for the section including communication, performance impact, career development, and talent acquisition

• Support department and discipline level initiatives

• Ensure employee compliance with company policies and procedures

• Oversight of personnel issue resolution

• Adhere to and ensure alignment to Raytheon Technologies Values and Behaviors

• Work as a technical lead or individual contributor; Section Leader duties account for approximately 10% of the employee’s time.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience

• Experience in system, software, and/or test.

Qualifications We Prefer

• Strong communication and interpersonal skills

• Experience with team leadership

• Experience with the Earned Value Management System (EVMS) or similar budget tracking system

• Experience with Raytheon’s Proposal Capture Process (development of Basis of Estimates, etc)

• Experience with the Estimate at Complete (EAC) process

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon’s Land Air Defense Systems (LADS) Engineering Execution Department is seeking a skilled and motivated Cross Product Team Lead (CPTL) to support a large Patriot missile program. The CPTL is responsible for various engineering activities, including defining early integration in cooperation with the project development teams, directing CPT engineers, supporting the planning for requirements sell off, planning, execution, and analysis for system integration and verification, in hardware-in-the-loop facilities, ground and flight tests. Activities require the ability to support alternate shifts and/or extended hours and require travel. This position is onsite based in Andover, MA.

What You Will Do

• Responsible for cost, schedule and execution for Missile systems integration, verification and validation scope across a program.
• Lead a small team of engineers with planning and execution of integration and test activities for missile sub-assemblies.
• Working with systems engineers to define knowledge points ensuring risk burn-down throughout the development process.
• Mentor junior engineers with establishing methodical and disciplined processes for planning and execution of integration and test activities.
• Prepare documentation such as test plans, procedures, integration information sheets, test cases, and reports.
• Analyze data to identify and resolve system performance issues and complete requirement verification.
• Compile, summarize, and present data analysis to internal and external stakeholders, including program leadership and external customers.
• Collaborate across engineering functions to drive performance and resolve issues. Includes working closely with operations and manufacturing teams.
• Brief Program Management and USG customer on plans and status
• Travel as required to meet programmatic objectives. Regular travel between multiple Raytheon locations in Massachusetts is required. Occasional domestic and potential international travel.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience.
• Experience developing program baselines, managing cost, schedule and quality for technical projects.
• Experience leading/contributing to proposals, such as creating BOEs or contributing to leadership proposal reviews.

• Active and transferable U.S. government issued SECRET security clearance is required prior to start date. U.S. citizenship is required as only U.S. Citizens are eligible for a clearance.

Qualifications We Prefer

• Experience with system integration, verification and test of complex missile systems.
• Experience with planning and conducting integration and test events such as flight test missions.
• Earned Value Certification.
• Test Architect Certification.
• Ability to collaborate with other engineering disciplines, Quality, Reliability, and program management.
• Strong communication and leadership skills for coordinating across internal and external stakeholders.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligibility– Relocation assistance is available.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

• MA Locations: Raytheon Andover, MA Location

• We Are RTX

#LI-Onsite

#LI-HS30

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Systems Engineering & Test Capabilities team discipline is seeking a Senior Systems Engineer to support integration and test activities for NASAMS (surface to air defense system) programs. In this role you will collaborate internally across functions and externally with our industry partners and U.S. Government customers to plan, prepare and execute Product Acceptance Testing and System Demonstration of the NASAMS Fire Unit.  This position reports into the overall NASAMS SI&T Cross Product Team Lead.

What You Will Do:

• Support the test architect in the integration and test strategy development and implementation to include metric collection and tracking.

• Support the development and review of test plans and test procedures.

• Support the planning, preparations, and conduct and product acceptance, system demonstration, and System Integration and Checkout (SICO) events.

• Identify and coordinate resources required for execution of demonstration and test events.

• Responsible for providing technical assistance to the program SI&T CPT lead to include development of technical briefings for program and engineering leadership.

• International travel up to 20%. Regular travel between Raytheon locations in Massachusetts and Southern New Hampshire is required.

Qualifications You Must Have:

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics. (STEM) and a minimum of 5 years of prior relevant experience.

• Experience with the systems, software, operation, integration, and/or test.

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date with the ability to obtain a Final Secret U.S. government issued security clearance after start.

Qualifications We Prefer :

• Experience with DOORS

• Experience with the integration and test of Air Defense Systems

• Experience with creating test scripts, and/or conducting performance analysis.

• Experience with Microsoft applications.

• Effective written and verbal communication, customer focus, collaboration, and multitasking skills.

• Active and transferable U.S. government issued security clearance.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Welcome to Raytheon in Andover, MA

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Job Summary:

The RF Microelectronics/Module Design & Foundry Services Department at Raytheon in Andover, MA, is currently seeking a Principal Electro-Mechanical Engineer to develop leading-edge miniaturized 3DHI sensors and systems to enable future generation technologies across Raytheon.

The successful candidate will be a highly motivated “self-starter” who will apply strong mechanical and electrical engineering skills to implement innovative solutions to challenging design criteria. They will be involved in research efforts including initial concepts, advanced technology demonstrations, and will have the opportunity to follow product development from beginning to end, including documentation, fabrication, assembly, and test/delivery of a range of microelectronics products. This position requires strong interpersonal, written, and verbal communication skills to maintain positive relationships & satisfaction with Program leadership (Engineering and Program Management). Knowledge of semiconductor manufacturing processes and materials and prior experience working with contract manufacturers (OSATs) is highly desired.

The role requires knowledge of high-density microelectronic packaging designs including Interposers, organic substrates, wafer and chip bumping and general knowledge in areas of electronic components/devices such as ASICs and FPGAs, design of electronic packaging chassis and structures, interconnects (connectors/cables), and thermal management design of high-density electronic systems and electronic enclosures. The successful candidate will have the ability to bring new and fresh ideas to the team, with opportunities to explore research and innovation areas in a collaborative and fun team environment. Additionally, the candidate is expected to follow established procedures in creation of technical data package work products, while working closely with program management and functional supervision to ensure the overall design objectives are met.

What You Will Do:

• Work with cross-functional hardware engineering teams to develop advanced microelectronics packages including 3DHI, 3D, and 2.5D (interposer + chiplets) and novel material and process solutions for RF, digital, mixed-signal, and photonics products
• Leverage industry-leading manufacturing and novel materials to achieve new levels of electro-mechanical performance and reliability

Qualifications You Must Have:

• Typically requires a Bachelor’s Degree in a Science, Technology, Engineering & Math (STEM) Field and a minimum of  Eight (8) or more years of relevant experience (An advanced STEM degree could count for 3 years of experience) with mechanical and electrical engineering design.
• Experience performing circuit layout design using 2D CAD tools
• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer:

• A Master’s degree or PhD. in a Science, Technology, Engineering & Math (STEM) Field 
• Experience in RF circuit design, including 3D EM simulation in HFSS or similar tools
• Circuit layout design experience using 2D and 3D CAD tools (Cadence Virtuoso and/or Allegro/APD+)
• Experience and familiarity with selection and oversight for semiconductor wafer  processing and finishing (plating, bumping, dicing)
• Design experience with 3D and 2.5D packaging, complex CAD/EDA software design workflows, and RF/Thermal/Digital co-design
• Experience qualifying and implementing cutting edge materials, fabrication techniques, and understanding of relevant materials used in semiconductor manufacturing and packaging
• Strong background in development, documentation, fabrication, assembly, and test/delivery of military/defense and/or commercial state-of-the-art electronic products
• Experience with designing electronics for extreme environmental requirements and design constraints
• Proficiency with 3D Mechanical CAD modeling and analysis tools (e.g., Solidworks, Creo).
• Experience in Geometric Dimensioning and Tolerance analysis for drawings
• Current DoD Secret level security clearance
• Innovative attitude to apply towards research and development of new technologies
• Excellent interpersonal and multi-tasking skills
• Excellent written and verbal communication skills
• Ability to work independently and in a team environment, including as a leader of small teams

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

We are seeking a motivated Senior Software Section Leader to join the Patriot Software Team within the Air and Missile Defense Software Department.  As a Section Leader, you will be responsible for the oversight of software personnel to meet program needs.   The ideal candidate is a well-disciplined individual with a proven applicable technical background, who is able to thrive in a dynamic agile environment and is able to work well in a team setting. 

What You Will Do

• Ensure that each employee has suitable work assignments and opportunities for growth and advancement
• Contribute to the technical oversight of employees in support of their daily work assignments
• Performance development and appraisal
• Salary and staffing planning
• Ensuring the adherence to company policies and the communication of company and program information
• Responsible for supporting a major program task within the Patriot domain
• This position requires exclusive onsite presence. 

Qualifications You Must Have

• Typically requires a bachelor’s in science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience. 
• Minimum of 2 years experience in functional management, leading a medium to large size team
• Lead and / or project management experience
• The ability to obtain and maintain an interim secret U.S. security clearance prior to the start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Active Secret security clearance. 

• Functional management experience (Managing performance, conducting reviews, mentoring, care and feeding of staff, hiring, etc).

• Cost / Schedule Management and Reporting experience

• Strong communication, interpersonal and decision-making skills

• Customer focus and collaboration skills

• Effective presence and influential leadership capability, with the ability to interact with senior levels of leadership effectively – including customer, Raytheon Technologies teammates and suppliers

• Proven experience with software development techniques and tools, including some, or all, of the following computer languages: C and Ada

• Experience in embedded systems, real-time systems, or large-scale applications. 

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

Relocation Eligible – Relocation assistance available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

This position is in Tewksbury, Massachusetts. Living in Massachusetts means you’ll have easy access to the ocean and locations of historical significance. You can enjoy varied outdoor activities ranging from hiking and camping to cross-country skiing and snowmobiling. Massachusetts is recognized as one of the best states to call “home.”

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Raytheon is seeking a well-qualified Principal System Security Engineer (Cyber Engineer) - P4 to join our elite Systems Security Engineering (SSE) team for the Systems Directorate in developing solutions to protect the Warfighter’s technology advantage. Systems Security Engineering creates holistic security solutions leveraging Cyber Security, Software Assurance and Supply Chain Risk Management to support Program Protection Implementation on embedded weapons systems. Join our highly visible team and perform technically challenging assignments, which will directly contribute to protecting our nation and our Warfighters. This is an onsite position at Raytheon.

What You Will Do

• Interact with the customer to define SSE requirements, solutions, trades, costs, implementation, system impacts, and effectiveness

• Develop plans and estimates, task execution, project tracking, reporting, and risk identification and mitigation plans

• Ensure compliance with National Institute of Standards and Technology (NIST) Risk Management Framework (RMF) controls

• Consult and assist program management with SSE architecture and issues

• Support the development of bids and proposals

• Define security development and test efforts implementation of security controls of networking devices, databases, operating systems, and hardware and software component

• Integrate cybersecurity development activities

• Develop top-level system requirements and flow down requirements and implementation concepts to subsystem

• Understanding, and compliance with, DoD technology release and export licensing policies

Qualifications You Must Have

• Typically requires a Bachelor’s Degree in Science, Technology, Engineering or Mathematics (STEM) and 8 years of prior relevant experience

• Active and transferable U.S. government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

• Experience in System Security Engineering and/or Cybersecurity Engineering

• Experience with NIST Risk Management Framework (RMF)

Qualifications We Prefer

• Managerial or leadership experience

• Usage of information security toolsets including anti-virus, Vulnerability Assessment, HIDS/ NIDS. host-based or endpoint security solutions, Multi-Factor Authentication (MFA), and Security Incident and Event Management (SIEM) and centralized auditing tools familiarity with splunk is preferred

• Linux Bash scripting or Python scripting experience

• Security systems engineering involving various computer hardware and software S/W operating system and application solutions in both a stand-alone and in LAN/WAN configurations

• DoDI 8570.01-M IAT Level-II Compliant Certification (e.g. Security+, CISSP, or equivalent)

• Security features and/or vulnerability analysis of various operating systems as defined by Intelligence agencies

• Experience with IT and/or network and system security administration, including operating system security configuration and account management best practices for UNIX, MS Windows, Red Hat Enterprise Linux, and CISCO systems

• Understanding of Systems Engineering requirements, specifications, and Experience implementing DoD and Federal IA Certification and Accreditation Processes, IA controls and developing and maintaining associated certification and accreditation documentation

• Familiar with Program Protection Plan (PPP) required by DoDI 5000.02 and DoDI 5200.39

• Experience working on U.S. Government contract proposals as an Information Assurance Engineer subject matter expert

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation

• Relocation Eligible – Relocation assistance is available

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Systems Engineering and Test Capabilities (SE&TC) Surface Radars & Sensors Center is seeking a Chief Product Owner (CPO) to lead the overall vision, strategy, and coordination of the C5I business area operating within the organization’s agile, multi-team environments. In this role, you will lead a team of product owners, align product goals with business strategy, and resolve dependencies, ensuring coordinated execution across the C5I programs scope.

What You Will Do

• Lead a matrixed engineering team, fostering collaboration across disciplines to meet program objectives and exceed customer expectations.

• Partner with the program leadership team to define and implement the "Definition of Done," ensuring quality and consistency throughout the product lifecycle.

• Serve as the primary interface with internal stakeholders, aligning technical execution with programmatic and business goals.

• Define, communicate, and implement the product vision and strategy to meet product line objectives.

• Oversee AGILE processes across SCRUM Teams, including Program Increment (PI) Planning, Scaled Daily Meetings, Tech Times, and Team Demos.

• Create and maintain a prioritized product backlog to ensure efficient execution of project goals.

• Support the program leadership team in providing innovative solutions to challenging problems for U.S. customers.

• Lead customer-facing demonstrations of the C5I system to potential new customers, contributing to the growth of the product line.

• This position is on site in Tewksbury, MA.

Qualifications You Must Have

• Typically requires Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience.

• Experience leading cross-functional teams and complex engineering projects.

• Experience working in an Agile environment and/or on Agile development projects.

• Experience in overseeing and/or monitoring technical cost and schedule performance.

Qualifications We Prefer

• Experience with software product development, networking, computing platforms, cybersecurity compliance (e.g., Link16, MIL-STD-6016).

• Six Sigma, CORE, Earned Value Management System (EVMS), Software Project Management Certification and/or PMX certification.

• Prior experience with the C5I product line or other DOD programs.

• Ability to understand command and control and/or radar technology in the areas of software design, integration and test.

• Proven experience in large, complex defense systems.

• Strong communication and leadership skills to effectively drive a shared vision across stakeholders and teams.

• Strategic thinking with a deep understanding of business and customer needs.

• Proven ability to resolve dependencies, mitigate risks, and deliver results in a fast-paced environment.

• Proven experience in large, complex defense systems.

• Experience with AI tools and applications to Systems Engineering.

• Experience with Model Based Systems Engineering (MBSE) and associated tools (i.e. Cameo).

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligibility– Relocation assistance available

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Manufacturing Engineers develop and improve manufacturing processes by studying products and manufacturing methods. They provide premier engineering and manufacturing support expertise to enable on-time, lowest-cost hardware delivery with performance and reliability that exceeds customer expectations. They execute across all phases of a program including proposal capture, process development, transition to production, and production support. Manufacturing Engineers design, control, and improve the manufacturing process and system design through a collaborative effort with the value stream team. You would apply your skills to implement improvements that reduce cycle time and cost and improve productivity, while maintaining a high level of safety in the manufacturing environment and quality within the product.

What You Will Do

• Develop, maintain, and review Manufacturing Data Packages (MDPs) including assembly instructions, workflow/routing, labor standards, tool and fixture designs

• Support a manufacturing area as part of cross-functional team by guiding the production team through process troubleshooting and incorporation of engineering changes into the MDP

• Disposition non-conforming material with root cause and corrective action analysis as required

• Drive Continuous Improvement through process improvements to improve cycle time, reduce ergonomic risk to assemblers, automate, reduce costs (both direct and indirect) using CORE principles and data driven decision making

• Provide real-time technical support to manufacturers and fabricators; in-house as well as the supply base.

Qualifications You Must Have

• Typically requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and a minimum 2 years of prior relevant experience. 

• 1+ year of working in a manufacturing environment

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Proficiency with CAD solid modeling tools (preference for CREO/ProE) and/or simulation tools

• Experience with designing, programming, maintaining, and troubleshooting automated tooling and machinery

• Experience with military and industry standards

• Familiarity with standard material handling practices, especially as they pertain to Electrostatic Discharge mitigation requirements

• Active DoD security clearance

• Proficient use of Microsoft Office suite (Excel, Powerpoint, Project, Word, etc…)

• Proven written and oral communication skills, including presentation skills

• Self-motivated and results oriented individual with an ability to work in a team environment and with minimal direct supervision

• Demonstrated hands-on mechanical aptitude with the ability to work across disciplines

• Innovative mindset that drives continuous improvement and keeps pace with advances in technology

• Excellent organizational skills with fine attention to detail and an ability to manage multiple tasks simultaneously

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is not available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Are you ready to join a dynamic, comprehensive, and growing professional organization? The Systems Engineering (SE) Long Range Radars (LRR) department is seeking a Senior Systems Engineer to contribute to concept development, architectural design, requirements generation and flow-down, modeling and simulation, systems analysis, integration, testing, and evaluation of world-class Missile Defense and Sensor Systems. In this role, you will lead the technical development and sustainment of the Qatar Air Operations Defense System (AODS) platform infrastructure.

The AODS platform consists of Commercial Off-The-Shelf (COTS) servers, appliances, and networking equipment, operating in a dynamic environment with constantly evolving priorities. Every day presents a new set of challenges. Whether it’s hardware, software, networking, or a combination of all three, you’ll be challenged to learn how our systems work and identify the sources of new and unexpected issues through troubleshooting and data analysis.

We value various skills and experience, so don't hold back. Your qualifications could add tremendous value to our team. Our customers come from all different backgrounds, and so do our employees. If you're passionate about what you could accomplish here, we'd love to hear from you!

What You Will Do

In this role, you will collaborate across disciplines and partner with Scrum teams to implement solutions, gaining exposure to every aspect of the system while directly contributing to its success. Key responsibilities include:

• Leading system-level operations center sustainment, execution, and reporting.

• Troubleshooting hardware and software issues to maintain site operations and ensure system reliability.

• Developing and upgrading platform capabilities, including operating systems, networking, and cybersecurity components.

• Interfacing with and reporting to U.S. Government customers and Program Leadership on system development and operational status.

• Preparing integration and implementation documentation, such as plans, procedures, and reports.

• Providing reach-back support to teams supporting the operational system in-country.

• Analyzing data from operations center hardware, software, and simulations to identify and resolve issues.

• Utilizing data analysis results to support root cause identification and resolution.

• Collaborating across multi-disciplinary engineering functions to drive performance, improve system functionality, and resolve technical challenges.

• This position will be on site in Tewksbury, MA.

Qualifications You Must Have

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of 5 years of prior relevant experience.

• Experience with IT, networking, and/or system administration, including: Command and Control (C2) system hardware (e.g., servers, switches, routers), Virtual Desktop Infrastructure (VDI), Virtual Machines/Containers, SQL databases, Active Directory (Windows/Linux), and/or VMware systems.

• Experience conducting technical analysis such as data analysis, troubleshooting, and/or identifying root causes.

• Experience with virtual and hyper converged platforms.

Qualifications We Prefer

• Strong ability to clearly articulate technical concepts, both verbally and in writing.

• Proven interpersonal skills for collaboration across multidisciplinary teams.

• Adaptability to dynamic, fast-paced environments with a focus on innovative solutions.

• Experience with the Systems Engineering process, including design, development, and evaluation.

• Proven ability to develop, document, and maintain processes, methods, and tools for technical execution and sustainment.

• Experience interfacing with customers to deliver technical solutions to complex problems.

• Hands-on expertise in network configuration and troubleshooting.

• Knowledge of air defense programs and large, complex systems.

• Familiarity with command and control systems involving sensors and effectors.

• Experience with Link-16 networking and interfaces.

• Proficiency in scripting languages like Python, Ruby, or PowerShell.

• Knowledge of Microsoft Active Directory, Group Policy Objects, and identity management best practices.

• A Master's degree in Engineering, Science, Mathematics, or a related discipline is preferred.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligibility– Relocation assistance available

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon is currently seeking a Senior Test Equipment Design Engineer to join the Sensor Test Solutions (STS) Department. This is an excellent position for engineers with a background in electrical design and software programming/automation, along with a desire to apply those skills to developing, building, and integrating advanced test platforms and architectures.  

You will be joining a project team responsible for the development of test solutions and architectures for various programs within Raytheon. Typical test development applications include analog/digital, RF, High Power, and embedded software/firmware design activities. Test architectures include a blend of customized and COTS Automatic Test Equipment (ATE), along with custom electro-mechanical holding fixtures and associated interface cabling and harnessing.

Engineers in this role will also have exposure to the full lifecycle development process - from the requirements definition phase of the test solution design process through the verification and final system sell-off in a production facility or field/depot environment.

This role is 100% ONSITE in Tewksbury, MA

What You Will Do

• Develop test hardware, software, and/or firmware, from requirements definition through deployment at manufacturing or customer facilities. These test capabilities may span multiple disciplines (Power, RF, Analog, Digital)

• Lead smaller teams of engineers, overseeing the technical execution of project tasks as well as reporting of project status (cost and schedule) to STS department leadership

• Actively identify test readiness issues and optimizations throughout the development lifecycle

• Understand and meet established project budget, schedule, and performance commitments

• Guide mechanical engineering and/or suppliers through test adapter design activities, with moderate support from senior engineers

• Work effectively within a team, or function as an individual contributor as needed, working autonomously with limited supervision

• Engage in personal technical growth

• Prepare and clearly present your work product at project status meetings

• Support Manufacturing operations, including on-site troubleshooting and debugging

Qualifications You Must Have

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM)

• Minimum of five (5) years of relevant engineering experience

• Experience in electrical engineering design and/or software automation concepts and applications

• US Citizen - Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​​

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date

Qualifications We Prefer

• Degree in Electrical Engineering or demonstrated experience with electrical engineering design concepts

• Minimum 5 years of related experience excluding internships

• Experience leading technical tasks and small to mid-sized project teams

• Exposure to project management tools such as MS Project, Jira/Confluence, and Earned Value Management System (EVMS) tracking software

• Experience with National Instruments’ TestStand, LabWindows/CVI, and/or LabVIEW

• Experience with Digital, Analog, RF, and/or Power Supply test hardware and/or software design

• Experience with the routine use and/or automation of commercial test and measurement equipment, i.e. Oscilloscopes, DMMs, network analyzers, power supplies, etc.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligibility

Learn More & Apply Now!

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information - part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

  The salary range for this role is 82,000 USD - 164,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

  RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

  Privacy Policy and Terms:

  Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Air Defense Ground Equipment (ADGE) Department leads mechanical design, development, and integration of platform systems. This includes shelter systems, hardware integration, cable & interconnections, as well as facility development, and site integration. The department is comprised of individuals with technical expertise and experience in hardware design, integration, and production support. 

The ADGE department is looking for a full-time Sr. Principal Mechanical Engineer to support Patriot Missile Change Control Board (CCB) for major components and sub-assemblies, including obsolescence upgrades, procurement and supplier support

What You Will Do

• Responsibilities (Core & Day to Day) Support design specification development through production qualification reviews and release including ensuring design is manufacturable
• Participate in design peer reviews and conduct trade studies to promote sound technical decisions.
• Provide responses to supplier questions related to general design expectations and interpretation of the relevant specifications​.
• Provide guidance on Raytheon expectations for design rigor, level of TDP & MDP documentation required, typical analysis approach, and other similar topics.
• Connect suppliers with Raytheon subject matter experts as required.
• Collaborate with other engineering disciplines, non-technical disciplines, and suppliers to develop robust design solutions and resolve technical challenges.
• Work with limited supervision and meet technical, schedule, and monetary commitments.
• Apply knowledge and experience in technical problem solving and hardware development in an engaged team environment.
• Drawing generation, drawing release, and drawing change incorporation

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 10 years of prior relevant experience unless prohibited by local laws/regulation. Or An Advanced Degree in a related field and minimum 7 years experience
• Experience with ERB/CCB process; CCB chair certification or ability to be certified.
• Experience with solid modeling, creating and documenting mechanical designs in Pro/Engineer/CREO or similar modeling tools.
• Experience working within small electromechanical or gyroscope similar assembly/products.
• Experience with Geometric Dimensioning and Tolerancing (GD&T) and ASME drawing and documentation standards and procedures

Qualifications We Prefer

• Experience with materials, load bearing structures, shock/vibration/load analysis
• Experience using Computer Aided Design (CAD) tools
• Missile portfolio including reviewing trade studies, identification of suitable alternate and interchangeable materials, or design changes as needed
• Ensure technical integrity and engineering execution across the IPTs and other functions to meet cost, schedule, and technical requirements

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Job Summary:

An exciting opportunity exists for a Sr. Principal RF Module Design/Development Engineer to join our Module Development Section with the Advanced Microelectronics Solutions (AMS) Department as a technical lead. The AMS department designs, fabricates, and tests state-of-the-art Monolithic Microwave Integrated Circuits (MMICs) in our on-site foundry. These chips are designed into custom modules to support multiple programs and enhance the capabilities of next generation radar systems.

The successful candidate will be responsible for leading the technical design and development of RF/microwave modules containing GaAs- and GaN-based monolithic microwave integrated circuit (MMIC) products. This would be in active support of existing technologies in production as well as next generation products in development. This position requires a strong academic background and experience in RF/Microwave Design, Development, Integration & Test.

What You Will Do:

• Designing RF structures and transitions on multi-layer, multi-channel RF Modules and analog circuitry enabling both receive and transmit behavior

• Consulting across RF module design, MMIC design and assembly teams

• Troubleshooting RF Modules that are prototyped and under development

Qualifications You Must Have:

• Typically requires a Bachelor’s Degree in a Science, Technology, Engineering & Math (STEM) Field and Ten (10) or more years of relevant experience (An advanced STEM degree could count for 3 years of experience) with Microwave/RF module, subsystem and component analysis, design, and test

• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer:

• A Master’s degree or PhD. in a Science, Technology, Engineering & Math (STEM) Field 

• Experience leading teams and/or projects

• Experience in module/sub-system assembly & packaging process

• Experience in thermal modeling and analysis.

• Experience of different topology trade-offs, process and active/passive component selection, system/sub-system level, gain-loss analysis and flowing down requirements from the system to the component level

• Hands-on experience with electromagnetic simulation tools such as HFSS, ADS, CST.

• Layout experience in Mentor Graphics’ Xpedition, Cadence Virtuoso or AutoCAD

• Experience with analytical tools such as Matlab, Python, or JMP

• Experience in cost estimating, budget and schedule management

• Understanding of allocating and flowing down requirements from the system to the component level

• Experience in a production environment

• Experience with microwave testing techniques, including using spectrum analyzers, Real-time Spectrum Analyzers (RSAs), Vector Network Analyzers (VNAs) and Performance Network Analyzer (PNAs)

• Experience with GaAs and/or GaN MMIC devices       

• Current DoD Secret level security clearance

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Job Summary:

An exciting opportunity exists for an experienced Principal MMIC and Module Design Engineer to join Raytheon’s RF Microelectronics/Module Design & Foundry Services department in Andover, MA. This department develops, designs, and manufactures compound semiconductor devices, microwave/millimeter-wave integrated circuits, and modules for defense applications. The successful candidate will develop state-of-the-art MMIC and module products that support air and missile defense systems and radars. Using advanced semiconductor and module technologies, they will be responsible for the complete product cycle of the MMIC, including concept, design, layout, test, evaluation, and interfacing with the customer.

What You Will Do:

• Develop insights that extend your knowledge in the MMIC design field and form the basis of new concepts, theories, and products
• Design RF structures and transitions on multi-layer, multi-channel RF Modules and analog circuitry enabling both receive and transmit behavior
• Consult across MMIC design, module design, test and assembly teams
• Act independently to troubleshoot, and uncover and resolve issues
• Research and develop new technology that results in new product/business opportunities for Raytheon
• Serve as a technical resource and represent the Department as a technical contact to Raytheon and external customers

Qualifications You Must Have:

• Typically requires a Bachelor’s Degree in Science, Technology, Engineering, or Mathematics (STEM) and 8+ years of relevant work experience with RF/microwave/mm-wave MMIC design, module/subsystem design and test. An advanced STEM degree can count in lieu of some experience)
• Experience with Circuit Simulation tool ADS and in EM tools such as HFSS, Momentum
• Experience designing RF/Microwave MMIC circuits and modules
• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance

Qualifications We Value:

• Master’s or Doctoral Degree in Electrical Engineering or related engineering curriculum
• Broad background in theory and techniques of microwave/mm-wave circuits, design, and test
• Experience in thermal modeling and analysis.
• Experience of different topology trade-offs, process and active/passive component selection, system/sub-system level, gain-loss analysis and flowing down requirements from the system to the component level
• Layout experience in Mentor Graphics’ Xpedition, Cadence Virtuoso or AutoCAD
• Experience with analytical tools such as Matlab, Python, or JMP
• Experience with microwave testing techniques, including using spectrum analyzers, Real-time Spectrum Analyzers (RSAs), Vector Network Analyzers (VNAs) and Performance Network Analyzer (PNAs)
• Experience with GaAs and/or GaN MMIC devices       
• Current DoD Secret level security clearance

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Job Summary:

An exciting opportunity exists at Raytheon for a Semiconductor Dry Etch Engineering Lead to join our III-V compound semiconductor foundry team fabricating gallium nitride and gallium arsenide-based devices within the Advanced Microelectronics Solutions (AMS) Department.  This role requires a broad understanding of microelectronics processing and subject matter expertise in one or more dry etch related techniques including plasma ashing/descum, reactive ion etching (RIE), and inductively coupled etching (ICP).

As a member of the AMS Department, the individual in this role will serve as the dry etch processes lead engineer and collaborate with the various engineering work centers in the III-V semiconductor wafer foundry. The candidate will lead and assist projects in process sustainment, capital allocation, directing process and capital qualifications, improving cycle time, improving product yield, developing new data driven controls, and driving overall wafer movement efficiency.

The chosen candidate is expected to be an innovative and creative thinker capable of probing issues and reaching solutions both independently and in a team environment. The ideal candidate will have working knowledge of various microelectronics processing techniques beyond deposition, including wet and dry etching, lift-off techniques, photolithography, metrology, process characterization, foundry data integrity, and large data analysis methods.

The candidate is expected to work well in large and small, cross-functional teams, understand foundry processes, determine capacity limitations, improve overall equipment effectiveness, identify yield improvement opportunities, gather sponsorship and team resources, and execute on continuous improvement activities. Presence on the foundry floor is essential for quick resolution of technical issues as well as the ability to work with operations, facilities, equipment, and quality teams. The role requires a large degree of multitasking with attention to detail while managing priorities depending on the nature of the problems and the commitments.

This role will be 100% on-site and based in Andover, MA.

What You Will Do:

• Sustainment of current dry etch production processes and involvement with development of new process
• Set and report center priorities at the 8am foundry tier meeting
• Identify process improvement opportunities
• Lead 8Ds and RCCAs
• Create, document, maintain and approve work instructions
• Assist process engineers in training users and operators on semiconductor processes and equipment
• Manipulate large datasets and use statistical analysis to define SPC controls, manage projects, and assign risk
• Develop and report on actionable deposition work center health metrics
• Identify capital needs, collaborate with tool vendors, assist in tool acceptance, and create plans/schedules for tool and process qualifications
• Frequently work on the foundry floor and interact with various process engineering, equipment engineering, digital technologies, quality, facilities, and operation teams

Qualifications You Must Have:

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience in semiconductor processing techniques including photolithography, dielectric deposition, metals evaporation, and optical or scanning electron microscope inspections
• The ability to obtain and maintain a US security clearance. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer:

• Knowledge of dry etch tools, tool health monitoring, uniformity controls, SECS/GEM experience, and proficient in statistical process control
• Excellent communication skills to effectively transfer ideas
• Broad knowledge related to semiconductor processing, device physics, and data analysis
• Experience troubleshooting a wide range set of fabrication equipment in addition to establishing equipment qualification and preventative maintenance procedures
• Experience in a data analysis software packages (e.g. MATLAB, Python, SQL, JMP)
• Ability to lead and coordinate technical projects with cross-functional teams
• Experience with characterizing, understanding, and improving semiconductor device performance and reliability

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms