Engineering Jobs in Ross Ohio

What will you do?

Takes any necessary actions to make sure that a product or service will satisfy customer requirements and is the driving force in implementing continuous quality improvement.

SCOPE: (For their Production Sectors)

• The Quality Excellence of the Offers delivered to the customers
• The Quality Excellence of Supply Chain (from Supplier to Customers)
• The timely and effectively management of customer containment actions (Business Risk Escalation, Offer Safety Alerts…)

Main activities

• In charge of the Quality of one or several sectors
• Ensure that the Process Control Plan is applied and consistent with Failure Mode Effect Analysis (FMEA)
• Challenge supervisors to identify and manage risks in a preventive mode
• Be the local expert of the traceability system for the manufacturing floor.
• Lead Process Audits and Process FMEAs
• Create and maintain quality control documentation, insure related training and application in the sector
• Lead continuous improvement on its perimeter
• Lead containment actions, root cause analysis of quality issue and problem solving on his sector
• Be a member of the Short Interval Management (of the production lines)
• Provide solutions to increase Customer Satisfaction
• Provide inputs and challenge about quality for new evolution, contribute to process/control capability implementation.
• Be the local expert of the assembled products in his sector

What qualifications will make you successful?

• Minimum previous experience, in the functions described, of three years or less
• Mandatory good level of English.
• Bachelor of Science in Engineering (Mechanical, Industrial, Electrical, Electronic)
• 3 + years experience with manufacturing quality, manufacturing engineering, or equivalent
• Experience with 8D problem solving methodology, tool utilization (i.e. 5Why, fishbone (cause and effect), etc.)
• Six Sigma knowledge, experience, certification highly desired
• Experience on ESD desired

CMM Programmer

Springdale, OH

Onsite

Full Time

Responsibilities:

The Process Engineer will be responsible for programming Coordinate Measuring Machines (CMM) to support the manufacturing efforts. The CMM programming will be done using PC DMIS software. The role will include writing, editing, troubleshooting, and validating CMM programs to be used for measurement of jet engine components. The Process Engineer develops, enhances, and troubleshoots CMM programs for dimensional inspection of manufactured aerospace products. The Process Engineer must be able to read and interpret drawings and prints using Geometric Dimensioning and Tolerancing (GD&T) principals.

Duties and Responsibilities:

• Develop CMM programs using PC DMIS software, an advanced level of PC DMIS offline programming is expected.
• Read and understand prints/drawings and have an advanced knowledge of GD&T.
• Develop planning, processes, and work instructions
• Troubleshoot & prove-out CMM/ PC DMIS programs, direct GR&R validations, and validate work using multiple techniques
• Develop CAD based CMM inspection programs using both models and prints
• Work autonomously as well as collaboratively in identifying needs and validation plans. Providing proactive support to meet manufacturing requirements
• Follow system standards to development, implementation, and change management of metrology processes

Qualifications / Requirements:

• US citizenship required
• Approximately 20% travel time
• Advanced knowledge/experience programming CMM’s using PC DMIS software with scanning, offline programming, and complex geometry.
• Advanced knowledge/experience programming CMM’s using PC DMIS software with an emphasis on precision, repeatability and reproducibility
• Strong experience using, programming, troubleshooting, and editing PC DMIS programs.
• Experience using 5-axis REVO probe systems.
• Strong knowledge of GD&T and how to apply GD&T to inspection routines to satisfy print dimensions
• Strong mathematical, analytical, writing, and communication skills
• Knowledge and experience with CAD-based inspection using PC DMIS
• Strong collaboration & presentation skills to gain buy-in & effectively communicate program/process implementations and changes to the organization

Desired Characteristics:

• Programming or scripting experience (C++, C Sharp, Python, etc.)
• Self-starter – quick learner & able to identify alternative solutions for optimum results
• Experience in application of structured problem solving in continuous improvement

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Our client engineers and manufactures custom material handling solutions supporting the automotive, aerospace, finishing, storage & retrieval, and other heavy manufacturing industries and they are seeking a hands-on, detail-oriented Project Manager to join their team!

Responsibilities

• Lead projects from purchase order to customer acceptance.
• Responsible for leading a team in the production of bill of materials, installation drawings, detail drawings, and documentation for assigned jobs.
• Serve as a liaison between engineering and manufacturing.
• Maintain project schedule by monitoring project progress, coordinating activities, and resolving problems.
• Assist with installation and provide engineering supervision at customer's facilities.

Qualifications

• 5+ years of engineering design experience
• 3+ years project management experience
• CAD experience - AutoCAD, Inventor ME, MET, or equivalent

Required Skills

• PMP certificate
• ERP knowledge (NetSuite or similar)
• Material handling equipment experience or Industrial, Construction, Manufacturing experience
• Metal fabrication knowledge /experience (Laser cutting, press brake, welding)
• CNC knowledge (Lathe, Mill)
• FEA knowledge (NASTRAN, ANSYS, or similar)