Jobs in Richardson
910 positions found — Page 36
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
The SMT Process Engineer IV is a senior-level technical expert responsible for optimizing and maintaining surface mount technology (SMT) processes to ensure high-quality, efficient, and cost-effective electronic assembly. This role involves advanced troubleshooting, process development, and continuous improvement initiatives across multiple SMT lines, often acting as a lead or mentor within the engineering team.
Job Responsibilities
- Lead the development, implementation, and optimization of complex SMT processes, including stencil printing, pick-and-place FUJI, reflow soldering, and automated optical inspection (AOI).
- Conduct advanced root cause analysis and implement corrective actions for SMT process defects (e.g., shorts, opens, voids, component placement issues) using statistical process control (SPC) and other analytical tools.
- Design and execute experiments (DOE) to improve SMT process robustness, yield, and throughput, focusing on new product introduction (NPI) and existing product enhancements.
- Collaborate with design engineering, manufacturing, and quality teams to ensure manufacturability (DFM) and resolve complex technical issues related to SMT assembly.
- Develop and maintain comprehensive process documentation, work instructions, and training materials for SMT operators and technicians.
- Evaluate and recommend new SMT equipment, materials, and technologies to enhance capabilities and improve manufacturing efficiency.
- Provide technical mentorship and guidance to junior engineers and manufacturing personnel on SMT best practices and problem-solving techniques.
- Drive continuous improvement projects using Lean manufacturing and Six Sigma methodologies to reduce waste and increase productivity within SMT operations.
- Monitor key performance indicators (KPIs) for SMT processes and present findings and recommendations to management.
- Ensure compliance with all relevant industry standards, safety regulations, and quality management systems (e.g., ISO, IPC).
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8+ years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Expert-level knowledge of SMT equipment (e.g., printers, pick-and-place machines, reflow ovens, AOI/SPI) from various manufacturers (e.g., Fuji, Universal, Koh Young, Agilent).
- Deep understanding of IPC-A-610 and J-STD-001 standards.
- Proficiency in statistical process control (SPC), design of experiments (DOE), and advanced problem-solving methodologies (e.g., 8D, Six Sigma).
- Strong analytical skills with the ability to interpret complex data and make data-driven decisions.
- Demonstrated ability to lead technical projects and drive process improvements.
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and mentor others.
- Experience with CAD/CAM software for SMT programming and DFM analysis is a plus.
- Ability to work effectively in a fast-paced, dynamic manufacturing environment.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Manage all planning activities for the dedicated assigned workcell and mentor the Production Planners and Document Coordinators in the workcell.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Ensure 100% on-time delivery.
- Establish build readiness.
- Maintain efficiency of capacity and customer sizing.
- Maintain accurate revenue forecasting.
- Maintain material control and liability.
- Develop Master Production Schedule (MPS) and load into Jabil’s ERP system, including Purchase Order (PO) coverage.
- Reconcile the MPS to customer PO coverage weekly to ensure that Jabil is not exposed over and above customer PO coverage or other authorized customer demand.
- Ensure the MPS is always 100% accurate and achievable.
- Achieve and maintain 95% MPS goal.
- Own production planning, BOM and document control with or without additional support.
- Analyze material and capacity requirements and communicate constraints to the Workcell and customer based on accurate customer demand.
- Maintain the workcell’s capacity planning model; drive resolution on uneven capacity utilization that keeps Jabil focused on the customer but efficiently utilizing manufacturing resources.
- Meet daily with the Workcell and manufacturing team to assess production schedules, (adjust as necessary based on production results) optimize run quantities, and minimize changeovers to help achieve 100% on time delivery.
- Maintain the customers’ latest contract on file at all times and be familiar with the terms and conditions of the contract regarding customer liability of material planning and production scheduling. This includes the liability window for Jabil material purchase order placement, purchase price for components, and liability for any in-house materials (purchased and manufactured).
- Be the workcell’s “expert” on all planning activities by supporting the Production Planner goal of never starting to build product without having a valid PO, adequate material quantities, and accurate BOM and an accurate routing.
- Lead the Workcell on the creation of Bills of Material (BOMs) and routings that allows accurate tracking of WIP assemblies and accurate inventory movement transactions.
- End-of Life (EOL) management should include chairing a meeting 30 days prior to the last planned build date to create tactics to support the EOL strategy. The Master Planner would own the build schedule, corrections and resolution of MPS to customer demand, planned tactics on deadlines for assemblies out of the various work areas on the floor, deadline for last shipment, and support plan for potential RMAs.
- Manage Jabil purge process for internal Workcell purges.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
EDUCATION & EXPERIENCE REQUIREMENTS
- Bachelor’s degree + 5 years of experience, or Masters + 3 years of related experience, or PhD without experience.
- APICS certification and Supervisor experience also preferred.
- Thorough knowledge of MRP, lead times for specific component types, internal run rates, test development lead times, machine programming lead times and complete understanding of the chronological sequence of events that must occur in order to build a product.
- Or an equivalent combination of education, training, or experience.
Responsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday - Friday 6:00 a.m. - 2:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.
· Exhibit proficiency in the use of electronic test and measurement equipment.
· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM’s, EC documents, Visuals, Debug, Testing tools and procedures.
· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.
· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.
· Work as a team member to achieve Diagnostic department’s process yield goals.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
What You’ll Do
- Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.
- Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).
- Optimize production layouts, workflows, and capacity to support throughput, cost, and quality targets.
- Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.
- Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.
- Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.
- Partner cross‑functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.
What You Bring
- Bachelor’s degree in engineering or related field, plus 5-8 years’ related experience and 2-3 years in a management role required, or equivalent combination of education and experience.
- Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.
- Strong foundation in industrial engineering principles, facilities management, and continuous improvement methodologies.
- Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.
- Analytical, data‑driven decision maker with awareness of cost drivers, ROI, and financial impact of engineering initiatives.
- Effective communicator and collaborator with a hands‑on leadership style.
SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements. Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer. Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility. Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly. TECHNICAL MANAGEMENT RESPONSIBILITIES · Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time. WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
JOB SUMMARY
Manage all planning activities for the dedicated assigned workcell and mentor the Production Planners and Document Coordinators in the workcell.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Ensure 100% on-time delivery.
- Establish build readiness.
- Maintain efficiency of capacity and customer sizing.
- Maintain accurate revenue forecasting.
- Maintain material control and liability.
- Develop Master Production Schedule (MPS) and load into Jabil’s ERP system, including Purchase Order (PO) coverage.
- Reconcile the MPS to customer PO coverage weekly to ensure that Jabil is not exposed over and above customer PO coverage or other authorized customer demand.
- Ensure the MPS is always 100% accurate and achievable.
- Achieve and maintain 95% MPS goal.
- Own production planning, BOM and document control with or without additional support.
- Analyze material and capacity requirements and communicate constraints to the Workcell and customer based on accurate customer demand.
- Maintain the workcell’s capacity planning model; drive resolution on uneven capacity utilization that keeps Jabil focused on the customer but efficiently utilizing manufacturing resources.
- Meet daily with the Workcell and manufacturing team to assess production schedules, (adjust as necessary based on production results) optimize run quantities, and minimize changeovers to help achieve 100% on time delivery.
- Maintain the customers’ latest contract on file at all times and be familiar with the terms and conditions of the contract regarding customer liability of material planning and production scheduling. This includes the liability window for Jabil material purchase order placement, purchase price for components, and liability for any in-house materials (purchased and manufactured).
- Be the workcell’s “expert” on all planning activities by supporting the Production Planner goal of never starting to build product without having a valid PO, adequate material quantities, and accurate BOM and an accurate routing.
- Lead the Workcell on the creation of Bills of Material (BOMs) and routings that allows accurate tracking of WIP assemblies and accurate inventory movement transactions.
- End-of Life (EOL) management should include chairing a meeting 30 days prior to the last planned build date to create tactics to support the EOL strategy. The Master Planner would own the build schedule, corrections and resolution of MPS to customer demand, planned tactics on deadlines for assemblies out of the various work areas on the floor, deadline for last shipment, and support plan for potential RMAs.
- Manage Jabil purge process for internal Workcell purges.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
EDUCATION & EXPERIENCE REQUIREMENTS
- Bachelor’s degree + 5 years of experience, or Masters + 3 years of related experience, or PhD without experience.
- APICS certification and Supervisor experience also preferred.
- Thorough knowledge of MRP, lead times for specific component types, internal run rates, test development lead times, machine programming lead times and complete understanding of the chronological sequence of events that must occur in order to build a product.
- Or an equivalent combination of education, training, or experience.
A MISSION WORTHY OF A CAREER! If you're looking for "just a job," then stop reading right now.
But, if you're looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S.
Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent.
USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify.
Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America.
Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below) .
Salary and Benefits Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632
- $92,219 per year.
Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.
*Recruitment Incentive
* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be eligible for up to $20,000 in incentives.
The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ.
*Retention Incentive
* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Duty Locations IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.
U.S.
Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences.
Relocation may be required.
Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others.
A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014.
This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12.
You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.
Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations: Big Bend Sector Stations
-
*Presidio, Van Horn,
*Sanderson, Alpine,
*Sierra Blanca, Marfa Buffalo Sector Stations
- Wellesley Island Del Rio Sector Stations
- Del Rio, Brackettville,
*Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde El Paso Sector Stations
- Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces,
*Lordsburg, Santa Teresa, Ysleta El Centro Sector Stations
- El Centro, Indio, Calexico Grand Forks Sector Stations
- Pembina Havre Sector Stations
- Havre, Malta, Plentywood, Scobey, Sweetgrass Houlton Sector Stations
- Calais, Fort Fairfield, Jackman, Rangeley, Van Buren Laredo Sector Stations
- Laredo South, Cotulla,
*Hebbronville, Laredo West,
*Freer, Laredo North, Zapata Rio Grande Valley Sector Stations
- Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen San Diego Sector Stations
- Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente Spokane Sector Stations
- Colville, Curlew, Metaline Falls, Oroville Swanton Sector Stations
- Beecher Falls, Burke, Champlain, Newport, Richford Tucson Sector Stations
-
*Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox Yuma Sector Stations
- Blythe, Yuma, Wellton Duties and Responsibilities As a BPA, you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.
Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include: Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband Performing farm checks, building checks, traffic checks, city patrols, and transportation checks Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications You qualify for the GL-5 grade level if you possess one of the following: Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education: A combination of general work experience AND successfully completed college education.
This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You qualify for the GL-7 grade level if you possess one of the following: Experience: One year of specialized work experience that shows you have the skills necessary to: Make sound judgments and decisions in the use of firearms.
Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.
The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.
Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership.
Or will receive a bachelor's degree with Superior Academic Achievement.
Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level.
Please refer to the BPA GL-9
- 11 announcement.
Other Requirements Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA).
The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training : After you are hired, you will be detailed to the U.S.
Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses.
Border Patrol work requires the ability to speak and read Spanish, as well as English.
Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.
How to Apply: Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit.
You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam .
If you have questions about the application process, contact a recruiter through the U.S.
Border Patrol page: /s/usbp .
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
USBP is hiring immediately for full-time, career positions , where your prior law enforcement officer (LEO) experience may qualify you for higher-graded Border Patrol Agent (BPA) opportunities.
Whether you gained this experience as part of a military police unit or as a member of a state or local law enforcement organization, you have an opportunity to work with highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission.
Now is the time to make your move, along with excellent base pay, location pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives to newly appointed Agents (see details below).
Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences.
Relocation may be required.
Customs and Border Protection (CBP) is hiring immediately for these full-time, career Law Enforcement Officer (LEO) opportunities.
Salary and Benefits: Salary for newly appointed law enforcement Border Patrol Agents varies from: Overtime Pay: Up to 25% Duty location impacts pay rates; All Border Patrol Agents may select from an array of federal employment benefits that include health and insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan that is similar to traditional and ROTH 401(k) offerings.
*Recruitment Incentive
* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive.
The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location.
Retention Incentive
* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.
Big Bend Sector Stations
-
*Presidio, Van Horn,
*Sanderson, Alpine,
*Sierra Blanca, Marfa Buffalo Sector Stations
- Wellesley Island Del Rio Sector Stations
- Del Rio, Brackettville,
*Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde El Paso Sector Stations
- Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces,
*Lordsburg, Santa Teresa, Ysleta El Centro Sector Stations
- El Centro, Indio, Calexico Grand Forks Sector Stations
- Pembina Havre Sector Stations
- Havre, Malta, Plentywood, Scobey, Sweetgrass Houlton Sector Stations
- Calais, Fort Fairfield, Jackman, Rangeley, Van Buren Laredo Sector Stations
- Laredo South, Cotulla,
*Hebbronville, Laredo West,
*Freer, Laredo North, Zapata Rio Grande Valley Sector Stations
- Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen San Diego Sector Stations
- Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente Spokane Sector Stations
- Colville, Curlew, Metaline Falls, Oroville Swanton Sector Stations
- Beecher Falls, Burke, Champlain, Newport, Richford Tucson Sector Stations
-
*Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox Yuma Sector Stations
- Blythe, Yuma, Wellton Duties and Responsibilities: Detecting and questioning people suspected of violating immigration and customs laws and inspecting documents and possessions to determine citizenship or violations.
Preventing and apprehending aliens and smugglers of aliens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations.
Performing farm checks, building checks, traffic checks, city patrols, and transportation checks.
Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.
Qualifications: GL-9: You qualify for the GL-9 grade level if you possess one (1) year of specialized experience, equivalent to at least the next lower grade level, performing duties such as: Performing physical searches of detained individuals, their vehicles, and their immediate surroundings for weapons, contraband, currency, and other evidence.
Apprehending, physically restraining, or working with law enforcement officials to identify or apprehend violators of state, federal, or immigration laws.
Proficient in the use of firearms, preparing investigative reports, serving court orders (e.g., and gathering evidence for criminal cases prosecuted through the court system.
GS-11: You qualify for the GS-11 grade level if you possess one year of specialized experience equivalent to at least the next lower grade level, with the authority granted by the state or government to enforce laws, make arrests, and investigate crimes, performing primary duties in an official law enforcement capacity such as: Utilizing intelligence information to track illegal operations, criminal activity, threats to our nation, and/or contraband while serving as a state, federal, or military law enforcement official.
Leading investigations of fraud, contraband, criminal activity, threats to our nation, and/or illegal operations to determine sources and patterns while serving as a state, federal, or military law enforcement official.
Apprehending violators of state, federal, or immigration laws by utilizing various forms of complex technology that include surveillance, detection, situation awareness systems, and/or communications equipment.
Make arrests and exercise sound judgment in the use of firearms; or develop and maintain contact with a network of informants.
There are no education substitutions for the GL-9 or GS-11 grade-level Border Patrol Agent opportunities.
Citizen to apply for this position.
S.
residency (including protectorates as declared under international law) for at least three of the last five years.
In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.Veterans' Preference : You may also be eligible for an excepted service Veterans' Recruitment Appointment (VRA).
The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training : Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement, and USBP-specific operations, driver training, physical techniques, firearms, and other courses.
Border Patrol work requires the ability to speak and read Spanish, as well as English.
Border Patrol Agents will be provided training to become proficient in the Spanish language at the Academy.
Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest, select Border Patrol Agent, and then complete the pre-screening questions.
You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.
If you have questions about the application process, contact a recruiter through the U.Border Patrol page: /s/usbp.
NOTE: As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.
