Jobs in Pacific County, WA

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes

• Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.

• Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.

• Determine and/or develop methods where procedures may not be available.

• Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.

• Operate, use and maintain overhead maintenance work platforms

• Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.

• Inspect and maintain building runway rails and expansion joints.

• Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.

• Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.

• Maintain logs, charts, and perform written and verbal tie-in records.

• Prepare reports and schedules as required.

• Work with and assist employees of other classifications as required.

• Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances

• 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.

• Able to lift up to 35 pounds.

Preferred Qualifications:

• Experience inspecting and maintaining building runway rails and expansion joints.

• Preference given to those with 2 years overhead crane experience.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: 33.32 – 61.01

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

As a Flexible Machining System (FMS) Operator you will have the opportunity to work with advanced CNC technology, ensuring precision and efficiency in the machining process. Your expertise will be essential in optimizing machine setups and operations, contributing to the production of high-quality components that meet stringent industry standards

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities

• Prepare for job setup by reviewing work orders, tie-in sheets, operator documents, blueprints, or CATIA plots for production orders, first lots, or tool tryouts.

• Review Work Orders (W/O) to confirm the correct type and quantity of materials and tools or fixtures are issued and free from visible defects, updating CMES as necessary.

• Identify the type of setup required based on documentation and check machine setups or parts completed by previous operators to assess job progress and ensure safe working conditions.

• Select and verify the condition of machine accessories and holding devices (e.g., chucks, vises, templates) and identify any required fixtures or shop aids.

• Attach air nozzles or suction devices for vacuum fixtures, securing them with bolts or clamps as specified in the operator setup documents.

• Use overhead cranes to load and unload parts and fixtures as required for the machining process.

• Upload and download CNC (Computer Numerical Controlled) programs to machine controllers using computing equipment from various servers or databases.

• Select and check cutting tools according to program specifications, ensuring they are the correct type, length, diameter, and in good condition before installation.

• Set machine coordinates or index points per CNC documents, including cutter offsets, tool heights, and probes, using appropriate measuring tools.

• Run CNC programs to machine rough and precision cut parts, monitoring machine operations for unusual vibrations, sounds, or warning indicators.

• Adjust machine settings (e.g., speeds and feeds) to correct machining issues or prepare the machine for subsequent operations, including head and spindle angles.

• Troubleshoot and repair minor controller problems as required, and initiate requests for corrective action when machine malfunctions occur.

• Perform Statistical Process Control (SPC) functions as required to ensure quality standards are met.

• Check completed work for defects and ensure parts meet drawing specifications, removing sharp edges with deburring tools as required.

• Maintain personal and tool certifications and assist planners or programmers in determining final numerical control programs to optimize machine utilization and minimize setups.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ years of experience setting up and operating Manual and CNC machines

• 2+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators

• 2+ years of experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications

•  2+ years of experience working with powered hand tools

• Experience with reading and interpreting drawings, specifications, material processes, schematic and diagrams

• Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift

Preferred Qualifications:

• Experience in Fabrication of airplane parts

• Experience in Fabrication of temporary tooling

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $33.32/hour, with the potential to earn up to $61.01 /hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Mar. 20, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Contingent Upon Program Reward

The position is contingent upon program award

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician to join our Electronics team in Auburn & Puyallup, Washington.

In this role, you will be empowered to apply your technical expertise and creativity to solve complex challenges in cutting-edge aerospace technology. You'll work with a diverse team to develop, test, and maintain advanced electronic systems that are critical to the success of our aircraft. This position offers a dynamic environment where innovation, precision, and continuous learning are valued, giving you the chance to grow your skills while making a tangible impact on aviation excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform electronic and software testing, diagnosis, troubleshooting, adjustment, repair, calibration, checkout, and maintenance of electronic systems and associated equipment, often developing and improvising service procedures as needed.
• Fabricate, assemble, and test developmental and prototype mechanical, electrical, electromechanical, and electronic assemblies, including those utilizing software/firmware applications.
• Lead, instruct, and review the work of employees in lower classifications assigned to fabricate, assemble, test, calibrate, repair, modify, maintain, and service electronic equipment and systems.
• Operate and utilize test equipment, instruments, tools, and machines required to complete work assignments.
• Interpret and work from block diagrams, schematic diagrams, prints, specifications, technical information, manufacturing records, sketches, and verbal instructions.
• Perform design and fabrication work related to packaging developmental assemblies, including mechanical and assembly fabrication, with engineering assistance.
• Maintain certifications, licenses, and permits necessary for work assignments.
• Prepare reports, maintain records, and ensure accountability of contract tools and test equipment.
• Devise and build temporary tools and work-around methods to facilitate troubleshooting and repair.
• Handle and protect components and assemblies in accordance with shop practices, procedures, and drawing requirements.
• Prioritize work assignments as directed by leads or supervisors and obtain necessary engineering drawings and test documents when not provided.
• Set up and perform bench or automatic tests per work orders, test documents, equipment manuals, and engineering instructions.
• Troubleshoot faults in electronic circuits and hardware, adjusting, repairing, or replacing components as required.
• Select and use appropriate hand, power, and bench tools to perform required operations.
• Maintain test equipment through periodic maintenance and monitor certification dates.
• Troubleshoot and repair computerized test systems.
• Handle and dispose of hazardous materials safely, following Safety Data Sheets (SDS) and using personal protective equipment.
• Pack electronic equipment for travel according to drawings and Boeing specifications.
• Verify work quality after each operation to ensure compliance with drawings and standards.
• Prepare completed or reworked jobs for inspection.
• Communicate with leads, supervisors, engineers, or planners when assistance or clarification is needed, especially regarding drawings, paperwork, or discrepancies.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 120.62 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• Ability to lift, push, and pull up to 35 pounds.
• 3+ years of experience using electronic test equipment.
• 3+ years of hands-on experience with power and control electronics circuit design, product design and manufacturing.
• 3+ years of experience testing and troubleshooting electronics and electrical systems.

Preferred Qualifications:

• UL Certified Electrician.

Conflict of Interest:

Successful candidates for this job must successfully satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $33.32/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Job Description Qualifications:

The P-8 Mission Systems Integration & Test team in Kent, WA. is seeking a Systems Engineer Support Analyst with P-8 Poseidon experience. We are looking for candidates that have operational experience functioning as a Tactical Coordinator (TACCO) to help test and improve the quality and capability of the P-8 Mission Systems software products and deliver the best possible solutions to our customers.

Primary Responsibilities:

• Develop P-8 Mission Systems scenario test procedures to be executed in our Weapons Systems Integration Lab or International Systems Integration Lab.
• Execute P-8 Mission Systems scenario test procedures in our Weapons Systems Integration Lab or International Systems Integration Lab serving as the TACCO.
• Identify and document defects (non-compliance to software requirements or usability) found within the Mission Systems software or avionics suite.
• Support systems-level integration and test activities of the P-8 Mission Systems and avionics suite.
• Support the Mission Systems software development team by providing recommendations on integrating new functional capabilities or resolving defects.

This position will be 100% onsite in Kent, WA

This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Basic Qualifications (Required Skills & Experience):

• 5 or more years of related work experience or an equivalent combination of technical education and experience with 2+ years of experience as a Tactical Coordinator or Co-Tactical Coordinator on a P-8 aircraft.
• Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology, computer science, engineering data science, mathematics, physics or chemistry. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Preferred Qualifications (Desired Skills & Experience):

• 8 or more years of related work experience or an equivalent combination of technical education and experience.
• 3+ years of experience as a Tactical Coordinator or Co-Tactical Coordinator on a P-8 aircraft.

• Experience operating in a laboratory environment.
• Experience with Software Trouble Reports.
• Familiarity with Agile Software Development principles.
• Weapons school experience.
• Experience with the Advanced Airborne Sensor (AAS).
• Current DoD Secret or Higher security clearance.

Relocation:

This position does offer relocation.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This position is for 1st shift. Occasional alternative shifts as needed.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Level 3: $106,250-$143,750

Level 4: $130,900-$177,100

Applications for this position will be accepted until Apr. 06, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing is seeking an experienced and dedicated Software Certification Engineer to lead our engineering team in the critical mission of developing and certifying safe, reliable, and innovative aircraft. This role is paramount in ensuring that our aircraft not only meet but exceed the rigorous safety standards set forth by the Federal Aviation Administration (FAA). The Software Certification Engineer will play a vital role in fostering a culture of safety and excellence, making significant contributions to the certification process that underpins the trust of our customers and the flying public.

Why This Role is Important:

The Software Certification Engineer is a cornerstone of Boeing's unwavering commitment to safety and excellence in aviation. This role is crucial in ensuring that our aircraft not only meet the regulatory standards set by the FAA but also embody the highest levels of safety and reliability. By partnering closely with the FAA, the Software Certification Engineer will help shape the future of aviation, driving innovation while safeguarding the trust of our customers and the flying public.

Join us in our mission to connect, protect, explore, and inspire the world through aerospace innovation. Apply today to be part of a team that is dedicated to setting the standard for safety and excellence in the aerospace industry!

Position Responsibilities:

• Lead and manage a team of engineers focused on the design, analysis, and testing of aircraft systems and components, with an unwavering commitment to safety.
• Cultivate a safety-first mindset within the engineering unit, ensuring that all engineering practices prioritize the well-being of passengers and crew.
• Collaborate closely with the FAA to navigate the complex certification process, ensuring that all aircraft designs comply with stringent regulatory requirements and safety standards.
• Develop and implement engineering strategies that emphasize safety and reliability, aligning with Boeing's commitment to delivering the highest quality aircraft.
• Serve as the primary liaison for FAA representatives, facilitating transparent communication and collaboration throughout the certification journey.
• Oversee the preparation and submission of comprehensive technical documentation required for FAA certification, ensuring that all materials reflect the highest standards of accuracy and thoroughness.
• Mentor and develop engineering staff, instilling a deep understanding of safety protocols and certification processes to enhance their professional growth and technical expertise.
• Analyze and resolve complex engineering challenges with a focus on safety, leveraging data-driven decision-making and industry best practices.
• Monitor project progress and performance, ensuring that engineering solutions are delivered on time and meet all safety and certification milestones.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience):

• Bachelor's Degree
• 5+ years of experience as a Designated Engineering Representative (DER) or Technical Standard Order (TSO) Certification Specialist.
• 9+ years of experience in RTCA DO-178(B/C) Software Considerations in Airborne Systems and Equipment Certification
• 5+ years' experience in software engineering

Preferred Qualifications (Desired Skills/Experience):

• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• 12+ years related work experience or an equivalent combination of education and experience
• Current Designated Engineering Representative (DER) or Technical Standard Order (TSO) Certification Specialist
• Experience with concurrent software and distributed systems
• 12+ years' experience in software development life cycles, configuration management and best agile software engineering practices
• 9+ years' experience developing, documenting and maintaining architectures, requirements, algorithms, interfaces and designs for software systems
• 9+ years' experience leading software development projects
• Leads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems
• Leads development, selection, tailoring and deployment of processes, tools and metrics
• Experience using common software version control tools such as Git
• Experience with Agile planning tool such as JIRA, TSF

Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union: This is a union-represented position

Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range – Level 4 (Senior) - $136,850 - $185,150Summary Pay Range – Level 5 (Lead) - $167,450 - $226,550

Applications for this position will be accepted until Mar. 25, 2026

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing's Phantom Works is seeking an AC5 Chief Engineer – Phantom Works

The AC5 Chief Engineer will lead the technical direction and engineering personnel of the Advanced Communications, Computing, Cyber, Command and Control (AC5) portfolio within the Phantom Works Tech Base division. The position will direct the AC5 Thrust leads in setting technical strategies and roadmaps for air and space technology development, and report to the Phantom Works Systems Engineering Capability Leader.

You will lead an IPT spanning multiple functions including supply chain, IP&S, Quality / Supplier Quality, Production Engineering, Design Eng, Liaison Eng, Operations, and Materials & Processes to develop software and hardware prototypes conducting command and control across air, space, maritime, and land domains. You will provide technical direction over AC5's sub-portfolios of advanced command and control, advanced mission planning, advanced communications, and advanced computing. Additionally, you will be Phantom Works' multi-domain advocate across the BDS divisions, providing education and alignment on the DAF's Battle Network, DON's Project Overmatch, DOA's Project Convergence, and USSF's KRONOS.

This role is an excellent opportunity to further develop your leadership and visioning skills as you will set and lead a team in successful execution of a long-term long range kill chain objectives. You will gain valuable experience working with the various functions who all support production of major aircraft assemblies as well as interacting with and managing large external suppliers. You will be called upon to brief and provide status to program executive leadership team, DoD, and Service customers.

Your initial responsibilities will be to execute programs within the IPT, lay out a growth plan, lead program make/buy decisions, and provide technical direction to the overall programs.

Position Responsibilities:

• Integrate air and space platforms into Department‐level system‐of‐systems architectures across the DAF, Navy, and Army
• Define and execute systems engineering strategy, technical roadmaps, and integrated plans that advance program milestones and TRLs
• Advocate for R&D and IRAD investments to advance Boeing's discriminator technologies
• Provide technical direction and leadership for a team of ~75 engineers across multiple programs
• Oversee supplier technical performance and ensure engineering artifacts meet Boeing and customer standards
• Drive process improvements to reduce schedule slip and technical risk
• Ensure effective collaboration with internal stakeholders, customers, and partners
• Foster an inclusive, psychologically safe work environment that emphasizes safety, quality, innovation, and transparent communication

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Colorado Springs, CO, St Louis, MO, and/or Seattle, WA

Travel may be required up to 25% of the time; Domestically depending on business needs.

This position requires the ability to obtain a U.S. Top-Secret Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret/SCI Clearance Post-Start is required.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• 1-2 years of experience with the space domain
• 10+ years of engineering experience with 5+ years in program or people leadership
• Proven product development and systems engineering experience across lifecycle phases
• Experience with joint all-domain command and control concepts

Preferred Qualifications (Desired Skills/Experience):

• Ability to obtain TS/SCI Clearance
• 3-5 years of experience with the space domain
• Experience with Air and Space platform AIT/development and DoD customers (DAF, Navy, Army)
• Demonstrated record capturing and executing R&D/IRAD projects and transitioning technology to programs of record
• Prior exposure to MBSE and digital engineering tools and model‐based workflows
• Strong written and verbal communication skills and experience managing high‐performance teams

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting
• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

Summary pay range: $141,100 - $204,700

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret/SCI Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Defense, Space and Security (BDS), is looking for an Associate or Mid-Level SAR Signal & Image Processing Engineer (Level 2 or 3) to join the Kent Space SEIT team located in Kent, WA (Seattle, WA). This position will focus on developing radar analysis and algorithms in a mission-critical environment that directly empowers our defensive capabilities. You will develop and validate requirements for Synthetic Aperture Radar (SAR) systems, perform trade studies, design and run tests to verify performance, support engineering compliance, and provide lifecycle root-cause analysis. Work is performed under general direction with contributions to proposals as needed.

This role emphasizes algorithm design and software implementation: develop and evaluate radar algorithms (signal and image processing, detection, tracking, imaging) and translate them into production-ready code. Proficiency in Python or C++ for algorithm development, prototyping, and data analysis is required; experience with signal and image processing toolsets, real-time software constraints, requirements tracing, and test-program design is highly valued. Strong analytical, communication, and customer-focused skills with a commitment to quality and safety are essential.

Position Responsibilities:

• Develop, implement, and test radar algorithms and translate analytic designs into production-ready code using Python (and other languages as needed)
• Perform trade studies to evaluate algorithm and system performance; iterate designs based on results and test data
• Participate in customer meetings, capture requirements and feedback, and provide technical support for operational tools and deployments.
• Support agile software development practices: write user stories, participate in sprints, review code, and deliver incremental capability updates.
• Define and execute test plans, perform root-cause analysis of anomalies, and coordinate with suppliers and cross-functional teams to ensure requirements compliance.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• Requires an active DoD Top Secret Clearance
• 2+ years of relevant experience in radar systems, electromagnetic analysis, or related fields, including algorithm development and system-level testing.
• 1+ years' experience with Python, C++, C, or Matlab for algorithm development, prototyping, and data analysis; experience with signal processing toolsets and simulation environments
• Demonstrated ability to derive and trace requirements, DEVELOP test CASES, and collaborate across multidisciplinary engineering teams
• Willing to travel domestically as needed (~10%)

Preferred Qualifications (Desired Skills/Experience):

• Active TS/SCI
• Advanced degree (MS or PhD) in Electrical Engineering, Physics, Applied Math, or related field with focus on radar or electromagnetics.
• Experience with real-time software architectures and implementation (C/C++, RTOS, or embedded systems).
• Prior work on radar signal processing algorithms (detection, tracking, SAR/ISAR, waveform design) or electronic warfare techniques.
• Familiarity with MATLAB/Simulink, NumPy/SciPy, and signal-processing libraries and toolchains.
• Hands-on experience with test-range operations, hardware-in-the-loop (HIL), and flight or ground test campaigns.
• Knowledge of requirements management tools, model-based systems engineering (MBSE), and supplier/partner integration processes.
• Experience working in an Agile software development environment and DevOps methodologies

Drug Free Workplace:Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Coding Challenge:To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Associate (Level 2) Summary Pay Range: $98,600 - $133,400

Mid-Level (Level 3) Summary Pay Range: $119,850 - $162,150

Applications for this position will be accepted until Mar. 27, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

Relocation assistance is not a negotiable benefit for this position.

Security Clearance

This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Contingent Upon Program Reward

The position is contingent upon program award

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Test & Evaluation (BT&E) organization is looking for an Electrophysics Engineer - Antennas & Propagation to join our Test and Evaluation team in the Antenna Test Center in Kent, WA.

The Antenna Test Center is home to the largest fully welded/shielded anechoic chamber in the Boeing Company, a Near Field Scanner and an Electromagnetics Lab.

BT&E is currently hiring for a broad range of experience levels including Experienced and Senior level Electrophysics Engineers.

This position will develop test plans/procedures to measure antenna patterns, peak gain and other antenna parameters as requested by customers of the facility. The selected candidate will be responsible for evaluating range performance and planning strategic capital investments to improve lab capability to meet future customer needs.

The candidate should have strong fundamental knowledge of antenna design, RF and electromagnetic theory. The candidate should have experience using RF test equipment including Vector Network Analyzers (VNAs), Spectrum Analyzers, Power Meters, etc. This position is responsible for maintaining the lab schedule prioritizing day-to-day activities in support of lab operation.

Position Responsibilities:

• Test antenna and radome parameters using VNAs and automated systems
• Interpret and calculate antenna parameters from measured data
• Write scripts in VBScript to automate testing with antenna positioning system
• Maintain and coordinate lab schedule with various lab customers and lab personnel

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• Experience working in RF measurements, Antenna Theory/test, and/or material measurements and characterization
• Experience applying electromagnetic theory to develop new antenna and radome types and technologies
• Experience with test equipment including RF (radio frequency) sources, power meters, and spectrum analyzers
• Experience leading or managing projects and/or teams

Preferred Qualifications (Desired Skills/Experience):

• 5 or more years of related work experience or an equivalent combination of education and experience
• Master's Degree or higher in Electrical Engineering, Engineering Physics or Physics
• Experience developing object-oriented software systems and/or experience working RF Radio/Antenna systems and test equipment

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union:

This is a union-represented position.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range for experienced level: $119,850 - $162,150

Summary pay range for senior level: $146,200 - $197,800

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret/SCI Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Defense, Space & Security (BDS) organization is seeking a Senior Systems Software Engineer to join the P-8 Missions System Software Engineering team in Kent, Washington.

The P-8 Mission Systems Software Operating Systems (OS) team needs a strong software architect on-site to lead a variety of products including the Virtual Integration Platform (VIP).

The P-8 Poseidon program is the premier Anti-Submarine Warfare (ASW) platform for the US Navy and several international partners. Candidates will belong to an Agile software engineering development team that supports operating system, hardware, platform, and application development.

This engineer shall lead, oversee, and direct design, development, analysis, and maintenance of software systems, possess applicable domain experience, and work with internal and external teams across the P-8 Program to support Operating Systems development. Duties include but are not limited to: developing requirements, creation of design documentation inputs/formatting, technical coordination/cross-training, software development, and software validation and testing.

Position Responsibilities:

• Lead and oversee the design, architecture, development, and maintenance of P-8 Operating Systems products including the Virtual Integration Platform (VIP) and P-8 Trainer variants

• Lead and oversee the design, architecture, prototyping, and development of mission computing and software modernization
• Partner with software and hardware stakeholders to inform system definition and oversees translation of system-level requirements into software requirements to meet Navy customer capability requests
• Provide cross-team architecture level guidance for P-8 Mission Systems Software including estimation of new business and opportunities
• Mentor junior engineers and provide cross-training within the team by implementing and documenting standard design, test, and execution processes and procedures for the OS and VIPs

Basic Qualifications (Required Skills/ Experience):

• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• 10+ years of experience with C, C++, C#, Python, Java, or Ada

• Experience with requirements analysis, management, and decomposition
• Experience with standard engineering tools such as MBSE/PLE, Cameo, DOORS and common collaboration tools (Jira, Confluence, Git)

Preferred Qualifications (Desired Skills/Experience):

• 20+ years related work experience or an equivalent combination of technical education and experience
• Advanced degree (MS/PhD) in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science

• Experience with mission systems, avionics, command & control architectures, embedded systems, sensor systems, or related defense/space programs.
• Prior work on software-in-the-loop, hardware-in-the-loop, flight test, or distributed system integration.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

CodeVue Coding Challenge:

To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $190,400-$257,600

Applications for this position will be accepted until Mar. 26, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

Relocation assistance is not a negotiable benefit for this position.

Security Clearance

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Job Description

The Boeing Commercial Airplanes Liaison Engineering Organization is seeking Consultant (Level 5) Liaison Engineers to support operations in Everett, Seattle, Auburn, and or Renton Washington. We are looking for a proactive individual who can make prompt engineering decisions and who want to go beyond their desk and into the factory for hands on engineering.

This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel.  The candidate will be the engineering representative on the factory floor transforming design into reality.

Position Responsibilities: 

• Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
• Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle.
• Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
• Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
• Develops and implements product/process improvements.
• Supports Integrated Product Teams (IPT) and participates in design reviews.
• Represents the engineering community from initial build through the production and post-production environment.
• Ensures supplier and build partner compliance with Boeing standards.
• Develops customer correspondence for continued safe operation and maintenance of equipment.
• Participates in on-site disabled product repair teams, accident investigation and support teams.
• Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.
• Designs interim structural repairs and conducts static strength analysis.
• Develops non-destructive test procedures, tools and standards.

This position is fully onsite. The selected candidate will be required to work onsite at one of the listed locations. This position involves daily exposure to factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of build.

This position participates in the approximately 9-month Boeing Company Training Rotation Program, which may involve assignments to the first, second, or third shift, as well as weekend or daily overtime. The specific requirements for shift assignments and overtime vary between sites and are typically covered on a rotation basis. Additionally, there may be travel involved between Boeing Puget Sound sites during the training rotation.

Basic Qualifications (Required Skills/Experience): 

• Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
• 14+ years of experience in structures, systems, design, or production engineering

Preferred Qualifications (Desired Skills/Experience): 

• Hands-on experience with materials and manufacturing processes.
• Prior BCA Engineering Material Review Board (MRB) Certification

Conflict of Interest:

 Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment 
process

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Shift:

This position is for multiple shifts and may require off shift, weekend, and travel assignments.

The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime. This requirement varies from site to site and is typically covered on a rotation basis.

Union:

This is a union represented position.

In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.
 

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

• Summary pay range for Expert (level 5): $165,750 - $224,250

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is hiring Manufacturing Planners to join our Fabrication team in Auburn Washington as part of our Production Engineering organization.

In this role, you will will serve as contributors to help support the implementation and sustainment of new and existing build plans that significantly impact the quality and cost performance of the program. We’re seeking innovative, detail- oriented planners who thrive in dynamic environments and bring a problem-solving mindset to complex production challenges. Join us and help shape the future of commercial aviation!

Our team is currently hiring for a broad range of experience levels including Associate and Mid-Level Manufacturing Planners

Primary Responsibilities:

• Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.

• Assists with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.

• Assists in reviewing supplier data to ensure manufacturing related requirements are met.

• Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements.

• Assists in tooling dispositions. Investigates and resolves manufacturing related issues of limited scope.

• Assists with producibility assessments for part or product designs.

• Assists in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.

• Develops work statements and sequencing of events to support delivery commitments.

• Assists in the review, maintenance and monitoring of internal documents. Works under general supervision.

Basic Qualifications (Required Skills/ Experience):

• Experience in a manufacturing/ production environment.

• Ability to read, understand, and interpret engineering drawings and specifications.

• 1 or more years related work experience or an equivalent combination of education and experience. (Associate Level)

Preferred Qualifications (Desired Skills/Experience):

• 3 or more years related work experience or an equivalent combination of education and experience. (Mid-Level)

• Experience working with sheet metal and/or machining commodities

Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation:

This is a union-represented position.

In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. 

• Summary pay range for Associate (Level 2): $65,450 - $88,550

• Summary pay range for Mid-Level (Level 3): $78,200 - $105,800

Applications for this position will be accepted until Mar. 19, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Machine Repair Mechanic to join our Equipment Services team in various locations across Washington State.

As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount. You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment. Your commitment to safety will be reflected in your adherence to SHEA regulations and best practices while guiding and mentoring team members.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.
• Conduct preventative maintenance inspections on stationary generator sets and other equipment.
• Ensure compliance with SHEA regulations while performing all tasks.
• Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.
• Utilize schematics, blueprints, specifications, manuals, and applicable procedures to complete work assignments effectively.
• Develop assembly methods when procedures are not available, documenting these methods for future reference.
• Hand scrape, flake, lap, level, and align equipment components as needed.
• Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.
• Perform operational tests on machine tools and building equipment to ensure functionality.
• Maintain logs, charts, and records, preparing reports and schedules as required.
• Conduct preventive and predictive maintenance inspections to ensure equipment reliability.
• Collaborate with other crafts to accomplish tasks and assist as needed.
• Perform incidental rigging to facilitate work tasks.
• Carry out work in other classifications when necessary to complete assignments.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• 3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).
• Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.

Preferred Qualifications:

• Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.
• Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
• Ability to work around electromagnetic fields because of various types of production equipment.

Conflict of Interest:
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $46.00/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 03, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray B to join our Paint team in the Puget Sound in Washington. 

As a Painter Spray B, you will be a key player in our commitment to delivering high-quality finishes on aircraft components. Candidates must have the ability to see color accurately, as your expertise in applying various coatings, including primers and protective finishes, will ensure that every part meets stringent quality standards. You will prepare surfaces meticulously, utilizing your skills to remove corrosion and perform chemical reactivation as needed. Your attention to detail will be critical as you operate curing ovens and monitor time-sensitive materials, ensuring that all processes adhere to established specifications. Additionally, you will collaborate with team members to maintain an efficient workflow, contributing to a safe and compliant work environment. 

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.  

Position Responsibilities: 

• Spray and/or brush prime, finish prime, and protective coatings to aircraft detailed parts and assemblies in accordance with blueprints and specifications. 

• Prepare surfaces to ensure proper adhesion, including the removal of corrosion and paint stripping, as well as performing chemical reactivation of painted surfaces. 

• Perform rework and touch-up painting using spray and brush techniques per BAC specifications. 

• Prepare various paint materials, such as primers, enamels, and lacquers, according to BAC specifications. 

• Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use. 

• Mask and unmask areas as required to facilitate painting operations, following drawings and specifications. 

• Set up all equipment and supplies necessary to perform work assignments. 

• Operate curing ovens and related equipment, ensuring they function properly for the current painting process and documenting as required. 

• Monitor and maintain time-sensitive materials and processes, ensuring compliance with operational standards. 

• Review work instructions to support the division of work for incoming orders and ensure compliance with quality requirements. 

• Part mark and wrap finished parts and assemblies as required per BAC specifications. 

• Obtain and maintain necessary certifications and qualifications for the role. 

• Screen work instructions to ensure clarity and adherence to specifications. 

• Coordinate with team members to ensure efficient workflow and adherence to schedules. 

• Document equipment functionality and any adjustments made during the painting process.  

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.  

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Basic Qualifications:  

• Experience prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience using and maintaining various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.

• Experience using basic math (e.g. addition, subtraction, multiplication, division, & ratios).

• Experience handling and disposing hazardous materials per government regulations.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to use and operate low impact vibratory tools (sander/buffer).

• Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

Preferred Qualifications: 

• Experience performing aircraft or autobody painting and finishing operations.

• Experience utilizing and following detailed work instructions.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift Work Statement:  

• This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay: $23.32/hour, with potential to earn up to $47.54/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton, Washington.

As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes. Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests. You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components. Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
• Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
• Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
• Load sealing guns and clean sealing equipment, ensuring proper functionality.
• Hand mix sealant as required and perform rework or pickups on assigned assemblies.
• Assist with pressure testing operations as assigned.
• Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
• Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
• Keep supervisors informed of progress and coordinate information with employees on other shifts.
• Mask areas as required to facilitate corrosion removal or painting operations.
• Prepare fuel vents for leak tests and restore them to normal after testing.
• Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
• Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Completed 1+ year of aerospace sealing in high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.  

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes. Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards. To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations. You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements. Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Inspect mockups of engineering design changes to ensure adherence to specifications.

• Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

• Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

• Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

• Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

• Document discrepancies and report them to the appropriate personnel for resolution.

• Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

• 3+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

• 1+ years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

• Experience as a Quality Inspector.

• Experience working with Microsoft Office (Excel, Word, PowerPoint).

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to complete Fall Protection Training.

Preferred Qualifications:

• Experience inspecting welds / welds certification

• Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.)

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Press Operator, Hydraulic & Mechanical A, to join our Fabrication team in Algona, Auburn, and Everett Washington.

As a Press Operator Hydraulic & Mechanical A, you will be a vital part of our manufacturing team, responsible for setting up and operating hydraulic and mechanical presses to shape and form various materials. Your role will involve obtaining work packages, performing safety checks, and ensuring that all equipment is properly set up and maintained. You will utilize your technical skills to troubleshoot issues, verify material quality, and collaborate with team members to optimize production processes. Your attention to detail and commitment to excellence will directly contribute to our operational success.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain work package from the ready-to-work rack, work board, or assigned by Team Lead, or run previously set-up jobs by reviewing tie-ins from prior operators.

• Operate a computer to access information from prints, sketches, drawings, layout documents, and Boeing (BAC) specifications.

• Perform safety checks on machines, ensuring the area is clear of obstacles, power switches are off, and safety guards are installed.

• Move heavy materials, equipment, tools, and dies to the work area using stackers, Kalamar, die loaders, or overhead cranes, asking for assistance as needed.

• Check steam lines for cracks or cuts and verify o-rings are properly seated prior to hookup.

• Preheat dies and punches using electricity or steam, and verify temperature accuracy for hot dies with a temperature stick or pyrometer.

• Determine machine setup by reviewing work orders, tooling usage instructions, and die setup charts, making adjustments as required.

• Load and secure dies into the press, checking for defects and torquing as necessary.

• Examine tools, dies, and fixtures for damage, separating them using appropriate handling procedures.

• Set up press cycle programs using control panels or manual switches to adjust height, stroke, pressure, and cycle time.

• Develop patterns when necessary, cutting and tailoring materials like fiberglass and graphite to die requirements.

• Perform pull-outs on various types of metal and alloy tubes using a hydraulic tube pull-out machine.

• Verify that materials are free from burrs and debris, using hand deburring tools and denatured alcohol prior to forming operations.

• Consult with Team Lead and other personnel (e.g., engineering, planning, inspection) on process or job-related issues as required.

• Maintain a written tie-in book or electronic communication to coordinate with other shifts and dispose of hazardous materials in an approved manner.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 120.62 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 1+ Years of experience setting and using precision measuring tools; equipment such as micrometers, calipers, and/or dial indicators?

• 1+ Years of experience reading blueprints and structural drawings.

• 1+ Years of experience operating a hydraulic press.

• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.

Preferred Qualifications:

• Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.

• Ability to work in noisy environments while completing tasks.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Tool & Die Maker to join our Materials Management & Tooling team in Auburn and Renton, Washington.

In this hands-on position, you will be responsible for a variety of tasks, from interpreting blueprints and work orders to developing effective plans for tool fabrication and repair. Your skills will be essential in troubleshooting production challenges, operating advanced machinery, and ensuring that all tools meet stringent quality standards. Collaborating with cross-functional teams, you will also engage with customers and suppliers to address any functional issues, all while adhering to safety protocols and continuous improvement practices. If you are passionate about precision engineering and ready to make a significant impact in a fast-paced environment, we invite you to explore this exciting opportunity.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform all functions related to tool fabrication, rework, and repair as required.

• Obtain work orders from the team leader or supervisor, determining assignments based on schedule dates and tool availability.

• Read work orders and blueprints to identify required tasks, tools, and equipment.

• Develop plans for the fabrication, maintenance, and repair of tools.

• Initiate and coordinate engineering change requests with internal support groups when necessary.

• Determine the sequence of tool fabrication work, troubleshoot issues, and develop solutions to production challenges.

• Access and utilize appropriate tool drawings, models, and specifications using available computing systems.

• Select and verify necessary equipment from the shop storage area, ensuring current tool certification.

• Perform repairs or replacements on tools as per Standing Tool Order (STO) Production Requests, and request rework orders if necessary.

• Layout holes, lines, and other tool features, and install or modify hydraulic, pneumatic, and vacuum tubes as required.

• Operate various machinery, including power saws, drill presses, and CNC machines, to shape materials and prepare details.

• Move materials and equipment using Powered Industrial Trucks (PIT) and overhead cranes as needed.

• Maintain accurate records of orders and coordinate tooling information with other shifts and departments.

• Handle hazardous materials in compliance with Boeing procedures, using appropriate personal protective equipment.

• Engage in continuous improvement practices to enhance quality, safety, and efficiency in tool and die work.

• Use precision measuring instruments, such as micrometers and gauges, to ensure accuracy in fabrication and repairs.

• Interface with customers and suppliers to incorporate changes or resolve functional and installation issues.

• Submit completed jobs to Quality Assurance and assist inspectors in performing necessary checks or measurements.

• Utilize mathematics, including algebra and trigonometry, to calculate dimensions and analyze Model Based Definition (MBD) for fabrication details.

• Conduct tool tryouts and make necessary adjustments to ensure production meets quality requirements and specifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• 5+ years of experience in repairing, maintaining, construction, and/or the inspection of tools, dies, jigs, powerfeed, etc.

• 5+ years of experience in machine shop processes, geometric dimensioning & tolerances, and machining capabilities of different types of materials.

• 2+ years of experience using complete set of toolmaker shop equipment (milling, lathe, precision, grinding, polishing, and fitting).

Preferred Qualifications:

• 5+ years of experience as a Tool & Die Maker.

• 2+ years of experience with hydraulics and pneumatics.

• Completed an approved Mold Maker or Tool and Die Maker state apprentice ship program and/or certified by the U.S.

• Ability to perform machining operations with a specified degree of accuracy and within a timely manner, maintain close and exacting tolerances and finish requirements ensuring highest quality workmanship on all tools, gages, and fixtures with minimal scrap.

• Capable of creating a repeatable setup and working to tolerances of +/-.0002" in controlled environment.

• Possesses 4 and 5 axis CNC skills for mill or lathe, and extensive knowledge of detail cutting tool geometry for different cutting tool types and materials.

• Ability to reverse engineer and manufacture mold components within time limitations

• Ability to read and write G and M code with CAM programming experience.

Conflict of Interest:

Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $40.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 31, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Tube, Duct, and Reservoir Assembler to join our Fabrication team in Algona and Auburn, Washington.

As an Assembler Weld & Duct, you will be at the forefront of our operations, transforming precision-engineered components into vital subassemblies for aircraft systems. Your expertise will ensure that every part is meticulously prepared, fitted, and aligned, contributing to the seamless integration of hydraulic, fuel, and oxygen systems. You will have the opportunity to work with cutting-edge tools and technologies, collaborating with a dedicated team to achieve exceptional results.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Verify kitted parts and assemblies against Work Orders (W/O) and Bills of Material (BOM) to ensure accuracy and quality.

• Obtain necessary engineering drawings for assigned jobs if not included with the order.

• Initiate planning or engineering change requests for pre-planned jobs as required.

• Set up assembly tools according to instructions and ensure correct locators for model configurations.

• Hand fit parts using jigs and tools to ensure proper alignment and fit.

• Prepare detail parts by trimming, sanding, and deburring as necessary to meet specifications.

• Deliver completed details to the appropriate work area for further processing.

• Select and utilize appropriate drills, reamers, and countersinking tools for hole preparation.

• Drill and ream holes in parts and assemblies according to drawing specifications.

• Apply sealants, primers, and adhesives as required by work orders and specifications.

• Handle and dispose of hazardous materials safely, following approved procedures.

• Obtain the correct type and size of fasteners from the roto-bin per specifications.

• Report job handicaps, such as errors in sequencing, parts, materials, and fabrication procedures.

• Measure and cut tubing to close tolerances, and swage tubing as necessary.

• Conduct in-process checks to ensure compliance with quality requirements and specifications and seek assistance from the team leader when needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience working with powered hand tools

• 1+ years of experience working with precision measuring tools

• Computer proficiency including Microsoft Office Suite

• 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division)

• 1+ years of experience working with detailed work instructions or reading and interpreting blueprints and drawings

• Ability to lift, push and pull up to 35 pounds frequently within an 8 hour shift

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 30, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We're looking for Pediatric Operating Room RNs for an immediate travel nurse opening in Tacoma, WA.

The right RN will have at least 1-2 years of recent acute care experience.

Read below for more requirements:

Pediatric Operating Room RNs will perform minor medical operations, advise patients and family on illnesses or injuries, and plan long-term care needs.

Other responsibilities of a Pediatric OR Travel Nurse include documenting medical history, checking for any allergies the patients might have, obtaining patients' vital signs, and monitoring patients' emotional and physical well-being.

As a Pediatric OR Travel Nurse, you should be prepared to perform the following tasks:Assist with moving and positioning of patient.Manage care of patient in the OR according to hospital policy.Ensure all patient paperwork is completed prior to procedure.Watch for signs and symptoms of impaired gas exchange related to anesthesia.Remain by the patient's side until anesthesia has been successfully induced.Pediatric OR Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty.

RNs should be able to easily lift 20 pounds.

Moving or lifting patients may require lifting of up to 50 pounds at a time.

RNs may face hazards from exposure to certain chemicals or infectious diseases in the operating room environment.Requirements
*: BLS, 5 Years
* Additional certifications may be required before beginning an assignment.