Jobs in Normandy Park Washington

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.  

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities: 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards: 

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. 

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee 

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. 

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:  

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:  

High school graduate or GED preferred. 

Relocation: 

This position offers relocation based on candidate eligibility. 

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Union Representation Statement:  

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. 

Shift:  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.    

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.    

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations.    

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Integral Fuel Cells to join our Quality team in Everett and Renton, Washington.

As an Inspector for Integral Fuel Cells, you will be crucial in maintaining the integrity and safety of our aircraft operations. This position requires working in confined spaces within the wing fuel cells, where employees must crawl through an opening of 9.5” x 17.7" to access the fuel cell. Your expertise will be vital in inspecting the cleaning, sealing, and coating processes, as well as conducting thorough leak checks to identify and resolve any issues. Collaborating closely with Engineering, Quality, and Manufacturing teams, you will implement improvements in build processes and drive initiatives for defect reduction. Certification for visual acuity and color perception may also be required. Your ability to use precision measuring instruments and interpret technical documentation will ensure that all components meet stringent specifications, allowing you to make a significant impact on our operations.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

• Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

• Inspect final assemblies, subassemblies, and installations of parts and systems for workmanship, fit, alignment, and conformance with applicable drawings and specifications.

• Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

• Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

• Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

• Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

• Perform in-process inspections, including checks for torque, sealant applications, and electrical bonding.

• Document any discrepancies and report them to the appropriate personnel for resolution.

• Verify that parts and assemblies have been properly cleaned and that sealants, primers, and finishes are applied per specifications.

• Witness and document functional tests of aircraft components and systems to detect leaks.

• Perform shakedown inspections on completed assemblies prior to customer acceptance, documenting any discrepancies.

• Maintain personal and tool certifications, ensuring compliance with operational standards.

• Assist and train other employees on inspection methods and procedures, providing guidance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 2+ years of experience as a Quality Inspector or in a related inspection role within a similar industry, such as, but not limited to, Aerospace and Manufacturing.

• Ability to work in confined spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Ability to complete Fall Protection Training.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to use a respirator or have been respirator certified.

• Proficiency in reading, writing, and speaking English. 

Preferred Qualifications:

• Experience working with precision measuring tools.

• Experience sealing

Conflict of Interest: 
Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $27.32/hour, with potential to earn up to $57.88/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Aug. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company is currently seeking Software Development Engineer (Associate or Mid Level) to support our Phantom Works Software teamlocated in Tukwila, Washington. This position will focus on supporting the Boeing Defense, Space & Security (BDS) Software Engineering organization. 

The Boeing Company is looking for a Software Engineer to join the Phantom Works Open Architecture Systems Integrated Software (OASIS) Solutions team located in Tukwila, Washington. This position will focus on supporting the Boeing Defense, Space & Security (BDS) Software Engineering organization.  Phantom Works is an advanced research and development organization responsible for engaging customers through cutting-edge visual modeling and simulation; innovating cross-cutting concepts and technologies; prototyping solutions to extend current products and win new programs; and developing new businesses and entering new markets. The organization is seeking software engineers to perform software design and development for projects such as Software Defined Networking for the Department of Air Force Battle Network; Software Defined Radios; and Ground Station software for Uncrewed Aerial Vehicles.

The selected team member enjoys working collaboratively with others, has a commitment to customer satisfaction and process improvement, and is successful working in a multi-contract/multi-program environment. He/she will support the development of solutions to a wide range of complex problems that require ingenuity and innovation. He/she should be adaptable to new development environments and eager to work with and learn new technologies.

Our teams are currently hiring for a broad range of experience levels including Associate and Mid Level Software Engineers. 

Position Responsibilities:  

• Designs, develops, tests, and maintains non-embedded software throughout the end-to-end lifecycle that meets industry, customer, safety, and regulation standards.
• Reviews, analyzes, and translates customer requirements into initial design of software products.
• Develops, maintains, enhances and optimizes software products and functionalities for systems integrations.
• Develops, documents and maintains architectures, requirements, algorithms, interfaces and designs for software products.
• Debugs and resolves issues identified to ensure the reliability and efficiency of software products.
• Handles user inquiries, troubleshoots technical issues and user feedback analysis.
• Implements current and emerging technologies, tools, frameworks and changes in regulations relevant to software development.
• Develops, establishes, monitors and improves software processes, tools and key performance metrics that align projects with organizational goals and industry benchmarks.
• Executes and documents software research and development projects.
• Advises on software domains, system-specific issues, processes and regulations.
• Performs software project management activities and software supplier management functions.
• Tracks and evaluates software team and supplier performance to ensure product and process compliance to project plans and industry standards.

Basic Qualifications (Required Skills/ Experience): 

• Bachelor's Degree in Engineering

• 2+ years of experience with programming in C++ or Java 

• 2+ years of experience working with agile teams and agile software development 

• 2+ years of experience with the SDLC (Software/Systems Development Lifecycle) 

• Ability to obtain Secret US Security clearance (Post-Start) and Special Access Programs

Preferred Qualifications (Desired Skills/Experience): 

• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science

• Active Secret/Top Secret U.S. Security Clearance
• Experience at system level with aerospace systems.

• Experience with embedded systems

• Experience with software development tools such as Jira, Git and Jenkins and CMake
• Experience with Linux and Windows development
• Familiarity with Link 16, MADL, and/or IP based networking.
• Familiarity with the OMS/UCI systems architecture and common messaging set.
• Familiarity with AMS-GRA and/or the A-GRA government reference architectures.
• Familiarity with modeling in Cameo.

Travel:  

10% 

Drug Free Workplace: 

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

CodeVue Coding Challenge:   

To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Pay & Benefits:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. 

Pay is based upon candidate experience and qualifications, as well as market and business considerations.   

Summary pay range for Associate Level: $106,250 -$143,750 

Summary pay range for Mid Level: $135,150- $182,850 

Applications for this position will be accepted until Mar. 27, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team. In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements. Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities

• Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.

• Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.

• Conduct continuity checks to ensure proper functionality of electrical systems.

• Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.

• Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling. Typically assigned work that has been previously sequenced.

• Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.

• Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.

• Perform hand forming of electrical wiring and soldering as required to complete work assignments.

• Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.

• Execute necessary riveting tasks as part of the assembly process.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in electrical assembly installation.

• 1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).

• 1+ years of experience handling chemicals and/or hazardous materials.

• Ability to recognize colors.

• Ability to work in confined spaces.

• Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:

• 1+ years of experience as an Electrician or Apprentice.

• Completion of an electrical trade school program or have military related electrical experience.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul. 09, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is seeking Senior Assembly Advisement Workplace Coaches (Level 4) to join 737 Skill Enhancement Center team located in Renton, Washington.

Position Responsibilities:

• Uses manufacturing and assembly experience in one or more of these areas: mechanical, fluids/pneumatics, electrical integration, quality inspection, machine operations for coaching, performance improvement and problem solving in support of the Boeing Production System

• Analyze and interpret performance and quality data to identify and mitigate the impact of changes on the production system. (e.g. CMES, CORRS, PAS, EPES, TMC, Velocity, Webart)

• Conduct assessments of processes and practices, analyzes and interprets data for improvement opportunities

• Provide feedback on assessment results and find opportunities for improvement and potential areas of risk

• Analyze processes and support Boeing Production System problem solving, develop and document innovative solutions in support of area Q.C.D.S.M. goals

• Assist M&Q managers and team leads with Structured On the Job Training (SOJT) plans

• Support training and coaching solutions to improve employee performance

• Provide Subject Matter Experts for specific M&Q Skills/Disciplines

• Provide instruction, positive modeling, and opportunities for observation in order to help team members and employees. Encourage questions to ensure understanding. Gives timely, appropriate feedback on performance when coaching. Reinforces efforts and progress

• Clarify expected behavior, knowledge, and level of proficiency by seeking, giving information, and checking for understanding

• Establish good interpersonal relationships by helping team members and making internal employees feel valued, appreciated, and included in discussions

• Work at the appropriate level in the organization to implement strategies and plans

• Self-sufficiency, working under minimal direction

Basic Qualifications (Required Skills/Experience):

• 5+ years of experience with Structures Assembly, Mechanical Assembly, Electrical Assembly, and/or Final Assembly

• 10+ years of experience working in a manufacturing environment

• Ability to work 2nd shift

Preferred Qualifications (Desired Skills/Experience):

• 10+ years of experience with aircraft assembly processes, performing hands-on installation and/or assembly is desired (or an equivalent combination of education and experience as outlined above)

• Demonstrated knowledge and expertise in aircraft assembly and inspection processes is critical

• Experience and proficiency reading and interpreting blueprints, drawings, specifications, and templates

• Proficiency with MS Office applications

• Excellent analytical, communication, and problem-solving skills

• Possess manufacturing experience in one or more of the following areas:

  • Mechanical

  • Fluids/Pneumatics

  • Electrical Integration

  • Structures

Drug Free Workplace: 

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Shift:  

This position is for 2nd shift. 

Total Rewards: 

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. 

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $112,000 to $135,000

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This is not an Export Control position.

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 2nd shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Aircraft Structures Mechanic to join our Join and Installation team in Everett and Renton, Washington.

As an Aircraft Structures Mechanic, you will utilize your manufacturing knowledge to set up tools and equipment for drilling and fastening complex structures, including composite materials. You will operate various hand and machine tools, including automated equipment, to perform tasks according to specifications while ensuring safety and quality standards. Your responsibilities will include recognizing and reporting any equipment malfunctions, performing maintenance, and coordinating the movement of materials and tools. You will also cut, assemble, and install components, verify your work against specifications, and handle hazardous materials safely.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Review daily reports and consult with team leaders to determine job assignments and obtain necessary documentation.

• Locate work areas using specified drawings and paperwork.

• Verify kitted parts against installation plans and bill of materials, ensuring they are suitable and defect-free.

• Retrieve non-kitted parts from designated areas, ensuring compliance with specifications.

• Use electronic devices to access work instructions and engineering data (personal cell phones not permitted).

• Select and utilize appropriate hand and power tools for assembly tasks, including precision alignment equipment.

• Move kits, carts, and equipment within the work cell as needed.

• Load/unload jigs and operate mechanical lifts for assembly work.

• Locate tools and parts on aircraft using specified methods and set up assembly tools per instructions.

• Handle hazardous materials safely and dispose of them properly.

• Inspect completed work for defects and cleanliness before submission for inspection.

• Perform minor rework and maintain tool control in accordance with procedures.

• Maintain personal and tool certifications and seek assistance from supervisors when necessary.

• Set up tools and equipment for drilling and fastener installation in complex structures.

• Operate various hand and machine tools, monitoring equipment functionality and performing routine maintenance.

• Coordinate the movement and preparation of materials and tools for tasks.

• Cut, file, drill, and assemble parts, ensuring proper fitting and quality standards.

• Conduct reaming, riveting, and sealing operations, applying corrosion inhibitors as needed.

• Utilize calibrated tools to verify work against specifications and ensure quality.

• Manage equipment and materials within the work cell to ensure efficient workflow.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.

Basic Qualifications:

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This positions requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.  

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Defense, Space and Security (BDS) is seeking an Associate Government & Capital Property Specialist to support the Property Management team in Tukwila or Des Moines, Washington.  

The Associate Government & Capital Property Specialist will support the lifecycle management of Government Property. Integrating with functional groups across the business and supporting cross functional teams with processes and procedures that support a healthy Property Management System.

This position provides an opportunity to directly support a variety of customers both internal and external to Boeing, including the franchise P-8A Poseidon and KC-46A Pegasus programs. position is in an environment that is often fast-paced and requires the ability to manage competing schedules and be responsive to varied customer needs. To be successful in this role requires customer focus, strong attention to detail, and the ability to learn and implement new skills quickly. Continuous process improvement is critical, and candidates must be able to execute existing processes while proactively identifying ways to improve them.

Position Responsibilities:  

• Administers the terms of contract provisions that specify the company's obligations to acquire, control, use, care for, report and dispose of property
• Assists in performing audits, documenting processes and procedures and investigating and reporting lost or damaged property
• Learns to determine property acquisition requirements, product availability and authority to fulfill company, program or contractual obligations
• Uses off-the-shelf software or Boeing system tools to manage and communicate property information and to establish property records for company or government property
• Maintains accountability from initial acquisition to final disposition by coordinating, preparing and documenting applicable forms to indicate a change of ownership, accountability or location of property in accordance with applicable government regulations, customer contracts or corporate policy
• Conducts physical inventory of property and reconciles results to ensure compliance with regulations
• Assists in verifying that property records accurately reflect inventory on hand and that equipment servicing requirements are established by responsible organizations
• Learns to confirm that service work is scheduled and performed in accordance with applicable government regulations, customer contracts, corporate policy or recommended industry standards
• Learns how to determine when property is allowable, reasonable, allocable and utilized in accordance with company or contract requirements
• Performs disposition of property identified by company, legal or contractual requirements
• Assists with inventory adjustments, liability determinations and title issues
• Handles basic property related activities at completion or termination of contract

Basic Qualifications (Required Skills/Experience):

• 1+ years of experience collecting and analyzing data from multiple sources, as well as interpreting data and presenting analysis and recommendations to management
• 1+ years of experience demonstrating exceptional business, analytical, and problem solving skills
• Proficiency with Microsoft Office Products such as Outlook, PowerPoint, Excel, and Word

Preferred Qualifications (Desired Skills/Experience):

• 1+ year of experience working in a computer based inventory management system or warehouse management system
• Bachelor’s degree or higher
• Experience managing Government property
• Experience working with the US Government acquisition process
• National Property Management Association (NPMA) Certification

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Total Rewards:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $74,800 – $101,200

Applications for this position will be accepted until Mar. 24, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is looking for Senior Quality Workplace Coaches to join the Composite Manufacturing Center based out of Renton, Washington.

Our team is currently hiring for a broad range of experienced levels, including Experienced and Senior Quality Workplace Coaches.

The QWPC team is looking for enthusiastic Quality Workplace Coaches who are passionate about motivating and inspiring others. In this role, you will support quality inspectors and manage Structured On-The-Job activities. Ideal candidates will be Subject Matter Experts (SMEs) in inspection methods and quality processes, with hands-on experience and proficiency in Non-Conformance Record (NCR) writing. Strong collaboration, coaching, and leadership skills are essential, along with a genuine ability to connect with others. Our motto is, “We Make People Awesome.” We offer a collaborative culture with flexible scheduling, minimal overtime, and lower physical demands.

Position Responsibilities:

• Able to coach Quality inspectors on best practices in inspection techniques and performance improvement, utilizing expertise in quality manufacturing and assembly across various areas such as Structures, Seal, Flightline processes, Functional Test, Wings, Interiors, Electrical, WIRS, NCR Tag Writing, Hydraulics, Engines, Paint, Systems, Final Assembly, Plumbing and PDD (including but not limited to REDARS, PSDS, ONEPPPM, D Documents Navigation), to enhance coaching, performance improvement, and problem solving in support of the Boeing Production System

• Analyzes and interprets performance and quality data (e.g. CMES, PAS, EPES, TMC) to identify improvement opportunities

• Analyzes processes and supports problem solving, develops, communicates and documents innovative solutions in support of area quality goals

• Assists Quality managers and team leads with Structured On-the-Job Training (SOJT) plans and provides program/job specific advanced skills coaching

• Offers Subject Matter Expertise for specific Quality skills through Workplace Coaching

• Provides coaching, positive modeling, and observation opportunities to help team members excel

• Encourages questions to ensure understanding and gives timely feedback on performance

• Reinforces efforts and progress while clarifying expected behaviors, knowledge, and proficiency levels

• Fosters good interpersonal relationships through helping team members feel valued, appreciated and included in discussions

Basic Qualifications (Required Skills/Experience):

• 5+ years of experience in manufacturing operations, quality, or other related field

• 5+ years of experience in quality inspection and/or auditing

• 5+ years of experience working or inspecting non-conformance work orders

• 2+ years of experience mentoring, coaching, guiding, and leading teams

Preferred Qualifications (Desired Skills/Experience):

• 10 + years of related work experience or an equivalent combination of education and experience

• Quality inspection experience in three or more of these areas: Quality inspection in Structures, Seal, Flightline processes, Functional Test, Wings, Interiors, Electrical, WIRS, NCR Tag Writing, Hydraulics, Engines, Paint, Systems, Final Assembly, Plumbing and PDD (including but not limited to REDARS, PSDS, ONEPPPM, D Documents Navigation), to enhance coaching, performance improvement, and problem solving in support of the Boeing Production System

• Proficiency with MS Office applications

• Excellent analytical, communication and problem-solving skills

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This position is for 1st and/or 2nd shift.

Total Rewards:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

Experienced (Level 3): $103,000 - $125,000

Senior (Level 4): $126,000 - $154,000

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This is not an Export Control position.

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing is seeking an Aviation Maintenance Technician and Inspector, who holds an active secret or higher security clearance, to perform maintenance, preventative maintenance and alterations on production during and post flight test activities in support of our KC-46 Tanker in Tukwila, WA.

Position Responsibilities:

• Troubleshoot, inspect, test, repair, service aircraft and engine systems to prepare aircraft for flight.

• Perform Quality functions such as Customer and DCMA Coordination, Configuration Change Verification, Conformity Inspections, Airworthiness Inspections (including Pre-flight and Post-flights), Corrective Action and Investigations.

• Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures.

• Perform Aviation Maintenance Technician Inspector tasks in order to obtain and maintain knowledge, skills and required certifications.

• Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures.

• Perform audit/surveillance of all manufacturing and quality assurance processes, according to specifications, processes, and procedures.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location.

This position requires an Active Secret U.S. Security Clearance. (A U.S. Security Clearance that has been active in the past 24 months is considered active.)

Basic Qualifications (Required Skills/Experience):

• Minimum 3 years of aircraft maintenance experience with military, airline or certificated repair station background.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.

• Must be able to work any shift and overtime as required

Preferred Qualifications (Desired Skills/Experience):

• Prefer a valid FAA Airframe and Powerplant Certificate preferred. Please note your certificate number on your resume if you are certified.

• Preferred experience in and/or education in Flight Controls, Avionics electronics/systems, and Analysis.

• Prior military experience and working with military customers

Relocation:

This position offers relocation based on candidate eligibility.

Shift:

This position is for 2nd shift (Subject to change)

Additional Information:

This is an hourly position governed by the International Association of Machinist (IAM-751) Collective Bargaining agreement.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards Statement:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. 

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. 

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only.  Salaries are based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range: $35.32/hr. - $62.45/hr.

Candidates must before March 27th, 2026 to be considered for the position

Applications for this position will be accepted until Mar. 27, 2026

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 2nd shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton, Washington.

As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes. Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests. You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components. Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
• Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
• Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
• Load sealing guns and clean sealing equipment, ensuring proper functionality.
• Hand mix sealant as required and perform rework or pickups on assigned assemblies.
• Assist with pressure testing operations as assigned.
• Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
• Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
• Keep supervisors informed of progress and coordinate information with employees on other shifts.
• Mask areas as required to facilitate corrosion removal or painting operations.
• Prepare fuel vents for leak tests and restore them to normal after testing.
• Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
• Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience with paints, coatings, finishes, and/or sealants.

• Experience in handling chemicals and/or hazardous materials.

• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• Experience working from heights & using fall protection equipment with weight limitations.

• Experience with safety process and/or procedures in a manufacturing or operations environment.

• Experience working with tools and following work instructions.

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

• Completed 1+ year of aerospace sealing in high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.  

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray A -Major Assemblies to join our Joint and Installation team in Everett and Renton, Washington.

As a Painter Spray A - Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft. Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish. You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements. Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment. Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.

• Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.

• Prepare surfaces to ensure proper adhesion, including corrosion removal and paint stripping as needed.

• Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.

• Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.

• Mask and unmask areas to facilitate corrosion removal or painting operations.

• Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.

• Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.

• Operate automated spray equipment, such as robots, for preparation and painting tasks.

• Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.

• Monitor and maintain time-sensitive materials and processes throughout the painting operation.

• Support customer inspections as required and screen work instructions to ensure proper workflow.

• Apply decals, part markings, and wrap finished parts or assemblies as required.

• Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.

• Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.

Basic Qualifications:

• 1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

• 1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.

• 1+ years of experience mixing paints.

• 1+ years experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• 1+ years of experience handling chemicals and/or hazardous materials

• Experience working from heights & using fall protection equipment with weight limitations.

Preferred Qualifications:

• 1+ year of experience performing aircraft or autobody painting and finishing operations.

• Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing BGS is currently looking for a Retrofit Technical Specialist (Retrofit & Repair) Level 3 candidate for our P-8 Retrofit Engineering Team, whose mission is to provide modification, retrofit, and support for the P-8 aircraft.  Our vision is to provide world class, high quality, and timely Retrofit Planning, Time Compliance Technical Order and Retrofit Installation Instruction Authoring, Retrofit Project Management, Validation and Verification, Retrofit Kit Management and Installation Support.  The Boeing Company’s P-8 Retrofit Team requires a retrofit and repair technical specialist to assist with the authoring of Technical Directives (TDs) and Installation Data Packages (IDPs) for the installation of new modifications on the in-service aircraft, as well as mod-site support for the P-8 programs.

This position is expected to be 100% onsite.  The selected candidate will be required to work onsite at the Tukwila, WA facility.

Position Overview:

Leads definition and development of retrofit technical documents detailing retrofit modifications and installations.  Develops estimates and analyses for complex modifications involving multiple impacted systems or platform configurations.  Collaborates with internal functions to resolve issues such as parts and material obsolescence.  Leads retrofit kit first article quality validation/verification activities.  Manages kit delivery schedule, plans performance and initiates remedial action.  Provides on-site support of complex retrofit installations related to maintenance, modifications, and repairs based on established customer, regulatory, and company requirements.

Position Responsibilities:

• Knowledge to research delivered and previously modified product configuration (e.g., aircraft, spacecraft, support/test equipment) and ability to develop all material requirements.

• Knowledge of location and use of resource data (e.g., company and vendor design resources, standard parts, process and specifications

• Research and analyze engineering data to develop and evaluate retrofit/repair product configurations.

• Develops and defines customer retrofit/repair requirements.

• Creates/authors retrofit technical documents and retrofit installation data packages.

• Writes technical documents with clear, concise technical prose

• Identifies and defines requirements for retrofit kit definition, development and delivery.

• Reviews engineering data packages to determine configuration requirements. Identifies required parts, materials and consumables.

• Provides technical resolution for retrofit and modification related problems.

• Validates engineering bill of materials and analyzes gaps.

• Defines configuration requirements and creates an installable modification package. 

• Supports internal and external customers.

• Develop estimates and analyses for retrofit projects.

• Analyzes and resolves modification procedures and parts/material issues.

• Supports certification and verification/validation efforts as needed.

• Support of MOD lines

This position requires the ability to obtain an active U.S. Security Clearance.  An interim and/or final U.S. Secret Clearance Post-Start is required.

Required Qualifications:

• 3+ years of reading and understanding engineering blueprints/drawings.

• 3+ years’ experience with Microsoft Office Products like Outlook, PowerPoint, Excel, and Word

• 1 to 2 years’ experience with analyzing and interpreting engineering data for inclusion into maintenance manuals and technical publications

• Candidate must have 1 to 2 years of P-8 aircraft experience.

• Knowledge of researching design resources, standard parts, process specs to research previously modified product configurations.

• Knowledge of retrofit kitting process

• Ability to write clear, concise technical prose, as well as apply technical knowledge and knowledge of fundamental writing skills for a variety of technical publications.

Preferred Qualifications:

• 1+ years’ experience working on military or commercial aircraft

• Bachelor of Science degree from an accredited course of study, in engineering, computer science, aviation, aerospace.

• Experience with the P-8 aircraft maintenance

• Experience working with drawings that define the engineering, special engineering, special tooling, retrofit kit packaging, independent work packages and material requirements for accomplishment of inspections, modifications, improvement changes, and repairs of delivered products.

• Experience authoring Technical Directives and/or Installation Data Packages.

• Experience in Retrofit Modifications.

• Experience working in BIRKS, REDARs, PSDS, RCS.

Typical Education/Experience:

• Education/experience typically acquired through advanced technical education (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience. (e.g. PhD, Master+3 years' related work experience, 9 years' related work experience, etc.

Shift:

This position is for 1st shift

Relocation:

Relocation assistance is not a negotiable benefit for this position.  Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:                        102,850 – 139,150

Applications for this position will be accepted until Mar. 20, 2026

Export Control Requirements:

This is not an Export Control position.

Relocation

Relocation assistance is not a negotiable benefit for this position.

Security Clearance

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Numerical Control Multiple Tool - Milling Machine Operator to join our Fabrication team in Everett and Renton, Washington.

As a Numerical Control Multiple Tool-Milling Machine Operator, your role will involve operating advanced milling machines with precision, ensuring that all components are produced to the highest standards. You will be responsible for maintaining a safe working environment by adhering to established safety protocols and best practices while preparing and adjusting machinery for optimal performance. Your attention to detail and ability to interpret technical documents will be essential in ensuring that every part meets stringent specifications.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Set up, operate, and adjust numerically controlled milling machines, utilizing various control media, program documents, holding fixtures, and cutting tools, or manually entering required data to meet quality requirements

• Obtain information from drawings, documents, sketches, and verbal instructions to prepare for machining operations

• Make necessary preparations and adjustments to ready the machine for operation, including installing various cutting tools during machining cycles as authorized

• Use measuring instruments and gauges to check cutting tools and parts for conformance to specifications and prints

• Assist planners or programmers in determining the final numerical control program as authorized

• Mount and check cutting tools in holders, ensuring proper loading in machine magazines or spindles

• Initiate requests for corrective action in the event of machine malfunctions and detect faulty tools, taking corrective action in accordance with shop practices

• Load, preload, and manually position fixtures at designated program stops

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting

• Work in environments that may involve contact with metals, solvents, and coolants

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ Years of experience using precision measuring tools

• 1+ Years of experience as a machine operator, writing and editing CNC programs

• 1+ Years of experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications

• 1+ Years of experience reading and interpreting blueprint and assembly instructions or drawings

• 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools

• Ability to lift, push, and pull up to 35 pounds

Preferred Qualifications:

• Experience working with and around hazardous materials (while using the proper protective equipment)

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with the potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician to join our Electronics team in Auburn & Puyallup, Washington.

In this role, you will be empowered to apply your technical expertise and creativity to solve complex challenges in cutting-edge aerospace technology. You'll work with a diverse team to develop, test, and maintain advanced electronic systems that are critical to the success of our aircraft. This position offers a dynamic environment where innovation, precision, and continuous learning are valued, giving you the chance to grow your skills while making a tangible impact on aviation excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform electronic and software testing, diagnosis, troubleshooting, adjustment, repair, calibration, checkout, and maintenance of electronic systems and associated equipment, often developing and improvising service procedures as needed.
• Fabricate, assemble, and test developmental and prototype mechanical, electrical, electromechanical, and electronic assemblies, including those utilizing software/firmware applications.
• Lead, instruct, and review the work of employees in lower classifications assigned to fabricate, assemble, test, calibrate, repair, modify, maintain, and service electronic equipment and systems.
• Operate and utilize test equipment, instruments, tools, and machines required to complete work assignments.
• Interpret and work from block diagrams, schematic diagrams, prints, specifications, technical information, manufacturing records, sketches, and verbal instructions.
• Perform design and fabrication work related to packaging developmental assemblies, including mechanical and assembly fabrication, with engineering assistance.
• Maintain certifications, licenses, and permits necessary for work assignments.
• Prepare reports, maintain records, and ensure accountability of contract tools and test equipment.
• Devise and build temporary tools and work-around methods to facilitate troubleshooting and repair.
• Handle and protect components and assemblies in accordance with shop practices, procedures, and drawing requirements.
• Prioritize work assignments as directed by leads or supervisors and obtain necessary engineering drawings and test documents when not provided.
• Set up and perform bench or automatic tests per work orders, test documents, equipment manuals, and engineering instructions.
• Troubleshoot faults in electronic circuits and hardware, adjusting, repairing, or replacing components as required.
• Select and use appropriate hand, power, and bench tools to perform required operations.
• Maintain test equipment through periodic maintenance and monitor certification dates.
• Troubleshoot and repair computerized test systems.
• Handle and dispose of hazardous materials safely, following Safety Data Sheets (SDS) and using personal protective equipment.
• Pack electronic equipment for travel according to drawings and Boeing specifications.
• Verify work quality after each operation to ensure compliance with drawings and standards.
• Prepare completed or reworked jobs for inspection.
• Communicate with leads, supervisors, engineers, or planners when assistance or clarification is needed, especially regarding drawings, paperwork, or discrepancies.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 120.62 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications:

• Ability to lift, push, and pull up to 35 pounds.
• 3+ years of experience using electronic test equipment.
• 3+ years of hands-on experience with power and control electronics circuit design, product design and manufacturing.
• 3+ years of experience testing and troubleshooting electronics and electrical systems.

Preferred Qualifications:

• UL Certified Electrician.

Conflict of Interest:

Successful candidates for this job must successfully satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $33.32/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 27, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Want to make extra money on YOUR schedule? Join our exclusive list of research study participants and start earning extra income today!

Perfect for anyone seeking remote, part-time, or temporary work, these opportunities require no previous experience and offer unmatched flexibility. Choose the studies that suit you best—whether online, in-person, or over the phone—and get paid for sharing your opinions.

Don't miss out on this chance to turn your free time into valuable earnings!

Participants are needed on a wide range of topics such as:

• Health Issues (Research for cures and new medications to treat ailments)
• Consumer Products (Your experience with consumer products)
• Shopping (Shopping experiences)
• Internet Usage (How you use the internet)
• Vehicles (recreational vehicles and automobiles)
• Employment (Various types of jobs or career fields)
• Food & Beverages (the consumption of various foods and beverages)
• Entertainment (About TV, movies or video games)
• Social Media (the use of different social media platforms)
• Financial (Banking and investing)
• Retirement (Planning what, when and how)
• Gender (studies based on your gender)
• Housing (Renters or Homeowners)

Compensation:

• Earn up to $250+ in Just ONE Hour! (Focus Group Session)
• Earn up to $3,000+ (Multi-Session Studies)

Benefits:

• Flexibility to take part in discussions online or in-person.
• No commute needed if you choose to work from home.
• No minimum hours. You can do this part-time or full-time
• Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products.
• You get to review and use new products or services before they are launched to the public.

Qualifications:

• Speak and/or read English
• Must be 18yrs old or older
• Must have either a phone, computer or tablet with internet connection

Experience:

• Start Immediately - No Experience Needed! Anyone Can Participate!

Education:

• Open to all education levels - Your opinion matters!

Want to make extra money on YOUR schedule? Join our exclusive list of research study participants and start earning extra income today!

Perfect for anyone seeking remote, part-time, or temporary work, these opportunities require no previous experience and offer unmatched flexibility. Choose the studies that suit you best—whether online, in-person, or over the phone—and get paid for sharing your opinions.

Don't miss out on this chance to turn your free time into valuable earnings!

Participants are needed on a wide range of topics such as:

• Health Issues (Research for cures and new medications to treat ailments)
• Consumer Products (Your experience with consumer products)
• Shopping (Shopping experiences)
• Internet Usage (How you use the internet)
• Vehicles (recreational vehicles and automobiles)
• Employment (Various types of jobs or career fields)
• Food & Beverages (the consumption of various foods and beverages)
• Entertainment (About TV, movies or video games)
• Social Media (the use of different social media platforms)
• Financial (Banking and investing)
• Retirement (Planning what, when and how)
• Gender (studies based on your gender)
• Housing (Renters or Homeowners)

Compensation:

• Earn up to $250+ in Just ONE Hour! (Focus Group Session)
• Earn up to $3,000+ (Multi-Session Studies)

Benefits:

• Flexibility to take part in discussions online or in-person.
• No commute needed if you choose to work from home.
• No minimum hours. You can do this part-time or full-time
• Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products.
• You get to review and use new products or services before they are launched to the public.

Qualifications:

• Speak and/or read English
• Must be 18yrs old or older
• Must have either a phone, computer or tablet with internet connection

Experience:

• Start Immediately - No Experience Needed! Anyone Can Participate!

Education:

• Open to all education levels - Your opinion matters!