Jobs in New Orleans Remote

Border Patrol Agent (BPA) – in the Federal Security and Public Safety Sector (Entry Level)

If you’re looking for “just a job,” then stop reading right now. But, if you’re looking for a long-term federal law enforcement career, one that makes a difference every day to our country and its citizens, then the U.S. Border Patrol (USBP) would like you to take the first step to becoming an entry level Border Patrol Agent.

USBP is hiring immediately to fill full-time, entry-level, career positions in federal law enforcement where your prior experience in public safety, security, military police or law enforcement may qualify. Train and work with an elite team of professionals whose camaraderie, pride, and sense of purpose are hallmarks of their daily mission of protecting America.

Now is the time to make your move because, along with excellent base pay, exceptional benefits, and job stability, USBP is offering up to $60,000 in additional incentives (see details below).

Salary and Benefits

Annual base salary for newly appointed BPAs varies per grade, as follows: GL-5/GL-7 $51,632 - $92,219 per year. Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102) will be eligible for up to $20,000 in incentives. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location such as Sierra Blanca, Presidio, Sanderson, Comstock, Freer or Hebbronville, TX; Lordsburg, NM; or Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duty Locations

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.   

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates’ first-choice preferences. Relocation may be required.

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Duty Locations: You will be asked to select your preferred location for one of the following mission critical locations:

• Big Bend Sector Stations - *Presidio, Van Horn, *Sanderson, Alpine, *Sierra Blanca, Marfa
• Buffalo Sector Stations - Wellesley Island
• Del Rio Sector Stations - Del Rio, Brackettville, *Comstock, Eagle Pass North, Eagle Pass South, Carrizo Springs, Uvalde
• El Paso Sector Stations - Alamogordo, Clint, Deming, El Paso, Fort Hancock, Las Cruces, *Lordsburg, Santa Teresa, Ysleta
• El Centro Sector Stations - El Centro, Indio, Calexico
• Grand Forks Sector Stations - Pembina
• Havre Sector Stations - Havre, Malta, Plentywood, Scobey, Sweetgrass
• Houlton Sector Stations - Calais, Fort Fairfield, Jackman, Rangeley, Van Buren
• Laredo Sector Stations - Laredo South, Cotulla, *Hebbronville, Laredo West, *Freer, Laredo North, Zapata
• Rio Grande Valley Sector Stations - Rio Grande City, Fort Brown, McAllen, Brownsville, Falfurrias, Weslaco, Kingsville, Harlingen
• San Diego Sector Stations - Boulevard, Brownfield, Campo, Chula Vista, Imperial Beach, Murrieta, San Clemente
• Spokane Sector Stations - Colville, Curlew, Metaline Falls, Oroville
• Swanton Sector Stations - Beecher Falls, Burke, Champlain, Newport, Richford
• Tucson Sector Stations - *Ajo, Tucson, Nogales, Douglas, Brian A Terry, Sonoita, Casa Grande, Three Points Substation, Willcox
• Yuma Sector Stations - Blythe, Yuma, Wellton

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation’s economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

• Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
• Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
• Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
• Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
• Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

• Make sound judgments and decisions in the use of firearms.
• Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
• Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans’ Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply:

Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You’ll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government’s official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.

If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.

As a subscriber to the CBP Talent Network, you’ll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Company Description

EHNS Partners, LLC is an environmental, health, and safety consulting firm dedicated to providing tailored and comprehensive EHS solutions to meet client needs. With a small but highly skilled team, we emphasize responsiveness and trust to foster long-lasting partnerships with our clients. We are dedicated to providing in-depth technical knowledge and expertise in the implementation of environmental, health, and safety regulations across a multitude of sectors.

Role Description

The Environment, Health, and Safety (EHS) Manager will be responsible for leading environmental, health, and safety for a research facility located in New Orleans, LA. Main responsibilities include leading and maintaining comprehensive EHS operations and programs and ensuring compliance with all applicable regulations. This role also includes delivering EHS trainings, conducting occupational safety assessments, managing accident investigations, and ensuring implementation of EHS best practices.

Qualifications

• Proven knowledge and experience in Environmental Health and Safety compliance and management systems, preferably in a laboratory-based organization.
• Strong knowledge of EHS regulations, laws, and standards.
• Bachelor's degree in Environmental Science, Engineering, Occupational Safety, Industrial Hygiene, or a related field; relevant certifications (e.g., CSP, CIH) are a plus.
• Expertise in Accident Investigation to identify root causes and implement preventive measures.
• Experience in designing and delivering training programs related to environmental, health, and safety topics.
• Strong analytical, organizational, and leadership skills with great attention to detail.
• A high level of initiative, self-motivation, and accountability.
• Excellent communication skills for effectively partnering with teams and stakeholders.
• Proficiency in understanding and applying environmental, health, and safety regulations.

• Assist with event setup, coordination, and breakdown
• Greet and engage with event attendees
• Distribute promotional materials and provide information
• Maintain organized and welcoming event spaces
• Support event team with on-site tasks
  
  

• Strong communication and interpersonal skills
• Friendly and outgoing personality
• Ability to work in fast-paced environments
• Reliable and punctual
• Team-oriented mindset
• Flexible availability for events
  
  

• Competitive salary package ($48,000 – $52,000 per year)
• Opportunities for professional growth and career advancement
• Hands-on training and skill development
• Supportive and collaborative work environment
• Stable full-time position with long-term potential

Who We Are

At Loyola Medicine, we are driven by a mission to serve. As part of a nationally recognized, faith‑based healthcare system, we are committed to becoming the most trusted partner in the health of our communities and each person we serve.

Join a team that values compassion, clinical excellence, continuous learning, and collaboration.

Why You’ll Love This Role

• Work with cutting‑edge cardiac and vascular imaging technology in a high‑acuity hybrid OR/Cath Lab
• Join a supportive, experienced team dedicated to exceptional patient care
• Opportunity to train into a specialized cardiovascular role—new Radiologic Technologists encouraged to apply
• Grow your skills in a department known for clinical excellence, teamwork, and continuous learning

What You’ll Do

• Support diagnostic and interventional cardiac and peripheral vascular procedures following sterile technique
• Operate fluoroscopy, C‑arm, PACS, and hemodynamic monitoring systems
• Prepare procedure rooms, position patients, and ensure safe and accurate imaging
• Assist physicians during Cath Lab cases, monitor vital signs, and contribute to optimal procedural flow
• Participate in the on‑call rotation, supporting emergent cases when needed

Schedule

• PRN / Registry
• 7:00am–3:30pm
• Flexibility required for on‑call and occasional extended shifts depending on case volume

What We’re Looking For

Education

• Associate’s degree in Radiologic Technology or equivalent experience/training

Licensure & Certifications

• ARRT certification
• IEMA license (Illinois Emergency Management Agency)
• AHA CPR (BLS)

Skills & Qualifications

• New RT graduates welcome—training provided for the right candidate
• Strong communication and teamwork abilities
• Ability to thrive in a fast‑paced, procedural environment with cardiac/vascular teams

Perks & Benefits:

• Benefits from Day One (Medical and Dental)
• Competitive Shift Differentials 
• Career Development
• Tuition Reimbursement
• Participation in the Public Service Loan Forgiveness Program
• 403(b) with Employer Match
• On Site Fitness Center (Gottlieb Memorial Hospital & LUMC)
• Referral Rewards
• Perks Program

Pay Range: $30.99 - $50.71 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Position Purpose

The Respiratory Therapist shall be responsible for the administration of respiratory care offered by the Respiratory Care Department

What you will do

• ​Function clinically with a considerable amount of independent judgment regarding the delivery of quality patient care

• Serve as a technical resource person to the physicians and other health care workers, with regard to current practices in respiratory care

• Set up, operate and manage patient care on respiratory related equipment such as mechanical ventilators, NIPPV/CPAP, or High Flow Oxygen devices

• Manage patients on invasive mechanical ventilation modes (AC, PSV, PC, APRV, Bi-level)

Minimum Qualifications

• Graduate of an accredited school of Respiratory Care, minimum of a two-year Associate's Degree

• Current State of CT Respiratory Care Practitioner License

• Registered Respiratory Therapist (RRT) or Certified (CRT) by the National Board of Respiratory Care (NBRC). 

• Thorough knowledge of the procedures and patient care techniques involved in the delivery of respiratory care

Position Highlights and Benefits

• per diem, choose 8hr or 12hr night shifts

• excellent shift and weekend differentials

Pay Range: flat rate base: $38.70 CRT $42.25 RRT plus diffs

Ministry/Facility Information

Mercy Medical Center has established itself as one of the leading providers of health care services in Western Massachusetts. Mercy Medical Center is a 182-bed acute care hospital in Springfield. Other facilities include Mercy's Rehabilitation Hospital, a comprehensive hospital-based rehabilitation center on the campus of Mercy Medical Center and Brightside for Families and Children, an outpatient service offering counseling and family support programs

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

What to expect as a Nursing Supervisor at Saint Mary's Home  

Under the direction of the Director of Nursing Service, the Nursing Supervisor is responsible for the overall coordination and delivery of resident care and clinical supervision of staff on an assigned shift. The Nursing Supervisor is empowered and accountable for taking all reasonable steps to ensure that all staff promote and deliver a level of care that meets or exceeds our residents’ expectation. The Nursing Supervisor will assure that all assigned staff are active participants in the interdisciplinary care team designed to maximize each resident’s potential for independence and autonomy. Functions as the administrative representative designee in the absence of administration in the building. 

REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: 

1. Education - Graduate of an accredited school of nursing. 

2. Current licensure as a Registered Nurse in the State of Connecticut. 

3. Three years in Clinical practice, with one year in long-term care required. 

4. Acute care and supervisory experience preferred. 

5. Excellent communication and assessment skills required. 

6. Working knowledge of OBRA, State and JCAHO regulatory requirements. 

7. Computer literacy strongly preferred. 

8. CPR certification. 

9. Must be able to safely perform the essential job functions with or without reasonable Accommodation. 

What We Offer 

• DailyPay – Access your earnings when you need them 

• Generous PTO for full-time and part-time colleagues 

• Up to $4,000 in annual tuition reimbursement 

• Competitive compensation and shift differentials 

• Employee Assistance Program (EAP) including: 

• Financial wellness: saving, budgeting, and investing guidance 

• Mental health: counseling and stress management tools 

• Work-life support: legal, educational, and lifestyle resources 

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Wichita, KS (Remote)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22

PI28d909dffe6f-38

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Knoxville, TN (Remote)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22

PIc6dba56b523