Jobs in Mukilteo Washington

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Defense Space & Security (BDS) is seeking an Experienced (Level 3) or Senior (Level 4 or Level 5) Systems Engineering Support Analyst to support the BDS Mission Assurance, System Safety and Safety Management Systems (SMS) organizations. This position is open to multiple locations.

Our team is currently hiring for a broad range of experience levels including, Experienced, Lead and Senior .

The selected candidate will be a core member of a fast-paced, productive, and close-knit engineering team. Mission Assurance & System Safety Engineers are integral to the entire product lifecycle to identify, analyze, mitigate and verify the safety hazard risk of our Boeing products. This includes collaboration with all facets of engineering from technology investment, concept development, requirements definition, and design, build, integration, test, and demonstration of products in their fielded environments.

Primary responsibilities:

• Develops, maintains, and communicates strategies, policies, and initiatives to enhance mission assurance, safety, and airworthiness of Boeing products and services.
• Assists to develop, gather and document basic technical data for company products and system-level concepts in the projected operational environments to optimize effectiveness over the program lifecycle.
• Assists with the application of systems engineering processes, methodologies and tools to the design of basic system of systems, systems and new product development.
• Assist with the development of best practices for Mission Assurance and Safety Engineers.
• Coordinate key milestones across BDS programs to ensure the timely execution of mission assurance F/TMARRs and independent reviews.
• Coordinate with Mission Assurance Division leaders to gain readiness status of customer commitments across 35 major BDS programs.
• Researches, analyzes, and compiles basic technical data for company products and system-level concepts in the projected operational environments to optimize effectiveness over the program life-cycle.
• Coordinate with Enterprise stakeholders on Enterprise Safety and Mission Assurance initiatives.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed locations.

Basic Qualifications (Required Skills and Experience):

• Level 3: 5+ years of related work experience or an equivalent combination of education and experience.
• Level 4: 9+ years of related work experience or an equivalent combination of education and experience.
• Level 5: 14+ years of related work experience or an equivalent combination of education and experience.
• Associate’ degree or higher

Preferred Qualifications (Desired Skills and Experience):

• Experience Preparing with and presenting to executives.
• Experience analyzing data and developing metrics to track performance to plan for a business / organization.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range :

• Experienced (Level 3): $92,650 - $143,750
• Senior (Level 4): $113,900 - $177,100
• Senior or Principal (Level 5): $139,400 - $216,200

#CASO

Applications for this position will be accepted until Mar. 24, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Payloads organization within Boeing Commercial Aircraft is seeking Payloads Design Engineers (Associate or Experienced) to join our teams in Everett , WA .

The Payloads Organization is responsible for everything you see when you fly; and much of which you don’t.

The Interiors of the airplane, along with the cargo compartments, exterior markings, associated systems, and cabin safety all make up Payloads. We are how our airline customers fulfill their mission and represent their brand and shape how the public experiences flight.

Our organization is a fast paced, dynamic environment, which pulls from many engineering backgrounds.

The Interiors Responsibility Center (IRC) is a manufacturing facility, and is a fun and exciting place for practical, hands-on engineers who like to see their ideas become reality.

IRC Payloads Design Engineers (DEs) value a hands-on approach to problem-solving. There will be frequent opportunities for collaborating with Operations, building test parts for mockups/validation, and visits to the Airplane Integration Center, Factory and Flight Line.

Job Responsibilities:

• Leads or assist in developing, integrating, and documenting interior payload system requirements to establish the component/system design

• Leads or assists in developing, maintaining, and modifying interior payload system and component designs, using design tools and/or other design methods

• Communicates and collaborates with the value stream which includes multiple engineering organizations, production operations, supply chain, customers, and leadership

• Communications, in-person will frequently be required due to production-facing responsibilities

• Leads or assists performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications

• Supports problem-solving efforts that include multiple disciplines and stakeholders, such as production support (build/installation)

• Reviews engineering for soundness of designs, quality, producibility, etc.

• Documents design/system requirements, design intent, lessons learned, etc. for historical and training purposes

• Works cross functionally with broader team members within an IPT (Integrated Product Team) by making or help making timely sound decisions to carry the projects forward

• Determines and define what is critical and what is not critical for a product and propose creative solutions to stakeholders and approvers

Basic Qualifications (Required Skills/Experience):

• Bachelors of Science (or greater) from an accredited course of study, in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry

• 2+ years of experience in engineering, including design, integration, and/or certification

Preferred Qualifications (Desired Skills/Experience):

• 5+ years of related work experience or an equivalent combination of education and experience

• Master's degree with typically 3 or more years' experience in an engineering classification

• Experience supporting a cross-functional team

• Experience in aerospace interiors, materials and properties, design criteria and release processes

• Demonstrates good problem-solving skills and critical thinking

• Ability to work independently with a high degree of ownership and accountability, and initiative

• Ability to manage a high volume of complex work packages diligently track milestones and ensure process steps are followed to ensure on-time performance

• Be able to understand Interior certification processes and requirements, and how they may impact the engineering, schedule, etc.

• Technical writing skills

• The candidate would ideally have a working knowledge of: ETAC (engineering tracker), ECAS, DCCS (certification trackers), CATIA V5, ENOVIA, IVT, PDM, CMES, MS Office Suite

• Ability to work with regulatory agencies or delegates, suppliers, and customers

Union:

This is a union represented position  

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies .

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. 

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. 

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. 

Summary pay range Associate (Level 2): $96,300 - $117,700

Summary pay range Mid-Level (Level 3): $117,900 - $144,100

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

In partnership with our Director of Engineering, Staff, and Clients, the Building Engineer II will work to meet

the evolving maintenance demands of the Portfolio to ensure a superior level of professionalism regarding

all maintenance requirements, including prompt response to and resolution of client and property

occupant requests or concerns.

KEY RESPONSIBILITIES &DUTIES

• Proactively support the development and successful implementation of the preventative

maintenance program for the portfolio

• Perform scheduled maintenance and repairs in accordance with license(s) held
• Perform scheduled inspections, complete, and submit forms and/or checklists accurately and on

time

• Note items on inspection checklist which require follow up or additional work; communicate

findings with Chief and/or client

• Provide recommendations to Chief Engineer and/or client regarding needed repairs or services
• Act as lead of other Engineers as requested
• Read and understand operations manuals, constructions drawings, diagrams, and work orders

necessary to perform maintenance and other work

• Maintain appearance of property to Facilities Partners and Client’s standards
• Collaborate with other contracted vendors, and ensure quality of work performed by them
• Review, monitor and/or provide scope and specifications for contracted property services
• Partner with Chief and/or client to develop specifications for contracted services
• Respond to and resolve tenant service requests in accordance with license(s) held (e.g., replace

ballasts, repair plumbing, etc.)

• Provide excellent customer service by interacting in a professional and positive manner with

clients, vendors, co-workers, etc.

• Support annual operating and capital budgeting process as requested
• Use a variety of hand and power tools following all safety practices
• Maintain a safe, clean, and organized work environment at all times
• Attend monthly safety trainings and follow all safety procedures
• Report all accidents immediately
• Be aware of and report all potential safety hazards immediately
• Other job duties as requested

WORK ENVIRONMENT

While performing the duties of this job, the employee is frequently exposed to fumes, loud noise,

airborne particles and both hot and cold temperatures.

PHYSICAL REQUIREMENTS

While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items up to 10 pounds and sometimes more than 10 pounds and rarely over 50 pounds. The employee must frequently climb a ladder. Specific vision abilities are required to do this job including close vision, distance vision, peripheral vision, depth vision and the ability to adjust focus. The employee must frequently drive an automobile.

EDUCATION & EXPERIENCE

Education/Certification: High School diploma or equivalent; valid driver’s license, automobile liability insurance and the ability to be covered by our insurer; maintain an O7 card, where applicable

Required Knowledge: Demonstrated working knowledge of typical office building systems (e.g., mechanical, fire and life safety, electrical, HVAC, security systems, plumbing, etc.)

Experience Required: 5-7 years’ experience in commercial building maintenance or related field; 5+ years’ experience operating relevant computer hardware/software (e.g., HVAC, security, MS Office, Work order system, smart phones, etc.)

ADDITIONAL REQUIREMENTS

• Ability to obtain an employee fidelity bond
• Possess excellent communication and organizational skills.
• Able to build relationships with clients, vendors, and internal partners
• Ability to provide excellent customer service and mediate difficult client situations
• Ability to speak, write and understand English
• Professional communication etiquette with good oral and written communication skills
• Demonstrated ability to function as part of a team
• Ability to anticipate problems and solve proactively
• Demonstrated ability to prioritize, multi-task, identify, and utilize resources needed to execute

tasks within a deadline-driven environment

• Demonstrated critical thinking, initiative, and trouble shooting skills
• Demonstrated ability to use relevant technology including email, work order system, and smart

phone

• Willingness and demonstration of professional development and continual learning
• Demonstrated ability to complete tasks thoroughly and on time
• Available to work overtime and be on call as needed
• Professional, clean, and neat appearance
• Ability to provide small hand tools as needed
• Must have dependable vehicle capable of transporting needed tools/equipment (e.g., ladder,

power washer, hand tools, power tools, etc.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement :

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.The 777-8 F Airplane Level Integration Team (ALIT) organization has an exciting opportunity for a Systems Engineering and Integration Manager (Level K) to join our team in Everett, Washington .Position Overview: In this role, you will lead activities critical to the success of the 777-8 F derivative within the 777 X family, such as functional integration, requirements integration, and/or development assurance oversight.

This role will lead teams that own critical program-level deliverables and processes within systems engineering, provide systems engineering expertise and guidance to program Integrated Product Teams (IPTs), and develop artifacts necessary for aircraft certification.

You will have the opportunity to interface with program internal and external organizations such as Engineering Integrated Product Teams, Systems Engineering core, and global partners.The ideal candidate is adaptable, demonstrates curiosity and a learning mindset, has previous experience in Systems Engineering, and has proven ability to lead cross functional teams through complex technical issues.Position Responsibilities: Lead the management and execution of systems engineering activities across the 777-8 F program Lead the development of systems engineering artifacts such as airplane and system-level functional decomposition, functional analysis reports, requirements validation & verification, and program plans and guidance materials Drive accountability for completion of systems engineering activities Integrate amongst program teams to resolve technical risks and issues Manage, develop, and motivate employees Develop and maintain relationships with stakeholders, peers, partners, and team members Develop and execute project and process plans, implement policies and procedures and set operational goals Provide oversight, guidance, and approval of technical approaches, products, and processesWork Authorization:This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at Everett, WA.Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 7+ years of engineering experience in the aerospace or similar industry5+ years of experience leading teams in a formal and/or informal leadership role5+ years in Systems Engineering or Design Engineering (e.g.

Systems, Flight Sciences, Interiors, Propulsion, Safety)Fundamental understanding of systems engineering principles (e.g.

requirements, development assurance, and/or functional integration)Ability to effectively navigate and lead a team through dynamic and ambiguous environmentsPreferred Qualifications (Desired Skills/Experience):1+ years of engineering management experience5+ years of experience leading cross-functional teams to resolve complex technical issuesAbility to communicate complex concepts clearly across different audiences and varying levels of the organizationExperience with leading technical cross functional teams, working across organizational boundaries, and ensuring an inclusive environment

Familiarity with the 777 X family of aircraftConflict of Interest:Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union:This is not a union-represented position.Pay and Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range:$151,000
- 205,000Applications for this position will be accepted until Mar.

30, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.Boeing Commercial Airplanes is seeking an Experienced (Level 3) or Senior (Level 4) Model Based System Engineer to join our Product Security Engineering (PSE) Product Development and Innovation team in Everett, WA or Seattle, WA.

This position will be responsible for ensuring security, safety, and resilience of all digitally connected systems, focused on partnering with BCA and Enterprise Digital Transformation Engineering teams to develop tools and processes, to be used to provide security artifacts for airplane and system development in support of certification.Primary responsibilities:Design, develop, test, and deploy new Digital Engineering features and capabilities for the Boeing Commercial Airplanes Product Security Engineering functionEnsure and maintain the quality of the MBSec Solution Kit (SK) models, processes, and templatesManage PSE Digital Engineering project access control, permissions management, project structure, and to help implement related Access Control PoliciesWork with PSE Enterprise and MBSec Technical Lead, Development Lead, and Scrum-Master to define and execute "releases" of the MBSec SK and other PSE Digital Engineering capabilities per the PSE Digital Engineering technical roadmapWork with the MBSec Development Lead and Scrum-Master to define new features to add and align within the PSE Digital Engineering technical roadmapWork with the PSE Engineering Integration Lead to align MBSec SK, and other PSE Digital Engineering tools, with defined enterprise and BCA PSE Engineering Capabilities and engineering activitiesParticipate in peer reviews and technical reviews related to PSE Digital Engineering features and capabilitiesManage the deployment and implementation of MBSec across multiple BCA programs for Product Security EngineeringDevelop and define training materials, courses, and pathways for PSE Digital Engineering tools and capabilities.Train and teach PSEs from across the enterprise in the use of PSE Digital Engineering tools and capabilitiesParticipate as a contributor to the Enterprise PSE community for Model Based Solution Kits and Design PracticesWork in and utilize agile methodologies for planning and execution of tasks across the teamDefine and craft the technical capabilities roadmap for PSE Digital EngineeringBasic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Level 3: 5+ years of related work experience or an equivalent combination of education and experience Level 4: 9+ years of related work experience or an equivalent combination of education and experience Experience with Model Based Engineering tools and languages such as Enterprise Architecture, Cameo, Magic Draw, UML/Sys ML, 3 DX, CATIA Experience with system security engineering or systems engineering Experience with analysis of requirements, architecture, design, and product designPreferred Qualifications (Desired Skills and Experience): Accredited degree or certificate in Systems Engineering with a focus or emphasis on Model Based Systems Engineering (MBSE) Experience in Airplane System Development, Product Security, Cybersecurity, or Systems Security Engineering Demonstrated history of performance in systems, systems security, or software engineering throughout the course of engineering or operations lifecycle Highly motivated and exhibit strong written and verbal communication, inter-personal, and problem-solving skills Experience with Model Based Engineering languages and frameworks such as UAF, Do DAF, MODAF, AADL, UPDM etc Experience with formalized semantics and semantic modeling languages and frameworks such as RDF, OWL, SPARQL, and TTL Understanding and working knowledge of various standards, including: DFARS Clause 252.204-7012, CNSSI 1253, DOD 8570, NIST 800-160, NIST 800-53 (and 53 A), NIST 800-30, NIST 800-171, NIST 800-55, NIST 800-137, NIST 800-39 etcDrug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range :Experienced (Level 3): $137,700
- $186,300Senior (Level 4): $173,400
- $234,600 Applications for this position will be accepted until Mar.

28, 2026Export Control Requirements:This position must meet U.

S.

export control compliance requirements.

To meet U.

S.

export control compliance requirements, a "U.

S.

Person" as defined by 22 C.

F.

R.

§120.62 is required.

"U.

S.

Person" includes U.

S.

Citizen, U.

S.

National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredEducationBachelor's Degree or Equivalent RequiredRelocationThis position offers relocation based on candidate eligibility.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.The Boeing Commercial Airplane (BCA) Engineering Data Analytics Tool Team (BEDAT) is looking for a Engineering Analytics Analyst to assist in transforming the BCA Engineering Digital footprint in Everett, WA .Primary Responsibilities: Collect, analyze and implement technical requirements for key performance indicators and metrics in a Cognos based dashboard serving community of 1500 users Design and support backend data source using MS SQL Server/Cognos, by extracting and staging data from 40 upstream databases, creating a single source authority for all BCA engineering related metrics and analytics Develop ad-hoc queries, reports and analytical analysis through SQL, R and Tableau in collaboration with business partners to analyze emerging opportunities Work closely with all levels of BCA Engineering leadership to understand the business and technical requirements Google Cloud Platform familiarization Leads cross-functional teams across multiple business processes Ensures accurate deliverables and maintains results, and communicates to all participants Collects, analyzes, documents, and integrates requirements from multiple process owners Applies and makes recommendations for the process, data, and applications/systems architecture May benchmark, or assist in benchmarking, best practices and industry standards; presents best practices at internal events Learns to balance competing strategic initiatives Conducts business requirements review, coordinates testing schedules, and assists in the preparation of test scripts Communicates with information technology organizations to represent customers and functional users on project requirements, activities, and status Serves as liaison to resolve business requirement issues between customer and information technology representatives Demonstrates basic knowledge and use of Project Management and/or Program Management Best Practices tools necessary to assist clients working through the life cycle of an improvement project, Includes facilitating plan development Seeks opportunities for company-wide synergy with practitioners of methods and tools from other skills or organizations Assists with integration of remaining aspects of enterprise architecture (e.g.

information, data, and applications architecture) Ensures solution has architectural compliance and strategic alignment with business objectives Leads, participates, or works together to reach agreement on the development of business architecture design, phased implementation, and useBasic Qualifications (Required Skills/ Experience): 1 or more years' experience with collecting, organizing, synthesizing, and analyzing data from multiple sources, summarizes findings; develops conclusions and recommendations from appropriate data sources.

1 or more years' of experience utilizing and developing Analytical tools & code.

ie.

SQL, tableau, Cognos, teradata, cloud platforms etc.

Bachelors' degree OR equivalent experience.Preferred Qualifications (Desired Skills/Experience): 1 more years' experience with supporting multiple managers / leaders with developing strategic monthly, quarterly and yearly strategic plans.

1 or more years' experience working directly with executives or senior leadersDrug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range:Level 3
- $93,090
- $105,280

Applications for this position will be accepted until Mar.

23, 2026Export Control Requirements:This is not an Export Control position.EducationBachelor's Degree or Equivalent RequiredRelocationRelocation assistance is not a negotiable benefit for this position.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

As a Home Health Registered Nurse, you will:

• Provide skilled nursing care to patients, working onsite in their homes, including administering medications, performing wound care, and conducting patient assessments.
• Develop and implement individualized care plans in collaboration with physicians and other healthcare professionals.
• Monitor patients' conditions and report changes.
• Educate patients and their families on disease management, medication, and treatment options.
• Maintain accurate records of patient care and coordinate with other healthcare professionals.
• Report patient care and condition progress to patient's physician and Clinical Manager.
• Oversee the work of Home Health Aides and monitor their appropriate completion of documentation.

Required Qualifications:

• Diploma, Associate or Bachelor's Degree in Nursing

• Med surg, ICU, ER, or acute experience

• Current and unrestricted Registered Nurse licensure

• Current CPR certification

• Experience collaborating with a team of healthcare professionals

• Valid driver's license, auto insurance and reliable transportation

Preferred Qualifications:

• One year nursing experience

• Home Health experience

Pay Range
•    $63.00 - $88.00 pay per visit/unit
•    $92,600 - $127,400 per year base pay
 

Additional Information

TB Statement:

This role is considered patient facing and is part of Humana's Tuberculosis (TB) screening program. If selected for this role, you will be required to be screened for TB.

Driving Statement:

This role is part of Humana's driver safety program and therefore requires an individual to have a valid state driver's license and are expected to maintain personal vehicle liability insurance. Individual must carry vehicle insurance in accordance with their residing state minimum required limits, or $25,000 bodily injury per person/$25,000 bodily injury per event /$10,000 for property damage or whichever is higher.

Scheduled Weekly Hours

Pay Range

Description of Benefits

​
Equal Opportunity Employer

It is the policy of Humana not to discriminate against any employee or applicant for employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or protected veteran status. It is also the policy of Humana to take affirmative action, in compliance with Section 503 of the Rehabilitation Act and VEVRAA, to employ and to advance in employment individuals with disability or protected veteran status, and to base all employment decisions only on valid job requirements. This policy shall apply to all employment actions, including but not limited to recruitment, hiring, upgrading, promotion, transfer, demotion, layoff, recall, termination, rates of pay or other forms of compensation and selection for training, including apprenticeship, at all levels of employment.