Jobs in Maple Valley, WA
158 positions found
NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.
Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.
If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .
AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.
DON'T FORGET TO CHECK OUT THE INCENTIVES β SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939β$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.
Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.
Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).
GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.
You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.
Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.
Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.
The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.
Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.
Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of β 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.
Locations are offered based on the current needs of the service at that time.
Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.
Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.
Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.
Collecting, refining, and analyzing strategic and tactical intelligence.
Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.
See the U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.
You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.
Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.
Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.
Highly skilled in writing comprehensive arrest, criminal and incident reports.
Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.
Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.
OR GS-11 Education Substitution for experience: A Ph.D.
or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.
OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.
This will be calculated using your resume and unofficial transcripts submitted with your application.
AND U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.
Your copies must include the expiration and capacity pages of your MMC.
Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.
It cannot be pending additional information for MMLD application process.
You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.
NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.
Please see the "Required Documents" section below for additional resume requirements.
Other Requirements Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d), or creditable service covered by Title 5 U.S.C.
8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.
This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.
Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.
3312.
You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.
Training : This position has a training requirement.
You may be required to successfully complete the training requirement as a condition of employment.
Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.
Travel Required: You may be expected to travel for this position based on operational needs.
How to Apply Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.
You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.
Doctor of Medicine | Cardiology - General/Other
Location: Issaquah, WA
Employer: Adelphi Locums
Pay: Competitive weekly pay (inquire for details)
Start Date: ASAP
About the Position
LocumJobsOnline is working with Adelphi Locums to find a qualified Cardiology MD in Issaquah, Washington, 98027!
Job Quick Facts:
- Specialty: Interventional Cardiology
- Job Type: Locum Tenens
- Facility Location: Washington - Seattle, Issaquah
- Service Setting: Inpatient
- Reason For Coverage: Locum Tenens
- Coverage Period: ASAP - ongoing
- Coverage Type: Clinical + Call
- Shift Coverage: STEMI, Cath Lab
- Shift Schedule: 5 weeknights and 1 Weekend/month - Seattle: 7p-7a - Issequah: 7a-7p
- Call Schedule: - Issequah: Nights; 7p-7a
- Call Type: Beeper
- Call Response Time: 20 mins
- Phone Consults: 1-2
- Patient Volume: 5-7; 1-2 (ICU)
- Procedures per day: 3-4
- Rounding Patients: Yes
- Cardiologist in Group: 38
- Support Staff: 37 APPs
- Procedures/Duties: - PA Catheter Placement - IABP, Cardiac Cath - Angioplasty, Atherectomy - Intracoronary Stent Placement
- No of Beds: 175; 18 (ICU)
- Trauma Level: I
- Lab, Treadmill, Echo, EKG on-site
- EMR: Epic
- Hospital Privileges required: Yes
- Temporary Privileges available: Yes
- Travel, lodging, and malpractice insurance covered
Requirements:
- Active WA License or IMLC
- BC
- ACLS, BLS
About Adelphi Locums
Adelphi Locums, a brand of Adelphi Staffing, provides locum tenens staffing solutions for healthcare facilities across the U.S., connecting them with qualified physicians, advanced practitioners, and other medical professionals for temporary coverage needs.
1709761EXPPLAT
Doctor of Medicine | Family Practice
Location: Kent, WA
Employer: CompHealth
Pay: Competitive weekly pay (inquire for details)
Start Date: ASAP
About the Position
LocumJobsOnline is working with CompHealth to find a qualified Family Practice MD in Kent, Washington, 98030!
CompHealth exists to make the locums process easier. Not only will we search for jobs that fit your interests, we'll be here to handle all the details like credentialing, housing, travel arrangements, and so much more. So, relax and get back to helping patients, and let us do the heavy lifting.
- 4 days per week Monday-Friday plus one late night shift weekly
- 21-24 patients per day
- Community health clinic
- Must be comfortable prescribing birth control
- Must be comfortable with pregnancy options counseling
- All ages patient population
- Hospital privileges required
- Experience preferred but will accept new graduates
- We negotiate better pay and deposit it weekly
- We arrange complimentary housing and travel and comprehensive malpractice coverage
- We simplify the credentialing and privileging process
- Access to online portal for assignment details and time entry
- Your specialized recruiter takes care of every detail
About CompHealth
CompHealth is one of the largest healthcare staffing companies in the United States offering permanent, locum tenens, travel and other placements for healthcare providers. Our company dates back to 1979, when two physicians created the locum tenens industry as a way to meet the needs of rural hospitals in desperate need of healthcare professionals. In the years since, weβve placed providers in hundreds of specialties in temporary and permanent jobs in both rural and urban settings all over the country, serving millions of patients.Β
Though every temporary or permanent position is different, our goal is always the same: To match the right job with the right provider. We do that by getting to know you and whatβs most important to you. And with more than 1,000 specialized recruiters and in-house licensing, credentialing, travel, and legal teams, we can take care of all the details, whatever the position.
Getting to know you ties back to our belief in putting people first. This includes our healthcare providers, our clients, and our employees. This people-centric culture has been recognized by various award programs, including Staffing Industry Analyst's "Best Staffing Firms to Work For", Modern Healthcare's "Best Places to Work", and Inavero's "Best of Staffing".
To learn more, visit
1711507EXPPLAT
This Dedicated Fleet Offers:
- Home Weekly - 34-hour reset
- Drivers average $64,000 annually - Top 10% earn up to $76,000 per year
- No-touch refrigerated freight
- Top-of-the-line automatic transmission trucks
- Drivers will deliver to Seattle, WA / Tukwila, WA / Portland, OR / Boise, ID
Route Details:
Hiring Dedicated Regional Drivers. We are seeking qualified drivers for a new dedicated fleet. Drivers on this fleet deliver no-touch refrigerated freight, including dairy products such as milk, cheese, and butter. Routes begin in Burley, Idaho with delivery destinations in Seattle, WA; Tukwila, WA; Portland, OR; and Boise, ID. This account operates seven days a week with a weekly 34-hour home time reset. If you are looking for new driving opportunity with a great home time, we encourage you to apply. Drivers will need to par equipment at a truck stop.
With our freight being no-touch, you can focus on what you do best: driving. Plus, with our top-of-the-line equipment, you'll have everything you need to hit the road in style and safety.
If you have what it takes to service our customers with the highest degree of customer service and integrity, we want to speak with you.
Apply now and join our team of skilled drivers on the open road. We can't wait to welcome you to the family!
Requirements:
- Valid CDL-A and 3+ months of current experience are required
- This lane is not suitable for students, recent grads, or trainees
- Must be 21 years or older
- Must be able to pass a DOT drug screen
Your Journey to Success Starts Here - Apply Today!
Benefits Include:
- Full benefits package for you and your family
- 401(k) participation
- Paid time off & bonus incentives
- Unlimited cash referral program
Better Pay, Home Time, and Miles - Apply Now!
Pay Disclaimer:* The job information and data provided here are for informational purposes only, are based in whole or in part on estimates, and do not represent any type of promise or prediction of future performance or employment. PAST PERFORMANCE AND THE INFORMATION CONTAINED HERE ARE NO GUARANTEE OF FUTURE PAY RESULTS, REVENUE, MILES, OR HOME TIME. NO RIGHT TO EMPLOYMENT, CONTINUED EMPLOYMENT, SPECIFIC EMPLOYMENT, OR A MINIMUM AMOUNT OF MILES OR HOME TIME, OR SPECIFIC PAY AMOUNT IS GUARANTEED OR CREATED BY THIS DATA OR THE USE OF THIS SITE. ANY AMOUNTS IN ANY CATEGORIES ON THIS SITE WILL NOT REFLECT ACTUAL FUTURE RESULTS. Your actual pay, mileage, and home time will vary from these numbers depending on many factors, which may include tenure-based pay rates, your fleet, how hard you work, company performance, and how much you drive, among other factors. Because precise rate of pay can be difficult to guarantee in various pay structures common in the transportation industry, you are only guaranteed applicable minimum wage for hours worked in a given pay period. Click here for additional disclaimer information and additional detail about how this data is generated.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. Weβre committed to fostering an environment for every teammate thatβs welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Skin & Spar Surface Finish Technician to join our Fabrication team in Auburn, Algona and Puyallup, Washington.
Join our dynamic team as a Skin & Spar Surface Finish Tech, where precision meets innovation in the aerospace industry. In this pivotal role, you will leverage your expertise in interpreting blueprints and engineering specifications to execute meticulous surface finishing and conditioning on critical components such as milled skins and spars. Utilizing advanced templates and jigs, you will ensure optimal positioning for finishing operations, while employing a variety of hand and power tools to achieve exceptional quality standards. Your keen eye for detail will be essential as you diagnose discrepancies, perform thorough inspections, and conduct necessary rework to meet stringent gauge tolerances. Collaborating closely with supervisors and engineering teams, you will navigate complex work orders and utilize online systems to prioritize tasks effectively. Your commitment to safety and compliance will shine through as you handle hazardous materials responsibly and maintain certifications. If you are passionate about delivering excellence in aerospace manufacturing, we invite you to be a part of our mission to shape the future of flight.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Work from blueprints, templates, detail drawings, and verbal instructions to perform surface finish/conditioning on coordination holes in milled skins and spars.
Use templates and jigs to properly position parts for subsequent finishing operations, including reaming, countersinking, and cold work.
Scribe tooling locations and reference lines as specified in engineering drawings and specifications.
Diagnose and correct any detected discrepancies in parts and processes.
Check finished parts to ensure they meet quality requirements and specifications using precision measuring instruments (e.g., micrometers, trammels, probes).
Use hand and power tools, including air motors, reamers, and cold-work guns, to perform finishing duties on machined parts.
Operate ground-controlled handling equipment to load, unload, and move parts within the shop.
Perform rework as required, including filing, scraping, sanding, grinding, and hand finishing to meet gauge tolerances.
Locate points and holes from established reference lines or index points using prints, templates, and work orders.
Perform visual and functional checks on tools and accessories, making necessary adjustments and ensuring they are in good condition.
Access workload using online computer systems and assign work based on priority or Team Leader direction.
Review Work Order (W/O) to determine work requirements and ensure prior operations are complete.
Consult with supervisor/team lead and other sources (e.g., engineering, planning, inspection) to resolve problems.
Call for inspection or use SI&A as required throughout the process, including checking hole sizes and inspecting countersinks.
Handle and dispose of hazardous materials in an approved manner while maintaining personal and tool certifications, ensuring compliance with safety standards.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a βUS Personβ as defined by 22 C.F.R. Β§ 120.15 is required. βUS Personβ includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
Basic computer experience and competency.
Experience using basic math (e.g. addition, subtraction, multiplication and division).
1+ years of experience or training in reading and interpreting drawings or blueprints.
2+ years of experience using hand tools and/or hand-held power tool
Able to close tolerance drill within .003 and able to precision measure between .003.
Able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.
Preferred Qualifications:
2+ years of experience providing close tolerance measurements and cuts on close tolerance holes.
Ability to close tolerance.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
This position is for a variety of shifts.
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar. 23, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Charge RN - NICU Pediatrics Transport @ Swedish First Hill
Full time 0.9 FTE
Night Shift
Providence nurses are not simply valued β theyβre invaluable. You will thrive in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best nurses, we must empower them. Learn why nurses choose to work at Providence by visiting our Nursing Institute page.
Join our team at Swedish First Hill. As a Providence caregiver, youβll apply your specialized training to deliver world-class health with human connection and make a difference every day through your extraordinary care.
This position supports the ground transport of our premature neonates up to 18-year-olds. As a member of our fast-paced, small team, you will build amazing relationships with our team of MDs, ARNPs, and RTs.
Key Responsibilities:
- Provide critical care during ground transport for neonatal and pediatric patients.
- Collaborate closely with MDs, ARNPs, and RTs to ensure the highest level of care.
- Maintain flexibility, independence, and initiative in a dynamic environment.
- Demonstrate strong clinical judgment and problem-solving skills.
Required Qualifications:
- Graduation from an accredited nursing program.
- Upon hire: National Provider BLS - American Heart Association
- Upon hire: Washington Registered Nurse License
- 1 year critical care in a PICU or level 4 NICU Nursing experience.
Why Join Providence?
Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally and achieving financial security. We take care of you, so you can focus on delivering our mission of improving the health and wellbeing of each patient we serve.
About Providence
At Providence, our strength lies in Our Promise of βKnow me, care for me, ease my way.β Working at our family of organizations means that regardless of your role, weβll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable.
Posted are the minimum and the maximum wage rates on the wage range for this position. The successful candidate's placement on the wage range for this position will be determined based upon relevant job experience and other applicable factors. These amounts are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.
Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits.
Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.
About the Team
Providence Swedish is the largest not-for-profit health care system in the greater Puget Sound area. It is comprised of eight hospital campuses (Ballard, Edmonds, Everett, Centralia, Cherry Hill (Seattle), First Hill (Seattle), Issaquah and Olympia); emergency rooms and specialty centers in Redmond (East King County) and the Mill Creek area in Everett; and Providence Swedish Medical Group, a network of 190+ primary care and specialty care locations throughout the Puget Sound. Whether through physician clinics, education, research and innovation or other outreach, weβre dedicated to improving the wellbeing of rural and urban communities by expanding access to quality health care for all.
Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement.
For any concerns with this posting relating to the posting requirements in RCW 49.58.110(1), please click here where you can access an email link to submit your concern.
Requsition ID: 407119
Company: Swedish Jobs
Job Category: Nursing-Patient Facing
Job Function: Nursing
Job Schedule: Full time
Job Shift: Night
Career Track: Nursing
Department: 3901 SFHC NICU PEDS TRANSPORT
Address: WA Seattle 747 Broadway
Work Location: Swedish First Hill 747 Broadway-Seattle
Workplace Type: On-site
Pay Range: $48.85 - $89.91
The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.
PandoLogic. Category:Healthcare, Keywords:Pediatric Nurse, Location:Renton, WA-98055
Providence is calling for Registered Nurses (RNs) to Providence Mount St. Vincent in Seattle, Washington.
We are looking for Full time and Part time for all shifts (Day, Evening, Variable)
Job Description:
The RN Primary Nurse has overall responsibility for the care of residents and patients
- in her/his neighborhood. S/he works in partnership with residents, family members, and care team to plan and implement care. Responsibility for resident care is delegated to associate nurses and other care team members when not on duty. In all other ways, fulfills the job summary of the Registered Nurse in skilled nursing.
Providenceβs Post-Acute Care facilities offer a sense of community and home to all our resident patients. Join our team to become a part of fostering a special environment that supports the happier, healthier lives of elders in your community.
Benefits and perks:
- Competitive pay (including holiday pay & shift pay differentials)
- Best-in-class benefits β full medical, dental and vision coverage from your first day
- 401(k) plan with employer matching & complementary retirement planner
- Generous paid time off for vacation, sick days and holidays
- Tuition reimbursement & student loan forgiveness programs
- Wellness & mental health assistance programs
- Back-up child & elder care to help with care disruptions for your family
- Voluntary benefits, like pet, auto and home insurance, and more!
Highlights of working at Providence Mount St. Vincent:
- Easy commute β weβre across the street from a major bus line & 5 minute from the freeway
- Down-to-earth leadership with high engagement and an open door
- Onsite childcare (baby through preschool) at a 20% discount
- Work with a diverse, multigenerational group of caregivers
- Spend your workdays in a beautiful facility with a gorgeous view
Required Qualifications:
- Nursing Degree
- Washington Registered Nurse License upon hire
- National Provider BLS - American Heart Association within 30 days of hire
- 1 year of Nursing experience in a like population
Preferred Qualifications:
- Bachelor's Degree in Nursing
- National Certification in area of specialty upon hire
- 1 year of previous charge nurse or primary nurse experience, including leading teams.
- 1 year of Nursing experience in an environment that provides person-directed care.
Why Join Providence?
Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally, and achieving financial security. We take care of you, so you can focus on delivering our Mission of caring for everyone, especially the most vulnerable in our communities.
About Providence
At Providence, our strength lies in Our Promise of βKnow me, care for me, ease my way.β Working at our family of organizations means that regardless of your role, weβll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable.
Posted are the minimum and the maximum wage rates on the wage range for this position. The successful candidate's placement on the wage range for this position will be determined based upon relevant job experience and other applicable factors. These amounts are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.
Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits.
Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.
About the Team
Providence Home and Community Care (HCC) is a service line within Providence with over 8,000 caregivers and 2,000 volunteers serving nearly 200,000 people a year, in their homes, in clinics and in a variety of congregate living ministries across our seven-state footprint.
HCC provides a full range of services and support for people of all ages, especially those facing chronic or life-limiting illnesses. Our core competencies include restorative care, longitudinal care and care through the end of life. Our service lines include assisted living/skilled nursing/rehabilitation, home health, home infusion/pharmacy services, home medical equipment, hospice and palliative care, Program of All-Inclusive Care for the Elderly (PACE), personal home services/private duty care and supportive housing.
Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement.
Requsition ID: 411339
Company: Providence Jobs
Job Category: Patient Care (Non-Acute)
Job Function: Clinical Care
Job Schedule: Full time
Job Shift: Multiple shifts available
Career Track: Nursing
Department: 3302 SKILLED NSG CARE PMSV FL 3
Address: WA Seattle 4831 35th Ave SW
Work Location: Mount St Vincent-Seattle
Workplace Type: On-site
Pay Range: $43.12 - $66.95
The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.
PandoLogic. Category:Healthcare, Keywords:Long Term Care Nurse, Location:Kent, WA-98089
$5,000 Hiring Bonus for eligible external candidates who meet all conditions for payment - this is in addition to the fantastic benefits and compensation package offered by Providence that begin on your first day of employment. Join us, and find out how many ways we offer you the chance to focus on what really matters - our patients.
Providence nurses are not simply valued β theyβre invaluable. You will thrive in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best nurses, we must empower them. Learn why nurses choose to work at Providence by visiting our Nursing Institute page.
Join our team at Swedish First Hill. As a Providence caregiver, youβll apply your specialized training to deliver world-class health with human connection and make a difference every day through your extraordinary care.
Required qualifications:
- Graduation from an accredited nursing program.
- Washington Registered Nurse License upon hire.
- National Provider BLS - American Heart Association upon hire.
- National Provider NRP - American Academy of Pediatrics upon hire.
- 1 year OB Nursing experience
Preferred qualifications:
- Upon hire: National Certification in area of specialty
Why Join Providence?
Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally and achieving financial security. We take care of you, so you can focus on delivering our mission of improving the health and wellbeing of each patient we serve.
About Providence
At Providence, our strength lies in Our Promise of βKnow me, care for me, ease my way.β Working at our family of organizations means that regardless of your role, weβll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable.
Posted are the minimum and the maximum wage rates on the wage range for this position. The successful candidate's placement on the wage range for this position will be determined based upon relevant job experience and other applicable factors. These amounts are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.
Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits.
Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.
About the Team
Providence Swedish is the largest not-for-profit health care system in the greater Puget Sound area. It is comprised of eight hospital campuses (Ballard, Edmonds, Everett, Centralia, Cherry Hill (Seattle), First Hill (Seattle), Issaquah and Olympia); emergency rooms and specialty centers in Redmond (East King County) and the Mill Creek area in Everett; and Providence Swedish Medical Group, a network of 190+ primary care and specialty care locations throughout the Puget Sound. Whether through physician clinics, education, research and innovation or other outreach, weβre dedicated to improving the wellbeing of rural and urban communities by expanding access to quality health care for all.
Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement.
For any concerns with this posting relating to the posting requirements in RCW 49.58.110(1), please click here where you can access an email link to submit your concern.
Requsition ID: 416973
Company: Swedish Jobs
Job Category: Nursing-Patient Facing
Job Function: Nursing
Job Schedule: Full time
Job Shift: Multiple shifts available
Career Track: Nursing
Department: 3901 SFH OB FLOAT POOL
Address: WA Seattle 747 Broadway
Work Location: Swedish First Hill 747 Broadway-Seattle
Workplace Type: On-site
Pay Range: $48.85 - $89.91
The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.
PandoLogic. Category:Healthcare, Keywords:OB-GYN Nurse, Location:Kent, WA-98089
Ready to change your life β and someone else's?
At Joy of Life, every day you make a real difference.
Join a team where compassion meets opportunity and earn up to $100K while doing what truly matters.
Be the reason someone holds their child for the first time. Be the hero in someone's story β and your own.
Apply now. Your journey starts here.
Ready to change your life β and someone else's?
At Joy of Life, every day you make a real difference.
Join a team where compassion meets opportunity and earn up to $100K while doing what truly matters.
Be the reason someone holds their child for the first time. Be the hero in someone's story β and your own.
Apply now. Your journey starts here.
Customs and Border Protection Officer (CBPO) NEW RECRUITMENT INCENTIVES! U.S.
Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.
You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation.
If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move.
DON'T FORGET TO CHECK OUT THE INCENTIVES β SEE SALARY SECTION BELOW As a Customs and Border Protection Officer (CBPO) , you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.
Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include: Enforcing customs, immigration, and agriculture laws and regulations.
Facilitating the flow of legitimate trade and travel.
Conducting inspections of individuals and conveyances.
Determining the admissibility of individuals for entry into the United States; and Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband.
Duty Locations β Incentives available for some locations You will be asked to provide your preference for one of the following mission-critical locations: Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando FL; Honolulu, HI; Chicago, IL; Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout River, and Buffalo NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo, Presidio, Progreso and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT; Blaine, Oroville, and Sumas, WA.
The preference locations listed above are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States.
Locations offered are based on operational and mission requirements and critical agency hiring needs for entry-level CBPOs as determined by the CBP Office of Field Operations (OFO).
Salary β and Duty Location Recruitment Incentives β and Benefits Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the following locations: Arizona: Douglas, Lukeville, Nogales, San Luis California: Calexico Hawaii: Honolulu Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro Michigan: Detroit, Port Huron, Sault Sainte Marie Minnesota: Grand Portage, International Falls Montana: Raymond, Sweetgrass New York: Alexandria Bay, Champlain, Massena, Trout River North Dakota: Dunseith, Portal Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford Washington: Blaine, Oroville Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a four-year service contract, in the following locations: California: Otay Mesa, San Francisco, San Ysidro, Tecate Florida: Key West North Dakota: Pembina Annual Base Salary for newly appointed CBPOs varies as follows: GS-9 $61,111
- $124,443 per year Locality pay varies by duty location.
Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary.
Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity.
This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12.
You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level.
Promotions are at the discretion of the agency.
Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Qualifications: You qualify for the GS-9 grade level in one of the following ways: experience, education, or a combination of both.
Experience: A minimum of one (1) year of specialized experience equivalent to at least the next lower grade level that includes: Detaining suspected violators of federal, state, or local laws and/or arresting violators using the proper law enforcement methods.
Enforcing the laws and regulations relating to importing, exporting, and/or international shipping to and from the United States.
Utilizing intelligence techniques and behavior analysis to identify potential threats and perform risk assessments for violations of laws and threats to national security.
Conducting interviews in a law enforcement capacity for the purposes of gaining information from suspected violators of laws to determine the appropriate course of action.
The above experience will be applied in connection with the following: Ability to make rapid, accurate judgments and decisions with respect to the application of the regulations, instructions, and procedures for importing and exporting merchandise to and from the United States; or enforcement and administration of laws relating to the right of persons to enter, reside in or depart from the United States, Guam, Puerto Rico, and the U.S.
Virgin Islands.
Education Substitution: A master's (or higher) degree, or two or more years of progressively higher-level graduate education leading to such a degree, or an LL.B.
or J.D.
from an accredited college or university; OR Combination of Experience and Education: A combination of specialized experience AND successfully completed graduate-level education.
This will be calculated using your resume and official or unofficial transcripts submitted with your application.
Other Requirements: Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years.
Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA).
The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training : You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port.
You will then attend a 101-day training program β CBP Field Operations Academy β conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA.
This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc.
Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port.
Successful completion of the Academy is required for this position .
How to Apply: Click the Apply button on this site.
You will be linked to the CBP Talent Network page.
For Position of Interest , select Customs and Border Protection Officer.
You'll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application.
Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit.
You will be evaluated based on your resume, supporting documents, and the CBPO Entrance Exam.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with OFO and CBP.
Do you want to become a surrogate? We are now offering a sign on bonus to all qualified and matched surrogates that sign contracts. The first step is to fill out our surrogate application. A fertility specialist will contact you to continue the process. For intended parents interested in surrogacy to start or grow their families please contact us today. The surrogacy process is complex, but we will be with you every step of the way. Call today to get started.
Women who may have the ability to produce eggs but are unable to use their uterus or do not have a uterus, may consider a surrogate. A donated egg may also be used with the surrogate in the event a woman cannot produce her own eggs or her uterus is not intact or insufficient to carry a pregnancy. In either case, the husband's sperm, if viable, may be used.
Using an egg donor unrelated to the surrogate carrier eliminates any biological tie. The egg of the surrogate is never used as part of the assisted reproduction process, so that a surrogate is never in the position of delivering her own biological child.
The basic requirements of a woman to serve as a surrogate are:
- Emotionally stable
- Responsible
- In good physical health
- Non-smoker
- Has had at least one successful pregnancy
- Is capable of carrying a child to full term
A woman is not required to fall within a particular age range to serve as a surrogate, but most intended parents prefer a surrogate under the age of 40. For more information on surrogacy please see the documents on the left side of this page.
In Texas, there is a judicial process for validating the Gestational Contract (the contract between the intended parents and the surrogate). Included within the various requirements for having a Gestational Contract validated by a Texas court is that the intended parents must be married and the surrogate must have previously carried a child to term. Additionally, there are residency requirements that apply to either the surrogate or the intended parents, but not both.
Compensation for a surrogate services generally starts in the range of $35,000 - $40,000, for base compensation with over all fees up to 70k, in many cases. The amount of compensation is dependent upon a variety of factors, including, but not limited to, whether the surrogate carries twins, what procedures a surrogate is required to undergo and whether the delivery is vaginally or by cesarean section.
Customs and Border Protection Officer (CBPO) NEW RECRUITMENT INCENTIVES! U.S.
Customs and Border Protection (CBP) offers those interested in a career in law enforcement an exceptional opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.
You will be part of the Department of Homeland Security workforce, protecting American interests and securing our nation.
If you are looking for a rewarding career with great pay, benefits, and job stability, now is the time to make your move.
DON'T FORGET TO CHECK OUT THE INCENTIVES β SEE SALARY SECTION BELOW As a Customs and Border Protection Officer (CBPO) , you will be part of our 60,000 workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity.
Being a CBPO makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.
Typical assignments include: Enforcing customs, immigration, and agriculture laws and regulations.
Facilitating the flow of legitimate trade and travel.
Conducting inspections of individuals and conveyances.
Determining the admissibility of individuals for entry into the United States.
Preventing the illegal entry of individuals and prohibited goods and the smuggling of illegal drugs and other contraband.
Duty Locations β Incentives available for some locations You will be asked to provide your preference for one of the following mission-critical locations: Anchorage, AK; Douglas, Lukeville, Nogales and San Luis, AZ; Calexico, Otay Mesa, San Francisco, San Ysidro, and Tecate, CA; Washington, D.C.; Key West, Miami, and Orlando FL; Honolulu, HI; Chicago, IL; Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, and Vanceboro, ME; Detroit, Port Huron, and Sault Ste Marie, MI; Grand Portage and International Falls, MN; Raymond, Roosville, Sweetgrass, and Wild Horse, MT; Columbus and Santa Teresa, NM; Alexandria Bay, Champlain, Massena, Trout River, and Buffalo NY; Dunseith, Pembina, and Portal, ND; Brownsville, Dallas, Del Rio, El Paso, Hidalgo, Laredo, Presidio, Progreso and Houston, TX; Beecher Falls, Derby Line, Highgate Springs, Norton, and Richford, VT; Blaine, Oroville, and Sumas, WA.
The preference locations listed above are expected to have vacancies available in the future, however, if the duty locations do not have vacancies at the time of your final offer, you may be offered a duty location in another geographic location within the United States.
Locations offered are based on operational and mission requirements and critical agency hiring needs for entry-level CBPOs as determined by the CBP Office of Field Operations (OFO).
Salary β and Duty Location Recruitment Incentives β and Benefits Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a three-year service contract, in the following locations: Arizona: Douglas, Lukeville, Nogales, San Luis California: Calexico Hawaii: Honolulu Maine: Calais, Eastport, Houlton, Jackman, Madawaska, Van Buren, Vanceboro Michigan: Detroit, Port Huron, Sault Sainte Marie Minnesota: Grand Portage, International Falls Montana: Raymond, Sweetgrass New York: Alexandria Bay, Champlain, Massena, Trout River North Dakota: Dunseith, Portal Vermont: Beecher Falls, Derby Line, Highgate Springs, Norton, Richford Washington: Blaine, Oroville Recruitment Incentive Newly appointed Customs and Border Protection Officers (as defined in 5 CFR 575.102 ) will be offered up to a $15,000 incentive per year, for a four-year service contract, in the following locations: California: Otay Mesa, San Francisco, San Ysidro, Tecate Florida: Key West North Dakota: Pembina Annual Base Salary for newly appointed CBPOs varies as follows: GS-5 and GS-7 $40,332
- $109,952 per year Locality pay varies by duty location.
Note: A fully trained CBPO is eligible for up to $45,000 in overtime pay in addition to the starting salary.
Grade level eligibility and salaries vary depending upon background, including experience and education, and duty location of the opportunity.
This is a career ladder position with a grade level progression of GS-5, GS-7, GS-9, GS-11, and GS-12.
You will be eligible for a promotion to the next higher grade level (without re-applying) once you successfully complete 52 weeks in each grade level.
Promotions are at the discretion of the agency.
Officers are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Qualifications: You qualify for the GS-5 grade level if you possess one of the following: Experience: A minimum of three (3) years full-time general work experience that demonstrates the ability to meet and deal with people and the ability to learn and be able to apply a body of facts; OR Education Substitution: A bachelor's degree or successful completion of a full four (4)-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR Combination of Experience and Education: A combination of successfully completed college education AND general work experience.
This will be calculated using your resume and official or unofficial college transcripts submitted with your application.
You qualify for the GS-7 grade level if you possess one of the following: Experience: A minimum of one (1) year of specialized full-time work experience equivalent to at least the next lower grade level that includes: Performing physical inspections of people, documents or goods for criminal activity, fraud, and/or illegal operations.
Utilizing observational techniques, evaluating facts, and reviewing documentation while applying Federal, State, or local laws and regulations.
Making determinations in compliance with laws and regulations that may lead to arrests, seizure of property, fines, and/or penalties based on findings.
OR for the GS-7 grade level: Education Substitution: A bachelor's degree with Superior Academic Achievement based on (1) class standing, (2) grade-point average (3.0 or higher), or (3) honor society membership; OR one (1) full year of graduate-level education.
This education must demonstrate the knowledge, skills, and abilities necessary to do the work; OR Combination of Experience and Education: A combination of specialized work experience equivalent to the next lower grade level AND graduate level education from an accredited college or university.
This will be calculated using your resume and official or unofficial transcripts submitted with your application.
If you have previous or current law enforcement or military law enforcement experience , you may qualify at the GS-9 grade level.
See the GS-9 Job Opportunity Announcement (JOAs) at USAJOBS, the federal government's official employment site to determine if you qualify.
Other Requirements: Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years.
Age Restriction : In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference : You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA).
The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training : You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port.
You will then attend a 101-day training program β CBP Field Operations Academy β conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA.
This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc.
Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port.
Successful completion of the Academy is required for this position .
How to Apply: Click the Apply button on this site.
You will be linked to the CBP Talent Network page.
For Position of Interest , select Customs and Border Protection Officer.
You'll then receive a link(s) to the CBPO JOA(s) on USAJOBS to complete your application.
Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit.
You will be evaluated based on your resume, supporting documents, and the CBPO Entrance Exam.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with OFO and CBP.
As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount. You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.
Conduct preventative maintenance inspections on stationary generator sets and other equipment.
Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.
Develop assembly methods when procedures are not available, documenting these methods for future reference.
Hand scrape, flake, lap, level, and align equipment components as needed.
Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.
Perform operational tests on machine tools and building equipment to ensure functionality.
Conduct preventive and predictive maintenance inspections to ensure equipment reliability.
Perform incidental rigging to facilitate work tasks.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person" includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).
~ Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.
Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.
Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
Ability to work around electromagnetic fields because of various types of production equipment.
High school graduate or GED preferred.
Relocation:
~ This position offers relocation based on candidate eligibility.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
~ This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Jul. Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount. You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.
Conduct preventative maintenance inspections on stationary generator sets and other equipment.
Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.
Develop assembly methods when procedures are not available, documenting these methods for future reference.
Hand scrape, flake, lap, level, and align equipment components as needed.
Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.
Perform operational tests on machine tools and building equipment to ensure functionality.
Conduct preventive and predictive maintenance inspections to ensure equipment reliability.
Perform incidental rigging to facilitate work tasks.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person" includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).
~ Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.
Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.
Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
Ability to work around electromagnetic fields because of various types of production equipment.
High school graduate or GED preferred.
Relocation:
~ This position offers relocation based on candidate eligibility.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
~ This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Jul. Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
The Software Certification Engineer is a cornerstone of Boeing's unwavering commitment to safety and excellence in aviation. This role is crucial in ensuring that our aircraft not only meet the regulatory standards set by the FAA but also embody the highest levels of safety and reliability. By partnering closely with the FAA, the Software Certification Engineer will help shape the future of aviation, driving innovation while safeguarding the trust of our customers and the flying public.
Join us in our mission to connect, protect, explore, and inspire the world through aerospace innovation. Lead and manage a team of engineers focused on the design, analysis, and testing of aircraft systems and components, with an unwavering commitment to safety.
Cultivate a safety-first mindset within the engineering unit, ensuring that all engineering practices prioritize the well-being of passengers and crew.
Collaborate closely with the FAA to navigate the complex certification process, ensuring that all aircraft designs comply with stringent regulatory requirements and safety standards.
Develop and implement engineering strategies that emphasize safety and reliability, aligning with Boeingβs commitment to delivering the highest quality aircraft.
Serve as the primary liaison for FAA representatives, facilitating transparent communication and collaboration throughout the certification journey.
Oversee the preparation and submission of comprehensive technical documentation required for FAA certification, ensuring that all materials reflect the highest standards of accuracy and thoroughness.
Analyze and resolve complex engineering challenges with a focus on safety, leveraging data-driven decision-making and industry best practices.
Monitor project progress and performance, ensuring that engineering solutions are delivered on time and meet all safety and certification milestones.
Citizen, lawful permanent resident, refugee, or asylee.Β
Bachelor's Degree
~9+ years of experience in RTCA DO-178(B/C) Software Considerations in Airborne Systems and Equipment Certification
~5+ yearsβ experience in software engineering
Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
~12+ years related work experience or an equivalent combination of education and experience
~ Experience with concurrent software and distributed systems
~12+ yearsβ experience in software development life cycles, configuration management and best agile software engineering practices
~9+ yearsβ experience developing, documenting and maintaining architectures, requirements, algorithms, interfaces and designs for software systems
~9+ yearsβ experience leading software development projects
~ Leads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems
~ Leads development, selection, tailoring and deployment of processes, tools and metrics
~ Experience using common software version control tools such as Git
~ Experience with Agile planning tool such as JIRA, TSF
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union : This is a union-represented position
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
The Software Certification Engineer is a cornerstone of Boeing's unwavering commitment to safety and excellence in aviation. This role is crucial in ensuring that our aircraft not only meet the regulatory standards set by the FAA but also embody the highest levels of safety and reliability. By partnering closely with the FAA, the Software Certification Engineer will help shape the future of aviation, driving innovation while safeguarding the trust of our customers and the flying public.
Join us in our mission to connect, protect, explore, and inspire the world through aerospace innovation. Lead and manage a team of engineers focused on the design, analysis, and testing of aircraft systems and components, with an unwavering commitment to safety.
Cultivate a safety-first mindset within the engineering unit, ensuring that all engineering practices prioritize the well-being of passengers and crew.
Collaborate closely with the FAA to navigate the complex certification process, ensuring that all aircraft designs comply with stringent regulatory requirements and safety standards.
Develop and implement engineering strategies that emphasize safety and reliability, aligning with Boeingβs commitment to delivering the highest quality aircraft.
Serve as the primary liaison for FAA representatives, facilitating transparent communication and collaboration throughout the certification journey.
Oversee the preparation and submission of comprehensive technical documentation required for FAA certification, ensuring that all materials reflect the highest standards of accuracy and thoroughness.
Analyze and resolve complex engineering challenges with a focus on safety, leveraging data-driven decision-making and industry best practices.
Monitor project progress and performance, ensuring that engineering solutions are delivered on time and meet all safety and certification milestones.
Citizen, lawful permanent resident, refugee, or asylee.Β
Bachelor's Degree
~9+ years of experience in RTCA DO-178(B/C) Software Considerations in Airborne Systems and Equipment Certification
~5+ yearsβ experience in software engineering
Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
~12+ years related work experience or an equivalent combination of education and experience
~ Experience with concurrent software and distributed systems
~12+ yearsβ experience in software development life cycles, configuration management and best agile software engineering practices
~9+ yearsβ experience developing, documenting and maintaining architectures, requirements, algorithms, interfaces and designs for software systems
~9+ yearsβ experience leading software development projects
~ Leads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems
~ Leads development, selection, tailoring and deployment of processes, tools and metrics
~ Experience using common software version control tools such as Git
~ Experience with Agile planning tool such as JIRA, TSF
Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union : This is a union-represented position
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. Weβre committed to fostering an environment for every teammate thatβs welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airlines is excited to offer opportunities for a Sealer Aircraft Integral Fuel Tank Components to join our Joint and Installation team in Everett and Renton , Washington .
As a Sealer for Aircraft Integral Fuel Tank Components, you will play a vital role in ensuring the highest standards of quality and safety in the sealing and assembly processes. Your responsibilities will include working from blueprints and specifications to clean surfaces, apply sealants, and prepare fuel vents for leak tests. You will also perform necessary rework and apply corrosion preventative seals to maintain the integrity of fuel tank components. Attention to detail is essential as you assist with pressure testing operations and coordinate effectively with supervisors and team members to ensure seamless communication across shifts.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
- Work from blueprints, documents, standards, and other required specifications to complete assigned tasks.
- Obtain daily work assignments from the team leader or supervisor and read Installation Plans and applicable drawings to determine work areas.
- Select appropriate cleaning solvents and clean interior and exterior surfaces prior to sealing.
- Load sealing guns and clean sealing equipment, ensuring proper functionality.
- Hand mix sealant as required and perform rework or pickups on assigned assemblies.
- Assist with pressure testing operations as assigned.
- Use specified agents and procedures for tasks such as removing protective coatings, applying corrosion inhibitors, and reactivating paint surfaces.
- Ensure proper grounding of the aircraft prior to cleaning operations and set up ventilation equipment to supply fresh air in work areas.
- Keep supervisors informed of progress and coordinate information with employees on other shifts.
- Mask areas as required to facilitate corrosion removal or painting operations.
- Prepare fuel vents for leak tests and restore them to normal after testing.
- Apply corrosion preventative seal as required and measure, layout, and apply aerodynamic seals to skin gaps on leading and trailing edge panels.
- Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
- Apply decals, metalcals, placards, and charts to specific locations on parts and assemblies as required.
Physical Demands and Potential Hazards:
- Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
- Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
- Work in environments that may involve contact with metals, solvents, and coolants.
- Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
- Adapt to varying noise levels and atmospheric conditions.
- Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a βUS Personβ as defined by 22 C.F.R. Β§ 120.15 is required. βUS Personβ includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications :
1+ years of experience with paints, coatings, finishes, and/or sealants.
Experience in handling chemicals and/or hazardous materials.
Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
Experience working from heights & using fall protection equipment with weight limitations.
Experience with safety process and/or procedures in a manufacturing or operations environment.
Experience working with tools and following work instructions.
Preferred Qualifications:
1+ year of experience performing aerospace sealing.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Completed 1+ year of aerospace sealing in high school or community and technology college academic program.
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
- Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement :
- This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $25.00/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug. 28, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
As a Painter Spray A - Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft. Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish. You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements. Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment. Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.
Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.
Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.
Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.
Mask and unmask areas to facilitate corrosion removal or painting operations.
Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.
Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.
Operate automated spray equipment, such as robots, for preparation and painting tasks.
Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.
Monitor and maintain time-sensitive materials and processes throughout the painting operation.
Support customer inspections as required and screen work instructions to ensure proper workflow.
Apply decals, part markings, and wrap finished parts or assemblies as required.
Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.
Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person" includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. 1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
~1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.
~1+ years of experience handling chemicals and/or hazardous materials
~ Experience working from heights & using fall protection equipment with weight limitations.
1+ year of experience performing aircraft or autobody painting and finishing operations.
~ Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.
High school graduate or GED preferred.
Relocation:
~ This position offers relocation based on candidate eligibility.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
~ This position is for a variety of shifts
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
As a Painter Spray A - Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft. Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish. You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements. Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment. Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.
Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.
Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.
Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.
Mask and unmask areas to facilitate corrosion removal or painting operations.
Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.
Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.
Operate automated spray equipment, such as robots, for preparation and painting tasks.
Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.
Monitor and maintain time-sensitive materials and processes throughout the painting operation.
Support customer inspections as required and screen work instructions to ensure proper workflow.
Apply decals, part markings, and wrap finished parts or assemblies as required.
Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.
Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
US Person" includes US Citizen, lawful permanent resident, refugee, or asylee
Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. 1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
~1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.
~1+ years of experience handling chemicals and/or hazardous materials
~ Experience working from heights & using fall protection equipment with weight limitations.
1+ year of experience performing aircraft or autobody painting and finishing operations.
~ Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.
High school graduate or GED preferred.
Relocation:
~ This position offers relocation based on candidate eligibility.
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
~ This position is for a variety of shifts
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
Applications for this position will be accepted until Mar. Language Requirements
English Preferred
Relocation
This position offers relocation based on candidate eligibility.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Remote working/work at home options are available for this role.