Jobs in Madison Pennsylvania

NOTE: This position must be performed in Washington, DC so relocation to Washington, DC will be required.

Recruitment Incentive: Applicants may be eligible for a $75,000 recruitment incentive in accordance with regulatory requirements. Click apply to view full details and eligibility of this recruitment incentive.

At their core, those who join the Secret Service are courageous, intelligent, strong and determined. A diverse team capable of balancing our investigative mission and fulfilling our protective legacy. Proven to be worthy of trust and confidence. Be tomorrow's Secret Service.

Duties

During the course of their careers, Secret Service Police carry out assignments in protection. Duties include:

• Providing protection for The White House Complex, The Vice President's Residence, The Main Treasury Building and Annex, and foreign diplomatic missions and embassies in the Washington, D.C. area.
• Traveling in support of the Presidential, Vice Presidential, and foreign heads of state/government missions.
• Enforcing mandated protective responsibilities as described under Title 18, United States Code, Section 3056A.

Requirements

• U.S. citizenship is required.
• Possess a current valid U.S. driver's license.
• Must be at least 21 years old at the time of application and under 40 at referral. Exceptions may apply for those with current or prior service in federal law enforcement positions covered by special retirement provisions. The Secret Service has determined that age is essential to the performance of this position.
• Carry and use a firearm. Maintaining firearm proficiency is also mandatory.
• Possess uncorrected visual acuity of no worse than 20/100 binocular. Possess corrected visual acuity of 20/20 or better in each eye.
• Hearing loss, as measured by an audiometer, must not exceed 25 decibels (A.S.A. or equivalent I.S.O.) in either ear in the 500, 1000, and 2000 Hz ranges. Applicants must be able to hear the whispered voice at 15 feet with each ear without the use of a hearing aid.
• Submit to a drug test prior to your appointment and random drug testing while you occupy the position.
• Complete 12 weeks of intensive training at the Federal Law Enforcement Training Center (FLETC) in Glynco, GA or Artesia, NM and 17 weeks of specialized training at the James J. Rowley Training Center in Laurel, MD.
• Certify that you have registered with the Selective Service System or are exempt from having to do so, if you are a male applicant born after December 31, 1959.

• Operate front-load trucks to service commercial routes as assigned.
• Pick up and empty waste or recycling containers in accordance with the route schedule.
• Inspect truck daily to ensure proper equipment operation and complete required pre- and post-trip inspections.
• Ensure containers are returned to proper location with lids closed and surrounding area clean.
• Communicate with dispatch or route supervisors regarding any issues (blocked containers, unsafe conditions, etc.).
• Follow all company, local, state, and federal safety policies and regulations.
• Report mechanical issues or safety hazards immediately.
• Maintain a clean and professional appearance of the truck.
• Provide courteous and respectful customer service at all times.

• Valid Commercial Driver's License (CDL) Class B (Class A preferred)
• Clean driving record with the ability to pass a DOT physical and drug screen
• Minimum of 1 year commercial driving experience preferred (waste industry a plus)
• Strong knowledge of DOT regulations and safe driving practices
• Ability to lift up to 50 pounds and work in varying weather conditions
• High school diploma or equivalent preferred

• Routinely exposed to outdoor weather, dust, noise, and refuse odors.
• Frequent operation of hydraulic controls and heavy machinery.
• Early morning shifts and occasional overtime required.

• Competitive pay and benefits
• Stable, year-round work
• Local routes be home every night
• Supportive team environment

• 401(k)
• 401(k) matching
• AD&D insurance
• Dental insurance
• Disability insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Compensation details: 220-250

PI6ea4c0c77d5f-26289-38111110

[Customer Support / Remote]
- Anywhere in U.S.

/ Up to $20 per hour
- As a Customer Service Rep at Promenade, you will: Provide friendly, efficient, and accurate Tier 1 support to our customers and floral partners via phone and email; Listen to customer inquiries, diagnose issues, and provide helpful solutions; Accurately identify and escalate complex technical issues to our engineering team; Ensure an outstanding experience for every customer by going the extra mile to resolve their concerns; Identify trends and suggest improvements to enhance our support processes and overall user experience...Hiring Immediately >>

Addison Group is working with a prominent manufacturing company in search for an entry level engineer with a Mechanical Engineering degree. This is onsite 5 days a week in Irwin PA, please apply to be considered.

The Engineering Coordinator provides both administrative and technical support to the Engineering Department, ensuring efficient project execution, accurate document control, and seamless coordination across functional teams including Project Management, Sourcing, Assembly, Contract Shop, Applications, Proposal Engineering, and Service.

This role plays a critical part in maintaining accurate engineering data, drawings, bills of materials (BOMs), and change orders, ensuring that information is current and effectively communicated throughout the organization.

Key Responsibilities

Project Coordination & Tracking

• Assist engineers with planning, scheduling, and tracking engineering projects
• Monitor timelines and deliverables to support on-time project completion

Documentation & Data Management

• Maintain and update engineering documentation, including drawings, BOMs, specifications, and technical files
• Process engineering change requests and change orders through established workflows
• Ensure document control processes comply with ISO standards
• Update drawings with redlines
• Generate part numbers and manage revisions

Cross-Functional Communication

• Track and manage technical support requests from Assembly, Sourcing, Service, Applications, Contract Shop, and Proposal Engineering
• Facilitate clear communication between engineering and other departments

Administrative & Systems Support

• Assist in preparing engineering KPI reports
• Capture meeting minutes and track follow-up actions
• Prepare status reports and progress updates for management

Benefits: Medical, dental, vision, 401(k)

• Ensure operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, conveyor systems, production and utility machines by following diagrams, sketches, operations manuals, manufacturer's instructions and engineering specifications.
• Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment as equipment is made available.
• Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of packaging, production and utility machines.
• Locate sources of problems by observing mechanical devices in operation, using precision measuring and testing instruments.
• Remove defective/damaged parts using items such as hoists, cranes, and hand and power tools.
• Adjust functional parts of machines and control instruments by using items such as hand tools, levels, plumb bobs, and straightedges.
• Fabricate repair parts by using machine shop instrumentation and equipment.
• Prepare and set up machinery for scheduled production runs as required.
• Work with and support Engineering during new projects and process improvement activities.
• Conserve maintenance resources by using equipment and supplies as needed to accomplish requisite tasks.
• Maintain continuity among work teams by documenting and communicating actions, issues and ongoing opportunities.
• Maintain safe and clean working environment by complying with procedures, rules and regulations.
• Ability to lift up to 50 lbs if required, and dexterity to allow looking inside of machinery, panels, overhead, and potentially awkward positions or locations to assess equipment.

• High school diploma or equivalent
• Technical, post high school training/schooling
• 7+ years of related experience, preferably in a manufacturing environment
• Food manufacturing experience preferred, but not required
• PLC experience, VFD experience highly preferred

• Warehouse & Production

• Technical liaison between factory personnel, sanitation chemical supplier, Corporate Quality Assurance, and any third-party supporting provider.
• Develop, implement, and maintain the sanitation program, including cleaning schedules MSS, standard operating procedures (SOPs), and sanitation practices
• Partner with chemical suppliers to provide chemical safety training, which meets all requirements of Tandem Foods Environmental, Health and Safety programs
• Work with the plant leadership team to ensure all sanitation programs and systems are implemented
• Ensure compliance with the Tandem Foods Sanitation Policy and Pest Control Standard
• Partner and execute cleaning verification and validation programs to prove effectiveness of the sanitation program and sanitation standard operating procedures
• Develop and provide technical expertise for managing and troubleshooting environmental pathogen monitoring programs
• Ensure compliance with food safety regulations, including FSMA, HACCP, and other relevant local, state, and federal requirements
• Monitor and verify the effectiveness of the sanitation processes, including conducting regular audits and inspections
• Manage and maintain sanitation documentation, including post sanitation cleaning logs, audit reports, and corrective action preventative action records
• Implement and train including but not limited to performance management and employee development, etc.

• Bachelor's degree in food science, Microbiology, Environmental Health, or a related field, or equivalent work experience
• Minimum of 5 years of experience in sanitation management within the food manufacturing industry
• Strong knowledge of food safety standards, including HACCP, FSMA, and GMP
• Proven leadership and team management skills, with the ability to train and motivate staff
• Excellent organizational, communication, and problem-solving skills
• Proficiency in Microsoft Office and familiarity with sanitation management software
• Ability to work flexible hours, including nights and weekends, as needed

• Work is performed in a manufacturing environment with exposure to cleaning chemicals, moving machinery, and varying temperatures
• Physical demands include standing for extended periods, walking, bending, and lifting up to 50 pounds
• Personal protective equipment (PPE) is required during sanitation activities

• Ensure that all sanitation activities comply with OSHA and company safety standards
• Conduct risk assessments and implement preventive measures to minimize the risk of contamination and foodborne illness
• Work closely with Quality Assurance and Production teams to resolve sanitation-related issues promptly and effectively

• Warehouse & Production

• Technical liaison between factory personnel, sanitation chemical supplier, Corporate Quality Assurance, and any third-party supporting provider.
• Develop, implement, and maintain the sanitation program, including cleaning schedules MSS, standard operating procedures (SOPs), and sanitation practices
• Partner with chemical suppliers to provide chemical safety training, which meets all requirements of Tandem Foods Environmental, Health and Safety programs
• Work with the plant leadership team to ensure all sanitation programs and systems are implemented
• Ensure compliance with the Tandem Foods Sanitation Policy and Pest Control Standard
• Partner and execute cleaning verification and validation programs to prove effectiveness of the sanitation program and sanitation standard operating procedures
• Develop and provide technical expertise for managing and troubleshooting environmental pathogen monitoring programs
• Ensure compliance with food safety regulations, including FSMA, HACCP, and other relevant local, state, and federal requirements
• Monitor and verify the effectiveness of the sanitation processes, including conducting regular audits and inspections
• Manage and maintain sanitation documentation, including post sanitation cleaning logs, audit reports, and corrective action preventative action records
• Implement and train including but not limited to performance management and employee development, etc.

• Bachelor's degree in food science, Microbiology, Environmental Health, or a related field, or equivalent work experience
• Minimum of 5 years of experience in sanitation management within the food manufacturing industry
• Strong knowledge of food safety standards, including HACCP, FSMA, and GMP
• Proven leadership and team management skills, with the ability to train and motivate staff
• Excellent organizational, communication, and problem-solving skills
• Proficiency in Microsoft Office and familiarity with sanitation management software
• Ability to work flexible hours, including nights and weekends, as needed

• Work is performed in a manufacturing environment with exposure to cleaning chemicals, moving machinery, and varying temperatures
• Physical demands include standing for extended periods, walking, bending, and lifting up to 50 pounds
• Personal protective equipment (PPE) is required during sanitation activities

• Ensure that all sanitation activities comply with OSHA and company safety standards
• Conduct risk assessments and implement preventive measures to minimize the risk of contamination and foodborne illness
• Work closely with Quality Assurance and Production teams to resolve sanitation-related issues promptly and effectively

• Warehouse & Production

• Ensure operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, conveyor systems, production and utility machines by following diagrams, sketches, operations manuals, manufacturer's instructions and engineering specifications.
• Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment as equipment is made available.
• Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of packaging, production and utility machines.
• Locate sources of problems by observing mechanical devices in operation, using precision measuring and testing instruments.
• Remove defective/damaged parts using items such as hoists, cranes, and hand and power tools.
• Adjust functional parts of machines and control instruments by using items such as hand tools, levels, plumb bobs, and straightedges.
• Fabricate repair parts by using machine shop instrumentation and equipment.
• Prepare and set up machinery for scheduled production runs as required.
• Work with and support Engineering during new projects and process improvement activities.
• Conserve maintenance resources by using equipment and supplies as needed to accomplish requisite tasks.
• Maintain continuity among work teams by documenting and communicating actions, issues and ongoing opportunities.
• Maintain safe and clean working environment by complying with procedures, rules and regulations.
• Ability to lift up to 50 lbs if required, and dexterity to allow looking inside of machinery, panels, overhead, and potentially awkward positions or locations to assess equipment.

• High school diploma or equivalent
• Technical, post high school training/schooling
• 7+ years of related experience, preferably in a manufacturing environment
• Food manufacturing experience preferred, but not required
• PLC experience, VFD experience highly preferred

• Warehouse & Production

• Adhere to Good Manufacturing Practices (GMPs) and all food safety/quality requirements under SQF/BRC.
• Maintain safe work practices, including proper forklift operation, safe driving speeds, horn usage, and seatbelt compliance.
• Review production sheets to identify and resolve inventory discrepancies.
• Accurately pick customer orders by interpreting pick-tickets and using RF scanner systems.
• Load and unload transport vehicles, ensuring products are securely and evenly placed.
• Maintain forklift equipment, complete daily inspections, and ensure proper shutdown and charging procedures.
• Document all shipping and receiving activities thoroughly and accurately.
• Follow FIFO (First-In, First-Out) procedures for all warehouse inventory unless otherwise directed.
• Strictly adhere to company inventory control and MRP system policies.
• Perform preventive maintenance and housekeeping tasks to keep warehouse areas safe and organized.
• Support other warehouse or production-related duties as assigned.

• Strong mathematical and reading comprehension skills with mechanical aptitude.
• Working knowledge of MRP systems and RF scanner technology.
• Good verbal and written communication skills.
• Ability to operate forklifts and other warehouse equipment safely (certification required).
• High attention to detail with strong organizational skills.
• Flexibility to work different shifts or extended hours as business needs require.
• Physical ability to lift up to 50 lbs. regularly.

• High School Diploma or equivalent required.
• Valid forklift certification.
• Minimum 1-3 years of warehouse, distribution, or manufacturing experience preferred.
• Experience in food manufacturing/warehousing environment is a plus.
• Willingness to work flexible shifts, including evenings or weekends as needed.

• This position works primarily in a manufacturing floor and warehouse setting.
• May be exposed to varying temperatures, moving equipment, and moderate noise levels.
• Evening and weekend work may be required as needed.

• Warehouse & Production