Jobs in Laurel Florida Remote

Do you want to become a surrogate? We are now offering a sign on bonus to all qualified and matched surrogates that sign contracts. The first step is to fill out our surrogate application. A fertility specialist will contact you to continue the process. For intended parents interested in surrogacy to start or grow their families please contact us today. The surrogacy process is complex, but we will be with you every step of the way. Call today to get started.

Women who may have the ability to produce eggs but are unable to use their uterus or do not have a uterus, may consider a surrogate. A donated egg may also be used with the surrogate in the event a woman cannot produce her own eggs or her uterus is not intact or insufficient to carry a pregnancy. In either case, the husband's sperm, if viable, may be used.

Using an egg donor unrelated to the surrogate carrier eliminates any biological tie. The egg of the surrogate is never used as part of the assisted reproduction process, so that a surrogate is never in the position of delivering her own biological child.

The basic requirements of a woman to serve as a surrogate are:

• Emotionally stable
• Responsible
• In good physical health
• Non-smoker
• Has had at least one successful pregnancy
• Is capable of carrying a child to full term

A woman is not required to fall within a particular age range to serve as a surrogate, but most intended parents prefer a surrogate under the age of 40. For more information on surrogacy please see the documents on the left side of this page.

In Texas, there is a judicial process for validating the Gestational Contract (the contract between the intended parents and the surrogate). Included within the various requirements for having a Gestational Contract validated by a Texas court is that the intended parents must be married and the surrogate must have previously carried a child to term. Additionally, there are residency requirements that apply to either the surrogate or the intended parents, but not both.

Compensation for a surrogate services generally starts in the range of $35,000 - $40,000, for base compensation with over all fees up to 70k, in many cases. The amount of compensation is dependent upon a variety of factors, including, but not limited to, whether the surrogate carries twins, what procedures a surrogate is required to undergo and whether the delivery is vaginally or by cesarean section.

A growing production facility in North Venice is looking for a motivated individual to join their team printing high-quality graphics used for packaging and consumer products.

This entry-level position offers hands-on experience with advanced printing and production technology, along with the opportunity to grow into future leadership roles.

Responsibilities:

• Prepare and print design graphics for product packaging and labels

• Work with computer graphics systems and printing technology

• Ensure color accuracy and quality standards are met

• Operate production equipment used in printed label production

• Follow production specifications and production guidelines

Preferred Skills:

• Knowledge of computer graphics

• Experience with Macintosh systems

• Familiarity with Adobe Photoshop

• Strong attention to detail and color accuracy

What’s Offered:

• Starting pay of $20 per hour

• Pay increases based on experience and education

• Benefits and 401(k) available

• Opportunity for long-term career growth and advancement

This is a great opportunity for someone interested in graphics, printing, and production technology who is looking to grow with a company long term.

ABOUT OUR CLIENT

Multifamily Owner/Builder actively seeking a Lead Superintendent to lead Multifamily projects through to completion. Lead Superintendent will have the opportunity to work on site for projects throughout the Sarasota area.

Client is a Florida based Developer turned Owner/Builder. They have a massive pipeline with a project starting in Venice.

JOB DESCRIPTION

The Superintendent will have a strong track record of completing Ground Up Multifamily Construction, ensuring their successful delivery within schedule and budget along with the ability to manage vendors, subcontractors, field staff throughout project.

Select Responsibilities:

• Provide field oversight for all phases of assigned construction projects
• Experience with Ground up multifamily projects (garden and podium style)
• Develop and manage project schedules.
• Manage subcontractor performance relationships.
• Be responsible for both the timeliness and total quality of assigned projects.
• Prepare project documentation for coordination and effective site management.
• Implement and execute Quality Control/Quality Assurance program.
• Promote an Injury-free job site through safety initiatives and award winning Company safety program.

CANDIDATE QUALIFICATIONS

• 8-20 years of construction management and/or craft supervisor experience
• Engineering, Construction Management or Architectural degree, or equivalent experience
• Exceptional knowledge of construction processes and procedures; ability to successfully manage complex projects through to completion
• Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers
• Ability to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service
• Displays willingness to make decisions and includes the appropriate people within the decision making process
• Ability to use time productively, maximize efficiency and meet challenging work goals
• Ability to maintain compliance with all company policies and procedures
• Observes safety and security procedures and reports potentially unsafe conditions
• Looks for ways to continuously improve both personally and professionally
• Must be willing to travel on site to locations nationally
• Knowledge of all phases of multifamily construction.

WHAT'S ON OFFER

• Competitive base salary ($120,000 - $170,000) plus compensation package to include medical/dental/vision options, 401k, bonus (project/annual), PTO, vehicle allowance or company vehicle, per diem (if traveling), and growth potential
• Opportunity to join a reputable firm with strong pipeline of projects

NCN Electric is a growing commercial electrical contractor serving Florida’s west central coast, and we are looking for a Senior Estimator to join our team in Venice, FL. The Estimator will prepare accurate electrical estimates, manage bid timelines, and collaborate with internal teams, vendors, and general contractors to support successful project pursuit and execution.

Work Schedule

Monday & Friday remote flexibility depending on workload and coordination

Tuesday-Thursday at office in Venice, Florida

Responsibilities

1. Mentor team members, strengthen and support estimating procedures and best practices
2. Maintain and expand relationships with general contractors, qualified sub-contractors, vendors and partners
3. Analyze blueprints, specifications, and project documentation
4. Manage estimating workflow, bid schedules, and deadlines
5. Prepare and conduct onscreen quality overlays, takeoffs and descriptive narratives
6. Maintain organized estimating notes and pipeline tracking
7. Review, evaluate and present bid proposals and completed estimates internally and support client discussions
8. Ensure compliance with safety, quality, and regulatory requirements
9. Collaborate with internal operations team, vendors, subcontractors, and clients to clarify and develop scope narratives and pricing

Qualifications

• 7-15+ years of commercial electrical estimating experience preferred
• Experience estimating projects typically in the $2M to $5M range preferred
• Proven ability to mentor estimators and develop estimating processes
• Established relationships within the construction industry preferred
• Proficient in estimating software (e.g. Bluebeam, Accubid, Microsoft365)
• Excellent communication skills
• Proven ability to lead effectively and a collaborative work style

Benefits

• Health insurance (NCN pays about 80 percent of employee premium)
• 401(k) plan
• PTO
• Paid holidays
• Dental and Vision insurance
• Life insurance
• Opportunities for continued professional growth and advancement

Compensation

• $90,000-$125,000 paid annually
• Based on experience and qualifications

Apply on Indeed, Linked In or email your resume to

This is more than a bidding role. We are seeking someone who wants to be part of a company that is actively investing in its people, processes, and long-term growth while maintaining an employee-centered culture built on teamwork, professionalism, and opportunity.

NCN Electric operates a state credentialed electrical apprenticeship program, reflecting our commitment to developing talent from within and building a stronger future for our workforce and the industry. The estimator we hire will play an important role in supporting that growth and positioning the company for continued success.

Who We Are

At Loyola Medicine, we are driven by a mission to serve. As part of a nationally recognized, faith‑based healthcare system, we are committed to becoming the most trusted partner in the health of our communities and each person we serve.

Join a team that values compassion, clinical excellence, continuous learning, and collaboration.

Why You’ll Love This Role

• Work with cutting‑edge cardiac and vascular imaging technology in a high‑acuity hybrid OR/Cath Lab
• Join a supportive, experienced team dedicated to exceptional patient care
• Opportunity to train into a specialized cardiovascular role—new Radiologic Technologists encouraged to apply
• Grow your skills in a department known for clinical excellence, teamwork, and continuous learning

What You’ll Do

• Support diagnostic and interventional cardiac and peripheral vascular procedures following sterile technique
• Operate fluoroscopy, C‑arm, PACS, and hemodynamic monitoring systems
• Prepare procedure rooms, position patients, and ensure safe and accurate imaging
• Assist physicians during Cath Lab cases, monitor vital signs, and contribute to optimal procedural flow
• Participate in the on‑call rotation, supporting emergent cases when needed

Schedule

• PRN / Registry
• 7:00am–3:30pm
• Flexibility required for on‑call and occasional extended shifts depending on case volume

What We’re Looking For

Education

• Associate’s degree in Radiologic Technology or equivalent experience/training

Licensure & Certifications

• ARRT certification
• IEMA license (Illinois Emergency Management Agency)
• AHA CPR (BLS)

Skills & Qualifications

• New RT graduates welcome—training provided for the right candidate
• Strong communication and teamwork abilities
• Ability to thrive in a fast‑paced, procedural environment with cardiac/vascular teams

Perks & Benefits:

• Benefits from Day One (Medical and Dental)
• Competitive Shift Differentials 
• Career Development
• Tuition Reimbursement
• Participation in the Public Service Loan Forgiveness Program
• 403(b) with Employer Match
• On Site Fitness Center (Gottlieb Memorial Hospital & LUMC)
• Referral Rewards
• Perks Program

Pay Range: $30.99 - $50.71 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Position Purpose

The Respiratory Therapist shall be responsible for the administration of respiratory care offered by the Respiratory Care Department

What you will do

• ​Function clinically with a considerable amount of independent judgment regarding the delivery of quality patient care

• Serve as a technical resource person to the physicians and other health care workers, with regard to current practices in respiratory care

• Set up, operate and manage patient care on respiratory related equipment such as mechanical ventilators, NIPPV/CPAP, or High Flow Oxygen devices

• Manage patients on invasive mechanical ventilation modes (AC, PSV, PC, APRV, Bi-level)

Minimum Qualifications

• Graduate of an accredited school of Respiratory Care, minimum of a two-year Associate's Degree

• Current State of CT Respiratory Care Practitioner License

• Registered Respiratory Therapist (RRT) or Certified (CRT) by the National Board of Respiratory Care (NBRC). 

• Thorough knowledge of the procedures and patient care techniques involved in the delivery of respiratory care

Position Highlights and Benefits

• per diem, choose 8hr or 12hr night shifts

• excellent shift and weekend differentials

Pay Range: flat rate base: $38.70 CRT $42.25 RRT plus diffs

Ministry/Facility Information

Mercy Medical Center has established itself as one of the leading providers of health care services in Western Massachusetts. Mercy Medical Center is a 182-bed acute care hospital in Springfield. Other facilities include Mercy's Rehabilitation Hospital, a comprehensive hospital-based rehabilitation center on the campus of Mercy Medical Center and Brightside for Families and Children, an outpatient service offering counseling and family support programs

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

What to expect as a Nursing Supervisor at Saint Mary's Home  

Under the direction of the Director of Nursing Service, the Nursing Supervisor is responsible for the overall coordination and delivery of resident care and clinical supervision of staff on an assigned shift. The Nursing Supervisor is empowered and accountable for taking all reasonable steps to ensure that all staff promote and deliver a level of care that meets or exceeds our residents’ expectation. The Nursing Supervisor will assure that all assigned staff are active participants in the interdisciplinary care team designed to maximize each resident’s potential for independence and autonomy. Functions as the administrative representative designee in the absence of administration in the building. 

REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: 

1. Education - Graduate of an accredited school of nursing. 

2. Current licensure as a Registered Nurse in the State of Connecticut. 

3. Three years in Clinical practice, with one year in long-term care required. 

4. Acute care and supervisory experience preferred. 

5. Excellent communication and assessment skills required. 

6. Working knowledge of OBRA, State and JCAHO regulatory requirements. 

7. Computer literacy strongly preferred. 

8. CPR certification. 

9. Must be able to safely perform the essential job functions with or without reasonable Accommodation. 

What We Offer 

• DailyPay – Access your earnings when you need them 

• Generous PTO for full-time and part-time colleagues 

• Up to $4,000 in annual tuition reimbursement 

• Competitive compensation and shift differentials 

• Employee Assistance Program (EAP) including: 

• Financial wellness: saving, budgeting, and investing guidance 

• Mental health: counseling and stress management tools 

• Work-life support: legal, educational, and lifestyle resources 

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Wichita, KS (Remote)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22

PI28d909dffe6f-38

Power Distribution and Make Ready Designer

Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work

Location: Knoxville, TN (Remote)

Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth.

ABOUT THIS OPPORTUNITY
We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems.

In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered.

Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters.

WHAT YOU WILL DO
• Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations
• Apply established engineering design standards, NESC requirements, and internal processes
• Perform end-to-end make-ready, joint-use, and/or general distribution design
• Conduct permitting and easement research (pole ownership, ROW, property rights, approvals)
• Collaborate with team members to resolve design challenges and ensure accurate deliverables
• Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems
• Perform quality control reviews when required
• Support additional duties as assigned

TOP COMPETENCIES & SKILLS
Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready

WHAT WE’RE LOOKING FOR
• High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred
• Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred)
• Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages
• Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred
• Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently
• Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings
• Authorization to work in the United States is required
• Willingness to travel occasionally, including minimal overnight travel when project needs require
• Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate

PHYSICAL REQUIREMENTS
• Ability to work for extended periods using a computer keyboard, monitor, and telephone
• Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment
• Ability to communicate effectively through oral and written channels

ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.

*To learn more about working at Sigma, view our video and career page.
* If you do not have Power Design experience, please refer to our other open positions: *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.

WHAT WE OFFER
We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus:

• No-cost monthly healthcare plan option for employees
• Competitive pay
• Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
• 401(k) plan with matching contributions up to 5% of salary
• Paid holidays, vacation, and sick time
• Education and professional licensing assistance programs

This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.

Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.

PM22

PIc6dba56b523