Jobs in Lakeville, MI
205 positions found — Page 9
N
Assembly Operator 3rd Shift
Salary not disclosed
Nesco Resource is seeking an Assembly Operator for our client in Leonard.
This is a 3rd Shift Position, 11 PM-7:30 AM.
This client produces and assembles small plastic parts for the Fluid Handling Systems.
Primary Responsibilities: Promotes an atmosphere of awareness of health, safety, and environmental practices in support of the HSE/EMS policies daily.
Perform daily job duties outlined by the Quality Policy.
Understands and performs daily job duties in a manner that supports the Plant goals and Quality objectives.
Responsible for following Plant policies, procedures, and work instructions.
Assists in monitoring, communicating, and improving O.E.E on processes that are being run.
Verifies lot numbers, lot traceability sheet, and assures that components correspond.
Responsible for filling out lot traceability sheets, in-process papers, and the operator logbook.
Verifies bar code and visual aid.
Verifies quality parts are being produced by performing hourly visual aid checks (5 pcs.
minimum).
Responsible for keeping the work area clean, ensuring that dropped product is scrapped properly.
Performs other duties assigned.
Assists in monitoring, communications, and improving efficiency on processes for which the Operator is responsible.
Work Environment/Work Conditions: Production floor environment.
Must wear proper personal protection equipment while on the manufacturing floor.
Equipment used requires proper training on the potential for and avoidance of injury.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
This is a 3rd Shift Position, 11 PM-7:30 AM.
This client produces and assembles small plastic parts for the Fluid Handling Systems.
Primary Responsibilities: Promotes an atmosphere of awareness of health, safety, and environmental practices in support of the HSE/EMS policies daily.
Perform daily job duties outlined by the Quality Policy.
Understands and performs daily job duties in a manner that supports the Plant goals and Quality objectives.
Responsible for following Plant policies, procedures, and work instructions.
Assists in monitoring, communicating, and improving O.E.E on processes that are being run.
Verifies lot numbers, lot traceability sheet, and assures that components correspond.
Responsible for filling out lot traceability sheets, in-process papers, and the operator logbook.
Verifies bar code and visual aid.
Verifies quality parts are being produced by performing hourly visual aid checks (5 pcs.
minimum).
Responsible for keeping the work area clean, ensuring that dropped product is scrapped properly.
Performs other duties assigned.
Assists in monitoring, communications, and improving efficiency on processes for which the Operator is responsible.
Work Environment/Work Conditions: Production floor environment.
Must wear proper personal protection equipment while on the manufacturing floor.
Equipment used requires proper training on the potential for and avoidance of injury.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
N
Hi-lo Driver
🏢 Nesco Resource
Salary not disclosed
Nesco Resource is seeking an experienced Hi-lo driver to join the team at our long-term client in Orion Township.
We are seeking a long-term, dedicated associate to assist in the warehouse.
Schedule: The schedule for the position will be 6 am to 2 pm, Monday-Friday.
If OT is required, it will mean staying after 2 PM.
Payrate: Payrate will be $18-$20 an hour, depending on experience.
Will need to show proof of being HiLo certified.
Essential duties include: • Prepares parts to be delivered to Oxus based on need and stock level.
• Completes deliveries to and from both Oxus facilities.
• Enforces inventory controls by collecting stock location orders and printing requests.
• Maintains a safe and clean work environment by keeping shelves, pallet area, and workstations neat and organized.
• Promotes a clean shipping supply area by complying with procedures, rules, and regulations.
• Escalates issues to the manager and recommends potential solutions.
• Performs Preventive Maintenance on all equipment at the warehouse.
• Performs inventory cycle counting daily.
Skills and Attributes: • Ability to lead by example, gain respect from the team, and communicate clearly across all departments.
• Excellent verbal and written communication skills; organization and problem-solving skills • Ability to manage a wide variety of activities at the same time.
Qualified applicants: • High school diploma, 2-4 years related experience and/or training; or equivalent combination of education and experience.
• Must be trained and possess a Fork Truck license • Must hold and maintain a good vehicle driving record.
• Computer Skills: Word processing, spreadsheets, email, inventory, and manufacturing software a plus • Must be an employee in good standing (reliable attendance, no performance issues, etc.), positive attitude, and ready to take on a new challenge! COM032 Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
We are seeking a long-term, dedicated associate to assist in the warehouse.
Schedule: The schedule for the position will be 6 am to 2 pm, Monday-Friday.
If OT is required, it will mean staying after 2 PM.
Payrate: Payrate will be $18-$20 an hour, depending on experience.
Will need to show proof of being HiLo certified.
Essential duties include: • Prepares parts to be delivered to Oxus based on need and stock level.
• Completes deliveries to and from both Oxus facilities.
• Enforces inventory controls by collecting stock location orders and printing requests.
• Maintains a safe and clean work environment by keeping shelves, pallet area, and workstations neat and organized.
• Promotes a clean shipping supply area by complying with procedures, rules, and regulations.
• Escalates issues to the manager and recommends potential solutions.
• Performs Preventive Maintenance on all equipment at the warehouse.
• Performs inventory cycle counting daily.
Skills and Attributes: • Ability to lead by example, gain respect from the team, and communicate clearly across all departments.
• Excellent verbal and written communication skills; organization and problem-solving skills • Ability to manage a wide variety of activities at the same time.
Qualified applicants: • High school diploma, 2-4 years related experience and/or training; or equivalent combination of education and experience.
• Must be trained and possess a Fork Truck license • Must hold and maintain a good vehicle driving record.
• Computer Skills: Word processing, spreadsheets, email, inventory, and manufacturing software a plus • Must be an employee in good standing (reliable attendance, no performance issues, etc.), positive attitude, and ready to take on a new challenge! COM032 Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
N
Fabricator - 1st Shift
🏢 Nesco Resource
Salary not disclosed
Nesco Resource is seeking a Fabricator to join the team of one of our long-term clients in the Rochester Hills area.
This is 1st shift opportunity that runs Monday through Friday from 8 am to 5 pm.
Pay is based on experience.
The Fabricator fabricates rubber; picks, packs, and ships supplies and materials to customers accurately and timely; efficiently and safely transports, sorts, and stocks materials.
Main Responsibilities: Transports incoming and outgoing materials to designated areas utilizing appropriate tools/vehicles to accomplish tasks including but not limited to hand dolly, forklift, and/or pallet jack.
Fabricates rubber into strips, rolls, sheets, gaskets, etc.
Hand cutting is involved.
Fabricates hose assemblies (Teflon, rubber, metal, etc.) and completes pressure testing.
Completes basic blueprint reading.
Performs quality inspections on incoming and outgoing materials and products.
Sorts and places materials or items on racks, shelves, or bins according to predetermined inventory procedures.
Picks, packs, and ships materials and products.
Processes all packages for shipping; processes returned merchandise.
Conducts physical inventory counts Maintains a safe, clean working environment.
Participates in quality improvement efforts.
Demonstrates teamwork and a positive attitude consistently.
Ensures that operational supplies for the warehouse are on hand by reporting low quantities to supervisor promptly before running out.
Performs required administrative tasks; prepares all required reports and correspondence.
Performs other related duties as assigned by management.
QUALIFICATIONS: One to two years of related experience or equivalent Familiarity with shipping practices and handling methods Ability to work with minimal supervision Commitment to excellence and high standards Excellent written and oral communication skills Strong organizational, problem-solving, and analytical skills Familiarity with fraction and decimal formats from 1/32 " to 2 " Ability to manage priorities and workflow Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm Acute attention to detail Ability to read blueprints Ability to utilize and interpret a tape measure accurately Familiarity with basic shop tools Proven ability to handle multiple projects and meet deadlines Strong interpersonal skills Ability to understand and follow written and verbal instructions Valid Driver's License Forklift experience/certification preferred Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
This is 1st shift opportunity that runs Monday through Friday from 8 am to 5 pm.
Pay is based on experience.
The Fabricator fabricates rubber; picks, packs, and ships supplies and materials to customers accurately and timely; efficiently and safely transports, sorts, and stocks materials.
Main Responsibilities: Transports incoming and outgoing materials to designated areas utilizing appropriate tools/vehicles to accomplish tasks including but not limited to hand dolly, forklift, and/or pallet jack.
Fabricates rubber into strips, rolls, sheets, gaskets, etc.
Hand cutting is involved.
Fabricates hose assemblies (Teflon, rubber, metal, etc.) and completes pressure testing.
Completes basic blueprint reading.
Performs quality inspections on incoming and outgoing materials and products.
Sorts and places materials or items on racks, shelves, or bins according to predetermined inventory procedures.
Picks, packs, and ships materials and products.
Processes all packages for shipping; processes returned merchandise.
Conducts physical inventory counts Maintains a safe, clean working environment.
Participates in quality improvement efforts.
Demonstrates teamwork and a positive attitude consistently.
Ensures that operational supplies for the warehouse are on hand by reporting low quantities to supervisor promptly before running out.
Performs required administrative tasks; prepares all required reports and correspondence.
Performs other related duties as assigned by management.
QUALIFICATIONS: One to two years of related experience or equivalent Familiarity with shipping practices and handling methods Ability to work with minimal supervision Commitment to excellence and high standards Excellent written and oral communication skills Strong organizational, problem-solving, and analytical skills Familiarity with fraction and decimal formats from 1/32 " to 2 " Ability to manage priorities and workflow Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm Acute attention to detail Ability to read blueprints Ability to utilize and interpret a tape measure accurately Familiarity with basic shop tools Proven ability to handle multiple projects and meet deadlines Strong interpersonal skills Ability to understand and follow written and verbal instructions Valid Driver's License Forklift experience/certification preferred Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
M
Contracts Manager - Major Projects (Post Awards)
Salary not disclosed
Contracts Manager
- Major Projects (Post Award) Oakland or San Ramon, CA (hybrid) Perm Positions This Contracts Manager will be a part of the first dedicated procurement function for capital projects.
This role is responsible for ensuring effective contract execution, compliance, and performance management across large-scale capital projects.
This role serves as the primary liaison between internal stakeholders, suppliers, and project teams to drive timely delivery, control costs, mitigate risk, and maintain contractual integrity.
Job Responsibilities Manages all post-award activities for multiple major project contracts, including change orders, amendments, renewals, and closeouts Monitor supplier performance to ensure compliance with contractual terms, service levels, and safety requirements Support creating clear contracts and ensuring thorough documentation, and implementing effective communication and dispute resolution strategies.
Support developing contract management work process, and enforcing procedures for handling change orders and amendments; ensure all parties agree on adjustments in accordance with contract terms.
Leads the most complex cross-functional projects and contracts Advises senior leadership (internal and external) on contracting strategy and negotiations.
Negotiates the most complex contract issues independently.
Leads the effort to identify, analyze, improve existing business processes, or create new ones within the department to meet new goals and objectives.
Works closely with key stakeholders such as Project Management Director, PMO Director, Engineering Director, and others to ensure alignment.
Acts as a primary liaison for the contracts team to Legal Department.
Provides active guidance, support, mentorship and training to less experienced contract management staff.
Develops and delivers contract management training to all stakeholders.
Collaborates with other Lines of Business to promote knowledge sharing and use of best practices.
Experience in major construction project controls, cost estimating, terms and conditions negotiations, and scheduling.
Subject matter expertise with composition, management, administration, and negotiation of engineering and construction contracts and change orders Requirements Bachelor’s (BA/BS) degree or equivalent experience Demonstrated experience in the utilities or infrastructure sectors U.S.
experience and familiarity with U.S.
utility-sector contracting practices.
Hands-on post-award contract administration.
Experience leading teams and managing direct reports.
Nine (9) years of experience in a similar role executing and managing contracts for major heavy civil, pipeline, or industrial construction projects Experience in developing and managing complex contracting strategies EPC/CMAR/PDB/DB/GMP.
Experience with quality assurance (QA) and quality control (QC) regarding contract documents.
Ability to apply business knowledge, project management methodologies, and best practices.
Knowledge of budget and resource allocation and formulation of contracts, bids, agreements, and RFPs.
Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences.
Desired Master’s degree in Construction Management or related discipline Certification such as one of the following or related: Project Management Professional (PMP) Program Management Professional (PgMP) Certified Cost Engineer (CCE) certificate Lean six sigma certification, green or black belt Advanced proficiency with Microsoft Office applications (Word, Excel, PowerPoint, and Outlook) and contract information systems and applications (e.g.
SRM, Ariba, SAP, scheduling software).
- Major Projects (Post Award) Oakland or San Ramon, CA (hybrid) Perm Positions This Contracts Manager will be a part of the first dedicated procurement function for capital projects.
This role is responsible for ensuring effective contract execution, compliance, and performance management across large-scale capital projects.
This role serves as the primary liaison between internal stakeholders, suppliers, and project teams to drive timely delivery, control costs, mitigate risk, and maintain contractual integrity.
Job Responsibilities Manages all post-award activities for multiple major project contracts, including change orders, amendments, renewals, and closeouts Monitor supplier performance to ensure compliance with contractual terms, service levels, and safety requirements Support creating clear contracts and ensuring thorough documentation, and implementing effective communication and dispute resolution strategies.
Support developing contract management work process, and enforcing procedures for handling change orders and amendments; ensure all parties agree on adjustments in accordance with contract terms.
Leads the most complex cross-functional projects and contracts Advises senior leadership (internal and external) on contracting strategy and negotiations.
Negotiates the most complex contract issues independently.
Leads the effort to identify, analyze, improve existing business processes, or create new ones within the department to meet new goals and objectives.
Works closely with key stakeholders such as Project Management Director, PMO Director, Engineering Director, and others to ensure alignment.
Acts as a primary liaison for the contracts team to Legal Department.
Provides active guidance, support, mentorship and training to less experienced contract management staff.
Develops and delivers contract management training to all stakeholders.
Collaborates with other Lines of Business to promote knowledge sharing and use of best practices.
Experience in major construction project controls, cost estimating, terms and conditions negotiations, and scheduling.
Subject matter expertise with composition, management, administration, and negotiation of engineering and construction contracts and change orders Requirements Bachelor’s (BA/BS) degree or equivalent experience Demonstrated experience in the utilities or infrastructure sectors U.S.
experience and familiarity with U.S.
utility-sector contracting practices.
Hands-on post-award contract administration.
Experience leading teams and managing direct reports.
Nine (9) years of experience in a similar role executing and managing contracts for major heavy civil, pipeline, or industrial construction projects Experience in developing and managing complex contracting strategies EPC/CMAR/PDB/DB/GMP.
Experience with quality assurance (QA) and quality control (QC) regarding contract documents.
Ability to apply business knowledge, project management methodologies, and best practices.
Knowledge of budget and resource allocation and formulation of contracts, bids, agreements, and RFPs.
Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences.
Desired Master’s degree in Construction Management or related discipline Certification such as one of the following or related: Project Management Professional (PMP) Program Management Professional (PgMP) Certified Cost Engineer (CCE) certificate Lean six sigma certification, green or black belt Advanced proficiency with Microsoft Office applications (Word, Excel, PowerPoint, and Outlook) and contract information systems and applications (e.g.
SRM, Ariba, SAP, scheduling software).
Not Specified
N
Warehouse Associate
🏢 Nesco Resource
Salary not disclosed
Job Title: Warehouse Associate Location: Rochester, NY Summary: We are hiring a Warehouse Associate to support order fulfillment operations in a busy hardware and fastener distribution facility.
This is a temp-to-hire opportunity ideal for someone comfortable with hands-on work, using ladders, and working in a fast-paced warehouse environment.
The role primarily focuses on picking and packing customer orders with accuracy and efficiency.
Shift: Monday – Friday, 7:30 AM – 4:30 PM Pay Rate: $19.00/hour Key Responsibilities: Pick items for orders according to pick sheets or scanning systems Pack and label customer orders for shipment Use ladders to access shelving and storage areas as needed Maintain a clean and organized workspace Assist with inventory control and cycle counts Follow safety and warehouse procedures Perform other warehouse duties as assigned Qualifications: Previous warehouse or order fulfillment experience preferred Must be comfortable using ladders regularly Ability to lift up to 50 lbs and stand for most of the shift Strong attention to detail and commitment to accuracy Dependable with good attendance and punctuality Basic math and reading skills Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
This is a temp-to-hire opportunity ideal for someone comfortable with hands-on work, using ladders, and working in a fast-paced warehouse environment.
The role primarily focuses on picking and packing customer orders with accuracy and efficiency.
Shift: Monday – Friday, 7:30 AM – 4:30 PM Pay Rate: $19.00/hour Key Responsibilities: Pick items for orders according to pick sheets or scanning systems Pack and label customer orders for shipment Use ladders to access shelving and storage areas as needed Maintain a clean and organized workspace Assist with inventory control and cycle counts Follow safety and warehouse procedures Perform other warehouse duties as assigned Qualifications: Previous warehouse or order fulfillment experience preferred Must be comfortable using ladders regularly Ability to lift up to 50 lbs and stand for most of the shift Strong attention to detail and commitment to accuracy Dependable with good attendance and punctuality Basic math and reading skills Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
N
Solderer
🏢 Nesco Resource
Salary not disclosed
Nesco Resource is looking for Solderers for our long-time client in Rochester Hills, MI.
This shift operates Monday through Friday from 7 AM until 3:30 PM.
Pay is based on experience, must have an updated resume.
The associate will perform all soldering, bonding, wiring, routing, assembly, disassembly, touch-up, rework, cleaning, and minor modifications, assemblies and sub-assemblies within the facility using electronic parts and components and a variety of hand tools.
The associate will work from approved visual aids, change notices (CN's), deviations and routes and/or any engineer-approved changes that apply to them.
Solderers will also move the completed product to the next production operation.
You will also use various measuring instruments and equipment to perform a visual and dimensional inspection of printed circuit boards, harnesses, sub-assemblies, and assemblies.
Inspects assemblies after machine soldering and complete required paperwork, logs, and records.
ESSENTIAL DUTIES AND RESPONSIBILITIES Perform manual and automated soldering of electronic components onto printed circuit boards Read and interpret technical drawings, schematics, and work instructions Set up and operate soldering equipment, including wave soldering machines and reflow ovens Inspect solder joints and completed assemblies for quality and conformance to specifications Clean and maintain soldering equipment and work area REQUIREMENTS Previous experience in electronic soldering, preferably in a manufacturing environment Ability to follow verbal and written instructions in English Proficiency in various soldering techniques, including through-hole and surface mount technology Ability to identify electronic components Ability to frequently lift/carry products weighing up to 50 lbs.
Ability to read and understand technical documents and schematics Strong attention to detail and commitment to quality Good hand-eye coordination and manual dexterity Good time management and organizational skills OTHER SKILLS AND ABILITIES Must complete soldering training course and pass soldering proficiency test Ability to maintain hourly run rates in a fast-paced environment Basic Math Electrostatic Discharge (ESD) training Electronic component identification training Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
This shift operates Monday through Friday from 7 AM until 3:30 PM.
Pay is based on experience, must have an updated resume.
The associate will perform all soldering, bonding, wiring, routing, assembly, disassembly, touch-up, rework, cleaning, and minor modifications, assemblies and sub-assemblies within the facility using electronic parts and components and a variety of hand tools.
The associate will work from approved visual aids, change notices (CN's), deviations and routes and/or any engineer-approved changes that apply to them.
Solderers will also move the completed product to the next production operation.
You will also use various measuring instruments and equipment to perform a visual and dimensional inspection of printed circuit boards, harnesses, sub-assemblies, and assemblies.
Inspects assemblies after machine soldering and complete required paperwork, logs, and records.
ESSENTIAL DUTIES AND RESPONSIBILITIES Perform manual and automated soldering of electronic components onto printed circuit boards Read and interpret technical drawings, schematics, and work instructions Set up and operate soldering equipment, including wave soldering machines and reflow ovens Inspect solder joints and completed assemblies for quality and conformance to specifications Clean and maintain soldering equipment and work area REQUIREMENTS Previous experience in electronic soldering, preferably in a manufacturing environment Ability to follow verbal and written instructions in English Proficiency in various soldering techniques, including through-hole and surface mount technology Ability to identify electronic components Ability to frequently lift/carry products weighing up to 50 lbs.
Ability to read and understand technical documents and schematics Strong attention to detail and commitment to quality Good hand-eye coordination and manual dexterity Good time management and organizational skills OTHER SKILLS AND ABILITIES Must complete soldering training course and pass soldering proficiency test Ability to maintain hourly run rates in a fast-paced environment Basic Math Electrostatic Discharge (ESD) training Electronic component identification training Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
N
SMT Technician
🏢 Nesco Resource
Salary not disclosed
Nesco Resource is seeking a highly motivated and detail-oriented SMT Technician to join the team of one of our long-term clients in the Rochester Hills area.
This shift is from 7 AM to 3:30 PM, Monday through Friday.
Under direct supervision, this individual will perform a broad range of tasks involving production support.
This includes equipment and process set-up, assisting in the direction of production departments, instructing and training of operators/assemblers, troubleshooting production problems, and conducting trial runs on new production jobs.
Additional responsibilities include the performance of maintenance requirements, managing of spare parts, and debugging of programs.
The ideal candidate will be hands-on, detail-oriented, and thorough, with good problem-solving skills and an ability to work well with others.
ESSENTIAL DUTIES AND RESPONSIBILITIES Other duties may be assigned.
Provide Technical support for Production in SMT, including interpreting assembly documentation and production standards.
Assist in training for operation and maintenance of SMT equipment as required, coordinate maintenance schedule based upon production schedule.
Program, set-up, troubleshoot, repair and operate the SMT equipment in the facility.
Works with production, engineering, and machine operators to maintain equipment and to ensure efficient operation of work centers to meet production schedules.
Monitor and ensure the necessary preventative maintenance activities are documented and being performed in a timely manner.
Work with Engineering to design processes and tooling utilizing knowledge of engineering principles.
Assist with the crating and uncrating of equipment, line moves and the movement and installation of machinery as required.
Assists in the ordering, inventory and sourcing of machine repair parts.
QUALIFICATION REQUIREMENTS Must have a thorough understanding of blueprints, drawings, schematics, equipment manuals, parts list, etc.
The ability to work with a high degree of independence.
The ability to communicate clearly and effectively (written & verbal).
The ability to work in a fast paced environment (multi-tasking skills).
Accuracy and thoroughness; Monitors own work to ensure quality.
Ability to demonstrate working knowledge of mechanical/electrical principles/concepts.
Good problem solving skills and an ability to work well with others.
EDUCATION and EXPERIENCE High School diploma or general education degree (GED): or one to three months related experience and training in a manufacturing environment.
Preferred candidate will have two (2) years of technical education and one (1) year of technical experience.
OTHER SKILLS AND ABILITIES Must be well organized individual, a good communicator, and work well with people on all levels.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
This shift is from 7 AM to 3:30 PM, Monday through Friday.
Under direct supervision, this individual will perform a broad range of tasks involving production support.
This includes equipment and process set-up, assisting in the direction of production departments, instructing and training of operators/assemblers, troubleshooting production problems, and conducting trial runs on new production jobs.
Additional responsibilities include the performance of maintenance requirements, managing of spare parts, and debugging of programs.
The ideal candidate will be hands-on, detail-oriented, and thorough, with good problem-solving skills and an ability to work well with others.
ESSENTIAL DUTIES AND RESPONSIBILITIES Other duties may be assigned.
Provide Technical support for Production in SMT, including interpreting assembly documentation and production standards.
Assist in training for operation and maintenance of SMT equipment as required, coordinate maintenance schedule based upon production schedule.
Program, set-up, troubleshoot, repair and operate the SMT equipment in the facility.
Works with production, engineering, and machine operators to maintain equipment and to ensure efficient operation of work centers to meet production schedules.
Monitor and ensure the necessary preventative maintenance activities are documented and being performed in a timely manner.
Work with Engineering to design processes and tooling utilizing knowledge of engineering principles.
Assist with the crating and uncrating of equipment, line moves and the movement and installation of machinery as required.
Assists in the ordering, inventory and sourcing of machine repair parts.
QUALIFICATION REQUIREMENTS Must have a thorough understanding of blueprints, drawings, schematics, equipment manuals, parts list, etc.
The ability to work with a high degree of independence.
The ability to communicate clearly and effectively (written & verbal).
The ability to work in a fast paced environment (multi-tasking skills).
Accuracy and thoroughness; Monitors own work to ensure quality.
Ability to demonstrate working knowledge of mechanical/electrical principles/concepts.
Good problem solving skills and an ability to work well with others.
EDUCATION and EXPERIENCE High School diploma or general education degree (GED): or one to three months related experience and training in a manufacturing environment.
Preferred candidate will have two (2) years of technical education and one (1) year of technical experience.
OTHER SKILLS AND ABILITIES Must be well organized individual, a good communicator, and work well with people on all levels.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
N
Assembly Technician (B Shift)
🏢 Nesco Resource
Salary not disclosed
Job Title: Assembly Technician (B-Shift) Location: Henrietta, NY Job Summary: NESCO Resource has partnered with a top-tier manufacturing company in Henrietta, NY to hire Assembly Technicians for a temp-to-perm opportunity.
This hands-on position focuses on assembling components with precision, ensuring accurate fitting, alignment, and finishing of interrelated parts.
If you're detail-oriented, mechanically inclined, and looking to grow in a fast-paced environment, this could be the perfect fit.
*New Employees WILL Be Required To Work Day Shift Hours For Approx.
2
- 3 Weeks
* Shift & Pay: B Shift: 2:00 PM
- 12:30 AM, Mon.
- Thurs.
$18.00
- $20.00 Per Hour (+10% Shift Differential; Based On Exp.) Key Responsibilities: Assemble components according to blueprints, diagrams, and work instructions.
Clean and prep parts thoroughly before assembly.
Operate lamination presses to construct units and subassemblies.
Tag all parts, subassemblies, and finished units accurately.
Perform quality checks to ensure product specifications are met.
Identify and correct assembly defects as needed.
Modify or fabricate parts using basic shop equipment when necessary.
Measure and verify tolerances using tools such as micrometers, calipers, and height gauges.
Communicate progress and any issues to your supervisor.
Qualifications: Education: High school diploma or GED required.
Experience: 1–2 years of mechanical assembly experience preferred.
Ability to read and follow detailed technical instructions.
Comfortable using computers for basic navigation and data entry.
Strong attention to detail and excellent troubleshooting skills.
Self-motivated and able to work both independently and within a team.
Physical Demands: Regularly lift and carry 20–30 lbs.
Perform repetitive tasks with precision and consistency.
Maintain good manual dexterity for efficient component assembly.
Must have full visual acuity including close vision, distance vision, color recognition, peripheral vision, depth perception, and the ability to adjust focus.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
This hands-on position focuses on assembling components with precision, ensuring accurate fitting, alignment, and finishing of interrelated parts.
If you're detail-oriented, mechanically inclined, and looking to grow in a fast-paced environment, this could be the perfect fit.
*New Employees WILL Be Required To Work Day Shift Hours For Approx.
2
- 3 Weeks
* Shift & Pay: B Shift: 2:00 PM
- 12:30 AM, Mon.
- Thurs.
$18.00
- $20.00 Per Hour (+10% Shift Differential; Based On Exp.) Key Responsibilities: Assemble components according to blueprints, diagrams, and work instructions.
Clean and prep parts thoroughly before assembly.
Operate lamination presses to construct units and subassemblies.
Tag all parts, subassemblies, and finished units accurately.
Perform quality checks to ensure product specifications are met.
Identify and correct assembly defects as needed.
Modify or fabricate parts using basic shop equipment when necessary.
Measure and verify tolerances using tools such as micrometers, calipers, and height gauges.
Communicate progress and any issues to your supervisor.
Qualifications: Education: High school diploma or GED required.
Experience: 1–2 years of mechanical assembly experience preferred.
Ability to read and follow detailed technical instructions.
Comfortable using computers for basic navigation and data entry.
Strong attention to detail and excellent troubleshooting skills.
Self-motivated and able to work both independently and within a team.
Physical Demands: Regularly lift and carry 20–30 lbs.
Perform repetitive tasks with precision and consistency.
Maintain good manual dexterity for efficient component assembly.
Must have full visual acuity including close vision, distance vision, color recognition, peripheral vision, depth perception, and the ability to adjust focus.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
N
Warehouse/Facilities Manager
🏢 Nesco Resource
Salary not disclosed
Warehouse and Facilities Manager Orion Twp., MI Contract to Hire $30
- $40 per hour Position Summary Seeking a hands-on Warehouse and Facilities Manager to oversee both: Warehouse Operations (Shipping & Receiving) Facilities Management (Multi-site oversight) This role works closely with the Operations Manager and partners regularly with: Sales leadership Purchasing leadership The ideal candidate is comfortable operating within an ERP system, managing people, driving performance, and maintaining strict plant safety standards.
Core Responsibilities Warehouse Operations Leadership Full responsibility for shipping and receiving operations Train and onboard new warehouse employees Plan, assign, and direct daily work activities Evaluate employee performance Reward, coach, and discipline team members as needed Address complaints and resolve operational issues Facilities Management Direct and coordinate facilities activities across multiple sites Ensure facilities operate safely, efficiently, and within budget Maintain plant-wide safety protocols and initiatives Business & Financial Oversight Support development of the annual business plan Set and manage departmental budgets Establish and monitor performance targets for direct reports Track and drive key safety goals and metrics Qualifications & Skills Education & Experience Bachelor's degree required 8+ years of related experience (or equivalent education + experience combination) Leadership & Technical Skills Strong strategic business planning ability Experience in employee development and organizational planning Knowledge of warehouse management best practices Budgeting and financial management experience Program planning, development, and implementation skills Demonstrated leadership capability Proficiency operating within an ERP system Communication & Culture Fit Strong written and verbal communication skills Ability to foster a cooperative, team-oriented environment Comfortable communicating across all levels of an organization PRO181 Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
- $40 per hour Position Summary Seeking a hands-on Warehouse and Facilities Manager to oversee both: Warehouse Operations (Shipping & Receiving) Facilities Management (Multi-site oversight) This role works closely with the Operations Manager and partners regularly with: Sales leadership Purchasing leadership The ideal candidate is comfortable operating within an ERP system, managing people, driving performance, and maintaining strict plant safety standards.
Core Responsibilities Warehouse Operations Leadership Full responsibility for shipping and receiving operations Train and onboard new warehouse employees Plan, assign, and direct daily work activities Evaluate employee performance Reward, coach, and discipline team members as needed Address complaints and resolve operational issues Facilities Management Direct and coordinate facilities activities across multiple sites Ensure facilities operate safely, efficiently, and within budget Maintain plant-wide safety protocols and initiatives Business & Financial Oversight Support development of the annual business plan Set and manage departmental budgets Establish and monitor performance targets for direct reports Track and drive key safety goals and metrics Qualifications & Skills Education & Experience Bachelor's degree required 8+ years of related experience (or equivalent education + experience combination) Leadership & Technical Skills Strong strategic business planning ability Experience in employee development and organizational planning Knowledge of warehouse management best practices Budgeting and financial management experience Program planning, development, and implementation skills Demonstrated leadership capability Proficiency operating within an ERP system Communication & Culture Fit Strong written and verbal communication skills Ability to foster a cooperative, team-oriented environment Comfortable communicating across all levels of an organization PRO181 Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
N
Quality Technician
🏢 Nesco Resource
Salary not disclosed
Job Title: Quality Control Technician Location: Gates, NY Summary: We are hiring a Quality Control Technician to support quality operations.
This position plays a key role in auditing, inspecting, and monitoring product quality throughout all stages of production.
The QC Technician ensures compliance with internal specifications, ISO 9001 standards, and customer requirements, while also contributing to process improvements and corrective actions.
If you have an eye for detail, strong communication skills, and a background in manufacturing quality systems, this is an excellent opportunity.
Shift: Monday – Friday; 8:00 AM
- 4:30 PM Pay: $23.00/Hour Core Duties & Responsibilities: Conduct quality audits throughout the production floor.
Perform inspections at all stages of manufacturing, including FAIs (First Article Inspections).
Identify areas for improvement and help implement new quality control methods.
Participate in equipment revision approvals and verify results.
Communicate quality and compliance issues with urgency to appropriate teams.
Develop, maintain, and evaluate inspection and test reports.
Review and maintain documentation such as COAs (Certificates of Analysis) and COCs (Certificates of Conformance).
Monitor equipment calibration and ensure all tools remain within specification.
Support data collection and evaluation for deviations from quality standards.
Work directly with production personnel to ensure training on quality procedures and expectations.
Lead and maintain Corrective and Preventive Action (CAPA) processes.
Ensure team members are following established 5-Phase Training Procedures.
Work with customers and suppliers to maintain quality expectations and professional relationships.
Perform other duties as assigned by the Quality Manager.
Qualifications: 2+ years of experience in a Quality Control or Technician role within a manufacturing environment.
Familiarity with ISO 9001 quality management systems.
ASQ Certification strongly preferred.
Strong understanding of Statistical Process Control (SPC).
Experience reading and interpreting technical drawings and blueprints.
Strong verbal and written communication skills.
Highly organized with the ability to manage documentation and inspection records.
Computer skills in Microsoft Excel, Word, and Outlook.
Ability to lift/move up to 40 lbs independently.
Able to sit or stand for extended periods, and bend or crouch as needed.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
This position plays a key role in auditing, inspecting, and monitoring product quality throughout all stages of production.
The QC Technician ensures compliance with internal specifications, ISO 9001 standards, and customer requirements, while also contributing to process improvements and corrective actions.
If you have an eye for detail, strong communication skills, and a background in manufacturing quality systems, this is an excellent opportunity.
Shift: Monday – Friday; 8:00 AM
- 4:30 PM Pay: $23.00/Hour Core Duties & Responsibilities: Conduct quality audits throughout the production floor.
Perform inspections at all stages of manufacturing, including FAIs (First Article Inspections).
Identify areas for improvement and help implement new quality control methods.
Participate in equipment revision approvals and verify results.
Communicate quality and compliance issues with urgency to appropriate teams.
Develop, maintain, and evaluate inspection and test reports.
Review and maintain documentation such as COAs (Certificates of Analysis) and COCs (Certificates of Conformance).
Monitor equipment calibration and ensure all tools remain within specification.
Support data collection and evaluation for deviations from quality standards.
Work directly with production personnel to ensure training on quality procedures and expectations.
Lead and maintain Corrective and Preventive Action (CAPA) processes.
Ensure team members are following established 5-Phase Training Procedures.
Work with customers and suppliers to maintain quality expectations and professional relationships.
Perform other duties as assigned by the Quality Manager.
Qualifications: 2+ years of experience in a Quality Control or Technician role within a manufacturing environment.
Familiarity with ISO 9001 quality management systems.
ASQ Certification strongly preferred.
Strong understanding of Statistical Process Control (SPC).
Experience reading and interpreting technical drawings and blueprints.
Strong verbal and written communication skills.
Highly organized with the ability to manage documentation and inspection records.
Computer skills in Microsoft Excel, Word, and Outlook.
Ability to lift/move up to 40 lbs independently.
Able to sit or stand for extended periods, and bend or crouch as needed.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
jobs by
✓ All jobs loaded