Jobs in Laguna Hills

Do you want to become a surrogate? We are now offering a sign on bonus to all qualified and matched surrogates that sign contracts. The first step is to fill out our surrogate application. A fertility specialist will contact you to continue the process. For intended parents interested in surrogacy to start or grow their families please contact us today. The surrogacy process is complex, but we will be with you every step of the way. Call today to get started.

Women who may have the ability to produce eggs but are unable to use their uterus or do not have a uterus, may consider a surrogate. A donated egg may also be used with the surrogate in the event a woman cannot produce her own eggs or her uterus is not intact or insufficient to carry a pregnancy. In either case, the husband's sperm, if viable, may be used.

Using an egg donor unrelated to the surrogate carrier eliminates any biological tie. The egg of the surrogate is never used as part of the assisted reproduction process, so that a surrogate is never in the position of delivering her own biological child.

The basic requirements of a woman to serve as a surrogate are:

• Emotionally stable
• Responsible
• In good physical health
• Non-smoker
• Has had at least one successful pregnancy
• Is capable of carrying a child to full term

A woman is not required to fall within a particular age range to serve as a surrogate, but most intended parents prefer a surrogate under the age of 40. For more information on surrogacy please see the documents on the left side of this page.

In Texas, there is a judicial process for validating the Gestational Contract (the contract between the intended parents and the surrogate). Included within the various requirements for having a Gestational Contract validated by a Texas court is that the intended parents must be married and the surrogate must have previously carried a child to term. Additionally, there are residency requirements that apply to either the surrogate or the intended parents, but not both.

Compensation for a surrogate services generally starts in the range of $35,000 - $40,000, for base compensation with over all fees up to 70k, in many cases. The amount of compensation is dependent upon a variety of factors, including, but not limited to, whether the surrogate carries twins, what procedures a surrogate is required to undergo and whether the delivery is vaginally or by cesarean section.

Strategic Account Director

Irvine, CA (on-site/hybrid/remote)

Role Overview

As Strategic Account Director, you will lead RIS Rx’s largest and most complex client programs, driving enterprise-level partnerships and ensuring operational excellence. This role is built for a dynamic, analytically driven leader who thrives in managing highly complex products, where success is defined by data integrity, operational precision, and cross-functional execution.

Core Responsibilities

Enterprise Account Ownership

• Act as the primary enterprise account owner for RIS Rx’s manufacturer programs.
• Own the overall client relationship, including executive-level communication, escalation management, and long-term account health.
• Ensure alignment between client objectives and RIS Rx’s operational, analytic, and product capabilities.

Cross-Functional Leadership

• Serve as the executive relationship lead across Client Success, Implementations, Product, Analytics, and Operations teams.
• Drive structured execution across all workstreams, ensuring clarity of ownership, timelines, and deliverables.
• Partner closely with internal leadership to align account strategy, resourcing, and performance expectations.

Program Oversight & Quality Control

• Provide oversight to ensure high client satisfaction and sustained program performance, including accurate claims, enrollment, and financial reporting.
• Maintain rigorous quality control standards while ensuring operational readiness and scalability for large manufacturer programs.
• Review and challenge data outputs prior to client delivery, ensuring accuracy, defensibility, and narrative clarity.

Ideal Backgrounds

Healthcare Consulting

• Experience advising pharmaceutical manufacturers, payers, or providers on commercial, access, or affordability programs.
• Comfortable operating in ambiguous environments and translating complex findings into clear recommendations.

Enterprise SaaS Account Management

• Ownership of large, complex client relationships where success depends on analytics, process design, and cross-functional coordination rather than pure sales tactics.

Financial Services

• Experience supporting banks, payments, or benefit-administration tools requiring precise Excel-based modeling, reconciliation, and large-file validation.

Across all backgrounds, candidates must demonstrate the ability to interpret messy, real-world datasets and convert them into actionable operational decisions.

Required Skills & Qualifications

• 7+ years of experience in account management, consulting, or enterprise client success within healthcare, SaaS, or financial services.
• Proven experience functioning as the key client sponsor for operationally complex, data-intensive products.
• Advanced Excel expertise, including:
• Dynamic formulas
• Pivot tables
• XLOOKUP and complex data reconciliation
• Large-file validation and financial modeling
• Exceptional ability to translate complex datasets into clear operational narratives for both internal teams and external stakeholders.

Leadership Attributes

• Consulting-style mindset: structured, and comfortable challenging assumptions and data prior to external sharing.
• Enterprise-level communicator who builds trust through analytic rigor and operational credibility.
• High-EQ leader capable of operating as a junior executive sponsor for RIS Rx’s most important client relationships.

Preferred Qualifications

• MBA or degree in economics, analytics, finance, or a related field.

OUR COMPANY:

DISPLAYIT Inc. stands as an acclaimed designer and manufacturer, specializing in the creation of structured experiential environments. Established in 1998 in Irvine, California, currently expanding operation in Texas. DISPLAYIT is dedicated to designing, constructing, and installing innovative structural branded solutions that convey a cohesive brand message for our valued customers.

At the heart of our success is a team of highly talented individuals who collaborate creatively at the highest level, aiming to deliver the finest custom experiences. Our commitment is underscored by our relentless pursuit of creative solutions to exceed customer expectations. We exist not only to meet but to surpass the needs of our customers, and our unwavering focus is on operational efficiency.

Join us in our journey at our state-of-the-art facilities located in the vibrant city of Irvine, where innovation and excellence converge.

SUMMARY:

The additional Technical Draftsperson will play a key role in our engineering department, collaborating closely with the design, fabrication, and project management teams to translate conceptual design into well-coordinated, technically accurate construction documents. This role requires a firm grasp of fabrication methods, architectural detailing, industry standards, and a proactive approach to problem-solving. The selected candidate will contribute to projects across the entire design-to-fabrication spectrum, ensuring precision, efficiency, and adherence to project timelines. Under the direction of the Project Manager and Director of Design/Technology, the 3D Technical Designer/Drafter produces shop drawings for multiple elements or entire projects. The ideal candidate must possess excellent technical design skills and some leadership skills to develop and implement solutions and communicate them to stakeholders effectively.

DUTIES AND RESPONSIBILITIES:

• Develop detailed shop drawing packages and architectural drawings, including plans, elevations, sections, and details, to provide clients, project managers, and fabrication leads with an accurate representation of the design intent, scope of work, materials, and fabrication/assembly methods.
• Collaborate with the design team to ensure seamless integration of aesthetic and functional aspects into technical drawings. Proactively identify potential design and fabrication issues and propose solutions.
• Meet deadlines and achieve high-quality, on-budget outcomes by establishing and maintaining effective communication among the project team, fabricators, clients, vendors, contractors, and consultants.
• Conduct thorough reviews of technical documents to ensure accuracy, completeness, and compliance with industry standards and regulations.
• Implement best practices and standards to accelerate project timelines while maintaining quality.
• Ensure the design complies with company standards, client requirements, and other specifications (ADA, Building Codes, etc.)
• Prepare facility impact documentation to share with the architect, client, and general contractors, detailing the necessary infrastructure to integrate and install the exhibit.
• Identify opportunities for process optimization and efficiency improvements within the design and engineering workflow. Utilize relevant software tools and platforms to enhance the efficiency and accuracy of fabrication drawings.

QUALIFICATIONS:

• Associate or Bachelor’s Degree in Engineering, Architecture Industrial Design, Interior Design, or other related Design/Engineering specialization preferred.
• Minimum of 5-10 years of post-college experience as a drafter/detailer for one or more of the following fields: Cabinetry/Millwork, Furniture, Retail, Hospitality, Commercial Architecture, Museum, Trade Show Exhibits, Theater, and Amusement Park projects.
• Proficiency in 2D/3D Design in Rhino or a willingness to learn it within a few months of starting.
• Exceptional proficiency in at least one of the following programs: Rhino, AutoCAD, Fusion, Inventor, SolidWorks, SketchUp, Vectorworks, ArchiCAD, and Revit.
• Strong knowledge of materials/finishes, fabrication tools, and techniques to develop highly detailed 3D models, fabrication drawings, and assembly instructions supporting the design/manufacturing process.
• Strong analytical and problem-solving skills
• General knowledge of building design and documentation
• Fabrication experience is a plus.
• Ability to effectively communicate verbally and in writing, as well as interpret verbal and written instructions.
• Ability to manage multiple projects and drawings simultaneously with attention to detail.
• Ability to prioritize and meet deadlines with limited supervision.
• Experience designing or programming for CNC and Laser Cutting Machines preferred.
• Working knowledge of Microsoft Office Suite, PDF editors, and other support software.
• Bilingual in Spanish/English is a plus.

COMPETENCIES

• Problem Solving--Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.
• Written Communication--Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information.
• Customer Service--Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments.
• Adaptability--Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.

PHYSICAL DEMANDS AND WORK ENVIRONMENT:

• Frequently required to stand
• Frequently required to walk
• Frequently required to sit
• Frequently required to utilize hand and finger dexterity
• Frequently required to talk or hear
• Occasionally required to lift/push/carry items that may exceed 35 pounds

Job Type: Full-time

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Schedule:

• Monday to Friday

Work setting:

• In-person
• Office

Department

Research & Development (R&D)

Summary

nRichDX is seeking an R&D team member whose primary responsibility will be quality control and functional testing of nucleic-acid extraction kits (cfDNA/cfRNA/cfTNA/CTC-related), supporting product releases and manufacturing scale. This role will also contribute to routine R&D workflows, including method verification, troubleshooting, documentation, and data generation for continuous improvement and external deliverables.

Key Responsibilities

Kit QC & Functional Testing (Primary)

• Own and execute functional testing plans for commercial kit lots (incoming components, in-process, and final kit performance testing).
• Run routine QC assays, including (as applicable):
• qPCR/RT-qPCR (recovery, inhibition checks, linearity)
• TapeStation/Bioanalyzer (size profiles, integrity, yield QC)
• Fluorometric quantification (Qubit/PicoGreen/RiboGreen)
• Extraction performance checks (yield, reproducibility, carryover, contamination controls)
• Prepare and process biological samples (plasma/urine/whole blood and contrived controls) according to SOPs.
• Track lot performance, generate QC summaries/CoA-support data, and flag out-of-spec trends.
• Investigate deviations and failures, perform root-cause analysis, and recommend corrective actions with R&D, Manufacturing, and Quality.

Cross-Functional Support

• Partner with Manufacturing to ensure smooth tech transfer and readiness for scale (materials, build records, test readiness).
• Coordinate with Quality on documentation, change control support, and release criteria.
• Support troubleshooting of customer-reported issues by recreating conditions and documenting findings.

Routine R&D Work (Secondary)

• Assist with protocol optimization, method verification, and robustness studies.
• Support automation workflows as needed (e.g., Hamilton or internal platforms), including run setup, execution, and data review.
• Maintain lab organization, instrument upkeep, reagent preparation, and inventory management.
• Maintain high-quality documentation: lab notebooks, raw data files, SOP updates, and summary reports.

Qualifications

Required

• B.S. in Molecular Biology, Biochemistry, Chemistry, Biomedical Engineering, or related field (M.S. preferred).
• 2+ years hands-on experience in a molecular biology lab (industry preferred).
• Demonstrated experience with DNA/RNA extraction and qPCR/RT-qPCR.
• Strong attention to detail and comfort working in a structured, repeatable testing environment.
• Ability to produce clear documentation and communicate results to cross-functional teams.

Preferred

• Experience with cfDNA/cfRNA/cfTNA workflows, low-input samples, or liquid biopsy.
• Experience with TapeStation/Bioanalyzer, NGS library QC, or inhibition/contamination control strategies.
• Familiarity with GxP/ISO concepts, change control, deviations, and data integrity principles.
• Experience supporting automation platforms (Hamilton, etc.).
• Comfortable analyzing data in Excel; bonus for basic stats/graphing or scripting.

Skills & Attributes

• Highly organized, reliable, and execution-focused.
• Strong troubleshooting mindset and ability to identify patterns/trends across lots.
• Collaborative and comfortable working with R&D, Manufacturing, and Quality.
• Able to manage multiple tests/priorities while maintaining accuracy.

Working Conditions

• Lab-based role handling human-derived specimens (with appropriate training and PPE).
• May require occasional schedule flexibility to support builds, releases, or time-sensitive studies.

Success Metrics (First 3–6 Months)

• Independently executes the functional testing plan for kit lots with minimal supervision.
• Produces consistent, audit-ready QC documentation and summaries.
• Helps reduce retests/failures via early detection of issues and clear root-cause investigations.
• Contributes meaningfully to routine R&D studies and continuous improvement efforts.

M3 Wake Research, an M3USA Company, is an integrated network of premier investigational sites meeting the clinical research needs of global biopharmaceutical, biotechnology, medical device, pharmaceutical and clinical research organizations (CROs). With close to 30 owned and managed research sites across the country, M3 Wake Research is one of the largest independent, multi-site clinical research companies in the US. M3 Wake Research continues to grow through acquisitions and uncompromising commitment to careful planning and execution in accordance with regulatory compliance.

Conducting studies since 1984, M3 Wake Research owns a proprietary patient database of potential clinical trial participants across the US. As of today, our board-certified physicians have completed more than 7,000+ successful clinical trials, while consistently exceeding sponsor expectations for integrity, timeliness, subject enrollment, human protection, and expeditious delivery of accurate evaluable data.

Due to our continued growth, we are hiring for a Clinical Research Coordinator at Wake Research, an M3 company. This position is on-site and located in Irvine, CA.

The Clinical Research Coordinator (CRC) is a specialized research professional working with and under the guidance of the clinical research site management and Principal Investigator (PI). While the PI is primarily responsible for the overall conduct of the clinical trial, the CRC manages, supports, facilitates and coordinates the daily clinical trial activities and plays a critical role in the conduct of the study.

Essential Duties and Responsibilities:

• Assisting trial Investigator in screening and review of potential study participants eligibility
• Maintaining case report forms, charts and documentation
• Mentoring, training, and high-level oversight of other clinical research coordinators and research assistants
• Ensuring that all clinical activities are carried out in accordance with established research protocol and standards in compliance with all applicable laws, regulations, policies, and procedural requirements
• Collecting and entering data as necessary
• Assist management with potential new hire selection and shadowing process
• Assist with study start-up, maintenance, and close-out of studies as needed for those on the team
• Ability to be flexible with study assignments
  
  

• Clinical Research Coordinator with 2+ years of experience
• Phlebotomy & EKG experience strongly preferred
• Excellent verbal & written communication skills
• Ability to learn quickly, read and understand complex protocols, follow very detailed directions, and multi-tasking
• Must be able to maintain strict confidentiality of patients, employees, and company information at all times and adhere to HIPAA Guidelines
• Extensive clinical trial knowledge through education and/or experience
• Successful completion of GCP Certification and Advanced CRC preferred
• Detail-oriented
• Familiarity with the Code of Federal Regulations as they pertain to human subject protection
• Strong interpersonal skills
  
  

About M3:

M3 USA is at the forefront of healthcare innovation, offering digital solutions across healthcare, life sciences, pharmaceuticals, and more. Since our inception in 2000, we’ve seen remarkable growth, fueled by our mission to utilize the internet for a healthier world and more efficient healthcare systems.

Our success is anchored in our trusted digital platforms that engage physician communities globally, facilitating impactful medical education, precise job placement, and insightful market research. M3 USA prides itself on a dynamic and innovative work environment where every team member contributes to global health advancements.

Joining M3 USA means being part of a dedicated team striving to make a significant difference in healthcare. We provide a unique opportunity for you to be at the cutting edge of healthcare innovation, shaping the future in a meaningful career. Embrace the chance to drive change with M3 USA.

Benefits:

A career opportunity with M3 Wake Research offers competitive wages, and benefits such as:

• 401(k), 401(k) matching
• Dental insurance
• Disability insurance
• Employee assistance program
• Flexible spending account
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

*This position offers a competitive pay rate of $30–$40 per hour.

*M3 reserves the right to change this job description to meet the business needs of the organization

The Planet Group is seeking a CRM Campaign Operations Project Manager to join one of our well-known global pharmaceutical clients.

The CRM Campaign Operations Project Manager is responsible for a key franchise group (e.g., Oncology) and leads consumer brand team marketing initiatives, supporting cross-functional team members and agency partners to align and execute on email, SMS, and direct mail campaigns. This role will focus on tactical execution of the campaign roadmap through its entire lifecycle to increase performance and efficiency.

• Pay: $40-$43/hr depending on experience
• Duration: 12 mo to start (potential to extend / convert)
• Location: Hybrid (Tuesday–Thursday on-site), open to the following locations: Mettawa, IL, Irvine, CA, or Florham Park, NJ

CRM Campaign Operations Project Manager Responsibilities:

• Responsible for day-to-day management and oversight of medium-high complex brand CRM engagements including developing project plans, creating status reports, conducting weekly status meetings, following up / communicating with all stakeholders to ensure on-time, flawless execution of brand CRM programs.
• Learn the business for the respective therapeutic areas/brands.
• Effectively work with multiple departments and agencies throughout project development and implementation to keep projects on time and ensure all requirements are met.
• Proactively manage workload and continuously look for ways to improve brand campaigns to meet brands' objectives and goals by reviewing campaign performance, identifying optimization opportunities, and communicating them to the marketing team.
• Develop and maintain project documents, timelines, proofing checklists and status reports. Possess minute-by-minute knowledge of all work in progress, identify risks and ways to mitigate issues.
• Partner with cross functional / agency teams to create processes to capture requirements, gain approvals, document metadata, and verify data elements needed to execute campaigns.
• Document change requests, notify the team, and understand timeline implications. Seek standardization, automation, and process improvement wherever possible to deliver on vision for the team of faster, better, cheaper year over year.
• Prepare quarterly campaign audits and campaign performance SLAs and review with CRM leadership.
• Identify any issues or concerns, the team has with cross functional and agency partners. Identify issues, identify root cause, and recommend corrective action where necessary.
• Monitors campaign performance and proactively provide recommendations to drive an increase in engagement.
• Participate in the planning process with brands, internal cross functional teams, and their respective agency partners. Maintain check-ins with each team to track actual campaign activity and manage resources accordingly.
• Prepares well-organized, clear, and concise communications and sets clear expectations. Creates quarterly business reviews with brand and omnichannel leaders.

Leadership Competencies:

• Positive “all for one” approach to team deliverables and priorities.
• Builds strong relationships to enable higher performance.
• Learns, fast, grasps the “essence” and can change course quickly where indicated.
• Raises the bar and is never satisfied with the status quo.
• Creates a learning environment and open to suggestions.
• Embraces the ideas of others, nurtures innovation and manages innovation to reality.

CRM Campaign Operations Project Manager Qualifications:

• 3-5 years of experience of Database Marketing, CRM, Email, Digital, Direct Mail, 1:1 marketing experience.
• Minimum of 3 years of hands-on work experience in client service, account or response management discipline.
• Digital marketing or interactive agency experience is a plus.
• Ability to lead multiple projects simultaneously in a fast-paced, dynamic environment.
• Excellent written, verbal, and interpersonal communication skills to effectively work with team members.
• Analytical ability to identify optimization opportunities and program related issues.
• Enthusiastic, solution-oriented attitude in accepting work/new challenges.
• Excellent knowledge of Microsoft Office Software: Word, Excel, PowerPoint, and Outlook.
• Knowledge of current marketing automation and email delivery technologies, and familiarity with how the digital ecosystem is evolving.
• In-depth knowledge and experience with Salesforce Marketing Cloud or equivalent enterprise marketing automation platforms such as Adobe Marketo, Adobe Campaign, or Unica.
• Experience implementing CRM best practices.
• Proven track record of launching successful email campaigns and/or consumer programs.
• Bachelor’s degree in business or marketing or equivalent experience.

This is an in-office position within a professional workplace, and remote work is not an option.

A portfolio is required for consideration; applications without a portfolio will not be reviewed.

We are seeking a Motion Graphics Designer/Video Editor to join our team in Irvine, CA. This role focuses on producing high-quality video content for corporate 1031 Crowdfunding business accounts, The Ed Fernandez Show podcast, and other brands within our umbrella of companies. The ideal candidate is a creative storyteller with technical proficiency, capable of working in a fast-paced environment to produce engaging content optimized for performance across various platforms.

Video Responsibilities

• Edit and enhance video clips for various social media platforms, ensuring high-quality visuals, audio, and overall production value.
• Create and integrate animations, motion graphics, and visual effects to elevate video content and storytelling.
• Create and curate social media content (including graphics and videos) across multiple platforms
• Create engaging and compelling short-form video content from longer videos, interviews, events, or other sources, tailored to each social media platform's best practices.
• Work with the Director of Marketing to create social advertisements.



Graphic Design

• Develop and design creative visual materials such as brochures, flyers, social media graphics, infographics, banner ads, email marketing graphics and other marketing collateral
• Web and App UX/UI design
• Collaborate with the marketing team to ensure all design materials align with brand guidelines and effectively communicate the company's messaging

Qualifications

• Bachelor's degree in marketing, communications, or related field or equivalent work experience
• Adobe Premiere or DaVinci Resolve experience preferred (or comparable software)
• Proficiency in Adobe Creative Suite, including Adobe Illustrator, After Effects, Premiere preferred
• Excellent written and verbal communication skills
• Creative mindset with the ability to develop engaging content
• Ability to work in a fast-paced environment and manage multiple projects simultaneously

Pay Scale and Compensation Benefits:

The Motion Graphics Designer position will be full-time, with a competitive salary range of $70k - $75k annually based on experience and qualifications. In addition to salary, we offer a comprehensive benefits package that includes health, dental, and vision insurance, paid time off, and paid holidays.

We look forward to hearing from qualified candidates who are passionate about social media marketing and excited to join our dynamic team!

Job Type: Full-time

Salary: $70,000 - $75,000 per year

Benefits:

• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Retirement plan
• Vision insurance

Schedule:

• Monday to Friday

Ability to commute:

• Irvine, CA 92614: Reliably commute (Required)

Experience:

• Marketing: 2 year (Preferred)

Work Location: In person

About 1031 Crowdfunding

Founded in 2014, 1031 Crowdfunding is a leading real estate investment and asset management firm. We offer a full suite of real estate investment opportunities—including DSTs, real estate funds, Opportunity Zone Funds, and more—designed to meet the diverse needs of today’s investors. Our proprietary online platform makes it easy for investors to explore, evaluate, and invest in institutional-quality real estate opportunities—all in one place. With a commitment to innovation, client success, and long-term value creation, we’re redefining how investors access and experience real estate investing.

How You'll Make An Impact:

1. Analyze key data sets—including global inventory, demand and supply signals, intercompany transfer orders, and open orders—to identify root causes of order fulfillment delays.
2. Partner with cross?functional teams such as Supply Planning, Manufacturing, Logistics, and Customer Service to resolve issues contributing to past?due orders.
3. Build and maintain reporting that highlights trends in past?due orders, and collaborate with stakeholders to define and implement preventive actions.
4. Contribute to initiatives aimed at reducing Global Open Orders Past Due to below $16.6M and improving OTIF performance from 88% to 92% by 2026.

What You Bring:

1. Bachelors degree in Supply Chain, business management, accounting, mathematics, project management
2. 3-5 years in Supply Chain roles, customer service roles or equivalent
3. Experience reviewing and analyzing large data sets in Excel, PowerBI, or equivilent
4. Experience in SAP or Kinaxis a plus

Contract duration: 6 months (hybrid)

Pay: $36/hour

JOB RESPONSIBILITIES:

- Will be assisting HR with various duties including but not limited to filing and purging employee records.

- Performs a variety of routine administrative and clerical functions.

- Completes daily assignments under general supervision in support of one or more administrative teams.

What Makes This Role Exceptional

This is far more than standard executive support—it’s strategic partnership at the highest level. As the Executive Assistant to the CEO of an ultra-exclusive family office in Irvine, CA, you are entrusted to understand the CEO’s vision, anticipate operational needs, and be the force multiplier ensuring seamless execution—both strategically and tactically.

Key Responsibilities

• Strategic & Tactical Execution: Lead high-impact initiatives while managing detail-rich tasks, ensuring every action aligns with the CEO’s overarching goals.
• Proactive Anticipation: Identify and resolve potential issues before they arise, ensuring smooth operations and allowing the CEO to focus on only what they can do.
• Dynamic Coordination & Filtering: Manage a complex calendar and communications flow with discretion, clarity, and precision.
• Executive Travel Orchestration: Oversee every tier of travel logistics—from ultra-premium arrangements (private jets, real-time itinerary updates, private staff coordination) to streamlined business-class travel and monthly recurrence trips.
• Event & Off-Site Leadership: Plan and coordinate high-level events, retreats, or personal gatherings—either solo or in partnership with event teams.
• Project Overflow Management: Take ownership of the CEO’s overflow tasks—delivering both routine and strategic outcomes.
• Personal & Household Logistics: Seamlessly shift between executive-level responsibilities and personal support—whether that’s preparing a briefing, arranging a meal, or booking a flight.
• Operational Agility: Adapt effortlessly—executing both polished presentations and granular operational details as needs shift.

Core Skills & Proficiencies

Hard Skills

• Advanced user of PowerPoint, Word, Outlook—comfortable supporting high-stakes presentations and communications
• Highly proficient in Excel for reports and data management, without needing complex macros
• Skilled with Zoom, Microsoft Teams, WebEx—confidently managing executive communications, town halls, and board sessions
• Tech fluent on both Mac and PC, with practical troubleshooting abilities
• Experienced with expense systems like Concur (or equivalents)
• Familiar with collaboration platforms: SharePoint, OneDrive, etc.
• Comfortable navigating CRM tools (e.g., Salesforce) or systems as needed
• Quick to master new technologies and internal systems
• Prior exposure to supporting Board of Directors is highly valuable

Soft Skills

• Exceptional emotional intelligence—empathy, self-awareness, and interpersonal finesse—critical for executive dynamics
• Meticulous attention to detail—anticipating errors before they surface
• Masterful communication—you adapt your tone and format across mediums (text, email, phone, in-person) to influence without authority
• Strategic problem-solving—steady, creative, and proactive in navigating complex challenges
• Agile and resilient under pressure—fluidly pivoting as priorities shift
• Effective research and networking—you know who to ask or where to look to get things done
• Deep professional discretion—trusted with sensitive and confidential matters
• "Always on" mindset—resourceful, solution-obsessed, driven to deliver with creativity and grace
• Relationship builder with a strong internal and external network—knowing how to connect and grow influence from day one

Ideal Candidate Profile

• Bachelor’s degree or higher
• Minimum of 8 years supporting a C-Suite executive—CEO or President preferred—in high-trust, dynamic environments
• A Career Executive Assistant—this is your calling, not a launchpad for something else

Why Elite Candidates Will Be Drawn to This Role

• A rare, high-trust, and high-impact position supporting a CEO in a private, exclusive setting
• Exceptional compensation that aligns with the breadth and depth of strategic and operational expectations
• A uniquely varied role spanning vision alignment, executive coherency, and personal support—offering deep professional reward and influence