Engineering Jobs in Laceys Spring Morgan County Al Remote
63 positions found
S. government issued security clearance is required. S. citizens are eligible for a security clearance Security Clearance Type:
Secret Security Clearance Status:
Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. System Safety / Human System Integration (HSI) Department ensures our products Safety and Human Factors disciplines are incorporated into all our engineering and program execution to provide for our customers critical needs. This is an exciting opportunity for a highly motivated Senior System Safety Engineer to join our team in Huntsville, AL.
Lead one or more MIL-STD-882E compliant system safety programs
Perform MIL-STD-882E System Safety Program tasks and analyses, or customer's approved equivalent
Coordinate with customer safety representatives to gain safety approval from appropriate Safety Review Board authorities
Perform System Safety Program, Hazard analyses or Design analyses
Brief safety of the program at technical reviews and as part of the safety approval process
Interpret system requirements, customer specifications and military standards
Prepare internal and customer reports describing various analyses relevant to the System Safety program
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience.
Experience with System Safety Engineering, Systems Engineering, Software or Firmware Engineering, Electrical Engineering or equivalent Safety Engineering.
S. government issued Secret security clearance is required. S. citizens are eligible for a security clearance.
Experience in weapon combat systems, specifically missile system safety experience
Experience with DoD System Safety Programs
A Master's degree in Science, Technology, Engineering or Mathematics (STEM).
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. This position requires the ability to obtain a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
Relocation Eligible
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-03-13Country:
United States of AmericaLocation:
US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATHPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
We are seeking a professional Power Design Electrical Engineer to assume a key role within the System Power, Analog and Controls Department.
Do you enjoy power converter design?
Do early-career engineers come to you for technical guidance?
Do you have a strong desire to work on projects that are critical to the defense of our nation?
If your answers are yes, we are looking for you to join our team!
What You Will Do
Design, analyze (including thermal considerations), simulate, and test power conversion circuitry potentially utilizing any standard non-isolated power conversion topologies (buck, boost, buck-boost) including modules and discrete designs.
Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation.
Perform design work within the bounds of a given schedule.
Present reviews of technical data to program leadership and technical staff.
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior
relevant experience
Minimum of 2 years of professional experience in design, analysis, simulation, and/or test experience with linear converters.
Experience with any of the following non-isolated converter topologies: buck, boost, buck-boost.
Experience with design, analysis, and test with analog electronic design and analysis, including FET, BJT, and/or Op-amp circuits.
Qualifications We Prefer
Lab experience specific to power electronics and/or controls electronics
Demonstrated use of software tools for electrical circuit simulation and/or printed circuit board layout
Demonstrated ability to document designs and circuit performance verification
Understanding of fundamental power conversion concepts, components, and techniques
Demonstrated understanding of linear controls and motor drive techniques.
Basic understanding of commonly used power converter and/or motor drive control schemes
Design, analysis, and/or test experience with any of the following isolated converter topologies: flyback, half-bridge, full-bridge, and/or push-pull. Design scope will ideally include stability.
Experience with performing circuit card assembly-level power architecture trades, and/or with system-level power architecture trades, including power converter specification development experience.
Professional experience guiding Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation (direct experience with such tools is adequate to fulfill this requirement).
Familiarity with circuit simulator SIMPLIS, Saber and/or analysis tool Mathcad.
Experience with Mentor Graphics DxDesigner, and/or Hyperlynx.
Experience with acting as a liaison between program and functional management.
Experience with digital power control.
Experience with military specifications.
Experience with transformer and inductor design considerations.
Design experience with Electro-Magnetic Interference (EMI) concerns.
Design experience with voltages > 400V and/or power > 10kW.
Experience with program management tools such as Earned Value.
Experience with proposal development.
Ability to design to meet concerns of adjacent disciplines, such as thermal, structural, mechanical, reliability, and quality.
Ability to be a self-starter and be able to function in a dynamic environment.
Strong interpersonal, leadership, communication, and time management skills.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
This positions is onsite in Huntsville, AL and is eligible for relocation assistance.
Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?
Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems in air and space that impact people’s lives around the world today, and for generations to come. Our work preserves freedom, democracy, and advances human discovery and our understanding of the universe. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future and have a lot of fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they’re making history.
Northrop Grumman has an opening for a Principal or Senior Principal DevOps Engineer to join our team of qualified, diverse individuals. This position can be located in Roy, UT, Bellevue, NE, or Huntsville, AL.
As an DevOps Engineer, you will
Develop scripts, workflows, and playbooks for storage provisioning, automation, and backup integration.
Design, build, maintain and own SDP‑compliant CI/CD pipelines, ensuring they incorporate security checks, automated patching, and governance requirements.
Develop containers with Podman and orchestrate deployments on Kubernetes (or similar platforms).
Create and maintain IaC using Ansible (or comparable tools) to provision and configure cloud resources, containers, and networking components.
Write automation scripts and playbooks in Python, Go, Bash, or other languages for building images, running SAST scans, and automating repetitive tasks.
Develop and evolve build, deployment, and release processes, including versioning, artifact storage, and promotion across environments.
Basic Qualifications
Must have an active U.S. Government DoD Secret security clearance at time of application, current and within scope, with an ability to obtain and maintain Special Access Program (SAP) approval as determined by the company to meet its business need
Hold or have the ability to obtain Security + CE (or other DoD 8570/8140 certification)
Level 3 (T3): 5 Years with Bachelors in Science from an accredited university; 3 Years with Masters; 1 Year with PhD or
4 additional years of relevant experience in lieu of a degree.
Level 4 (T4): 8 Years with Bachelors in Science from an accredited university; 6 Years with Masters; 4 Years with PhD or
4 additional years of relevant experience in lieu of a degree.
Experience with developing CI/CD workflows and utilizing tools such as Nexus, Maven, Jira, GitLab, and Release Management
Hands-on experience with Infrastructure as Code tools (e.g., Puppet, Chef, Ansible.)
Programming and scripting experience in a UNIX environment (GoLang, C++, Perl, Python, Bash, Ruby, Shell, Scripts)
Preferred Qualifications
Experience with Kubernetes, Docker, and/or other cloud orchestration tools and technologies
Experience with Podman, Buildah, Skopeo and/or other container tools and technologies
Experience with CI/CD best practices, automated builds and tests, quality gates, software quality, and CI tools, i.e., Jenkins
Experience with configuration management tools, i.e., Git, GitHub,
GitLab, Bitbucket, others Familiarity with branching strategies, gated commits, source-controlled management, etc. Familiarity with the principle of DevSecOps
Familiarity with Atlassian Tool Suite Jira, Confluence Familiarity with using a Nexus Repository
Familiarity with security coding standard best practices, static and dynamic scanning tools, i.e., SonarQube, Fortify, Coverity, PCLint, Anchore, Nexus Lifecycle, etc.
Familiarity with Agile Development
Date Posted:
2026-03-11Country:
United States of AmericaLocation:
US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATHPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1Are you ready to explore the world of aerospace and defense? Do you want to learn from and collaborate with some of the greatest minds in the industry? At RTX, our internships, co-ops and full-time careers provide an exceptional foundation to work on complex problems, advance your skills and create a safer, more connected world. Discover opportunities to make a difference at RTX.
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Mechanical Engineering (ME) organization leads in mechanical hardware design, development, as well as production using state-of the-art tools, processes, technology, and Six Sigma principles. ME’s capabilities encompass a broad range of technical disciplines which include engineering, manufacturing, technical services, materials, processes, analysis, test, and documentation.
The Shipboard Effectors Department is currently searching for an experienced Mechanical Design Engineer II to work on a multi-discipline team to support the production of Shipboard Effectors products and subsystems located in Huntsville, AL.
This is an onsite role with regular support required in a production missile integration facility.
This position requires strong communication skills to collaborate across Engineering, Operations, Supply Chain, and Quality. Experience with hardware integration and test, supplier first article inspections, production work instructions and failure investigation principals are strongly desired.
Candidate will work closely with Integrated Product Team Leads/Program Managers to ensure that engineering requirements are defined, risks are managed, and schedules/budgets are met. Candidate will ensure Technical Data Packages are maintained and updated as necessary. Decisions must be data driven in nature and require preparing technical justification analysis reports as well as presenting to a variety of Engineering Review Boards.
What You Will Do
- Contribute to finding solutions to a wide range of technical problems related to the design, manufacture, integration, and production sustainment of various mechanical subsystems, including support in the engineering lab and the factory floor both at Raytheon and at suppliers
- Support first article inspections, work instruction reviews, material dispositions, and root cause investigations for production issues. Decisions are data driven and require preparing technical justification analysis reports and presenting to a variety of Engineering Review Boards
- Perform mechanical design, development, and documentation of components, subassemblies, and end items for defense system equipment in accordance with system requirements
- Interface with other engineering disciplines, non-technical disciplines, and suppliers to develop design solutions and resolve technical issues
- Regular onsite support at Missile Integration Facility
- Periodic travel to suppliers or other program sites will be required (10-15%)
Qualifications You Must Have
- Master of Science Degree in Mechanical Engineering, Aerospace Engineering, or similar Engineering discipline
- This position requires 12 months or less of relevant professional work experience (excluding internships)
- Experience with 3D CAD tools (modeling and drawing)
- Experience with interpreting assembly and/or component drawings
Qualifications We Prefer
- Experience with Geometric Dimensioning & Tolerancing (GD&T) per ANSI Y14.5
- Proficient in Creo (modeling and drawing) and Windchill (PDM)
- Mechanical aptitude to provide solutions to a variety of technical problems of
moderate scope and complexity.
- Strong interpersonal and communication skills; both verbal and written
- Ability to work in teams or independently, flexible, demonstrates initiative.
What We Offer
- Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
- Relocation Eligibility
Learn More & Apply Now!
- Please consider the following role type definition as you apply for this role.
- Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
- Please upload a copy of your most recent transcripts with your resume when applying to this requisition. Include your cumulative GPA and projected graduation date on your resume.
- This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-02-23Country:
United States of AmericaLocation:
US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATHPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
As a Principal System Safety Engineer, you will be accountable for the establishment and execution of the major safety programs. The Safety Lead is a technical expert in missile safety as well as a project manager who establishes and monitors safety program execution, leads program safety teams, and interfaces with program & functional leadership. This requires advanced application of MIL-STD 882E for System Safety (hardware, software, firmware, and personnel) for DoD Missile systems, typically obtained through advanced education combined with experience as well as project management experience and leadership. Location: Huntsville, AL
What You Will Do
This is an exciting opportunity for a highly motivated Principal System Safety Engineer to join us onsite in Huntsville, AL, as a Safety Lead with proven experience in executing all aspects of system safety.
Practical application of project management skills:
Create/update the strategy for the program to meet all its milestones with system safety features integrated into the product in compliance with contract and awarded funding.
Create a schedule and integrate safety tasks and activities into program Integrated Master Schedule (IMS).
Plan/manage the safety program effort within the Program IMS.
Understanding of the safety budget and tasking through close coordination with the responsible CAM / IPTL / product owner, including EACs.
Mentor junior safety engineers.
Remove barriers impacting team members.
Actively engage in engineering review boards, and configuration control boards to stay on top of design changes, and assess impacts to the established safety program.
Establish on-going feedback loop with functional and program management.
Lead & coordinate System Safety Working Group(s) between key Raytheon and Customer representatives.
Escalate risks to the appropriate level and follow through on corrective actions.
Interpret system requirements, customer specifications and military standards, so as to recommend compliance strategies to program leadership: Chief Engineer, Program Manager, Integrated Product Team Lead, etc.
Collaborate with stakeholders across a range of engineering functions to identify and mitigate risks: Systems Engineering, Software Engineering, Firmware Engineering, Electrical Engineering, Hardware Engineering, Environmental Safety, & Health, Human Systems Interfaces, Test Engineering.
Manage safety related interactions with suppliers and/or subcontractors.
Innovate better safety solutions.
Identify best practices to improve overall safety culture at Raytheon.
Understand and shape system safety/Human System Interfaces postures across the lifecycle (design, integration/ test, flight test, production, field, returns).
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience.
Experience developing and implementing MIL-STD-882E System Safety Program tasks and analyses, involving management (task series 100), analysis (task series 200), evaluation (task series 300), and verification (task series 400). This includes hardware and software safety related tasks.
Experience with presentation skills to brief safety status to safety approval authority at technical reviews, safety review boards, and others as part of the safety approval process.
Experience managing a safety program.
Experience collaborating with stakeholders across a range of engineering functions to identify and mitigate risks.
The ability to obtain and maintain a Secret U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for the required security clearance.
Qualifications We Prefer
An active and transferable Secret U.S. government issued security clearance.
Experience with briefing at the military safety review board.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
This position requires the ability to obtain a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
Relocation Eligible
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-03-11Country:
United States of AmericaLocation:
US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATHPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.
Effector Guidance Electronics is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters. This includes design and test activities that span preliminary design to integration. Products we develop support radar and datalink applications on a variety of tactical missile programs. Critical to this role is designing for challenging mechanical constraints and extreme environments.
What You Will Do
Design and development of transmitters, receivers or exciters
Design of circuit card assemblies (CCAs) with RF or mixed signals
Work in a lab to accomplish component characterization as well as module verification and integration
Test and handle sensitive RF Hardware
Schematic capture and RF routing
Partner with interdisciplinary teams - power, digital, mechanical, etc.
Qualifications You Must Have
Typically requires a Bachelors Degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience
Minimum of two years of prior relevant experience to include any combination of the following:
RF design and fabrication
RF test and troubleshoot
Simulation of RF products
Experience with any of the following tools: Mentor DX Designer or equivalent, High Frequency Structure Simulator (HFSS) or equivalent, SystemVue/Genesys or equivalent, Advanced Design System (ADS)
Qualifications We Prefer
- Technical background in some of the following areas:
Cascade analysis and/or frequency planning
Filter design and fabrication
Circuit card assembly design and fabrication
Testing or designing RF hybrid (chip and wire) technologies
High speed data converter test/characterization
High power RF design or test experience
Scripting experience (MATLAB or Python)
- Working across domains on complex projects
- Ability to prepare documentation with minimal oversight
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
This position is 100% onsite in Hunstville, AL and is eligible for relocation assistance.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-03-10Country:
United States of AmericaLocation:
US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATHPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start dateAt Raytheon, the foundation of everything we do is rooted in our values and a higher calling to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safe, more secure world.
Raytheon is seeking a Principal Electrical Engineer to join the Effector Subsystems Products (ESP) Department in Huntsville, AL. The selected candidate will perform and/or assist in the performance of Parts Engineering, Components Engineering or Applications engineering tasks supporting programs in the proposal, System Design Description, Low Rate Initial Production (SDD, LRIP), production and support phases.
What You Will Do
Day to day interface with designers, product development engineering, Electronic Computer Aided Design (ECAD) function, program management, and other disciplines.
Determine program statement of work (SOW) and other defined customer component application requirements.
Determine program component environmental / characteristic application requirements.
Provide technology insertion and parts selection/standardization guidance while adhering to business, component parametric, application environmental and circuit application constraints.
Interface with multiple internal stakeholders and external suppliers/manufacturers to develop component risk and verification delineation.
Create component verification data packages with supporting data.
Provide applications engineering support to multiple program integrated product teams (IPT's.)
Facilitate component selection and libraries application through the coordination and generation of the program bill of material (BOM) in a collaboration toolset.
Presentation of component standardization, design library, obsolescence management and termination finish risk results in support of program preliminary and critical design reviews (PDR’s / CDR’s.)
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior
relevant experience
Minimum of 8 years experience in the following categories:
Experience with component obsolescence management methodologies
Experience with Parts Standardization application and technology insertion within the design process
Experience with the development of associated component data / drawings and the judgment /determination of part applications to meet program/project objectives and requirements.
Experience with BOM (Bill of Material) development and management for developmental and production programs
Qualifications We Prefer
Understanding of the application of technical theories and concepts as they apply to electronic components and the parts management field
Demonstrated knowledge of component failure modes, component reliability and military specifications and standards
Ability to read and interpret engineering drawings and hierarchy definition.
Active electronic circuit design experience.
Mentor Graphics Expedition or Design Architect and circuit simulation/analysis tools (PSPICE, - Analog Workbench).
Knowledge of analog design and analysis, general knowledge of digital circuitry and interfaces.
Knowledge and experience with use of lab common equipment (oscilloscopes, network analyzer, etc.).
Knowledge of electronics manufacturing processes and test equipment.
Knowledge of circuit card and PWB manufacturing processes
Working knowledge of Microsoft Office
Knowledge of Component MIL drawings, standards, test specifications, and associated QPLs and QMLs.
Knowledge of component failure modes by commodity
Knowledge of component selection, screening, qualification, and derating for use in military, and aerospace flight applications
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?
This role is 100% onsite in Huntsville, AL and qualifies for relocation assistance.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-02-16Country:
United States of AmericaLocation:
US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATHPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required on day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The PCAS department is seeking an software, embedded control engineer for algorithm development and implementation in a variety of electromechanical control assemblies.
What You Will Do
You will help design, implement and verify motor control embedded firmware designs for current and future Control Actuation Systems.
You will implement digital control algorithms in C/C++ in conjunction with the Controls and Algorithms team.
Additionally, you will interact with mechanical and electrical design engineers and vendors to optimize hardware designs.
What You Will Learn
You will have the opportunity to perform hands-on hardware and firmware integration and verification testing in a laboratory environment.
Solid understanding of C/C++ development, experience with MATLAB/Simulink and the ability to work with electrical and mechanical hardware.
You will have the opportunity to mentor early career engineers.
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience.
A minimum of 8 years of experience in code design, development and/or verification.
Ability to obtain and maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance.
Qualifications We Value
Experience with C/C++ development on any embedded hardware platforms.
Experience with model development and data analysis in MATLAB/Simulink
Experience of developing firmware or software for safety significant environments including requirements development and traceability, design decomposition and documentation, static code analysis, design to safety critical coding standards such as MISRA-C, test case development, code coverage including modified decision/code coverage (MC/DC), code coverage analysis and formal qualification testing.
A working understanding of configurable logic (FPGA firmware) and VHDL.
Experience implementing digital control algorithms in hardware including embedded microcontrollers, digital signal processors, FPGAs and a working understanding of serial communication interfaces, analog to digital converters, and PWM generators.
Experience working with and integrating hardware.
Basic understanding of modeling and controls of electric motors and solid background in PMSM motor fundamentals
Digital and analog signal electronics design, development and verification.
Use of software/firmware configuration management tools such as GIT, Subversion or similar tools
Strong verbal and written communication and ability to work hands-on in teams.
Basic proficiency with model development and data analysis in MATLAB/Simulink
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Relocation Eligibility
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-02-23Country:
United States of AmericaLocation:
US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATHPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
System Safety / Human System Integration (HSI) Department ensures our products Safety and Human Factors disciplines are incorporated into all our engineering and program execution to provide for our customers critical needs. Location: Huntsville, AL
What You Will Do
This is an exciting opportunity for a highly motivated Senior System Safety Engineer to join our team in Huntsville, AL.
Lead one or more MIL-STD-882E compliant system safety programs
Perform MIL-STD-882E System Safety Program tasks and analyses, or customer’s approved equivalent
Coordinate with customer safety representatives to gain safety approval from appropriate Safety Review Board authorities
Work across all integrated product teams and lines to properly eliminate hazards or provide effective controls.
Collaborate with Program Management and government approval authorities from program startup through production to demilitarization and disposal backgrounds
Perform System Safety Program, Hazard analyses or Design analyses
Brief safety of the program at technical reviews and as part of the safety approval process
Interpret system requirements, customer specifications and military standards
Prepare internal and customer reports describing various analyses relevant to the System Safety program
Collaborate across multiple disciplines to gain a full understanding of product architecture and design
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience.
Experience with System Safety Engineering, Systems Engineering, Software or Firmware Engineering, Electrical Engineering or equivalent Safety Engineering.
The ability to obtain and maintain a U.S. government issued Secret security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.
Qualifications We Prefer
Experience in weapon combat systems, specifically missile system safety experience
Experience with DoD System Safety Programs
Experience with Earned Value Management Systems (EVMS) and Proposal Development
A Master’s degree in Science, Technology, Engineering or Mathematics (STEM).
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
This position requires the ability to obtain a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
Relocation Eligible
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2026-02-17Country:
United States of AmericaLocation:
US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATHPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.
An Electronics Lab Assembly/Solder Technician is responsible for assembling, cabling, and validating complex testing rack test systems. This includes building and repairing cables and connector assemblies as a critical part of the role. Additional responsibilities include assembling and configuring rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance. Additional activities may include basic soldering, fabricating test boxes, or supporting other hardware integration tasks.
The candidate may provide on-the-job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership. The candidate will comply with the company’s FOD program, tool control program, and all safety regulations.
Work primarily includes cabling and assembly of Rack-mounted Test Systems but may also include working with Engineering prototyping.
This position is 100% onsite in Huntsville, Alabama
What you will do
- Assemble and configure rack-mounted devices, troubleshooting and diagnosing system issues, and performing functional validations to ensure assembly quality and performance.
- Perform other activities such as basic soldering, building or repairing cables and connector assemblies, or fabricating test boxes.
- Perform pin crimping, wire routing, and use hand and powered tools.
- Test and troubleshoot systems using multimeters and other diagnostic tools.
- Provide on the job recommendations to solve hardware integration issues with mid and upper-level Engineering and Leadership.
- Perform physical tasks such as retrieving, storing, and installing equipment.
- Work from detailed assembly drawings, schematics, or work instructions.
- Work from verbal instructions and conceptual ideas to a achieve a desired output.
- Recognizing failures and isolating problems and suggesting appropriate corrective action.
- Keeping management appraised of all unresolved and/or potential problems that would negatively affect schedules or quality.
- Manage inventory, paperwork, and maintain organizational standards.
Qualifications You Must Have
- High School Diploma or equivalent (GED) and A minimum of 2 years of work experience.
- Assemble and configure rack-mounted test systems, cables, and harnesses
- Verification/Inspection experience with associated standards, processes, and documentation.
Qualifications Preferred
- Work experience with mechanical and soldering standards, processes, and documentation.
- Experience working within an Engineering Technical Support Environment.
- Ability to read and comprehend instructions, short correspondence, memos, schematics, detailed electronic blueprints, and other similar authorized drawings and documents.
- CCA manufacturing experience.
- Knowledge of Fabrication Standards, Processes, and Documentation.
- IPC J-STD-001 solder certification and IPC 610 and IPC 620 certifications
- Associates Degree in a Technical field.
What We Offer
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
Learn More & Apply Now!
Please consider the following role type definition as you apply for this role.
‒ Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information
Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?
Huntsville Location information: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 41,400 USD - 72,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.
*At Securian Financial the internal position title is Infrastructure Dir."
Mission
"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."
Positioning
The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.
This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.
Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.
Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.
Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.
Scope of Accountability
Resilience Engineering & Cloud Reliability
Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.
Own resilience automation, chaos testing, and IaC-based recovery validation.
Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.
Quality Engineering & Continuous Testing
Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.
Drive automation-first testing (functional, non-functional, performance, resilience).
Embed observability-driven quality validation and contract testing across services.
Performance, Capacity & Efficiency Engineering
Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).
Partner with Platform & Infrastructure teams to tune performance across application and platform layers.
Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.
Cross-Domain Architecture Collaboration
Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.
Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.
Engage Data Architects for data resilience, replication, and pipeline reliability.
Work with Business Architects to align technical reliability goals with critical business outcomes.
Leadership & Talent Development
Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.
Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.
Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.
Core Technical Competencies
AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.
Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.
Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.
Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.
Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.
Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.
Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.
FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.
Leadership Competencies
Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.
Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.
Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.
Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.
Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.
Qualifications & Experience
12+ years in cloud engineering, reliability, or platform leadership roles.
5+ years leading Sr. Managers/Managers in technical domains.
Proven expertise across AWS, with working knowledge of Azure and GCP.
Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.
Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.
Certifications:
Required: AWS Certified Solutions Architect - Professional
Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect
Success Metrics
99.9% availability maintained for Tier-1 workloads.
100% coverage of DR automation for Tier-1 services.
25% annual increase in automated quality/test coverage.
15% annual improvement in resource efficiency and cost performance.
Documented resilience participation across all enterprise architecture blueprints.
Positive "technical peer readiness" and succession rating from Head of REO.
Summary Value Proposition
This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.
It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$145,000.00 - $267,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
RESPONSIBILITIES:
- Architect, design, and maintain scalable CI/CD pipelines using Azure/AWS DevSecOps.
- Build and optimize Docker-based microservices, images, and deployment pipelines.
- Lead deployments across Docker Swarm, Kubernetes/EKS, and multi-location environments.
- Develop infrastructure automation using Ansible, bash scripting, Terraform and Git-based workflow.
- Manage release pipelines using container registries, artifact feeds, template pipelines, and multi-stage workflows.
- Design multi-environment strategies for dev, QA, staging, and production deployment.
- Implement cloud-native services with AWS & Azure cloud platforms.
- Implement basic security practices, including IAM roles, secrets management, and access controls.
- Develop secure, modular, reusable build and release systems.
- Work closely with full-stack engineering teams (Angular, Java, Python , backend APIs, database engineers).
- Mentor junior DevOps engineers and lead DevOps roadmap decisions.
KNOWLEDGE REQUIREMENTS:
DevOps Expertise:
Azure DevOps pipelines, YAML templating, CI/CD strategy, Git branching models.
Containerization & Orchestration:
Docker images, Docker Compose, Docker Swarm, multi-node/multi-location deployments.
Cloud Technologies:
Azure deployments & infrastructure, AWS (IAM, Lambda, S3, CloudWatch).
Programming / Scripting Languages:
Python, Bash, Linux/Unix administration, awk, shell automation, groovy.
Infrastructure Automation:
Ansible playbooks, tasks/roles, inventory design, configuration management.
Distributed Deployment Architecture:
Multi-site replication, node selection by IP, dynamic service routing.
Database Stack Experience:
PostgreSQL, MySQL, MariaDB operations & migrations.
Observability & Logging:
CloudWatch monitoring, log collection, Prometheus, Grafana, reporting & metrics.
Version Control & Build Systems:
Azure Devops, Git, Git submodules, artifact storage, registry solutions, Secrets Management.
Nice to have AI knowledge/experience and willingness to learn.
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science or related field. MS preferred.
- 7+ years experience in a software devops/development/test capacity with enterprise server, storage or networking products.
Remote working/work at home options are available for this role.
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Title : Principal Mechanical Design Engineer
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education :
Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience :
8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master’s Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Title : Principal Mechanical Design Engineer
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education :
Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience :
8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master’s Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES · Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS · Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
