Engineering Jobs in Kingston, WA

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington.

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks.

This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements.

You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank.

Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications.

Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.

If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities : Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies.

Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers.

Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications.

Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations.

Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments.

Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications.

Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications.

Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors.

Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required.

Use precision measuring instruments to verify that quality standards are achieved.

Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures.

Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary.

Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

Work in environments that may involve contact with metals, solvents, and coolants.

Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

Adapt to varying noise levels and atmospheric conditions.

Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.

§ 120.15 is required .

“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.

Failure to complete the assessment will remove you from consideration.

Basic Qualifications (Required Skills/Experience): 1 years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

1 years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

1 years of experience using high impact vibratory tools; such as bucking/riveting.

Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

Ability to lift up to 35lbs.

Ability to work in Confined Spaces (work within or pass through).

Entry diameter 9.5”X17.7”.

Proficiency in reading, writing, and speaking English.

Preferred Qualifications : 1 years of experience performing aircraft structural work or equivalate.

Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience: High school graduate or GED preferred.

Relocation: This position offers relocation based on candidate eligibility.

Drug Free Workplace : Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift : This position is for a variety of shifts.

Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent .

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations .

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr.

10, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett , Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices.

Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results.

You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards.

Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment.

If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.

If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities: Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.

Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.

Verify that the correct materials and tools are issued and free from visible defects before starting work.

Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.

Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.

Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.

Use precision measuring instruments, such as dial indicators, to align and level the layup table as required.

Retrieve and download CNC programs to the machine controller from the mainframe server.

Set machine coordinates and adjust offsets, tool heights, and laser settings using the controller keyboard or pendant.

Run the machine to lay graphite plies, copper ampe plies, and perform hand trimming and rework as necessary.

Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.

Move finished parts and tools using appropriate material handling equipment as required.

Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.

Perform quality checks after each operation to ensure parts meet specifications and are free from defects.

Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

Work in environments that may involve contact with metals, solvents, and coolants.

Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

Adapt to varying noise levels and atmospheric conditions.

Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.

§ 120.15 is required.

“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications : 1 Years of experience using precision measuring tools.

1 Years of experience with multi-axis Numerical Control (NC) machines.

1 Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.

1 Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.

Able to stand and walk throughout work shift (6 hours) as well as carry and lift up to 25 pounds.

Preferred Qualifications: 1 Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.

Experience working with and around hazardous materials (while using the proper protective equipment).

Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience: High school graduate or GED preferred.

Relocation: Relocation assistance is not a negotiable benefit for this position.

Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement : This position is for a variety of shifts.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar.

22, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray A -Major Assemblies to join our Joint and Installation team in Everett and Renton, Washington.

As a Painter Spray A
- Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft.

Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish.

You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements.

Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment.

Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.

If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities: Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.

Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.

Prepare surfaces to ensure proper adhesion, including corrosion removal and paint stripping as needed.

Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.

Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.

Mask and unmask areas to facilitate corrosion removal or painting operations.

Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.

Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.

Operate automated spray equipment, such as robots, for preparation and painting tasks.

Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.

Monitor and maintain time-sensitive materials and processes throughout the painting operation.

Support customer inspections as required and screen work instructions to ensure proper workflow.

Apply decals, part markings, and wrap finished parts or assemblies as required.

Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.

Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.

Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

Work in environments that may involve contact with metals, solvents, and coolants.

Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

Adapt to varying noise levels and atmospheric conditions.

Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.

§ 120.15 is required.

“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.

Failure to complete the assessment will remove you from consideration.

Basic Qualifications: 1 years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.

1 years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.

1 years of experience mixing paints.

1 years experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

1 years of experience handling chemicals and/or hazardous materials Experience working from heights & using fall protection equipment with weight limitations.

Preferred Qualifications: 1 year of experience performing aircraft or autobody painting and finishing operations.

Completed 1 year of autobody paint/collision repair in high school or community and technology college academic program.

Typical Education & Experience: High school graduate or GED preferred.

Relocation: This position offers relocation based on candidate eligibility.

Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range : $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar.

31, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team.

In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements.

Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.

If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.

Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.

Conduct continuity checks to ensure proper functionality of electrical systems.

Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.

Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling.

Typically assigned work that has been previously sequenced.

Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.

Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.

Perform hand forming of electrical wiring and soldering as required to complete work assignments.

Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.

Execute necessary riveting tasks as part of the assembly process.

Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

Work in environments that may involve contact with metals, solvents, and coolants.

Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

Adapt to varying noise levels and atmospheric conditions.

Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.

§ 120.15 is required.

“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications 1 years of experience in electrical assembly installation.

1 years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).

1 years of experience handling chemicals and/or hazardous materials.

Ability to recognize colors.

Ability to work in confined spaces.

Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.

Proficiency in reading, writing, and speaking English.

Preferred Qualifications: 1 years of experience as an Electrician or Apprentice.

Completion of an electrical trade school program or have military related electrical experience.

Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience: High school graduate or GED preferred.

Relocation: Relocation assistance is not a negotiable benefit for this position.

Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Jul.

09, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components.

In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies.

Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies.

You will operate advanced material handling equipment to efficiently load and unload engines and struts.

Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence.

If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.

If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities: Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.

to 15-35 lbs.

Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

Work in environments that may involve contact with metals, solvents, and coolants.

Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

Adapt to varying noise levels and atmospheric conditions.

Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S.

export control compliance requirements, a “U.S.

Person” as defined by 22 C.F.R.

§120.62 is required.

“U.S.

Person” includes U.S.

Citizen, U.S.

National, lawful permanent resident, refugee, or asylee.

Do you meet this requirement? Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications : 1 years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

1 year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

Ability to lift up to 35 pounds.

This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

Proficiency in reading, writing, and speaking English Preferred Qualifications: 1 years of experience performing aircraft structural work or equivalate.

1 years of experience using high impact vibratory tools; such as bucking/riveting.

Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience: High school graduate or GED preferred.

Relocation: Relocation assistance is not a negotiable benefit for this position.

Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement: This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay : $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Sept.

04, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Tooling and Machined Parts to join our Quality team in Puget Sound in Washington.

As an Inspector for Tooling and Machined Parts, you will be essential in ensuring the highest standards of quality and safety in our manufacturing processes.

Your keen attention to detail will enable you to conduct thorough inspections of tooling and machined parts, verifying compliance with stringent specifications and quality standards.

To excel in this role, it is important to note that employees must pass visual acuity and color perception eye examination tests to ensure accuracy in evaluations.

You will collaborate closely with engineering and quality assurance teams to identify and resolve any discrepancies, ensuring that all components meet operational requirements.

Your expertise will also be critical in performing audits and surveillance of manufacturing processes, contributing to continuous improvement initiatives.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.

If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities: Obtain daily work assignments from the team leader or supervisor and review work orders and blueprints to determine required tasks.

Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

Inspect mockups of engineering design changes to ensure adherence to specifications.

Perform line checks to investigate whether rejectable conditions exist on other assemblies or airplanes.

Indicate Quality Assurance acceptance by stamping the appropriate paperwork and processing completed records.

Review previously accepted systems, customer requirements, or FAA conformities to determine if re-inspection is required.

Work with engineering and the FAA on red label equipment to ensure proper segregation from production parts.

Document discrepancies and report them to the appropriate personnel for resolution.

Assist in the training and instruction of lower-grade inspectors, providing guidance as needed.

Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.

to 15-35 lbs.

Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

Work in environments that may involve contact with metals, solvents, and coolants.

Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

Adapt to varying noise levels and atmospheric conditions.

Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite.

The selected candidate will be required to work on-site at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.

§ 120.15 is required.

“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications : 3 years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).

3 years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.

1 years of experience calibrating and/or using coordinate measurement machines, laser trackers, and/or optical measurement devices.

Experience as a Quality Inspector.

Experience working with Microsoft Office (Excel, Word, PowerPoint).

Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

Ability to complete Fall Protection Training.

Preferred Qualifications: Experience inspecting welds / welds certification Equivalent education and/or related work experience (Higher education includes college, university, technical school, licensing/certification programs, etc.) Typical Education & Experience: High school graduate or GED preferred.

Relocation: Relocation assistance is not a negotiable benefit for this position.

Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $31.32/hour, with potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar.

27, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Boeing Commercial Air planes is excited to offer opportunities for a Decorative Interior Repairperson to join our Joint and Installation team in Renton or Everett , Washington.

As a Decorative Interior Repairperson, you will be essential in ensuring that our aircraft interiors meet the highest standards of quality and safety.

Your expertise will be vital in identifying and documenting any visible defects during thorough inspections, allowing you to execute precise repairs on interior trim and furnishings.

By utilizing detailed specifications and prints, you will ensure that all materials used are appropriate and effective for the aircraft .

Additionally, you will be required to pass an eye examination for color perception to ensure optimal performance in your role.

Your meticulous approach will involve disassembling components, cleaning surfaces, and applying various finishes to achieve a flawless appearance.

Collaboration with engineering and planning teams will be key as you address any challenges that arise, ensuring that all repairs conform to established procedures and specifications.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.

If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities : Obtain work assignments from the team leader or review relevant paperwork to determine tasks.

Perform walk-through inspections of aircraft interiors to identify and document visible defects for repair.

Make repairs to interior trim and furnishings using materials such as plastics, vinyl, and metal, and remove stains or scratches.

Use prints, specifications, and documents necessary to accomplish work effectively.

Obtain and verify kitted repair supplies, ensuring color combinations are suitable for the aircraft .

If supplies are not pre-picked, gather specified materials from storage areas as outlined in installation plans or non-conformance records.

D isassemble defective interior trim parts using hand tools and clean surfaces prior to applying new materials.

Apply potting compounds, primers, adhesives, and special finishes as required by specifications and work orders.

Fit and assemble detail components to repaired parts according to specifications and drawings.

Paint or touch up repair areas using appropriate tools to achieve the desired finish, including mixing and matching paint as needed.

Rework materials per engineering specifications and incorporate changes as needed, including leather repairs and touch-ups.

Remove marks and scratches from metal surfaces using appropriate tools and techniques.

Seal edges of repair areas with color-matched sealant as required .

Consult with engineering, planning, and inspection on job-related issues and contact team leaders or supervisors when assistance is needed.

Document repairs identified by other mechanics and maintain personal certifications as required .

Physical Demands and Potential Hazards : Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

Work in environments that may involve contact with metals, solvents, and coolants.

Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

Adapt to varying noise levels and atmospheric conditions.

Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job dutie s.

This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.

§ 120.15 is required .

“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications : 1 years of experience working with vinyl wallpaper, composites/non-metallic materials .

Experience applying and evaluating decorative paint/ink for color match.

Ability to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all time.

Preferred Qualifications: 1 years of experience with aerospace or automotive spray painting.

Experience working with detailed work instructions or reading and interpreting blueprints and drawings.

Experience with touch-up painting.

Enrollment in a Boeing partnered manufacturing related high school, community and technical college academic program.

Typical Education & Experience: High school graduate or GED preferred.

Relocation: Relocation assistance is not a negotiable benefit for this position.

Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace : Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent .

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations .

Pay: $24.32 per hour with potential to earn up to $48.58 per hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar.

21, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place.

We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Integral Fuel Cells to join our Quality team in Everett and Renton, Washington.

As an Inspector for Integral Fuel Cells, you will be crucial in maintaining the integrity and safety of our aircraft operations.

This position requires working in confined spaces within the wing fuel cells, where employees must crawl through an opening of 9.5” x 17.7" to access the fuel cell.

Your expertise will be vital in inspecting the cleaning, sealing, and coating processes, as well as conducting thorough leak checks to identify and resolve any issues.

Collaborating closely with Engineering, Quality, and Manufacturing teams, you will implement improvements in build processes and drive initiatives for defect reduction.

Certification for visual acuity and color perception may also be required.

Your ability to use precision measuring instruments and interpret technical documentation will ensure that all components meet stringent specifications, allowing you to make a significant impact on our operations.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.

If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities: Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.

Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.

Inspect final assemblies, subassemblies, and installations of parts and systems for workmanship, fit, alignment, and conformance with applicable drawings and specifications.

Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.

Initiate and document any nonconforming materials or assemblies according to specifications and procedures.

Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.

Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.

Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.

Perform in-process inspections, including checks for torque, sealant applications, and electrical bonding.

Document any discrepancies and report them to the appropriate personnel for resolution.

Verify that parts and assemblies have been properly cleaned and that sealants, primers, and finishes are applied per specifications.

Witness and document functional tests of aircraft components and systems to detect leaks.

Perform shakedown inspections on completed assemblies prior to customer acceptance, documenting any discrepancies.

Maintain personal and tool certifications, ensuring compliance with operational standards.

Assist and train other employees on inspection methods and procedures, providing guidance as needed.

Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.

to 15-35 lbs.

Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

Work in environments that may involve contact with metals, solvents, and coolants.

Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

Adapt to varying noise levels and atmospheric conditions.

Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.

§ 120.62 is required.

“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications: 2 years of experience as a Quality Inspector or in a related inspection role within a similar industry , such as, but not limited to, Aerospace and Manufacturing.

Ability to work in confined spaces (work within or pass through).

Entry diameter 9.5”X17.7”.

Ability to complete Fall Protection Training.

Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

Ability to use a respirator or have been respirator certified.

Proficiency in reading, writing, and speaking English.

Preferred Qualifications: Experience working with precision measuring tools.

Experience sealing Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience: High school graduate or GED preferred.

Relocation: Relocation assistance is not a negotiable benefit for this position.

Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement: This position is for a variety of shifts.

Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $27.32 /hour, with potential to earn up to $57.88 /hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Aug.

31, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship Employer will not sponsor applicants for employment visa status.

Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Inspector to join our Field team in Everett, Washington.As an Aviation Maintenance Inspector, you will be instrumental in upholding the highest standards of quality and safety within our aircraft maintenance operations.

Your primary responsibility will be to conduct thorough inspections of aircraft structures, systems, and components, ensuring compliance with industry regulations and safety protocols.

You will meticulously evaluate maintenance work, troubleshoot issues, and document any nonconforming materials or processes to maintain rigorous quality assurance.

A Color Vision Certification may be necessary for portions of this job.

Your expertise will be essential in performing airworthiness inspections and coordinating with regulatory bodies, ensuring that all aircraft are flight-ready and meet stringent specifications.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.

If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Conduct audits and surveillance of all manufacturing and quality assurance processes, ensuring compliance with specifications, processes, and procedures.Perform quality functions, including customer and FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections (both pre-flight and post-flight).Initiate and document any nonconforming materials, hardware, software, tools, parts, or assemblies in accordance with established specifications and procedures.Utilize technical specifications, sketches, manuals, and FAA publications to effectively accomplish inspection assignments.Maintain all company and FAA-required records and inspection forms, ensuring accuracy and compliance.Uphold a safe, clean, and organized work environment while planning and organizing work packages to promote efficient operations and meet predetermined schedules.Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks.Interpret and adhere to airworthiness directives, service bulletins, and other approved data to ensure compliance.Apply mathematical calculations to set up and use precision measuring tools for accurate measurements of gaps, heights, angles, and hole dimensions.Create production aids as needed to facilitate inspection assignments.Maintain necessary certifications, licenses, and permits required for the role.Exchange information with suppliers, customers, and company representatives to explain or demonstrate operations, tests, or any difficulties encountered.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights up to 35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.

§ 120.62 is required.

“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration.Basic Qualifications:5+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g.

hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience).Must be willing to work any shift; including days, evenings, nights, and weekends.Preferred Qualifications:FAA Airframe and Powerplant Certificate.

Please note your certificate number on your resume if you are certified.10+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g.

hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience).Conflict of Interest:Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.Safety Sensitive Statement:This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Apr.

06, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Technician to join our Field team in Everett, Washington.As an Aviation Maintenance Technician, you will be essential in maintaining the highest standards of quality and safety in aircraft operations.

Your role will involve performing a wide range of maintenance tasks on aircraft structures and systems, where your attention to detail and adherence to safety protocols are critical.

A Color Vision Certification may be necessary for portions of this job.

You will troubleshoot and inspect aircraft to ensure they are flight-ready, diligently documenting all maintenance activities to comply with industry regulations.

Your technical expertise will enable you to execute repairs and modifications effectively, ensuring that all work meets stringent specifications.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.

If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Perform production installations, maintenance, preventative maintenance, and alterations on aircraft structures, systems, and sub-systems, including electrical and avionics, for both standard and experimental certificated aircraft.Troubleshoot, inspect, test, repair, and service aircraft and engine systems to ensure they are flight-ready, documenting any nonconforming materials or components according to established specifications and procedures.Conduct audits and surveillance of manufacturing and quality assurance processes, including customer/FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections.Utilize technical specifications, sketches, manuals, and FAA publications to effectively complete work assignments.Maintain company and FAA-required records and inspection forms while ensuring a safe, clean, and organized work environment.Plan and organize work packages to promote safe and efficient operations, meeting predetermined schedules.Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks.Interpret and adhere to airworthiness directives, service bulletins, and other approved data.Apply mathematical calculations to set up and use precision measuring tools for accurate measurements.Create production aids as needed to facilitate work assignments.Maintain necessary certifications, licenses, and permits for assigned work.Exchange information with suppliers, customers, or company representatives to explain or demonstrate operations and tests.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights up to 35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.

The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.

§ 120.62 is required.

“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.  Failure to complete the assessment will remove you from consideration.Basic Qualifications:3+ years of experience with aircraft maintenance on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience) OR with troubleshooting electrical systems or complex mechanical systems (e.g.

hydraulics, pneumatics, heavy machinery, diesel, construction).Must be willing to work any shift, including days, evenings, nights, and weekends.Preferred Qualifications:FAA Airframe and Powerplant Certificate.

Please note your certificate number on your resume if you are certified.5+ of aircraft maintenance experience on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience)Conflict of Interest:Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.Safety Sensitive Statement:This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Apr.

06, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.