Jobs in Garland, TX
550 positions found — Page 9
Test Engineering Tech III
Salary not disclosed
JOB SUMMARYESSENTIAL DUTIES AND RESPONSIBILITIES· Provides input for colleague's performance appraisals· Assists Test Engineers when commissioning new test equipment.· Provides technical assistance to other technicians on the same shift.· Provides line support to manufacturing for all test processes.· Ensures "machine down" calls are responded to in a timely manner.· Liaises with manufacturing to determine repair priorities.· Ensures adequate spares are available for all allocated equipment.· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.· Escalates to Test Engineers any unresolved/ongoing issues.· Instructs operators on safe/effective use of test equipment.· Provides daily report of all line issues.· Provides weekly/quarterly downtime reports for allocated equipment.· Sources spares from the most cost effective supplier.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.· Ability to define problems, collect data, establish facts, and draw valid conclusions.· Ability to operate a personal computer including using a Windows based operating system and related software.· Advanced PC skills, including training and knowledge of Jabil's software packages.· Ability to write simple correspondence.
Read and understand visual aid.· Ability to apply common sense understanding to carry out simple one- or two-step instructions.· Ability to deal with standardized situations with only occasional or no variables.· Ability to read and comprehend simple instructions, short correspondence, and memos.· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday
- Friday 3:00 p.m.
- 11:30 p.m.
permanent
SMT Engineering Technician (2nd Shift - 3-11pm M-F)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job SummaryThe SMT Engineering Technician Night Shift will support the manufacturing process by maintaining Surface Mount Technology (SMT) equipment, troubleshooting production issues, and ensuring optimal machine performance during night operations to meet production targets.Job Responsibilities
- Perform preventative maintenance and calibration on SMT equipment (e.g., screen printers, pick-and-place machines, reflow ovens, AOI) according to established schedules and procedures.
- Diagnose and repair complex SMT equipment malfunctions, including mechanical, electrical, and software issues, in a timely manner to minimize downtime.
- Assist engineers in process optimization, equipment setup, and the development of new manufacturing processes and procedures.
- Monitor SMT line performance, identify potential issues, and implement corrective actions to improve efficiency, quality, and yield.
- Provide technical support to production operators, offering guidance and training on SMT equipment operation and basic troubleshooting.
- Document all maintenance activities, repairs, and process changes accurately and thoroughly.
- Participate in root cause analysis for production defects and implement effective solutions.
- Adhere to all safety regulations and company policies, maintaining a clean and organized work environment.
- Collaborate effectively with cross-functional teams, including production, quality, and engineering, to resolve issues and achieve production goals.
- Flexibility to work night shifts, including weekends and holidays as required.
Job Qualifications
- Associate's degree in Electronics, Mechatronics, or a related technical field, or equivalent practical experience.
- Minimum of 3-5 years of experience as an SMT Technician or similar role in a high-volume manufacturing environment.
- Strong understanding of SMT processes, equipment operation, and common defects.
- Proficiency in troubleshooting and repairing complex SMT machinery, including electrical, mechanical, and pneumatic systems.
- Ability to read and interpret schematics, technical drawings, and equipment manuals.
- Experience with various SMT equipment manufacturers (e.g., Fuji, Panasonic, Mycronic, Juki, DEK, MPM, BTU, Koh Young, Mirtec) is highly desirable.
- Familiarity with IPC standards and quality control principles.
- Excellent problem-solving skills and attention to detail.
- Strong communication and interpersonal skills, with the ability to work independently and as part of a team.
- Proficient in using standard hand tools, diagnostic equipment, and computers.
- Ability to lift up to 35 lbs and stand for extended periods.
permanent
Site Engineering Manager
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Jabil is seeking a Site Engineering Manager to lead industrial engineering, facilities engineering, and site infrastructure for a fast‐growing electronics manufacturing operation. This leader will drive production efficiency, equipment reliability, and site readiness across high‐mix/high‐volume PCB assembly and secondary processes.
What You'll Do
- Lead and develop a multidisciplinary engineering team, building technical capability, coaching future leaders, and fostering a culture of continuous improvement.
- Oversee process engineering across SMT lines, secondary processes (e.g., conformal coating, selective coating, potting), and automated inspection systems (AOI/AXI, Neptune, etc.).
- Optimize production layouts, workflows, and capacity to support throughput, cost, and quality targets.
- Direct facilities operations, including preventive maintenance, building infrastructure, utilities, space planning, and site expansion projects.
- Ensure safety, environmental compliance, and readiness of all site systems supporting electronics manufacturing.
- Manage engineering budgets, capital planning, and resource allocation, understanding how engineering decisions influence productivity, cost structure, and P&L performance.
- Partner cross‐functionally with Operations, Quality, Supply Chain, and EHS to support scalable growth and new product introduction.
What You Bring
- Bachelor's degree in engineering or related field, plus 5-8 years' related experience and 2-3 years in a management role required, or equivalent combination of education and experience.
- Experience in electronics manufacturing environments with exposure to SMT assembly, PCBA flow, coating applications, and automated inspection technologies.
- Strong foundation in industrial engineering principles, facilities management, and continuous improvement methodologies.
- Proven ability to develop people, strengthen engineering organizations, and build succession pipelines.
- Analytical, data‐driven decision maker with awareness of cost drivers, ROI, and financial impact of engineering initiatives.
- Effective communicator and collaborator with a hands‐on leadership style.
permanent
Diagnostic Technician II
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARYResponsible for the verification testing, diagnosing and repairing of electronic circuit board assemblies.
First Shift: Monday
- Friday 6:00 a.m.
- 2:30 p.m.ESSENTIAL DUTIES AND RESPONSIBILITIES· Diagnose and repair to basic powered functional test failures (power, traffic, network issues) to a component level on electronic circuit board assemblies while maintaining minimal quantities of Engineering and Component hold assemblies.· Exhibit proficiency in the use of electronic test and measurement equipment.· Understand and utilize assembly documentation such as but not limited to the following; Schematics, BOM's, EC documents, Visuals, Debug, Testing tools and procedures.· Assist Test Engineering department in an ongoing data evaluation program for improving the efficiency of the diagnosis of assemblies.· Understand, recognize and execute Jabil production requirements, rules, policies and procedures.· Work as a team member to achieve Diagnostic department's process yield goals.· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.· Ability to define problems, collect data, establish facts, and draw valid conclusions.· Ability to operate a personal computer including using a Windows based operating system and related software.· Advanced PC skills, including training and knowledge of Jabil's software packages.· Ability to write simple correspondence.
Read and understand visual aid.· Ability to apply common sense understanding to carry out simple one- or two-step instructions.· Ability to deal with standardized situations with only occasional or no variables.· Ability to read and comprehend simple instructions, short correspondence, and memos.· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
permanent
C
RN Registered Nurse (Homecare)
Salary not disclosed
Registered Nurse (RN) Pediatric Home Health
Sign-On Bonus Opportunity!
Eligible candidates may qualify for a $1500sign-on bonus* as part of their total compensation package. Bonus eligibility and payout structure will be discussed early in the interview process.
A Nursing Role Built for Focused, One-on-One Care
At Care Options for Kids, pediatric home health nursing is intentionally different. Instead of juggling multiple patients, alarms, and constant interruptions, you provide dedicated, one-on-one care in the home, allowing you to focus fully on your patient and use your clinical judgment with confidence.
In this role, you'll care for pediatric patients with high acuity needs while building consistent relationships with both the child and their family. Nurses who thrive here value autonomy, continuity of care, and the ability to deliver skilled nursing in a calm, controlled environment, backed by real clinical support whenever it's needed
If you're an RN looking for a role where you can practice nursing with focus, purpose, and support, this position was designed with you in mind.
Care Options for Kids Benefits
- Weekly Pay and Direct Deposit
- Paid Time Off (PTO) and flexible scheduling
- Medical, Dental, and Vision Insurance
- 401(k) Retirement Plan
- Employee Referral Bonus Opportunities
- Career Advancement Opportunities
- Training and Competency Development
- Respiratory Therapists on Staff to Provide Training and Mentorship
- 24/7 On-Call Clinical Support
Support That Keeps You Safe and Confident
- Easy-to-use Employee Portal that puts you in control, request shifts that fit your schedule and preferences, earn Care Bucks rewards, and stay connected to the COFK community.
- 24/7 on-call clinical support whenever you need it
- Training and competency support for high-acuity care
- Clear care plans and physician orders
- PPE provided in every home, including masks, gloves, and hand sanitizer, with care aligned to CDC safety guidelines
- A dedicated team focused on nurse safety and success
Requirements
- Current, active Texas RN license
- Current BLS CPR card (obtained in-person, not online)
- G-tube, trach, vent experience, or willing to train
Care Options for Kids is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
*Restrictions Apply. Connect with Talent Acquisition Specialist for details on Sign On Bonus eligibility and payout schedule.
#RDNUDAL
Salary:
$28.00 - $37.00 / hour
permanent
U
Registered Nurse
🏢 US Navy
$180,000
Many nurses find the joy of serving others to be incredibly rewarding. This is especially true in the Navy Nurse Corps. When you work to improve the lives of others, you can vastly improve your own as well - both professionally and personally. As a Navy Nurse, you will serve your country by helping not only those in the military, but also their families and people in need around the globe. Excellent scholarship opportunities mean you have the potential to graduate from nursing school debt-free, and specialty training opportunities can give you a competitive edge in your field.
Want to start your journey with the Navy?
Apply Now
Officer None
Navy Nurse Corps: What to Expect
Nurse Corps Officer
Anesthesiology
More Information About Navy Nursing
Responsibilities
As an Officer in the Nurse Corps, you'll provide high-quality nursing care wherever there's a need, from Navy medical facilities and ships to humanitarian aid missions overseas. You'll work closely with other health providers to carry out job responsibilities such as:
Providing general nursing care for Sailors, Marines, other service members and their families at the best military nursing facilities on shore, at sea and in the field
Collaborating with Physicians, Surgeons, Cardiologists and other specialists to create and administer treatment plans
Directing and instructing Hospital Corpsmen on how to provide quality patient care
Applying leading-edge medical advances at world-class hospitals
Utilizing some of the most advanced technology on the planet, such as Radio Frequency Identification (RFID), which can lead to less paperwork and more meaningful patient care
Assisting with global relief efforts such as distributing vaccines or providing emergency care to victims of natural disasters
Work Environment
Nurse Corps Officers may serve at any one of more than 250 Navy and medical facilities around the globe, from Hawaii to Japan, Germany to Guam, and Washington, D.C., to Washington state. As a Navy Nurse, you may work at one of the highly acclaimed National Naval Medical Centers in Bethesda, MD, Portsmouth, VA, or San Diego, CA. You might even provide medical support aboard one of two dedicated hospital ships-the USNS Comfort and USNS Mercy. Additional opportunities are available on surface ships, with aircraft squadrons, or even with the Fleet Marine Force.
Training & Advancement
Upon commissioning, Nurses who are new to the Navy are required to attend Officer Development School (ODS) in Newport, RI. ODS is a five-week program designed to introduce you to Navy culture. Nurses commissioned through a school ROTC program may not need to attend ODS.
Officer training is complete, you will learn the ins and outs of life as a Navy Nurse before receiving your first posting. Promotion opportunities are regularly available but competitive and based on performance.
The Navy provides Nurse Corps Officers the opportunity to specialize based on manning needs. Specialization fields include:
Nurse Anesthetists
- Administer general and regional anesthesia, monitor patients receiving anesthesia, and assist in instructing medical trainees and other Officers
Primary Care Nurse Practitioners
- Provide comprehensive health care and health maintenance for service members and their families
Medical-Surgical Nurses
- Assess, plan and implement direct nursing care of patients on an assigned unit, and assume charge nurse responsibilities
Perioperative Nurses
- Plan, implement and evaluate nursing care of surgery patients
Critical Care Nurses
- Provide highly skilled, specialized nursing care to critical patients, including en route care, and train personnel in critical care nursing procedures
Mental Health Nurses and Nurse Practitioners -
Provide direct patient care in mental health services, and lead and train other military and civilian personnel
Military-specific Specializations
- Education and training, manpower systems analysis, and nursing research
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in the medical field.
Education Opportunities
Wherever you are in your nursing career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Available offers consist of scholarships, sign-on bonuses and loan repayment assistance. Help can be available if you're in graduate school or already in practice as well.
For High School Students:
Through a Naval Reserve Officers Training Corps (NROTC) Nurse Option scholarship, the Navy can cover the full cost - up to $180,000 - of your nursing education at some of the best colleges and universities in the country.
For Nursing Students:
If you're a nursing student opting to serve full-time in the Navy, you may get up to $34,000 to help pay your way through nursing school through the Nurse Candidate Program (NCP).
For Graduate Students:
If you're a graduate student enrolled in a postgraduate nursing program in certain nursing specialties and opting to serve part-time in the Navy Reserve, you may qualify for up to $50,000 in nursing school loan repayment assistance.
For Practicing Nurses:
If you're a practicing nurse opting to serve part-time in the Navy Reserve, you may qualify for an immediate, one-time sign-on bonus of up to $30,000. Depending on your specialty, you may have the option of choosing between a sign-on bonus, nursing school loan repayment assistance or specialty pay.
To learn what you qualify to receive, request a medical recruiter contact you.
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer. You must also attend Officer Training. There may be exceptions to the degree requirements based on extensive service experience. Additional qualifications include:
U.S. Citizen between the ages of 18 and 41
Currently licensed and practicing nursing in the U.S. (new graduates must obtain a license within one year of beginning Active Duty service)
In good standing (as a student or graduate) with a CCNE-accredited U.S. education program granting a Bachelor of Science degree
Willing to serve a minimum of three years Active Duty
In good physical condition and able to pass a full medical examination
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
When serving part-time as a Navy Reserve Nurse, your duties are carried out during your scheduled drilling and training periods. During monthly drilling, Nurse Corps Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, you may serve anywhere in the world, including locations in the U.S., at bases overseas, or in areas where humanitarian needs are great.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Nurses in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET):
Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
For current or former Officers of military branches other than the Navy (OSVET), as well as for Officer candidates without prior military experience:
Officer Candidates are required to attend Officer Development School (ODS) in Newport, RI. ODS is a five-week program that provides a comprehensive and intense introduction to the responsibilities of Navy Staff Corps Officers. Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
With flexible training options, Nurses in the Navy Reserve can comfortably balance civilian and military schedules. Additionally, professional nurses who choose to serve as Reserve Sailors in the Navy Nurse Corps may qualify for special offers. Depending on your specialty, you may qualify for an accession bonus or specialty pay.
Compare Navy Careers
See how a career as a Navy Nurse compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
Want to start your journey with the Navy?
Apply Now
Officer None
Navy Nurse Corps: What to Expect
Nurse Corps Officer
Anesthesiology
More Information About Navy Nursing
Responsibilities
As an Officer in the Nurse Corps, you'll provide high-quality nursing care wherever there's a need, from Navy medical facilities and ships to humanitarian aid missions overseas. You'll work closely with other health providers to carry out job responsibilities such as:
Providing general nursing care for Sailors, Marines, other service members and their families at the best military nursing facilities on shore, at sea and in the field
Collaborating with Physicians, Surgeons, Cardiologists and other specialists to create and administer treatment plans
Directing and instructing Hospital Corpsmen on how to provide quality patient care
Applying leading-edge medical advances at world-class hospitals
Utilizing some of the most advanced technology on the planet, such as Radio Frequency Identification (RFID), which can lead to less paperwork and more meaningful patient care
Assisting with global relief efforts such as distributing vaccines or providing emergency care to victims of natural disasters
Work Environment
Nurse Corps Officers may serve at any one of more than 250 Navy and medical facilities around the globe, from Hawaii to Japan, Germany to Guam, and Washington, D.C., to Washington state. As a Navy Nurse, you may work at one of the highly acclaimed National Naval Medical Centers in Bethesda, MD, Portsmouth, VA, or San Diego, CA. You might even provide medical support aboard one of two dedicated hospital ships-the USNS Comfort and USNS Mercy. Additional opportunities are available on surface ships, with aircraft squadrons, or even with the Fleet Marine Force.
Training & Advancement
Upon commissioning, Nurses who are new to the Navy are required to attend Officer Development School (ODS) in Newport, RI. ODS is a five-week program designed to introduce you to Navy culture. Nurses commissioned through a school ROTC program may not need to attend ODS.
Officer training is complete, you will learn the ins and outs of life as a Navy Nurse before receiving your first posting. Promotion opportunities are regularly available but competitive and based on performance.
The Navy provides Nurse Corps Officers the opportunity to specialize based on manning needs. Specialization fields include:
Nurse Anesthetists
- Administer general and regional anesthesia, monitor patients receiving anesthesia, and assist in instructing medical trainees and other Officers
Primary Care Nurse Practitioners
- Provide comprehensive health care and health maintenance for service members and their families
Medical-Surgical Nurses
- Assess, plan and implement direct nursing care of patients on an assigned unit, and assume charge nurse responsibilities
Perioperative Nurses
- Plan, implement and evaluate nursing care of surgery patients
Critical Care Nurses
- Provide highly skilled, specialized nursing care to critical patients, including en route care, and train personnel in critical care nursing procedures
Mental Health Nurses and Nurse Practitioners -
Provide direct patient care in mental health services, and lead and train other military and civilian personnel
Military-specific Specializations
- Education and training, manpower systems analysis, and nursing research
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in the medical field.
Education Opportunities
Wherever you are in your nursing career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Available offers consist of scholarships, sign-on bonuses and loan repayment assistance. Help can be available if you're in graduate school or already in practice as well.
For High School Students:
Through a Naval Reserve Officers Training Corps (NROTC) Nurse Option scholarship, the Navy can cover the full cost - up to $180,000 - of your nursing education at some of the best colleges and universities in the country.
For Nursing Students:
If you're a nursing student opting to serve full-time in the Navy, you may get up to $34,000 to help pay your way through nursing school through the Nurse Candidate Program (NCP).
For Graduate Students:
If you're a graduate student enrolled in a postgraduate nursing program in certain nursing specialties and opting to serve part-time in the Navy Reserve, you may qualify for up to $50,000 in nursing school loan repayment assistance.
For Practicing Nurses:
If you're a practicing nurse opting to serve part-time in the Navy Reserve, you may qualify for an immediate, one-time sign-on bonus of up to $30,000. Depending on your specialty, you may have the option of choosing between a sign-on bonus, nursing school loan repayment assistance or specialty pay.
To learn what you qualify to receive, request a medical recruiter contact you.
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer. You must also attend Officer Training. There may be exceptions to the degree requirements based on extensive service experience. Additional qualifications include:
U.S. Citizen between the ages of 18 and 41
Currently licensed and practicing nursing in the U.S. (new graduates must obtain a license within one year of beginning Active Duty service)
In good standing (as a student or graduate) with a CCNE-accredited U.S. education program granting a Bachelor of Science degree
Willing to serve a minimum of three years Active Duty
In good physical condition and able to pass a full medical examination
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
When serving part-time as a Navy Reserve Nurse, your duties are carried out during your scheduled drilling and training periods. During monthly drilling, Nurse Corps Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, you may serve anywhere in the world, including locations in the U.S., at bases overseas, or in areas where humanitarian needs are great.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Nurses in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET):
Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
For current or former Officers of military branches other than the Navy (OSVET), as well as for Officer candidates without prior military experience:
Officer Candidates are required to attend Officer Development School (ODS) in Newport, RI. ODS is a five-week program that provides a comprehensive and intense introduction to the responsibilities of Navy Staff Corps Officers. Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
With flexible training options, Nurses in the Navy Reserve can comfortably balance civilian and military schedules. Additionally, professional nurses who choose to serve as Reserve Sailors in the Navy Nurse Corps may qualify for special offers. Depending on your specialty, you may qualify for an accession bonus or specialty pay.
Compare Navy Careers
See how a career as a Navy Nurse compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
Not Specified
Restaurant Delivery - Flexible Schedule
🏢 Doordash
Salary not disclosed
Why Deliver with DoorDash?
DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Whether you’re looking for a side hustle or a full-time gig, delivering with DoorDash gives you the opportunity to earn extra cash on your terms.
Multiple ways to earn: Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time.
Total flexibility: Dash when it works for you. Set your own hours and work as much—or as little—as you want.
Know how much you'll make: Clear and concise pay model lets you know the minimum amount you will make before accepting any offer.
Instant cash flow: Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting.
Quick and easy start: Sign up in minutes and get on the road fast.**
Simple Process: Just pick up, drop off, and cash out. Payday is in your back pocket.
Basic Requirements
18+ years old*** (21+ to deliver alcohol)
Any car, scooter, or bicycle (in select cities)
Driver's license number
Social security number (only in the US)
Consistent access to a smartphone
How to Sign Up
Click “Sign UpApply Now” and complete the sign up process
Download the DoorDash Dasher app and go
*Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank.
**Subject to eligibility..
***Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia
Additional information
Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.
Remote working/work at home options are available for this role.
DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Whether you’re looking for a side hustle or a full-time gig, delivering with DoorDash gives you the opportunity to earn extra cash on your terms.
Multiple ways to earn: Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time.
Total flexibility: Dash when it works for you. Set your own hours and work as much—or as little—as you want.
Know how much you'll make: Clear and concise pay model lets you know the minimum amount you will make before accepting any offer.
Instant cash flow: Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting.
Quick and easy start: Sign up in minutes and get on the road fast.**
Simple Process: Just pick up, drop off, and cash out. Payday is in your back pocket.
Basic Requirements
18+ years old*** (21+ to deliver alcohol)
Any car, scooter, or bicycle (in select cities)
Driver's license number
Social security number (only in the US)
Consistent access to a smartphone
How to Sign Up
Click “Sign UpApply Now” and complete the sign up process
Download the DoorDash Dasher app and go
*Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank.
**Subject to eligibility..
***Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia
Additional information
Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.
Remote working/work at home options are available for this role.
Not Specified
Delivery Driver - Sign Up in Minutes
🏢 Doordash
Salary not disclosed
Why Deliver with DoorDash?
DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Whether you’re looking for a side hustle or a full-time gig, delivering with DoorDash gives you the opportunity to earn extra cash on your terms.
Multiple ways to earn: Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time.
Total flexibility: Dash when it works for you. Set your own hours and work as much—or as little—as you want.
Know how much you'll make: Clear and concise pay model lets you know the minimum amount you will make before accepting any offer.
Instant cash flow: Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting.
Quick and easy start: Sign up in minutes and get on the road fast.**
Simple Process: Just pick up, drop off, and cash out. Payday is in your back pocket.
Basic Requirements
18+ years old*** (21+ to deliver alcohol)
Any car, scooter, or bicycle (in select cities)
Driver's license number
Social security number (only in the US)
Consistent access to a smartphone
How to Sign Up
Click “Sign UpApply Now” and complete the sign up process
Download the DoorDash Dasher app and go
*Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank.
**Subject to eligibility..
***Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia
Additional information
Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.
DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Whether you’re looking for a side hustle or a full-time gig, delivering with DoorDash gives you the opportunity to earn extra cash on your terms.
Multiple ways to earn: Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time.
Total flexibility: Dash when it works for you. Set your own hours and work as much—or as little—as you want.
Know how much you'll make: Clear and concise pay model lets you know the minimum amount you will make before accepting any offer.
Instant cash flow: Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting.
Quick and easy start: Sign up in minutes and get on the road fast.**
Simple Process: Just pick up, drop off, and cash out. Payday is in your back pocket.
Basic Requirements
18+ years old*** (21+ to deliver alcohol)
Any car, scooter, or bicycle (in select cities)
Driver's license number
Social security number (only in the US)
Consistent access to a smartphone
How to Sign Up
Click “Sign UpApply Now” and complete the sign up process
Download the DoorDash Dasher app and go
*Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank.
**Subject to eligibility..
***Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia
Additional information
Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.
Not Specified
Delivery Driver - No Experience Needed
🏢 Doordash
Salary not disclosed
Why Deliver with DoorDash?
DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Whether you’re looking for a side hustle or a full-time gig, delivering with DoorDash gives you the opportunity to earn extra cash on your terms.
Multiple ways to earn: Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time.
Total flexibility: Dash when it works for you. Set your own hours and work as much—or as little—as you want.
Know how much you'll make: Clear and concise pay model lets you know the minimum amount you will make before accepting any offer.
Instant cash flow: Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting.
Quick and easy start: Sign up in minutes and get on the road fast.**
Simple Process: Just pick up, drop off, and cash out. Payday is in your back pocket.
Basic Requirements
18+ years old*** (21+ to deliver alcohol)
Any car, scooter, or bicycle (in select cities)
Driver's license number
Social security number (only in the US)
Consistent access to a smartphone
How to Sign Up
Click “Sign UpApply Now” and complete the sign up process
Download the DoorDash Dasher app and go
*Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank.
**Subject to eligibility..
***Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia
Additional information
Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.
DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you. Whether you’re looking for a side hustle or a full-time gig, delivering with DoorDash gives you the opportunity to earn extra cash on your terms.
Multiple ways to earn: Whether you’re delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time.
Total flexibility: Dash when it works for you. Set your own hours and work as much—or as little—as you want.
Know how much you'll make: Clear and concise pay model lets you know the minimum amount you will make before accepting any offer.
Instant cash flow: Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting.
Quick and easy start: Sign up in minutes and get on the road fast.**
Simple Process: Just pick up, drop off, and cash out. Payday is in your back pocket.
Basic Requirements
18+ years old*** (21+ to deliver alcohol)
Any car, scooter, or bicycle (in select cities)
Driver's license number
Social security number (only in the US)
Consistent access to a smartphone
How to Sign Up
Click “Sign UpApply Now” and complete the sign up process
Download the DoorDash Dasher app and go
*Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa® Debit Card is issued by Starion Bank.
**Subject to eligibility..
***Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia
Additional information
Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.
permanent
SMT Principal Engineer - Opportunities for Leadership and Innovation (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
temporary
Master Planner - Lead a dynamic team in optimizing production efficiency. (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
Manage all planning activities for the dedicated assigned workcell and mentor the Production Planners and Document Coordinators in the workcell.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Ensure 100% on-time delivery.
- Establish build readiness.
- Maintain efficiency of capacity and customer sizing.
- Maintain accurate revenue forecasting.
- Maintain material control and liability.
- Develop Master Production Schedule (MPS) and load into Jabil’s ERP system, including Purchase Order (PO) coverage.
- Reconcile the MPS to customer PO coverage weekly to ensure that Jabil is not exposed over and above customer PO coverage or other authorized customer demand.
- Ensure the MPS is always 100% accurate and achievable.
- Achieve and maintain 95% MPS goal.
- Own production planning, BOM and document control with or without additional support.
- Analyze material and capacity requirements and communicate constraints to the Workcell and customer based on accurate customer demand.
- Maintain the workcell’s capacity planning model; drive resolution on uneven capacity utilization that keeps Jabil focused on the customer but efficiently utilizing manufacturing resources.
- Meet daily with the Workcell and manufacturing team to assess production schedules, (adjust as necessary based on production results) optimize run quantities, and minimize changeovers to help achieve 100% on time delivery.
- Maintain the customers’ latest contract on file at all times and be familiar with the terms and conditions of the contract regarding customer liability of material planning and production scheduling. This includes the liability window for Jabil material purchase order placement, purchase price for components, and liability for any in-house materials (purchased and manufactured).
- Be the workcell’s “expert” on all planning activities by supporting the Production Planner goal of never starting to build product without having a valid PO, adequate material quantities, and accurate BOM and an accurate routing.
- Lead the Workcell on the creation of Bills of Material (BOMs) and routings that allows accurate tracking of WIP assemblies and accurate inventory movement transactions.
- End-of Life (EOL) management should include chairing a meeting 30 days prior to the last planned build date to create tactics to support the EOL strategy. The Master Planner would own the build schedule, corrections and resolution of MPS to customer demand, planned tactics on deadlines for assemblies out of the various work areas on the floor, deadline for last shipment, and support plan for potential RMAs.
- Manage Jabil purge process for internal Workcell purges.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
EDUCATION & EXPERIENCE REQUIREMENTS
- Bachelor’s degree + 5 years of experience, or Masters + 3 years of related experience, or PhD without experience.
- APICS certification and Supervisor experience also preferred.
- Thorough knowledge of MRP, lead times for specific component types, internal run rates, test development lead times, machine programming lead times and complete understanding of the chronological sequence of events that must occur in order to build a product.
- Or an equivalent combination of education, training, or experience.
Manage all planning activities for the dedicated assigned workcell and mentor the Production Planners and Document Coordinators in the workcell.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Ensure 100% on-time delivery.
- Establish build readiness.
- Maintain efficiency of capacity and customer sizing.
- Maintain accurate revenue forecasting.
- Maintain material control and liability.
- Develop Master Production Schedule (MPS) and load into Jabil’s ERP system, including Purchase Order (PO) coverage.
- Reconcile the MPS to customer PO coverage weekly to ensure that Jabil is not exposed over and above customer PO coverage or other authorized customer demand.
- Ensure the MPS is always 100% accurate and achievable.
- Achieve and maintain 95% MPS goal.
- Own production planning, BOM and document control with or without additional support.
- Analyze material and capacity requirements and communicate constraints to the Workcell and customer based on accurate customer demand.
- Maintain the workcell’s capacity planning model; drive resolution on uneven capacity utilization that keeps Jabil focused on the customer but efficiently utilizing manufacturing resources.
- Meet daily with the Workcell and manufacturing team to assess production schedules, (adjust as necessary based on production results) optimize run quantities, and minimize changeovers to help achieve 100% on time delivery.
- Maintain the customers’ latest contract on file at all times and be familiar with the terms and conditions of the contract regarding customer liability of material planning and production scheduling. This includes the liability window for Jabil material purchase order placement, purchase price for components, and liability for any in-house materials (purchased and manufactured).
- Be the workcell’s “expert” on all planning activities by supporting the Production Planner goal of never starting to build product without having a valid PO, adequate material quantities, and accurate BOM and an accurate routing.
- Lead the Workcell on the creation of Bills of Material (BOMs) and routings that allows accurate tracking of WIP assemblies and accurate inventory movement transactions.
- End-of Life (EOL) management should include chairing a meeting 30 days prior to the last planned build date to create tactics to support the EOL strategy. The Master Planner would own the build schedule, corrections and resolution of MPS to customer demand, planned tactics on deadlines for assemblies out of the various work areas on the floor, deadline for last shipment, and support plan for potential RMAs.
- Manage Jabil purge process for internal Workcell purges.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
EDUCATION & EXPERIENCE REQUIREMENTS
- Bachelor’s degree + 5 years of experience, or Masters + 3 years of related experience, or PhD without experience.
- APICS certification and Supervisor experience also preferred.
- Thorough knowledge of MRP, lead times for specific component types, internal run rates, test development lead times, machine programming lead times and complete understanding of the chronological sequence of events that must occur in order to build a product.
- Or an equivalent combination of education, training, or experience.
temporary
Advanced Testing Technician (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Provides input for colleague’s performance appraisals
· Assists Test Engineers when commissioning new test equipment.
· Provides technical assistance to other technicians on the same shift.
· Provides line support to manufacturing for all test processes.
· Ensures “machine down” calls are responded to in a timely manner.
· Liaises with manufacturing to determine repair priorities.
· Ensures adequate spares are available for all allocated equipment.
· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.
· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.
· Escalates to Test Engineers any unresolved/ongoing issues.
· Instructs operators on safe/effective use of test equipment.
· Provides daily report of all line issues.
· Provides weekly/quarterly downtime reports for allocated equipment.
· Sources spares from the most cost effective supplier.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Provides input for colleague’s performance appraisals
· Assists Test Engineers when commissioning new test equipment.
· Provides technical assistance to other technicians on the same shift.
· Provides line support to manufacturing for all test processes.
· Ensures “machine down” calls are responded to in a timely manner.
· Liaises with manufacturing to determine repair priorities.
· Ensures adequate spares are available for all allocated equipment.
· Ensures Preventative Maintenance is carried out at specified intervals on all allocated equipment.
· Liaises with manufacturing to ensure Preventative Maintenance does not impact production schedule.
· Escalates to Test Engineers any unresolved/ongoing issues.
· Instructs operators on safe/effective use of test equipment.
· Provides daily report of all line issues.
· Provides weekly/quarterly downtime reports for allocated equipment.
· Sources spares from the most cost effective supplier.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Second Shift: Monday - Friday 3:00 p.m. - 11:30 p.m.
temporary
SMT Equipment Specialist (Afternoon Shift) (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Maintenance Technician is responsible for ensuring the optimal performance and preventative maintenance of Surface Mount Technology (SMT) equipment during second shift hours, minimizing downtime and supporting continuous production.
Job Responsibilities
- Perform preventative maintenance, troubleshooting, and repair of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Diagnose and resolve complex electro-mechanical, pneumatic, and software issues on SMT production lines.
- Execute scheduled maintenance tasks according to established procedures and manufacturer specifications.
- Respond promptly to equipment breakdowns and production line interruptions, providing timely and effective solutions to restore functionality.
- Utilize schematics, diagrams, and technical manuals to guide repair and maintenance activities.
- Collaborate with production operators and engineers to identify recurring issues and implement corrective actions.
- Document all maintenance activities, repairs, and parts used accurately in the maintenance management system.
- Support equipment setup, calibration, and changeovers for various product builds.
- Identify opportunities for process improvement and contribute to the development of maintenance best practices.
- Adhere to all safety protocols and quality standards, including ESD procedures.
Job Qualifications
- Associate's degree in Electronics Technology, Mechatronics, or a related technical field, or equivalent relevant experience.
- Minimum of 3-5 years of experience in maintenance and repair of SMT manufacturing equipment.
- Strong understanding of SMT processes, equipment operation, and common failure modes.
- Proficiency in troubleshooting electrical, mechanical, pneumatic, and control systems.
- Ability to read and interpret schematics, blueprints, and technical manuals.
- Experience with various SMT equipment brands (e.g., Fuji, Mydata, ASM, Panasonic) preferred.
- Familiarity with preventive maintenance programs and computerized maintenance management systems (CMMS).
- Strong problem-solving skills and attention to detail.
- Ability to work independently on the night shift and as part of a team.
- Excellent communication skills, both written and verbal.
- Ability to lift up to 50 pounds and stand for extended periods.
- Flexibility to work overtime as needed.
The SMT Maintenance Technician is responsible for ensuring the optimal performance and preventative maintenance of Surface Mount Technology (SMT) equipment during second shift hours, minimizing downtime and supporting continuous production.
Job Responsibilities
- Perform preventative maintenance, troubleshooting, and repair of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Diagnose and resolve complex electro-mechanical, pneumatic, and software issues on SMT production lines.
- Execute scheduled maintenance tasks according to established procedures and manufacturer specifications.
- Respond promptly to equipment breakdowns and production line interruptions, providing timely and effective solutions to restore functionality.
- Utilize schematics, diagrams, and technical manuals to guide repair and maintenance activities.
- Collaborate with production operators and engineers to identify recurring issues and implement corrective actions.
- Document all maintenance activities, repairs, and parts used accurately in the maintenance management system.
- Support equipment setup, calibration, and changeovers for various product builds.
- Identify opportunities for process improvement and contribute to the development of maintenance best practices.
- Adhere to all safety protocols and quality standards, including ESD procedures.
Job Qualifications
- Associate's degree in Electronics Technology, Mechatronics, or a related technical field, or equivalent relevant experience.
- Minimum of 3-5 years of experience in maintenance and repair of SMT manufacturing equipment.
- Strong understanding of SMT processes, equipment operation, and common failure modes.
- Proficiency in troubleshooting electrical, mechanical, pneumatic, and control systems.
- Ability to read and interpret schematics, blueprints, and technical manuals.
- Experience with various SMT equipment brands (e.g., Fuji, Mydata, ASM, Panasonic) preferred.
- Familiarity with preventive maintenance programs and computerized maintenance management systems (CMMS).
- Strong problem-solving skills and attention to detail.
- Ability to work independently on the night shift and as part of a team.
- Excellent communication skills, both written and verbal.
- Ability to lift up to 50 pounds and stand for extended periods.
- Flexibility to work overtime as needed.
temporary
SMT Maintenance Technician (2nd Shift - 3-11pm M-F) (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Maintenance Technician is responsible for ensuring the optimal performance and preventative maintenance of Surface Mount Technology (SMT) equipment during second shift hours, minimizing downtime and supporting continuous production.
Job Responsibilities
- Perform preventative maintenance, troubleshooting, and repair of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Diagnose and resolve complex electro-mechanical, pneumatic, and software issues on SMT production lines.
- Execute scheduled maintenance tasks according to established procedures and manufacturer specifications.
- Respond promptly to equipment breakdowns and production line interruptions, providing timely and effective solutions to restore functionality.
- Utilize schematics, diagrams, and technical manuals to guide repair and maintenance activities.
- Collaborate with production operators and engineers to identify recurring issues and implement corrective actions.
- Document all maintenance activities, repairs, and parts used accurately in the maintenance management system.
- Support equipment setup, calibration, and changeovers for various product builds.
- Identify opportunities for process improvement and contribute to the development of maintenance best practices.
- Adhere to all safety protocols and quality standards, including ESD procedures.
Job Qualifications
- Associate's degree in Electronics Technology, Mechatronics, or a related technical field, or equivalent relevant experience.
- Minimum of 3-5 years of experience in maintenance and repair of SMT manufacturing equipment.
- Strong understanding of SMT processes, equipment operation, and common failure modes.
- Proficiency in troubleshooting electrical, mechanical, pneumatic, and control systems.
- Ability to read and interpret schematics, blueprints, and technical manuals.
- Experience with various SMT equipment brands (e.g., Fuji, Mydata, ASM, Panasonic) preferred.
- Familiarity with preventive maintenance programs and computerized maintenance management systems (CMMS).
- Strong problem-solving skills and attention to detail.
- Ability to work independently on the night shift and as part of a team.
- Excellent communication skills, both written and verbal.
- Ability to lift up to 50 pounds and stand for extended periods.
- Flexibility to work overtime as needed.
The SMT Maintenance Technician is responsible for ensuring the optimal performance and preventative maintenance of Surface Mount Technology (SMT) equipment during second shift hours, minimizing downtime and supporting continuous production.
Job Responsibilities
- Perform preventative maintenance, troubleshooting, and repair of SMT equipment including pick-and-place machines, reflow ovens, screen printers, and automated optical inspection (AOI) systems.
- Diagnose and resolve complex electro-mechanical, pneumatic, and software issues on SMT production lines.
- Execute scheduled maintenance tasks according to established procedures and manufacturer specifications.
- Respond promptly to equipment breakdowns and production line interruptions, providing timely and effective solutions to restore functionality.
- Utilize schematics, diagrams, and technical manuals to guide repair and maintenance activities.
- Collaborate with production operators and engineers to identify recurring issues and implement corrective actions.
- Document all maintenance activities, repairs, and parts used accurately in the maintenance management system.
- Support equipment setup, calibration, and changeovers for various product builds.
- Identify opportunities for process improvement and contribute to the development of maintenance best practices.
- Adhere to all safety protocols and quality standards, including ESD procedures.
Job Qualifications
- Associate's degree in Electronics Technology, Mechatronics, or a related technical field, or equivalent relevant experience.
- Minimum of 3-5 years of experience in maintenance and repair of SMT manufacturing equipment.
- Strong understanding of SMT processes, equipment operation, and common failure modes.
- Proficiency in troubleshooting electrical, mechanical, pneumatic, and control systems.
- Ability to read and interpret schematics, blueprints, and technical manuals.
- Experience with various SMT equipment brands (e.g., Fuji, Mydata, ASM, Panasonic) preferred.
- Familiarity with preventive maintenance programs and computerized maintenance management systems (CMMS).
- Strong problem-solving skills and attention to detail.
- Ability to work independently on the night shift and as part of a team.
- Excellent communication skills, both written and verbal.
- Ability to lift up to 50 pounds and stand for extended periods.
- Flexibility to work overtime as needed.
temporary
Test Engineering Tech II - Collaborative Cross-Functional Team Environment (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
temporary
Manufacturing Test Technician II (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
temporary
Test Engineering Tech II (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
temporary
Test Solutions Specialist (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Third Shift
Monday - Friday 11:00 p.m. - 7:00 .
temporary
SMT Principal Engineer (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
temporary
Surface Mount Process Development Expert (RICHARDSON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Summary
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
The SMT Principal Engineer I at Jabil, Inc. is a senior technical contributor responsible for leading advanced surface mount technology (SMT) process development, optimization, and continuous improvement initiatives across multiple manufacturing lines to ensure high-quality and efficient production of complex electronic assemblies.
Job Responsibilities
- Lead the development, implementation, and optimization of SMT processes, including paste printing, pick-and-place FUJI, reflow soldering, and post-reflow inspection (AOI, X-ray).
- Conduct in-depth analysis of SMT process data, identifying root causes of defects and implementing effective corrective and preventive actions.
- Develop and qualify new SMT equipment, materials, and processes, ensuring seamless integration into existing production environments.
- Provide expert technical guidance and mentorship to junior engineers and production teams on SMT best practices, troubleshooting, and process control.
- Collaborate with design engineering, supply chain, and quality departments to ensure manufacturability (DFM) of new products and resolve SMT-related design issues.
- Drive continuous improvement projects utilizing methodologies such as Six Sigma, Lean Manufacturing, and SPC to enhance SMT yield, throughput, and reliability.
- Author and maintain comprehensive SMT process documentation, including work instructions, process specifications, and failure analysis reports.
- Evaluate and implement new SMT technologies and industry trends to maintain Jabil's competitive edge and address evolving product requirements.
- Lead efforts in root cause analysis for complex SMT failures, implementing robust solutions to prevent recurrence.
- Represent Jabil in technical discussions with customers and suppliers regarding SMT process capabilities and new product introductions.
Job Qualifications
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field. Master's degree preferred.
- 8-12 years of progressive experience in SMT process engineering within a high-volume electronics manufacturing environment.
- Strong Knowledge of FUJI Setup, Nexim and Valor
- Demonstrated expertise in SMT equipment operation, programming, and maintenance, including printers, pick-and-place machines (e.g., Fuji, Programming, etc.), reflow ovens, and inspection systems (AOI, SPI, X-ray).
- In-depth knowledge of various soldering technologies, solder paste chemistries, and component packaging.
- Proven track record of leading process improvement projects and achieving significant yield and cost reductions.
- Strong analytical and problem-solving skills with a data-driven approach to decision-making (e.g., SPC, DOE).
- Excellent communication, interpersonal, and presentation skills, with the ability to effectively collaborate with cross-functional teams and external stakeholders.
- Proficiency in statistical analysis software (e.g., Minitab, JMP) and CAD software for DFM analysis.
- Familiarity with industry standards such as IPC-A-610 and J-STD-001.
- Ability to work independently and manage multiple complex projects simultaneously.
temporary
jobs by
