Engineering Jobs in Frisco Remote

Date Posted:

2026-02-27

Country:

United States of America

Location:

US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon’s RF & Microelectronics Center is responsible for full-scope Independent Design, Verification & Validation (IV&V) solutions for microwave products, including architecture trades, design, layout, development, integration, deployment, and sustainment of antenna systems and associated integrated system verification solutions. Within the RF & Microelectronics Center, the Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.

Join our Airborne Antenna Design Department as an RF Design Engineer II and be at the forefront of cutting-edge technology with the opportunity to make a significant impact. This role offers not only recognition but also a clear path for growth and development within our organization. If you're passionate about shaping the future of aerospace and defense, this is your chance to thrive in a dynamic and rewarding environment!

What You Will Do

• Design, develop, and sustain state-of-the-art Transmit/Receive (T/R) microwave products (modules, TRIMMs, planar arrays, etc).

• Implement best practice standards with regard to the planning, coordination, and implementation of microwave design and test with sound engineering process discipline and leadership.

• Interface with factory, program, and customer personnel to implement design improvements.

• Support factory troubleshooting, analyze product defect trends, and implement process/product improvements in alignment with factory and program production needs.

• This 1st shift role will be 100% on-site and based in McKinney, TX.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience.

• Experience with transmit/receive functions covering large frequency range (MHz thru Ka-band).  

• Experience with data analysis using MATLAB.

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• MS in Electrical Engineering is a PLUS.

• RF/Microwave Design Verification Test (DVT) experience with network/spectrum analyzers and/or antenna measurement systems.

• Experience using Keysight ADS and Mentor Graphics Xpedition design software.

• Experience with PWB and CCA processes for hybrid designs incorporating digital, power, and RF circuitry.

• Experience with engineering RF requirements development and verification.

• Experience interfacing with technical engineers production personnel and presenting to upper-level management.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-27

Country:

United States of America

Location:

US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Senior Data Manager identifies all data deliverables made part of a contract and subsequently builds a data track in a Product Data Management (PDM) system. The DM identifies, with help from the Program Office, the appropriate preparers, receive the data within PDM, reviews the data for compliance, solicits and secures appropriate programmatic approval and delivers the information to the customer on time, throughout the lifecycle of the contract.

In addition, DMs are responsible for reviewing sub-tier contractor requirements, building data tracks for supplier submissions, receiving data from various suppliers, and routing for approval and/or incorporation into prime contractor deliverables to the customer as well as securing non-deliverable program work products to be configuration controlled in the PDM system and other related tasking.

This position is in McKinney Texas

What You Will Do

• Reading contracts for understanding of the deliverables
• Working in a PDM system to capture, manage, and track data deliverables and/or receivables
• Coordinating with cross-functional teams to obtain requested data
• Proofreading data for compliance to the requirement(s)
• Managing the data deliverable schedule and providing the data to the customer on-time
• Learning and understanding contractually required markings applied to data
• Running forecast reports and providing them to the appropriate stakeholders
• Providing metrics related to on-time deliveries and outstanding dispositions upon request
• Reviewing and approving sub-tier supplier statements of work for data requirements
• Supporting program meetings and providing training to program personnel and customers and/or suppliers
• Handling and protection of Company Intellectual Property (IP) as well as U.S. government IP and classified information

Qualifications you must have

• Bachelor’s degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years prior relevant experience OR a related Associate’s degree and 4 years of relevant experience OR in absence of a degree, 6 years of relevant experience
• Minimum of 2 years’ experience related to data management and/or equivalent professional experience
• Minimum of 2 years’ experience in a customer support/service role 

Qualifications We Value

• Knowledge of U.S. government defense contracts
• Knowledge of U.S. government specifications and instructions such as the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS), Data Item Descriptions (DIDs), Department of Defense (DoD) Instruction 5230.24 Distribution Statements on Technical Documents, National Industrial Security Program Operating Manual (NISPOM) (DoD 5220.22-M)
• Collaborate in a team environment
• Self-motivated and detail oriented
• Proven excellent oral and written communication and presentation skills
• Excellent proofreading skills

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
  • Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-27

Country:

United States of America

Location:

US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

The Advanced Airborne RF Sensors department within the Space and Airborne Systems Engineering and Test Capability (SE&TC) Center is seeking a Systems Engineer to join our team in North Texas. As a Systems Engineer, you will play a critical role in the integration, testing, and verification of advanced hardware and software systems. You will ensure our products meet customer requirements and perform to expectations, from initial development through deployment and post-deployment support. This dynamic role offers the opportunity to collaborate across disciplines, solve complex challenges, and contribute to cutting-edge aerospace and defense technologies. This is an Onsite role in McKinney, TX.

What You Will Do:

• Collaborate with hardware and software teams to develop test procedures and
• troubleshoot system level issues for RF and EW systems.
• Perform calibration and operation of phased array antennas within a laboratory test‑range environment.
• Support testing, validation, and integration activities for phased array antenna systems, RF sensor, and EW systems.
• Conduct modeling, simulation, and analysis to evaluate ES/EA system performance and inform design decisions.
• Create and execute test plans and procedures, evaluate system functions and interfaces, and verify system requirements in preparation for final system sell-off to the customer.
• Support production, system deployment, and post-deployment activities, ensuring product performance and reliability.
• Collaborate across hardware and software disciplines to identify and implement solutions to complex system challenges.
• Engage in Digital Transformation (DTx) efforts, leveraging methods and enabling technologies such as Model-Based Systems Engineering (MBSE) and Agile product development practices.
• Work alongside teams of engineers to support integration and testing efforts, ensuring seamless functionality of system components.
• Utilize laboratory equipment, including power supplies, oscilloscopes, and digital voltmeters.
• Test event support activity may require travel which is not expected to exceed 20%. 

Qualifications You Must Have:

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of EW/Radar systems design and requirements engineering experience.
• Diagnose and resolve electromagnetic interference (EMI) issues.
• Modeling and simulation for Electronic Warfare (EW) or radar systems.
• Experience with calibrating, operating, and supporting the integration of phased‑array or RF sensor systems.

Qualifications We Prefer

• Active DoD clearance with investigation within five years.
• Advanced degree in Science, Technology, Engineering or Mathematics (STEM preferred).
• Model Based Systems Engineering (Cameo Enterprise Architecture (SysML specifically), digital thread concepts, digital engineering, MBSE with DevSecOps).
• Antenna design and calibration experience
• Skilled in diagnosing and resolving electromagnetic interference (EMI) issues.
• Experience with modeling and simulation of EW or radar systems.
• Matlab/Simulink, DOORS, DNG, Cameo, Jira, and Confluence.

What We Offer:

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligible – relocation assistance available for this position 

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.
• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• McKinney, Texas: Raytheon North Texas Location

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-11

Country:

United States of America

Location:

US-TX-RICHARDSON-C17 ~ 1717 Cityline Dr ~ CITYLINE C17

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​

Security Clearance Type:

TS/SCI without Polygraph

Security Clearance Status:

Active and existing security clearance required on day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Raytheon is hiring a Data Modeler Database Engineer  to support our team in Richardson TX.  You will have the opportunity to directly impact the world around you and contribute to classified programs and technologies you are passionate about. In this position you would be familiar with designing, creating, updating, and managing databases and high performance data models.

What You Will Do

• Identify and understand customer needs and apply sound, demonstrable understanding of database principles, theories, and concepts related to software engineering to translate those needs to viable design solutions.
• Translate needs and design requirements into physical data models.
• Analyze business requirements, RFCs, and technical specifications to identify data modeling impacts and design needs.
• Collaborate with systems engineers, product owners, architects, and stakeholders to gather and validate data requirements.
• Design new database structures (tables, indexes, constraints, views) and modify existing models to accommodate program needs.
• Author and implement database data model changes (DDL) using database change control automation.
• Work with developers on best practices for interacting with databases, writing and maintaining SQL statements.
• Utilize data modeling tools such as Oracle SQL Developer Data Modeler, Oracle Designer, and others.
• Demonstrate critical thinking skills with the ability to communicate concepts and ideas clearly.
• Use proven problem solving and analytical skills.
• Work in an Agile/Scrum environment.
• Able to obtain and maintain SCI program access and complete polygraphs.
• Obtain Security+ certification within 60 days of start.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of five (5) years of Database Engineering experience.
• Three (3) years of experience performing relational data modeling with Oracle or PostgreSQL Relational Database Management Systems (RDBMS).
• Three (3) years of experience with Oracle SQL and PL/SQL.
• Experience with bash shell scripting.
• Experience working with Systems and Software Engineers to design, implement, and modify backend databases to interact with applications.
• Experience and Linux command line skills to perform database administration activities, deployment automation.
• Active and transferable Top Secret U.S. government issued security clearance is required prior to start date with the ability to obtain a TS/SCI prior to start date. U.S. Citizenship is required as only U.S. Citizens are eligible for a clearance.

Qualifications We Prefer

• Three (3) years of experience with PostgreSQL SQL and pl/pgsql.
• Experience with python scripting and programming.
• Existing Security+ Certification (or higher).
• Experience using AWS RDS for Oracle and AWS Aurora PostgreSQL database services.
• Experience with NoSQL database products such as MongoDB and DynamoDB.
• Data architecture experience for critical design decisions (such as the suitability of a product/technology for a given use case).  
• Experience troubleshooting database performance issues.
• Strong SQL tuning experience in Oracle and PostgreSQL.
• Experience with database security controls and audit & compliance requirements.
• Experience virtualizing or containerizing databases.
• Experience with automating routine tasks.
• Experience using git source control, Jira, and Confluence.

What We Offer

• Whether you’re just starting out on your career journey or are an experienced professional, we offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance, and child/adult backup care.

• Relocation Eligibility - Relocation assistance is available.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

• North Texas: Are RTX

#LI-Onsite

#LI-HS30

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-03-09

Country:

United States of America

Location:

US-TX-RICHARDSON-C27 ~ 1727 Cityline Dr ~ CITYLINE C27

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

TS/SCI without Polygraph

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

"We have an exciting opportunity for a Principal Platform Product Owner to support one of our premier programs. In this role, you will collaborate with a cross-disciplinary team of platform engineers and systems administrators, driving innovation in ground systems solutions.".

In this critical role, you will lead the implementation and advancement of DevOps practices, ensuring the seamless integration of cutting-edge tools, cloud technologies, and processes within our program. You will collaborate with a cross-disciplinary team to drive innovation and efficiency in our development, security, and operations functions.

Note This position will be filled onsite at an RTX Facility in Richardson TX.

What You Will Do

• Serve as Product Owner for the team, owning the backlog, prioritizing work, and ensuring alignment with program objectives and delivery commitments
• Work with the Scrum Master to plan and execute Agile meetings, including sprint planning and Program Increment (PI) execution, to deliver high-quality, cloud-enabled capabilities on schedule
• Coordinate delivery and selloff of completed work to customers, ensuring technical acceptance and stakeholder satisfaction
• Develop and maintain a technical roadmap that keeps the platform aligned with modern DevOps practices, cloud-native architecture, and relevant COTS solutions
• Evaluate emerging technologies, cloud services, and industry trends to continuously improve platform capabilities, security posture, and team effectiveness

Qualifications You Must Have

• Typically requires BS/BA Degree in Science, Technology Engineering Math (STEM) in Computer Science, Computer Engineering, Information Technology or Physics and a minimum 8 years of related work experience
• Experience with the installation, configuration, and maintenance of RedHat Linux operating systems
• Experience with infrastructure automation and configuration management tools such as Terraform, Ansible, and/or Chef
• Experience with CI/CD concepts and toolchains (e.g., Jira, Confluence, Jenkins, GitLab, Artifactory, Helm) from a user and integrator perspective
• Ability to obtain DOD TS/SCI security clearance is required after day 1. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Strong working knowledge in infrastructure of servers, networking, storage, and virtualization technologies in enterprise or mission environments
• Effective communication, with the ability to convey complex technical concepts to engineers, customers, and senior leadership
• Advanced experience troubleshooting performance, reliability, and availability issues across Linux-based platforms and infrastructure services
• Working knowledge of scripting languages such as Python and/or Bash used for automation and operational workflows
• Experience designing and delivering solutions within a DevOps framework, including security integration throughout the software lifecycle
• Strong AWS experience, including architecture, deployment, and security of services such as EC2, EKS, S3, CloudWatch, IAM, and VPC, with an emphasis on scalability and cost optimization
• Container and platform engineering experience using Kubernetes and container runtimes such as Docker or Podman
• Working knowledge of integrating CI/CD pipelines and toolchains to support application teams
• Experience integrating and supporting COTS and FOSS products in secure or regulated environments
• DoD 8570 IAT Level II compliance (e.g., Security+ CE or equivalent)

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role
• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products

This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  : Richardson, TX

• We Are RTX

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-27

Country:

United States of America

Location:

US-TX-MCKINNEY-513WZ ~ 2501 W University Dr ~ WING Z BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon’s RF & Microelectronics Center is responsible for full-scope Independent Design, Verification & Validation (IV&V) solutions for microwave products, including architecture trades, design, layout, development, integration, deployment, and sustainment of antenna systems and associated integrated system verification solutions. Within the RF & Microelectronics Center, the Airborne Antenna Design Department is a team of engineers responsible for electrical design and development of RF products within Raytheon. Our charter is to provide expertise in sub-systems engineering, RF and radome design, digital apertures, antenna ranges and module test.

Join our Airborne Antenna Design Department as an RF Design Engineer II and be at the forefront of cutting-edge technology with the opportunity to make a significant impact. This role offers not only recognition but also a clear path for growth and development within our organization. If you're passionate about shaping the future of aerospace and defense, this is your chance to thrive in a dynamic and rewarding environment!

What You Will Do

• Design, develop, and sustain state-of-the-art Transmit/Receive (T/R) microwave products (modules, TRIMMs, planar arrays, etc).

• Implement best practice standards with regard to the planning, coordination, and implementation of microwave design and test with sound engineering process discipline and leadership.

• Interface with factory, program, and customer personnel to implement design improvements.

• Support factory troubleshooting, analyze product defect trends, and implement process/product improvements in alignment with factory and program production needs.

• This 1st shift role will be 100% on-site and based in McKinney, TX.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior work experience.

• Experience with and/or relevant coursework on transmit/receive functions covering large frequency range (MHz thru Ka-band).  

• Experience with data analysis using MATLAB.

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• MS in Electrical Engineering is a PLUS.

• RF/Microwave Design Verification Test (DVT) experience with network/spectrum analyzers and/or antenna measurement systems.

• Experience using Keysight ADS and Mentor Graphics Xpedition design software.

• Experience with PWB and CCA processes for hybrid designs incorporating digital, power, and RF circuitry.

• Experience with engineering RF requirements development and verification.

• Experience interfacing with technical engineers production personnel and presenting to upper-level management.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-26

Country:

United States of America

Location:

US-TX-MCKINNEY-513WC ~ 2501 W University Dr ~ WING C BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

Job Description:

The Advanced Radar Products Department empowers people to deliver innovative, affordable and producible products and technologies to support airborne Radar solutions throughout the full product lifecycle while remaining accountable for program execution cost, schedule, and performance. We provide best in industry technologies that align product capabilities to the needs of our customers and end- users. As an Electrical Engineer II supporting production, you will be part of a team of highly talented engineers that work on highly complex Radar products and test sets. You will be working as a member of a production support team and under the guidance of an Integrated Product Team (IPT) Lead in McKinney, Texas.

What You Will Do:

• Managing component obsolescence identification and mitigation
• Troubleshooting test sets down to component level to include analog and digital interfaces, etc. Includes software
• Troubleshooting hardware and process issues down to circuit card assembly (CCA)/Module and component levels to include analog/digital/RF/power circuitry and interfaces.
• Work in a team environment to ensure the production and sustainment timelines are maintained.
• Analysis of test data of products to make sure test specifications are met.
• Reading and interpreting and applying engineering drawings, including assembly drawings, parts lists, wire lists, and schematics.
• This position requires daily on-site support and is not open to remote work possibilities

Qualifications You Must Have:

• Typically requires a Bachelor's Degree in Science, Technology, Engineering or Mathematics.
• A minimum 2 years of prior relevant experience with electronics and electrical circuits as well as ability to isolate failures to root cause.
• Experience reading & interpreting drawings and electrical schematics
• Experience with lab equipment such as multimeters, signal sources, oscilloscopes, spectrum analyzers, and logic analyzers
• Experience working on a production program
• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer:

• Experience with supplier engagement
• Experience with documenting test results and engineering recommendations clearly and concisely
• Excellent interpersonal and communication skills
• Experience with Mentor Graphics, Matlab, or PSPICE
• Ability to work in a team environment and communicate with leadership and colleagues.

What We Offer:

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2025-10-13

Country:

United States of America

Location:

TX190: 2501 West University, McKinney 2501 West University , McKinney, TX, 75070 USA

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​

Security Clearance:

Secret - Current

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world. 

Raytheon is an industry leader in Stealth Technology. We are involved in all phases of design, development, production, and maintenance of Low Observable (LO) antenna and Active Electronically Scanned Arrays (AESA) systems. We are currently looking for Stealth / Low Observable / Radar Cross Section (RCS) / Signature Management / Survivability Engineers to work on challenging, state-of-the-art technical projects.

Raytheon’s Apertures and RF Department is seeking a Principal Antenna Design Engineer to join the Radome & Apertures team in McKinney, Texas. 

The candidate will support state-of-the-art ultra-wideband phased array antennas, individual antennas, and RF Low Observables (LO) within the Company. The selected candidate will work with various teams of engineers and scientists with backgrounds in AESAs, Antennas, Radomes, Computational Electromagnetics Modeling (CEM), RF Test, Mechanical, Structural and Thermal analysis, Material Science, Process and Manufacturing Engineering and survivable antenna technology.

The ideal candidate for this role will enjoy both theoretical design and hands-on engineering tasks. If you are looking for an opportunity to grow with a leader in the Defense Industry, this is the perfect opportunity for you! This position requires job duties to be performed onsite due to the sensitive nature of this work and the desire for in-person collaboration, however we offer flexible in-office hours and the ability to perform some job duties remotely.

What You Will Do

• Responsible for the hands-on design and realization of LO antennas, phased array antennas and passive RF components.

• Use computational electromagnetic analysis software to design and predict performance on various types of antennas and apertures (spiral, sinuous, Vivaldi, patch, slot, horn, ultra-wideband tightly coupled dipole arrays, etc.).

• Exhibit exceptionally high level of innovation, creativity, and initiative.

• Support customer programs through modeling and simulation of LO antennas or RF components/systems and leading teams that perform these functions.

• Provide technical solutions to a wide range of difficult problems involving antenna/sensor-based applications such as radar, electronic warfare, electronic attack, electronic support measures, communications, geolocation, direction finding, etc.

• Establish and maintain effective working relationships with internal and external customers. Represent the organization in providing solutions to difficult technical issues associated with specific projects.

• Mentor and guide more junior engineers and technicians in the design, build, and test phases of projects and programs.

• Work with interdisciplinary engineering teams including thermal, structural, mechanical, systems, etc.

• Participate in and guide the testing of RF hardware for required performance metrics: VSWR, insertion loss, gain, polarization, RCS.

• This 1st shift role will be 100% on-site and based in McKinney, TX.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior work experience, or an Advanced Degree in a related field and minimum 5 years’ experience.

• Engineering experience to include any combination of the following:

  • Radar Cross Section (RCS) reduction, prediction, measurement, and analysis & simulation.

  • Design, fabrication, and test of conformal antennas, apertures, and passive RF components (i.e. radiating elements, radomes, power dividers, couplers, transitions, multi-layer board designs, Frequency Selective Surfaces (FSSs), etc.).

  • Designing, fabricating, and testing ultra-wideband phased array antennas such as Tightly Couple Dipole Arrays (TCDA), Vivaldi, Sliced Notch, Planar Ultra-wideband Modular Arrays (PUMA).

• Experience with RCS analysis tools such as X-Patch, SENTRi, FEKO, HFSS, CST or other company specific CEM analysis packages.

• Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Master’s or PhD in Electrical Engineering with a concentration in Electromagnetics.

• Experience presenting technical data to peers, executives and customers.

• Experience writing and leading technical proposals.

• Experience winning new business and executing contract research and development (CRAD) programs.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• This position offers relocation based on candidate eligibility.

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: Information: North Texas - part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

  The salary range for this role is 101,000 USD - 203,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

  RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

  Privacy Policy and Terms:

  Click on this link to read the Policy and Terms

Date Posted:

2026-03-09

Country:

United States of America

Location:

US-TX-RICHARDSON-C27 ~ 1727 Cityline Dr ~ CITYLINE C27

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

TS/SCI without Polygraph

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression.  We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.  Our team solves tough, meaningful problems that create a safer, more secure world.

Raytheon Technologies (RTX) is seeking a Principal Platform Engineer with well-rounded Linux Infrastructure Engineering expertise to join an agile product team. The Ideal candidate will have experience in both traditional infrastructure design; provisioning of platform, storage, and networking resources for existing on-premises infrastructure that ideally also has experience in emerging DevOps/DevSecOps & Modernized technologies. The Principal Platform Engineer would be engaged in the design and implementation of the system updates and upgrades with Focus on the Linux Server / Linux OS expertise and will support Technical Exchange Meetings (TEMs) and provide project status as required.

The Principal Platform Engineer would be involved with development, implementation of traditional compute/network/storage systems and related deployments, as well as support improving the program platform’s over-arching design through new emerging technologies. This includes existing operating systems and existing server hardware designs, as well as supporting the design and development of new modernized system architectures through Automation tools.

Note This position will be filled onsite at an RTX Facility in Richardson TX.

What You Will Do

• You will leverage company and industry with the best practices and capabilities to develop and communicate implementation, of infrastructure solutions
• You will maintain existing systems through Linux Based Tools and manage the COTS stack on the system to support program needs
• You will Utilize various scripting and Automation tools to develop and maintain the program’s infrastructure
• You will ensure that the COTS stack and versioning is consistent across the platform; and will work with the team to make updates as necessary

Qualifications You Must Have

• Typically requires BS/BA Degree in Science, Technology Engineering Math (STEM) in Computer Science, Computer Engineering, Information Technology or Physics and a minimum 8 years of related work experience
• Experience with Scripting skills: Bash, Python, Java, Perl, Ruby, Tcl/Tk
• Experience with markup languages: YML, XML, JSON
• Experience with MS Office suite: Word, Excel, PowerPoint, Visio
• Ability to obtain a TS/SCI issued security clearance is required after day 1. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Familiar with container orchestration: Kubernetes, Docker, Podman, Helm, Rancher
• Familiar with Lightweight Directory Access Protocol (LDAP)
• Familiar with Information Technology Service Management tools: ServiceNow, Atlassian (Jira, Confluence)
• Familiar with Agile project management, Scrum methodology
• A Background in Systems Operations or Engineering; supporting large complex Information Technology environment
• Experience with automation tools: Ansible, Terraform, Jenkins, Bitbucket
• Hands on Experience with Linux Operating System
• Experience with software deployment and integration
• A Current Poly Is strongly desired for this role to get Privilege User access to systems

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role
• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products

This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  : Richardson, TX

• We Are RTX

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

2026-02-06

Country:

United States of America

Location:

US-TX-MCKINNEY-513WC ~ 2501 W University Dr ~ WING C BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required on day 1

RTX Corporation is an Aerospace and Defense company that provides advanced systems and services for commercial, military and government customers worldwide. It comprises three industry-leading businesses – Collins Aerospace Systems, Pratt & Whitney, and Raytheon. Its 185,000 employees enable the company to operate at the edge of known science as they imagine and deliver solutions that push the boundaries in quantum physics, electric propulsion, directed energy, hypersonics, avionics and cybersecurity. The company, formed in 2020 through the combination of Raytheon Company and the United Technologies Corporation aerospace businesses, is headquartered in Arlington, VA.

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

We have an exciting opportunity for a Senior Software Engineer – Embedded to join our Electro-Optical & Infrared (EO/IR) Solutions Engineering Team in McKinney, TX, which is part of our Advanced Products & Solutions group.

The Advanced Product and Solutions organization at RTX provides the joint warfighter with actionable information from an unblinking eye across the battlespace. By joining the APS Engineering team you’ll have the opportunity to design, develop and test product capabilities for Active Electronically Scanned Array (AESA) radars, integrated sensor suites, precision targeting, multispectral EO/IR targeting systems, Pilot Situational Awareness, Special mission aircraft and Strategic and tactical ISR Systems.

But more than anything, we are innovators, creators and strategists drawing inspiration from each other every day. We collaborate, iterate, and execute with an eye toward the company mission and personal career growth.

Explore our opportunities today and join us!

What You Will Do

• Supports all aspects of a software development life cycle as members of a multi-disciplined team. This would include supporting new and legacy military and commercial programs from concept and requirements, to design, development, integration, test, and potentially subsequent maintenance tasking.

• Uses and provides creative solutions to complex technical system and software integration problems.

• Works closely with Systems Engineers to design ideal solutions with the end user and operational needs in mind.

• The ability to obtain and maintain a Secret U.S. government issued security clearance and a Special Access Program security clearance. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

• Work onsite at McKinney, TX [relocation eligible]

• This position will require occasional business-related travel.

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience unless prohibited by local laws/regulations.

• Development experience on Linux, VxWorks, or other Real Time Operating Systems.

• Experience using object-oriented programming and C++ design paradigms.

• Experience in developing, testing, and integrating real-time software applications written in C++.

• Additional experience in coding using C, C#, Java or closely related software languages.

• Working knowledge in computer scripting language such as Shell/Perl/Python.

• Experience working with multi-discipline team(s).

• Active and transferable U.S. government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Experience working in lab environments with physical hardware (e.g., test benches, simulators).

• Ability to quickly understand and navigate complex systems and established code bases.

• Experience with product development utilizing the Scrum techniques of the Agile software development process.

• Experience with DevSecOps pipeline implementation and utilization, including Static Code Analysis, Automated Build, and Automated Test techniques using continuous integration/continuous delivery with Test-Driven Development approach.

• Hands-on experience with Git for version control and GitLab for repository management.

• Ability to manage multiple priorities.

• Experienced in developing in CUDA to accelerate compute-intensive workloads on Nvidia GPUs.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, Innovation, and Safety.

Learn More & Apply Now!

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Clearance Information: This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Title:  Principal Electrical Design Engineer

Job Family: Electrical Design Engineering

Organization : Data Center Infrastructure Team

Location:  Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

• Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
• Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
• Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
• Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
• Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
• Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
• Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
• Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
• Drive the development of system-level simulations and digital twins to validate control strategies before deployment
• Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
• Establish design patterns and best practices for modular and reusable control logic across projects
• Lead root cause analysis and resolution of complex control system issues during commissioning and operations
• Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
• Develop and maintain documentation for system architecture, control logic, and operational procedures
• Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
• Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
• Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
• Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education : 

• Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience :  

• 8+ years pf experience in control system design and implementation
• Deep expertise in the following:
  • PLC programming (Allen-Bradley, Siemens, Schneider Electric)
  • Building Management Systems (BMS) integration and optimization
  • Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
  • Automatic Transfer Switches (ATS) control and failover logic
• Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
• Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
• Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills
• Creative, self-motivated, accountable, and team-oriented
• Able to work independently with minimal oversight as part of a global team
• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
• Skilled in writing reports, business correspondence, and procedural guides
• Effective at presenting information and responding to management, clients, and public queries
• Capable of influencing others and sharing best practices while mentoring less experienced engineers
• Capable of assessing projects, articulating risks, and developing project milestones
• Familiar with stage-gate processes in project lifecycle management (PLCM)
• Excellent problem-solving skills and attention to detail
• Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
• Experience with hyperscale or colocation data center environments
• Familiarity with low and medium-voltage systems

Preferred Qualifications:  

• Master’s Degree in Electrical Engineering or a relevant engineering discipline
• Active Professional Engineer (PE) license
• Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
• Experience with digital twin modeling and predictive maintenance strategies.

Remote working/work at home options are available for this role.

Job Title: Principal Electrical Controls Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.

- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.

- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.

- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.

- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.

- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.

- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.

- Drive the development of system-level simulations and digital twins to validate control strategies before deployment

- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools

- Establish design patterns and best practices for modular and reusable control logic across projects

- Lead root cause analysis and resolution of complex control system issues during commissioning and operations

- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency

- Develop and maintain documentation for system architecture, control logic, and operational procedures

- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure

- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints

- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines

- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation

- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)

- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)

- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight as part of a global team

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices while mentoring less experienced engineers

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Excellent problem-solving skills and attention to detail

- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus

- Experience with hyperscale or colocation data center environments

- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline

- Active Professional Engineer (PE) license

- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.

- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.

Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.

**This position supports hybrid work schedule depending on organization needs.**

How will you make an impact?

We are looking for a Principal Thermal Rack Engineer within the Intelligent Infrastructure Segment to drive advanced cooling solutions for high-performance computing systems. This role involves incorporating thermal components such as direct liquid cooling (DLC) systems, coolant distribution units (CDUs), and manifolds into network and server racks (EIA 19” and ORv3). You will leverage CFD tools to perform rack and system-level thermal and fluid analysis, ensuring optimal flow distribution, pressure drop, and temperature performance. Additionally, you will create 3D CAD designs for seamless hardware integration, lead validation testing, and resolve thermal or flow issues through root cause analysis and corrective actions. Collaboration with cross-functional teams, customers, and global vendors is essential to align thermal architectures with overall system design and international standards.

What will you do?

- Lead the end-to-end integration and testing of rack thermal solutions, including liquid cooling systems in varying form factors and product lines.
- Use CFD tools (FloTherm or Macroflow) to perform switch, rack, and system-level thermal/fluid analysis (flow distribution, pressure drop, and temperature profiling).
- Design and optimize thermal components using 3D CAD (Creo or SolidWorks) to support seamless hardware integration and testing.
- Participate in customer engagements and site visits to understand and document deployment constraints and gather feedback for design improvements.
- Partner with factory teams to ensure racks are built with proper airflow, hose routing, and thermal safeguards, while establishing best practices that improve build consistency across deployments.
- Collaborate with Architects/Compliance/Reliability and global vendors to align thermal architectures with total system design and international data center/thermal/mechanical standards (e.g., UL, OCP, ASHRAE, ISTA, ASTM, NEBS).
- Conduct thermal, mechanical, and reliability testing, analyzing airflow, coolant flow rates, pressure drops, and structural integrity to ensure compliance with the end-users’ specifications.
- Develop and maintain design documentation including BOMs, wetted materials compliance, test plans, and engineering change orders (ECOs).
- Manage relationships with mechanical/thermal component vendors to build out a robust partner ecosystem consisting of racks, CDUs, hoses, manifolds, QDs, and cold plates.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (e.g., in-row cooling, in-rack cooling, rear door heat exchangers).
- Conduct root cause analysis and corrective actions for mechanical and thermal failures or field issues.
- May perform other duties and responsibilities as assigned.

How will you get here?

Education:

- Bachelor’s Degree in Mechanical/Thermal Engineering, Systems Engineering, or related field is required

Experience:

- Minimum of 7+ years of experience in thermal/mechanical systems integration
- 3+ years of specific experience in rack-scale thermal design and analysis
- Strong understanding of mechanical systems, integration strategies, and large-scale program management
- Familiarity with server design, heatsinks, cold plates, hoses, and blind-mate connectors
- Proficiency in CFD simulation (e.g. ANSYS, 6Sigma, etc.) and 3D modeling software (e.g. SolidWorks, Creo)
- Hands-on experience with thermal chambers, fans, and coolant
- Excellent English communication skills (verbal and written) with strong technical leadership capabilities

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Capable of assessing projects, articulating risks, and developing project milestones
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management and customers
- Capable of influencing others and sharing best practices
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering, Systems Engineering or related field is preferred
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license preferred.
- Hands-on experience with prototype fabrication and testing; experience working with global suppliers and contract manufacturers a plus.

About Jabil’s Intelligent Infrastructure Group:

- Headquartered in Austin, TX, with a flagship facility located near The Domain and the Austin FC stadium
- Growing rapidly, with a team of more than 100 employees in Austin (500+ worldwide) and significant expansion planned through 2026
- Generated over $12 billion in FY25 revenue, driven largely by partnerships with major hyperscale customers
- Delivers cutting‑edge engineering, supply chain, and manufacturing solutions that power the world's AI infrastructure and global data center ecosystems

As part of the total rewards package, this position is eligible for:

- Annual bonus opportunity
- Medical, dental, and vision insurance plans
- Paid time off (PTO)
- 4 weeks of paid parental leave
- 11 company-paid holidays (9 fixed holidays and 2 optional floating holidays), subject to change yearly
- 401(k) retirement plan
- Employee stock purchase plan
Remote working/work at home options are available for this role.

Job Title: Lead Electrical CAD Designer

Job Family: General Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.

What will you do?

- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed

- Participating in design reviews to ensure accuracy and compliance with requirements

- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control

- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards

- Work closely with engineers and other designers to meet product specifications and performance requirements

- Modify and revise designs to correct operating deficiencies or to reduce production problems

- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.

- Check and validate designs to ensure they meet required quality and safety standards

- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications

- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications

- Designing and creating schematic PLC input/output connections.

- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.

- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team

- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration

- Capable of creating a Bill of Materials (BOM) for release to manufacturing

- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers

- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs

- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required

Experience:

- 6-8 years of experience in electrical design within the power distribution or data center industry.

- Proven experience as a CAD designer, preferably in an electrical engineering environment.

- Proficiency in CAD software (AutoCAD Electrical, Revit).

- Strong understanding of electrical systems, integration strategy, and system coordination

- Excellent problem-solving skills and attention to detail

- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently

Knowledge, Skills, Abilities:

- Strong knowledge of electrical design, manufacturing processes, and material properties.

- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.

- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.

- Excellent interpersonal and communication skills.

- Creative, self-motivated, accountable, and team-oriented.

- Able to work independently with minimal oversight.

- Effective at presenting information and responding to management, clients, and public queries.

- Capable of influencing others and sharing best practices.

- Comfortable working as part of a global team.

- Capable of assessing projects, articulating risks, and developing project milestones.

- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.

Job Title: Principal Electrical Design Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.

Job Title: Principal Electrical Controls Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.

- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.

- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.

- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.

- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.

- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.

- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.

- Drive the development of system-level simulations and digital twins to validate control strategies before deployment

- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools

- Establish design patterns and best practices for modular and reusable control logic across projects

- Lead root cause analysis and resolution of complex control system issues during commissioning and operations

- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency

- Develop and maintain documentation for system architecture, control logic, and operational procedures

- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure

- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints

- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines

- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation

- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)

- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)

- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight as part of a global team

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices while mentoring less experienced engineers

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Excellent problem-solving skills and attention to detail

- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus

- Experience with hyperscale or colocation data center environments

- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline

- Active Professional Engineer (PE) license

- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.

- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.

Job Title: Principal Electrical Controls Engineer

Job Family: Electrical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.

This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.

What will you do?

- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.

- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.

- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.

- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.

- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.

- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.

- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.

- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.

- Drive the development of system-level simulations and digital twins to validate control strategies before deployment

- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools

- Establish design patterns and best practices for modular and reusable control logic across projects

- Lead root cause analysis and resolution of complex control system issues during commissioning and operations

- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency

- Develop and maintain documentation for system architecture, control logic, and operational procedures

- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure

- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints

- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines

- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems

How will you get here?

Education:

- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.

Experience:

- 8+ years pf experience in control system design and implementation

- Deep expertise in the following:

- PLC programming (Allen-Bradley, Siemens, Schneider Electric)

- Building Management Systems (BMS) integration and optimization

- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics

- Automatic Transfer Switches (ATS) control and failover logic

- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)

- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)

- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight as part of a global team

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices while mentoring less experienced engineers

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Excellent problem-solving skills and attention to detail

- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus

- Experience with hyperscale or colocation data center environments

- Familiarity with low and medium-voltage systems

Preferred Qualifications: 

- Master’s Degree in Electrical Engineering or a relevant engineering discipline

- Active Professional Engineer (PE) license

- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.

- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.

Principal Mechanical Integration Engineer
Mechanical Design Engineering 
Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)

The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.

This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.

Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.

Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.

8 years' experience in mechanical design and integration of mission-critical systems.
~ Proven track record of successful system designs and implementations in a relevant industry
~ Strong understanding of mechanical systems, integration strategy, and system coordination
~ Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
~ Master’s Degree in Mechanical Engineering
~
Remote working/work at home options are available for this role.

Job Title: Principal Mechanical Design Engineer

Job Family: Mechanical Design Engineering

Organization: Data Center Infrastructure Team

Location: Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

- Lead mechanical design reviews and contribute to cross-functional design validation efforts.

- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

- Conduct root cause analysis and corrective actions for mechanical failures or field issues.

- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

- May perform other duties and responsibilities as assigned

How will you get here?

Education:

- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience:

- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

- Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

- Excellent interpersonal and communication skills

- Creative, self-motivated, accountable, and team-oriented

- Able to work independently with minimal oversight

- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

- Skilled in writing reports, business correspondence, and procedural guides

- Effective at presenting information and responding to management, clients, and public queries

- Capable of influencing others and sharing best practices

- Comfortable working as part of a global team

- Capable of assessing projects, articulating risks, and developing project milestones

- Familiar with stage-gate processes in project lifecycle management (PLCM)

- Able to mentor less experienced engineers

- Ability to travel both domestically and internationally up to 30%

Preferred Qualifications: 

- Master’s Degree in Mechanical Engineering

- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

- Active Professional Engineer (PE) license.

- Knowledge of regulatory and safety standards applicable to data center infrastructure.

- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.