Engineering Jobs in Fl Remote
131 positions found — Page 3
Description
At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.Northrop Grumman Aeronautics Systems has an opening for a Staff Human Factors Engineer to join our team of qualified, diverse individuals. This position is located in Melbourne, Florida.
The Human Systems Integration team is seeking a Human Factors Engineer (HFE) to join the E-2D Hawkeye team. In this position, the new team member will be part of the team ensuring the evolving aircraft hardware and software systems are operable by US military flight and maintenance crews. This position requires a strong background in Systems Engineering. Job responsibilities include requirements development; design documentation including interface specifications; software interface design/development support; analyses and collaboration to facilitate equipment selection, design and arrangement; collaboration and working groups; compliance with specified sections of MIL-STD-1472; collaboration across IPTs; and coordination with the customer and user community.
Typical Duties:
• Author/support the program documentation of the HFE processes and products in a format consistent with Department of Defense (DoD) Data Item Descriptions (DIDs) for example, Human Engineering Program Plan, Human Engineering Design Approach Document – Operator, Human Engineering Design Approach Document – Maintainer, Human Engineering Test Plan, Human Engineering Test Report, et al.
• Author/support the development of requirements that are compliant with Human Factors best practices and specified sections of MIL-STD-1472G
• Human Factors Analyses (including but not limited to: Task Analyses and Predictive Workload Analyses
• Architecture, CONOPS, and use case development using model-based systems engineering methodologies
• Perform functional analysis, timeline analysis, detailed trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.
• Prepare, coordinate and conduct both predictive and empirical workload analyses as well as usability assessments.
• Collaboration with Design Integrated Product Teams (IPTs) to ensure evolving design addresses program needs and adheres to Human Interface design requirements
• Support / Lead Highly Immersive Virtual Environment (HIVE) motion-capture human modeling analyses
Basic Qualifications:
• Bachelor of science degree and 12 years of experience in a Human Factors related field; or a Master's degree and 10 years of experience in a related field; or a PhD and 8 years of experience in a related field.
• Must have the ability to obtain and maintain a DoD Secret clearance; interim secret clearance is required to start.
• Must have the ability to obtain and maintain Special Access Program (SAP) clearance.
• Must have experience constructing, conducting, analyzing and reporting Usability, Workload and Situation Awareness Evaluations specific to military aircraft systems and associated operational environments
• Must have experience interpreting, applying, and tailoring MIL-STD-1472, MIL-STD-411, MIL-STD-1787, MIL-STD-3009, and MIL-STD-46855 in support of aircraft design activity.
Preferred Qualifications:
• Active Secret or Top Secret DoD security clearance
• Aircraft Maintenance Certifications
• Flight Crew Certifications
• Experience authoring, evolving, decomposing, and verifying requirements from system-level through software implementation-level
• Experience conducting structured trade studies
• Experience with attack aircraft, airborne surveillance, battle management and command and control
• Experience with DOORS, MBSE and CANVAS modeling tools
• Experience with requirements database development, management, maintenance experience (DOORS), Trade Studies analysis/development
• Experience with the interpretation and application of systems safety, personnel survivability, and habitability requirements to system design
• Integration & test experience
• NX Human Modeling and NX Jack Expertise
• Proficiency in system modeling tools (i.e., CORE, Rhapsody, PTC Integrity Modeler, Cameo)
• Proficiency with user interface software prototyping tools
• Significant experience with Systems Engineering processes
• Understand systems and design thinking as well as HMI/HCI design principles and practices
Primary Level Salary Range: $152,900.00 - $229,300.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.SMB Account Executive
Clearwater, FL - Hybrid | 4 days onsite
OTE - $100,000 to $120,000 (50/50 split)
Are you a driven, high-energy sales professional who thrives on closing new business and exceeding quota?
We’re partnering with a global, high-growth cybersecurity SaaS business that is transforming how organisations manage human risk and security awareness. With tens of thousands of customers worldwide and a market-leading, AI-powered platform, this organisation is helping businesses turn their employees into their strongest line of defence against cyber threats.
This is an opportunity to join a company that dominates its niche, continues to innovate at pace, and offers real earning potential and career progression.
The Role | SMB Account Executive
As an Account Executive, you’ll own the full sales cycle for small to mid-sized organisations (25–500 employees), driving both net-new business and the reactivation of lapsed accounts.
You’ll be responsible for building a pipeline, closing deals, and consistently exceeding monthly targets in a fast-paced, performance-driven environment.
What You’ll Be Doing
- Driving new business across your assigned territory
- Identifying and closing net new logos
- Re-engaging dormant accounts and uncovering new opportunities
- Building and managing a strong, consistent sales pipeline
- Conducting outbound prospecting (calls, email, networking, demos)
- Articulating a clear and compelling value proposition around security awareness and human risk management
- Forecasting accurately and managing your territory strategically
- Following up on marketing-qualified leads to convert opportunities
- Negotiating pricing within established guidelines
- Maintaining accurate CRM records (Salesforce)
- This is a metrics-driven role, high activity, high visibility, high reward.
What They’re Looking For
- 1–3 years of software sales experience (SMB experience preferred)
- Proven track record of hitting or exceeding quota
- Confidence with outbound prospecting and cold calling
- Familiarity with IT security concepts is advantageous
- Experience using Salesforce and Google Workspace
- Highly motivated, energetic self-starter
- Strong communication skills (written and verbal)
- Comfortable working independently while contributing to a collaborative team environment
- Bachelor’s degree preferred
- Security+ or Network+ certifications are a bonus, but not essential.
Why Join?
- Join a global leader in a red-hot cybersecurity segment
- AI-driven, best-in-class product suite
- Huge market demand and strong brand credibility
- Clear earning potential (OTE up to $120k)
- Career progression in a scaling organisation
- Supportive, high-performance culture
If you’re competitive, commercially sharp, and ready to accelerate your sales career within a booming SaaS security business, this could be your next big move.
Research indicates that men will apply to a role when they only meet 50-60% of the descriptions, however, when looking at women and other minority groups, they can look for up to a 99% match in order to apply to a role. If you feel you are a fit for our role, please still apply, don’t worry if you don’t tick every single box. We’d still love to hear from you. We encourage underrepresented talent to apply to all our roles & support accessibility needs
Production Test Technician (Level 3)
Orlando, FL | On-Site $70,000–$80,000 per year | Full-Time
Why This Role
RF test technicians with real troubleshooting depth are hard to find — and we know it. If you've spent years diagnosing signal issues, wrestling with spectrum analyzers, and bridging the gap between engineering and the production floor, this is a role where that expertise is genuinely valued and well-compensated.
You'll work on RF test equipment in a fast-paced manufacturing environment, collaborating directly with engineering teams and making a visible impact on product quality every day.
What You'll Do
Testing & Validation
- Perform RF testing on newly built RF test equipment per established procedures and standards
- Evaluate performance of RF systems, subsystems, and components against design specifications
- Test and validate RF circuits, assemblies, and interfaces across defined frequency ranges and power levels
Troubleshooting
- Diagnose complex RF performance issues, hardware malfunctions, and system errors
- Analyze test data to identify root causes of performance discrepancies
- Partner with engineering to resolve technical challenges and recommend improvements
Process & Documentation
- Contribute to improving test procedures for greater efficiency and accuracy
- Maintain thorough documentation of test results, calibration procedures, and troubleshooting activities
- Support cross-training of manufacturing team members on lower-level testing procedures
Quality & Collaboration
- Ensure all testing activities meet quality and compliance standards
- Verify equipment performance specs and reliability requirements
- Support failure analysis and corrective action processes
- Provide technical guidance to junior technicians
What We're Looking For
Required
- Associate degree in Electronics Technology, Electrical Engineering, or related field — or equivalent hands-on experience
- 5+ years in RF testing, electronic troubleshooting, or test equipment environments
- Hands-on experience with spectrum analyzers, network analyzers, signal generators, oscilloscopes, and power meters
- Solid understanding of RF measurement concepts: VSWR, gain, phase noise, PIM, and noise figure
- Ability to read and interpret schematics and technical drawings
- Strong problem-solving and communication skills; comfortable working independently
Nice to Have
- Familiarity with RF communication technologies (Bluetooth, Wi-Fi, GPS, cellular)
- Experience with LabVIEW or TestStand
Requirement
- Must be a U.S. Person as defined by applicable export regulations
Based in Orlando, FL
This is an on-site role at our Orlando facility. We're looking for local candidates or those ready to relocate — no remote option for this position.
Salary range: $70,000–$80,000 depending on experience.
Southern States Material Handling is more than just forklifts
We pride ourselves on partnering with our customers to deliver real results that keep their operations running efficiently. Specializing in new & used equipment, operator training, equipment rentals, fleet management, service & repair, automation, and warehouse optimization — Southern States Material Handling solves problems.
As a Regional Warehouse Systems & Automation Manager with Southern States Material Handling, you will lead and grow our Systems & Automation business within the Georgia territory while coaching a regional team, supporting system design projects, and ensuring first-class project execution and customer satisfaction.
Come be a part of our Toyota & Raymond family!
Top of the Line Benefits!!
- 401(k) with company matching
- Dental insurance
- Health insurance
- Vision Insurance
- PTO and Vacation
- Paid Holidays
- Flexible Spending Account
- Life Insurance
- Tuition Reimbursement
What You Need / Basic Qualifications:
- Working knowledge of warehouse systems including racking, mezzanines, shelving, conveyor, and allied equipment
- Strong customer-facing communication, presentation, and relationship-building skills
- Proficient in Microsoft Office products
- Solid AutoCAD knowledge with the ability to read, audit, and approve blueprints
- Familiarity with county and municipal permitting
- Ability to manage multiple projects and deadlines in a fast-paced environment
- Must be willing to travel up to 80% within assigned territory
Education & Experience Needed:
- Bachelor’s degree preferred; High School diploma or equivalent required
- 3–5 years in material handling systems or warehouse solutions sales with a proven track record of growing sales volume
- Experience presenting ROI and profitability to customers
- Experience leading or mentoring others is a plus
What You’ll Do:
- Participate in the sales cycle, teaming with Solutions Consultants to grow Systems & Automation product sales
- Create and design warehouse systems and racking solutions to optimize client operations
- Travel to customer sites for solution presentations and throughout installation to ensure satisfaction
- Work within assigned territory to create and review proposals, contracts, and orders for accuracy
- Ensure content and timeliness of project documentation including drawings, parts lists, and purchase orders
- Provide timely reporting to customers, vendors, and internal leaders
- Lead and support Regional Systems Associates to drive strong performance
- Assist in defining project implementation timelines and ensure on-time delivery
- Read and approve system drawings and blueprints
- Develop and present project estimates and ROI value justification to customers
- Utilize negotiation skills to close deals and retain customer relationships
- Stay current on material handling and warehouse automation trends
- Be an ambassador of our mission, values, and safety-first culture
Schedule: Monday – Friday, 7:00 AM – 4:00 PM
Building Engineer
Job ID
2026-3157
Job Locations
US-FL-Plantation
Department
Engineering
Overview
The Building Engineer reports to the Lead Engineer and maintains a working relationship with and takes direction from all Property Managers in his/her area for issues affecting their properties. Issues may range from tenant improvement work to preventive maintenance and repair of all building systems. This must be done in a manner that not only protects, but also maximizes the value of the property. The Building Engineer must exhibit outstanding client service and professionalism in all interactions with tenants and RMR staff. Teamwork and collaboration are critical to this position's success. The portfolio currently consists of a large single tenant office building and a small mixed-use office building.
Responsibilities
- Operate, maintain, and log all HVAC and MEP equipment under the direction of their supervisor.
- Complete tenant service requests, and develop and maintain positive tenant relations through prompt, courteous response to tenant requests.
- Perform preventive maintenance and repairs on HVAC equipment, plumbing and electrical systems, as directed by their supervisor. Duties include, but are not limited to changing filters, coil cleaning, greasing motors, replacing light bulbs & ballasts, inspecting/adjusting belts, and regular inspections of equipment
- Maintain computerized or manual equipment logs that detail preventive work performed.
- Clean and paint equipment and surrounding areas relating to equipment and equipment rooms.
- Assist in ordering stock and inventory of parts and supplies, as needed.
- Respond immediately to emergency situations and customer concerns.
- Review elevator maintenance records and confirm elevator maintenance is performed per national agreement. Inspect condition of elevator machine rooms. Report any elevator deficiencies to their supervisor.
- Assist with review of tenant improvement plans. Inspect active construction areas and confirm contractors are following all building rules and regulations.Coordinate fire alarm and sprinkler shutdown and drain downs with contractors as needed.
- Coordinate all quarterly fire alarm testing and maintenance with building vendor.
- Maintain and operate life safety/fire systems
- Perform carpentry and snow removal, if necessary.
- Take meter readings on all meters and equipment as directed by their supervisor.
- Perform minor repairs on doors, hardware, lock, windows, ceilings, and floors
- Troubleshoot, evaluate and make recommendations to upgrade maintenance operations and/or implement savings opportunities.
- Possess competent knowledge of the use and care of tools and equipment used in facility and ground maintenance.
- Inspect buildings, grounds and equipment for unsafe or malfunctioning conditions and report to management
- Inspect new installation for compliance with building codes and safety regulations
- Comply with all applicable codes, regulations, governmental agency and company directives, as related to building operations and practice safe work habits
- Daily communication with property management, engineering staff, security, tenants and contractors/vendors is vital.
General Maintenance and Operation Duties:
- Understand OSHA guidelines and how to ensure that all equipment is maintained to guidelines/standards.
- Read and follow written and oral instructions.
- Convey thoughts and recommendations orally and/or in writing to supervisors, contractors and others in order to resolve building-related problems.
- Operate and use necessary manual and power-driven tools.
Qualifications
- High school diploma or GED equivalent required.
- Minimum 3-5 years of building maintenance experience or commensurate experience in a trade (plumbing, electrical, HVAC).
- HVAC or electrical technical school training preferred.
- Applicable military experience or other related operations experience will be considered including power plants, multi-family, hotels, hospitals, facilities, etc.
- Experience with automated building management systems
- Ability to interpret mechanical, electrical blueprints and schematics
- Ability to work in a fast-paced environment, with the ability to multi-task and meet deadlines.
- Must be team oriented and a problem solver.
- Strong verbal and written communication skills.
- Manage own time on a daily basis with little supervision
- Must be able to handle multiple projects, changing priorities, and continually heavy workloads
- May be required to work extended periods of time without relief, when responding to priority/emergency situations (including overtime-type assignments)
- Stooping, standing, climbing and frequent lifting of a minimum of 50 lbs. of equipment (pump, tools, ladders) and ability to safely install rigging/lifting device
- Lift and carry objects of up to 50 lbs. for distances of up to 30 feet
- Climb ladders and stairs.
- Maintain professional appearance and manner at all times while in the complex.
- Will be required to perform off site duties through the use of a personal vehicle.
- Must have a valid driver's license.
- If, at any time, security clearance is required for your job (e.g. you are assigned to work at a property leased by the Federal government), being awarded such clearance will be a condition of your employment.
Total Rewards
The RMR Group offers an extensive total rewards package to ensure that your benefits align with your needs. Employees who work at least 21 hours per week are eligible to participate in The RMR Group's benefits plans, including:
- Health Insurance
- Dental Insurance
- Vision Insurance
- Life & Disability Insurance
- Health Savings Account (HSA) & Flexible Spending Plans (FSA)
- 401(k) Plan with Employer Match
- Holidays, Vacation & Sick Time
- Parental Leave
- Tuition Assistance
- Matching Gift Program
- Wide Array of Voluntary, Employee-Paid Benefits to choose from including Critical Illness & Accident Insurance, Identity Theft Protection & Pet Insurance
Company Overview
The RMR Group (Nasdaq: RMR) is a leading U.S. alternative asset management company, unique for its focus on commercial real estate (CRE) and related businesses. RMR's vertical integration is strengthened by nearly 900 real estate professionals in more than 30 offices nationwide who manage approximately $40 billion in assets under management and leverage more than 35 years of institutional experience in buying, selling, financing and operating CRE. RMR benefits from a scalable platform, a deep and experienced management team and a diversity of real estate strategies across its clients. RMR has been recognized by The Boston Globe as a "Top Place to Work", by the Environmental Protection Agency (EPA) as an "ENERGY STAR Partner of the Year" and ranked by the Building Owners and Managers Association (BOMA) as having one of the highest number of BOMA 360 designated properties in its portfolio. RMR is headquartered in Newton, MA and was founded in 1986.
RMR's mission is to create long term value for our clients by managing their investments and assets "like we own it" - an approach that consistently and repeatedly generates opportunities for all our employees, investors and stakeholders. We are guided by six core values:
- Integrity at Our Core.
- Perform Passionately and Effectively.
- Inspired Thinking.
- Like We Own It.
- Power of We.
- Mutual Respect.
Visit our website to learn more about what makes The RMR Group a rewarding place to build a career.
Follow RMR on LinkedIn and Instagram @thermrgroup.
The RMR Group is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here. If you'd like more information on your EEO rights under the law, please click here.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
ESSENTIAL DUTIES AND RESPONSIBILITIES
· Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.
· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
