Jobs in Faith, NC

About the Company: Innospec Performance Chemicals is looking to add an Electrical, Instrumentation & Controls Technician to the team in Salisbury, NC.

About the Role: The Electrical, Instrumentation & Controls Technician installs, maintains and repairs electrical instrumentation and controls as listed below and maintain cable, heat and exhaust systems in water and wastewater treatment plant as well as manufacturing facilities.

Responsibilities:

• Read, understand and interpret schematics, ladder drawings, technical specifications and manufacture’s manuals related to repair, maintenance and troubleshooting of electrical instrumentation and control equipment.
• Install, maintain, repair and troubleshoot electrical systems including, but not limited to: generators, PLC’s, electric motors, motor controls, flow equipment, alarm and telemetry systems, heating and exhaust systems, conduits, cable and relays.
• Perform preventative maintenance in accordance with established procedures.
• Provide technical guidance to operations and maintenance personnel and provide suggestions to improve service and operations.
• Provide electrical expertise including technical review for in-house modifications, additions and major repairs.
• Contact and work with independent contractors regarding electrical instrumentation and control system repairs and installations.
• Coordinate with Warehouse staff to maintain an inventory of electrical parts and equipment sufficient to perform repairs and complete normal installations.
• Assist in repairs of water and sewer leaks.
• Must be available to work overtime, holidays, weekends, and on-call rotation.
• Other duties may be assigned.

Qualifications:

• This position requires knowledge of installation, maintenance, testing and repair of electrical instrumentation and control equipment and related systems; skill in the techniques of handling tools and equipment used in the electrical trade; and knowledge of safety standards and practices applicable to the repair and maintenance of electrical instrumentation and control equipment and related systems, and to provide corrective measure for resolution of problems.
• The ability to develop work procedures that will provide minimum interference with plant operations.
• The ability to read, interpret and review engineering plans and specifications and to make simple sketches of electrical parts or systems.

Required Skills:

• High School Diploma or equivalent.
• 5+ years of related experience or equivalent education in electrical instrumentation and control system maintenance, installation, and repair.
• Must have pertinent certifications and/or licenses related to job duties.
• Employee is encouraged to continue education through seminars, attend classes, etc. in order to improve knowledge of job-related skills.

Job Type: Full-time

Pay range and compensation package: Starting at $32 per hour (can increase based on experience)

$15,000 Sign-on Bonus! 

Are you a Registered Nurse (RN) looking for a leadership opportunity with a growing organization? We have an exceptional opportunity for an Assistant Director of Nursing (ADON) to join our team at The Laurels of Salisbury.

As Assistant Director of Nursing, you will assist the Director of Nursing and help plan, coordinate and manage the nursing department. You may provide infection prevention management as well.  You will provide orientation and training to new employees.

If you are committed to providing the highest level of care and service to our guests and community, you will love this position with The Laurels of Salisbury.

The Laurels of Salisbury offers one of the leading employee benefit packages in the industry. This includes:

• 
  
• Comprehensive health insurance - medical, dental and vision
  
• 401K with matching funds
  
• DailyPay, a voluntary benefit that allows associates at our facilities the ability to access their pay when they need it.
  
• Paid time off (beginning after six months of employment) and paid holidays
  
• Flexible scheduling
  
• Tuition reimbursement and student loan forgiveness
  
• Free CNA/STNA certification
  
• Zero cost uniforms
  

• 
  
• Legacy,our new virtual community and rewards & recognitions program
  

When you work with Laurel Health Care Company, you will join an experienced, hard-working team that values communication and collaboration.

Responsibilities:

• 
  
• Assure that adequate strategies are in place to verify the current licensure and credentials of nursing employees.
  
• Aid with scheduling and performing guest rounds to monitor and evaluate the quality and suitability of nursing care.
  
• Maintain proper charting and documentation of care and of medications and treatments.
  
• Helps develop and implement the written staffing plan and nursing schedule that reflects the needs of the guest and guest population.
  
• Participates in the budget process of the facility and helps maintain the nursing supply, equipment and nurse staffing budgets.
  
• Maintains current knowledge of applicable managed care, Medicare and state Medicaid regulations, reimbursement systems and methodology.
  
• Aids in assigning responsibilities to associates, taking into consideration guest safety and that duties are commensurate with the educational preparation, experience, knowledge and ability of the persons to whom the duties are assigned.
  

Qualifications for ADON

• 
  
• Registered nurse, RN with management or supervisor experience in long-term care or geriatric nursing. 
  
• Maintains current CPR certification.
  
• Skilled Nursing Facility and LTC experince REQUIRED*
  

Laurel Health Care Company is a national provider of skilled nursing, subacute, rehabilitative, and assisted living services dedicated to achieving the highest standards of care.

We are a national organization of skilled nursing, subacute, rehabilitative, and assisted living providers dedicated to achieving the highest standards of care in five states including Michigan, Ohio, Virginia, North Carolina, and Indiana.

We serve our residents with compassion, concern, and excellence, believing that every one of them is a unique person who deserves our best each day that we care for them. If you have a passion for improving the lives of those around you and working with others who feel the same way.

#IND123

Registered Nurse (RN)

Full Time 7 am - 3 pm Full Time 3 pm - 11 pm

Part Time 7 am - 3 pm Part Time 3pm - 11 pm

Are you a critical thinker, a skilled communicator and passionate about caring for seniors? Are you seeking career advancement? As a Registered Nurse (RN) at The Laurels of Salisbury, you have the opportunity to use your nursing skills and become a leader.

The Laurels of Salisbury offers one of the leading employee benefits packages in the industry. This includes:

• 
  
• Comprehensive health insurance - medical, dental and vision
  
• 401K with matching funds
  
• DailyPay, a voluntary benefit that allows associates at our facilities the ability to access their pay when they need it.
  
• Paid time off (beginning after six months of employment) and paid holidays
  
• Flexible scheduling
  
• Tuition reimbursement and student loan forgiveness
  
• Zero cost uniforms
  

• 
  
• Legacy,our new virtual community and rewards & recognitions program
  

When you work with Laurel Health Care Company, you will join an experienced, hard-working team that values communication and collaboration.

Why just work when you can help shape a legacy?

Responsibilities

The Registered Nurse plans, coordinates, provides and manages nursing care, services and health education to nursing home guests.

• 
  
• Supervise the care/services provided by the LPNs, CNAs/STNAs and other team members who care for guests.
  
• Provide safe and accurate medication-related interventions to guests.
  
• Assess the health of guests and notify the physician of changes in status; promptly implement new orders.
  
• Develop a plan of care based on assessment, implementing nursing care.
  
• Select and institute appropriate nursing interventions to stabilize a guest’s condition and/or prevent complications.
  
• Contribute to guest assessments (MDS/CAA’s) and the development of a plan of care.
  

Qualifications

• 
  
• 1-3 years of experience in a long-term care setting preferred
  
• Current Registered Nurse (RN) licensure in the state
  
• CPR certification
  
  

Laurel Health Care Company is a national provider of skilled nursing, sub-acute, rehabilitative, and assisted living services dedicated to achieving the highest standards of care.

We are a national organization of skilled nursing, subacute, rehabilitative, and assisted living providers dedicated to achieving the highest standards of care in five states including Michigan, Ohio, Virginia, North Carolina, and Indiana.

We serve our residents with compassion, concern, and excellence, believing that every one of them is a unique person who deserves our best each day that we care for them. If you have a passion for improving the lives of those around you and working with others who feel the same way.

#IND123

Licensed Practical Nurse (LPN)

Full Time 7am - 3pm             Full Time 3pm - 11pm

Part Time 7am-3pm              Part Time 3pm - 11pm 

Want to make a difference in someone’s life every day? As a nurse with The Laurels of Salisbury, you will work as part of a team providing skilled nursing and short-term rehabilitation care to our valued guests. If you have patience, compassion, and a desire to care for guests in a gentle and empathetic way, you will love this role.

The Laurels of Salisbury offers one of the leading employee benefits packages in the industry. This includes:

• 
  
• Comprehensive health insurance - medical, dental, and vision
  
• 401K with matching funds
  
• DailyPay, a voluntary benefit that allows associates at our facilities the ability to access their pay when they need it.
  
• Paid time off (beginning after six months of employment) and paid holidays
  
• Flexible scheduling
  
• Tuition reimbursement and student loan forgiveness
  
• Zero cost uniforms
  

• 
  
• Legacy,our new virtual community and rewards & recognitions program
  

When you work with Laurel Health Care Company, you will join an experienced, hard-working team that values communication and collaboration.

Why just work when you can help shape a legacy?

Responsibilities

The Licensed Practical Nurse (LPN) plans, coordinates, provides and manages nursing care services and health education to nursing home guests.

• 
  
• Supervise the care/services provided by Certified Nursing Assistants (CNA)/State-Tested Nursing Assistants (STNA) and other team members who care for guests.
  
• Provide safe and accurate medication-related interventions to guests.
  
• Assess the health of guests and notify the physician of changes in status. Promptly implement new orders.
  
• Select and institute appropriate nursing interventions to stabilize a guest’s condition and/or prevent complications.
  
• Contribute to the guest’s assessment (MDS/CAA’s) and the development of a plan of care.
  

Qualifications

• 
  
• 1-3 years of experience in a long-term care setting preferred
  
• Current Licensed Practical Nurse (LPN) licensure in the state
  
• CPR certification
  

Ciena Healthcare

We are a national organization of skilled nursing, subacute, rehabilitative, and assisted living providers dedicated to achieving the highest standards of care in five states including Michigan, Ohio, Virginia, North Carolina, and Indiana.

We serve our residents with compassion, concern, and excellence, believing that every one of them is a unique person who deserves our best each day that we care for them. If you have a passion for improving the lives of those around you and working with others who feel the same way.

#IND123

PilotCBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demandAPPLY TODAY!

DONT FORGET TO CHECK OUT THE INCENTIVES SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region:Homestead, FL and CAMB:Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations:Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive:New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience:You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours:Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the ""Total flight time"" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the ""day before an individual's 37th birthday"" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service -Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decisionIsabellav.Dept of State,the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training:This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out theAir Interdiction Agent applicant checklistand email it to a recruiter at along with a copy of your resume; OR

• Apply onUSAJOBS;OR

• Apply onAirline Apps.

Stay Updated Opt into CBPs talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. Youll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

• Government & Military

Border Patrol Agent (BPA) Entry Level

NEW RECRUITMENT AND RETENTION INCENTIVES!

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW

The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.

Salary and Benefits

Annual Base Salary for newly appointed BPAs varies per grade, as follows:

GL-5/GL-7 $49,739 - $89,518 per year

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

• Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
• Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
• Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
• Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
• Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

• Make sound judgments and decisions in the use of firearms.
• Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
• Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply:

Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.

If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Border Patrol Agent (BPA) Entry Level

NEW RECRUITMENT AND RETENTION INCENTIVES!

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW

The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.

Salary and Benefits

Annual Base Salary for newly appointed BPAs varies per grade, as follows:

GL-5/GL-7 $49,739 - $89,518 per year

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

• Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
• Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
• Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
• Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
• Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

• Make sound judgments and decisions in the use of firearms.
• Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
• Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply:

Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.

If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Border Patrol Agent (BPA) Entry Level

NEW RECRUITMENT AND RETENTION INCENTIVES!

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW

The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.

Salary and Benefits

Annual Base Salary for newly appointed BPAs varies per grade, as follows:

GL-5/GL-7 $49,739 - $89,518 per year

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

• Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
• Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
• Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
• Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
• Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

• Make sound judgments and decisions in the use of firearms.
• Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
• Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply:

Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.

If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

$15,000 Sign-on Bonus! 

Are you a Registered Nurse (RN) looking for a leadership opportunity with a growing organization? We have an exceptional opportunity for an Assistant Director of Nursing (ADON) to join our team at The Laurels of Salisbury.

As Assistant Director of Nursing, you will assist the Director of Nursing and help plan, coordinate and manage the nursing department. You may provide infection prevention management as well.  You will provide orientation and training to new employees.

If you are committed to providing the highest level of care and service to our guests and community, you will love this position with The Laurels of Salisbury.

The Laurels of Salisbury offers one of the leading employee benefit packages in the industry. This includes:

• 
  
• Comprehensive health insurance - medical, dental and vision
  
• 401K with matching funds
  
• DailyPay, a voluntary benefit that allows associates at our facilities the ability to access their pay when they need it.
  
• Paid time off (beginning after six months of employment) and paid holidays
  
• Flexible scheduling
  
• Tuition reimbursement and student loan forgiveness
  
• Free CNA/STNA certification
  
• Zero cost uniforms
  

• 
  
• Legacy,our new virtual community and rewards & recognitions program
  

When you work with Laurel Health Care Company, you will join an experienced, hard-working team that values communication and collaboration.

Responsibilities:

• 
  
• Assure that adequate strategies are in place to verify the current licensure and credentials of nursing employees.
  
• Aid with scheduling and performing guest rounds to monitor and evaluate the quality and suitability of nursing care.
  
• Maintain proper charting and documentation of care and of medications and treatments.
  
• Helps develop and implement the written staffing plan and nursing schedule that reflects the needs of the guest and guest population.
  
• Participates in the budget process of the facility and helps maintain the nursing supply, equipment and nurse staffing budgets.
  
• Maintains current knowledge of applicable managed care, Medicare and state Medicaid regulations, reimbursement systems and methodology.
  
• Aids in assigning responsibilities to associates, taking into consideration guest safety and that duties are commensurate with the educational preparation, experience, knowledge and ability of the persons to whom the duties are assigned.
  

Qualifications for ADON

• 
  
• Registered nurse, RN with management or supervisor experience in long-term care or geriatric nursing. 
  
• Maintains current CPR certification.
  
• Skilled Nursing Facility and LTC experince REQUIRED*
  

Laurel Health Care Company is a national provider of skilled nursing, subacute, rehabilitative, and assisted living services dedicated to achieving the highest standards of care.

We are a national organization of skilled nursing, subacute, rehabilitative, and assisted living providers dedicated to achieving the highest standards of care in five states including Michigan, Ohio, Virginia, North Carolina, and Indiana.

We serve our residents with compassion, concern, and excellence, believing that every one of them is a unique person who deserves our best each day that we care for them. If you have a passion for improving the lives of those around you and working with others who feel the same way.

#IND123

How will you make an impact?

• Under limited supervision, develops and maintains test procedures, tester hardware, and software for electronic circuit board production.

What will you do ?

• Review circuit board designs for testability requirements.
• Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
• Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
• Generate reports and analysis of test data, prepare documentation and recommendations.
• Review test equipment designs, data, and RMA issues with customers regularly.
• Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
• Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
• Determine conditions under which tests are to be conducted and sequences and phases of test operations.
• Direct and exercise control over operational, functional, and performance phases of tests.
• Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
• Analyze and interpret test data and prepare technical reports for use by test engineering and management personnel.
• Develop or use computer software and hardware to conduct tests on machinery and equipment.
• Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
• May provide training in new procedures for production testing staff.
• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
• Comply and follow all procedures within the company security policy.

How will you get here? 

• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence, and procedure manuals.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.
  
   
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

Physical Demands:

• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs.
• Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

Work Environment:

• The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
• Individual’s primary workstation is in the office area, with some time spent each day on the manufacturing floor.
• The noise level in this environment ranges from low to moderate.

Education:

• Bachelor of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

Experience: 

• Direct L10, L11, and L12 test expertise, strong Linux programming skills, and solid knowledge of GPU/CPU systems, understanding of cloud platforms and driving high-quality testing and technical excellence in a manufacturing test performance floor.

What Can Jabil Offer You? 

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: 

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 

• 401K Match 

• Employee Stock Purchase Plan 

• Paid Time Off 

• Tuition Reimbursement 

• Life, AD&D, and Disability Insurance 

• Commuter Benefits 

• Employee Assistance Program 

• Pet Insurance 

• Adoption Assistance 

• Annual Merit Increases 

• Community Volunteer Opportunities 

How will you make an impact?

• The Sr Manufacturing Engineer at Jabil, Inc. will play a pivotal role in optimizing manufacturing processes, driving continuous improvement, and leading technical projects to ensure efficient production and high-quality output.
• This position requires a strong technical background and leadership skills to guide and mentor a team of engineers.

What will you do?

• Design, develop, and implement robust manufacturing processes for new and existing products, focusing on lean manufacturing principles, automation, and cost reduction.

Technical Leadership & Mentorship:

• Provide technical guidance and leadership to a team of manufacturing engineers, fostering their professional development, and ensuring project execution aligns with company objectives.

Project Management:

• Lead complex manufacturing engineering projects from conception through completion, including planning, resource allocation, budget management, and risk mitigation.

Continuous Improvement:

• Identify and implement opportunities for process improvement, yield enhancement, defect reduction, and waste elimination using methodologies such as Six Sigma and Kaizen.

Tooling & Equipment:

• Evaluate, select, and procure new manufacturing equipment and tooling, ensuring compatibility with production needs and adherence to safety standards.

Documentation & Standardization:

• Develop and maintain comprehensive manufacturing documentation, including work instructions, process flow diagrams, and control plans, to ensure process consistency and repeatability.

Problem Solving:

• Conduct root cause analysis for manufacturing issues, implement corrective and preventive actions, and drive problem resolution across various production lines.

Collaboration:

• Work cross-functionally with R&D, Quality, Supply Chain, and Production teams to ensure seamless product introduction and efficient manufacturing operations.

Safety & Compliance:

• Ensure all manufacturing processes and equipment adhere to internal safety regulations and external industry standards.

How will you get here? 

• Proficiency in process development, optimization, and validation (e.g., FMEA, SPC, MSA).
• Strong understanding of Lean Manufacturing and Six Sigma principles (certification preferred).
• Experience with various manufacturing processes relevant to Jabil's product lines (assembly, tooling, and automation)
• Proficient in CAD software (e.g., SolidWorks, AutoCAD) and simulation tools.
• Experience with ERP/MES systems.

Leadership & Soft Skills:

• Proven leadership and mentorship abilities, with experience guiding and developing engineering teams.
• Excellent problem-solving and analytical skills.
• Effective communication (written and verbal) and interpersonal skills, with the ability to effectively collaborate with diverse teams.
• Demonstrated project management experience, including planning, execution, and monitoring.
• Ability to work independently and manage multiple priorities in a challenging environment.

Education:

• Bachelor’s degree in manufacturing engineering, Mechanical Engineering, Industrial Engineering, or a related technical field
• Master's degree preferred.

Experience:

• 7+ years of progressive experience in manufacturing engineering roles, with at least 2 years in a leadership or senior technical capacity.

What Can Jabil Offer You?

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
• 401K Match
• Employee Stock Purchase Plan
• Paid Time Off
• Tuition Reimbursement
• Life, AD&D, and Disability Insurance
• Commuter Benefits
• Employee Assistance Program
• Pet Insurance
• Adoption Assistance
• Annual Merit Increases
• Community Volunteer Opportunities

How will you make an impact?

• The Sr Manufacturing Engineer at Jabil, Inc. will play a pivotal role in optimizing manufacturing processes, driving continuous improvement, and leading technical projects to ensure efficient production and high-quality output.
• This position requires a strong technical background and leadership skills to guide and mentor a team of engineers.

What will you do?

• Design, develop, and implement robust manufacturing processes for new and existing products, focusing on lean manufacturing principles, automation, and cost reduction.

Technical Leadership & Mentorship:

• Provide technical guidance and leadership to a team of manufacturing engineers, fostering their professional development, and ensuring project execution aligns with company objectives.

Project Management:

• Lead complex manufacturing engineering projects from conception through completion, including planning, resource allocation, budget management, and risk mitigation.

Continuous Improvement:

• Identify and implement opportunities for process improvement, yield enhancement, defect reduction, and waste elimination using methodologies such as Six Sigma and Kaizen.

Tooling & Equipment:

• Evaluate, select, and procure new manufacturing equipment and tooling, ensuring compatibility with production needs and adherence to safety standards.

Documentation & Standardization:

• Develop and maintain comprehensive manufacturing documentation, including work instructions, process flow diagrams, and control plans, to ensure process consistency and repeatability.

Problem Solving:

• Conduct root cause analysis for manufacturing issues, implement corrective and preventive actions, and drive problem resolution across various production lines.

Collaboration:

• Work cross-functionally with R&D, Quality, Supply Chain, and Production teams to ensure seamless product introduction and efficient manufacturing operations.

Safety & Compliance:

• Ensure all manufacturing processes and equipment adhere to internal safety regulations and external industry standards.

How will you get here? 

• Proficiency in process development, optimization, and validation (e.g., FMEA, SPC, MSA).
• Strong understanding of Lean Manufacturing and Six Sigma principles (certification preferred).
• Experience with various manufacturing processes relevant to Jabil's product lines (assembly, tooling, and automation)
• Proficient in CAD software (e.g., SolidWorks, AutoCAD) and simulation tools.
• Experience with ERP/MES systems.

Leadership & Soft Skills:

• Proven leadership and mentorship abilities, with experience guiding and developing engineering teams.
• Excellent problem-solving and analytical skills.
• Effective communication (written and verbal) and interpersonal skills, with the ability to effectively collaborate with diverse teams.
• Demonstrated project management experience, including planning, execution, and monitoring.
• Ability to work independently and manage multiple priorities in a challenging environment.

Education:

• Bachelor’s degree in manufacturing engineering, Mechanical Engineering, Industrial Engineering, or a related technical field
• Master's degree preferred.

Experience:

• 7+ years of progressive experience in manufacturing engineering roles, with at least 2 years in a leadership or senior technical capacity.

What Can Jabil Offer You?

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
• 401K Match
• Employee Stock Purchase Plan
• Paid Time Off
• Tuition Reimbursement
• Life, AD&D, and Disability Insurance
• Commuter Benefits
• Employee Assistance Program
• Pet Insurance
• Adoption Assistance
• Annual Merit Increases
• Community Volunteer Opportunities

How you will make an impact

• We are hiring an NPI Quality Assurance Engineer to lead product and process quality for our cloud operations in Salisbury. In this role, you will manage ISO 9001:2015 systems, develop control plans and quality gates from NPI through ramp, and apply data‑driven methods to prevent defects.

• This is a hands‑on role requiring strong engagement with production lines, manufacturing data, and advanced manufacturing processes for liquid‑cooled servers and racks.

• As the NPI Quality Assurance Engineer, you will ensure products, processes, and systems meet customer, regulatory, and internal standards throughout the full product lifecycle.

What will you do ?

Customer Requirements Review

• Evaluate customer requirements in early phases and ensure compliance, including BOMs, specifications, and incoming quality criteria.

QMS Leadership

• Maintain and improve ISO 9001:2015 processes, work instructions, and records.

• Support internal audits and prepare for external/customer audits.

NPI to Ramp

• Identify CTQs, develop control plans, and complete PFMEAs.

• Perform MSA/GR&R, verify process capability (Cp/Cpk), and conduct FAI for new products.

• Capture and support lessons learned for current and future launches.

Liquid Cooling

• Define and enforce incoming quality criteria for liquid‑cooling assemblies, including pressure‑ and leak‑test limits.

• Maintain leak‑prevention protocols and sensor‑based monitoring.

• Validate coolant fill, purge, filtration, and cleanliness processes.

• Audit cooling and fluid‑handling operations to ensure quality, safety, and reliability.

• Lead CTQ analysis and support PFMEA and control plan development.

• Oversee equipment quality lifecycle, including qualification, calibration, troubleshooting, and upgrades.

In‑Line Quality & Yield

• Implement SPC on critical processes; monitor FPY, DPPM, and escapes.

• Deploy mistake‑proofing and lead containment when process signals drift.

Supplier Quality

• Support definition of incoming inspection criteria for NPI.

• Assist with supplier CTQ identification, material storage processes, and supplier qualifications.

Customer Quality

• Lead 8D/A3 investigations for returns and complaints.

• Drive CAPA implementation and communicate results to customer quality teams.

• Identify gaps and coordinate cross‑functional corrective actions.

Digital Quality

• Automate data flow from MES/ERP systems.

• Develop real‑time dashboards and alerts.

• Use control‑chart behavior to recommend corrective actions.

Documentation & Training

• Publish procedures and one‑point lessons.

• Train operators and technicians on CTQs, audit discipline, and error‑proofing.

• Translate customer and regulatory requirements into internal instructions and visual aids.

Success Metrics

• FPY/yield increases; DPPM reductions.

• Zero major audit findings.

• CTQs Green at launch.

• Verified CAPA effectiveness with reduced recurrence.

• Decreased COPQ with measurable savings.

• Reduced CCAR closure time.

Work Model & Travel

• On‑site role at Salisbury integration and test lines.

• Travel to suppliers and customers up to ~15–20%.

• Frequent collaboration with Manufacturing/Process, Test, SQE, NPI/PM, Industrial Engineering, and Customer Quality.

Education

• Bachelor’s degree in mechanical, Industrial, Manufacturing, Electrical Engineering, or equivalent experience.

Experience

• 5–8 years in Quality or Manufacturing Engineering for cloud/data‑center hardware or complex electromechanical systems.

• Hands‑on experience with ISO 9001:2015, internal auditing, PFMEA, control plans, PPAP/FAI, MSA, SPC, and 8D/A3.

• Proficient in Excel/Sheets and BI tools (Power BI, Tableau, Looker).

Preferred

• ASQ CQE or Six Sigma Green Belt.

• Experience with server/rack integration.

• Supplier development (APQP/PPAP) and customer‑facing quality experience.

• Familiarity with MES, PLCM, and ERP (SAP).

Physical Requirements

• Time on production floor; ability to lift 25–30 lbs. occasionally; PPE use as required.

What Can Jabil Offer You?

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options

• 401K Match

• Employee Stock Purchase Plan

• Paid Time Off

• Tuition Reimbursement

• Life, AD&D, and Disability Insurance

• Commuter Benefits

• Employee Assistance Program

• Pet Insurance

• Adoption Assistance

• Annual Merit Increases

• Community Volunteer Opportunities

At Jabil, we make the world’s best brands better by designing, manufacturing, and delivering end-to-end solutions on a scale. Our Salisbury, NC site supports high-growth cloud infrastructure customers—from server and rack integration to data-center subsystems—where quality, speed, and traceability are non-negotiable.

How will you make an impact?  

We are launching a new manufacturing site in Salisbury, NC focused on server systems, racks, and liquid-cooled infrastructure products.

• We are seeking a Supplier Quality leader with proven results standing up supplier quality at a facility from ground zero—creating the processes, developing the team, qualifying suppliers, and driving stable ramp to volume. 

• You will lead supplier quality strategy and execution across electrical and fluid handling supply chains.

• You will also manage a team of Incoming Quality Inspectors, establish robust incoming controls and escalation pathways while partnering closely with Engineering, NPI, Operations, and Program Management. 

What will you do ?

New Site Build-Out (Ground Zero)  

• Stand up the Supplier Quality function for a new facility: governance, SOPs, templates, and operating cadence. 

• Establish and deploy PPAP-based supplier readiness expectations aligned to customer requirements and internal standards. 

• Build a scalable model for supplier onboarding, qualification, risk tiering, and ongoing supplier performance management. 

Supplier Qualification, Audits & PPAP Execution  

• Lead supplier capability assessments and qualification activities (QMS/process audits, special process validation, traceability, calibration, ESD controls as applicable). 

• Own supplier PPAP strategy and execution including: 

• Design records & change control alignment. 

• Process Flow, PFMEA, Control Plan 

• MSA/GR&R, capability studies (Cp/Cpk where applicable) 

• FAI / dimensional layouts 

• Material certs, compliance requirements 

• Part Submission Warrant (PSW) approval and supplier readiness sign-off 

• Drive supplier corrective actions and verify effectiveness through data and re-validation. 

NPI → Ramp → Sustaining for Servers, Racks & Liquid Cooling  

• Partner with Engineering/NPI to identify  CTQs  and ensure suppliers can meet form/fit/function, reliability, and cosmetic expectations. 

• Support quality planning and validation for: 

• Servers & Racks:  Motherboards and all critical & non-critical components 

• Electromechanical:  PCBAs, harnesses, connectors, fans, PSUs, subassemblies 

• Liquid Cooling Products:  cold plates, manifolds, CDUs, pumps, heat exchangers, QD couplers, hoses/tubing, seals 

• Ensure supplier processes support leak integrity, cleanliness/contamination control, material compatibility, and thermal performance. 

Incoming Quality & Supplier Performance Management  

• Lead Incoming Quality Control strategy: inspection plans, sampling, gage control, inspection work instructions, and disposition workflows. 

• Build and manage supplier performance scorecards (PPM/DPPM, escapes, OTD, COPQ, audit performance). 

• Lead containment and escalation for supplier issues (stop-ship criteria, sorting, deviations/waivers, MRB support). 

Corrective/Preventive Action & Continuous Improvement  

• Drive structured problem solving with suppliers using 8D / A3 / 5-Why / Ishikawa. 

• Implement preventive actions tied to PFMEA risk reduction and field/production feedback. 

• Drive supplier process improvement focused on yield, cycle time, reliability, and cost of quality. 

People Leadership (Inspectors)  

• Lead, coach, and develop a team of Incoming Quality Inspectors (scheduling, training, work allocation, and performance management). 

• Build training and certification plans for inspectors (inspection methods, blueprint/GD&T basics, gage use, workmanship standards). 

• Ensure consistent execution of incoming inspection and clear escalation to SQE/Engineering. 

How will you get here? 

• Startup mindset: structured, fast, practical—build it right, then scale it. 

• Strong risk judgement, understands accurate vs must be “good enough to launch safely.” 

• Supplier influence without authority can drive action through clarity and standards. 

• Strong executive communication: can turn quality chaos into decision-ready updates. 

What Success Looks Like (First 6–12 Months)  

• PPAP-based supplier readiness framework deployed for the site. 

• Critical suppliers qualified with stable processes and approved PPAPs prior to ramp. 

• Incoming inspection system runs smoothly with trained inspectors and clear escalation. 

• Reduced supplier escapes and measurable improvement in PPM/DPPM and COPQ during ramp.

Education:  

• Bachelor’s degree in engineering (Mechanical, Manufacturing, Electrical, Industrial, or related). 

Experience:

• 7+ years’ experience in Supplier Quality / Manufacturing Quality in complex electromechanical products. 

• Demonstrated success building or scaling quality systems at a new site or major facility expansion. 

• Strong working knowledge and hands-on leadership using PPAP (PFMEA, Control Plan, MSA, capability, PSW). 

• Experience leading supplier audits and driving corrective actions to verified closure. 

• Ability to operate hands-on in a manufacturing environment (supplier floor + site floor). 

Travel Requirements: Up to 25% to suppliers and partner sites (domestic; occasional international if needed) 

Preferred Qualifications:

• Experience with data center hardware, servers, rack integration, or high-performance computing. 

• Experience with liquid cooling systems (leak, contamination, corrosion, seal integrity, material compatibility failure modes). 

• Working knowledge of ISO 9001 environment and customer audit readiness. 

• Lean/Six Sigma (Green Belt+) or equivalent structured CI experience. 

What Can Jabil Offer You?

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options

• 401K Match

• Employee Stock Purchase Plan

• Paid Time Off

• Tuition Reimbursement

• Life, AD&D, and Disability Insurance

• Commuter Benefits

• Employee Assistance Program

• Pet Insurance

• Adoption Assistance

• Annual Merit Increases

• Community Volunteer Opportunities

How will you make an impact?

• Under limited supervision, develops and maintains test procedures, tester hardware, and software for electronic circuit board production.

What will you do ?

• Review circuit board designs for testability requirements.
• Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
• Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
• Generate reports and analysis of test data, prepare documentation and recommendations.
• Review test equipment designs, data, and RMA issues with customers regularly.
• Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
• Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
• Determine conditions under which tests are to be conducted and sequences and phases of test operations.
• Direct and exercise control over operational, functional, and performance phases of tests.
• Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
• Analyze and interpret test data and prepare technical reports for use by test engineering and management personnel.
• Develop or use computer software and hardware to conduct tests on machinery and equipment.
• Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
• May provide training in new procedures for production testing staff.
• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
• Comply and follow all procedures within the company security policy.

How will you get here? 

• Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence, and procedure manuals.
• Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.
  
   
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

Physical Demands:

• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs.
• Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

Work Environment:

• The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
• Individual’s primary workstation is in the office area, with some time spent each day on the manufacturing floor.
• The noise level in this environment ranges from low to moderate.

Education:

• Bachelor of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

Experience: 

• Direct L10, L11, and L12 test expertise, strong Linux programming skills, and solid knowledge of GPU/CPU systems, understanding of cloud platforms and driving high-quality testing and technical excellence in a manufacturing test performance floor.

What Can Jabil Offer You? 

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: 

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 

• 401K Match 

• Employee Stock Purchase Plan 

• Paid Time Off 

• Tuition Reimbursement 

• Life, AD&D, and Disability Insurance 

• Commuter Benefits 

• Employee Assistance Program 

• Pet Insurance 

• Adoption Assistance 

• Annual Merit Increases 

• Community Volunteer Opportunities 

How will you make an impact?

• The Sr Manufacturing Engineer at Jabil, Inc. will play a pivotal role in optimizing manufacturing processes, driving continuous improvement, and leading technical projects to ensure efficient production and high-quality output.
• This position requires a strong technical background and leadership skills to guide and mentor a team of engineers.

What will you do?

• Design, develop, and implement robust manufacturing processes for new and existing products, focusing on lean manufacturing principles, automation, and cost reduction.

Technical Leadership & Mentorship:

• Provide technical guidance and leadership to a team of manufacturing engineers, fostering their professional development, and ensuring project execution aligns with company objectives.

Project Management:

• Lead complex manufacturing engineering projects from conception through completion, including planning, resource allocation, budget management, and risk mitigation.

Continuous Improvement:

• Identify and implement opportunities for process improvement, yield enhancement, defect reduction, and waste elimination using methodologies such as Six Sigma and Kaizen.

Tooling & Equipment:

• Evaluate, select, and procure new manufacturing equipment and tooling, ensuring compatibility with production needs and adherence to safety standards.

Documentation & Standardization:

• Develop and maintain comprehensive manufacturing documentation, including work instructions, process flow diagrams, and control plans, to ensure process consistency and repeatability.

Problem Solving:

• Conduct root cause analysis for manufacturing issues, implement corrective and preventive actions, and drive problem resolution across various production lines.

Collaboration:

• Work cross-functionally with R&D, Quality, Supply Chain, and Production teams to ensure seamless product introduction and efficient manufacturing operations.

Safety & Compliance:

• Ensure all manufacturing processes and equipment adhere to internal safety regulations and external industry standards.

How will you get here? 

• Proficiency in process development, optimization, and validation (e.g., FMEA, SPC, MSA).
• Strong understanding of Lean Manufacturing and Six Sigma principles (certification preferred).
• Experience with various manufacturing processes relevant to Jabil's product lines (assembly, tooling, and automation)
• Proficient in CAD software (e.g., SolidWorks, AutoCAD) and simulation tools.
• Experience with ERP/MES systems.

Leadership & Soft Skills:

• Proven leadership and mentorship abilities, with experience guiding and developing engineering teams.
• Excellent problem-solving and analytical skills.
• Effective communication (written and verbal) and interpersonal skills, with the ability to effectively collaborate with diverse teams.
• Demonstrated project management experience, including planning, execution, and monitoring.
• Ability to work independently and manage multiple priorities in a challenging environment.

Education:

• Bachelor’s degree in manufacturing engineering, Mechanical Engineering, Industrial Engineering, or a related technical field
• Master's degree preferred.

Experience:

• 7+ years of progressive experience in manufacturing engineering roles, with at least 2 years in a leadership or senior technical capacity.

What Can Jabil Offer You?

Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:

• Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
• 401K Match
• Employee Stock Purchase Plan
• Paid Time Off
• Tuition Reimbursement
• Life, AD&D, and Disability Insurance
• Commuter Benefits
• Employee Assistance Program
• Pet Insurance
• Adoption Assistance
• Annual Merit Increases
• Community Volunteer Opportunities