Engineering Jobs in Fairfield Beach Ohio Remote
56 positions found
What will you do?
Takes any necessary actions to make sure that a product or service will satisfy customer requirements and is the driving force in implementing continuous quality improvement.
SCOPE: (For their Production Sectors)
- The Quality Excellence of the Offers delivered to the customers
- The Quality Excellence of Supply Chain (from Supplier to Customers)
- The timely and effectively management of customer containment actions (Business Risk Escalation, Offer Safety Alerts…)
Main activities
- In charge of the Quality of one or several sectors
- Ensure that the Process Control Plan is applied and consistent with Failure Mode Effect Analysis (FMEA)
- Challenge supervisors to identify and manage risks in a preventive mode
- Be the local expert of the traceability system for the manufacturing floor.
- Lead Process Audits and Process FMEAs
- Create and maintain quality control documentation, insure related training and application in the sector
- Lead continuous improvement on its perimeter
- Lead containment actions, root cause analysis of quality issue and problem solving on his sector
- Be a member of the Short Interval Management (of the production lines)
- Provide solutions to increase Customer Satisfaction
- Provide inputs and challenge about quality for new evolution, contribute to process/control capability implementation.
- Be the local expert of the assembled products in his sector
What qualifications will make you successful?
- Minimum previous experience, in the functions described, of three years or less
- Mandatory good level of English.
- Bachelor of Science in Engineering (Mechanical, Industrial, Electrical, Electronic)
- 3 + years experience with manufacturing quality, manufacturing engineering, or equivalent
- Experience with 8D problem solving methodology, tool utilization (i.e. 5Why, fishbone (cause and effect), etc.)
- Six Sigma knowledge, experience, certification highly desired
- Experience on ESD desired
CMM Programmer
Springdale, OH
Onsite
Full Time
Responsibilities:
The Process Engineer will be responsible for programming Coordinate Measuring Machines (CMM) to support the manufacturing efforts. The CMM programming will be done using PC DMIS software. The role will include writing, editing, troubleshooting, and validating CMM programs to be used for measurement of jet engine components. The Process Engineer develops, enhances, and troubleshoots CMM programs for dimensional inspection of manufactured aerospace products. The Process Engineer must be able to read and interpret drawings and prints using Geometric Dimensioning and Tolerancing (GD&T) principals.
Duties and Responsibilities:
- Develop CMM programs using PC DMIS software, an advanced level of PC DMIS offline programming is expected.
- Read and understand prints/drawings and have an advanced knowledge of GD&T.
- Develop planning, processes, and work instructions
- Troubleshoot & prove-out CMM/ PC DMIS programs, direct GR&R validations, and validate work using multiple techniques
- Develop CAD based CMM inspection programs using both models and prints
- Work autonomously as well as collaboratively in identifying needs and validation plans. Providing proactive support to meet manufacturing requirements
- Follow system standards to development, implementation, and change management of metrology processes
Qualifications / Requirements:
- US citizenship required
- Approximately 20% travel time
- Advanced knowledge/experience programming CMM’s using PC DMIS software with scanning, offline programming, and complex geometry.
- Advanced knowledge/experience programming CMM’s using PC DMIS software with an emphasis on precision, repeatability and reproducibility
- Strong experience using, programming, troubleshooting, and editing PC DMIS programs.
- Experience using 5-axis REVO probe systems.
- Strong knowledge of GD&T and how to apply GD&T to inspection routines to satisfy print dimensions
- Strong mathematical, analytical, writing, and communication skills
- Knowledge and experience with CAD-based inspection using PC DMIS
- Strong collaboration & presentation skills to gain buy-in & effectively communicate program/process implementations and changes to the organization
Desired Characteristics:
- Programming or scripting experience (C++, C Sharp, Python, etc.)
- Self-starter – quick learner & able to identify alternative solutions for optimum results
- Experience in application of structured problem solving in continuous improvement
Quest Defense Systems and Solutions is seeking a Lead Materials Engineer to grow with our company. In this role, the engineer will be assigned to a well-structured Engineering Support office dealing with Aero Engines / Gearboxes domain, will be in charge for the activities related to R&D, test, analysis and characterization of materials, Verify & Validation development processes of new materials, definition of technical specifications of special treatments, failure analysis/investigation on damaged and/or NC components, partnering with other Departments (i. e. Design, Quality, Manufacturing, Supply Chain etc) and directly interfacing with suppliers.
Roles & Responsibilities:
• Support and drive material qualifications of new supplier's turbomachinery hardware ensuring robust processes while supporting supply chain capacity improvements.
• Prepare and present technical data to internal and external customers.
• Participate on business and industry teams supporting overall improvement in the application of special processes for turbomachinery parts.
• Provide technical and strategic support to supply chain through reviews and pre-production meetings.
• Define technical specifications and requirements.
• Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures.
• Evaluate non-conformances by reviewing, analyzing requirements and acceptability criteria, recommend disposition procedures and maximizing producibility
Required Skills (Technical Competency):
We're excited to talk to you if your qualifications meet the following criteria:
• 8+ years of experience as materials engineer in aerospace or gas turbine industry manufacturing, quality systems and field support.
• Bachelor/Master of Science in Materials Engineering, Materials Science, or Metallurgy
• Experience with primary processing (powder metallurgy, isothermal forge, & heat treatment) of turbomacinery materials.
• In depth understanding of metallurgy, manufacturing processes and inspections such as primary melting, forging, heat treatment used in the Aerospace industry.
• In depth understanding of the supply chain
• Some expertise in Additive Manufacturing processes and technologies will be preferential;
• Broad knowledge about different materials (metallic, ceramic, composite, polymeric etc) and experience on characterization tests;
• laboratory operations experience (knowledge of procedures, equipments etc);
• Finite Elements Analysis background (knowledge of ANSYS tool advantageous but not mandatory)
• Knowledge about coating / surface treatments processes advantageous but not mandatory
• Good computer skills (Excel, PowerPoint, Word, Outlook)Project Management experience is desired, but not required
• Strong interpersonal skills and ability to work in a team environment
• Like to work in a fast paced, creative environment
• Enjoy people and dynamic teams with diverse experiences. We have fun together!
• US Citizen or Permanent Resident required
Physical Requirements & Work Environment:
• Mostly Office Environments, Occasional Shop Floor involvement.
• Substantial amounts of telephone and computer work.
• Heavily Regulated Industries with strict adherence to procedures.
• Flexibility to meet business deadlines by staying late or arriving early.
• Typical 8 hour days plus lunch / 40 hour weeks / core (required) hours are 9AM to 4PM
• Ability to use personal transportation to visit customer locations.
• Due to the nature of the work, all candidates must be a U.S. Citizen or Permanent Resident.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Full compensation package is based on candidate experience and certifications
Pay Ranges
$85,000 - $105,000 USD
Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.
Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.
What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.
Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.
Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.
Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.
Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.
Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.
Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.
Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.
Specific options depend on the Sailor's status, training, and current Navy policy.
Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.
Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.
Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.
Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.
Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.
It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.
Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.
Salary: $130,000
- $150,000 per year A bit about us: Position: RF Staff Engineer Target Salary: $130-150k+ base (depending on experience) + bonus Location: West Chester, OH – on-site (see schedule options below)
- relocation package available Seeking: BS Electrical Engineering Must Have 8+ years of experience Solid Job History AWR Microwave Office is a big plus! Provide technical leadership to develop, integrate, and support RF products across their lifecycle, ensuring alignment with business and technical goals.
Guide cross-functional teams to drive product success.
Why join us? Flexible On-Site schedules include: •Standard Monday to Friday, 8-hour days, OR •9-hour days with alternate Fridays off, OR •9-hour days with every Friday half-day, OR •10-hour days with every Friday off.
Health/Dental: Yes 401k: Yes + Profit Sharing up to 3% of Base salary PTO: Yes, + 10 holidays Job Details RF Staff Engineer Collaborate with engineering, program management, and functional teams to meet organizational goals and KPIs.
Lead product development efforts, ensuring technical and business alignment.
Define product roadmaps and support business development by proposing innovative solutions.
Prioritize customer needs and guide opportunity introduction and program direction.
Design high-performance RF products focusing on low loss, high linearity, EMI/EMC, and reliability.
Oversee product design through the lifecycle to meet cost, size, weight, power, and manufacturability goals.
Mentor junior engineers and support their technical development.
Develop performance validation and production test processes to ensure designs meet specifications.
Communicate effectively with internal teams and customers to ensure product success.
KNOWLEDGE, SKILLS AND ABILITIES: Expertise in RF system integration and testing at circuit, module, and system levels.
Proficiency in AWR Microwave Office or similar RF simulation tools.
Strong project leadership experience, with the ability to influence key decisions.
Experience with military standards and specifications is highly desirable.
Excellent communication skills, both internal and external, particularly with customers.
Ability to work cross-functionally in a multi-disciplinary team environment.
QUALIFICATION REQUIREMENTS: Must be a U.S.
person (U.S.
citizen or permanent resident).
BSEE (Bachelor of Science in Electrical Engineering) with 7-10 years of experience, or MSEE (Master of Science in Electrical Engineering) with 5-8 years of experience.
Experience with AWR Microwave Office or similar tools is highly preferred.
Familiarity with military standards and electro-mechanical designs is highly desirable.
Moderate noise level in office and laboratory settings.
ESD and Personal protective equipment (PPE) required in sensitive lab or restricted manufacturing areas.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Our client engineers and manufactures custom material handling solutions supporting the automotive, aerospace, finishing, storage & retrieval, and other heavy manufacturing industries and they are seeking a hands-on, detail-oriented Project Manager to join their team!
Responsibilities
- Lead projects from purchase order to customer acceptance.
- Responsible for leading a team in the production of bill of materials, installation drawings, detail drawings, and documentation for assigned jobs.
- Serve as a liaison between engineering and manufacturing.
- Maintain project schedule by monitoring project progress, coordinating activities, and resolving problems.
- Assist with installation and provide engineering supervision at customer's facilities.
Qualifications
- 5+ years of engineering design experience
- 3+ years project management experience
- CAD experience - AutoCAD, Inventor ME, MET, or equivalent
Required Skills
- PMP certificate
- ERP knowledge (NetSuite or similar)
- Material handling equipment experience or Industrial, Construction, Manufacturing experience
- Metal fabrication knowledge /experience (Laser cutting, press brake, welding)
- CNC knowledge (Lathe, Mill)
- FEA knowledge (NASTRAN, ANSYS, or similar)
Salary: $120,000
- $135,000 per year A bit about us: My client is a leading manufacturer of custom medical device products.
As they grow, they are looking to add a Program Manager to their team.
The Engineering Program Manager leads cross-functional teams of engineers in the design, development, production, and successful delivery of high-quality medical device products.
This role serves as the client’s primary point of contact and manages larger programs involving multiple NPI projects from customer request to delivery.
Why join us? Compensation Up To $135,000 Job Details Essential Job Functions Serve as the primary point of contact for clients, managing large programs that involve multiple NPI projects.
Establish and coordinate effective communication between operations, sales, customers, and external partners.
Manage all stages of product design and development through manufacturing transfer, ensuring designs meet functional, quality, and regulatory requirements.
Identify and translate customer needs into technical and product requirements.
Oversee product design, documentation, design verification, process validation, PPAP documentation, and PO/contract reviews.
Review and mentor team members’ technical work to ensure quality, manufacturability, and continuous improvement.
Lead internal strategic projects and initiatives, driving innovation and process optimization.
Develop and maintain long-term customer relationships while providing ongoing product support.
Participate in costing and pricing activities to ensure project profitability.
Establish and maintain design schedules and budgets.
Drive internal processes, including Managing for Daily Improvement (MDI), Integrated Business Planning (IBP), Good Manufacturing Principles (GMP), and Good Documentation Practices (GDP).
Required Skills and Abilities Demonstrated technical competence in and experience with manufacturing techniques, including sheet metal working, machining of metals and plastics, vacuum thermoforming, and/or injection molding.
Familiarity with tool design for sheet metal working, plastic machining, vacuum thermoforming, and injection molding.
Proficiency in 3D CAD software, preferably SolidWorks.
Experience with test method development, qualification, and design control.
Proven track record of successful product design, development, and launches, with coordination of multiple, simultaneous engineering projects of varying complexity.
Familiarity with online project management tools, such as Miro, Trello, Smartsheet, and .
Required Knowledge and Experience 6+ years of experience in a related job role; include some portion of that in the medical device field.
Bachelor’s degree in Mechanical Engineering or a related technical field, Or any equivalent combination of education, training, and experience that demonstrates the ability to perform the duties and responsibilities as described, including an internship in a relevant trade.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $85,000
- $120,000 per hour A bit about us: This Cincinnati‑based industrial engineering and solutions provider is a recognized leader in hydraulics, motion control, automation, and custom‑engineered systems.
They’re known for tackling complex technical challenges, supporting major manufacturers across the Midwest, and creating an environment where technicians and engineers can grow fast.
With strong stability, modern facilities, and a culture that invests in training and long‑term development, it’s an excellent place for skilled professionals looking to advance their careers.
Why join us? If you are looking for a great fit and want to work hands‑on with modern equipment, and real problem‑solving—not corporate busywork.
We’re known for hydraulics, motion control, and automation expertise, supporting major manufacturers across the Midwest.
Employees love the stable environment, strong career development, and the chance to work on high‑impact industrial projects where your skills truly matter.
Job Details The Industrial Hydraulics Application Engineer serves as the technical authority supporting sales and engineering teams in the development of high‑performance hydraulic solutions.
This role leads technical evaluations, application design, and system validation while ensuring solutions meet customer requirements, safety standards, and industry best practices—from concept through commissioning.
Key Responsibilities Partner with sales and customers to define application requirements and develop hydraulic system designs.
Create hydraulic schematics, size components, prepare BOMs, and deliver technical input for proposals and quotations.
Review and approve designs, support testing and validation, and recommend improvements based on field performance.
Provide startup, commissioning, troubleshooting, and technical support for new and retrofit systems.
Qualifications Bachelor’s degree in Mechanical Engineering, Fluid Power, or related field.
3+ years of industrial hydraulics or systems integration experience.
Strong knowledge of hydraulic circuit design, component selection, and industry standards (UL/CE a plus).
Proficiency with CAD and hydraulic modeling tools.
Ability to travel up to 15%.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Salary: $70,000
- $110,000 per year A bit about us: We are a multi-disciplinary design firm composed of experienced architects, engineers, landscape architects, planners, and surveyors serving the Greater Cincinnati and regional area.
Civil Engineering services include:
- Due diligence studies
- Land development planning
- Value engineering solutions
- Site layout design
- Roadway design
- Grading and stormwater pollution prevention plans
- Sanitary system design
- Stormwater management design Why join us? Strong compensation & benefits, great culture
- We offer an excellent employee benefits package including: Health Insurance Life Insurance Short-Term Disability Insurance Long-Term Disability Insurance Employee Assistance Plan Flexible Benefits Plan 401(k) Plan PTO (Paid Time Off) & Holidays Job Details Civil Engineering Project Manager with experience in civil engineering land development, infrastructure design, and construction document preparation for roads, parking areas, storm drainage systems, storm water management facilities, utilities-water mains, sanitary sewers, sediment and erosion control and outline specifications.
This position includes the advancement of land development civil engineering design concepts, which are incorporated in the final product by Staff Technicians.
Candidates shall have adequate written and verbal communication skills and be able to work closely with other team members, local review agencies and interact with clients.
The Project Manager is responsible for the overall supervision of assigned projects, to assure the project conforms to the contractual agreement the firm has made with the client, that the project is completed within the allocated period of time and within the assigned budget.
The Project Engineer/Manager may assume the role of both Project Engineer and Project Manager for selected projects.
Typical Duties: Analyzes reports, maps, drawings, blueprints, tests and aerial photographs regarding soil composition, terrain, hydrological characteristics and other topographical and geologic data to plan and design project.
Provides and develops schematic design information.
Incorporates design concepts from schematic design development and work with project team to produce construction documents.
Coordinates work with other design professionals.
Coordinates staff activities to assure achievement of project budget, schedule and quality goals.
Produces drawings and sketches to be incorporated in drawings by drafters.
Directs technicians to convert designs to working drawings.
Performs and prepares calculations using engineering formulas and skills for the design of storm sewers, storm detention systems, construction site storm water best management practices, and sanitary sewer systems.
Utilizes computer programs and spreadsheets for engineering analysis and presentations.
Selects details, general notes and outline specifications to be used for the project.
Acts as liaison with reviewing agencies.
Interaction with client during the project and after completion.
Available to respond to questions and to provide daily guidance to the project team.
Recognizes problems quickly, seek advice from group leaders and develop solutions.
Provides value engineering.
Responsible for the accuracy and quality of plans.
Develops technical competence for junior team members.
Attends construction meetings and produces site observation reports.
Undertakes, where appropriate, and assists in business development.
Participates in selected organizations that are in the best interest of the company.
Participates in preparation of contractual agreements and understands the requirement of the contract with client.
Knowledge and Experience Required:
- This position requires a bachelor’s degree in engineering, professional engineering registration with the State of Ohio and a minimum of 7 years of experience in land development engineering.
- Possess a strong desire to continue learning, advance professionally, and demonstrate ability to work in a fast-paced, design team environment.
- Understanding of local, state and federal codes and regulations.
- Ability to utilize computer systems as a tool to effectively design and manage projects.
- Capable of managing multiple projects and multiple project teams.
- Must have developed skills in communication, leadership, planning teamwork, decision making, judgement and project solving.
Interested in hearing more? Easy Apply now by clicking the "Apply Now" button.
Jobot is an Equal Opportunity Employer.
We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws.
Jobot also prohibits harassment of applicants or employees based on any of these protected categories.
It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions.
Sometimes Jobot is required to perform background checks with your authorization.
Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.
Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at /legal.
By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners.
Frequency varies for text messages.
Message and data rates may apply.
Carriers are not liable for delayed or undelivered messages.
You can reply STOP to cancel and HELP for help.
You can access our privacy policy here: /privacy-policy
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Principal Mechanical Design Engineer (Data Center Infrastructure) is a technical leader responsible for the architecture, integration, and validation of advanced mechanical systems supporting hyperscale data center environments. This role requires deep expertise in liquid cooling technologies (single-phase and two-phase), hydronic system design, structural integration, and manufacturable rack-level infrastructure solutions.
This role is responsible for defining system performance requirements, developing technical specifications, selection and integration of critical components, and leading mechanical design from concept through production release. Responsibilities include wetted material selection, thermal and structural analysis, fastening strategies, component layout, and design for manufacturability. Partners cross-functionally to deliver reliable, scalable, and cost-effective Data Center Infrastructure solutions while advancing innovation in liquid cooling performance.
What will you do?
- Lead the end-to-end mechanical design and engineering of hyperscale Data Center Infrastructure (DCI) systems, including liquid-cooled rack assemblies, CDUs, manifolds, enclosures, structural frames, and associated hydronic piping systems.
- Serve as the technical authority for single-phase and two-phase liquid cooling architectures, including primary and secondary loop design, in-rack distribution, and system integration within hyperscale data center environments.
- Define and validate operational performance requirements for liquid-cooled infrastructure, including pressure ratings, hydrostatic limits, temperature ranges, flow rates and uniformity, thermal expansion, durability, and serviceability.
- Design, analyze, and validate machined components, welded fabrications, manifolds, and structural systems using advanced engineering principles, including stress analysis, finite element analysis (FEA), flow modeling, and structural load calculations to ensure mechanical integrity and code compliance.
- Lead wetted material selection and compatibility analysis for liquid cooling systems, including corrosion mitigation strategies, surface treatments, cleanliness standards, and long-term durability considerations.
- Develop and review CAD models and complete technical data packages using CREO, SolidWorks, or equivalent tools; ensure design accuracy, manufacturability, and system-level integration.
- Author and approve technical specifications for piping systems, rack-level cooling infrastructure, and hydronic components, including installation guidelines, maintenance procedures, testing requirements, and compliance with applicable standards (ASME, ISO).
- Establish and oversee validation protocols including hydrostatic pressure testing, leak detection and mitigation, flow resistance analysis, and corrosion verification to ensure regulatory compliance and operational reliability.
- Evaluate customer design proposals and technical specifications to assess feasibility, manufacturability, cost, and risk; provide recommendations to optimize performance and total cost of ownership.
- Lead cross-functional design reviews with electrical, thermal, manufacturing, quality, and supply chain teams to ensure full system integration and compliance with product specifications and applicable plumbing and hydronic codes.
- Optimize rack manifold design and manufacturing processes, including machining, welding, surface finishing, connection interfaces, venting and draining strategies, and flow path optimization to enhance performance and manufacturability.
- Drive continuous improvement in manufacturing assembly methods and tooling in collaboration with production teams and equipment vendors to improve quality, scalability, and cost efficiency.
- Lead root cause investigations for complex mechanical failures identified during validation or field deployment and implement corrective design improvements.
- Provide technical leadership in vendor qualification and management for mechanical components and liquid cooling subsystems.
- Identify and mitigate technical risks impacting performance, schedule, or cost, and contribute to R&D initiatives advancing liquid cooling technologies and system innovation.
MINIMUM QUALIFICATIONS
Education:
- Bachelor’s degree in Mechanical Engineering, Systems Engineering, or a related engineering discipline from an accredited university.
Experience:
- 8 years' experience in mechanical design and integration of mission-critical systems.
- Proven track record of successful system designs and implementations in a relevant industry
- Strong understanding of mechanical systems, integration strategy, and system coordination
- Familiarity with industry standards and regulations related to Energy Storage Systems and Data Center Infrastructure is preferred.
- Excellent problem-solving skills and attention to detail
- Strong communication and teamwork abilities
PREFERRED QUALIFICATIONS
- Master’s Degree in Mechanical Engineering
- Professional Engineer (PE) License
Remote working/work at home options are available for this role.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.
*At Securian Financial the internal position title is Infrastructure Dir."
Mission
"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."
Positioning
The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.
This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.
Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.
Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.
Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.
Scope of Accountability
Resilience Engineering & Cloud Reliability
Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.
Own resilience automation, chaos testing, and IaC-based recovery validation.
Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.
Quality Engineering & Continuous Testing
Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.
Drive automation-first testing (functional, non-functional, performance, resilience).
Embed observability-driven quality validation and contract testing across services.
Performance, Capacity & Efficiency Engineering
Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).
Partner with Platform & Infrastructure teams to tune performance across application and platform layers.
Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.
Cross-Domain Architecture Collaboration
Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.
Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.
Engage Data Architects for data resilience, replication, and pipeline reliability.
Work with Business Architects to align technical reliability goals with critical business outcomes.
Leadership & Talent Development
Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.
Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.
Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.
Core Technical Competencies
AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.
Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.
Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.
Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.
Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.
Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.
Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.
FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.
Leadership Competencies
Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.
Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.
Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.
Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.
Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.
Qualifications & Experience
12+ years in cloud engineering, reliability, or platform leadership roles.
5+ years leading Sr. Managers/Managers in technical domains.
Proven expertise across AWS, with working knowledge of Azure and GCP.
Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.
Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.
Certifications:
Required: AWS Certified Solutions Architect - Professional
Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect
Success Metrics
99.9% availability maintained for Tier-1 workloads.
100% coverage of DR automation for Tier-1 services.
25% annual increase in automated quality/test coverage.
15% annual improvement in resource efficiency and cost performance.
Documented resilience participation across all enterprise architecture blueprints.
Positive "technical peer readiness" and succession rating from Head of REO.
Summary Value Proposition
This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.
It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$145,000.00 - $267,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
RESPONSIBILITIES:
- Architect, design, and maintain scalable CI/CD pipelines using Azure/AWS DevSecOps.
- Build and optimize Docker-based microservices, images, and deployment pipelines.
- Lead deployments across Docker Swarm, Kubernetes/EKS, and multi-location environments.
- Develop infrastructure automation using Ansible, bash scripting, Terraform and Git-based workflow.
- Manage release pipelines using container registries, artifact feeds, template pipelines, and multi-stage workflows.
- Design multi-environment strategies for dev, QA, staging, and production deployment.
- Implement cloud-native services with AWS & Azure cloud platforms.
- Implement basic security practices, including IAM roles, secrets management, and access controls.
- Develop secure, modular, reusable build and release systems.
- Work closely with full-stack engineering teams (Angular, Java, Python , backend APIs, database engineers).
- Mentor junior DevOps engineers and lead DevOps roadmap decisions.
KNOWLEDGE REQUIREMENTS:
DevOps Expertise:
Azure DevOps pipelines, YAML templating, CI/CD strategy, Git branching models.
Containerization & Orchestration:
Docker images, Docker Compose, Docker Swarm, multi-node/multi-location deployments.
Cloud Technologies:
Azure deployments & infrastructure, AWS (IAM, Lambda, S3, CloudWatch).
Programming / Scripting Languages:
Python, Bash, Linux/Unix administration, awk, shell automation, groovy.
Infrastructure Automation:
Ansible playbooks, tasks/roles, inventory design, configuration management.
Distributed Deployment Architecture:
Multi-site replication, node selection by IP, dynamic service routing.
Database Stack Experience:
PostgreSQL, MySQL, MariaDB operations & migrations.
Observability & Logging:
CloudWatch monitoring, log collection, Prometheus, Grafana, reporting & metrics.
Version Control & Build Systems:
Azure Devops, Git, Git submodules, artifact storage, registry solutions, Secrets Management.
Nice to have AI knowledge/experience and willingness to learn.
EDUCATION & EXPERIENCE REQUIREMENTS
- BS degree in Electrical/Computer Engineering, Computer Science or related field. MS preferred.
- 7+ years experience in a software devops/development/test capacity with enterprise server, storage or networking products.
Remote working/work at home options are available for this role.
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Title : Principal Mechanical Design Engineer
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education :
Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience :
8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master’s Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Title : Principal Mechanical Design Engineer
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education :
Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience :
8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master’s Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES · Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS · Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
Job Title: Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization : Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education :
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience :
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
