Jobs in Dulles Virginia

• 
  
• Design / Engineering
  
  • 
    
  • Assists Senior Engineers in design documents for SCADA/Automation projects
    
    • 
      
    • Developing design document narratives
      
    • Perform requirements analysis
      
    • Understanding of Sequence of Operations (SOO) / System Functional Documentation
      
    • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications)
      
    • Comment Resolution
      
    
    
    
  • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects
    
    • 
      
    • Review design document narratives
      
    • Perform execution and design scope gap analysis
      
    • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements
      
    • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance
      
    • Assist in reviewing project specifications
      
    • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing
      
    
    
    
  
  
  
• Programming
  
  • 
    
  • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems
    
  
  
  
• Testing / Troubleshooting / Deployment / Commissioning
  
  • 
    
  • Assist senior engineers in creating and updating testing and commissioning procedures
    
  • Preparation of test reports
    
  • Originates test procedures
    
  • Commissioning of deployed systems
    
  • Development of test equipment and simulation devices
    
  • Perform Factory and Field Testing
    
  
  
  
• Maintenance
  
  • 
    
  • Perform troubleshooting on service calls to existing and legacy system operators
    
  • Perform hardware / software upgrades and replacements on existing systems
    
  
  
  

• 
  
• Estimates
  
  • 
    
  • Assists senior engineers in preparation of cost estimates and supporting documentation
    
  • Work with relevant stakeholders to review scope of project
    
  • Conduct any surveys, inspections, tours, etc. of client sites, as required
    
  • Assists senior engineers in evaluation and pricing of change orders from vendors
    
  
  
  
• Personnel Management
  
  • 
    
  • Assigns tasks and coordinates with Technical Staff
    
  • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers.
    
  
  
  

• 
  
• Bachelor degree in electrical or mechanical engineering and 2-5 years field experience
  
• Associate degree in the electrical or mechanical field (add 3 years field experience)
  
• High school diploma (add 5 years field experience)
  
• 2-5 years' experience with designing and servicing controls systems for switchgear, substations, metering and SCADA/Fault Data/SER/Integration-Automation equipment installation and testing
  
• Experience in reading electrical and control schematics
  
• Experience in electrical power monitoring systems (EPMS) startup, configuration, and calibration
  
• Experience in testing and troubleshooting control and protection systems
  
• Experience using basic electrical and hand tools
  
• Experience using testing, calibration, or industry-specific tools and software
  
• Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc.
  
• Experience with 3 phase power systems; power system protection & control schemes; test equipment; test equipment software
  
• MUST BE A US CITIZEN
  

• 
  
• Experience in OT and IT networking technologies and topologies
  
• Experience troubleshooting and diagnosing OT and IT networks and protocols
  
• Experience in CAD/CAE Software (Visio, AutoCAD)
  
• Experience in schedule management software (Project, Primavera P6)
  
• Standard Office Software (Microsoft Word, Excel, Access etc.)
  

• 
  
• Required Certifications
  
  • 
    
  • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider Power Monitoring, Rockwell, Siemens, JCI, Eaton Foreseer, etc.
    
  • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc.
    
  
  
  
• Preferred Licenses / Certifications
  
  • 
    
  • Design Build Institute of America (DBIA)
    
  • Certified SCADA Security Architect (CSSA)
    
  • Certified Automation Professional (CAP)
    
  
  
  

• 
  
• While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person.
  

• 
  
• REQUIRED: NetSuite experience
  
• PREFERRED: Ability to work with multiple levels within the organization to document and collect requirements and then translate these requirements into intuitive, actionable reporting solutions through NetSuite Analytics Warehouse (NSAW).
  
• Create standards for reporting, dashboards, and visualization solutions.
  
• Creates reusable data models that are aligned to governance and department standards.
  
• Document business definitions, data logic and repot specifications.
  
• Create standards around change management for data models and NSAW.
  
• Validate and ensure data accuracy, consistency and reliability across all data models and reporting.
  
• Create documentation, hands on training and recorded training to increase end user acceptance and engagement.
  
• Other duties as assigned.
  

• 
  
• Bachelor's degree in computer information systems, or related field.
  
• 5-10 years hands on experience.
  
• Experience with Power BI, Tableau, NetSuite Analytics Warehouse, or other major Business Intelligence Tools.
  
• Transforming complex enterprise data into usable models, and visual designs for end users.
  
• Effective analytical thinking and problem-solving skills, with ability to translate business questions into analytical requirements
  
• Effective communication skills for partnering with non-technical stakeholders and document, validate and provide quality assurance skills.
  
• Must be a US Citizen
  
• Excellent verbal and written communication skills.
  

• 
  
• Proficient in Microsoft Office Suite or related software.
  
• Excellent organizational skills and attention to detail.
  
• Excellent interpersonal skills.
  

• 
  
• Microsoft Office Suite or related software.
  

• 
  
• No supervisory responsibilities for this position.
  

• 
  
• Prolonged periods of sitting at a desk and working on a computer.
  
• Must be able to lift 15 pounds at times.
  
• Frequently required to stand, walk, stoop, kneel, crouch, or crawl.
  

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The Market TechOps Leader is responsible for leading technical operations within an assigned market, overseeing project management and installation execution to ensure consistent delivery performance, financial results, and client satisfaction. This role serves as the primary operational counterpart to market Sales leadership, aligning delivery capabilities with pipeline demand and client commitments. Reporting to the Territory TechOps Leader, the Market TechOps Leader provides leadership for Project Managers, TechOps Leaders, and associated delivery teams. This role focuses on execution excellence, resource coordination, team development, and issue resolution while ensuring projects are delivered in accordance with established standards, schedules, and financial targets.

Location: Must living in the Sterling VA area

What You'll Do:

* Provide market-level leadership for technical operations, overseeing Project Managers and TechOps Leaders responsible for project execution and installation delivery.

* Partner closely with market Sales leadership to align delivery capacity, execution strategy, and resourcing with pipeline demand and client expectations.

* Ensure projects are executed on time, within scope, and in alignment with financial and quality targets.

* Monitor project performance across the market, identifying risks, delays, or cost issues and implementing corrective actions as needed.

* Enforce operational standards, processes, and workflows to drive consistency, quality, and efficiency across project teams.

* Coordinate resource utilization across projects, balancing workloads and supporting cross-project or cross-market needs when required.

* Serve as the primary escalation point for market-level delivery issues, including project performance, staffing challenges, and client concerns.

* Collaborate with Engineering, Configuration & Commissioning, and Fabrication leadership to ensure smooth handoff and execution across disciplines.

* Support project launch, execution, and closeout practices to ensure clarity of roles, expectations, and deliverables.

* Lead performance management, coaching, and development for Project Managers and TechOps Leaders within the market.

* Promote a culture of accountability, ownership, teamwork, and continuous improvement within market delivery teams.

What You'll Bring:

Required Skills/Qualifications:

1. 
   
   
2. 
   
   
   • 
     
     
   • 7+ years of experience in systems integration, AV delivery, project management, or related technical operations roles.
     
     
   • 3+ years of experience leading project managers, field leaders, or delivery teams.
     
     
   • Strong understanding of project management, installation, and field execution workflows.
     
     
   • Demonstrated ability to manage multiple concurrent projects and teams.
     
     
   • Experience driving delivery performance, quality, and financial results at the market level.
     
     
   • Strong communication, leadership, and problem-solving skills.
     
     
   
   
   

Preferred Skills/Qualifications:

• 
  
  
• Bachelor's degree in business, engineering, construction management, or related field.
  
  
• Industry certifications such as PMP, CTS, CTS-I, or CTS-D.
  
  
• Experience partnering closely with Sales leadership.
  
  
• Background in operational improvement or change management initiatives.
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

• 
  
• Estimate and scope MEP trades during pre-construction (as applicable / future support)
  
• Review Contract Documents, making suggestions/modifications as they relate to the MEP trades and approved construction drawings and specifications
  
• Review BOD for MEP compliance
  
• Review and coordination of submittals and shop drawings
  
• Act as Energy Marshall in the isolation and energization of all electrical equipment in accordance with the safety plan.
  
• Assist Superintendent and Field Staff in managing MEP subcontractors throughout duration of the project (from groundbreaking through commissioning and turnover to owner)
  
• Assist with scheduling MEP installation activities.
  
• Review, inspect, and provide oversight of construction drawings during MEP installation
  
• Work with Superintendent on project logistics and temporary facility plans
  
• Review and comment on scope, material, and equipment for MEP systems prior to installation
  
• Monitor the installation and start-up of MEP systems and commissioning of project with Engineer & Owner
  
• Inspect MEP installation during construction.
  
• Review Coordination and Arc Flash studies
  
• Review and provide field verification of torque and meggar reports provide by trades, and assure reports are submitted during final turnover.
  
• Coordinate activities, materials procurement and other related activities with Project Superintendent and Field Staff
  
• Communicate progress and prepare appropriate reports as needed (Procore)
  
• Represent SE MCS regarding the MEP process at weekly Owners and contractors' meetings.
  
• Mentor project staff, if applicable
  
• Lead and direct the coordination process to resolve all conflicts during installations and start-up
  
• Perform other duties as assigned.
  
• Schedule shifts may incl nights/weekends as per bell curve requirements
  
• Significant travel required for this role - 50% (rotating two or three weeks on project site and one week working remote)
  

• 
  
• Bachelor's/Associates Degree a plus or comparable experience in mechanical, electrical or fire protection/life safety engineering, construction management.
  
• Construction trade specific experience with increasing levels of responsibility and demonstrated abilities to direct the work of others.
  

• 
  
• Proficient in Microsoft Office or related software, Procore preferred.
  

• 
  
• Supervises subordinate employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.
  
• Occasionally lift and/or move up to 25 pounds, and ability to bend, stoop, kneel, crouch, or crawl. Frequent use of hands to fingers, and ability to reach with hands and arms. Specific vision abilities required include close vision, ability to adjust focus, and ability to see color. Requires eye-hand coordination and manual dexterity sufficient to operate office equipment. Requires normal range of hearing and eyesight to record, prepare and communicate written or online documentation. Involves contact with other individuals. Frequent sitting, standing, and walking. Work is performed primarily indoors.
  

• 
  
• No supervisory responsibilities
  

• 
  
• While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must occasionally lift and carry up to 50 pounds.
  

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

The installation technician is responsible for performing a wide variety of installation duties on technology projects for our clients. This position is the key field position for the bulk of the actual work that gets done in our clients buildings. The install tech needs to coordinate with project management, field superintendents and others to fully understand their role on specific projects. They interpret our drawing packages to create the basis of the finished systems. This installation can include displays, projectors, loudspeakers, microphones, equipment racks, etc. Will also provide advice and guidance to Associate Installation Technicians as necessary.

Location: Must live in the Washington DC - VA area.

What You'll Do:

• 
  
  
• Perform structured cabling installation: pull, terminate, label, and dress cables per project documentation and standards.
  
  
• Complete physical installation and wiring of AV devices (displays, speakers, microphones, cameras, control interfaces, etc.).
  
  
• Assemble, populate, and dress equipment racks with a high degree of workmanship and adherence to design documents.
  
  
• Solder and terminate connectors according to project specifications and accepted industry practices.
  
  
• Execute light physical construction tasks as required (e.g., blocking, mounting surfaces, hardware installation).
  
  
• Follow Diversified's installation procedures, quality guidelines, and safety protocols with minimal deviation.
  
  
• Maintain accurate daily records: timesheets, daily field reports, checklists, and as-built documentation.
  
  
• Collaborate effectively with Project Managers, Engineers, and Lead Technicians to ensure project milestones are met.
  
  
• Represent Diversified professionally on active job sites, including client and construction environments.
  
  
• Actively participate in ongoing training and skill development toward advancing technical proficiency.
  
  

Complexity:

This level of technician will be responsible for performing tasks on clients job sites with little supervision. On smaller projects this position may be responsible for the coordination with clients, contractors and subcontractors.

Decision Making Authority:

This position is often alone on the job sites and requires making good judgement about decisions that need to be made. In general the project manager and a site supervisor are available to answer questions. This position requires good diplomacy in working with our clients and other key stakeholders on the job sites.

Physical Working Environment:

Physical Demands:

The physical demands described here are representative of those that may be met by an employee. The employee may be exposed to construction site conditions on a regular basis. Employee will be responsible for their safety while on job sites and to comply with all safety regulations in place by the GC. Use of PPE is usually required on job sites. The employee can typically spend at least 60% of their time on their feet and be required to mobile around the construction site. The employee must have the ability to occasionally climb ladders, use stairs and lift and/or move materials up to 40 pounds in construction areas. The individual is regularly required to use keyboards, test equipment and controls required for SI installation projects. Specific vision abilities required for this job include close vision, distance vision, peripheral vision and depth vision. When not on construction sites, the employee will experience normal office conditions and be required to use office equipment such as computers, peripherals, etc.

Travel:

Frequent travel by car and occasional airplane trips are required. Employee must possess a valid driver's license in their state of residence. Employee will be required to use their own vehicle and will be reimbursed for mileage at the current corporate rate. Local travel to job sites (within a 2 hour driving distance each way) will make up 70-90% usually but remote travel can be up to 30% of the job at times. 10% remote travel is required on a regular basis.

What You'll Bring:

Education/ Certifications:

* High school or GED equal
* AVIXA CTS Certification is desired.
* Must have a valid drivers license and adhere to our insurance requirements
* OSHA 30 Certificate is highly desired. (NYC OSHA30 is desired)
* Other relevant certifications may be required or preferred based on the technology focus of the position.

Required Skills/Qualifications:

• 
  
  
• 1+ years as an associate technician and/or fabrication technician or related industry experience.
  
  
• Proven ability to perform core AV installation tasks with minimal direct instruction.
  
  
• Competency with hand tools, power tools, and installation materials required for AV integration.
  
  
• Strong understanding of cabling types, termination techniques, and device mounting requirements.
  
  
• Ability to interpret functional design drawings, cable riser diagrams, and architectural drawings.
  
  
• Comfortable working on ladders, lifts, and in construction environments.
  
  
• Strong work ethic, attention to detail, and commitment to quality workmanship.
  
  
• Effective communication skills and ability to collaborate within a project team.
  
  
• Flexibility and adaptability to evolving site conditions and project priorities.
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

TITLE: Project Manager, Construction II

POSITION SUMMMARY:

As Project Manager, Construction II you will be responsible for providing leadership and driving success of multiple facets of data center projects. The position covers all aspects of construction. Areas of expertise require autonomy and independent discretion in the following areas:

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• 
  
• RFP development and budgeting
  
• Pre-bid oversight and coordination
  
• Managing all design phases and documents
  
• Conduct project meetings, publish, and distribute minutes, develop milestones, and maintain monthly reports.
  
• Manage day-to-day office and field operations.
  
• Review the plans and specifications for constructability and construction schedules. Advise the project team of any issues or deficiencies.
  
• Prepare, manage, and update the detailed project schedule with sequence and activity duration including procurement items.
  
• Customer engagement for sales and fulfillment of requirements
  
• Coordination and supervision of design-build contractors
  
• Coordination with internal stakeholders and subject matter experts
  
• Oversight of physical construction activities
  
• Participation in commissioning
  
• The management of close out and hand-off of physical data center and project documents to customer
  
• Collaborate with the design team, operators, and clients.
  
• Submit monthly project financial reporting, including forecasting, cash-flow, etc.
  
• Review monthly contractor billing and perform job walks to substantiate progress.
  
• Keeps all relative parties informed of progress throughout the life of the project.
  
• Develop, manage, maintain, and assist with contract negotiation of new and existing vendors.
  
• Oversee RFI and Submittal Review Process.
  
• Manage the Change Order Process with Owner and Subcontractors.
  
• Manage input and delivery of work products from internal team members to ensure that new data center spaces comply with the project requirements, customer requirements, all engineering standards, applicable codes, and specifications.
  
• Understand project budget/estimate and budget set-up.
  
• Develop and understand trade contractor and supplier contract scopes, with a constant focus on procurement and lead-time of materials to maintain schedule.
  
• Develop, document, and drive lessons learned, process improvements, cost, and schedule savings initiatives throughout the project lifecycle.
  
• Work closely with the proposal team to coordinate design criteria with budgetary issues and ongoing maintenance and operation of existing facilities.
  
• Awareness of the importance of mission-critical facility operation
  
• Safety standards knowledge and enforcement. (OSHA 30 Hour preferred)
  
• *Schedule shifts may incl nights/weekends as per bell curve requirements
  
• Additional duties may be assigned as project needs adjust at Management's discretion.
  

QUALIFICATIONS:

Education/Experience (Desired):

• 
  
• Bachelor of Science in Construction Management, or a similar field, or equivalent experience
  
• Construction/Engineering/Architectural degree a plus
  
• 5-7 years of experience in managing construction projects required
  
• Datacenter experience is preferred
  
• Experience in CSA (civil, structural, architectural) and MEP (mechanical, electrical, plumbing) construction management is a requirement.
  

Computer Skills:

• 
  
• Competency in Microsoft Office applications, including Word, Excel, Outlook, and Teams
  
• Proficient in PROCORE
  

Certificates and Licenses:

• 
  
• No certificates or licenses required
  

Supervisory Responsibilities:

Supervise one or more Superintendent or Project Coordinator or Assistant Project Manager

Travel Required: 30-50%

Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

Health Benefits - (Medical, Dental & Vision Insurance)

Flexible Spending Account Options

401K Plan

Employer paid Life & Disability Insurance

Paid Time Off

Employee Referral Program

Employee Assistance Program (EAP)

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

About Diversified:

Diversified is a global leader in audio visual and media innovation, recognized for designing and building the world's most experiential environments. Our award-winning team specializes in delivering solutions for the most complex, large-scale and immersive installations. Serving a global clientele that includes major media organizations and retailers, sports and live performance venues, corporate enterprises, and government agencies, Diversified partners with clients to create spaces that bring people together and keep them coming back.

What to Expect:

At Diversified, we're on a mission to create a world without boundaries, where technology enables all people to connect and experience the moments that matter, wherever they choose to be. With clients spanning the globe and an exciting pipeline of projects across industries, Diversified offers more than just a job. We offer a career path with the flexibility to grow personally and professionally, wherever your ambitions take you.

As a Diversified associate, you'll dive headfirst into big, complex, and rewarding projects that push the boundaries of what's possible. Plus, you'll enjoy a flexible work environment, competitive compensation and benefits, and a culture that celebrates diversity and inclusion.

IF YOU CAN DREAM IT, YOU CAN DO IT AT DIVERSIFIED.

How You'll Contribute:

This full-time (40hr./wk.) position is responsible for the safe and timely transportation and delivery of equipment and materials as needed between Diversified warehouses and client job sites. Additionally, this position is responsible for the day-to-day activities of the warehouse. This position is accountable for the warehouse's inventory accuracy, organization, and control of incoming shipments, as well as the timely, properly documented execution of outgoing shipments, including RMAs. The position entails a service-oriented approach; proactively supporting local and global project teams with all warehouse activities is required, as well as the ability to collaborate and communicate with a variety of other departments and warehouses.

Warehouse location: Sterling VA

What You'll Do:

• 
  
  
• This position is required to deliver products and materials to job sites and between buildings.
  
  
• Ensure that outbound shipping requests are processed in a timely manner and in accordance with project specifications, as well as Diversified
  shipping and inventory control procedures. Confirm all documentation and data entry is complete and accurate before releasing the shipment.
  
  
• Maintain a safe and clean warehouse facility: breakdown boxes and control waste; store shipping pallets and other warehouse materials and equipment; follow procedures and inventory control processes; comply with safety policies.
  
  
• Unload and receive deliveries: process receipt and/or electronically log all incoming packages, based on disposition. Qualify equipment/materials and store according to warehouse layout and project specifications.
  
  
• Maintains inventory of shipping materials and supplies utilizing RF/ Scan Gun
  
  
• Performs all computer functions necessary to track various aspects of goods.
  
  
• Unpacks, examines, and routes incoming shipments, rejects damaged items, records shortages, and corresponds with shipper to rectify damages and shortages. Receives and processes all defective parts returned for replacement or credit.
  
  
• Weigh, and label outbound shipments, including small package and freight shipments. Recommend cost-effective shipping procedures to staff
  members. Call for couriers in response to staff requests and notify appropriate project teams when incoming courier correspondence is received.
  
  
• Reports defective materials or questionable conditions to the department supervisor
  
  

What You'll Bring:

Required Skills/Qualifications:

• 
  
  
• 1+ years of experience as a delivery driver; box truck experience preferred.
  
  
• A valid driver's license and a good driving record.
  
  
• Possession of a valid Medical Examiner's Certificate (Federal DOT MEC).
  
  
• Must be able to obtain clearance through the DOT Federal Motor Carrier Safety Administration.
  
  
• Ability to read, write and speak English, follow verbal instructions, and use simple math.
  
  
• Ability to work a flexible schedule including arriving at warehouse at 5:00 -6:00 AM for early delivery
  
  
• Ability to maintain accurate records of trips, inspections, and HOS logs for compliance and audits.
  
  

• 
  
  
• Ability to safely handle a 26' box truck in the DC/NYC environments.
  
  
• Organizational skills applicable to loading & unloading trucks.
  
  
• Knowledge of how to strap/secure loads within a truck for transport.
  
  
• Ability to follow GPS driving instructions
  
  

What We Offer:

Along with competitive compensation, you will be eligible for the following benefits:

• 
  
  
• Multiple medical plan options to suit your family's needs
  
  
• Dental (including orthodontic coverage) and vision plans
  
  
• Company paid Basic Life, AD&D, Short-Term and Long-Term Disability Insurance, and Employee Assistance Plan (EAP)
  
  
• Healthcare and Dependent Care Flexible Spending Accounts (FSA)
  
  
• 401k with Employer Match
  
  
• Paid Time Off and Paid Holidays
  
  
• Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident Insurance, Pet Insurance, Homeowners and Auto Insurance, Supplemental Term and Dependent Life and AD&D, and Legal Services
  
  
• Commuter Benefits
  
  
• And much more
  
  

To learn more about becoming part of the Diversified team, visit us at our career siteor email us at .

Diversified is an equal opportunity employer committed to fostering an inclusive and diverse workplace. All aspects of employment will be based on job requirements, individual qualifications, merit, performance, and business need. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other protected characteristic under applicable law. We believe in fair and equitable hiring practices and strive to create an environment where all individuals feel valued and empowered.

If you require a reasonable accommodation to participate in the application or interview process due to a disability, please contact so we can assist you.

Our compensation ranges reflect the cost of labor across several US geographic markets. The pay details below range from our lowest geographic market up to our highest geographic market. Pay is based on several factors including market location and may vary depending on job-related knowledge, skills and experience depending on the position offered, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits.

• 
  
• Schedule subcontractors, consultants, and vendors in critical path to ensure timely completion.
  
• Perform quality control duties and responsibilities regarding the work being performed.
  
• Communicate with project team regarding ASI's, RFI's, and Material Submittals.
  
• Ensure that subcontractor is fully executing and complying with his contracted scope of work.
  
• Coordinate required inspections with local jurisdictions.
  
• Identify subcontractor non-compliance with safety, health, and environmental quality standards.
  
• Identify conflicts in construction progress and communicate them to project team for resolution.
  
• Maintain daily log (written) of activities on the jobsite.
  
• Ensure subcontractor has corrected all deficiencies identified by project team.
  
• Walk all units on project daily to monitor activities and assist in future planning.
  
• Preside over weekly subcontractor meetings designed to coordinate the work.
  
• Issue notices of non-compliance to subcontractors regarding quality of work or scheduling.
  
• Ensure that the job site is always kept in a clean and organized manner.
  
• Perform job progress and completion punch list identification and completion.
  
• OSHA 30- ability to pursue CHST & CSP
  
• Competent person excavation and trenching
  

• 
  
• Assist with the battery replacements and new installations.
  
• Assist, as necessary, with preventative maintenance of batteries with minimal disruption to customer.
  
• Assist in the warehouse when needed.
  
• Interact effectively with internal and external customers.
  
• Follow operational, maintenance and emergency methods of procedure (MOPs)
  
• Ensure strict adherence to critical facility work rule and safety procedures.
  
• Ability to use hand and general maintenance tools and equipment.
  
• Keep job site clean during replacement, installs, and maintenance.
  
• Assist with work in other service divisions (Switch Gear, Operations, HVAC, etc.) as needed.
  
• Work from schematic diagrams, sketches, and verbal instructions.
  
• Learn how todisconnect and connectsealedbatteries in cabinets and open racks.
  
• Learn how to build flooded cell batteryracks, and spill containment systems.
  
• Learn how to install flooded cell batteries onto rack systems in thecustomerscritical space.
  
• Learn how to enter pre-installation test readings into our reporting format thru laptop computer.
  
• Learn how to collect data from PM services and importinto files for reporting purposes.
  
• Gain experience from preventive maintenance, trouble diagnosis, routine and emergency maintenance and repairs with minimum direct supervision to DC batterysystems
  
• Regular and reliable attendance is an essential job function.
  
• Other duties as assigned by Services Management.
  
• Travel approximately 30% or more
  

• 
  
• Must be a US citizen
  
• Able to obtain security clearance is preferred
  

• 
  
• High School Diploma
  
• Clean driving records a must
  
• Safe operation of department equipment
  
• Elementary fix/repair techniques based on directed supervision
  
• Knowledge of or ability to learn basic AC/DC theory, electronic components, and electronic circuitry
  
• Complete training on:
  
• Use of Digital multimeter for AC and DC diagnostic measurements
  
• Use of Amp Clamp and flexible CT in DC and AC measures
  
• Use of AlberCellcorderfor use as a battery testing and maintenance tool for a multitude of various battery designs and chemistries
  
• Show understanding of proper use of:
  
• Isolation devices to control available voltage potentials.
  
• Necessary use of Arc-Flash suit and PPE.
  
• Show competency in the connections of series, parallel, and series-parallel battery strings.
  
• Understand torque values, torque-mark application, and visual inspection of completed battery cabinet installations.
  

• 
  
• Proficient knowledge of Microsoft Office including: Word, Excel.
  

• 
  
• OSHA 10-hour certification
  
• NFPA-70E Safety Training
  
• Supervisory Responsibilities:
  

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  
• CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.