Jobs in Dearborn, MI

Do you want to become a surrogate? We are now offering a sign on bonus to all qualified and matched surrogates that sign contracts. The first step is to fill out our surrogate application. A fertility specialist will contact you to continue the process. For intended parents interested in surrogacy to start or grow their families please contact us today. The surrogacy process is complex, but we will be with you every step of the way. Call today to get started.

Women who may have the ability to produce eggs but are unable to use their uterus or do not have a uterus, may consider a surrogate. A donated egg may also be used with the surrogate in the event a woman cannot produce her own eggs or her uterus is not intact or insufficient to carry a pregnancy. In either case, the husband's sperm, if viable, may be used.

Using an egg donor unrelated to the surrogate carrier eliminates any biological tie. The egg of the surrogate is never used as part of the assisted reproduction process, so that a surrogate is never in the position of delivering her own biological child.

The basic requirements of a woman to serve as a surrogate are:

• Emotionally stable
• Responsible
• In good physical health
• Non-smoker
• Has had at least one successful pregnancy
• Is capable of carrying a child to full term

A woman is not required to fall within a particular age range to serve as a surrogate, but most intended parents prefer a surrogate under the age of 40. For more information on surrogacy please see the documents on the left side of this page.

In Texas, there is a judicial process for validating the Gestational Contract (the contract between the intended parents and the surrogate). Included within the various requirements for having a Gestational Contract validated by a Texas court is that the intended parents must be married and the surrogate must have previously carried a child to term. Additionally, there are residency requirements that apply to either the surrogate or the intended parents, but not both.

Compensation for a surrogate services generally starts in the range of $35,000 - $40,000, for base compensation with over all fees up to 70k, in many cases. The amount of compensation is dependent upon a variety of factors, including, but not limited to, whether the surrogate carries twins, what procedures a surrogate is required to undergo and whether the delivery is vaginally or by cesarean section.

Angstrom Group of Companies is a leading Tier 1, full-service supplier providing high-quality solutions to automotive and industrial original equipment manufacturers (OEMs). Angstrom offers a diversified product portfolio with vertically integrated manufacturing capabilities. Angstrom has 30+ manufacturing locations across North America, South America, and Europe. Core manufacturing units process Metals (Casting, Stamping, Forging, Welding, Machining, and Assembly), Resin (Injection Molding, Foam, and Fiber), and Electrical components (Wire Harnesses, Lighting, and assembly modules).

Minimum of 4 years of actual on-the-job experience ( no internship or fresh graduates)

RESPONSIBILITIES:

AME leads new projects right from the inception of the program till manufacturing launch, which includes prototype part development, APQP, manufacturing process planning, FMEA, selection of equipment, tooling design, developing infrastructure, conducting trial production, installation of manufacturing cell, executing PPAP, proving Run Rate, monitoring initial production run, and sign off from production. Implement advanced manufacturing techniques in existing production processes to maximize throughput / OEE. Resolves issues with design, manufacturability, or build sequences.

• Develop new product process design, PFD, FMEA, and prepare manufacturing equipment proposals to execute project deliverables in coordination with the Cross Functional Team
• Develop and execute prototype plans as per customer requirements.
• Recommend new manufacturing equipment by identifying vendors, evaluating equipment capabilities, service history, and service support. Secure buy-off from the CFT team.
• Ensure that sourced equipment and tooling meet established standards and project requirements
• Lead pre-production activities in coordination with the production department
• Lead PPAP and Run Rate to meet project deliverables
• Inputs and configures BOM’s, routing and master data to the ERP system.
• Develop process drawings, manufacturing instructions, control plan and work instructions for new products, machining, welding, assembly fixtures, and tooling
• Develop financial evaluations of potential major capital investment projects and provide documentation of investment vs payback to the superior.
• Coordinate manufacturing changes for the approved Engineering Change Request
• Evaluate existing methods of operations, routings, processes, tooling, etc., and recommend and/or initiate changes or modifications to update and achieve optimum operating efficiencies and manufacturing economies.
• Develop and manage plant layouts, CAD drawings, and operational design concepts
• Install and conduct equipment capability and certifications with the help of maintenance
• Coordinate and conduct new project PDT meetings with the customer and supplier.
• Application of lean concepts and capacity planning
• Application of error-proofing techniques
• Periodic review of process capability studies and initiate action to reduce FMEA / RPN
• Identify and address safety and ergonomic issues, as identified.
• Keep regular communications, periodic meetings with program management on new program awards, and the status of awarded programs
• Support Sales on RFQs, cost estimation, and technical presentation to seek new business
• Do participate in corrective preventive actions for customer and internal complaints
• Must be able to take the production engineer role in case new project activities are completed

QUALIFICATION AND KNOWLEDGE:

• Associate Diploma or Degree in Industrial / Mechanical / Manufacturing Engineering required
• Minimum of 4 years of actual on-the-job experience ( no internship or fresh graduates) in Engineering, product development, manufacturing in Automotive and/or Automotive Supply base
• Must have process experience in Machining, Welding (MIG, TIG), Robotic welding, Press Assembly, Fixture, Automation and cutting tools knowledge required
• Adequate knowledge of Problem-Solving methods, SPC and SQC tools required
• Auto CAD, Solid Works skill set
• Highly knowledgeable in APQP process, PPAP, PFMEA, PFD, Control Plan and WI
• Knowledge in GD&T and Lean manufacturing
• Knowledge in International Quality Management System - IATF 16949:2016/ISO 14001 /OHSAS and State Law in Industrial Regulations
• Proven ability in execution of project plans that have achieved the identified targets
• Understanding safety procedures and ability to work in a manufacturing environment
• Must be able to train, assist, lead, direct, instruct and discipline employees
• Strong sense of time management and urgency
• Ability to manage, navigate unexpected challenges with a focus to rapidly find solutions

PHYSICAL REQUIREMENTS:

• Sitting, squatting, walking, bending 8 –10 hours per day
• Must be able to lift 50 lbs. or more.
• Must be able to work in different weather conditions
• Exposure to production environment

WORK ENVIRONMENT:

• This role functions in a welding, assembly and machine shop environment
• This role routinely uses standard and special purpose equipment such as CNC machines, robots, welding, assembly fixtures and tools
• Technicians often work in assembly lines or automated production floors

SAFETY REQUIREMENTS:

• Must wear Personal Protective Equipment when in a production area

Angstrom NA LLC is an Equal Opportunity Employer. Employment at Angstrom NA LLC is governed by merit, qualifications, and professional competence. Angstrom NA LLC does not discriminate against any employee or applicant because of race, creed, national origin/ethnicity, color, religion, gender identity/expression, sexual orientation, marital status, age, veteran status, disability status, genetic information, pregnancy or related conditions, or any other basis protected by law.

Applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department.

Kelly Services is recruiting an Inventory Management Specialist. The role will be in Detroit, MI.

Our customer, DePuy Synthes, part of the Johnson & Johnson Medical Devices Companies, provides one of the most comprehensive Orthopedics portfolios in the world. DePuy Synthes solutions, in specialties including joint reconstruction, trauma, craniomaxillofacial, spinal surgery and sports medicine, are crafted to advance patient care while delivering clinical and economic value to health care systems worldwide.

Commercial Operations and Strategic Enablement is the conduit between the business and the sales organization, enabling sales growth objectives through ensuring appropriate resources are available and balanced throughout the US market. The Sales Network Optimization team minimizes cost to serve while prioritizing customer service levels – allowing the fulfillment of current demand and enable new business.

For more information about the inventory, visit

For more information about the technology, visit Responsibilities

• Manage order fulfillment of exception-based orders coming from the field sales teams including close connection with Courier Service, receiving parties and internal clients
• Proactively solve backorders from our central Distribution Center in partnership with the field sales team to determine which ones need to be fulfilled by the Field Sales Location
• Manage warehouse inventory via close coordination with our central DC
• Perform in bound product verification and put away process for inventory products including, but not limited to the following: scanning inventory, completing inventory transfers in SAP, etc.
• Train and follow standard operation and quality procedures and work instructions
• Performing cycle count and inventory reconciliation activities
• Assists in regular inventory inspections and performs safety and quality audits
• Adherence to training requirements, and health and safety regulations
• Wear protective clothing and equipment as required
• Implement schedule / policies / and group guidelines
• Lead projects as required
• Flexible to other tasks as priorities shift
• Responsible for GDP (Good documentation practices)

Qualifications:

Education:

• Minimum High School and/or equivalent degree
• Bachelor's Degree (a plus, but not required)

Experience and Skills:

Required:

• 2-4 years of relevant work experience
• Inventory / Warehouse Management Software experience
• Experience preferred within any of the following areas: distribution, manufacturing, logistics, supply chain, customer service
• Demonstrated initiative, creativity, assertiveness, and proactive communication
• MS Office Suite proficiency preferred, including (Word, Excel, PowerPoint, and Outlook) Knowledge of Warehouse Management Systems
• Strong Communication skills
• Strong computer skills and ability to utilize specialized software and customized programs to meet business needs
• Flexibility to work a staggered work schedule covering Monday thru Sunday shifts
• Willingness to accommodate changes in the schedule including working in other shifts as per operational needs is required (late or early start)
• Knowledge of Good Manufacturing Practices (GMP) or Good Practices (GxP)

Additional Information:

Kelly Services is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against based on disability.

LabCorp is seeking a Clinical Laboratory Supervisor to join our team at Henry Ford St. John Hospital in Detroit, MI

Work Schedule: Monday - Friday 10:30pm - 7:00am

Job Responsibilities:

• Supervise the day to day operations of the Core Laboratory departments
• Ensure laboratory tests are accurately performed and results are reported in a timely manner
• Directly supervise, train, and mentor laboratory personnel of the department
• Monitor daily workflow in the lab and schedule adequate assay coverage
• Responsible for ensuring all shifts in the department are properly staffed
• Research and resolve any production errors while escalating when necessary
• Engage in continuous process and service level improvements
• Ensure all equipment is being properly maintained through Quality Control
• Prepare and maintain Quality Assurance records and documents
• Evaluate new process improvements and make appropriate recommendations
• Meet regularly with direct reports to provide coaching and feedback for their development
• Perform bench work as needed and maintain proficiency/competency in technical operations
• Ensure all work is in accordance with state and Federal regulations
• Responsible for administering and managing policies and procedures
• Process and maintain payroll and personnel files, and administrative duties as needed

Minimum Qualifications:

• Bachelors degree in a Chemical or Biological science, Clinical Laboratory Science, Medical Technology
• 2 years or more of experience as a Technologist/Technician within core lab
• ASCP or AMT certification

Preferred Qualifications:

• 1 year or more of laboratory leadership experience

Additional Job Standards:

• In lieu of education requirements listed above, non-traditional degrees with applicable science credits that meet CLIA standards may meet education requirement
• Strong working knowledge of CLIA, CAP and relevant state regulations
• Understanding of laboratory operations as well as policies and procedures
• Proficient with Laboratory Information Systems and Microsoft Office
• Strong communication skills; both written and verbal
• High level of attention to detail with strong organizational skills
• Comfortability making decisions in a changing environment
• Ability to handle the physical requirements of the position

Are you an experienced clinical laboratory professional looking for leadership opportunity? Are you detail oriented, process focused, and enjoy leading others? Are you looking for an industry leading company that offers growth and stability? In this position, you will work in a fast paced, customer focused, and challenging environment, and will be a part of our overall mission at LabCorp: "Improving Health, Improving Lives".

This position has a $10,000 sign on bonus. (External candidates only.)

Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. Employees who are regularly scheduled to work a 7 on/7 off schedule are eligible to receive all the foregoing benefits except PTO or FTO. For more detailed information, please click here.

If you're looking for a career that offers opportunities for growth, continual development, professional challenge and the chance to make a real difference, apply today!

HOMECARE Operations Manager

Full Time; Permanent

Bingham Farms, Michigan

Healthcare Recruiters International is seeking a hands-on Operations Manager in homecare who leads by doing. This is a working role, not a desk-only position. This position will manage daily operations, support the team, and hold them accountable, and will work for an established home care agency.

Key Responsibilities

- Ensure daily shift coverage and scheduling

- Handle client and caregiver communication

- Support onboarding, training, and accountability

- Maintain documentation, payroll, and billing accuracy

- Improve systems and processes

Ideal Candidate – Qualifications:

- Hands-on leader who thrives in fast-paced environments

- Organized, reliable, and process-driven

- Confident communicator and problem-solver

- 2+ years of operations or leadership experience in homecare

Compensation:

Salary: $68,000+ per year + Quarterly Bonuses

Benefits: Medical, Dental, Vision, 401(k) with Match, PTO

Project description

We are looking for a skilled and detail-oriented Hardware Technician to join our engineering support team. This role is primarily responsible for the installation, configuration, and maintenance of hardware test benches used in product development and validation processes.

Responsibilities

Install, wire, and set up hardware test benches according to engineering requirements and safety standards

Perform regular maintenance, troubleshooting, and repairs on test bench components

Assist engineering teams with hardware integration, diagnostics, and test setups

Maintain inventory of tools, components, and test equipment

Document procedures, configurations, and maintenance logs accurately

Support calibration and functional verification of test systems

Ensure compliance with lab safety protocols and cleanliness standards

Skills

Must have

Associate's degree or certification in Electronics, Electrical Engineering Technology, or a related field

2+ years of experience in hardware setup or lab support environment

Hands-on experience with wiring, soldering, and using diagnostic tools (e.g., multimeters, oscilloscopes)

Familiarity with automotive or electronics test environments is a plus

Strong attention to detail and problem-solving skills

Ability to work independently and in cross-functional teams

Midwest Steel is the nation’s leading Structural Steel contractor with a history of stability and success, building projects in a variety of industries nationwide. The Company is headquartered in Detroit, MI and is involved in the construction of complex distribution centers and structures across the country. Some of the customers served by Midwest Steel include Fastenal, Nestle, H.E.B. Grocery, Peterbilt and First Quality.

The Project Engineer Position

The Project Engineer position will work on various steel mill projects throughout the Metro Detroit area. This position is responsible for a wide range of duties including ordering and securing materials and deliveries, tracking quantities, quality control, preparing and sending internal and external submittals, handling critical communications, and helping the Project Managers and Superintendents in all areas where support is needed.

In this role, the Project Engineer needs to solve problems quickly and efficiently, provide consistent verbal and written communications, and have the drive to work hard to keep the project on track. The ideal candidate has an interest in construction and thrives in a fast-paced, detail-oriented, environment. This position offers someone with interest in the construction industry an opportunity to gain hands-on experience.

Experience, Skills, and Abilities of the Project Engineer

• Bachelor’s degree preferred
• Construction Experience is preferred, not required
• Advanced proficiency with Microsoft Excel
• Working knowledge of Procore and other construction and/or engineering software programs is a bonus

Compensation, Benefits, and Structure for the Project Engineer

This is a full-time, permanent position with a competitive compensation, profit sharing (bonus) program based on Company success, 100% employer-paid benefits (including full benefits for employees and dependents!), 401k, paid time off, and a strong Company culture.

The Recruitment Process for the Project Engineer

The recruitment process is designed to be a thorough, two-way evaluation to ensure that the best decision is made by both the Company and the candidate. Given this, multiple steps are required, including a phone interview, in-person interviews, candidate assessments, and a pre-employment background check and drug test.

Midwest Steel, Inc. is an Equal Opportunity Employer!

Provide technical excellence and frontline customer support for precision testing systems used across manufacturing, R&D, and quality control industries. This role exists to ensure every installation, service, and calibration is executed to the highest standard — protecting the company’s reputation for quality and empowering clients to succeed.

You are the face of the organization in the field: part technician, part trainer, and part problem-solver. Your work keeps vital material testing systems operating safely, accurately, and efficiently.

Install & Commission Equipment: Independently install, configure, and calibrate custom material testing machines at client facilities, ensuring systems meet operational specifications.

Diagnose & Resolve Issues: Troubleshoot and repair complex electro-mechanical systems — including electrical (up to 480V), hydraulic, and pneumatic components — using schematics and mechanical drawings.

Deliver First-Visit Resolution: Resolve customer issues efficiently and accurately on-site, minimizing repeat service calls and downtime.

Customer Training & Support: Train operators and maintenance staff on system operation, calibration, and software, ensuring confident and safe equipment use.

Autonomous Field Operations: Manage personal travel, scheduling, and reporting with minimal supervision while maintaining high levels of professionalism and responsiveness.

Continuous Improvement: Capture and report system issues or recurring trends to internal engineering teams, contributing to product and process improvements.

• Independent problem-solver who thrives on travel, autonomy, and variety
  

• Calm under pressure with strong diagnostic and technical reasoning skills
  

• Confident communicator who can train and build trust with customers
  

• Committed to quality, professionalism, and first-time resolution
  

• Adaptable — comfortable managing both electrical and mechanical challenges in the field
  
  

This position is built for the self-reliant technician — someone who takes pride in precision, thrives on travel, and enjoys solving complex challenges head-on. You’ll represent a globally respected brand in advanced testing systems, ensuring customers experience excellence from installation to ongoing support. Every visit is an opportunity to lead, teach, and uphold technical integrity.

• Must have served in the U.S. Army, U.S. Navy, U.S. Marine Corps, U.S. Air Force, U.S. Coast Guard, U.S. Space Force, U.S. Reserves, or U.S. National Guard.
  

• 2+ years of field service experience in electro-mechanical, automation, or testing equipment (post-military experience required)
  

• Proficiency troubleshooting electrical systems up to 480V, including drives, relays, and PLC interfaces
  

• Experience with hydraulic and pneumatic systems
  

• Ability to read, interpret, and apply electrical schematics and mechanical drawings
  

• Valid driver’s license; ability to travel 90–100% (domestic, primarily regional)
  

• Excellent communication and customer interaction skills
  
  

• Medical, Dental, and Vision: 80% employer-paid premiums
  

• 401(k): 100% match on first 3%, tiered match up to 6% total contribution
  

• Annual Bonus: Up to $5,000, based on performance metrics
  

• Per Diem: $55/day for meals and incidentals
  

• Company Vehicle: Personal use permitted, fuel and expenses reimbursed
  

• Travel Expenses: Covered via company-issued reimbursement system