Engineering Jobs in Cooper City Florida Remote

The Broward County Board of County Commissioners is seeking qualified candidates for Engineering Unit Supervisor (Highway Construction and Engineering Division).

THIS JOB ANNOUNCEMENT WILL REMAIN OPEN UNTIL SUFFICIENT NUMBER OF APPLICATIONS ARE RECEIVED AND MAY CLOSE AT ANY TIME.



This position supports professionals responsible for managing capital and mobility advancement projects for Broward County's Highway Construction and Engineering Division. The ideal candidate will have experience coordinating with multiple entities, including municipalities, state agencies, and local authorities. Work involves the review, planning, and coordination of the design and construction of County capital and mobility advancement projects, including schedules, budgets, and staff assignments.

General Description
Performs advanced professional and supervisory engineering work in the design and review of a wide variety of engineering and environmental projects.
Works under administrative supervision, developing and implementing programs within organizational policies and reports major activities to executive level administrators through conferences and reports.
Minimum Education and Experience RequirementsRequires a Bachelor's degree from an accredited college or university with major coursework in civil engineering.

Requires six (6) years progressively responsible experience in professional engineering work related to roadway design and construction or closely related field, including two (2) years of supervisory experience.
Special Certifications and LicensesPossess and maintain Professional Engineer License in State of Florida for duration of assignment.

Preferences* Master's Degree in Civil Engineering, Public Administration or closely related field* Certified in the use of one (1) or more of the following engineering programs (i.e. ICPR, ASAD, HY-8, HEC-RAS, HEC-HMS, Synchro, HCS, IMSA), or similar
* Construction Training Qualification Program (CTQP) Certifications (Asphalt, Concrete, Earthwork, QC Manager, etc.)
* Professional Traffic Operations Engineer, Professional Surveyor & Mapper, General Contractor License, or similar
* Project Management Professional and/or Certified Public Manager
* Advanced Work Zone Traffic Control Training Certification
* At least ten (10) years of experience in design and construction of roadway/traffic projects
* At least five (5) years of experience in one (1) of the following specialized fields of engineering: Traffic Operations, Structures, Drainage, Geotechnical, Construction Management
* At least three (3) years of experience with MicroStation OpenRoads Designer (ORD)
* At least two (2) years of experience in governmental contract and procurement
* At least two (2) years of experience in the preparation of agenda items and/or resolutions

SCOPE OF WORK

The functions listed below are those that represent the majority of the time spent working in this class. Management may assign additional functions related to the type of work of the job as necessary.

Schedules, assigns, and supervises engineering design projects; directs and coordinates field surveys, plan design, preparation and review, cost estimate development, and specifications preparation; participates in the development and design and review of major and complex projects.

Supervises and participates in the analysis and review of engineering studies and designs prepared by professional consultants; prepares recommendations for the consideration of professional and administrative superiors and committees.

Supervises the preparation of right-of-way and construction plans for major thoroughfares; conducts studies and prepares reports on proposed locations for future major thoroughfares; maintains liaison with appropriate outside agencies concerning projects under consideration for construction.

Supervises and participates in the activities of construction engineers, inspectors, and materials technicians in the investigation and construction of water and sewer mains, roadways, structures, and related public work projects; prepares general and special specifications for contract construction; supervises the maintenance and analysis of payment estimates and records.

Oversees and performs the technical review of remedial action plans; oversees and administers environmental licensing programs.

Conducts special engineering studies and projects relating to technical and administrative aspects of the public works function; coordinates the utilization of computer technology as related to the engineering function.

Conducts long-range studies involving other departments, agencies, and organizations; prepares reports and recommendations; seals and signs engineering plans, drawings, and documents.

Performs related work as assigned.

Physical Demands

Physical demands refer to the requirements for physical exertion and coordination of limb and body movement.

Performs sedentary work that involves walking or standing some of the time and involves exerting up to 10 pounds of force on a regular and recurring basis or sustained keyboard operations.

Unavoidable hazards refer to the job conditions that may lead to injury or health hazards even though precautions have been taken.

Involves routine and frequent exposure to traffic; moving machinery.

Competencies

• Manages Complexity

• Decision Quality

• Balances Stakeholders

• Directs Work

• Plans and Aligns

• Optimizes Work Processes

• Ensures Accountability

• Builds Effective Teams

• Communicates Effectively

• Situational Adaptability

• Collaborates: Building partnerships and working collaboratively with others to meet shared objectives.
• Customer focus: Building strong customer relationships and delivering customer-centric solutions.
• Instills trust: Gaining the confidence and trust of others through honesty, integrity, and authenticity.
• Values differences: Recognizing the value that different perspectives and cultures bring to an organization.

A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.

Description

The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.

Job Duties:

Specific duties will include:

SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.

Requirements Analysis/Review for test-ability

Test procedure development, implementation, execution and failure root cause analysis.

Test planning and preparation.

Assess System performance against requirements

Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.

Develop and refine system and board level test cases and procedures.

Trouble shoot subsystem and system level failures to root cause.

Design test fixtures & cables to enable testing.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).

Trouble shoot subsystem and system level failures to root cause.

Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.

Interpret test requirements and electrical test results.

Read electrical schematics.

Test planning, preparation & execution

Required Qualifications:

3 to 5 years of experience

Strong interpersonal skills

Strong analytical skills

B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired

Will consider equivalent years of relevant experience in lieu of a formal degree

Experience working with or developing Automated Test Equipment (ATE).

Experience in hardware and test equipment troubleshooting experience.

Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand

Can operate independently

Desired Skills:

Excellent verbal and written communication skills.

Experience working independently and in a collaborative environment

Ability to react to project adjustments and alterations promptly and efficiently

Ability to effectively prioritize and execute tasks in a high-pressure environment

Familiarity with electronic components and common electronic test equipment.

Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads

Ability to interpret test requirements and electrical test results.

Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.

Experience with GIT, Tortoise SVN, or equivalent software configuration management tools

Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.

Previous experience with programming languages such as C, C++ & C#.

Previous experience with Visual Studio.

Compensation:

This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.

Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

We are seeking a skilled Chemical Engineer to design, analyze, and optimize pharmaceutical manufacturing processes. The role involves leading process improvement and development projects, resolving complex technical and operational challenges, and ensuring compliance with Good Manufacturing Practices (GMP), quality standards, and regulatory requirements. The ideal candidate will have strong technical expertise, project management experience, and a continuous improvement mindset.

Shift / Working Hours

• Hours: 8:00 AM – 5:00 PM Mon- Fri

Key Responsibilities

• Analyze, design, and optimize pharmaceutical manufacturing processes (e.g., formulation, mixing, granulation, coating, sterilization)
• Lead process improvement and development projects from concept through implementation
• Apply structured problem-solving methodologies (Root Cause Analysis, 5 Whys, Fishbone, FMEA) to address deviations and operational issues
• Drive process improvement initiatives focused on yield, efficiency, robustness, and scalability
• Collaborate with Production, Quality, Validation, Engineering, Maintenance, and R&D teams
• Ensure all process changes comply with GMP, regulatory requirements, and quality standards
• Develop, review, and maintain process documentation, SOPs, batch records, and technical reports
• Support process validation, revalidation, and technology transfer activities
• Analyze process data and KPIs to drive continuous improvement and risk reduction
• Lead or support CAPA investigations related to process deviations, non-conformances, and OOS results
• Participate in internal and external audits (FDA, EMA, local authorities)
• Train manufacturing and technical personnel on process changes and best practices

Required & Preferred Qualifications

Education

• Bachelor's degree in Chemical Engineering
• 5–10 years of experience in chemical engineering, process improvement, or pharmaceutical manufacturing
• Proven experience in process development and project execution
• Strong technical problem-solving and root cause analysis skills
• Experience supporting validation and regulatory inspections preferred

Technical Knowledge

• Pharmaceutical manufacturing processes and unit operations
• GMP / cGMP, FDA, EMA regulations
• Process validation, scale-up, and technology transfer
• Risk management tools (FMEA, HACCP)
• Statistical analysis and process capability (Cp, Cpk)
• Process data analysis tools and advanced Excel

Apply now

Molding Process Engineer

Job Description

About Company

At Ennovi we harness the power of two megatrends - electrification and AI - to help industries innovate at speed, operate smarter, and achieve sustainable growth. By combining these transformative forces with our global reach and best talent, we empower our customers to lead their markets and drive sustainable progress.

From automotive to aerospace, consumer electronics, data storage, industrial, and medical markets, we help our customers achieve these megatrends by creating smarter, safer, and more sustainable solutions.

We excel in developing high-performance, custom solutions that meet diverse technical needs, solve unique challenges, optimize performance, and adapt to evolving market demands.

Our mission is to get customers to the future faster, from anywhere. Headquartered in Singapore, ENNOVI has a global presence across North America, Europe, SEA and China, where all its activities are socially responsible, with minimal environmental impact. Learn more at Join Us

At Ennovi, we envision a future of electrification and innovation and strive to create an inspiring workplace where our employees are integral to shaping that future. We offer a dynamic, collaborative and inclusive culture that encourages continuous learning, professional growth, and a sense of purpose. As a part of the Ennovi team, employees experience the excitement of being at the forefront of cutting-edge technologies and contributing to a sustainable future.

Our commitment to the transformation is epitomized by our five pillars: Speed, Innovation, Best Talent, Global Reach, and Sustainability. This entails navigating exponential market changes through agile structures, fostering innovation across all aspects of our business, strategically expanding our global footprint, championing sustainability initiatives and nurturing a winning team.

Privacy Policy

Ennovi is an equal opportunity employer in conformance with all applicable laws and regulations to individuals who are qualified to perform job requirements. The Company administers its personnel policies, programs, and practices in a non-discriminatory manner in all aspects of the employment relationship, including recruitment, hiring, work assignment, promotion, transfer, termination, wage and salary administration, and selection for training.

By applying to this job posting, you agree with and acknowledge our privacy policy.

Job Summary

We are seeking a Molding Process Engineer to join our team in the Medical Business.

The Molding Process Engineer reports directly to the Engineering Manager and will be responsible for the support of all internal moulding activities that include product development, validation, qualification and implementation of processes, methods and equipment. Strong process development capabilities are essential.

Ennovi Medical is your end-to-end customized solutions partner, empowering OEMs to harness AI-driven technologies and accelerate innovation for medical devices.

Main Responsibilities

• Develop, validate, and optimize injection molding processes for new and existing medical products.
• Collaborate with tooling, quality, and production teams to ensure robust mold designs and process capability.
• Lead root cause analysis and corrective actions for molding-related defects and process deviations.
• Support mold qualifications, including IQ/OQ/PQ protocols and documentation.
• Monitor and analyse process data to drive continuous improvement and reduce scrap and downtime.
• Specify and implement process controls to enhance molding performance.
• Maintain compliance with GMP, ISO 13485, and FDA requirements.
• Train operators and technicians on molding best practices and troubleshooting techniques.
• Participate in cross-functional teams for new product introductions and engineering changes.

Qualifications & Skills

• Bachelor's degree in mechanical, Industrial, or Plastics Engineering or equivalent (5 years in relevant experience)
• Minimum of 3 years of experience within a Plastics/Polymer processing
• Experience with functioning in a highly regulated environment
• Strong understanding of Polymer technology and test methods
• Strong written and verbal communication skills
• Demonstrated experience in manufacturing medical devices using various manufacturing technologies
• Excellent process development capabilities
• Experience and proficient with Data Analysis, Root Cause Analysis and Statistical Method Application.
• Six Sigma Greenbelt and Lean Process Background
• Experience working with insert molding
• RJG Master Molder certification or equivalent.
• Experience with automation and robotics in molding operations.
• Familiarity with ERP and MES systems.

Akkodis is seeking a HVAC Development Engineer for a Direct Hire job with a client in Fort Lauderdale, FL.

Salary Range: $87K/Annum to $92K/Annum; The salary may be negotiable based on experience, education, geographic location, and other factors.

HVAC Development Engineer:

• Establish validation Test Plans for HVAC units, Specifications, Reliability testing and perform the tests in lab per the established plan
• Support build of all IPM and FARR simulation models for the new and legacy products by providing necessary inputs
• Raise Engineering Change Requests (ECRs) and track their progress
• Create component specifications to support resourcing and procurement
• UL & AHRI Regulatory knowledge and application to products testing and specification (AHRI, UL, ETL)

Desired Qualifications:

• Bachelor's degree in Engineering disciplines (Mechanical / Mechatronics preferred)
• Experience with technical risk assessment tools (e.g., FMEA, DRBFM)
• Strong organizational & interpersonal skills
• Excellent oral and written communication skills
• Test prototypes and write reports to document results
• Develop specifications, detailing and assembly drawings for products and equipment

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at (61 or ().

Equal Opportunity Employer/Veterans/Disabled

Benefits offerings include but are not limited to:

• 401(k) with match
• Medical insurance
• Dental Insurance
• Vision assistance
• Paid Time Off

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

Company Description:

A world leader in water treatment solutions, IDE specializes in the development, engineering, construction and operation of desalination, water reuse, and industrial water treatment plants.

Duties and Responsibilities (at a minimum):

• Provide process engineering leadership and technical support to Operations and Maintenance, including training, troubleshooting, and optimization of plant performance.
• Provide process set points and operating recommendations and coordinate implementation with the Plant Manager and Chief Operator to optimize plant operation.
• Prepare and provide appropriate reports for the Plant Manager
• Achieving and stabilizing the required quality parameters of the final product water supplied to the customer
• Continuous monitoring (online) on the process and the production performance of the plant, using the control room monitors, online reports and online alarms
• Monitoring the performance of the membranes by using periodic and continuous reports of short and long-term trends
• Daily, weekly and monthly reports to the various authorities
• Developing process monitoring tools, including daily, weekly and monthly process performance reports. Identify trends and problems, and defining the right solution
• Managing weekly meetings to identify process problems and defining solutions
• Availability 24 hours a day 7 days a week to provide immediate instructions to the control room
• Participate in the review, formulation and implementation of an Annual Operations Plan
• Participate in the review, formulation, implementation and achievement of an 'Annual Budget' and ensure its consistency with the 'Annual O&M budget plan'
• Participate in the provision of an accurate and representative progress report against the achievements of the 'Annual Operations Plan'
• Participate in the selection and recruitment procedure where appropriate
• Demonstrate commitment to the principles of 'Continuous Improvement'
• Participate in the identification and implementation of initiatives that will result in performance improvements
• Participate in the continuous development of systems, procedures and where appropriate 'Standard Operations', for all recurring activities
• Participate in the development and publication of statistical data and reports to the plant owners and the company
• Keep abreast of changes in the process and make recommendations as appropriate
• Ensure that all operations in your work are carried out in compliance with current Health and Safety Regulations.
• To ensure that all \"Waste Disposal\" procedures are carried out in accordance with current statutory requirements
• Generate work instructions and operating guidance for new or modified processes and distribute to the Plant Manager, Maintenance Manager, and Chief Operator.
• To undertake other such duties which may arise from time to time and are consistent with the nature of the position of your responsibility.

Reporting Line: Directly to the Plant Manager

Personal Attributes:

• Effective communication skills both written and spoken
• Good analytical and problem-solving skills
• Work successfully as a team member or independently
• Commitment to quality of work and company goals
• Enthusiastic to learn new systems and processes
• Willingness to lend your efforts wherever needed
• Effectively perform in stressful situations
• Complete work within assigned timeframe

Physical Demands:

• Ability to lift up to 50lbs and over 51lbs with assistance
• Ability to sit, stand, bend, crouch, kneel, climb, balance, push/pull, and walk for long periods of time
• Ability to enter and exit small, confined spaces
• Finger dexterity to work keyboard or operate tools, grasp tools and carry objects
• Ability to see in the normal range of vision with or without correction sufficient to read computer screens, documents, dials, gauges, meter-reading equipment, and operate motor vehicles and equipment
• Hear in the normal audio range with or without correction

Environmental Conditions:

Industrial environment working both indoors and outdoors continuously around:

• Loud noise
• Dust
• Heat
• Salt and fresh water
• Uneven, rough or slippery surfaces
• Hazardous chemicals in solid, liquid, and vapor form
• Toxic materials
• High and low voltage electricity
• Equipment under high pressure
• High speed rotating equipment
• Heavy equipment
• Heights above 5 Feet

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

We're growing fast and we want you to grow with us! We're expanding our engineering organization dramatically to meet exciting customer demand, and we're actively looking for engineers who bring strong foundational skills and a passion for solving hard problems. Industry experience in defense? Not required — we'll invest in you. If you meet the minimum qualifications, we want to talk. Apply today and take the next step in your engineering career.

The Systems Engineering and Test Center (SETC) organization is currently hiring a Senior Systems Engineer to join our Tucson, AZ location. SETC is an exciting and challenging environment where you will have the opportunity to design, develop and partner with multi-disciplines to shape innovative solutions for our customers. Join our organization and experience the Systems V engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, Chief Engineers, Chief Technologists, the customer, and so many more to ensure we design, integrate, and strengthen our systems to work the first time and every time for our warfighters!

As a Senior Systems Engineer you will be responsible for technical rigor of requirements documents, coordination across teams, sharing program process knowledge, mentoring engineers, and working with the technical and program leads execute program tasks.  Responsibilities include, but are not limited to, requirements management, providing SE oversight during integration and test activities. In this role, you will have the opportunity to work on an effectors project pertinent to the systems lifecycle.  This role is 100% on-site at our Tucson, AZ campus with the possibility of occasional travel.

What You Will Do 

• Update, maintain, and improve requirements and requirements documentation for development and production efforts

• Perform and execute integration, verification and testing and/or provide Systems Engineering support during the test.

• Support system performance analysis, and Integration and Test

• Model the system and the system development and production processes using Cameo

• Participate in Failure Investigations

• Conduct Trade Studies and present results to customers

• Perform test planning to develop and implement test plans, and procedures.

• Prepare integration and verification documentation in both simulated and real-world environments

• Create and present technical data for design reviews and in preparation for test events.

• Troubleshoot and analyze hardware, software, and system issues through detailed data analysis and debugging.

• Conduct statistical and numerical analysis of test data to ensure optimal system performance and to verify requirements.

• Support mission execution at various locations including local RTX facilities, test sites, vendor facilities, and customer locations

Qualifications You Must Have 

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM preferred) and a minimum of 5 years of relevant experience

• Experience in Systems Engineering and/or Systems Integration and test

• Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date.

Qualifications We Prefer

• Masters or PhD in Engineering, Math or Physics

• Experience presenting technical and analytical presentations

• Experience evaluating and mitigating technical risks

• Experience using Agile framework development methods / processes

• Experience with Agile, Model-Based Systems Engineering (MBSE), and/or Digital Engineering

• A self-starter who can take on task with limited guidance

• Customer focus and collaboration skills

• Experience with performance analysis

• Experience with DOORS and/or cPDM

• Ability to perform trade studies to optimize system performance

• Understanding of Systems Engineering Product Development Cycle

• Familiarity with system safety, reliability, and configuration management

• Experience working in an integration lab, test facility, or in the field supporting integration and/or verification.

• Experience evaluating systems using simulated environments

• Experience generating technical documentation such as trade studies, test plans, procedures or technical reports.

• Experience in integration with test equipment, telemetry data analysis tools, and missile systems host platforms

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligible – Relocation assistance is available

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  

• This position is an onsite role – Tucson, AZ: ,-az-location

• We Are RTX

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Systems Engineering and Test Center (SETC) organization is currently hiring a Sr. Systems Engineer – Software Responsible Systems Engineer (RSE) to join our Tucson, AZ team in the Advanced Technology Effectors System Engineering Department.  The SETC organization is an exciting and challenging environment where you will have the opportunity to design, develop and partner with multi-disciplines to shape innovative solutions for our customers. Join our organization and experience the Systems V engineering life cycle while interfacing with a variety of engineering disciplines, subject matter experts, chief engineers, chief technologists, the customer, and so many more to ensure we design, integrate, and strengthen our systems to work the first time and every time for our warfighters!

As a Sr. Systems Engineer – Software Responsible Systems Engineer (RSE) you will own the development and maintenance of all software and firmware level requirements and participate in compliance assessment and issue troubleshooting during formal qualification testing (FQT).  You will contribute to specifications of major systems and subsystems in the product technical data package, coordinating with Systems, Software, and Test teams to execute program tasks. 

This role is fully Onsite in Tucson, AZ.

What You Will Do

• Update and maintain all software and firmware system and subsystem level requirements specifications.

• SE technical contributor for verification and validation efforts, ensuring all requirements are being assessed during Formal Qualification Testing

• Work closely with the Systems, Software, and Test teams and IPTs on a variety of program technical tasks

• Participate in technical conversations with the customer

• Become a knowledgeable and ‘go-to’ Systems Engineer for the program

Qualifications You Must Have

• Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of five (5) years of prior relevant experience

• Experience with at least one of the following: systems software, systems firmware, systems hardware, systems requirements, systems integration, and/or systems test.

• Experience in test planning, verification of system requirements and/or formal qualification

• Active and transferrable U.S. government issued Secret security clearance is required prior to start date with the ability to obtain program access after start. US citizenship is required, as only U.S. citizens are eligible for a security clearance 

Qualifications We Prefer

• Masters or PhD in Engineering, Computer Science, Math or Physics

• Top Secret Clearance

• Experience in the Defense Industry and specifically with military systems; tactics, techniques, and procedures, as well as Department of Defense customer infrastructure experience.

• Experience using Agile framework development methods / processes

• Experience with software Formal Qualification Testing (FQT)

• Experience with performance analysis

• Experience with embedded software or firmware algorithms on missile products

• Experience with software or firmware requirements development on missile products

• Experience with DOORS, Cameo and/or cPDM

• Understanding of the Systems Engineering Product Development Cycle

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation Eligible – Relocation assistance available for this position

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. ,-az-location

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Director, Data Center Engineering

Location: Remote
Industry: Data Center / Critical Infrastructure

About the Role
We are seeking a highly skilled and technically driven Director, Data Center Engineering to lead engineering efforts across greenfield developments and the modification of existing assets. This role serves as the technical cornerstone for project execution-bridging sales strategy, engineering design, permitting, and consultant management.

You will oversee multidisciplinary engineering initiatives and manage architectural and engineering (A&E) consultants through formal design and permitting phases. With a focus on innovation and execution, you'll ensure every data center development is built on a strong, scalable, and compliant technical foundation.

Key Responsibilities

• Engineering Leadership

  • Own all engineering efforts related to data center infrastructure, including new builds and expansions.
  • Coordinate civil, structural, mechanical, and electrical (CSME) disciplines to deliver integrated, cost-effective solutions.
  • Translate sales and solutions engineering inputs into actionable design programs.
  • Validate technical feasibility, cost, and delivery schedules during planning stages.
  • Provide technical oversight from site planning through execution to maintain design integrity.

• A&E Consultant Management

  • Manage A&E consultants from conceptual design through permit sets and construction documentation.
  • Act as primary liaison for contractual negotiation and scope coordination under AIA agreements.
  • Drive permitting strategy with local authorities and consultants to ensure compliance and entitlement.
  • Align technical deliverables with broader project milestones in collaboration with legal, real estate, and construction teams.

About You

• 5-10 years of experience in data center, critical infrastructure, or industrial engineering roles.
• Strong technical background across civil, structural, mechanical, and electrical systems.
• Proven experience managing A&E consultants and delivering large-scale infrastructure projects from concept to permit-ready status.
• Familiarity with AIA contracts, permitting processes, and jurisdictional design reviews.
• Ability to integrate engineering strategies into commercial development initiatives.
• Exceptional leadership and cross-functional communication skills.
• Deep knowledge of data center system design, code compliance, and construction integration.
• Strategic mindset with a focus on execution, risk mitigation, and scalable infrastructure design.
  

*At Securian Financial the internal position title is Infrastructure Dir."

Mission

"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."

Positioning

The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.

This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.

• Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.

• Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.

• Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.

Scope of Accountability

Resilience Engineering & Cloud Reliability

• Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.

• Own resilience automation, chaos testing, and IaC-based recovery validation.

• Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.

Quality Engineering & Continuous Testing

• Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.

• Drive automation-first testing (functional, non-functional, performance, resilience).

• Embed observability-driven quality validation and contract testing across services.

Performance, Capacity & Efficiency Engineering

• Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).

• Partner with Platform & Infrastructure teams to tune performance across application and platform layers.

• Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.

Cross-Domain Architecture Collaboration

• Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.

• Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.

• Engage Data Architects for data resilience, replication, and pipeline reliability.

• Work with Business Architects to align technical reliability goals with critical business outcomes.

Leadership & Talent Development

• Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.

• Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.

• Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.

Core Technical Competencies

• AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.

• Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.

• Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.

• Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.

• Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.

• Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.

• Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.

• FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.

Leadership Competencies

• Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.

• Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.

• Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.

• Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.

• Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.

Qualifications & Experience

• 12+ years in cloud engineering, reliability, or platform leadership roles.

• 5+ years leading Sr. Managers/Managers in technical domains.

• Proven expertise across AWS, with working knowledge of Azure and GCP.

• Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.

• Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.

• Certifications:

  • Required: AWS Certified Solutions Architect - Professional

  • Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect

Success Metrics

• 99.9% availability maintained for Tier-1 workloads.

• 100% coverage of DR automation for Tier-1 services.

• 25% annual increase in automated quality/test coverage.

• 15% annual improvement in resource efficiency and cost performance.

• Documented resilience participation across all enterprise architecture blueprints.

• Positive "technical peer readiness" and succession rating from Head of REO.

Summary Value Proposition

This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.

It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*

Position Summary:

Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.

Responsibilities include but not limited to:

• Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.

• Perform analysis, design, development, and integration on medium to high level complexity assignments.

• Develop and support automation capabilities through webservices and APIs.

• Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.

• Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.

• Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.

• Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.

• Document technical processes and contribute to knowledge sharing across the EPS team.

Qualifications:

• Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.

• 3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.

• Familiarity with SAP ICM/APM and ALM modules.

• Strong problem-solving skills and ability to manage multiple priorities.

• Excellent communication skills and ability to work cross-functionally.

• Experience with Agile methodologies and DevOps practices is a plus.

Preferred Qualifications:

• SAP Certification in relevant Modules

• Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices

• Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.

• Ability to work independently and as part of a collaborative team.

• Commitment to continuous learning and process improvement.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

Job Title : Principal Mechanical Design Engineer

Job Family : Mechanical Design Engineering

Organization : Data Center Infrastructure Team

Location : Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

• Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

• Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

• Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

• Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

• Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

• Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

• Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

• Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

• Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

• Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

• Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

• Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

• Lead mechanical design reviews and contribute to cross-functional design validation efforts.

• Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

• Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

• Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

• Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

• Conduct root cause analysis and corrective actions for mechanical failures or field issues.

• Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

• Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

• May perform other duties and responsibilities as assigned

How will you get here? 

Education :

• Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience :

• 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

• Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

• Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

• Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

• Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills

• Creative, self-motivated, accountable, and team-oriented

• Able to work independently with minimal oversight

• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

• Skilled in writing reports, business correspondence, and procedural guides

• Effective at presenting information and responding to management, clients, and public queries

• Capable of influencing others and sharing best practices

• Comfortable working as part of a global team

• Capable of assessing projects, articulating risks, and developing project milestones

• Familiar with stage-gate processes in project lifecycle management (PLCM)

• Able to mentor less experienced engineers

• Ability to travel both domestically and internationally up to 30%

Preferred Qualifications:  

• Master’s Degree in Mechanical Engineering

• Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

• Active Professional Engineer (PE) license.

• Knowledge of regulatory and safety standards applicable to data center infrastructure.

• Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus

Job Title : Principal Mechanical Design Engineer

Job Family : Mechanical Design Engineering

Organization : Data Center Infrastructure Team

Location : Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

• Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

• Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

• Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

• Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

• Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

• Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

• Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

• Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

• Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

• Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

• Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

• Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

• Lead mechanical design reviews and contribute to cross-functional design validation efforts.

• Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

• Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

• Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

• Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

• Conduct root cause analysis and corrective actions for mechanical failures or field issues.

• Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

• Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

• May perform other duties and responsibilities as assigned

How will you get here? 

Education :

• Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience :

• 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

• Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

• Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

• Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

• Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills

• Creative, self-motivated, accountable, and team-oriented

• Able to work independently with minimal oversight

• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

• Skilled in writing reports, business correspondence, and procedural guides

• Effective at presenting information and responding to management, clients, and public queries

• Capable of influencing others and sharing best practices

• Comfortable working as part of a global team

• Capable of assessing projects, articulating risks, and developing project milestones

• Familiar with stage-gate processes in project lifecycle management (PLCM)

• Able to mentor less experienced engineers

• Ability to travel both domestically and internationally up to 30%

Preferred Qualifications:  

• Master’s Degree in Mechanical Engineering

• Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

• Active Professional Engineer (PE) license.

• Knowledge of regulatory and safety standards applicable to data center infrastructure.

• Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus

JOB SUMMARY