Jobs in Clinton Washington

Border Patrol Agent (BPA) Entry Level

NEW RECRUITMENT AND RETENTION INCENTIVES!

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW

The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.

Salary and Benefits

Annual Base Salary for newly appointed BPAs varies per grade, as follows:

GL-5/GL-7 $49,739 - $89,518 per year

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

• Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
• Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
• Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
• Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
• Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

• Make sound judgments and decisions in the use of firearms.
• Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
• Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply:

Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.

If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.At Boeing, we innovate and collaborate to make the world a better place.

We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.

Find your future with us.The Boeing Commercial Airplane (BCA) Engineering Data Analytics Tool Team (BEDAT) is looking for a Engineering Analytics Analyst to assist in transforming the BCA Engineering Digital footprint in Everett, WA .Primary Responsibilities: Collect, analyze and implement technical requirements for key performance indicators and metrics in a Cognos based dashboard serving community of 1500 users Design and support backend data source using MS SQL Server/Cognos, by extracting and staging data from 40 upstream databases, creating a single source authority for all BCA engineering related metrics and analytics Develop ad-hoc queries, reports and analytical analysis through SQL, R and Tableau in collaboration with business partners to analyze emerging opportunities Work closely with all levels of BCA Engineering leadership to understand the business and technical requirements Google Cloud Platform familiarization Leads cross-functional teams across multiple business processes Ensures accurate deliverables and maintains results, and communicates to all participants Collects, analyzes, documents, and integrates requirements from multiple process owners Applies and makes recommendations for the process, data, and applications/systems architecture May benchmark, or assist in benchmarking, best practices and industry standards; presents best practices at internal events Learns to balance competing strategic initiatives Conducts business requirements review, coordinates testing schedules, and assists in the preparation of test scripts Communicates with information technology organizations to represent customers and functional users on project requirements, activities, and status Serves as liaison to resolve business requirement issues between customer and information technology representatives Demonstrates basic knowledge and use of Project Management and/or Program Management Best Practices tools necessary to assist clients working through the life cycle of an improvement project, Includes facilitating plan development Seeks opportunities for company-wide synergy with practitioners of methods and tools from other skills or organizations Assists with integration of remaining aspects of enterprise architecture (e.g.

information, data, and applications architecture) Ensures solution has architectural compliance and strategic alignment with business objectives Leads, participates, or works together to reach agreement on the development of business architecture design, phased implementation, and useBasic Qualifications (Required Skills/ Experience): 1 or more years' experience with collecting, organizing, synthesizing, and analyzing data from multiple sources, summarizes findings; develops conclusions and recommendations from appropriate data sources.

1 or more years' of experience utilizing and developing Analytical tools & code.

ie.

SQL, tableau, Cognos, teradata, cloud platforms etc.

Bachelors' degree OR equivalent experience.Preferred Qualifications (Desired Skills/Experience): 1 more years' experience with supporting multiple managers / leaders with developing strategic monthly, quarterly and yearly strategic plans.

1 or more years' experience working directly with executives or senior leadersDrug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.

Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range:Level 3
- $93,090
- $105,280

Applications for this position will be accepted until Mar.

23, 2026Export Control Requirements:This is not an Export Control position.EducationBachelor's Degree or Equivalent RequiredRelocationRelocation assistance is not a negotiable benefit for this position.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.

Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

As a Home Health Registered Nurse, you will:

• Provide skilled nursing care to patients, working onsite in their homes, including administering medications, performing wound care, and conducting patient assessments.
• Develop and implement individualized care plans in collaboration with physicians and other healthcare professionals.
• Monitor patients' conditions and report changes.
• Educate patients and their families on disease management, medication, and treatment options.
• Maintain accurate records of patient care and coordinate with other healthcare professionals.
• Report patient care and condition progress to patient's physician and Clinical Manager.
• Oversee the work of Home Health Aides and monitor their appropriate completion of documentation.

Required Qualifications:

• Diploma, Associate or Bachelor's Degree in Nursing

• Med surg, ICU, ER, or acute experience

• Current and unrestricted Registered Nurse licensure

• Current CPR certification

• Experience collaborating with a team of healthcare professionals

• Valid driver's license, auto insurance and reliable transportation

Preferred Qualifications:

• One year nursing experience

• Home Health experience

Pay Range
•    $63.00 - $88.00 pay per visit/unit
•    $92,600 - $127,400 per year base pay
 

Additional Information

TB Statement:

This role is considered patient facing and is part of Humana's Tuberculosis (TB) screening program. If selected for this role, you will be required to be screened for TB.

Driving Statement:

This role is part of Humana's driver safety program and therefore requires an individual to have a valid state driver's license and are expected to maintain personal vehicle liability insurance. Individual must carry vehicle insurance in accordance with their residing state minimum required limits, or $25,000 bodily injury per person/$25,000 bodily injury per event /$10,000 for property damage or whichever is higher.

Scheduled Weekly Hours

Pay Range

Description of Benefits

​
Equal Opportunity Employer

It is the policy of Humana not to discriminate against any employee or applicant for employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or protected veteran status. It is also the policy of Humana to take affirmative action, in compliance with Section 503 of the Rehabilitation Act and VEVRAA, to employ and to advance in employment individuals with disability or protected veteran status, and to base all employment decisions only on valid job requirements. This policy shall apply to all employment actions, including but not limited to recruitment, hiring, upgrading, promotion, transfer, demotion, layoff, recall, termination, rates of pay or other forms of compensation and selection for training, including apprenticeship, at all levels of employment.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for an Inspector Electrical & Electronic Sub Assembly to join our Quality team in Everett and Renton, Washington.

As an Inspector for Electrical & Electronic Sub Assembly, you will be an integral part of our commitment to delivering top-notch quality in aerospace manufacturing. This exciting role places you at the intersection of technology and precision, where your keen eye for detail will ensure that every component meets the highest standards of safety and performance. You will engage with advanced inspection techniques and collaborate with a talented team to identify and resolve potential issues before they impact production. Please note that certification for visual acuity and color perception may be required for this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Communicate with shop personnel or check the Call Sheet for the next job or in-process inspection, obtaining applicable drawings and specifications.
• Ensure that the correct revisions of drawings and documents are being used, verifying that all paperwork and online systems are complete and accurate.
• Perform inspections and in-process inspections as required, including crimping, splicing, torque, bond, and ground checks.
• Conduct various tests and measurements, such as resistance tests, to ensure that wires meet specification requirements.
• Monitor manufacturing processes and document findings as required to ensure compliance with quality standards.
• Inspect electrical wire bundles and assemblies, ensuring all parts have been assembled according to drawings and specifications.
• Screen paperwork for options, substitutions, and effectiveness of parts and materials.
• Identify, investigate, and document discrepancies, reporting them to the shop as necessary.
• Reject wire bundles, assemblies, or installations as required, documenting discrepancies and processing Quality Assurance records.
• Indicate Quality Assurance acceptance on appropriate paperwork and online systems, processing documentation as required.
• Coordinate and complete travelers, investigating and clearing check orders as necessary.
• Initiate Inspection Record Change Requests (IRCR) and/or Shipside Action Trackers (SAT) as needed.
• Ensure that certifications for tools, test equipment, and personnel are current and compliant.
• Assist other employees by providing information and answering questions regarding functions, methods, and procedures.
• Perform first article inspections and FAA conformities, coordinating results as required.
• Enter data into various computing software systems, such as Common Manufacturing Execution System (CMES) and Enterprise Process Evaluation Systems (EPES).
• Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction initiatives.
• Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
• Perform audits and surveillance of manufacturing and quality assurance processes to ensure compliance with standards.
• Witness or perform electrical continuity, voltage, resistance, capacitance, and bond or ground testing as required.
• Calibrate and certify electrical process tools, such as loggers, strippers, and crimpers.
• Refer to rejection tags and trouble reports to identify problems and initiate corrective actions.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 2+ years of experience as a Quality Inspector
• 1+ years of experience using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators
• 1+ years of experience reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design)
• Experience working with Microsoft Office (Excel, Word, PowerPoint)
• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• Electrical experience

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Apr. 24, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Tank Sealer to join our Joint and Installation team in Everett and Renton, Washington.

As an Integral Fuel Tank Sealer, you will be essential in maintaining the highest standards of quality and safety during the sealing and assembly processes. Utilizing detailed installation plans and specifications, you will prepare tank surfaces, load sealing equipment, and apply sealants and topcoats according to established guidelines. Conducting thorough inspections and shakedowns of work areas prior to tank closure will ensure that any damaged seals or components are repaired and that all systems are functioning correctly. You will also assist with pressure testing operations and perform functional tests on fuel vent systems to identify and address any leaks. Your attention to detail will be critical in determining the appropriate sealing compounds and methods for each task, ensuring compliance. Please note that this role involves working in tight spaces, including entering the wing through a 9.5"X17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Obtain daily work assignments from the lead or supervisor and review relevant Installation Plans (IP) and Shop Order Instants (SOI) to determine the work area.
• Gather necessary sealants, solvents, cleaners, and wipers from the designated storage area.
• Install ventilation equipment as required to ensure proper airflow in the work cavity.
• Clean tank surfaces using appropriate solvents or detergents, ensuring they are wiped dry.
• Clean and adjust sealing equipment to ensure proper functionality.
• Load sealing guns and apply sealant and/or topcoat per BAC specifications, including fillet seals to system components and sealing heads and collars of fasteners.
• Perform a shake-down of work areas prior to tank closure to repair any damaged seals or components and prepare for inspection.
• Apply wing station identification numbers on tank doors using stencils and spray paint as required.
• Install fuel tank closure panels or access doors after all necessary steps are complete and accepted by quality assurance.
• Assist with pressure testing operations and perform functional tests on fuel vent systems and tank cavities to determine if leaks exist.
• Submit completed jobs or in-process checks to inspectors for acceptance or rejection.
• Determine proper sealing compounds, sequence of work, and method of application to accomplish assignments.
• Apply aerodynamic seals to skin gaps on leading and trailing edge panels as required.
• Position tools for locating vortex generators and apply faying surface seals as needed.
• Maintain personal and tool certifications, ensuring compliance with operational standards, and contact supervisors for assistance when needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience with paints, coatings, finishes, and/or sealants.
• Experience in handling chemicals and/or hazardous materials.
• Experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
• Experience working from heights & using fall protection equipment with weight limitations.
• Experience with safety process and/or procedures in a manufacturing or operations environment.
• Experience working with tools and following work instructions.
• Ability to access/enter a wing fuel tank opening (approximately 9.5 inch x 17.7 inch)

Preferred Qualifications:

• 1+ year of experience performing aerospace sealing.
• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
• Respirator trained
• Completed 1+ year of aerospace training in high school or community and technology college

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement

Applications for this position will be accepted until Aug. 28, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Silk Screener Decorative Panels B to join our Joint and Installation team in Everett Washington.

Join our innovative team as a Silk Screener for Decorative Panels. In this dynamic position, you will set up and execute multicolor silk screen printing operations, ensuring precise alignment and registration to create stunning instrument panels. Your expertise in mixing and matching paints will guarantee that each print meets our high standards for color consistency and clarity. Collaborating closely with various departments, you will coordinate the distribution of decals and maintain an organized inventory, all while adhering to safety regulations for hazardous materials. If you are passionate about combining creativity with technical skill in a fast-paced environment, we invite you to be a part of our mission to deliver exceptional decorative solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Set up and perform multicolor decorative silk screen printing operations according to established procedures.
• Align and adjust the silk screen to achieve proper contact and registration, applying paint using the squeegee method.
• Layout, locate, and apply lettering on various instrument panels using silk screening and related processes.
• Liaise with the Decal Area and other departments to coordinate changes, distribution of decals, and maintain perpetual inventory.
• Work from blueprints, specifications, and verbal instructions to complete assignments accurately.
• Clean silk screens and maintain tools and equipment to ensure quality printing.
• Mix and match paint to established color samples, ensuring consistency and accuracy.
• Obtain work orders and necessary materials, including inks and substrates, while adhering to safety data sheet guidelines.
• Perform hand setup for contact printing, including loading silk screens and applying ink to substrates.
• Operate the silk screen machine, managing the printing process for multiple colors and ensuring quality control.
• Check ink color using a color spectrometer and make adjustments as needed to match specifications.
• Perform rework and touch-ups on decorative interior parts using appropriate tools and techniques.
• Handle and dispose of hazardous materials in compliance with safety regulations.
• Maintain records of work performed and refile work packets in the ink room filing cabinet.
• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience silk screen printing.
• Experience mixing and color matching water based inks.
• Experience handling and disposing of hazardous materials per government regulations.
• Ability to recognize colors.
• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

Preferred Qualifications:

• Perform ink formulation (e.g. measure ink by weight, machine mix ink, apply ink to test specimen, dry in oven).
• Experience working with overhead crane.
• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $25.00 – $49.92 per hour

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Power Plant Operators A, to join our team in Everett, Washington.

As a Power Plant Operator A, you will be a vital part of our manufacturing team, responsible for safely and efficiently operating and maintaining power generation systems. This includes monitoring equipment, performing routine inspections, troubleshooting issues, and ensuring compliance with safety protocols.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Operate boilers, and may operate engines and boiler associated auxiliary equipment.
• Read gauges, meters, and charts to track boiler operations.
• Monitor boiler water, chemical, and fuel levels.
• Activate valves to change the amount of water, air, and fuel in boilers.
• Fire coal furnaces or feed boilers, using gas feeds or oil pumps.
• Inspect and maintain equipment to ensure that it is operating efficiently.
• Check safety devices and perform environmental checks routinely.
• Record data and keep logs of operation, maintenance, and safety activity.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• City of Seattle Steam Engineer's License Grade 2.
• 3+ Year Experience of boiler operation and maintenance experience.
• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
• Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift

Preferred Qualifications:

• Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.
• Ability to work in noisy environments while completing tasks.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Union of Operating Engineers (IUOE-7286) agreement.

Shift Work Statement:

• This position is for 4th shift

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $60.92 per hour – $60.92 per hour

Applications for this position will be accepted until Apr. 03, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Composite Fabricator to join our Fabrication team in Everett and Renton, Washington.

As a Composite Fabricator, you will play a vital role in ensuring the highest standards of quality and safety in the production of non-metallic components for our Airplanes. Your expertise will be essential in fabricating and assembling parts with precision, utilizing various methods and equipment while adhering to established safety protocols. You will be responsible for maintaining a safe working environment, ensuring that all processes meet rigorous quality specifications. Your attention to detail and commitment to excellence will directly impact the integrity of our products.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Fabricate, assemble, rework, repair, and finish a variety of non-metallic parts, tools, and assemblies to specifications using methods such as layup, foaming, bonding, molding, and drap forming.
• Operate mixers, impregnating equipment, heat treaters, curing equipment, formers, presses, and ovens according to established procedures, as well as various cutting equipment for flat pattern cuts of composite materials.
• Collaborate with Manufacturing and Engineering to provide input on design optimization for developmental and emergent projects.
• Utilize prints, charts, change notices, sketches, work orders, and engineering drawings to complete work assignments effectively.
• Impregnate materials and cut fabrics to size using appropriate tools such as knives and shears.
• Hand and machine finish parts to required tolerances, ensuring proper fit within completed assemblies.
• Sand and polish molds to achieve smooth surfaces and wrap mandrels with impregnated materials to meet specifications.
• Place vacuum bags over wrapped parts, test for leaks, and seal any identified leaks in pressure and vacuum bags.
• Prepare and apply protective materials, lacquers, and parting agents to molds, forms, and dies.
• Load, unload, and operate ovens, presses, and pressure bags during the curing process of parts and assemblies.
• Drill, trim, seal, part-mark, sand, and edge break parts to meet production requirements.
• Select and secure appropriate tools, fixtures, and equipment to accomplish assigned work.
• Use shop mathematics and precision measuring instruments to ensure accuracy in work assignments.
• Perform Total Preventive Maintenance (TPM) on equipment, including cleaning, oiling, greasing, and changing filters to maintain optimal operation.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.62 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 3 months or more reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
• 3 months or more with structure materials and processes including metals, composites, bonded and bolted joints.
• 3 months or more experience accessing a database for details work instructions.
• 3 months or more experience using precision measuring tools (i.e. micrometers, calipers, depth gauges, etc.).
• 3 months or more experience in composite fabrication.
• Must be able to lift, push, pull up to 35 pounds frequently within an 8 hour shift.
• Must be able to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

Preferred Qualifications:

• Comfortable working from high/exposed places, tight spaces and working from ladders.
• Ability to work in noisy environments while completing tasks.

Conflict of Interest:Successful candidates for this position must successfully complete the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

This position is for a variety of shifts.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $48.90/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 31, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

We're looking for Labor and Delivery RNs for an immediate travel nurse opening in Edmonds, WA. The right RN should have 3 years' recent acute care experience. Read below for more requirements.

• Stay with and monitor patient throughout labor.
• Monitor contractions and help patients with breathing techniques.
• Check cervix periodically to monitor progression/lack of dilation.
• Ensure beds are kept clean and dry; clean up bodily fluids expelled before and after birthing process.
• Aid physician with drapes, gloves, gowns, delivery instruments, etc.
• Immediate care of newborn.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company is looking forGuidance Navigation and Control Engineers (Associate, Experienced or Senior) to support the Flight Controls team in Everett and Renton Washington.

Position Overview:

We are seeking accomplished, self-motivated engineers to design, analyze, test, and certify flight control systems and components for large commercial aircraft. In addition to supporting production and fleet operations, you will be part of a team driving the development of new derivative airplanes and preparing for the next generation of more capable, efficient, and safer airliners.

This requisition includes multiple positions across various flight control disciplines, offering opportunities to contribute to a wide range of important and challenging projects. Our teams are currently hiring for a broad range of experience levels including Associate, Experienced and Senior Guidance Navigation and Control Engineers.

We foster a collaborative environment where every team member prioritizes safety and recognizes the profound significance of their contributions to the aviation industry. Our strong emphasis on teamwork and a robust safety culture is not just a value; it is essential to our mission. By cultivating a culture that values collaboration and safety, we ensure that our commitment to excellence resonates throughout our organization, ultimately enhancing the trust and confidence placed in us by those who fly. If you are passionate about making a difference and thrive in a dynamic environment where your contributions are recognized, we invite you to apply today and join our team!

Position Responsibilities:

• Resolve airplane level requirements into system level requirements and resolve system level requirements into component requirements with time and cost efficient validation methods.

• Develop and evaluate system and subsystem architecture alternatives to meet project objectives and requirements.

• Conduct trade studies to analyze and compare alternatives, rapidly converging on preferred configurations through system simulations and development test programs.

• Lead and participate in system, component, and detailed design efforts, ensuring thorough documentation and adherence to schedule and cost constraints to produce error-free, manufacturable specifications and drawings.

• Lead and support system- and component-level validation activities, including test plan development, consultation on iron bird and test rig setups, test monitoring, analysis, report authoring, supplier test report review and approval, failure analysis, and mitigation strategies.

• Drive certification efforts by creating required artifacts such as system safety analyses, failure modes and effects analyses (FMEA), and fault tree analyses (FTA); ensure traceability to regulatory requirements and resolve any regulatory conflicts.

• Support ongoing production by promptly addressing build issues at Boeing and supplier facilities, identifying and implementing design improvements to enhance build accuracy, production rate, and line safety, and resolving rejections, functional test failures, and flight squawks.

• Provide subject matter expertise to support global fleet operations, responding to airline and regulator inquiries, leading resolution of Service Related Problems (SRPs), and analyzing flight incidents to inform Safety Review Board (SRB) recommendations for the Continued Operational Safety Program (COSP).

• Collaborate effectively across functions and organizations within and outside Boeing, including manufacturing, avionics, crew operations, airplane safety, aerodynamics, supply chain management, BCA systems software, suppliers, airline customers, and regulatory agencies.

Work Authorization:

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Everett or Renton, WA.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science.

• 1+ years of technical experience in an aerospace or similar regulated industry environment.

Preferred Qualifications (Desired Skills/Experience):

• 3+ years of related work experience or an equivalent combination of education and experience.

• 5+ years of related work experience or an equivalent combination of education and experience.

• Knowledge/Experience with ARP 4754 and ARP 4761.

• Experience with flight controls system and component architecture.

• Experience in requirements development, design, analysis, and verification & validation of flight control systems.

• Experience using requirement management tools such as IBM Rational DOORS.

• Experience with manufacturing regulated and certified, safety critical components and software.

• Experience with Systems Safety Analysis, failure modes and effects analysis; fault tree analysis; common cause analysis, and single & multiple failure analysis.

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union:

This is a union-represented position.

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range:

• Associate (Level 2): $100,000 - $136,000

• Experienced (Level 3): $124,000 - $168,000

• Senior (Level 4): $153,000 - $207,000

Additional Information:

• All information provided will be checked and may be verified.

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Regulatory Administration & Airworthiness team is seeking Experienced (Level 3) or Senior (Level 4) Airworthiness & Regulatory Engineer to join their team on-site in Everett, Washington.

This team has opportunities for those looking toward next steps in their career development in the field of aviation regulations and safety. If you are a growth-minded person with excitement for certification systems, realizing efficiencies, and thrives in an environment of latitude, we encourage you to apply.

The team and leadership encourage innovation and forward-thinking solutions in an autonomous atmosphere. The team enjoys problem solving through investigating issues, developing action plans, data analysis and driving systems level solutions. This is a dynamic and highly visible environment.

Primary responsibilities:

• Provides technical guidance and training relative to complex safety and airworthiness matters
• Coordinate with engineering teams, project administrators, and regulators (may include international regulators/validation authorities) to successfully certify projects for commercial aircraft production teams
• Review certification plans, write letters to regulators, and understand compliance process
• Leading cross-functional teams resulting in resolution of technical issues.
• Coordinate technical messaging and partnering with the FAA on regulatory issues
• Own, manage, and have/develop technical aptitude to enable execution of process/procedure documents (BPM, BPIs, D6s, D950s, etc.)
• Ensure proper coordination across products, platforms and functional areas to promote culture of compliance to requirements and application of procedures and FAA guidance
• Develop strategic action plans for changes to certification processes and execute those plans through completion
• Contribute to root cause corrective action plans for development and execution of noncompliance’s, voluntary disclosures, informal corrective actions, formal corrective actions, etc. including reviewing/researching processes, design practices, analysis, conducting root cause analysis, and identifying/owning corrective actions and corrective action plans

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• Level 3: 5+ years of related work experience or an equivalent combination of education and experience.
• Level 4: 9+ years of related work experience or an equivalent combination of education and experience.
• 5+ years of experience working directly with the FAA and/or ODA on Type Certification projects
• 5+ years of experience in developing, contributing and/or maintaining processes, policies, and procedures.
• Experience with project management and self-managing projects.
• Desire to work in a collaborative environment and ability to interact well with various levels of leadership and front-line employees
• Ability to accomplish goals on a self-directed basis
• Experience leading cross-functional teams 

Preferred Qualifications (Desired Skills and Experience):

• Experience in presenting data to customers, suppliers, and program and site leaders.
• Knowledge of software development and Digital Services product portfolio is preferred.
• Previous experience with Safety Management Systems and/or understanding of FAA Part 5 regulations relating to SMS (or the equivalent global ICAO standards).
• Understanding of Safety Risk Management/Bowtie methodology.
• Experience working across the certification value stream
• Experience communicating verbally and in writing, to a variety of audiences including FAA representation, ODA Leadership, Engineering Unit Members (E-UM) & Project Administrators (PA), and Program & Functional Leaders
• Experience coaching/teaching E-UMs, Design Approval Engineers, Technical Specialists, Cert Plan Owners/Authors on certification processes and tool usage
• Experience identifying web application impact due to changes in certification requirements
• Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts
• Experience developing presentations and presenting to multiple levels of an organization
• Experience investigating and finding solutions to complex technical or regulatory issues
• Experience recognizing and balance conflicting priorities

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

• Experienced (Level 3): $114,750 - $155,250
• Senior (Level 4) $141,100 - $190,900

Applications for this position will be accepted until Mar. 21, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is seeking Senior Airborne Electronic Hardware (AEH) Engineer (Level 5)to join our team in Everett, Washington.

Position Overview:

The selected individuals will work within Boeing organizations and interface with suppliers to oversee development of Application Specific Integrated Circuits, Field Programmable Gate Arrays and Programmable Logic Device changes, ensure application of best industry and Boeing requirements and assure compliance with regulatory requirements.  Engineers applying for this position must understand RTCA/DO-254 and the relationship between complex electronics.  Highly desired are engineers with recent experience showing or finding compliance for airborne electronic hardware.

Position Responsibilities:

• Oversee and guide teams with airborne electronic hardware devices in development of airplane systems.

• Provide either showing of compliance or assisting in finding of compliance roles in accordance with FAA regulations associated with Airborne Electronic Hardware development.

• Provide direction to suppliers to improve their performance to contractual requirements (quality, delivery, cost, technical, safety, communication, etc.).

• Support audits and design reviews.

• Evaluate risks and opportunities; assist suppliers in implementing risk mitigation plans.

• Work with internal and external resources, utilizing tools, processes and methods to enhance supplier performance to meet customer and program requirements.

• Establish and maintain relationships with suppliers in support of airplane systems objectives.

Work Authorization:

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Everett, WA.

Basic Qualifications (Required Skills / Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement

• 7+ years of experience in developing complex electronic and electrical systems such as electronic device development, verification or compliance finding activities.

• 5+ years of experience in engineering, associated with certified airborne electronic hardware.

Preferred Qualification (Desired Skills / Experience):

• Ability to travel up to 15% of the time

• Bachelor's and 10+ years of experience or Master's and 7+ years of experience

• FAA Designated Engineering Representative, Authorized Representative or Engineering Unit Member in a company’s delegated compliance organization

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is a union-represented position.

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range:

$198,000 – $239,000

Additional Information:

• All information provided will be checked and may be verified.

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing's Safety, Security, & Airworthiness (SSA) organization is seeking a Senior Systems Engineer – Compliance/Certification to join their Regulatory Administration System Oversight Team in Everett, WA.

The individual will have the opportunity to contribute to critical monitoring initiative and collaborate with industry – leading professional and regulatory agencies

Primary responsibilities:

• Leads the identification, analysis, and assessment of regulatory and contractual compliance of aerospace systems, products and services.
• Collaborate with internal and external stakeholders to define airworthiness and regulatory compliance requirements
• Reviews complex regulatory and customer requirements and develop monitoring strategies. (i.e. Certification)
• Leads analysis of regulatory and certification technical data for completeness and alignment to applicable regulatory and contractual requirements.
• Develop the planning and implementation of monitoring strategies.
• Research, investigates and monitors compliance processes for achieving regulatory compliance and recommends and leads process improvements, risk and opportunities
• Engages with regulators on complex programs or initiatives to shape certification strategies, approaches, activities, and artifacts.
• Develops and reviews, complex compliance reports and documents in accordance with applicable requirements and regulations.
• Leads establishing and promoting global regulatory advocacy strategies, trainings, tools, and methods.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite in Everett, WA.

Basic Qualifications (Required Skills and Experience):

• 9+ years of related work experience or an equivalent combination of education and experience
• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• 8+ years of experience working across the certification value stream.
• Experience working in International Type Validation and/or Operational Certification
• 4+ years of experience with certification processes to comply with 14 CFR 21.93, 21.95 and 21.97
• Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts
• Experience developing presentations and presenting to multiple levels of an organization
• Experience investigating and finding solutions to complex technical or regulatory issues
• Strong technical writing abilities
• Experience extracting and compiling data from multiple sources
• Experience with analytics tools including Tableau, SQL, R, and Python

Preferred Qualifications (Desired Skills and Experience):

• 8+ years of experience identifying key stakeholder project specific requirements and scope, then building and managing project plans
• 8+ years of experience in business intelligence/data analytics tools (Microsoft Power BI, Dashboards, SQL, Tableau, etc.)
• Experience with systems engineering and integration of complex systems
• Experience with Risk Management
• Experience with audit activities
• Experience with Functional Decomposition
• Firsthand experience with airplane requirements

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $129,700 - $174,80

Applications for this position will be accepted until Mar. 25, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

At the center of the efforts for BCA’s focus on stabilizing and improving the production system, our Production Engineering organization is growing! We are looking to fill multiple Production Engineering Manager positions with qualified and motivated candidates passionate about leading Boeing into the future.

Candidates considered for the role will lead integrated groups of engineers and technical staff operating within the BCA Production System. The leader will have the opportunity to work across multiple programs and areas. Adaptability and the ability to learn quickly are essential. We are looking for leaders who bring unique perspectives, curiosity and creativity when approaching challenges, and an insatiable desire for improvement.

Technical leadership and aptitude are essential for success in these roles along with people leadership skills to develop and inspire a team to reach a shared goal and vision. Strong candidates will have demonstrated success in developing and maintaining relationships with customers, stakeholders, and peers, as well as strong problem-solving skills, willingness to take initiative, and the ability to work across multiple functions to lead the development and implementation of production system solutions.
 

Primary Responsibilities:

• Lead teams responsible for the development, sustainment, and continuous improvement of the production system. Elements include but are not limited to: process engineering, manufacturing support, build plan development and oversight, technical management of suppliers, and introducing new technology.

• Lead special projects supporting key company priorities. Projects may include but are not limited to: stabilize and improve efficiency of the production system, enable rate increases on our production lines, and manage incorporation of product and process changes into the production system.

• Oversee technical management of suppliers in the design, sourcing, and implementation of new or improve build processes throughout the production system value stream.

• Develop and maintain partnerships with customers, stakeholders, peers, business partners and direct reports. Leverage network to seek broad input on key projects and initiatives.

• Manage, develop, and motivate employees to achieve their best both individually and as a team

Basic Qualifications (Required Skills/ Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement

• 3+ years of experience in a professional engineering role
   

Preferred Qualifications (Desired Skills/Experience):

• 3+ years of experience working in a production environment

• 3 + years of experience with production systems design

• Experience leading or managing teams

• Experience working with cross-functional teams

• Experience with build plan development and deployment

• Experience with electrical or systems commodity

• ABET accredited Engineering degree

Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. 

Pay and Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. 

Summary pay range: $151,300 – $204,700

Applications for this position will be accepted until Mar. 25, 2026

Export Control Requirements:

This is not an Export Control position.

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Commercial Airplanes (BCA), Configuration Management/Data Quality & Distribution organization has an exciting opportunity for a Mid-Level (Level 3) or Senior (Level 4) Mid-Level or Senior Safety & Airworthiness Support to join our team in Everett, WA.

Primary responsibilities:

• Analyzes data gathered from identified sources, identifies discrepancies and works with responsible organizations to resolve.
• Manages the change process. Integrates and coordinates design and configuration data required for certifications and/or flight clearance notices.
• Collects, organizes, synthesizes and analyzes data to support and guide business decisions. Summarizes findings.
• Performs configuration verification audits.
• Supports generation of product configuration data required for certifications and flight clearance notices.
• Supports the development of certification plans and deliverables for approval by regulatory representatives
• Collaborates with cert specialist across multiple functions to support cert activity.
•  Supports the daily development of data packages, metrics, and deliverables in support of certify and delivering commercial aircraft.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location.

Basic Qualifications (Required Skills and Experience):

• Associate’s degree or higher
• Level 3: 3+ years of related work experience or an equivalent combination of education and experience
• Level 4: 6+ years of related work experience or an equivalent combination of education and experience
• Strong cross‑functional integration experience (working with engineering, manufacturing, supply chain, quality, or customer support).
• Excellent communication and stakeholder engagement skills, including experience engaging with senior/executive leadership and conveying information clearly.
• Experience leading cross-disciplinary teams in large organizations.
• Proven ability to support projects and drive plans to closure.

Preferred Qualifications (Desired Skills and Experience):

• Previous experience with regulatory compliance in aerospace or related industries.
• Familiarity with 14 CFR Part 25 requirements and experience interacting with regulators.
• Proven ability to lead projects and drive plans to closure.
• Desired tool familiarity: DCCS, ETAC, etc.
• Knowledge of baseline major/minor model and options documentation (e.g., configuration specification, customer detailed specifications, standard selections document).
• Knowledge of drawing/data systems (e.g., ""used on"" drawings, part relationships, product data management) and configuration management principles and processes (e.g., part number control, revision level, naming conventions, product identification numbering systems).
• Knowledge of responsibilities and tasks performed by various Engineering departments/disciplines (e.g., design, test, software, technology, avionics). Knowledge of the interaction between departments/disciplines and how their products/processes affect one another and impact non-engineering processes (e.g., Operations, Logistics, Business).

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

• Mid-Level (Level 3): $92,650 - $125,350
• Senior (Level 4): $114,750 - $155,250

Applications for this position will be accepted until Mar. 21, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Enterprise Certification Processes team is seeking a Mid-Level (Level 3) or Senior (Level 4) Certification Systems Engineer - Regulatory Administration & Airworthiness to join our team in Everett, WA.  If you are a growth-minded person with excitement for certification systems, realizing efficiencies, and thrives in an environment of latitude, we invite your application.

The Regulatory Administration & Airworthiness (RA&A) Enterprise Certification Processes team is centrally responsible for integration of certification processes across our Global Enterprise (Commercial, Defense and Global Services).  Team members grow to become experts in the certification business and solve technical issues across the certification value stream.  We are owners of processes and documents, manage change and drive efficiency/ease of compliance all from a variety of sources.

Understanding of the Boeing ODA Procedures Manual (BPM) and affected processes and procedures is strongly desired. Experience working with the FAA is also strongly desired. This position will interface with ODA Unit members such as Project Administrators and Engineering Unit Members.

The team and leadership encourage innovation and forward-thinking solutions in an autonomous atmosphere.  The team enjoys problem solving through, developing action, data analysis and driving systems level solutions.  It is a dynamic and highly visible place of work.

Position Overview:

• Leads/Contributes to cross-functional teams resulting in resolution of technical and certification issues.
• Coordinates technical messaging and partnering with the FAA on regulatory issues
• Develops strategic action plans for changes to certification processes and execute those plans through completion.
• Contributes to root cause corrective action plans for development and execution of noncompliance’s, voluntary disclosures, informal corrective actions, formal corrective actions, etc. including reviewing/researching processes, design practices, analysis, conducting root cause analysis, and identifying/owning corrective actions and corrective action plans.
• Working knowledge of Boeing’s Organization Delegation Authorization (ODA) procedures manual.
• Ensures proper coordination across products, platforms and functional areas to promote culture of compliance to requirements and application of procedures and FAA guidance.
• Participates in establishing and promoting global regulatory advocacy strategies, trainings, tools, and methods.

Basic Qualifications (Required Skills and Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
• Level 3: 5+ years of related work experience or an equivalent combination of education and experience
• Level 4: 9+ years of related work experience or an equivalent combination of education and experience
• Experience working directly with the FAA and/or ODA on Type Certification projects
• 3+ years of experience in developing and/or contributing to processes, policies, and procedures in a regulated industry
• 3+ years of experience working in the Aerospace industry
• Technical aptitude to enable execution of process/procedure documents (BPM, BPIs, D6s, D950s, etc.)

Preferred Qualifications (Desired Skills and Experience):

• Master's degree in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
• Experience working as a Project Administrator (PA) or Design Approval Engineer (DAE) highly valued and encouraged to apply.
• Experience working across the certification value stream.
• Experience working with Type Authorization Inspection (TIA)
• Experience with certification processes Boeing uses to comply with 14 CFR 21.93, 21.95 and 21.97
• Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts
• Experience developing presentations and presenting to multiple levels of an organization.
• Experience investigating and finding solutions to complex technical or regulatory issues.
• Experience recognizing and balance conflicting priorities.
• Strong technical writing abilities.
• Strong presentation skills.
• Experience writing, reviewing, or approving Certification plans.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

• Experienced (Level 3): $114,750 - $155,250
• Senior (Level 4) $141,100 - $190,900

Applications for this position will be accepted until Mar. 25, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Chief Aerospace Safety Office (CASO) team are seeking a Mid-Level (Level 3) or Senior (Level 4) Safety & Airworthiness Specialist to join its Regulatory Administration & Airworthiness Compliance team within Boeing ODA (Organization Designation Authorization) in Everett, Washington.

This is a unique career opportunity that will support the management and execution of the ODA Unit Member Interference processes, ensuring strict adherence to the requirements of the Aircraft Certification, Safety, and Accountability Act of 2020. This includes early dispute resolution, interference allegation investigations, coordination with Corporate Investigations and Legal, and ensuring compliance with FAA requirements related to interference prevention and resolution. The candidate will apply detailed knowledge of Boeing’s ODA procedures, FAA regulations, and the Act’s mandates to support root cause analyses and corrective action plans related to interference and certification safety issues

In Addition, this role will work closely with a dynamic team of project managers, internal Boeing organizations, and the Federal Aviation Administration (FAA). The successful candidate will lead a variety of compliance-related projects, primarily conducting and managing Root Cause Analyses (RCA) and applying problem-solving models on issues identified by the FAA or internally.

This Individual Contributor role requires the use of various project management tools and software to facilitate and conduct investigations related to Airworthiness Non-Compliances and ODA unit member interference. The candidate will conduct research to determine noncompliance with the ODA Procedures Manual, Code of Federal Regulations (CFRs), and the Aircraft Certification, Safety, and Accountability Act of 2020. They will provide oversight and guidance to resolve medium to complex certification/compliance technical issues, clarify procedures related to FAA-issued Letters of Investigation, compliance actions, voluntary disclosures, and Part 25 Airworthiness Non-Compliances.

The role involves close coordination with internal stakeholders and the FAA, organizing and conducting meetings to resolve outstanding issues, and cross-functional collaboration between Engineering teams, Regulatory Administration, Safety, Quality, and other organizations. The candidate will ensure regulatory project milestones are met and will create and review documents for internal and external stakeholders, including the FAA. Close monitoring and tracking of assigned action items is expected to support company performance goals.

Primary responsibilities:

• Manage and execute the ODA Unit Member Interference processes in accordance with Boeing Procedures Manual, FAA regulations, and the Act’s requirements, including early dispute resolution and interference allegation investigations.
• Coordinate with Corporate Investigations, Legal, ODA administrators, and other stakeholders to ensure timely and compliant resolution of interference and certification safety issues.
• Prepare and submit required reports and correspondence to the FAA within regulatory timelines, including initial and final interference reports, ensuring alignment with the Act’s transparency and accountability provisions.
• Facilitate root cause analyses (RCA) and development of corrective action plans (CAP) for substantiated interference and compliance issues, supporting a culture of safety and accountability.
• Utilize project management tools to track and report on interference, compliance, and certification safety metrics.
• Maintain confidentiality and handle sensitive information with discretion, supporting whistleblower protections and ethical reporting.
• Communicate effectively across departments with strong verbal and written skills to share ideas, present findings, and provide recommendations.
• Develop and monitor the implementation of corrective actions to address substantiated interference and prevent recurrence
• Gather and analyze relevant data to perform root cause analysis and investigations.
• Apply critical thinking to evaluate data and processes to support compliance, safety, and interference resolution.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Everett.

Basic Qualifications (Required Skills and Experience):

• Level 3: 6+ years of related work experience or an equivalent combination of education and experience
• Level 4: 10+ years of related work experience or an equivalent combination of education and experience
• 3+ years of experience in project management
• 3+ years of experience in systems engineering
• Experience or familiarity with regulatory compliance processes, investigations, or dispute resolution

Preferred Qualifications (Desired Skills and Experience):

• Previous experience with Product Safety in aerospace or related industries
• 1+ years of experience with FAA regulations, ODA procedures, and the Aircraft Certification, Safety, and Accountability Act of 2020
• Deep understanding of 14 CFR § 183.57 (ODA Responsibilities)
• 1+ years of experience with Root Cause Analysis
• Experience with ODA Unit Member Interference reporting and resolution processes
• Experience working with Corporate Investigations, Legal, or compliance teams
• Knowledge of root cause analysis methodologies applied to compliance or personnel issues
• Strong attention to detail and ability to handle sensitive and confidential information
• Excellent communication and interpersonal skills.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range:

• Mid-Level (Level 3): $102,000 - $138,000
• Senior (Level 4): $127,500 - $172,500

#CASO

Applications for this position will be accepted until Mar. 21, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.