Jobs in Charlton

Border Patrol Agent (BPA) Entry Level

NEW RECRUITMENT AND RETENTION INCENTIVES!

IMPORTANT NOTICE: Duty assignments available at the time of offer may include the Southwest Border, including prioritized locations.

U.S. Border Patrol determines duty assignments at the time of offer based on operational needs, which may or may not align with candidates' first-choice preferences. Relocation may be required.

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW

The U.S. Border Patrol (USBP) offers those interested in a career in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission of protecting America.

If you seek an exciting and rewarding job that provides excellent pay, exceptional federal benefits, and job stability, now is the time to make your move. U.S. Border Patrol (USBP), within the U.S. Customs and Border Protection (CBP), is hiring immediately for these full-time, entry-level, career Law Enforcement Officer (LEO) opportunities.

Salary and Benefits

Annual Base Salary for newly appointed BPAs varies per grade, as follows:

GL-5/GL-7 $49,739 - $89,518 per year

Duty location impacts pay rates; locality pay for federal law enforcement is higher in some locations than others. A fully trained BPA may be eligible for up to an additional 25% of base pay per the BPA Pay Reform Act of 2014. This is a career ladder position with a grade level progression of GL-5, GL-7, GL-9, GS-11, and GS-12. You will be eligible for a promotion to the next higher grade level (without reapplying) once you successfully complete 52 weeks in each grade level.

Border Patrol Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional ROTH 401(k) offering.

*Recruitment Incentive* Newly appointed Border Patrol Agents (as defined in 5 CFR 575.102 ) will be offered up to a $20,000 incentive. The first $10,000 will be paid upon successful completion of the Border Patrol Academy, with the remaining $10,000 awarded for accepting a prioritized location. Prioritized locations include Sierra Blanca, TX; Presidio, TX; Sanderson, TX; Comstock, TX; Lordsburg, NM; Freer, TX; Hebbronville, TX; Ajo, AZ.

*Retention Incentive* Newly appointed Border Patrol Agents may also qualify for up to $40,000 in additional incentives distributed over their first four years.

Duties and Responsibilities

As a BPA, you will be part of our 60,000+ workforce that strives to protect the American people by safeguarding our borders, deterring illicit activity, and enhancing the nation's economic prosperity. Being a BPA makes you a valuable member of the Federal Law Enforcement Officer (LEO) profession.

Typical assignments include:

• Detecting and questioning people suspected of violating immigration and custom laws and inspecting documents and possessions to determine citizenship or violations
• Preventing and apprehending undocumented noncitizens and smugglers of noncitizens at or near the borders by maintaining surveillance from covert positions to include using infrared scopes during night operations
• Interpreting and following tracks, marks, and other physical evidence of illegal entry of persons or contraband
• Performing farm checks, building checks, traffic checks, city patrols, and transportation checks
• Patrolling the international boundary and coastal waterways using a variety of government assets such as vehicles, horses, vessels, watercraft, off-road vehicles, ATVs, snowmobiles, and motorcycles for the accomplishment of the USBP Mission.

Qualifications

You qualify for the GL-5 grade level if you possess one of the following:

Experience: One (1) year of general work experience that demonstrates the ability to take charge, make sound decisions, and maintain composure in stressful situations; to learn regulations, methods, and techniques through classroom training and/or on-the-job instruction; and the ability to gather concise information through questioning, observation, and examination of documents and records; OR

Education Substitution: A bachelor's degree or successful completion of a full four-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR

Combination of Experience and Education: A combination of general work experience AND successfully completed college education. This will be calculated using your resume and official or unofficial transcripts submitted with your application.

You qualify for the GL-7 grade level if you possess one of the following:

Experience: One year of specialized work experience that shows you have the skills necessary to:

• Make sound judgments and decisions in the use of firearms.
• Deal effectively with people in a courteous and tactful manner in connection with law enforcement matters.
• Analyze information rapidly and make prompt decisions where you will be expected to make arrests after the completion of required training and apply these skills in a law enforcement capacity such as criminal code enforcement, determining violations of laws, correctional or rehabilitation work involving criminal offenders, security, military, etc.

The above experience will be applied in connection with the following: Make arrests and exercise sound judgment in the use of firearms; deal effectively with people in a courteous manner in connection with law enforcement matters; analyze information rapidly and make prompt decisions; or develop and maintain contact with a network of informants.

Education Substitution for the GL-7 grade level: A bachelor's degree with superior academic achievement, which is based on (1) class standing, (2) grade-point average (i.e., GPA of 3.0 or higher out of a possible 4.0), or (3) honor society membership. Or will receive a bachelor's degree with Superior Academic Achievement. Or one full year of graduate-level education in a field of study related to law enforcement (e.g., criminal justice, homeland security, justice studies, law enforcement, courts and judicial systems, forensic technology, forensic psychology, or corrections and rehabilitation) from an accredited college or university; OR

A Combination of Experience and Education: This will be calculated using your resume and official or unofficial transcripts submitted with your application.

Note: If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GL-9 and or GS-11 grade level. Please refer to the BPA GL-9 - 11 announcement.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference: You may also be eligible for an excepted service Veterans Recruitment Appointment (VRA). The age restriction does not apply if you are Veterans' Preference eligible.

Formal Training: After you are hired, you will be detailed to the U.S. Border Patrol Academy in Artesia, New Mexico, for approximately six (6) months of intensive instruction in immigration and nationality laws, law enforcement and USBP-specific operations, driver training, physical techniques, firearms, and other courses. Border Patrol work requires the ability to speak and read Spanish, as well as English. Border Patrol Agents will be provided training to become proficient with the Spanish language at the Academy.

How to Apply:

Click the Apply button on this site. You will be linked to the CBP Talent Network registration page. For Position of Interest, select Border Patrol Agent, then complete the pre-screening questions.

You'll then receive a link(s) to the BPA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application. Be certain to review ALL details of the job opportunity announcement and follow all instructions in the application process, including items (resume, transcripts, etc.) to submit. You will be evaluated based on your resume, supporting documents, and the BPA Entrance Exam.

If you have questions about the application process, contact a recruiter through the U.S. Border Patrol page: /s/usbp.

As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with CBP.

The Team Member is responsible for interacting with customers and team members, supporting selling initiatives and performing assigned tasks, while delivering a Legendary Customer Experience.

Do you love the life out here and want to share it with others? At Tractor Supply we strive to make the life out here a little bit better each day for both our neighbors and our teams.

As a Team Member, it is essential that you be available, flexible, adaptable and service-oriented, as you must be able to fulfill all of the following requirements:

• Maintain regular and predictable attendance.
• Work scheduled shifts and have the ability to work varied hours, days, nights, weekends and overtime as dictated by business needs.
• Deliver on our promise of Legendary Customer Service through GURA:
  • Greet the Customer.
  • Uncover Customer's Needs & Wants.
  • Recommend Product Solutions.
  • Ask to Add Value & Appreciate the Customer.
• Team Members are required to perform a combination of the following duties during 95 percent of their day. Although the mix may vary from one day to another, our business and staffing model makes it essential that every Team Member be able to perform all of the following duties accurately, efficiently and safely on a regular basis and without advance notice:
  • Operate cash register/computer following cash handling procedures as established by Tractor Supply Company.
  • Recovery of merchandise.
  • Participate in mandatory freight process.
  • Complete Plan-o-gram procedures (merchandising, sets, and resets).
  • Assemble merchandise.
  • Perform janitorial duties.
  • Execute price changes/markdowns.
  • Operate Forklift (unless under the age of 18).
  • Operate Cardboard Baler (unless under the age of 18).
  • Assist customers with loading purchases.
  • Ensure the customer has a Legendary shopping experience that differentiates from the competition.
  • Ensure the safety and well-being of birds. Sanitize and maintain poultry holding tanks and care for birds as required.
  • Complete all documentation associated with any of the above job duties.
• Team Members also may be required to perform other duties as assigned.

Experience: No experience required. Retail experience and/or farming, ranching, pet/equine, or welding knowledge is strongly preferred.

Education: A high school diploma or equivalent is preferred, but not required. Regardless of education level, Team Members must be able to read, write and count accurately.

• Farming, ranching, pet/equine, or welding knowledge is strongly preferred.
• Ability to read, write, and count accurately.
• Strong communication and problem-solving skills.
• Basic computer skills.
• Strong interpersonal skills and ability to resolve issues ethically and with minimal conflict.

• Working environment is favorable, generally working inside with moderate noise.
• Indoor floors and outdoor lots generally are hard surfaces (concrete, asphalt, etc.) lighting and temperature are adequate.
• Work shifts vary from one store to another, but generally are no less than 4 hours and may exceed 8 hours.
• Promote a safe and productive work environment for Team Members and customers and adhere to Company safety training and guidelines.

• Ability to move and transfer merchandise, weighing up to 50 pounds, throughout the store.
• Ability to push and pull merchandise up to 2,000 pounds with the assistance of proper material handling equipment (e.g. pallet jack).
• Ability to occasionally lift or reach merchandise overhead.
• Ability to frequently stand, kneel, twist, crouch, squat, bend, stoop, and climb ladders.
• Ability to move throughout the store for an entire shift.
• Ability to safely access all areas of the store including selling floor, side lot, stock area, and register area.
• Ability to operate and use all equipment necessary to run a store (e.g. dolly, handtruck, forklift, baler, computer, cash register) (forklift and baler requirements do not apply if under the age of 18).
• Ability to constantly operate store equipment such as computer, cash register, and other store equipment.
• Ability to read, write, and count accurately to complete all documentation.
• Ability to utilize strong written and verbal communication skills to communicate effectively with team members.
• Ability to process information / merchandise through the point-of-sale system.
• Ability to handle and be in contact with birds/poultry.
• Ability to successfully complete all required training.
• Ability to successfully complete training and certification to dispense propane, and to dispense propane (propane certification and dispensing requirement does not apply if under the age of 18).

This job description represents an overview of the responsibilities for the above referenced position. It is not intended to represent a comprehensive list of responsibilities. A team member should perform all duties as assigned by his/ her supervisor.

At Tractor Supply and Petsense by Tractor Supply, our Team Members are the heart of our success. Their dedication, passion, and hard work drive everything we do, and we are committed to supporting them with a comprehensive and accessible total reward package. We understand the evolving needs of our Team Members and their families, and we strive to offer meaningful, competitive, and sustainable benefits that support their well-being today and in the future.

Our benefits extend beyond medical, dental, and vision coverage, including company-paid life and disability insurance, paid parental leave, tuition reimbursement, and family planning resources such as adoption and surrogacy assistance, for all full-time Team Members and all part-time Team Members. Part time new hires gain eligibility for TSC Benefits by averaging at least 15 hours per week during their 90-day lookback period. The lookback period starts the first of the month following the date of hire. If the 15-hour requirement was met, the benefits eligibility date will be the first day of the month following 4 months of continuous service.

Please visit this link for more specific information about the benefits and leave policies applicable to the position you're applying for.

• 
  
• Assemble or fabricate mechanical parts, pieces, or products using a variety or tools and equipment
  
• Collect materials and equipment needed to begin assembly process
  
• Perform inspections and measure parts using basic measuring tools
  
• Achieve applied and earned production rates to standard and communicate issues that could cause unfavorable rates
  
• Perform basic preventative maintenance, as trained, for required tools and equipment
  
• Document actions by completing required production documentation, both written and electronic
  
• Working as part of team, accomplish department goals
  
• Adhere to company safety requirements and wear PPE as directed / required
  
• Read, interpret and follow detailed instruction to complete the highest quality product
  
• Other duties may be assigned as business needs dictate
  

• 
  
• High School Diploma or GED required
  
• 1-2 years of mechanical assembly experience is preferred
  
• Familiarity with ISO9001, AS9100 standards for quality control preferred
  
• Strong technical, mechanical, and or electrical aptitude
  
• Fine motor skills, and the ability to work with small parts and components
  
• Effective and professional communication skills (verbal and written) and highly organized
  
• US Citizenship or Permanent Residency required
  

• 
  
• Able to work flexible hours when required
  
• Excellent record of attendance and reliability
  

• 
  
• Medical, dental, vision, life, and disability insurance with coverage on day one
  
• 11 paid holidays
  
• Paid vacation (PTO)
  
• Paid sick/personal time
  
• Matching 401K with vesting on day one
  
• Tuition reimbursement
  
• Dependent scholarship programs
  

****Job Description
**: As a Material Handler at DHL, you will be responsible for moving and handling materials and products within the warehouse.

This includes loading and unloading materials from delivery vehicles, operating forklifts and other machinery, and ensuring that all materials are stored correctly and efficiently.

You will be responsible for tracking inventory, keeping accurate records, and ensuring that materials are readily available for shipping and production processes.

The role requires a strong understanding of warehouse operations, attention to detail, and the ability to work independently or as part of a team.

Manufacturing Engineer

The ideal candidate will support high-voltage, high-vacuum electrical testing and advanced detector manufacturing. This opportunity is ideal for engineers with experience in semiconductor manufacturing, vacuum systems, electron-optical components, or precision instrumentationwho thrive in hardware-focused environments. LOCAL CANDIDATES ONLY PLEASE.

Key Responsibilities

• Perform electrical testing and troubleshooting of precision detector assemblies in an ISO 7 cleanroom
• Operate and maintain high-vacuum systems (10⁻⁷ to 10⁻⁶ Torr) and high-voltage power supplies
• Conduct detailed mechanical and electrical teardowns for root cause and failure analysis
• Diagnose issues including low gain, shorts, vacuum leaks, contamination, and alignment defects
• Support daily production, improve manufacturing yields, and reduce scrap
• Track and analyze yields using SPC methods and tools such as MINITAB
• Maintain test fixtures, oscilloscopes, electrometers, and vacuum controllers
• Contribute to Lean Manufacturing, 5S, and ISO 9001 quality initiatives

Qualifications

• U.S. Citizenship required (ITAR compliance)
• 5+ years of experience
• Bachelor’s degree in Electrical, Mechanical, Materials Engineering, Physics, or related field
• Experience with semiconductor vacuum systems with high voltage and low current
• Must have test background, failure analysis, and be able to troubleshoot
• Strong troubleshooting, analytical, and documentation skills
• Proficiency with MS Office, MRP systems, and technical reporting

Sales Design Engineer – CEA (Controlled Environment Agriculture)

Role Overview

The Sales Design Engineer for CEA plays a critical role at the intersection of sales, engineering, and customer solutions. This position supports the sales process by translating customer needs into technically sound, well-designed CEA systems, while helping ensure feasibility, accuracy, and alignment between sales commitments and execution.

This role partners closely with Sales, Engineering, and Operations to develop conceptual designs, validate system requirements, and support proposals for CEA projects.

Key Responsibilities

• Support the sales team by developing conceptual and preliminary CEA system designs based on customer requirements
• Translate customer goals into technical layouts, system concepts, and solution narratives
• Assist with technical scoping, system feasibility, and early-stage design considerations during the sales process
• Collaborate with internal teams to ensure designs align with engineering standards, cost assumptions, and operational capabilities
• Provide technical input for proposals, presentations, and sales documentation
• Participate in customer discussions as a technical resource when appropriate
• Identify risks, constraints, or design considerations early in the sales cycle to support accurate selling

Training & Development

This role will receive hands-on training and mentorship from senior leadership and subject-matter experts within the organization. The individual will learn directly from seasoned leaders with deep technical and operational expertise, providing a unique opportunity to be trained by the best of the best during onboarding, our President!

Qualifications (Initial)

• Bachelor’s degree in engineering required
• Background in engineering, design, or a technical discipline (or equivalent practical experience)
• Experience with CEA systems, greenhouse design, or related agricultural or industrial systems required
• AutoCAD or Visio experience
• Knowledge of Project Management processes
• Ability to communicate technical concepts clearly to non-technical audiences
• Strong collaboration skills and comfort working cross-functionally
• Detail-oriented, with the ability to think both conceptually and systemically

Success in This Role Looks Like

• Sales opportunities are supported with clear, credible technical designs
• Fewer disconnects between what is sold and what is built
• Strong collaboration and trust between Sales, Engineering, and Operations
• Customers feel confident in the technical solution being proposed

Manufacturing Engineer – Advanced Detector Systems

Location: Sturbridge, MA (100% Onsite)

Salary: Up to $140K depending on experience

Environment: ISO 7 Cleanroom, High‑Voltage/High‑Vacuum Equipment

Candidates with backgrounds in semiconductor fabrication, vacuum systems, photonics, electron‑optical components, or high‑voltage instrumentation are strongly encouraged to apply.

Position Summary

We are seeking a hands‑on Manufacturing Engineer to support electrical testing, troubleshooting, and production of advanced detector technologies, including microchannel‑based devices and electron‑multiplying components. This role is highly technical and hardware‑focused, requiring daily work on the production floor within an ISO 7 cleanroom.

You will ensure detector assemblies meet stringent electrical, vacuum, and performance specifications while supporting test station operations, conducting full detector teardowns, and maintaining test capability during high‑priority manufacturing periods. This position also plays a key role in transitioning from manual testing to more automated systems.

What You’ll Do

Electrical Testing & Data Integrity

• Perform electrical testing on detector components using high‑vacuum systems (10⁻⁷ to 10⁻⁶ Torr).
• Maintain test stations and ensure data accuracy and traceability.
• Identify and escalate anomalies in test results.

Troubleshooting & Failure Analysis

• Diagnose electrical, mechanical, and vacuum‑related issues in detector assemblies.
• Conduct full mechanical and electrical teardowns.
• Investigate failure modes such as low gain, shorts, contamination, vacuum leaks, alignment issues, or component damage.

Manufacturing Support

• Work directly with cleanroom operators to resolve production issues quickly.
• Update work instructions, procedures, and test documentation.
• Train operators and new engineers on testing, teardown, and handling methods.
• Support yield improvement and scrap‑reduction initiatives.
• Track, analyze, and report yields, scrap rates, and defect trends.
• Provide day‑to‑day support across multiple product lines; occasional off‑shift work may be required.

Process Control & Continuous Improvement

• Use MINITAB for basic SPC, trend analysis, and yield monitoring.
• Support the transition from manual to semi‑automated test equipment.
• Identify opportunities to improve test repeatability, throughput, and data capture.
• Contribute to Lean Manufacturing, 5S, and SPC implementation.
• Promote adherence to ISO 9001‑based quality systems.

Equipment & Fixture Support

• Maintain and configure high‑voltage power supplies, vacuum controllers, electrometers, oscilloscopes, and custom fixtures.
• Assist in modifying fixtures or creating temporary setups to maintain production continuity.

Required Qualifications

• U.S. citizenship (required due to ITAR regulations).
• Bachelor’s degree in Engineering (Electrical, Mechanical, Materials, Physics, or related field).
• Hands‑on experience with high‑voltage systems, high‑vacuum equipment, precision instrumentation, or cleanroom operations.
• Strong mechanical aptitude and comfort working directly with hardware.
• Ability to troubleshoot electrical and mechanical issues methodically.
• Strong technical communication skills—written and verbal.
• Proficiency with MS Office, MRP systems, databases, and analytical/statistical tools.
• Ability to work full‑time onsite in an ISO 7 cleanroom environment.
• Willingness to learn specialized detector physics and test methods.

Preferred Qualifications

• Background in semiconductor, photonics, vacuum systems, electron optics, or detector technologies.
• Experience with SPC tools, MINITAB, or basic statistical analysis.
• Familiarity with high‑voltage power supplies, vacuum chambers, turbopumps, or electrometers.
• Experience assembling or disassembling delicate electro‑mechanical components.
• Understanding of gain behavior or noise mechanisms in electron‑multiplying devices (e.g., PMTs, MCPs, avalanche detectors).

Work Environment

• 100% onsite in a high‑tech manufacturing facility.
• ISO 7 cleanroom requiring gowning, gloves, and contamination‑control procedures.
• Work involves high‑voltage and high‑vacuum equipment; full safety training provided.
• Standard day shift with occasional support needed for urgent production issues.
• PPE such as safety glasses, gloves, and hearing protection may be required.