Engineering Jobs in Charleston Berkeley County Sc Remote

• 
  
• Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds.
  
• Reviews architectural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials.
  
• Communicates problems and issues to others for resolution. Integrates the activities of multiple engineering disciplines, outside consultants and government agencies.
  
• Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds.
  
• Reviews civil/structural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials.
  
• Communicates problems and issues to others for resolution.
  
• Develops moderately complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.).
  
• Facilitates the implementation of moderately complex improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs.
  
• Communicates problems and issues to others for resolution.
  
• Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the electrical phases of buildings, equipment installations, utility systems and grounds.
  
• Reviews electrical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials.
  
• Integrates the activities of multiple engineering disciplines, outside consultants and government agencies.
  
• Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the mechanical phases of buildings, equipment installations, utility systems and grounds.
  
• Reviews mechanical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials.
  
• Ensures accuracy of drawing archives/libraries by reviewing contractor redlines.
  
• Identifies errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements.
  
• Manages or supports construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance.
  
• Prepares and presents project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives.Produces or procures detailed design documents.
  
• Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters.
  
• Coordinates designs. Reviews and approves documents.
  
• Translates customer requirements into design options with documents and estimates.
  
• Identifies appropriate materials, equipment, and services by applying engineering principles and methodology.
  
• With limited supervision, develops and updates design standards and site-specific operating procedures in order to establish common practices.
  
• Provides input to strategic, short-term, and long-term infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts.
  
• Translates customer requirements into conceptual design by analyzing intended use/occupancy and desired aesthetics, conducting code research, developing preliminary design elements, determining interdisciplinary engineering support requirements, estimating resource costs/requirements, identifying materials, equipment, and services, and developing initial project schedule in order to establish project scope in response to customer requirements.
  
• Plans, manages, and executes projects. Leads a team of stakeholders in the acquisition and modification of assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies.
  
• Manages project expenditures within authorized budgets.
  
• Creates, maintains, and communicates project management information.
  
• Assists in the creation of contract scope.
  
• Ensures suppliers comply with all contract obligations.
  
• Interprets and analyzes applicable regulations, standards, codes, and ordinances with respect to project requirements.
  
• Offers project alternatives in order to assure compliance. Provides support, as required, to secure permits.
  
• Provide civil/structural engineering support for the manufacturing operations, including new construction projects, existing building modifications and machine foundations.
  
• Provide maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds.
  
• Reviews civil/structural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials
  
• Manages or supports construction projects by providing input on vendor selection; reviews contractor proposals; monitors project progress and vendor/consultant performance
  
• Review detailed design documents
  
• Review and approve documents
  

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is hiring for Electronic Systems Engineer (Lead or SME) to join the 787 Electronic Systems (Avionics, Integrated Modular Avionics, Network Systems, & Electrical Subsystems) team located in North Charleston, South Carolina.

As a member of the Electronic Systems team at BSC, you will develop and support these systems and their components in a sustaining production environment. Project examples include addressing design obsolescence, developing product improvements, supporting production build and test, supporting new customer introduction, and supporting the in-service fleet.

Position Responsibilities:

• Leads work with customers to develop and document complex electronic and electrical system requirements.
• Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
• Leads work to test and validate to ensure system designs meet operational and functional requirements.
• Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Researches technology advances for potential application to company business needs.
• Makes recommendations for technology investments.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics or Chemistry.
• 14 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications.

Preferred Qualifications (Desired Skills/Experience):

• ABET accredited degree
• Experience with DO-254 Airborne Electronic Hardware Development & Qualification
• Experience with DO-297 Integrated Modular Avionics Development & Qualification
• Experience with ARP-4754 Systems Development & Qualification
• Experience with DO-178 Airborne Software Development & Qualification

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range Lead (Level 5): $164,900 - $223,100

Applications for this position will be accepted until Apr. 16, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

787 Airframe in Boeing Commercial Airplanes is hiring for a Senior (Level 5) Structures Design Engineer for our Wing, Wing Edges, or Empennage teams to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer.

Primary Responsibilities:

• Provides oversight and direction to develop, integrate and document structural and interior payload system requirements to establish the system design.

• Leads development, maintenance and modification of structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.

• Leads performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications.

• Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals.

• Develops new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort.

• Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.

• Works under consultative direction.

This position is expected to be 100% onsite.  The selected candidate will be required to work onsite at the North Charleston, SC location.

Basic Qualifications (Required Skills/ Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• 12+ years of experience with aircraft structural design

• 9+ years of experience using CAD Tools on Model Based Definition for primary structures

• 9+ years of experience in program execution from concept development, design reviews, verification and qualification, hardware/software delivery and sustainment

• 6+ years of experience leveraging CATIA, ENOVIA, and PDM systems to support complex aerospace product design, configuration control, and lifecycle management.

• 3+ years of experience collaborating and performing oversight on projects with international partners/suppliers

• 3+ years of experience supporting test development and execution

• Part 21 and Part 25 Code of Federal Regulations subject matter expert knowledge

• Consultant level demonstrated autonomy while working with leadership and cross-functional technical teams

Preferred Qualifications (Desired Skills/Experience):

• 5+ years of experience as a Design Approval Engineer (DAE)

• 3+ years of lead experience using CATIA and Model Based Definition (MBD) for primary structure design

• 3+ years of lead experience designing and qualifying composite primary and secondary structures, including laminate design, ply-drop strategies, and structural strength considerations

• 3+ years of experience working in Product Development, Production, and Fleet phases of the Product Life Cycle

• 3+ years of hands-on experience with fabrication of metallic and composite structures

• 3+ years of experience interacting with Federal Regulators

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This role is for 1st shift, however, there may be additional shift requirements to support program objectives

Pay Range Summary:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only.  Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range for Senior (Level 5): $154,700 – $209,300

Applications for this position will be accepted until Apr. 16, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) 787 Airframe Team is seeking Mechanical & Structural Engineering Managers (Level K) to join our Systems Stress, Payloads Stress or Seats Stressteamsin North Charleston, SC.

As the Engineering Manager, you will lead a team of analysis engineers supporting the 787 Aircraft Systems or Payloads. The statement of work will include future design, factory and fleet support, as well as interaction with the supply chain. 

The ideal candidate is a proactive, servant-minded leader who fosters a positive, collaborative work environment through clear communication, mentoring, and coaching. They will effectively manage multiple concurrent initiatives including both short and long-term assignments, build strong cross-functional relationships and promote a culture of engineering excellence and safety. Using sound engineering judgment, this leader will guide their team to deliver efficient, practical solutions that satisfy product safety requirements and business objectives.

This position may require domestic and international travel as needed (approximately 10%) to support business and program goals.

Primary Responsibilities:

• Staff and budget planning, as well as implementing best practices in program management

• Develop and execute business plans, policies, and procedures while formulating organizational and technical strategies

• Acquire resources, provide technical management of suppliers, and spearhead process improvements

• Build and maintain relationships with customers, stakeholders, peers, partners and direct reports will be essential

• Provide oversight and approval of technical approaches, products and processes, while managing, developing, and motivating employees

• Mentor and develop team member's technical and leadership capabilities

• Help facilitate daily team stand ups utilizing OPD best practices

• Proactive collaboration with customers and support organizations, build positive relationships (i.e. LE, Prod. Engineering, Operations, Fleet Support teams)

• Manage daily team priorities to effectively utilize team resources

• Communicate with lead engineers, management and team members

• Establish clear RAA for lead engineers, foster and develop lead pipeline

• Develop and execute business plans, policies and procedures and develop organizational and technical strategies

• Support hiring of engineering team

• Provide technical guidance and oversite to team and partner

• Maintain and update BOE/EAC/LRBP tools and process

Basic Qualifications (Required Skills/ Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace, Aeronautical, or Material Sciences)

• 5+ years of experience in the Aerospace Industry

• 1+ years of experience leading cross-functional teams

• 1+ years of experience in using project management methodologies, including developing project plans, performance management, and managing issues and risks

• Experience managing projects and initiatives through to their completion/implementation hand-off point

Preferred Qualifications (Desired Skills/Experience):

• 3+ years of experience leading aerospace design engineering teams and integrating within a global supply base and product value streams

• 3+ years of experience with Boeing Commercial Airplanes

• Knowledge of Boeing products and processes

• Knowledge of Boeing 787 Aircraft Systems or Payloads or Seats

• Knowledge of Boeing Structural Analysis Methods

• Experience with commercial aircraft certification processes and regulations

• Demonstrated ability in team building, coaching, and employee development to enhance team performance and engagement

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range: $137,700 - $186,300

Applications for this position will be accepted until Mar. 24, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

787 Airframe in Boeing Commercial Airplanes is hiring for a Mid-Level (Level 3) or Experienced (Level 4) Structural Analysis Engineer for our Wing, Wing Edges, Empennage, Systems Stress, or Interiors Stress teams to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer.

Primary Responsibilities:

• Develops, integrates and documents structural requirements to establish the system design.

• Coordinates with other engineering groups to establish the product's environment.

• Guides product design and verifies structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance.

• Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications.

• Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied.

• Supports in-service products by investigating failures and analyzing improvements.

• Works under general direction.

This position is expected to be 100% onsite.  The selected candidate will be required to work onsite at the North Charleston, SC location.

Basic Qualifications (Required Skills/ Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• 5+ years of experience in the structural or aerospace industry

• 3+ years of experience performing structural analysis on metallic structures

• 2+ years of experience performing structural analysis on composite material systems

• 2+ years of experience working on primary aircraft structures

• 2+ years of experience collaborating and performing oversight on projects with international partners/suppliers

• 1+ years of experience supporting test development and execution

• Ability to apply classical hand analysis methods

• Ability to perform FEA and understand/utilize/validate results

• Prior experience with aircraft, heavy structures, hardware systems or interiors manufacturing/production systems

Preferred Qualifications (Desired Skills/Experience):

• Works under general direction.

• 5+ years of experience performing the primary responsibilities in a lead capacity working under minimal direction

• 2+ years of experience developing certification related documentation

• 2+ years of experience developing or leading test execution

• 1+ years of experience developing analytical processes or tools

• Current or prior DER/AR/E-UM

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This role is for 1st shift, however, there may be additional shift requirements to support program objectives

Pay Range Summary:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only.  Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range for Mid-Level (Level 3): $103,700 – $140,300

Summary pay range for Experienced (Level 4): $126,650 – $171,350

Applications for this position will be accepted until Apr. 16, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Payloads organization within Boeing Commercial Aircraft 787 Program is seeking experienced Experienced or Senior Design Engineers for a number of different positions in North Charleston, South Carolina.  The Payloads organization is responsible for everything you see when you fly; and a lot that you don’t: The Interior of the airplane, along with the Cargo compartments, exterior markings, associated systems, and cabin safety all make up Payloads. We are how our airline customers fulfill their mission and represent their brand.  Our organization is a fast paced, dynamic environment, which pulls from many engineering backgrounds.  The selected candidate will have a statement of work that spans the product lifecycle: supporting customer configuration development, supplier engagement, validating and verifying design requirements, integrating business needs, and supporting the product through the production and certification processes.  Your work will include the need to interface with other members of project engineering, production engineering, program/product teams, management, and technical staff to define and implement engineering solutions. You will be able to combine the expertise and resources of the interiors organization to certify and deliver the best interiors products within the industry.

Be part of the team that connects rigorous technical design to the future of air travel.

Our team is currently hiring for a broad range of experience levels including Experienced (Level 3) Senior (Level 4) Designer Engineers.

The Payloads organization within Boeing Commercial Aircraft 787 Program is seeking experienced Engineers for several different positions, including:

• BFE Monuments

• Lighting

• Monuments - Lavatories & Galleys

• Certification

• Configuration

• Production Integration - Process/Tools

• Livery

Position Responsibilities:

• Engineering support and project leadership within a production system

• Direct engagement working with/for aerospace suppliers or airlines

• Validating/demonstrating compliance to regulatory requirements

• Working with regulators

• Design for manufacturing

• Aircraft cargo compartment and handling system design, integration, and/or certification

• Works under general direction

• Assignment of final responsibility could be in any one of the following Interiors organizations listed above. Final determination will be based on best fit and alignment of experience.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• 3+ years of experience in engineering, including design, integration, and/or certification or equivalent combination of additional education and relevant experience.

Preferred Qualifications (Desired Skills/Experience):

• Level 4: 5+ years of experience in engineering, including design, integration, and/or certification or equivalent combination of additional education and relevant experience.

• Strong understanding and demonstrated experience with FAA Title 14 Part 25 and/or EASA equivalent.

• Experience in aerospace interiors, materials and properties, design criteria and release processes.

• 5+ years of experience in program or project management, leading project and/or program proposals of varying complexity (including: development and execution of schedule milestones, financial assessments, resource assessments, risk and/or issues management, etc.).

• Experience leading a cross-functional team.

• Demonstrates good problem solving skills and critical thinking

• Ability to use a variety of media to clearly convey information and ideas to a variety of audiences

• Demonstrated interest in continuous personal learning and development

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay Range Summary:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only.  Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range Experienced Level 3: $103,700 - $140,300

Summary pay range Senior Level 4: $126,650 - $171,350

Applications for this position will be accepted until Apr. 16, 2026

Export Control Requirements:

This is not an Export Control position.

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is seeking a Payloads Design Engineer (Associate or Experienced) to join our Interiors Responsibility Center South Carolina (IRCSC) team based in North Charleston, SC.

As an associate design engineer, you will have the opportunity to manage systems associated with airplane interiors including light limiting headers, closets, partitions, stow bins and wiring. The statement of work spans the product lifecycle: supporting customer configuration development, fabrication and manufacturing, validating and verifying design requirements, integrating business needs, and supporting the product through the production and certification processes. You will use your ability to combine the expertise and resources of the interiors organization to certify and deliver the best products within the industry.

Position Responsibilities:

• Assists to develop, integrate and document structural and interior payload system requirements to establish the system design

• Assists the performance of tests to validate and verify systems and components meet requirements and specifications

• Supports the management of supplier performance, test and production activities and coordinates with the supplier to optimize the design and achieve program goals

• Supports IRC production floor during first-of or complex builds

• Assists in the development of new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort

• Supports the investigation of emerging technologies to develop concepts for future product designs to meet projected requirements

• Develops, maintains and modifies payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods

Basic Qualifications (Required Skills/Experience)

• Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)

• 2+ years' related work experience or an equivalent combination of education and experience

Preferred Qualifications (Desired Skills/Experience)

• 5+ years of experience in aerospace engineering, design and engineering release processes

• 5+ years of experience with 3-D modeling (Autodesk Inventor, CATIA, SOLIDWORKS, SketchUp, Pro-E, 3DX, etc.) and/or equivalent combination of additional education and relevant experience

• Experience working within cross-functional engineering and production team

• Demonstrates good problem-solving skills and critical thinking

• Working knowledge of standard business software (MS Office Suite)

• Ability to meet plan delivery deadlines when assigned

• Understanding and demonstrated experience with FAA Title 14 Part 25 and/or EASA equivalent

Conflict of Interest:

Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. 

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. 

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations. 

Summary pay range Associate (Level 2): $90,000 - $110,000

Summary pay range Experienced (Level 3): $109,000- $134,200

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is hiring for Senior Product Review Engineers (Liaison Engineers) to join the 787 Production Engineering team located in North Charleston, SC.

This position includes a 9-to-12-month Boeing Training Rotation Program and will require a flexible schedule, which may involve assignments on 1st, 2nd, or 3rd shift, as well as occasional overtime, weekends, or holidays based on business needs.

The Product Review Engineers will perform/support troubleshooting, Root Cause Corrective Action (RCCA) technical analysis, and provide solutions to non-conforming products. They will work directly with cross functional and production engineering teams to meet production program objectives.

This position involves daily exposure to a factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of building.

Position Responsibilities:

• Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle
• Leads research of technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions
• Leads others to analyze, conduct root cause analysis and develop dispositions for design non-conformances
• Uses innovative approaches and unique applications to address complex nonconforming conditions and to detect deviations
• Analyzes reported problems for potential safety issues; recommends and manages complex resolutions. Leads development of interim and final solutions.
• Provides design phase subject matter expertise by supporting Integrated Product Teams (IPT) and participating in design reviews
• Represents the engineering community in the build through post-production environment
• Develops customer correspondence for continued safe operation and maintenance of equipment
• Leads activities for on-site disabled product repair teams and accident investigation or support teams
• Designs appropriate jacking and shoring schemes
• Leads the design of interim structural repairs and conducts static strength analysis
• Develops and leads non-destructive test procedures, tools and standards

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics or Chemistry. Applicants must have completed all degree requirements by the application date.
• 10+ years of Engineering experience
• 5+ years of experience in one or more of the following engineering fields: (airplane systems, aerodynamics, structures, propulsion, systems engineering, certification, or safety)
• 5+ years of experience in reading, interpreting, and generating electrical schematics and technical specifications 
• Experience with or knowledge of structural design principles for aircraft primary structure (e.g., fatigue, damage tolerance, corrosion, stress analysis, statics, materials strength, material characteristics, and repair techniques)
• Must be willing to work variable shifts, including weekends, holidays, and overtime

Preferred Qualifications (Desired Skills/Experience):

• ABET accredited degree
• 5+ years of experience working in a cross-functional environment
• Current or Previous Member of the Materials Review Board (MRB)
• Previous Aerospace or Marine repair, overhaul, maintenance, and/or engineering experience
• Experience troubleshooting complex integrated systems
• Experience interpreting and creating strength analyses for metals and composite materials
• Material Review Board Certification experience or similar Liaison Engineering experience.
• Aerospace experience, fabrications, manufacturing, and/or additive manufacturing experience.
• Experience working with Notice of Escapements (NOE) and Request for Customer Notifications (RCN)
• Production engineering experience
• Relevant technological knowledge
• Excellent problem-solving skills
• Ability to lead, work independently and in a team environment

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range: $126,650 - $171,350

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is hiring for Product Review Engineers (Associate or Mid-Level) (Liaison Engineers) to join the 787 Production Engineering team located in North Charleston, SC.

This position includes a 9-to-12-month Boeing Training Rotation Program and will require a flexible schedule, which may involve assignments on 1st, 2nd, or 3rd shift, as well as occasional overtime, weekends, or holidays based on business needs.

The Product Review Engineers will perform/support troubleshooting, Root Cause Corrective Action (RCCA) technical analysis, and provide solutions to non-conforming products. They will work directly with cross functional and production engineering teams to meet production program objectives.

This position involves daily exposure to a factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of building.

Our team is currently hiring for a broad range of experience levels including Associate (Level 2) and Mid-Level (Level 3) Product Review Engineers.

Position Responsibilities:

• Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle
• Analyzes, conducts root cause analysis and develops dispositions for design non-conformances
• Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions
• Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution
• Develops and implements product/process improvements
• Supports Integrated Product Teams (IPT) and participates in design reviews
• Represents the engineering community in the build through postproduction environment
• Ensures supplier and build partner compliance with Boeing standards
• Develops customer correspondence for continued safe operation and maintenance of equipment
• Participates in on-site disabled product repair teams and accident investigation or support team
• Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment
• Designs interim structural repairs and conducts static strength analysis. Develops non-destructive test procedures, tools and standards
• Conducts simple static strength analysis
• Develops and implements product/process improvements

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics or Chemistry. Applicants must have completed all degree requirements by the application date.
• 2+ years of experience in a professional engineering role
• 2+ years of experience in one or more of the following engineering fields: (airplane systems, aerodynamics, structures, propulsion, systems engineering, certification, or safety)
• 1+ years of experience in reading, interpreting, and generating electrical schematics and technical specifications 
• Experience with or knowledge of structural design principles for aircraft primary structure (e.g., fatigue, damage tolerance, corrosion, stress analysis, statics, materials strength, material characteristics, and repair techniques)
• Must be willing to work variable shifts, including weekends, holidays, and overtime

Preferred Qualifications (Desired Skills/Experience):

• Level 3: 5+ years of related work experience or an equivalent combination of education and experience
• ABET accredited degree
• Current or Previous Member of the Materials Review Board (MRB)
• Previous Aerospace or Marine repair, overhaul, maintenance, and/or engineering experience
• Experience troubleshooting complex integrated systems
• Experience interpreting and creating strength analyses for metals and composite materials

Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary Pay Range:

Associate Level (Level 2): $85,000 - $115,000

Mid-Level (Level 3): $103,700 - $140,300

Applications for this position will be accepted until Mar. 23, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Education

Bachelor's Degree or Equivalent Required

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

*At Securian Financial the internal position title is Infrastructure Dir."

Mission

"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."

Positioning

The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.

This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.

• Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.

• Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.

• Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.

Scope of Accountability

Resilience Engineering & Cloud Reliability

• Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.

• Own resilience automation, chaos testing, and IaC-based recovery validation.

• Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.

Quality Engineering & Continuous Testing

• Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.

• Drive automation-first testing (functional, non-functional, performance, resilience).

• Embed observability-driven quality validation and contract testing across services.

Performance, Capacity & Efficiency Engineering

• Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).

• Partner with Platform & Infrastructure teams to tune performance across application and platform layers.

• Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.

Cross-Domain Architecture Collaboration

• Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.

• Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.

• Engage Data Architects for data resilience, replication, and pipeline reliability.

• Work with Business Architects to align technical reliability goals with critical business outcomes.

Leadership & Talent Development

• Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.

• Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.

• Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.

Core Technical Competencies

• AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.

• Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.

• Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.

• Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.

• Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.

• Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.

• Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.

• FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.

Leadership Competencies

• Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.

• Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.

• Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.

• Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.

• Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.

Qualifications & Experience

• 12+ years in cloud engineering, reliability, or platform leadership roles.

• 5+ years leading Sr. Managers/Managers in technical domains.

• Proven expertise across AWS, with working knowledge of Azure and GCP.

• Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.

• Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.

• Certifications:

  • Required: AWS Certified Solutions Architect - Professional

  • Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect

Success Metrics

• 99.9% availability maintained for Tier-1 workloads.

• 100% coverage of DR automation for Tier-1 services.

• 25% annual increase in automated quality/test coverage.

• 15% annual improvement in resource efficiency and cost performance.

• Documented resilience participation across all enterprise architecture blueprints.

• Positive "technical peer readiness" and succession rating from Head of REO.

Summary Value Proposition

This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.

It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*

Position Summary:

Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.

Responsibilities include but not limited to:

• Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.

• Perform analysis, design, development, and integration on medium to high level complexity assignments.

• Develop and support automation capabilities through webservices and APIs.

• Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.

• Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.

• Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.

• Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.

• Document technical processes and contribute to knowledge sharing across the EPS team.

Qualifications:

• Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.

• 3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.

• Familiarity with SAP ICM/APM and ALM modules.

• Strong problem-solving skills and ability to manage multiple priorities.

• Excellent communication skills and ability to work cross-functionally.

• Experience with Agile methodologies and DevOps practices is a plus.

Preferred Qualifications:

• SAP Certification in relevant Modules

• Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices

• Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.

• Ability to work independently and as part of a collaborative team.

• Commitment to continuous learning and process improvement.

#LI-hybrid **This position will be in a hybrid working arrangement.**

Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.

The estimated base pay range for this job is:

Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.

Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:

Paid time off:

• We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.

• Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.

• Holidays: Securian provides nine company paid holidays.

Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.

Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.

Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.

Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:

• Mental Wellness and Disability

• Pride at Securian Financial

• Securian Young Professionals Network

• Securian Multicultural Network

• Securian Women and Allies Network

• Servicemember Associate Resource Group

For more information regarding Securian's benefits, please review our Benefits page.

This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.

Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).

To view our privacy statement click here

To view our legal statement click here

Job Title : Principal Mechanical Design Engineer

Job Family : Mechanical Design Engineering

Organization : Data Center Infrastructure Team

Location : Remote* OR Austin, TX

*Requires up to 30% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

• Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

• Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

• Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

• Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

• Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

• Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

• Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

• Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

• Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

• Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

• Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

• Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

• Lead mechanical design reviews and contribute to cross-functional design validation efforts.

• Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

• Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

• Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

• Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

• Conduct root cause analysis and corrective actions for mechanical failures or field issues.

• Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

• Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

• May perform other duties and responsibilities as assigned

How will you get here? 

Education :

• Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience :

• 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

• Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

• Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

• Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

• Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills

• Creative, self-motivated, accountable, and team-oriented

• Able to work independently with minimal oversight

• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

• Skilled in writing reports, business correspondence, and procedural guides

• Effective at presenting information and responding to management, clients, and public queries

• Capable of influencing others and sharing best practices

• Comfortable working as part of a global team

• Capable of assessing projects, articulating risks, and developing project milestones

• Familiar with stage-gate processes in project lifecycle management (PLCM)

• Able to mentor less experienced engineers

• Ability to travel both domestically and internationally up to 30%

Preferred Qualifications:  

• Master’s Degree in Mechanical Engineering

• Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

• Active Professional Engineer (PE) license.

• Knowledge of regulatory and safety standards applicable to data center infrastructure.

• Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus

Job Title : Principal Mechanical Design Engineer

Job Family : Mechanical Design Engineering

Organization : Data Center Infrastructure Team

Location : Remote* OR Austin, TX

*Requires up to 20% domestic and/or international travel (rare)

How will you make an impact?

We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.

What will you do?

• Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.

• Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.

• Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.

• Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).

• Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.

• Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.

• Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.

• Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.

• Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.

• Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts

• Select appropriate materials and fabrication methods to optimize cost, performance, and reliability

• Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.

• Lead mechanical design reviews and contribute to cross-functional design validation efforts.

• Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).

• Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.

• Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.

• Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.

• Conduct root cause analysis and corrective actions for mechanical failures or field issues.

• Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).

• Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)

• May perform other duties and responsibilities as assigned

How will you get here? 

Education :

• Bachelor’s Degree in Mechanical Engineering or related engineering discipline.

Experience :

• 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.

• Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).

• Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must

• Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required

• Excellent communication and cross-functional collaboration skills

Knowledge, Skills, Abilities:

• Excellent interpersonal and communication skills

• Creative, self-motivated, accountable, and team-oriented

• Able to work independently with minimal oversight

• Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations

• Skilled in writing reports, business correspondence, and procedural guides

• Effective at presenting information and responding to management, clients, and public queries

• Capable of influencing others and sharing best practices

• Comfortable working as part of a global team

• Capable of assessing projects, articulating risks, and developing project milestones

• Familiar with stage-gate processes in project lifecycle management (PLCM)

• Able to mentor less experienced engineers

• Ability to travel both domestically and internationally up to 30%

Preferred Qualifications:  

• Master’s Degree in Mechanical Engineering

• Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.

• Active Professional Engineer (PE) license.

• Knowledge of regulatory and safety standards applicable to data center infrastructure.

• Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus

JOB SUMMARY