Jobs in Broad Brook Connecticut

Do you want to become a surrogate? We are now offering a sign on bonus to all qualified and matched surrogates that sign contracts. The first step is to fill out our surrogate application. A fertility specialist will contact you to continue the process. For intended parents interested in surrogacy to start or grow their families please contact us today. The surrogacy process is complex, but we will be with you every step of the way. Call today to get started.

Women who may have the ability to produce eggs but are unable to use their uterus or do not have a uterus, may consider a surrogate. A donated egg may also be used with the surrogate in the event a woman cannot produce her own eggs or her uterus is not intact or insufficient to carry a pregnancy. In either case, the husband's sperm, if viable, may be used.

Using an egg donor unrelated to the surrogate carrier eliminates any biological tie. The egg of the surrogate is never used as part of the assisted reproduction process, so that a surrogate is never in the position of delivering her own biological child.

The basic requirements of a woman to serve as a surrogate are:

• Emotionally stable
• Responsible
• In good physical health
• Non-smoker
• Has had at least one successful pregnancy
• Is capable of carrying a child to full term

A woman is not required to fall within a particular age range to serve as a surrogate, but most intended parents prefer a surrogate under the age of 40. For more information on surrogacy please see the documents on the left side of this page.

In Texas, there is a judicial process for validating the Gestational Contract (the contract between the intended parents and the surrogate). Included within the various requirements for having a Gestational Contract validated by a Texas court is that the intended parents must be married and the surrogate must have previously carried a child to term. Additionally, there are residency requirements that apply to either the surrogate or the intended parents, but not both.

Compensation for a surrogate services generally starts in the range of $35,000 - $40,000, for base compensation with over all fees up to 70k, in many cases. The amount of compensation is dependent upon a variety of factors, including, but not limited to, whether the surrogate carries twins, what procedures a surrogate is required to undergo and whether the delivery is vaginally or by cesarean section.

The Final Inspection Apprentice position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.

Responsibilities:

• 
  
• Review all raw material and processing certifications IAW Customer and PO requirements.
  
• Utilize Material Release database to document quality review/activities.
  
• Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
  
• Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
  
• Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
  
• Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
  
• Perform tasks as assigned by Supervisor and/or Team Leader.
  

Physical Requirements:

• 
  
• Ability to lift 50 lbs.
  
• Ability to stand or sit for extended period of time.
  
• Fine motor skills with frequent hand and arm movement.
  
• Frequent twisting and bending.
  

Unusual Environmental Conditions:

• 
  
• Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
  

Required Personal Protective Equipment:

• 
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
  

Qualifications - Required

• 
  
• US Citizen
  
• High School Diploma or equivalent
  
• Minimum of 1 Year of Aerospace Inspection Experience
  
• Familiar with ISO / AS9100 requirements and/or Auditing Skills
  
• Basic math or industrial mathematics desired.
  
• Good written and verbal skills
  
• Basic computer skills
  
• Strong attention to detail and accuracy
  
• Strong problem-solving skills required
  
• Strong organizational skills required
  

This position is currently accepting applications.

Apply Now

Removes burrs and sharp edges or excess material from metal components including contouring certain edges and features.

Essential Duties & Responsibilities:

• 
  
• Removes excess metal and surface defects from aerospace hardware or machined surfaces using pneumatic or hand held abrasive wheels or belted grinding equipment.
  
• Uses abrasive belt or wheel according to customer specifications or type of finish specified, product being polished, or amount of metal to be removed, using knowledge of polishing operations and abrasives. Monitors abrasive wheel or belt for wear.
  
• Operates polisher, grinder, or deburring tools and removes metal and surface defects or contours edges of components based on specifications of blue-prints or work instructions.
  
• Inspects work for acceptability of finish. Moves finished components to next work station for further processing.
  
• Performs other work as assigned by the supervisor.
  

• Ability to lift or transfer components or objects of no more than 50 pounds.
• Understand and follow written and oral instructions in English and possess basic mathematical skills.
• Ability to read and interpret blueprints and assist in tooling and process development.
• Considerable ability to use a variety of hand and pneumatic tools.
• Ability to use precision hand held measuring devices, i.e., micrometer, vernier, go/no-go gauges, etc.
• Ability to use fine motor skills to manipulate small tools and perform meticulous work to close tolerances.
• Proficiently interacts with other employees and possess good interpersonal skills.

Education & Experience Required:

• High School diploma or GED
• 5+ years deburring experience or similar work involving fine polishing, grinding or contouring of metal parts in a manufacturing environment, preferably aerospace.

Working Conditions:

Light industrial work setting. Job involves lifting up to 50lbs. in a manufacturing environment that may occasionally require the employee to work in a number of awkward positions.

EOE Statement:

PCX Aerosystems is an equal opportunity employer.

This position is currently accepting applications.

Apply Now

In the aerospace industry, a Program Manager serves as the central bridge between design engineering and full-scale manufacturing. This role is high impact, requiring a strategic thinker who can navigate complex technical requirements and rigorous regulatory standards to ensure products are optimized for both scalability and efficiency.

Core Responsibilities

• 
  
• Project Lifecycle Leadership: Own the execution of new products from initial design handoff through prototyping, pilot builds, and final transition to production.
  
• Cross-Functional Coordination: Lead integrated teams across engineering, supply chain, quality, and finance to ensure alignment of program goals.
  
• Resource & Budget Management: Work with cross functional groups to develop end-to-end manufacturing plans, including detailed schedules, resource allocation, and budget oversight to maintain project costs within 5-10% of estimates.
  
• Risk & Change Mitigation: Proactively identify delivery risks, manage engineering changes through disciplined configuration control, and develop contingency plans for roadblocks.
  
• Operational Readiness: Ensure manufacturing systems, tooling, and supply chains are ready for high-volume production, including making critical "make/buy" decisions.
  
• Stakeholder Management: Act as the primary point of contact for customers, providing regular status updates on milestones, KPIs, and delivery performance.
  

Required Qualifications

• 
  
• Education: A Bachelor's degree in Engineering (Mechanical, Industrial, or Aerospace), Business Management, or Operations Management is typically required.
  
• Experience: At least 3-7 years of experience in aerospace manufacturing or a similar fast-paced engineering environment.
  
• Certifications: PMP (Project Management Professional) certification is frequently preferred or required to demonstrate formal methodology expertise.
  
• Technical Proficiency: Deep understanding of manufacturing processes (e.g., precision machining, assembly), ERP/MRP systems, and product lifecycle management (PLM) tools.
  
• Regulatory Knowledge: Familiarity with Aerospace Quality & Compliance standards (such as AS9100 or FAA regulations) is often essential.
  

Key Performance Indicators (KPIs)

Aerospace NPI managers are often measured by their ability to:

• 
  
• Consistently meet Contract Ship Dates for complex projects.
  
• Achieve On-Time Delivery (OTD) and milestone completion targets.
  
• Maintain high Quality Standards and production yields during the ramp-up phase.
  

This position is currently accepting applications.

Apply Now

The Lean Specialist will drive operational excellence by identifying, analyzing, and eliminating waste across business processes. This role involves leading cross-functional teams, implementing Lean methodologies (such as 5S, Kaizen, VSM), and fostering a culture of continuous improvement to enhance productivity, quality, and cost savings.

Key Responsibilities

• 
  
• Process Improvement: Lead, facilitate, and support Lean Six Sigma projects and Kaizen events to streamline operations, reduce defects, and improve flow.
  
• Value Stream Mapping (VSM): Conduct detailed VSM to analyze current state, map future state, and identify inefficiencies (waste).
  
• Training & Coaching: Provide coaching and training to staff on Lean tools, principles, and standard work to embed a continuous improvement mindset.
  
• Data Analysis & Reporting: Utilize data-driven insights and statistical tools to measure KPI improvements, tracking savings and results for senior management.
  
• Standardization: Implement and sustain 5S, Kanban, and Standard Operating Procedures (SOPs) to ensure consistent, efficient performance.
  
• Gemba Walks: Perform regular Gemba walks to identify abnormalities, support employees on the shop floor, and identify improvement opportunities.
  
  

Key Skills & Qualifications

• 
  
• Lean Expertise: Deep understanding of Lean principles, Six Sigma methodologies, Kaizen, and waste reduction techniques (8 Wastes).
  
• Analytical Skills: Strong ability to analyze complex data sets to identify trends, root causes, and solutions, with proficiency in tools like Excel, Minitab, or Visio.
  
• Project Management: Proven ability to manage multiple projects simultaneously from inception to completion.
  
• Leadership & Change Management: Exceptional ability to lead cross-functional teams and drive cultural change within an organization.
  
• Communication: Excellent verbal and written skills to interact with diverse groups, including shop floor staff and executive leadership.
  
• Facilitation: Ability to lead workshops and brainstorming sessions effectively.
  

Education & Experience Requirements

• 
  
• Education: Bachelor's degree in Engineering, Business Administration, Operations Management, or a related field.
  
• Experience: 3-5+ years of experience in Lean manufacturing, operational excellence, or continuous improvement roles.
  
• Certification: Lean Six Sigma Green Belt or Black Belt certification is highly desirable.
  

This position is currently accepting applications.

Apply Now

This position builds the operator's skills and knowledge to efficiently perform and maintain the manufacturing processes vertical and horizontal multi-axis turning machines to produce precision aerospace components.

Responsibilities:

• 
  
• Perform set up and operate vertical and horizontal multi-axis turning machinery as required with supervision.
  
• Use manual inspection equipment as required, e.g. height stands, micrometers, indicators, dial bores, verniers, etc.
  
• Work with aerospace materials such as aluminum, stainless steel, magnesium, titanium, and nickel alloys.
  
• Read/interpret operation sheets and work instructions.
  
• Adhere to established policies and company procedures and standard work.
  
• Participate in process improvement initiatives utilizing lean manufacturing tools and techniques.
  
• Document and communicate manufacturing performance issues to maintain continuity between shifts and decrease machine downtime.
  
• Maintain work areas and equipment in a clean and orderly condition.
  
• Follow all safety policies, rules and regulations.
  
• Other duties as assigned by Leads, Supervisors and/or Managers.
  

Physical Requirements:

• 
  
• Ability to stand or sit for extended period of time on a concrete manufacturing floor.
  
• Fine motor skills with frequent hand and arm movement.
  
• Ability to lift up to 50 pounds.
  
• Moderate twisting and bending.
  
• Moderate climbing on step stools or platforms.
  
• Unusual Environmental Conditions:
  
• Loud machining environment; exposure to aerospace metals, lubricants and chemicals.
  
• Required Personal Protective Equipment:
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, gloves, hearing protection may be required or other protective equipment as needed.
  

Qualifications:

• 
  
• US Citizen
  
• High School Diploma or equivalent.
  
• Technical school graduate in machining or two years of CNC experience.
  
• Aerospace experience preferred.
  
• Basic understanding of math or industrial mathematics.
  
• Good written and verbal skills.
  
• Basic computer skills.
  
• Ability to read technical drawings.
  
• Ability to set, use or setup various measuring devices.
  
• Solid problem solving skills.
  

This position is currently accepting applications.

Apply Now

Our Crew Members create a warm and friendly shopping experience in our stores. We answer questions, offer suggestions, and ensure our customers know they are welcomed and cared for. We entertain customers and make grocery shopping an exciting adventure.

Some responsibilities may include:

• Working on teams to accomplish goals
• Operating the cash register in a fun and efficient manner
• Bagging groceries with care
• Stocking shelves
• Creating signage to inform and delight customers
• Helping customers find their favorite products

You'll learn a lot. You're not stuck doing one task here. Each Crew Member contributes to creating a WOW customer experience by participating in all aspects of the job.

If you have experience in art including penmanship, working with chalk, and large signage, that's a plus.

If you have a passion for people and a fervor for food, we'd love to meet you. We can teach you the rest.

Stores have the greatest need for people that can work evenings and weekends.

Trader Joe's is an equal-opportunity employer and is committed to hiring a diverse Crew.

The Final Inspector position is primarily responsible for inspecting and recording dimensions of aerospace components per process sheets, Inspection reports, Blueprints and applicable specifications utilizing specified gages and methods to ensure the quality requirements are met prior to presenting the final aerospace component to the customers.

Responsibilities:

• 
  
• Review all raw material and processing certifications IAW Customer and PO requirements.
  
• Utilize Material Release database to document quality review/activities.
  
• Visual and dimensional verification (inspection) to requirements utilizing: micrometers, calipers, bore gages, thread gages, and other inspection equipment as required.
  
• Review and acceptance of Travelers to assure all sign-off complete and revision levels are to Operation Book Requirements.
  
• Presentation of inspected/received parts to various customer representatives and the resolution to any customer questions or concerns.
  
• Initiation of Discrepancy Reports, internal and external for products not meeting drawing requirements.
  
• Perform tasks as assigned by Supervisor and/or Team Leader.
  

Physical Requirements:

• 
  
• Ability to lift 50 lbs.
  
• Ability to stand or sit for extended period of time.
  
• Fine motor skills with frequent hand and arm movement.
  
• Frequent twisting and bending.
  

Unusual Environmental Conditions:

• 
  
• Loud machining environment; exposure to aerospace metals, lubricants, and chemicals.
  

Required Personal Protective Equipment:

• 
  
• Safety glasses/shields, appropriate manufacturing closed toed footwear, hearing protection may be required or other protective equipment as needed.
  

Qualifications - Required

• 
  
• US Citizen
  
• High School Diploma or equivalent
  
• Minimum of 1 Year of Aerospace Inspection Experience
  
• Familiar with ISO / AS9100 requirements and/or Auditing Skills
  
• Basic math or industrial mathematics desired.
  
• Good written and verbal skills
  
• Basic computer skills
  
• Strong attention to detail and accuracy
  
• Strong problem-solving skills required
  
• Strong organizational skills required
  

This position is currently accepting applications.

Apply Now

**$2500 SIGN-ON BONUS**

Essential Duties & Responsibilities:

• 
  
• Set-up and operate Horizontal and Vertical CNC Lathes with Fanuc controls according to engineering specifications, instructions, GD&T and operation sheets. Knowledge of manual machines is a plus.
  
• Select appropriate cutting tools, fixtures and tool holders for a given job.
  
• Run similar jobs of short cycle times for extended periods of time where manufacturing processes are stable and do not require frequent change.
  
• Read and interpret engineering instructions, travelers, and blueprints and be familiar with geometric tolerances and principles.
  
• Operate more than one machine at a time, one to two machines depending on the nature of the job and its complexity, occasionally operating more than two machines depending on operator skill and familiarity with a given job.
  
• Must perform routine maintenance on assigned production equipment, i.e., maintain cleanliness of work area and machinery, check machinery fluids and alert maintenance personnel and/or supervisor of malfunctions.
  

Operate lifting and handling equipment such as hand truck, pallet jack, or overhead hoist to maneuver in-process or finished components to desired location.

Required Knowledge, Skills, & Abilities:

• 
  
• Knowledgeable of in-process inspection techniques, standards, and requirements. Able to use and interpret precision measuring devices such as micrometers, verniers, and various hand tools, i.e., gauges to verify the accuracy of dimensional characteristics of components.
  
• Knowledge of metal characteristics in a production setting is desirable.
  
• Knowledge of programming code, canned cycles, threading & boring jaws and makes program edits.
  
• Machinists must have good verbal and written communication skills; good math skills and good interpersonal skills. Must work well with colleagues, supervision and management.
  

Education & Experience Required:

• 
  
• 7 - 10 years Vertical or Horizontal CNC Lathe machining experience in a manufacturing environment, preferably aerospace.
  
• Fully capable of reading, understanding, and following written and oral work instructions in English.
  
• Ability to lift or transfer components or objects of no more than 50 pounds.
  
• HS diploma or GED.
  

This position is currently accepting applications.

Apply Now