Jobs in Beverly, WV
85 positions found
U
Marine Interdiction Agent
✦ New
Salary not disclosed
NEW RECRUITMENT AND RETENTION INCENTIVES! Air and Marine Operations (AMO), a component of U.S.
Customs and Border Protection (CBP) offers those with Merchant Mariner Credentials the exceptional opportunity of a career in law enforcement working with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission protecting America.
If you're looking for an exciting and rewarding job that also provides great pay, benefits, and job stability, now is the time to make your move: become a Marine Interdiction Agent .
AMO is actively seeking applicants to fill full-time security-based positions with the nation's largest law enforcement organization charged with maintaining the security of our national borders while facilitating lawful international travel and trade.
DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW! Salary and Benefits Begin your career as a Marine Interdiction Agent (MIA) and make up to $73,939–$96,116 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location.
Recruitment Incentive: New hires that are eligible may receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102.
Eligibility will be determined by Human Resources.) Example annual compensation for the first three years at our CAMB and subordinates new-hire locations (RUS LEAP 25% Retention Incentive).
GS-11 1st year annual pay
- $102,424 GS-12 2nd or 3rd year annual pay
- $132,931 GS-13 3rd year of annual pay
- $158,075 Example annual compensation for the first three years at our Key West, Key Largo, and Marathon, FL new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $108,431 GS-12 2nd or 3rd year annual pay
- $141,575 GS-13 3rd year of annual pay
- $168,352 Example annual compensation for the first three years at our Long Beach, CA new-hire locations (Locality Salary Table LEAP 25% Retention Incentive) GS-11 1st year annual pay
- $107,749 GS-12 2nd or 3rd year annual pay
- $154,974 GS-13 3rd year of annual pay
- $184,285 This career ladder position has a grade level progression of GS-11, GS-12 and GS-13.
You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52-weeks at each grade level (with supervisor approval) and any additional training, licensing, and certification requirements.
Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.
Recruitment Incentive (RI): Upon Entrance on Duty (EOD), you may be eligible to receive a Recruitment Incentive LEAP: Law Enforcement Availability Pay (25% Everyone) RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) Locations, Key Largo, FL, Key West, FL, Marathon, FL and Long Beach, CA)
*Retention Incentive is contingent on eligibility.
Eligibility will be determined by Human Resources Duty Locations A duty location will be offered after successful completion of the pre-employment process.
The duty location listed in the final offer letter may include any geographic location within the Southwest Region, Southeast Region or Caribbean Air and Marine Branch.
Note: Your opportunity for final selection is increased based on your flexibility to Enter on Duty at priority duty location.
Current possible duty locations include: Southeast Region: Fort Lauderdale, Miami and Marathon, FL and CAMB: Fajardo, Mayaguez, Ponce, and San Juan PR; and Saint Thomas, VI Northern Region: Bellingham, WA Limited Duty Locations as of – 1 2/1/2025 Applying to this JOA does not guarantee any of the locations listed below will still be available once you've completed the pre-employment process.
Locations are offered based on the current needs of the service at that time.
Northern Region: Port Huron, MI Southeast Region: Houma, LA Southwest Region: San Diego, CA Duties and Responsibilities As a Marine Interdiction Agent, you will perform marine-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States.
Typical duties may include: Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
Interpreting radar data to calculate appropriate intercept while tracking vessels and people to a successful interdiction.
Searching persons, vessels, baggage, and cargo for contraband or weapons incidental to detention or arrest.
Collecting, refining, and analyzing strategic and tactical intelligence.
Qualifications This GS-11 grade level position has a selective factor: As a minimum qualification requirement all candidates must have a qualifying Merchant Mariner Credential.
See the U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC) section that is listed below for qualifying capacities.
You qualify for the GS-11 grade level if you possess one (1) year of specialized experience equivalent to at least the next lower grade level, performing duties such as: Independently applying advanced skill in controlling/commanding law enforcement scenes to include conducting searches, making arrests, processing arrests and seizure of evidence and property.
Conducting investigative inquiries using various techniques, examining files and records, physical and documentary evidence to identify logical conclusions.
Utilizing cameras and other electronic high-tech surveillance equipment to gather evidence, collect, evaluate, and then preserve that physical and documentary evidence.
Highly skilled in writing comprehensive arrest, criminal and incident reports.
Assisting government or state attorneys in preparation for court cases or grand juries, testifies as a law enforcement officer in court proceedings, and administrative forums.
Considerable experience applying arrest authorities and constitutional law in various alleged criminal situations, or knowledge and experience of CBP laws, regulations, policies, legal precedent.
OR GS-11 Education Substitution for experience: A Ph.D.
or equivalent doctoral degree, three (3) full years of progressively higher-level graduate education leading to such a degree, or LL.M.
OR Combining Experience and Education: A combination of successfully completed post-bachelors' education (above) and experience.
This will be calculated using your resume and unofficial transcripts submitted with your application.
AND U.S.
Coast Guard Issued Merchant Mariner Credentials (MMC): You must submit a valid, legible copy of your Merchant Mariner Credential at time of application.
Your copies must include the expiration and capacity pages of your MMC.
Qualifying Capacities are Operator of Uninspected Passenger Vessel (OUPV), Mate of 200 gross tons or greater (Inland, Great Lakes, Near Coastal or Oceans), Chief Mate, Second Mate, and Third Mate Unlimited Oceans or Master of 25 GRT or greater (Inland, Great Lakes, Near Coastal or Oceans) OR An Accepted MMLD Application: You must submit proof an accepted MMLD application, for a MMC with a qualifying capacity, and a credential status that is in a positive standing.
It cannot be pending additional information for MMLD application process.
You must have your Official MMC Credential in hand at the time of scheduling and at assessment appointment.
NOTE: Your resume must explicitly indicate how you meet this requirement, otherwise you will be found ineligible.
Please see the "Required Documents" section below for additional resume requirements.
Other Requirements Citizenship : You must be a U.S.
Citizen to apply for this position.
Residency : You must have had primary U.S.
residency (includes protectorates as declared under international law) for at least three of the last five years.
Age Requirement: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions.
Candidates must be referred for selection to the Border Patrol Agent position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03.
The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
AGE WAIVER: Creditable law enforcement officer service
- Covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d), or creditable service covered by Title 5 U.S.C.
8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement.
This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C.
8336(c) or Title 5 U.S.C.
8412(d).
Veterans' Preference Eligibility
- To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v.
Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C.
3312.
You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.
Training : This position has a training requirement.
You may be required to successfully complete the training requirement as a condition of employment.
Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.
Travel Required: You may be expected to travel for this position based on operational needs.
How to Apply Click the Apply button on this site.
You will be linked to the CBP Talent Network registration page.
For Position of Interest select Air and Marine Operations (Marine Interdiction Agent (MIA)), then complete the pre-screening questions.
You'll then receive a link(s) to the MIA Job Opening Announcements (JOAs) on USAJOBS, the federal government's official employment site, to complete your application.
Be certain to review ALL details of the job opening announcement and follow all instructions in the application process.
As a subscriber to the CBP Talent Network, you'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.
L
Locum Physician (MD/DO) - Emergency Medicine in Elkins, WV
✦ New
Salary not disclosed
Doctor of Medicine | Emergency Medicine
Location: Elkins, WV
Employer: Weatherby Healthcare
Pay: Competitive weekly pay (inquire for details)
Shift Information: 3 days x 12 hours
Start Date: ASAP
About the Position
LocumJobsOnline is working with Weatherby Healthcare to find a qualified Emergency Medicine MD in Elkins, West Virginia, 26241!
If you are seeking a new opportunity or would simply like to learn more about locum tenens, give Weatherby a call today for details.
- 12 hr shifts with 36 hours of physician coverage daily
- 30,000 annual volume
- Emergency department with 15 beds
- PALS and ACLS certification required
- PA coverage available for 12 hours
- Trauma 5 state verified facility
- Paid malpractice insurance; pre-paid travel and housing expenses
- Assignment details and time entry in online portal
- Competitive compensation
- 24-hour access to your Weatherby Healthcare consultant
- Charter member of NALTO
About Weatherby Healthcare
Weatherby Healthcare is part of the CHG Healthcare family of staffing companies, which leads the locum tenens industry in size and quality. Since 1995, we’ve leveraged our nationwide network to connect locums professionals with the best jobs. We offer specialty-focused consultants for nearly 100 specialties of physicians, PAs, and NPs. These experts simplify the locums process from start to finish, backing you up with award-winning 24/7 support. In addition to providing competitive pay and malpractice coverage, we assist you with credentialing, licensing, travel, and housing. To learn more about how we make your life easier, visit
1701441EXPPLAT
L
Locum Physician (MD/DO) - Obstetrics and Gynecology in Elkins, WV
✦ New 🏢 LocumJobsOnline
Salary not disclosed
Doctor of Medicine | Obstetrics and Gynecology
Location: Elkins, WV
Employer: Adelphi Locums
Pay: Competitive weekly pay (inquire for details)
Start Date: ASAP
About the Position
LocumJobsOnline is working with Adelphi Locums to find a qualified Obstetrics and Gynecology MD in Elkins, West Virginia, 26241!
JOB OVERVIEW
- Job Title: Obstetrics/Gynecology Physician
- Job Type: Locum Tenens
- Location: Elkins, WV
- Service Setting: Inpatient/Outpatient
- Coverage Type: Clinical + Call
- Coverage Period: 04/16/2026 Ongoing (6-month contract)
- Clinical Shift Schedule: Mon-Fri; 8a-4:30p
- On-Call Shift Schedule: 24-hour call coverage COVERAGE DATES
- Starting 04/16/2026 Ongoing
- Estimated coverage need: 510 shifts per month
PATIENT INFORMATION
- Patient Demographics: Obstetric and Gynecologic patients
- Admissions: Yes
- Case Mix: Comprehensive labor and delivery coverage in a Level IV trauma hospital; IUD insertion and removal, Nexplanon insertion and removal, colposcopy, endometrial biopsy, LEEP procedures, vulvar biopsy, and incision and drainage of Bartholin cysts are routinely performed, along with comprehensive routine gynecology care. In addition, full-scope routine obstetrical services are provided, including prenatal management, delivery support, and postpartum care.
FACILITY INFORMATION
- No. of Beds in Department: 110
- Trauma Level: Level IV Trauma Center
- EMR System: Paragon
- Office Equipment Available: Standard labor and delivery and surgical equipment
- Specialty Backup Available: Hospital-based support services
- Support Staff Available: Operating Room staff and Labor & Delivery staff
- Reason for Coverage: Supplemental locum call coverage
PRIVILEGES & COMPLIANCE
- Hospital Privileges Required: Yes
- Temporary Privileges Available: IMLC or temporary license accepted
- Credentialing Timeline: Approximately 60 days
COMPENSATION & BENEFITS
- Travel, Lodging, and Malpractice Insurance: Covered REQUIRED PROCEDURES
- Vaginal and cesarean deliveries
- Management of obstetric emergencies
- Gynecologic procedures as required during call
- Inpatient OB/GYN consults and surgical management
JOB REQUIREMENTS
- Licenses: Active West Virginia license required; IMLC accepted
- Board: Board Certified in Obstetrics and Gynecology required
- DEA: Required
- Certifications: BLS and ACLS required
- Experience: Minimum 1 year OB/GYN experience required
- Other Qualifications: Ability to independently manage comprehensive labor and delivery coverage
DUTIES & RESPONSIBILITIES
- Provide 24-hour OB/GYN call coverage
- Manage labor and delivery patients and obstetric emergencies
- Perform gynecologic procedures as clinically indicated
- Evaluate and manage inpatient OB/GYN consults
- Collaborate with L&D and OR staff to ensure continuity of care
- Document patient encounters and procedures in Paragon EMR
About Adelphi Locums
Adelphi Locums, a brand of Adelphi Staffing, provides locum tenens staffing solutions for healthcare facilities across the U.S., connecting them with qualified physicians, advanced practitioners, and other medical professionals for temporary coverage needs.
1709869EXPPLAT
Assembler Installer Cable Controlled Systems B - 30204
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes.
Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications.
You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work.
Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.Use a tension meter to set cable tension according to specifications.Conduct reaming and riveting as necessary to complete work assignments.Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.Locate work areas using drawings or paperwork that specify airplane and section numbers.Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.Disassemble parts and deburr holes to prepare for fastener installation.Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.Install cable control pulleys and rig control cables according to drawings and specifications.Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:Experience using hand tools and/or hand-held power toolsExperience working with safety and quality processes and procedures.Basic Computer experience and competency.Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.
Preferred Qualifications:Experience reading and interpreting drawings, specifications,material processes, schematic and diagramsAttended a Boeing partnered manufacturing related high school orPreferred community and technology college academic programTypical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range: $24.32 – $53.30Applications for this position will be accepted until Sept.
04, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes.
Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications.
You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work.
Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.Use a tension meter to set cable tension according to specifications.Conduct reaming and riveting as necessary to complete work assignments.Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.Locate work areas using drawings or paperwork that specify airplane and section numbers.Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.Disassemble parts and deburr holes to prepare for fastener installation.Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.Install cable control pulleys and rig control cables according to drawings and specifications.Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:Experience using hand tools and/or hand-held power toolsExperience working with safety and quality processes and procedures.Basic Computer experience and competency.Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.
Preferred Qualifications:Experience reading and interpreting drawings, specifications,material processes, schematic and diagramsAttended a Boeing partnered manufacturing related high school orPreferred community and technology college academic programTypical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range: $24.32 – $53.30Applications for this position will be accepted until Sept.
04, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Numerical Control Multiple Tool - Milling Machine Operator - C4608
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Numerical Control Multiple Tool
- Milling Machine Operator to join our Fabrication team in Everett and Renton, Washington.As a Numerical Control Multiple Tool-Milling Machine Operator, your role will involve operating advanced milling machines with precision, ensuring that all components are produced to the highest standards.
You will be responsible for maintaining a safe working environment by adhering to established safety protocols and best practices while preparing and adjusting machinery for optimal performance.
Your attention to detail and ability to interpret technical documents will be essential in ensuring that every part meets stringent specifications.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Set up, operate, and adjust numerically controlled milling machines, utilizing various control media, program documents, holding fixtures, and cutting tools, or manually entering required data to meet quality requirementsObtain information from drawings, documents, sketches, and verbal instructions to prepare for machining operationsMake necessary preparations and adjustments to ready the machine for operation, including installing various cutting tools during machining cycles as authorizedUse measuring instruments and gauges to check cutting tools and parts for conformance to specifications and printsAssist planners or programmers in determining the final numerical control program as authorizedMount and check cutting tools in holders, ensuring proper loading in machine magazines or spindlesInitiate requests for corrective action in the event of machine malfunctions and detect faulty tools, taking corrective action in accordance with shop practicesLoad, preload, and manually position fixtures at designated program stopsPhysical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbsEngage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squattingWork in environments that may involve contact with metals, solvents, and coolantsOperate in proximity to moving parts and tools, sharp cutters, and potential slipping hazardsAdapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job dutiesThis position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.62 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications1+ Years of experience using precision measuring tools1+ Years of experience as a machine operator, writing and editing CNC programs1+ Years of experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications1+ Years of experience reading and interpreting blueprint and assembly instructions or drawings1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine toolsAbility to lift, push, and pull up to 35 poundsPreferred Qualifications:Experience working with and around hazardous materials (while using the proper protective equipment)Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expenseDrug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $31.32/hour, with the potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Mar.
31, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Numerical Control Multiple Tool
- Milling Machine Operator to join our Fabrication team in Everett and Renton, Washington.As a Numerical Control Multiple Tool-Milling Machine Operator, your role will involve operating advanced milling machines with precision, ensuring that all components are produced to the highest standards.
You will be responsible for maintaining a safe working environment by adhering to established safety protocols and best practices while preparing and adjusting machinery for optimal performance.
Your attention to detail and ability to interpret technical documents will be essential in ensuring that every part meets stringent specifications.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Set up, operate, and adjust numerically controlled milling machines, utilizing various control media, program documents, holding fixtures, and cutting tools, or manually entering required data to meet quality requirementsObtain information from drawings, documents, sketches, and verbal instructions to prepare for machining operationsMake necessary preparations and adjustments to ready the machine for operation, including installing various cutting tools during machining cycles as authorizedUse measuring instruments and gauges to check cutting tools and parts for conformance to specifications and printsAssist planners or programmers in determining the final numerical control program as authorizedMount and check cutting tools in holders, ensuring proper loading in machine magazines or spindlesInitiate requests for corrective action in the event of machine malfunctions and detect faulty tools, taking corrective action in accordance with shop practicesLoad, preload, and manually position fixtures at designated program stopsPhysical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbsEngage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squattingWork in environments that may involve contact with metals, solvents, and coolantsOperate in proximity to moving parts and tools, sharp cutters, and potential slipping hazardsAdapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job dutiesThis position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.62 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications1+ Years of experience using precision measuring tools1+ Years of experience as a machine operator, writing and editing CNC programs1+ Years of experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications1+ Years of experience reading and interpreting blueprint and assembly instructions or drawings1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine toolsAbility to lift, push, and pull up to 35 poundsPreferred Qualifications:Experience working with and around hazardous materials (while using the proper protective equipment)Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expenseDrug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $31.32/hour, with the potential to earn up to $59.47/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Mar.
31, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Principal Guidance Navigation and Control Engineer - Flight Controls
✦ New 🏢 Boeing
$182,000
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.The Boeing Company is looking for Principal Guidance Navigation and Control Engineer to support the Flight Controls team in Everett, Washington.Position Overview:We are seeking accomplished, self-motivated engineers to design, analyze, test, and certify flight control systems and components for large commercial aircraft. In addition to supporting production and fleet operations, you will be part of a team driving the development of new derivative airplanes and preparing for the next generation of more capable, efficient, and safer airliners.We foster a collaborative environment where every team member prioritizes safety and recognizes the profound significance of their contributions to the aviation industry. Our strong emphasis on teamwork and a robust safety culture is not just a value; it is essential to our mission. By cultivating a culture that values collaboration and safety, we ensure that our commitment to excellence resonates throughout our organization, ultimately enhancing the trust and confidence placed in us by those who fly. If you are passionate about making a difference and thrive in a dynamic environment where your contributions are recognized, we invite you to apply today and join our team!Position Responsibilities:Resolve airplane level requirements into system level requirements and resolve system level requirements into component requirements with time and cost efficient validation methods.Develop and evaluate system and subsystem architecture alternatives to meet project objectives and requirements.Conduct trade studies to analyze and compare alternatives, rapidly converging on preferred configurations through system simulations and development test programs.Lead and participate in system, component, and detailed design efforts, ensuring thorough documentation and adherence to schedule and cost constraints to produce error-free, manufacturable specifications and drawings.Lead and support system- and component-level validation activities, including test plan development, consultation on iron bird and test rig setups, test monitoring, analysis, report authoring, supplier test report review and approval, failure analysis, and mitigation strategies.Drive certification efforts by creating required artifacts such as system safety analyses, failure modes and effects analyses (FMEA), and fault tree analyses (FTA); ensure traceability to regulatory requirements and resolve any regulatory conflicts.Support ongoing production by promptly addressing build issues at Boeing and supplier facilities, identifying and implementing design improvements to enhance build accuracy, production rate, and line safety, and resolving rejections, functional test failures, and flight squawks.Provide subject matter expertise to support global fleet operations, responding to airline and regulator inquiries, leading resolution of Service Related Problems (SRPs), and analyzing flight incidents to inform Safety Review Board (SRB) recommendations for the Continued Operational Safety Program (COSP).Collaborate effectively across functions and organizations within and outside Boeing, including manufacturing, avionics, crew operations, airplane safety, aerodynamics, supply chain management, BCA systems software, suppliers, airline customers, and regulatory agencies.Work Authorization:This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Everett, WA.Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in electrical or computer engineering.10+ years of experience with Guidance, Navigation, and Control engineering.Current FAA Commercial Pilot license.Preferred Qualifications (Desired Skills/Experience):Knowledge/Experience with ARP 4754 and ARP 4761.Experience with flight controls system and component architecture.Experience in requirements development, design, analysis, and verification & validation of flight control systems.Experience using requirement management tools such as IBM Rational DOORS.Experience with manufacturing regulated and certified, safety critical components and software.Experience with Systems Safety Analysis, failure modes and effects analysis; fault tree analysis; common cause analysis, and single & multiple failure analysis.Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union: This is a union-represented position.Pay and Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range:Principal (Level 5): $182,000 - $247,000Additional Information:All information provided will be checked and may be verified.Applications for this position will be accepted until Mar. 19, 2026Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required.
“U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.Export Control Details: US based job, US Person requiredEducation Bachelor's Degree or Equivalent RequiredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range:Principal (Level 5): $182,000 - $247,000Additional Information:All information provided will be checked and may be verified.Applications for this position will be accepted until Mar. 19, 2026Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required.
“U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.Export Control Details: US based job, US Person requiredEducation Bachelor's Degree or Equivalent RequiredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Wire Assembler - Group B - 21203
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Wire Assembler to join our Electrical Assembly team in Everett, Washington.As a Wire Assembler, you will be a vital member of our team, dedicated to upholding the highest standards of safety and quality in our manufacturing processes.
In this position, you will cut and trim electrical wire, construct wire bundles that connect electrical systems, and assemble shelves and panels.
Your role will involve ensuring accurate and efficient assembly of components, while proactively identifying and addressing any discrepancies to maintain a seamless workflow.
You will collaborate with various teams to facilitate the movement of parts.
Additionally, you will prepare products for delivery, utilizing a range of tools and equipment to achieve precision in your work.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Identify discrepancies and promptly inform the appropriate work groups to ensure resolution.Make necessary adjustments to maintain proper machine operations and facilitate part movement within the organization.Coordinate, prepare, and package finished products for transportation to customers.Assist colleagues by answering questions and sharing information about work methods, processes, and procedures.Prepare kits of materials and components to support the manufacturing build process, revising drawings and incorporating changes as needed.Operate with or without wire forming boards, jigs, fixtures, or tooling to complete tasks.
Utilize information systems to track parts and manage work priority and sequencing.
Perform mechanical tasks such as sealing, soldering, encapsulation, and decal installation as required.Use electrical testing instruments, including ohmmeters and test lights, to conduct continuity checks and implement authorized changes.Drill, saw, file, sand, patch, and build up plastic parts and fixtures to meet required tolerances.Operate shop equipment, such as ovens, presses, and vacuum equipment, to finish and inspect parts.Create charts, records, and graphs as assigned, and apply protective materials and parting agents to molds, forms, and dies.Notify supervisors of equipment failures and malfunctions and make temporary molds and dams from various materials as needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Handle and work with various metals (e.g., aluminum, brass, steel, titanium) and plastics (e.g., acrylic, fiberglass, kevlar) for 6-8 hours daily.
Occasionally apply sealants, solvents, adhesives, cleaners, liquid coatings, and lubricants for 1-3 hours daily, ensuring proper use of materials such as epoxy, acetone, latex, and grease.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:Experience using tools and/or hand-held power tools.Experience in handling chemicals and hazardous materials (i.e., isopropyl alcohol and metals).Experience with electrical assembly installation.Ability to recognize colors.Proficiency in reading, writing, and speaking English.Ability to lift 35 pounds.Preferred Qualifications:Experience as an Electrician or Apprentice.Completion of an electrical trade school program or have military related electrical experience.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for 2nd shift.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $23.32/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Jun.
30, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 2nd shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Wire Assembler to join our Electrical Assembly team in Everett, Washington.As a Wire Assembler, you will be a vital member of our team, dedicated to upholding the highest standards of safety and quality in our manufacturing processes.
In this position, you will cut and trim electrical wire, construct wire bundles that connect electrical systems, and assemble shelves and panels.
Your role will involve ensuring accurate and efficient assembly of components, while proactively identifying and addressing any discrepancies to maintain a seamless workflow.
You will collaborate with various teams to facilitate the movement of parts.
Additionally, you will prepare products for delivery, utilizing a range of tools and equipment to achieve precision in your work.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Identify discrepancies and promptly inform the appropriate work groups to ensure resolution.Make necessary adjustments to maintain proper machine operations and facilitate part movement within the organization.Coordinate, prepare, and package finished products for transportation to customers.Assist colleagues by answering questions and sharing information about work methods, processes, and procedures.Prepare kits of materials and components to support the manufacturing build process, revising drawings and incorporating changes as needed.Operate with or without wire forming boards, jigs, fixtures, or tooling to complete tasks.
Utilize information systems to track parts and manage work priority and sequencing.
Perform mechanical tasks such as sealing, soldering, encapsulation, and decal installation as required.Use electrical testing instruments, including ohmmeters and test lights, to conduct continuity checks and implement authorized changes.Drill, saw, file, sand, patch, and build up plastic parts and fixtures to meet required tolerances.Operate shop equipment, such as ovens, presses, and vacuum equipment, to finish and inspect parts.Create charts, records, and graphs as assigned, and apply protective materials and parting agents to molds, forms, and dies.Notify supervisors of equipment failures and malfunctions and make temporary molds and dams from various materials as needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Handle and work with various metals (e.g., aluminum, brass, steel, titanium) and plastics (e.g., acrylic, fiberglass, kevlar) for 6-8 hours daily.
Occasionally apply sealants, solvents, adhesives, cleaners, liquid coatings, and lubricants for 1-3 hours daily, ensuring proper use of materials such as epoxy, acetone, latex, and grease.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:Experience using tools and/or hand-held power tools.Experience in handling chemicals and hazardous materials (i.e., isopropyl alcohol and metals).Experience with electrical assembly installation.Ability to recognize colors.Proficiency in reading, writing, and speaking English.Ability to lift 35 pounds.Preferred Qualifications:Experience as an Electrician or Apprentice.Completion of an electrical trade school program or have military related electrical experience.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for 2nd shift.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $23.32/hour, with potential to earn up to $51.82/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Jun.
30, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 2nd shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Machine Repair Mechanic - 89509
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Machine Repair Mechanic to join our Equipment Services team in various locations across Washington State.As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount.
You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment.
Your commitment to safety will be reflected in your adherence to SHEA regulations and best practices while guiding and mentoring team members.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.Conduct preventative maintenance inspections on stationary generator sets and other equipment.Ensure compliance with SHEA regulations while performing all tasks.Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.Utilize schematics, blueprints, specifications, manuals, and applicable procedures to complete work assignments effectively.Develop assembly methods when procedures are not available, documenting these methods for future reference.Hand scrape, flake, lap, level, and align equipment components as needed.Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.Perform operational tests on machine tools and building equipment to ensure functionality.Maintain logs, charts, and records, preparing reports and schedules as required.Conduct preventive and predictive maintenance inspections to ensure equipment reliability.Collaborate with other crafts to accomplish tasks and assist as needed.Perform incidental rigging to facilitate work tasks.Carry out work in other classifications when necessary to complete assignments.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Basic Qualifications:3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.Preferred Qualifications:Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.Ability to work around electromagnetic fields because of various types of production equipment.Conflict of Interest:Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shifts.
Working in other shifts and/or overtime varies based on business needs.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $46.00/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Jul.
03, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Machine Repair Mechanic to join our Equipment Services team in various locations across Washington State.As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount.
You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment.
Your commitment to safety will be reflected in your adherence to SHEA regulations and best practices while guiding and mentoring team members.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers.Conduct preventative maintenance inspections on stationary generator sets and other equipment.Ensure compliance with SHEA regulations while performing all tasks.Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment.Utilize schematics, blueprints, specifications, manuals, and applicable procedures to complete work assignments effectively.Develop assembly methods when procedures are not available, documenting these methods for future reference.Hand scrape, flake, lap, level, and align equipment components as needed.Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems.Perform operational tests on machine tools and building equipment to ensure functionality.Maintain logs, charts, and records, preparing reports and schedules as required.Conduct preventive and predictive maintenance inspections to ensure equipment reliability.Collaborate with other crafts to accomplish tasks and assist as needed.Perform incidental rigging to facilitate work tasks.Carry out work in other classifications when necessary to complete assignments.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Basic Qualifications:3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment).Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training.Preferred Qualifications:Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment.Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.Ability to work around electromagnetic fields because of various types of production equipment.Conflict of Interest:Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shifts.
Working in other shifts and/or overtime varies based on business needs.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $46.00/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Jul.
03, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Maintenance Plumber-81109
✦ New 🏢 Boeing
$64,974
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing's Global Real Estate and Facilities (GREF) organization is seeking a Maintenance Plumber to join our team in Everett, Washington. You will be supporting building & ground maintenance and initial installations.
Our team supports a 24/7 operation, based on business needs.This role allows you to obtain a variety of skillsets, the opportunity to learn from knowledgeable colleagues, and to work on critical maintenance plumbing solutions for major Boeing sites.
You will receive both on-the-job & formal training to enhance your technical skills, and backflow licensing is provided by the company.
Incentives include additional pay for obtaining trade licenses paid by the company as well as receiving shift differential pay for second and third shift.
This position is also eligible for overtime hours and pay.Position Responsibilities:Perform routine diagnosing, testing, and repairing of all types of plumbing lines and fixturesRepair, construct, install, rebuild, adjust, and modify plumbing lines and fixturesLayout, construct, maintain, diagnose, repair, adjust, modify, rebuild and test plant facilities plumbing, such as air, gas, and water, and drain line, sprinkler systems; gasoline pumps and related systems; high and low pressure steam equipment; liquid, air and vacuum pumps and accessories; pneumatic controls; various regulating and other valves; oxygen, hydrogen and hydraulic systems; boiler and furnace burners, baffles, pilot lights, governors, floats, strainers and oil pumpsPerform work described in other maintenance classifications when incidental but necessary to the accomplishment of the assignmentThis position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Basic Qualifications1+ years of experience in the plumbing or pipefitting tradeAbility to perform work at heights up to 125 feet about ground level with appropriate safety gear and pass fall protection trainingWillingness to work any shift as requiredPreferred Qualifications:1+ years of experience working with any of the following: backflow prevention, chemical process tank lines, or high-pressure steam systems1+ years of experience working in an industrial/manufacturing environmentPossess related plumbing certification (e.g., backflow, fitter) Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for all shiftsTotal Rewards & Pay TransparencyAt Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $33.32 per hour – $61.01 per hourApplications for this position will be accepted until Mar.
27, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing's Global Real Estate and Facilities (GREF) organization is seeking a Maintenance Plumber to join our team in Everett, Washington. You will be supporting building & ground maintenance and initial installations.
Our team supports a 24/7 operation, based on business needs.This role allows you to obtain a variety of skillsets, the opportunity to learn from knowledgeable colleagues, and to work on critical maintenance plumbing solutions for major Boeing sites.
You will receive both on-the-job & formal training to enhance your technical skills, and backflow licensing is provided by the company.
Incentives include additional pay for obtaining trade licenses paid by the company as well as receiving shift differential pay for second and third shift.
This position is also eligible for overtime hours and pay.Position Responsibilities:Perform routine diagnosing, testing, and repairing of all types of plumbing lines and fixturesRepair, construct, install, rebuild, adjust, and modify plumbing lines and fixturesLayout, construct, maintain, diagnose, repair, adjust, modify, rebuild and test plant facilities plumbing, such as air, gas, and water, and drain line, sprinkler systems; gasoline pumps and related systems; high and low pressure steam equipment; liquid, air and vacuum pumps and accessories; pneumatic controls; various regulating and other valves; oxygen, hydrogen and hydraulic systems; boiler and furnace burners, baffles, pilot lights, governors, floats, strainers and oil pumpsPerform work described in other maintenance classifications when incidental but necessary to the accomplishment of the assignmentThis position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Basic Qualifications1+ years of experience in the plumbing or pipefitting tradeAbility to perform work at heights up to 125 feet about ground level with appropriate safety gear and pass fall protection trainingWillingness to work any shift as requiredPreferred Qualifications:1+ years of experience working with any of the following: backflow prevention, chemical process tank lines, or high-pressure steam systems1+ years of experience working in an industrial/manufacturing environmentPossess related plumbing certification (e.g., backflow, fitter) Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for all shiftsTotal Rewards & Pay TransparencyAt Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $33.32 per hour – $61.01 per hourApplications for this position will be accepted until Mar.
27, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Electrical Systems - Assembler Installer - 30104
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team.
In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements.
Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position ResponsibilitiesAssemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.Conduct continuity checks to ensure proper functionality of electrical systems.Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling.
Typically assigned work that has been previously sequenced.Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.Perform hand forming of electrical wiring and soldering as required to complete work assignments.Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.Execute necessary riveting tasks as part of the assembly process.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications1+ years of experience in electrical assembly installation.1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).1+ years of experience handling chemicals and/or hazardous materials.Ability to recognize colors.Ability to work in confined spaces.Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.Proficiency in reading, writing, and speaking English.Preferred Qualifications:1+ years of experience as an Electrician or Apprentice.Completion of an electrical trade school program or have military related electrical experience.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Jul.
09, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team.
In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements.
Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position ResponsibilitiesAssemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.Conduct continuity checks to ensure proper functionality of electrical systems.Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling.
Typically assigned work that has been previously sequenced.Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.Perform hand forming of electrical wiring and soldering as required to complete work assignments.Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.Execute necessary riveting tasks as part of the assembly process.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications1+ years of experience in electrical assembly installation.1+ years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).1+ years of experience handling chemicals and/or hazardous materials.Ability to recognize colors.Ability to work in confined spaces.Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.Proficiency in reading, writing, and speaking English.Preferred Qualifications:1+ years of experience as an Electrician or Apprentice.Completion of an electrical trade school program or have military related electrical experience.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Jul.
09, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Manufacturing Engineer - Electrical/Electronics (Associate or Mid-Level)
✦ New 🏢 Boeing
$90,950
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is hiring Associate and Mid-Level Manufacturing Engineers to support our production teams in Everett, WA.
Successful candidates will have the ability to learn in a fast-paced environment, and the ability to collaborate with both the engineering teams and mechanics on the factory floor. Primary Responsibilities:Assists in the development and implementation of production and tooling methodologies.Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions.Works with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build.Assists in implementing manufacturing plans.Resolves technical problems and assists in the implementation of new engineering principles, theories, advanced technologies and concepts.Assists in the implementation of Lean principles and technologies.Interfaces with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience.This position is a Production Engineering role and requires direct interfacing with the people, parts, and equipment on the production floor.
A typical day could include: Spending up to 8 hours on feet standing/walking on the production floorClimbing ladders or stairs to access equipment or airplane sectionsWorking at heights or in tight spacesWearing required PPEBasic Qualifications (Required Skills/ Experience):Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statementExperience working in an engineering discipline.Experience working in a manufacturing/ production environment.2 or more years related work experience or an equivalent combination of education and experience.
(Associate Level)Preferred Qualifications (Desired Skills/Experience):5 or more years related work experience or an equivalent combination of education and experience.
(Mid-Level)Experience in Electrical and Electronics EngineeringConflict of Interest:Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation:This is a union-represented position.In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement.
Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.Pay and Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Associate level (Level 2): $90,950
- $123,050Summary pay range for Mid-level (Level 3): $111,350
- $150,650Applications for this position will be accepted until Mar.
19, 2026Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a “U.S.
Person” as defined by 22 C.F.R.
§120.62 is required.
“U.S.
Person” includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.Export Control Details: US based job, US Person requiredEducation Bachelor's Degree or Equivalent RequiredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is hiring Associate and Mid-Level Manufacturing Engineers to support our production teams in Everett, WA.
Successful candidates will have the ability to learn in a fast-paced environment, and the ability to collaborate with both the engineering teams and mechanics on the factory floor. Primary Responsibilities:Assists in the development and implementation of production and tooling methodologies.Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions.Works with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build.Assists in implementing manufacturing plans.Resolves technical problems and assists in the implementation of new engineering principles, theories, advanced technologies and concepts.Assists in the implementation of Lean principles and technologies.Interfaces with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience.This position is a Production Engineering role and requires direct interfacing with the people, parts, and equipment on the production floor.
A typical day could include: Spending up to 8 hours on feet standing/walking on the production floorClimbing ladders or stairs to access equipment or airplane sectionsWorking at heights or in tight spacesWearing required PPEBasic Qualifications (Required Skills/ Experience):Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statementExperience working in an engineering discipline.Experience working in a manufacturing/ production environment.2 or more years related work experience or an equivalent combination of education and experience.
(Associate Level)Preferred Qualifications (Desired Skills/Experience):5 or more years related work experience or an equivalent combination of education and experience.
(Mid-Level)Experience in Electrical and Electronics EngineeringConflict of Interest:Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation:This is a union-represented position.In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement.
Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required.Pay and Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Associate level (Level 2): $90,950
- $123,050Summary pay range for Mid-level (Level 3): $111,350
- $150,650Applications for this position will be accepted until Mar.
19, 2026Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a “U.S.
Person” as defined by 22 C.F.R.
§120.62 is required.
“U.S.
Person” includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.Export Control Details: US based job, US Person requiredEducation Bachelor's Degree or Equivalent RequiredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Power Plant Operator A-P110A-035
✦ New 🏢 Boeing
$118,794
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Power Plant Operators A, to join our team in Everett, Washington.As a Power Plant Operator A, you will be a vital part of our manufacturing team, responsible for safely and efficiently operating and maintaining power generation systems.
This includes monitoring equipment, performing routine inspections, troubleshooting issues, and ensuring compliance with safety protocols.You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.Position ResponsibilitiesOperate boilers, and may operate engines and boiler associated auxiliary equipment.Read gauges, meters, and charts to track boiler operations.Monitor boiler water, chemical, and fuel levels.Activate valves to change the amount of water, air, and fuel in boilers.Fire coal furnaces or feed boilers, using gas feeds or oil pumps.Inspect and maintain equipment to ensure that it is operating efficiently.Check safety devices and perform environmental checks routinely.Record data and keep logs of operation, maintenance, and safety activity.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Basic QualificationsCity of Seattle Steam Engineer's License Grade 2.3+ Year Experience of boiler operation and maintenance experience.This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shiftPreferred Qualifications:Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.Ability to work in noisy environments while completing tasks.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Union of Operating Engineers (IUOE-7286) agreement.Shift Work Statement:This position is for 4th shiftTotal Rewards & Pay TransparencyAt Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $60.92 per hour – $60.92 per hourApplications for this position will be accepted until Apr.
03, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Power Plant Operators A, to join our team in Everett, Washington.As a Power Plant Operator A, you will be a vital part of our manufacturing team, responsible for safely and efficiently operating and maintaining power generation systems.
This includes monitoring equipment, performing routine inspections, troubleshooting issues, and ensuring compliance with safety protocols.You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.Position ResponsibilitiesOperate boilers, and may operate engines and boiler associated auxiliary equipment.Read gauges, meters, and charts to track boiler operations.Monitor boiler water, chemical, and fuel levels.Activate valves to change the amount of water, air, and fuel in boilers.Fire coal furnaces or feed boilers, using gas feeds or oil pumps.Inspect and maintain equipment to ensure that it is operating efficiently.Check safety devices and perform environmental checks routinely.Record data and keep logs of operation, maintenance, and safety activity.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Basic QualificationsCity of Seattle Steam Engineer's License Grade 2.3+ Year Experience of boiler operation and maintenance experience.This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shiftPreferred Qualifications:Must be able to stand, twist, bend, kneel and occasional crawling within an 8 hour shift.Ability to work in noisy environments while completing tasks.Typical Education & Experience:High school graduate or GED preferred.Relocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Union of Operating Engineers (IUOE-7286) agreement.Shift Work Statement:This position is for 4th shiftTotal Rewards & Pay TransparencyAt Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $60.92 per hour – $60.92 per hourApplications for this position will be accepted until Apr.
03, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Silk Screener Decorative Panels B - 79805
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Silk Screener Decorative Panels B to join our Joint and Installation team in Everett Washington.Join our innovative team as a Silk Screener for Decorative Panels.
In this dynamic position, you will set up and execute multicolor silk screen printing operations, ensuring precise alignment and registration to create stunning instrument panels.
Your expertise in mixing and matching paints will guarantee that each print meets our high standards for color consistency and clarity.
Collaborating closely with various departments, you will coordinate the distribution of decals and maintain an organized inventory, all while adhering to safety regulations for hazardous materials.
If you are passionate about combining creativity with technical skill in a fast-paced environment, we invite you to be a part of our mission to deliver exceptional decorative solutions.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Set up and perform multicolor decorative silk screen printing operations according to established procedures.Align and adjust the silk screen to achieve proper contact and registration, applying paint using the squeegee method.Layout, locate, and apply lettering on various instrument panels using silk screening and related processes.Liaise with the Decal Area and other departments to coordinate changes, distribution of decals, and maintain perpetual inventory.Work from blueprints, specifications, and verbal instructions to complete assignments accurately.Clean silk screens and maintain tools and equipment to ensure quality printing.Mix and match paint to established color samples, ensuring consistency and accuracy.Obtain work orders and necessary materials, including inks and substrates, while adhering to safety data sheet guidelines.Perform hand setup for contact printing, including loading silk screens and applying ink to substrates.Operate the silk screen machine, managing the printing process for multiple colors and ensuring quality control.Check ink color using a color spectrometer and make adjustments as needed to match specifications.Perform rework and touch-ups on decorative interior parts using appropriate tools and techniques.Handle and dispose of hazardous materials in compliance with safety regulations.Maintain records of work performed and refile work packets in the ink room filing cabinet.Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:1+ years of experience silk screen printing.Experience mixing and color matching water based inks.Experience handling and disposing of hazardous materials per government regulations.Ability to recognize colors.Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times. Preferred Qualifications:Perform ink formulation (e.g.
measure ink by weight, machine mix ink, apply ink to test specimen, dry in oven).Experience working with overhead crane.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program Typical Education & Experience:High school graduate or GED preferred.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $25.00 – $49.92 per hourApplications for this position will be accepted until May.
29, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Silk Screener Decorative Panels B to join our Joint and Installation team in Everett Washington.Join our innovative team as a Silk Screener for Decorative Panels.
In this dynamic position, you will set up and execute multicolor silk screen printing operations, ensuring precise alignment and registration to create stunning instrument panels.
Your expertise in mixing and matching paints will guarantee that each print meets our high standards for color consistency and clarity.
Collaborating closely with various departments, you will coordinate the distribution of decals and maintain an organized inventory, all while adhering to safety regulations for hazardous materials.
If you are passionate about combining creativity with technical skill in a fast-paced environment, we invite you to be a part of our mission to deliver exceptional decorative solutions.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Set up and perform multicolor decorative silk screen printing operations according to established procedures.Align and adjust the silk screen to achieve proper contact and registration, applying paint using the squeegee method.Layout, locate, and apply lettering on various instrument panels using silk screening and related processes.Liaise with the Decal Area and other departments to coordinate changes, distribution of decals, and maintain perpetual inventory.Work from blueprints, specifications, and verbal instructions to complete assignments accurately.Clean silk screens and maintain tools and equipment to ensure quality printing.Mix and match paint to established color samples, ensuring consistency and accuracy.Obtain work orders and necessary materials, including inks and substrates, while adhering to safety data sheet guidelines.Perform hand setup for contact printing, including loading silk screens and applying ink to substrates.Operate the silk screen machine, managing the printing process for multiple colors and ensuring quality control.Check ink color using a color spectrometer and make adjustments as needed to match specifications.Perform rework and touch-ups on decorative interior parts using appropriate tools and techniques.Handle and dispose of hazardous materials in compliance with safety regulations.Maintain records of work performed and refile work packets in the ink room filing cabinet.Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeCurrent Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Basic Qualifications:1+ years of experience silk screen printing.Experience mixing and color matching water based inks.Experience handling and disposing of hazardous materials per government regulations.Ability to recognize colors.Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times. Preferred Qualifications:Perform ink formulation (e.g.
measure ink by weight, machine mix ink, apply ink to test specimen, dry in oven).Experience working with overhead crane.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program Typical Education & Experience:High school graduate or GED preferred.Drug Free WorkplaceBoeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $25.00 – $49.92 per hourApplications for this position will be accepted until May.
29, 2026Language Requirements English PreferredRelocation Relocation assistance is not a negotiable benefit for this position.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Aviation Maintenance Technician - 97110
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Technician to join our Field team in Everett, Washington.As an Aviation Maintenance Technician, you will be essential in maintaining the highest standards of quality and safety in aircraft operations. Your role will involve performing a wide range of maintenance tasks on aircraft structures and systems, where your attention to detail and adherence to safety protocols are critical. A Color Vision Certification may be necessary for portions of this job. You will troubleshoot and inspect aircraft to ensure they are flight-ready, diligently documenting all maintenance activities to comply with industry regulations. Your technical expertise will enable you to execute repairs and modifications effectively, ensuring that all work meets stringent specifications.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Perform production installations, maintenance, preventative maintenance, and alterations on aircraft structures, systems, and sub-systems, including electrical and avionics, for both standard and experimental certificated aircraft.Troubleshoot, inspect, test, repair, and service aircraft and engine systems to ensure they are flight-ready, documenting any nonconforming materials or components according to established specifications and procedures.Conduct audits and surveillance of manufacturing and quality assurance processes, including customer/FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections.Utilize technical specifications, sketches, manuals, and FAA publications to effectively complete work assignments.Maintain company and FAA-required records and inspection forms while ensuring a safe, clean, and organized work environment.Plan and organize work packages to promote safe and efficient operations, meeting predetermined schedules.Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks.Interpret and adhere to airworthiness directives, service bulletins, and other approved data.Apply mathematical calculations to set up and use precision measuring tools for accurate measurements.Create production aids as needed to facilitate work assignments.Maintain necessary certifications, licenses, and permits for assigned work.Exchange information with suppliers, customers, or company representatives to explain or demonstrate operations and tests.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights up to 35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.
Failure to complete the assessment will remove you from consideration.Basic Qualifications:3+ years of experience with aircraft maintenance on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience) OR with troubleshooting electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction).Must be willing to work any shift, including days, evenings, nights, and weekends.Preferred Qualifications:FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified.5+ of aircraft maintenance experience on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience)Conflict of Interest:Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.Safety Sensitive Statement:This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Apr. 06, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Failure to complete the assessment will remove you from consideration.Basic Qualifications:3+ years of experience with aircraft maintenance on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience) OR with troubleshooting electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction).Must be willing to work any shift, including days, evenings, nights, and weekends.Preferred Qualifications:FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified.5+ of aircraft maintenance experience on powered aircraft with military, airline or certificated repair station background (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience)Conflict of Interest:Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.Safety Sensitive Statement:This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Apr. 06, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Integral Fuel Cell Assembly (In- Tank Mechanic) - 31606
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks.
This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements.
You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank.
Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications.
Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. Use precision measuring instruments to verify that quality standards are achieved. Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/Experience): 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.1+ years of experience using high impact vibratory tools; such as bucking/riveting. Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.Ability to lift up to 35lbs.Ability to work in Confined Spaces (work within or pass through).
Entry diameter 9.5”X17.7”.Proficiency in reading, writing, and speaking English.
Preferred Qualifications: 1+ years of experience performing aircraft structural work or equivalate.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift: This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Apr.
10, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks.
This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements.
You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank.
Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications.
Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. Use precision measuring instruments to verify that quality standards are achieved. Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications (Required Skills/Experience): 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.1+ years of experience using high impact vibratory tools; such as bucking/riveting. Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.Ability to lift up to 35lbs.Ability to work in Confined Spaces (work within or pass through).
Entry diameter 9.5”X17.7”.Proficiency in reading, writing, and speaking English.
Preferred Qualifications: 1+ years of experience performing aircraft structural work or equivalate.Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift: This position is for a variety of shifts. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Apr.
10, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Senior Software Certification Engineer
✦ New 🏢 Boeing
$136,850
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing is seeking an experienced and dedicated Software Certification Engineer to lead our engineering team in the critical mission of developing and certifying safe, reliable, and innovative aircraft.
This role is paramount in ensuring that our aircraft not only meet but exceed the rigorous safety standards set forth by the Federal Aviation Administration (FAA).
The Software Certification Engineer will play a vital role in fostering a culture of safety and excellence, making significant contributions to the certification process that underpins the trust of our customers and the flying public.Why This Role is Important:The Software Certification Engineer is a cornerstone of Boeing's unwavering commitment to safety and excellence in aviation.
This role is crucial in ensuring that our aircraft not only meet the regulatory standards set by the FAA but also embody the highest levels of safety and reliability.
By partnering closely with the FAA, the Software Certification Engineer will help shape the future of aviation, driving innovation while safeguarding the trust of our customers and the flying public.Join us in our mission to connect, protect, explore, and inspire the world through aerospace innovation.
Apply today to be part of a team that is dedicated to setting the standard for safety and excellence in the aerospace industry!Position Responsibilities:Lead and manage a team of engineers focused on the design, analysis, and testing of aircraft systems and components, with an unwavering commitment to safety.Cultivate a safety-first mindset within the engineering unit, ensuring that all engineering practices prioritize the well-being of passengers and crew.Collaborate closely with the FAA to navigate the complex certification process, ensuring that all aircraft designs comply with stringent regulatory requirements and safety standards.Develop and implement engineering strategies that emphasize safety and reliability, aligning with Boeing’s commitment to delivering the highest quality aircraft.Serve as the primary liaison for FAA representatives, facilitating transparent communication and collaboration throughout the certification journey.Oversee the preparation and submission of comprehensive technical documentation required for FAA certification, ensuring that all materials reflect the highest standards of accuracy and thoroughness.Mentor and develop engineering staff, instilling a deep understanding of safety protocols and certification processes to enhance their professional growth and technical expertise.Analyze and resolve complex engineering challenges with a focus on safety, leveraging data-driven decision-making and industry best practices.Monitor project progress and performance, ensuring that engineering solutions are delivered on time and meet all safety and certification milestones.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet export control compliance requirements.
To meet export control compliance requirements, a “U.S.
Person” as defined by 22 C.F.R.
§120.15 is required. “U.S.
Person” includes U.S.
Citizen, lawful permanent resident, refugee, or asylee. Basic Qualifications (Required Skills/Experience):Bachelor's Degree5+ years of experience as a Designated Engineering Representative (DER) or Technical Standard Order (TSO) Certification Specialist.9+ years of experience in RTCA DO-178(B/C) Software Considerations in Airborne Systems and Equipment Certification5+ years’ experience in software engineeringPreferred Qualifications (Desired Skills/Experience):Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science12+ years related work experience or an equivalent combination of education and experienceCurrent Designated Engineering Representative (DER) or Technical Standard Order (TSO) Certification SpecialistExperience with concurrent software and distributed systems12+ years’ experience in software development life cycles, configuration management and best agile software engineering practices9+ years’ experience developing, documenting and maintaining architectures, requirements, algorithms, interfaces and designs for software systems9+ years’ experience leading software development projectsLeads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systemsLeads development, selection, tailoring and deployment of processes, tools and metricsExperience using common software version control tools such as GitExperience with Agile planning tool such as JIRA, TSFDrug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union: This is a union-represented positionPay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range – Level 4 (Senior)
- $136,850
- $185,150Summary Pay Range – Level 5 (Lead)
- $167,450
- $226,550Applications for this position will be accepted until Mar.
24, 2026Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a “U.S.
Person” as defined by 22 C.F.R.
§120.62 is required.
“U.S.
Person” includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.Export Control Details: US based job, US Person requiredEducation Bachelor's Degree or Equivalent RequiredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing is seeking an experienced and dedicated Software Certification Engineer to lead our engineering team in the critical mission of developing and certifying safe, reliable, and innovative aircraft.
This role is paramount in ensuring that our aircraft not only meet but exceed the rigorous safety standards set forth by the Federal Aviation Administration (FAA).
The Software Certification Engineer will play a vital role in fostering a culture of safety and excellence, making significant contributions to the certification process that underpins the trust of our customers and the flying public.Why This Role is Important:The Software Certification Engineer is a cornerstone of Boeing's unwavering commitment to safety and excellence in aviation.
This role is crucial in ensuring that our aircraft not only meet the regulatory standards set by the FAA but also embody the highest levels of safety and reliability.
By partnering closely with the FAA, the Software Certification Engineer will help shape the future of aviation, driving innovation while safeguarding the trust of our customers and the flying public.Join us in our mission to connect, protect, explore, and inspire the world through aerospace innovation.
Apply today to be part of a team that is dedicated to setting the standard for safety and excellence in the aerospace industry!Position Responsibilities:Lead and manage a team of engineers focused on the design, analysis, and testing of aircraft systems and components, with an unwavering commitment to safety.Cultivate a safety-first mindset within the engineering unit, ensuring that all engineering practices prioritize the well-being of passengers and crew.Collaborate closely with the FAA to navigate the complex certification process, ensuring that all aircraft designs comply with stringent regulatory requirements and safety standards.Develop and implement engineering strategies that emphasize safety and reliability, aligning with Boeing’s commitment to delivering the highest quality aircraft.Serve as the primary liaison for FAA representatives, facilitating transparent communication and collaboration throughout the certification journey.Oversee the preparation and submission of comprehensive technical documentation required for FAA certification, ensuring that all materials reflect the highest standards of accuracy and thoroughness.Mentor and develop engineering staff, instilling a deep understanding of safety protocols and certification processes to enhance their professional growth and technical expertise.Analyze and resolve complex engineering challenges with a focus on safety, leveraging data-driven decision-making and industry best practices.Monitor project progress and performance, ensuring that engineering solutions are delivered on time and meet all safety and certification milestones.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet export control compliance requirements.
To meet export control compliance requirements, a “U.S.
Person” as defined by 22 C.F.R.
§120.15 is required. “U.S.
Person” includes U.S.
Citizen, lawful permanent resident, refugee, or asylee. Basic Qualifications (Required Skills/Experience):Bachelor's Degree5+ years of experience as a Designated Engineering Representative (DER) or Technical Standard Order (TSO) Certification Specialist.9+ years of experience in RTCA DO-178(B/C) Software Considerations in Airborne Systems and Equipment Certification5+ years’ experience in software engineeringPreferred Qualifications (Desired Skills/Experience):Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science12+ years related work experience or an equivalent combination of education and experienceCurrent Designated Engineering Representative (DER) or Technical Standard Order (TSO) Certification SpecialistExperience with concurrent software and distributed systems12+ years’ experience in software development life cycles, configuration management and best agile software engineering practices9+ years’ experience developing, documenting and maintaining architectures, requirements, algorithms, interfaces and designs for software systems9+ years’ experience leading software development projectsLeads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systemsLeads development, selection, tailoring and deployment of processes, tools and metricsExperience using common software version control tools such as GitExperience with Agile planning tool such as JIRA, TSFDrug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union: This is a union-represented positionPay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range – Level 4 (Senior)
- $136,850
- $185,150Summary Pay Range – Level 5 (Lead)
- $167,450
- $226,550Applications for this position will be accepted until Mar.
24, 2026Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a “U.S.
Person” as defined by 22 C.F.R.
§120.62 is required.
“U.S.
Person” includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.Export Control Details: US based job, US Person requiredEducation Bachelor's Degree or Equivalent RequiredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Painter Spray A -Major Assemblies 03905
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray A -Major Assemblies to join our Joint and Installation team in Everett and Renton, Washington.As a Painter Spray A
- Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft.
Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish.
You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements.
Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment.
Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.Prepare surfaces to ensure proper adhesion, including corrosion removal and paint stripping as needed.Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.Mask and unmask areas to facilitate corrosion removal or painting operations.Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.Operate automated spray equipment, such as robots, for preparation and painting tasks.Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.Monitor and maintain time-sensitive materials and processes throughout the painting operation.Support customer inspections as required and screen work instructions to ensure proper workflow.Apply decals, part markings, and wrap finished parts or assemblies as required.Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.
Failure to complete the assessment will remove you from consideration.Basic Qualifications:1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.1+ years of experience mixing paints.1+ years experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.1+ years of experience handling chemicals and/or hazardous materialsExperience working from heights & using fall protection equipment with weight limitations.Preferred Qualifications:1+ year of experience performing aircraft or autobody painting and finishing operations.Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Mar.
31, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray A -Major Assemblies to join our Joint and Installation team in Everett and Renton, Washington.As a Painter Spray A
- Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft.
Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish.
You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements.
Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment.
Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.Prepare surfaces to ensure proper adhesion, including corrosion removal and paint stripping as needed.Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.Mask and unmask areas to facilitate corrosion removal or painting operations.Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.Operate automated spray equipment, such as robots, for preparation and painting tasks.Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.Monitor and maintain time-sensitive materials and processes throughout the painting operation.Support customer inspections as required and screen work instructions to ensure proper workflow.Apply decals, part markings, and wrap finished parts or assemblies as required.Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asyleeResumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.
Failure to complete the assessment will remove you from consideration.Basic Qualifications:1+ years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.1+ years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.1+ years of experience mixing paints.1+ years experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.1+ years of experience handling chemicals and/or hazardous materialsExperience working from heights & using fall protection equipment with weight limitations.Preferred Qualifications:1+ year of experience performing aircraft or autobody painting and finishing operations.Completed 1+ year of autobody paint/collision repair in high school or community and technology college academic program.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This position is for a variety of shiftsTotal Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary pay range: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Mar.
31, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Aviation Maintenance Inspector - 97110
✦ New 🏢 Boeing
Salary not disclosed
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Inspector to join our Field team in Everett, Washington.As an Aviation Maintenance Inspector, you will be instrumental in upholding the highest standards of quality and safety within our aircraft maintenance operations. Your primary responsibility will be to conduct thorough inspections of aircraft structures, systems, and components, ensuring compliance with industry regulations and safety protocols. You will meticulously evaluate maintenance work, troubleshoot issues, and document any nonconforming materials or processes to maintain rigorous quality assurance. A Color Vision Certification may be necessary for portions of this job. Your expertise will be essential in performing airworthiness inspections and coordinating with regulatory bodies, ensuring that all aircraft are flight-ready and meet stringent specifications.You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.Position Responsibilities:Conduct audits and surveillance of all manufacturing and quality assurance processes, ensuring compliance with specifications, processes, and procedures.Perform quality functions, including customer and FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections (both pre-flight and post-flight).Initiate and document any nonconforming materials, hardware, software, tools, parts, or assemblies in accordance with established specifications and procedures.Utilize technical specifications, sketches, manuals, and FAA publications to effectively accomplish inspection assignments.Maintain all company and FAA-required records and inspection forms, ensuring accuracy and compliance.Uphold a safe, clean, and organized work environment while planning and organizing work packages to promote efficient operations and meet predetermined schedules.Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks.Interpret and adhere to airworthiness directives, service bulletins, and other approved data to ensure compliance.Apply mathematical calculations to set up and use precision measuring tools for accurate measurements of gaps, heights, angles, and hole dimensions.Create production aids as needed to facilitate inspection assignments.Maintain necessary certifications, licenses, and permits required for the role.Exchange information with suppliers, customers, and company representatives to explain or demonstrate operations, tests, or any difficulties encountered.Physical Demands and Potential Hazards:Perform physical tasks that include lifting weights up to 35 lbs.Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.Work in environments that may involve contact with metals, solvents, and coolants.Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.Adapt to varying noise levels and atmospheric conditions.Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.
Failure to complete the assessment will remove you from consideration.Basic Qualifications:5+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience).Must be willing to work any shift; including days, evenings, nights, and weekends.Preferred Qualifications:FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified.10+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience).Conflict of Interest:Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.Safety Sensitive Statement:This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Apr. 06, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Failure to complete the assessment will remove you from consideration.Basic Qualifications:5+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience).Must be willing to work any shift; including days, evenings, nights, and weekends.Preferred Qualifications:FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified.10+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience).Conflict of Interest:Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.Typical Education & Experience:High school graduate or GED preferred.Relocation:This position offers relocation based on candidate eligibility.Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Union Representation Statement:This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.Shift Work Statement:This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.Safety Sensitive Statement:This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.Total Rewards & Pay Transparency:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.Applications for this position will be accepted until Apr. 06, 2026Language Requirements English PreferredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for variable shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Senior System Engineer – Compliance
✦ New 🏢 Boeing
$129,700
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing's Safety, Security, & Airworthiness (SSA) organization is seeking a Senior Systems Engineer – Compliance/Certification to join their Regulatory Administration System Oversight Team in Everett, WA.The individual will have the opportunity to contribute to critical monitoring initiative and collaborate with industry – leading professional and regulatory agenciesPrimary responsibilities: Leads the identification, analysis, and assessment of regulatory and contractual compliance of aerospace systems, products and services.Collaborate with internal and external stakeholders to define airworthiness and regulatory compliance requirementsReviews complex regulatory and customer requirements and develop monitoring strategies.
(i.e.
Certification)Leads analysis of regulatory and certification technical data for completeness and alignment to applicable regulatory and contractual requirements.Develop the planning and implementation of monitoring strategies.Research, investigates and monitors compliance processes for achieving regulatory compliance and recommends and leads process improvements, risk and opportunitiesEngages with regulators on complex programs or initiatives to shape certification strategies, approaches, activities, and artifacts.Develops and reviews, complex compliance reports and documents in accordance with applicable requirements and regulations.Leads establishing and promoting global regulatory advocacy strategies, trainings, tools, and methods.This position is expected to be 100% onsite. The selected candidate will be required to work onsite in Everett, WA.Basic Qualifications (Required Skills and Experience):9+ years of related work experience or an equivalent combination of education and experienceBachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science8+ years of experience working across the certification value stream.Experience working in International Type Validation and/or Operational Certification4+ years of experience with certification processes to comply with 14 CFR 21.93, 21.95 and 21.97Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impactsExperience developing presentations and presenting to multiple levels of an organizationExperience investigating and finding solutions to complex technical or regulatory issuesStrong technical writing abilitiesExperience extracting and compiling data from multiple sourcesExperience with analytics tools including Tableau, SQL, R, and PythonPreferred Qualifications (Desired Skills and Experience):8+ years of experience identifying key stakeholder project specific requirements and scope, then building and managing project plans8+ years of experience in business intelligence/data analytics tools (Microsoft Power BI, Dashboards, SQL, Tableau, etc.)Experience with systems engineering and integration of complex systemsExperience with Risk ManagementExperience with audit activitiesExperience with Functional DecompositionFirsthand experience with airplane requirementsDrug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range: $129,700
- $174,80Applications for this position will be accepted until Mar.
25, 2026Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a “U.S.
Person” as defined by 22 C.F.R.
§120.62 is required.
“U.S.
Person” includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.Export Control Details: US based job, US Person requiredEducation Bachelor's Degree or Equivalent RequiredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.Boeing's Safety, Security, & Airworthiness (SSA) organization is seeking a Senior Systems Engineer – Compliance/Certification to join their Regulatory Administration System Oversight Team in Everett, WA.The individual will have the opportunity to contribute to critical monitoring initiative and collaborate with industry – leading professional and regulatory agenciesPrimary responsibilities: Leads the identification, analysis, and assessment of regulatory and contractual compliance of aerospace systems, products and services.Collaborate with internal and external stakeholders to define airworthiness and regulatory compliance requirementsReviews complex regulatory and customer requirements and develop monitoring strategies.
(i.e.
Certification)Leads analysis of regulatory and certification technical data for completeness and alignment to applicable regulatory and contractual requirements.Develop the planning and implementation of monitoring strategies.Research, investigates and monitors compliance processes for achieving regulatory compliance and recommends and leads process improvements, risk and opportunitiesEngages with regulators on complex programs or initiatives to shape certification strategies, approaches, activities, and artifacts.Develops and reviews, complex compliance reports and documents in accordance with applicable requirements and regulations.Leads establishing and promoting global regulatory advocacy strategies, trainings, tools, and methods.This position is expected to be 100% onsite. The selected candidate will be required to work onsite in Everett, WA.Basic Qualifications (Required Skills and Experience):9+ years of related work experience or an equivalent combination of education and experienceBachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science8+ years of experience working across the certification value stream.Experience working in International Type Validation and/or Operational Certification4+ years of experience with certification processes to comply with 14 CFR 21.93, 21.95 and 21.97Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impactsExperience developing presentations and presenting to multiple levels of an organizationExperience investigating and finding solutions to complex technical or regulatory issuesStrong technical writing abilitiesExperience extracting and compiling data from multiple sourcesExperience with analytics tools including Tableau, SQL, R, and PythonPreferred Qualifications (Desired Skills and Experience):8+ years of experience identifying key stakeholder project specific requirements and scope, then building and managing project plans8+ years of experience in business intelligence/data analytics tools (Microsoft Power BI, Dashboards, SQL, Tableau, etc.)Experience with systems engineering and integration of complex systemsExperience with Risk ManagementExperience with audit activitiesExperience with Functional DecompositionFirsthand experience with airplane requirementsDrug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range: $129,700
- $174,80Applications for this position will be accepted until Mar.
25, 2026Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a “U.S.
Person” as defined by 22 C.F.R.
§120.62 is required.
“U.S.
Person” includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.Export Control Details: US based job, US Person requiredEducation Bachelor's Degree or Equivalent RequiredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Mid-Level or Senior Safety & Airworthiness Support
✦ New 🏢 Boeing
$92,650
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.The Boeing Commercial Airplanes (BCA), Configuration Management/Data Quality & Distribution organization has an exciting opportunity for a Mid-Level (Level 3) or Senior (Level 4) Mid-Level or Senior Safety & Airworthiness Support to join our team in Everett, WA.Primary responsibilities: Analyzes data gathered from identified sources, identifies discrepancies and works with responsible organizations to resolve.Manages the change process.
Integrates and coordinates design and configuration data required for certifications and/or flight clearance notices.Collects, organizes, synthesizes and analyzes data to support and guide business decisions.
Summarizes findings.Performs configuration verification audits.Supports generation of product configuration data required for certifications and flight clearance notices.Supports the development of certification plans and deliverables for approval by regulatory representativesCollaborates with cert specialist across multiple functions to support cert activity. Supports the daily development of data packages, metrics, and deliverables in support of certify and delivering commercial aircraft.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at the listed location.Basic Qualifications (Required Skills and Experience):Associate’s degree or higherLevel 3: 3+ years of related work experience or an equivalent combination of education and experienceLevel 4: 6+ years of related work experience or an equivalent combination of education and experienceStrong cross‑functional integration experience (working with engineering, manufacturing, supply chain, quality, or customer support).Excellent communication and stakeholder engagement skills, including experience engaging with senior/executive leadership and conveying information clearly.Experience leading cross-disciplinary teams in large organizations.Proven ability to support projects and drive plans to closure.Preferred Qualifications (Desired Skills and Experience):Previous experience with regulatory compliance in aerospace or related industries.Familiarity with 14 CFR Part 25 requirements and experience interacting with regulators.Proven ability to lead projects and drive plans to closure.Desired tool familiarity: DCCS, ETAC, etc.Knowledge of baseline major/minor model and options documentation (e.g., configuration specification, customer detailed specifications, standard selections document).Knowledge of drawing/data systems (e.g., ""used on"" drawings, part relationships, product data management) and configuration management principles and processes (e.g., part number control, revision level, naming conventions, product identification numbering systems).Knowledge of responsibilities and tasks performed by various Engineering departments/disciplines (e.g., design, test, software, technology, avionics).
Knowledge of the interaction between departments/disciplines and how their products/processes affect one another and impact non-engineering processes (e.g., Operations, Logistics, Business).Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range:Mid-Level (Level 3): $92,650
- $125,350Senior (Level 4): $114,750
- $155,250Applications for this position will be accepted until Mar.
21, 2026Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a “U.S.
Person” as defined by 22 C.F.R.
§120.62 is required.
“U.S.
Person” includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.Export Control Details: US based job, US Person requiredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.The Boeing Commercial Airplanes (BCA), Configuration Management/Data Quality & Distribution organization has an exciting opportunity for a Mid-Level (Level 3) or Senior (Level 4) Mid-Level or Senior Safety & Airworthiness Support to join our team in Everett, WA.Primary responsibilities: Analyzes data gathered from identified sources, identifies discrepancies and works with responsible organizations to resolve.Manages the change process.
Integrates and coordinates design and configuration data required for certifications and/or flight clearance notices.Collects, organizes, synthesizes and analyzes data to support and guide business decisions.
Summarizes findings.Performs configuration verification audits.Supports generation of product configuration data required for certifications and flight clearance notices.Supports the development of certification plans and deliverables for approval by regulatory representativesCollaborates with cert specialist across multiple functions to support cert activity. Supports the daily development of data packages, metrics, and deliverables in support of certify and delivering commercial aircraft.This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at the listed location.Basic Qualifications (Required Skills and Experience):Associate’s degree or higherLevel 3: 3+ years of related work experience or an equivalent combination of education and experienceLevel 4: 6+ years of related work experience or an equivalent combination of education and experienceStrong cross‑functional integration experience (working with engineering, manufacturing, supply chain, quality, or customer support).Excellent communication and stakeholder engagement skills, including experience engaging with senior/executive leadership and conveying information clearly.Experience leading cross-disciplinary teams in large organizations.Proven ability to support projects and drive plans to closure.Preferred Qualifications (Desired Skills and Experience):Previous experience with regulatory compliance in aerospace or related industries.Familiarity with 14 CFR Part 25 requirements and experience interacting with regulators.Proven ability to lead projects and drive plans to closure.Desired tool familiarity: DCCS, ETAC, etc.Knowledge of baseline major/minor model and options documentation (e.g., configuration specification, customer detailed specifications, standard selections document).Knowledge of drawing/data systems (e.g., ""used on"" drawings, part relationships, product data management) and configuration management principles and processes (e.g., part number control, revision level, naming conventions, product identification numbering systems).Knowledge of responsibilities and tasks performed by various Engineering departments/disciplines (e.g., design, test, software, technology, avionics).
Knowledge of the interaction between departments/disciplines and how their products/processes affect one another and impact non-engineering processes (e.g., Operations, Logistics, Business).Drug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.Pay & Benefits:At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Pay is based upon candidate experience and qualifications, as well as market and business considerations.Summary Pay Range:Mid-Level (Level 3): $92,650
- $125,350Senior (Level 4): $114,750
- $155,250Applications for this position will be accepted until Mar.
21, 2026Export Control Requirements: This position must meet U.S.
export control compliance requirements.
To meet U.S.
export control compliance requirements, a “U.S.
Person” as defined by 22 C.F.R.
§120.62 is required.
“U.S.
Person” includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.Export Control Details: US based job, US Person requiredRelocation This position offers relocation based on candidate eligibility.Visa Sponsorship Employer will not sponsor applicants for employment visa status.Shift This position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
jobs by
