✓ Engineering ✕ Clear
Engineering Jobs in Austin Travis County Tx Remote
108 positions found
A
Engineer | ARRIVE Austin
✦ New
Salary not disclosed
ENGINEER | ARRIVE AUSTIN
POSITION PROFILE
We're looking for a seasoned Engineer that's savvy with preventative maintenance and ongoing repairs to ensure our hotel is safe and comfortable for guests and our team!
ABOUT ARRIVE AUSTIN
Located in the heart of East Austin, ARRIVE Austin is the perfect neighborhood hotel for guests looking for a blend of modern luxury, local authenticity, and friendly hospitality. With meticulously designed rooms and three distinct dining outlets, ARRIVE Austin welcomes travelers and locals alike. If you’re passionate about creating genuine connections, thrive in a dynamic hospitality environment, and find joy in elevating guest experiences, we invite you to join our team at ARRIVE Austin!
THE TASK AT HAND:
- Conducting ongoing room inspections to identify repair needs
- Installing or repairing sheet rock and other wall coverings
- Painting and painting touch-ups as needed throughout the property
- Installing and repairing basic electrical fixtures, from replacing light switches to swapping lightbulbs
- Repairing fixtures and furniture
- Installing, replacing, and programing televisions
- Performing minor plumbing functions
- Replacing and repairing heating and cooling pumps as well as preventative maintenance on HVAC units
- Tracing and repairing all types of water lines
- Troubleshooting and repairing kitchen equipment
- Maintaining repair and preventive maintenance records while following service recovery guidelines
- Adhering to work to local, state and Federal codes while performing all building maintenance needs.
- Supporting the operations team and completing some House Person functions in the event of staffing shortages or busy periods.
- Practicing safe work habits by wearing protective safety equipment and complying with MSDS and OSHA standards
- Helping to ensure overall guest satisfaction
- Working a flexible schedule based on hotel occupancy or emergency repair needs
WHAT WE'RE LOOKING FOR:
- A positive, upbeat attitude and a passion for building maintenance
- A collaborative team member that’s happy to pitch in, support coworkers, and try things differently if the situation calls for a quick pivot.
- A good communicator
- Top-notch organization skills and the ability to prioritize projects
- The ability to safely work throughout a shift. Tasks may include walking, standing, bending, and lifting supplies up to 50lbs.
- Comfort in a fast-paced environment
- 5+ years of experience in general repair and building maintenance
- Professional skilled trade licensing in plumbing & electrical preferred, but not required
- A flexible work schedule as weekend and holiday shifts may be required from time to time
- Requires mobility and prolonged standing, walking, bending and lifting up to 50 lbs
- Extensive knowledge of AC systems & refrigeration
WHAT'S IN IT FOR YOU:
- A competitive compensation package including medical, dental, vision, and life insurance.
- 401(k) retirement plan (future you will love this one!)
- Paid time off, holiday pay, and sick pay when you’re under the weather.
- Career advancement in an organization committed to helping star employees thrive.
- There’s also an opportunity to expand your career trajectory as we are a fast-growing company with hotels and restaurants in multiple cities.
- Professional development that sets you up for success across multiple hospitality career paths.
- A collaborative work environment where your creative ideas can come to fruition.
- Amazing employee discounts on hotels and dining across our entire portfolio (18 hotels and more to come!)
- Hands-on training with a nimble team.
Palisociety is an Equal Opportunity Employer committed to hiring a diverse workforce and sustaining an inclusive culture. Palisociety does not discriminate on the basis of disability, veteran status or any other basis protected under federal, state, or local laws.
For more information, visit or follow @palisociety
For more information, visit or follow @lepetitpali
For more information, visit or follow @arrivehotels
We are an E-Verify Employer/Somos un empleador de E-Verify.
REQUIREMENTS
- 5+ years’ experience working in general repair and maintenance
- Professional skilled trade licensing in plumbing & electrical preferred, but not required
- Must be able to work a flexible schedule and shifts – weekends & holidays as needed by the department
MORE ABOUT US:
Palisociety is a fully integrated hospitality company that develops and operates unique hotels and residences across the country. In addition to our independent collection of hotels, we also operate Palihouses, Palihotels, and ARRIVE by Palisociety. We strive to delight and inspire our guests and local community by creating one-of-a-kind neighborhood-centric places filled with interesting people, friendly staff, and trusty service.
We’re a family business founded in Los Angeles by CEO Avi Brosh in 1998. As we continue to grow and develop new hotels and restaurants, we’re always looking for spirited, hardworking, passionate people that can join our team and grow with us!
Field Service Engineer 2 Childress, Texas
✦ New 🏢 Dell
$72,000
Job Posting Field Services Engineer 2
At Dell Technologies, we take pride in providing our customers with a quality of service that more than matches the quality of our products. Our Field Service team is integral to making sure the service to our customers is seamless, responsive and focused. Taking our technical skills to customer sites, we’re responsible for everything from installation, configuration and integration, through to maintenance, troubleshooting and repair. Customers see us as a trusted liaison who can understand their precise needs on a host of admin and technical matters. We also work closely with our designers, solution managers and sales specialists to provide solutions.
Join us to do the best work of your career and make a profound social impact as a Field Service Engineer 2 on our Field Service Team in Childress, Texas.
What you’ll achieve
As a Field Service Engineer , you will collaborate with peers, apply technical expertise, diagnosis tools and analytical practices to resolve customer issues, taking care of our customers by delivering outstanding on-site support and creating a great customer experience.
You will:
Triage issues with direction from Dell support
Execute plan of action from Dell Domain Engineer/L3 - (communicate using Teams, Email, and Phone)
Document POA results, logs and service report (parts numbers/PPID of old/new parts replaced) to Dell via case email
Reseating parts, swap or replace parts, upgrading firmware as needed
Sever testing and validation (running diagnostics, capturing & uploading logs)
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements:
5+ years of professional experience, plus either an Associate's Degree in a technical discipline OR an equivalent combination of professional experience and education
Experience delivering technical Field Services supporting hardware and software at client sites
Experience in a customer facing role, including successfully reporting and presenting to all levels of the organization
Experience working in locations where client has a large, concentrated deployment of assets and experience with networking and Fiber
Must be able to lift a minimum of 50 lbs waist high to replace components on the server stacks
Desirable Requirements:
Dell EMC Proven Professional Specialist Level certification (1 or more: CPSD (Converged, Hyper Converged) and Server (PowerEdge)
Industry certifications CompTIA Certifications: Tech+, A+, Security+, Network+, etc. and Networking certifications CCNA or equivalent
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for this position is $72,000 - $93,500.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R286544
At Dell Technologies, we take pride in providing our customers with a quality of service that more than matches the quality of our products. Our Field Service team is integral to making sure the service to our customers is seamless, responsive and focused. Taking our technical skills to customer sites, we’re responsible for everything from installation, configuration and integration, through to maintenance, troubleshooting and repair. Customers see us as a trusted liaison who can understand their precise needs on a host of admin and technical matters. We also work closely with our designers, solution managers and sales specialists to provide solutions.
Join us to do the best work of your career and make a profound social impact as a Field Service Engineer 2 on our Field Service Team in Childress, Texas.
What you’ll achieve
As a Field Service Engineer , you will collaborate with peers, apply technical expertise, diagnosis tools and analytical practices to resolve customer issues, taking care of our customers by delivering outstanding on-site support and creating a great customer experience.
You will:
Triage issues with direction from Dell support
Execute plan of action from Dell Domain Engineer/L3 - (communicate using Teams, Email, and Phone)
Document POA results, logs and service report (parts numbers/PPID of old/new parts replaced) to Dell via case email
Reseating parts, swap or replace parts, upgrading firmware as needed
Sever testing and validation (running diagnostics, capturing & uploading logs)
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements:
5+ years of professional experience, plus either an Associate's Degree in a technical discipline OR an equivalent combination of professional experience and education
Experience delivering technical Field Services supporting hardware and software at client sites
Experience in a customer facing role, including successfully reporting and presenting to all levels of the organization
Experience working in locations where client has a large, concentrated deployment of assets and experience with networking and Fiber
Must be able to lift a minimum of 50 lbs waist high to replace components on the server stacks
Desirable Requirements:
Dell EMC Proven Professional Specialist Level certification (1 or more: CPSD (Converged, Hyper Converged) and Server (PowerEdge)
Industry certifications CompTIA Certifications: Tech+, A+, Security+, Network+, etc. and Networking certifications CCNA or equivalent
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for this position is $72,000 - $93,500.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R286544
Senior Principal Thermal Engineer (Rack-Level Data Center Solutions)
✦ New 🏢 Dell
$174,250
Senior Principal Thermal Engineer
Thermal Engineering leads and delivers the development of innovative and compliant thermal design solutions, as well as cross-functional interfaces for computer systems and peripherals. Our team conducts the analysis, feasibility studies and testing of thermal products, instruments, subassemblies and packaging for new and existing products – and then oversees the introduction of design changes to the manufacturing organizations.
As AI growth is accelerating, Dell Technologies is developing ground-breaking technologies and customer solutions to lead the industry. These technologies are rapidly changing and we’re developing best-in class AI, Cloud, High Performance Computing (HPC), Edge computing devices and enterprise networking, server and storage products.
Join us to do the best work of your career and make a profound social impact as a Senior Principal Thermal Engineer on our IT Rack Infrastructure Engineering team in Hopkinton, Massachusetts or Austin, Texas .
What you’ll achieve
As a Senior Principal Thermal Engineer , you will collaborate with our global thermal, electrical and mechanical engineering community to develop Rack-Level Data Center solutions for Dell’s enterprise customers and partners.
You will
Design rack-level heat exchange and coolant distribution systems
Develop coolant distribution solutions within the loop for parallel flow solutions and support cooling network sizing
Create and evaluate concepts for new, innovative air and liquid cooling solutions and assess feasibility
Collaborate with mechanical engineering teams to drive design trade‑offs in rack‑level air and liquid cooling solutions
Ensure designs are manufacturable, cost‑effective and highly reliable
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
12+ years in a thermal engineering role to include experience with server rack cooling systems within Data Centers or equivalent skill
Expertise in internal fluid dynamics and heat transfer
Experience with electronics cooling, cooling distribution units (CDUs) and thermal systems controls
Skilled at analyzing options and selecting critical design elements for product development
Excellent communication skills with ability to collaborate with and influence global teams
Desirable Requirements
BS, MS or PhD in mechanical engineering or related field
Compensation
Dell is committed to fair and equitable compensation practices. The base salary range for this position is $174,250-$225,500.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R283898
Thermal Engineering leads and delivers the development of innovative and compliant thermal design solutions, as well as cross-functional interfaces for computer systems and peripherals. Our team conducts the analysis, feasibility studies and testing of thermal products, instruments, subassemblies and packaging for new and existing products – and then oversees the introduction of design changes to the manufacturing organizations.
As AI growth is accelerating, Dell Technologies is developing ground-breaking technologies and customer solutions to lead the industry. These technologies are rapidly changing and we’re developing best-in class AI, Cloud, High Performance Computing (HPC), Edge computing devices and enterprise networking, server and storage products.
Join us to do the best work of your career and make a profound social impact as a Senior Principal Thermal Engineer on our IT Rack Infrastructure Engineering team in Hopkinton, Massachusetts or Austin, Texas .
What you’ll achieve
As a Senior Principal Thermal Engineer , you will collaborate with our global thermal, electrical and mechanical engineering community to develop Rack-Level Data Center solutions for Dell’s enterprise customers and partners.
You will
Design rack-level heat exchange and coolant distribution systems
Develop coolant distribution solutions within the loop for parallel flow solutions and support cooling network sizing
Create and evaluate concepts for new, innovative air and liquid cooling solutions and assess feasibility
Collaborate with mechanical engineering teams to drive design trade‑offs in rack‑level air and liquid cooling solutions
Ensure designs are manufacturable, cost‑effective and highly reliable
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
12+ years in a thermal engineering role to include experience with server rack cooling systems within Data Centers or equivalent skill
Expertise in internal fluid dynamics and heat transfer
Experience with electronics cooling, cooling distribution units (CDUs) and thermal systems controls
Skilled at analyzing options and selecting critical design elements for product development
Excellent communication skills with ability to collaborate with and influence global teams
Desirable Requirements
BS, MS or PhD in mechanical engineering or related field
Compensation
Dell is committed to fair and equitable compensation practices. The base salary range for this position is $174,250-$225,500.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R283898
Senior Hardware Engineer
✦ New 🏢 Dell
$124,000
Senior Hardware Engineer
The reputation of Dell Technologies for delivering award-winning hardware is legendary and our Hardware Engineering team is at the heart of it. We design and develop analogue as well as digital hardware products – not just computer or network hardware devices but peripherals too. Recognized for our high level of technical expertise in a variety of engineering disciplines, we’re involved across the development lifecycle – from research to the building, testing and delivery of completed products. Innovators in our field, we lead the way in exploring new concepts, approaches, processes, materials and components.
Join us to do the best work of your career and make a profound social impact as a Senior Hardware Engineer on our Hardware Engineering Team in Hopkinton, Massachusetts or Austin, Texas .
What you’ll achieve
As a Senior Hardware Engineer , you’ll deliver enterprise class hardware, made up of a wide range of cutting-edge technologies, to dozens of product lines and thousands of customers. You’ll be exposed to all aspects of hardware engineering, working closely with firmware, mechanical, power and thermal engineers. You’ll work in a fast-paced environment with a team of highly skilled engineers providing both support and guidance. It is a team fueled by collaboration and a company deeply committed to integrity and responsibility.
You will:
Develop solutions to complex engineering problems
Support senior architects while collaborating across all disciplines (hardware, software, mechanical, manufacturing, procurement, etc.) to ensure product requirements are being implemented to meet program goals
Author and coordinate the creation of design guides and specifications for new designs as well as drive architectural direction for next generation devices/platforms and ensure feasibility of concepts for these products
Design and development of new custom enterprise and datacenter solutions with technologies including x86, ARM SoCs, DDR4/DDR5, NVMeoF, PCIe, GPUs and DPUs.
Work closely with Original Design Manufacturer (ODM)/Joint Design Manufacturer (JDM) partner to execute a design against the specified architecture, review the design and validation results
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
Proficiency in hardware design, analysis and debugging of complex printed circuit boards
Experience in computer architecture and designing with at least one of the following high-speed interfaces: Peripheral Component Interconnect Express (PCIe), Double Data Rate (DDR), Serial Attached SCSI (SAS) or Ethernet
Able to conduct and communicate design and feature analysis based on a given set of requirements. Expected to set standards and achieve design targets (cost, performance, reliability etc.) for product through proper design choices, component selection and/or supplier selection.
Desirable Requirements
Typically requires 5+ years of related experience in an engineering role with a Bachelor’s degree; or 3+ years with a Master’s degree; or 1+ years with a PhD; or equivalent experience
BS in Electrical or Computer Engineering
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for this position is $124,000.00 – $186,000.00
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R285154
The reputation of Dell Technologies for delivering award-winning hardware is legendary and our Hardware Engineering team is at the heart of it. We design and develop analogue as well as digital hardware products – not just computer or network hardware devices but peripherals too. Recognized for our high level of technical expertise in a variety of engineering disciplines, we’re involved across the development lifecycle – from research to the building, testing and delivery of completed products. Innovators in our field, we lead the way in exploring new concepts, approaches, processes, materials and components.
Join us to do the best work of your career and make a profound social impact as a Senior Hardware Engineer on our Hardware Engineering Team in Hopkinton, Massachusetts or Austin, Texas .
What you’ll achieve
As a Senior Hardware Engineer , you’ll deliver enterprise class hardware, made up of a wide range of cutting-edge technologies, to dozens of product lines and thousands of customers. You’ll be exposed to all aspects of hardware engineering, working closely with firmware, mechanical, power and thermal engineers. You’ll work in a fast-paced environment with a team of highly skilled engineers providing both support and guidance. It is a team fueled by collaboration and a company deeply committed to integrity and responsibility.
You will:
Develop solutions to complex engineering problems
Support senior architects while collaborating across all disciplines (hardware, software, mechanical, manufacturing, procurement, etc.) to ensure product requirements are being implemented to meet program goals
Author and coordinate the creation of design guides and specifications for new designs as well as drive architectural direction for next generation devices/platforms and ensure feasibility of concepts for these products
Design and development of new custom enterprise and datacenter solutions with technologies including x86, ARM SoCs, DDR4/DDR5, NVMeoF, PCIe, GPUs and DPUs.
Work closely with Original Design Manufacturer (ODM)/Joint Design Manufacturer (JDM) partner to execute a design against the specified architecture, review the design and validation results
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
Proficiency in hardware design, analysis and debugging of complex printed circuit boards
Experience in computer architecture and designing with at least one of the following high-speed interfaces: Peripheral Component Interconnect Express (PCIe), Double Data Rate (DDR), Serial Attached SCSI (SAS) or Ethernet
Able to conduct and communicate design and feature analysis based on a given set of requirements. Expected to set standards and achieve design targets (cost, performance, reliability etc.) for product through proper design choices, component selection and/or supplier selection.
Desirable Requirements
Typically requires 5+ years of related experience in an engineering role with a Bachelor’s degree; or 3+ years with a Master’s degree; or 1+ years with a PhD; or equivalent experience
BS in Electrical or Computer Engineering
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for this position is $124,000.00 – $186,000.00
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R285154
Principal and Senior Mechanical Engineer - ME Center of Excellence
✦ New 🏢 Dell
$144,500
Mechanical Senior & Mechanical Principal Engineers
At the Mechanical Engineering Center of Excellence (MECOE), we're obsessed with driving innovation to deliver transformative outcomes for our customers. We develop and execute technology strategies that push the boundaries of what's possible, leveraging our expertise in applied research and advanced engineering to create game-changing solutions. Through strategic engagements with key suppliers and partners, we accelerate technology development and bring innovative ideas to reality. Our team is relentless in its pursuit of excellence, collaborating across functions to turn visionary concepts into tangible products that exceed customer expectations. By fostering a culture of innovation and experimentation, we empower the creation of novel solutions that drive meaningful impact and improve the lives of those we serve. At MECOE, we're driven by a singular focus: to harness the power of innovation to deliver better outcomes, faster, and to make a lasting difference for our customers
Join us to do the best work of your career and make a profound social impact as a Mechanical Senior or a Mechanical Principal Engineer on our Mechanical Engineer CoE team in Austin, Texas .
What you’ll achieve As a Mechanical Senior or a Mechanical Principal Engineer , you will spearhead the design, analysis, and validation of mechanical components and assemblies, driving innovation and excellence in every aspect of development. You will lead the charge in conducting and participating in engineering tests, pushing the boundaries of what's possible to ensure the robustness and optimal performance of new products. In this role, you will pioneer early innovation with suppliers, identifying and integrating game-changing features that accelerate our platform schedules and drive low-risk integration. You will collaborate with cross-functional teams, including electrical engineering, manufacturing, quality, tooling engineering, and other development groups, to champion the successful development and launch of groundbreaking products.
We are currently adding new talent to our Mechanical Center of Excellence at various experience levels. If you do not meet our requirements for these two roles, we would love to consider you for our other levels.
You will:
Execute technology development strategies that drive business growth and customer satisfaction
Engage with key technology partners to develop proof of concepts and to influence technology roadmaps
Collaborate cross-functionally to ensure alignment and integration of mechanical strategies
Execute and support engineering test activities to confirm the proper performance of new designs.
Lead the detailed mechanical design efforts for designated components. | Deliver solutions to provide better outcomes for our customers and exceed expectations
Take the first step towards your dream career Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role: Essential Requirements 5+ years (Mechanical Senior Engineer) or 8+ years (Mechanical Principal Engineer) of experience in Mechanical Engineering, with proven expertise in product design and optimization across multiple technical disciplines
Advanced proficiency in 3D CAD systems, including concept modeling, production model interrogation, and clear communication of design ideas
Deep knowledge of mechanical simulations, tolerance analysis, and manufacturing-driven design, ensuring robust and efficient product development
Expert understanding of mechanical drawings, 3D databases, and statistical quality/process control methods, leveraging tools for precision and reliability
Demonstrated success in collaborating with external partners to deliver innovative solutions for enterprise and consumer products
Desirable Requirements
Bachelor’s or Master’s in Mechanical Engineering | 5+ years using Pro-E/ CREO and ANSY
Specialized in the design and analysis of electronics enclosures, with experience in PC, server, or similar product platforms or experience in developing intellectual property and patent generation
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for the two positions: Mechanical Principal Engineer $144,500 to $187,000; Mechanical Senior Engineer $116450 - $150,700.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R286299
At the Mechanical Engineering Center of Excellence (MECOE), we're obsessed with driving innovation to deliver transformative outcomes for our customers. We develop and execute technology strategies that push the boundaries of what's possible, leveraging our expertise in applied research and advanced engineering to create game-changing solutions. Through strategic engagements with key suppliers and partners, we accelerate technology development and bring innovative ideas to reality. Our team is relentless in its pursuit of excellence, collaborating across functions to turn visionary concepts into tangible products that exceed customer expectations. By fostering a culture of innovation and experimentation, we empower the creation of novel solutions that drive meaningful impact and improve the lives of those we serve. At MECOE, we're driven by a singular focus: to harness the power of innovation to deliver better outcomes, faster, and to make a lasting difference for our customers
Join us to do the best work of your career and make a profound social impact as a Mechanical Senior or a Mechanical Principal Engineer on our Mechanical Engineer CoE team in Austin, Texas .
What you’ll achieve As a Mechanical Senior or a Mechanical Principal Engineer , you will spearhead the design, analysis, and validation of mechanical components and assemblies, driving innovation and excellence in every aspect of development. You will lead the charge in conducting and participating in engineering tests, pushing the boundaries of what's possible to ensure the robustness and optimal performance of new products. In this role, you will pioneer early innovation with suppliers, identifying and integrating game-changing features that accelerate our platform schedules and drive low-risk integration. You will collaborate with cross-functional teams, including electrical engineering, manufacturing, quality, tooling engineering, and other development groups, to champion the successful development and launch of groundbreaking products.
We are currently adding new talent to our Mechanical Center of Excellence at various experience levels. If you do not meet our requirements for these two roles, we would love to consider you for our other levels.
You will:
Execute technology development strategies that drive business growth and customer satisfaction
Engage with key technology partners to develop proof of concepts and to influence technology roadmaps
Collaborate cross-functionally to ensure alignment and integration of mechanical strategies
Execute and support engineering test activities to confirm the proper performance of new designs.
Lead the detailed mechanical design efforts for designated components. | Deliver solutions to provide better outcomes for our customers and exceed expectations
Take the first step towards your dream career Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role: Essential Requirements 5+ years (Mechanical Senior Engineer) or 8+ years (Mechanical Principal Engineer) of experience in Mechanical Engineering, with proven expertise in product design and optimization across multiple technical disciplines
Advanced proficiency in 3D CAD systems, including concept modeling, production model interrogation, and clear communication of design ideas
Deep knowledge of mechanical simulations, tolerance analysis, and manufacturing-driven design, ensuring robust and efficient product development
Expert understanding of mechanical drawings, 3D databases, and statistical quality/process control methods, leveraging tools for precision and reliability
Demonstrated success in collaborating with external partners to deliver innovative solutions for enterprise and consumer products
Desirable Requirements
Bachelor’s or Master’s in Mechanical Engineering | 5+ years using Pro-E/ CREO and ANSY
Specialized in the design and analysis of electronics enclosures, with experience in PC, server, or similar product platforms or experience in developing intellectual property and patent generation
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for the two positions: Mechanical Principal Engineer $144,500 to $187,000; Mechanical Senior Engineer $116450 - $150,700.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R286299
Field Service Engineer 2 Afton, Texas
✦ New 🏢 Dell
$72,000
Job Posting Field Services Engineer 2
At Dell Technologies, we take pride in providing our customers with a quality of service that more than matches the quality of our products. Our Field Service team is integral to making sure the service to our customers is seamless, responsive and focused. Taking our technical skills to customer sites, we’re responsible for everything from installation, configuration and integration, through to maintenance, troubleshooting and repair. Customers see us as a trusted liaison who can understand their precise needs on a host of admin and technical matters. We also work closely with our designers, solution managers and sales specialists to provide solutions.
Join us to do the best work of your career and make a profound social impact as a Field Service Engineer 2 on our Field Service Team in Afton, Texas.
What you’ll achieve
As a Field Service Engineer , you will collaborate with peers, apply technical expertise, diagnosis tools and analytical practices to resolve customer issues, taking care of our customers by delivering outstanding on-site support and creating a great customer experience.
You will:
Triage issues with direction from Dell support
Execute plan of action from Dell Domain Engineer/L3 - (communicate using Teams, Email, and Phone)
Document POA results, logs and service report (parts numbers/PPID of old/new parts replaced) to Dell via case email
Reseating parts, swap or replace parts, upgrading firmware as needed
Sever testing and validation (running diagnostics, capturing & uploading logs)
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements:
5+ years of professional experience, plus either an Associate's Degree in a technical discipline OR an equivalent combination of professional experience and education
Experience delivering technical Field Services supporting hardware and software at client sites
Experience in a customer facing role, including successfully reporting and presenting to all levels of the organization
Experience working in locations where client has a large, concentrated deployment of assets and experience with networking and Fiber
Must be able to lift a minimum of 50 lbs waist high to replace components on the server stacks
Desirable Requirements:
Dell EMC Proven Professional Specialist Level certification (1 or more: CPSD (Converged, Hyper Converged) and Server (PowerEdge)
Industry certifications CompTIA Certifications: Tech+, A+, Security+, Network+, etc. and Networking certifications CCNA or equivalent
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for this position is $$72,000 - $93,500..
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R286502
At Dell Technologies, we take pride in providing our customers with a quality of service that more than matches the quality of our products. Our Field Service team is integral to making sure the service to our customers is seamless, responsive and focused. Taking our technical skills to customer sites, we’re responsible for everything from installation, configuration and integration, through to maintenance, troubleshooting and repair. Customers see us as a trusted liaison who can understand their precise needs on a host of admin and technical matters. We also work closely with our designers, solution managers and sales specialists to provide solutions.
Join us to do the best work of your career and make a profound social impact as a Field Service Engineer 2 on our Field Service Team in Afton, Texas.
What you’ll achieve
As a Field Service Engineer , you will collaborate with peers, apply technical expertise, diagnosis tools and analytical practices to resolve customer issues, taking care of our customers by delivering outstanding on-site support and creating a great customer experience.
You will:
Triage issues with direction from Dell support
Execute plan of action from Dell Domain Engineer/L3 - (communicate using Teams, Email, and Phone)
Document POA results, logs and service report (parts numbers/PPID of old/new parts replaced) to Dell via case email
Reseating parts, swap or replace parts, upgrading firmware as needed
Sever testing and validation (running diagnostics, capturing & uploading logs)
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements:
5+ years of professional experience, plus either an Associate's Degree in a technical discipline OR an equivalent combination of professional experience and education
Experience delivering technical Field Services supporting hardware and software at client sites
Experience in a customer facing role, including successfully reporting and presenting to all levels of the organization
Experience working in locations where client has a large, concentrated deployment of assets and experience with networking and Fiber
Must be able to lift a minimum of 50 lbs waist high to replace components on the server stacks
Desirable Requirements:
Dell EMC Proven Professional Specialist Level certification (1 or more: CPSD (Converged, Hyper Converged) and Server (PowerEdge)
Industry certifications CompTIA Certifications: Tech+, A+, Security+, Network+, etc. and Networking certifications CCNA or equivalent
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for this position is $$72,000 - $93,500..
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R286502
Senior Principal Engineer, Solutions Architecture
✦ New 🏢 Dell
$170,850
Principal Engineer, Solutions Architect – Liquid Cooling (RDHx & CDU Systems)
When our customers are looking for consultative IT expertise, where else would they turn but to the company driving human progress through technology? Our Solutions Architecture team within Professional Services are specialists in package customization and integration as well as total, end-to-end solutions in targeted industry segments. After detailed consultation with our customers and careful analysis, we develop new IT systems or replace existing systems that support customers’ strategic, operational and financial goals.
Join us to do the best work of your career and make a profound social impact as a Principal Engineer, Solutions Architect – Liquid Cooling (RDHx & CDU Systems) on our Solutions Architecture Team in Austin, Texas. Or Remote United States ( Ability to travel to customer locations)
What you’ll achieve
We are seeking a Senior Solutions Architect (SA) specializing in Data Center Liquid Cooling, with emphasis on rear‑door heat exchangers (RDHx) and cooling distribution units (CDUs). This is a new capability within our organization, and you will serve as our primary expert in liquid‑based thermal solutions for high‑density compute environments.
In this post‑sales architecture role, you will work directly with customers to understand their requirements, design full liquid cooling solutions, support field teams during deployments, and help shape our internal best practices around liquid cooling technologies.
You will:
Customer Engagement & Post‑Sales Architecture
Lead technical discovery sessions with customers to gather thermal, environmental, mechanical, and operational requirements
Design end‑to‑end liquid cooling solutions featuring rear‑door heat exchangers, CDUs, manifolds, hoses, fittings, and facility water loop considerations
Produce detailed solution designs including schematics, BOMs, system flow diagrams, thermal performance expectations, and installation guidelines
Translate customer requirements into scalable, supportable, and reliable architectures
Deployment & Field Support
Support field engineering teams during installation, commissioning, and validation of RDHx and CDU systems
Provide technical oversight on-site or remotely, ensuring the deployed system aligns with the approved design
Troubleshoot flow rates, pressure drops, temperature deltas, coolant quality, sensor behavior, and CDU operational parameters
Assist with acceptance testing, monitoring configurations, and integration with facility cooling infrastructure
Internal SME & Cross-Functional Collaboration
Serve as the internal authority on liquid cooling within engineering, operations, sales, and product
Develop internal documentation: reference architectures, best practices, safety guidelines, and deployment playbooks
Train field teams and adjacent groups unfamiliar with liquid cooling practices
Collaborate with OEMs and vendors to stay aligned with the latest RDHx and CDU technologies
Practice Development
Define standards and repeatable processes for liquid cooling implementations.
Contribute to service offerings that support deployment, maintenance, and ongoing optimization of liquid cooling systems
Help shape long-term strategy and roadmap as our liquid cooling practice grows
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
7+ years in data center infrastructure, solutions architecture, mechanical/thermal engineering, or HPC environments
Hands-on experience with: Rear-door heat exchangers (enclosed or active systems)
Cooling Distribution Units (CDUs), Secondary Fluids Network (SFN) design and fabrication
Coolant loop design, manifolds, flexible hose routing, connectors, drip‑less fittings, sensors, etc.
Rack and system level liquid cooling technologies, including multiple cooling loops, and direct-to-chip cooling
Strong understanding of: Heat transfer, thermodynamics, and fluid mechanics
Facility water loops and integration points
Flow balancing, delta‑T analysis, and pump performance curves
Leak detection and safety best practices
Familiarity with data center power/cooling concepts (rack-level thermals, airflow management).
Architecture & Customer-Facing Skills
Experience conducting customer requirement gathering and converting needs into detailed solution architectures
Ability to write clear architectural documentation, diagrams, and BOMs
Comfort supporting deployments hands‑on and resolving technical issues in the field
Ability to travel to customer’s locations1
Soft Skills
Excellent communication and customer engagement skills
Ability to simplify complex engineering topics for non‑technical audiences
Self‑starter comfortable defining processes and building practice maturity
Working cross-functionally across different teams
Desirable Requirements
Bachelor’s degree or higher in Mechanical Engineering, Thermal Engineering, or similar field
Proficiency with Thermal Simulation tools (ANSYS Icepak, FloTHERM, FloEFD, ANSYS Mechanical)
Experience with high‑density compute environments (AI/ML, HPC, GPU racks)
Data center‑related certifications (CDCP, CDCS, DCEP Generalist, DCEP-HVAC Specialist etc.)
Familiarity with RDHx and CDU vendors such as Vertiv, Schneider Electric, Motivair, Liebert, Rittal, nVent, CoolIT, etc.
Knowledge of monitoring and control systems (Modbus, BACnet, SNMP, CDU controllers)
Compensation: Dell is committed to Fair and Equitable compensation practices. The Base Salary Range for this role is $170,850 to $ 221,100.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R286406
When our customers are looking for consultative IT expertise, where else would they turn but to the company driving human progress through technology? Our Solutions Architecture team within Professional Services are specialists in package customization and integration as well as total, end-to-end solutions in targeted industry segments. After detailed consultation with our customers and careful analysis, we develop new IT systems or replace existing systems that support customers’ strategic, operational and financial goals.
Join us to do the best work of your career and make a profound social impact as a Principal Engineer, Solutions Architect – Liquid Cooling (RDHx & CDU Systems) on our Solutions Architecture Team in Austin, Texas. Or Remote United States ( Ability to travel to customer locations)
What you’ll achieve
We are seeking a Senior Solutions Architect (SA) specializing in Data Center Liquid Cooling, with emphasis on rear‑door heat exchangers (RDHx) and cooling distribution units (CDUs). This is a new capability within our organization, and you will serve as our primary expert in liquid‑based thermal solutions for high‑density compute environments.
In this post‑sales architecture role, you will work directly with customers to understand their requirements, design full liquid cooling solutions, support field teams during deployments, and help shape our internal best practices around liquid cooling technologies.
You will:
Customer Engagement & Post‑Sales Architecture
Lead technical discovery sessions with customers to gather thermal, environmental, mechanical, and operational requirements
Design end‑to‑end liquid cooling solutions featuring rear‑door heat exchangers, CDUs, manifolds, hoses, fittings, and facility water loop considerations
Produce detailed solution designs including schematics, BOMs, system flow diagrams, thermal performance expectations, and installation guidelines
Translate customer requirements into scalable, supportable, and reliable architectures
Deployment & Field Support
Support field engineering teams during installation, commissioning, and validation of RDHx and CDU systems
Provide technical oversight on-site or remotely, ensuring the deployed system aligns with the approved design
Troubleshoot flow rates, pressure drops, temperature deltas, coolant quality, sensor behavior, and CDU operational parameters
Assist with acceptance testing, monitoring configurations, and integration with facility cooling infrastructure
Internal SME & Cross-Functional Collaboration
Serve as the internal authority on liquid cooling within engineering, operations, sales, and product
Develop internal documentation: reference architectures, best practices, safety guidelines, and deployment playbooks
Train field teams and adjacent groups unfamiliar with liquid cooling practices
Collaborate with OEMs and vendors to stay aligned with the latest RDHx and CDU technologies
Practice Development
Define standards and repeatable processes for liquid cooling implementations.
Contribute to service offerings that support deployment, maintenance, and ongoing optimization of liquid cooling systems
Help shape long-term strategy and roadmap as our liquid cooling practice grows
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
7+ years in data center infrastructure, solutions architecture, mechanical/thermal engineering, or HPC environments
Hands-on experience with: Rear-door heat exchangers (enclosed or active systems)
Cooling Distribution Units (CDUs), Secondary Fluids Network (SFN) design and fabrication
Coolant loop design, manifolds, flexible hose routing, connectors, drip‑less fittings, sensors, etc.
Rack and system level liquid cooling technologies, including multiple cooling loops, and direct-to-chip cooling
Strong understanding of: Heat transfer, thermodynamics, and fluid mechanics
Facility water loops and integration points
Flow balancing, delta‑T analysis, and pump performance curves
Leak detection and safety best practices
Familiarity with data center power/cooling concepts (rack-level thermals, airflow management).
Architecture & Customer-Facing Skills
Experience conducting customer requirement gathering and converting needs into detailed solution architectures
Ability to write clear architectural documentation, diagrams, and BOMs
Comfort supporting deployments hands‑on and resolving technical issues in the field
Ability to travel to customer’s locations1
Soft Skills
Excellent communication and customer engagement skills
Ability to simplify complex engineering topics for non‑technical audiences
Self‑starter comfortable defining processes and building practice maturity
Working cross-functionally across different teams
Desirable Requirements
Bachelor’s degree or higher in Mechanical Engineering, Thermal Engineering, or similar field
Proficiency with Thermal Simulation tools (ANSYS Icepak, FloTHERM, FloEFD, ANSYS Mechanical)
Experience with high‑density compute environments (AI/ML, HPC, GPU racks)
Data center‑related certifications (CDCP, CDCS, DCEP Generalist, DCEP-HVAC Specialist etc.)
Familiarity with RDHx and CDU vendors such as Vertiv, Schneider Electric, Motivair, Liebert, Rittal, nVent, CoolIT, etc.
Knowledge of monitoring and control systems (Modbus, BACnet, SNMP, CDU controllers)
Compensation: Dell is committed to Fair and Equitable compensation practices. The Base Salary Range for this role is $170,850 to $ 221,100.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
Job ID: R286406
Senior System Development Engineer – AI Technologies
✦ New 🏢 Dell
$123,000
Senior Systems Development Engineer
Our customers’ system requirements are usually highly complex. Bringing together hardware and software systems design, Systems Development Engineering operates at the very cutting edge of technology to meet them. We design and develop electronic and electro-mechanical or systems-orientated products, conduct feasibility studies on engineering proposals and prepare installation, operation and maintenance specifications and instructions. We’re proud to deliver programs and products to the highest quality standards, on time and within budget.
Join us to do the best work of your career and make a profound social impact as a Senior Systems Development Engineer on our Systems Development Engineering Team in Austin, Texas.
What you’ll achieve
As a Senior Systems Development Engineer, you will design, define and implement complex system requirements for customers and prepare studies and analyses of existing systems.
You will:
System Platform Engineering: Lead bring‑up, configuration, and validation of system platforms supporting AI workloads (servers, GPU racks, accelerators, networking fabrics); work with BIOS/UEFI, BMC, firmware, drivers, and kernel subsystems to ensure system readiness for large‑scale AI deployments; perform hardware–software co-validation of CPUs, GPUs, DPUs, NICs, accelerators, and memory subsystems under AI‑heavy workloads; validate PCIe fabric behavior, NUMA topology, and data‑path efficiency for model training and inference.
System Debugging & Hardware–Software Interaction : Diagnose complex issues across BIOS, firmware, OS, driver stack, container runtime, orchestration layer, and AI frameworks; analyze system logs, kernel traces, hardware event telemetry, GPU health signals, and fabric diagnostics; conduct root‑cause analysis of performance bottlenecks, training failures, model divergence, and hardware stability issues; collaborate with silicon, firmware, OS, and AI software teams to resolve issues rapidly.
AI Cluster & Rack‑Level Operations: Deploy and manage AI clusters: GPU servers, accelerators, high‑speed networking (InfiniBand, RoCE), and storage systems; validate cluster readiness for distributed training, including bandwidth, latency, topology checks, and gradient‑sync performance; work with orchestration systems (Kubernetes, Slurm, Ray, Docker, Singularity) to run and optimize AI pipelines; partner with data center teams for rack integration, power/thermal analysis, and capacity planning
AI Benchmarking & Performance Analysis: Execute and analyze standard AI benchmarks (MLPerf Training, MLPerf Inference, SPEC AI Benchmarks); build custom benchmarks for transformer models, LLMs, computer vision, multimodal models, and recommendation systems; interpret results to provide optimization recommendations at the hardware, OS, driver, and framework levels; document findings and drive improvements across the platform and AI software ecosystem.
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
Bachelor’s or Master’s degree in Computer Engineering, Computer Science, Electrical Engineering , or related field
5+ years of experience in system engineering, platform development, or hardware–software validation
Strong understanding of x86 system architecture , CPU/GPU/accelerator internals , memory systems, and I/O subsystems
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for this position is $123k - $170k.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
#LI-Onsite
Job ID: R287167
Our customers’ system requirements are usually highly complex. Bringing together hardware and software systems design, Systems Development Engineering operates at the very cutting edge of technology to meet them. We design and develop electronic and electro-mechanical or systems-orientated products, conduct feasibility studies on engineering proposals and prepare installation, operation and maintenance specifications and instructions. We’re proud to deliver programs and products to the highest quality standards, on time and within budget.
Join us to do the best work of your career and make a profound social impact as a Senior Systems Development Engineer on our Systems Development Engineering Team in Austin, Texas.
What you’ll achieve
As a Senior Systems Development Engineer, you will design, define and implement complex system requirements for customers and prepare studies and analyses of existing systems.
You will:
System Platform Engineering: Lead bring‑up, configuration, and validation of system platforms supporting AI workloads (servers, GPU racks, accelerators, networking fabrics); work with BIOS/UEFI, BMC, firmware, drivers, and kernel subsystems to ensure system readiness for large‑scale AI deployments; perform hardware–software co-validation of CPUs, GPUs, DPUs, NICs, accelerators, and memory subsystems under AI‑heavy workloads; validate PCIe fabric behavior, NUMA topology, and data‑path efficiency for model training and inference.
System Debugging & Hardware–Software Interaction : Diagnose complex issues across BIOS, firmware, OS, driver stack, container runtime, orchestration layer, and AI frameworks; analyze system logs, kernel traces, hardware event telemetry, GPU health signals, and fabric diagnostics; conduct root‑cause analysis of performance bottlenecks, training failures, model divergence, and hardware stability issues; collaborate with silicon, firmware, OS, and AI software teams to resolve issues rapidly.
AI Cluster & Rack‑Level Operations: Deploy and manage AI clusters: GPU servers, accelerators, high‑speed networking (InfiniBand, RoCE), and storage systems; validate cluster readiness for distributed training, including bandwidth, latency, topology checks, and gradient‑sync performance; work with orchestration systems (Kubernetes, Slurm, Ray, Docker, Singularity) to run and optimize AI pipelines; partner with data center teams for rack integration, power/thermal analysis, and capacity planning
AI Benchmarking & Performance Analysis: Execute and analyze standard AI benchmarks (MLPerf Training, MLPerf Inference, SPEC AI Benchmarks); build custom benchmarks for transformer models, LLMs, computer vision, multimodal models, and recommendation systems; interpret results to provide optimization recommendations at the hardware, OS, driver, and framework levels; document findings and drive improvements across the platform and AI software ecosystem.
Take the first step towards your dream career
Every Dell Technologies team member brings something unique to the table. Here’s what we are looking for with this role:
Essential Requirements
Bachelor’s or Master’s degree in Computer Engineering, Computer Science, Electrical Engineering , or related field
5+ years of experience in system engineering, platform development, or hardware–software validation
Strong understanding of x86 system architecture , CPU/GPU/accelerator internals , memory systems, and I/O subsystems
Compensation
Dell is committed to fair and equitable compensation practices. The salary range for this position is $123k - $170k.
Benefits and Perks of working at Dell Technologies
Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member — right now at
Who we are
We believe that each of us has the power to make an impact. That’s why we put our team members at the center of everything we do. If you’re looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we’re looking for you.
Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us.
Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.
#LI-Onsite
Job ID: R287167
U
Quality Property Reinspector- (Field- Multiple TX Locations) (***Multiple Openings***)
✦ New
Salary not disclosed
Why USAA?
At USAA, our mission is to empower our members to achieve financial security through highly competitive products, exceptional service and trusted advice. We seek to be the #1 choice for the military community and their families.
Embrace a fulfilling career at USAA, where our core values – honesty, integrity, loyalty and service – define how we treat each other and our members. Be part of what truly makes us special and impactful.
The Opportunity
***Multiple Openings***
As a dedicated Quality Property Reinspector, you will ensure a quality property repair estimate and valuation product by focusing on targeted areas to continuously calibrate the reinspection process, validates reported findings and provides an objective subject matter expert (SME) knowledge to the Property Claims community and Third-Party vendors. Drives USAA’s financial strength by measuring and reporting estimate accuracy for Property Claims and Third-Party vendors.
This is a field-based role that will require you to reside and work within one of the following regions: San Antonio, TX, Austin, TX, Dallas/Ft Worth, TX, or Houston, TX. Candidates who are willing and able to work in the following regions: San Antonio, TX, Austin, TX, Dallas/Ft Worth, TX, or Houston, TX are encouraged to apply. Relocation assistance is not available for this position.
What you’ll do:
- Measures property estimates accuracy and efficiency through conducting thorough, timely re-inspections/audits of property and property repair estimates, and reports on payment accuracy and compliance by method of inspection (Staff, PDRP, Independents and Third-Party vendors).
- Reports reinspection/audit findings on estimate accuracy and compliance by method of inspection (Staff, PDRP, Independents and Third-Party vendors) for corporate score cards.
- Assesses the health of property estimating through participation in ad-hoc and market audits, working closely with Claims stakeholders to identify areas for improvement.
- Provides objective, proactive, and actionable feedback of Physical Damage (PD) policy, procedures and regulations to the Claims Stakeholders and Third-Party vendors.
- Creates awareness and drives understanding of Property adjusting and estimating procedures by delivering a work product that is consistent and compliant with policy, procedures, and regulations to Claims Stakeholders.
- Serves as a Property Adjusting SME on property estimating through post audit calibration meetings, ride-a-longs with other Property employees inspecting property, training materials, Property Director teleconferences and Property Champion teleconferences.
- Applies expert knowledge of P&C insurance industry products, services, and processes to include P&C insurance policy contracts and coverages, USAA property estimate/repair process and procedures.
- Provides support for the presentation, discussion, and auditing of diagnostic estimates within key regional markets, contributing to the assessment of estimate quality. During a catastrophe, or post event, performs property reinspections for catastrophe claims with a minimum of 28 consecutive days during the catastrophe event or post event. Requires working time requirement of 7 consecutive days, 7:00AM 7:00PM, member time.
- Ensures risks associated with business activities are effectively identified, measured, monitored, and controlled in accordance with risk and compliance policies and procedures.
What you’ll have:
- High School Diploma or General Equivalency Diploma.
- 2 years relevant property field adjusting experience.
- Experience writing estimates in Xactimate and XactAnalysis.
- Knowledge and experience of property claims contracts.
- Knowledge of property construction and structural repair techniques.
- Working knowledge of Microsoft Office applications (Outlook, Word, Excel).
What sets you apart:
- Previous experience managing TPA estimating, QA, Audits.
- Strong analytical skills with demonstrated ability to perform root cause analysis and provide useful insights.
- 4+ recent years writing Dwelling estimates in Xactimate and XactAnalysis.
- 4+ recent years of working property claims contract knowledge.
- Experience working with both internal and external partners/suppliers.
- Willingness to travel at least one week per month.
- Currently reside or work within any of the following regions: San Antonio, TX, Austin, TX, Dallas/Ft Worth, TX, or Houston, TX.
Physical Demand Requirements:
- Ability to lift a minimum of 35 pounds to include lifting a ladder in and out of the trunk of a car.
- Ability to climb ladders and traverse roofs, this includes the ability to work at heights while inspecting roofs and attics.
- Ability to crouch and stoop to inspect confined attic spaces and go beneath homes into crawl spaces.
- Meet all USAA safe driving requirements including verification of driving record through MVR & possession of valid driver’s license.
The above description reflects the details considered necessary to describe the principal functions of the job and should not be construed as a detailed description of all the work requirements that may be performed in the job.
Compensation range: $77,120-$147,390.
USAA does not provide visa sponsorship for this role. Please do not apply for this role if at any time (now or in the future) you will need immigration support (i.e., H-1B, TN, STEM OPT Training Plans, etc.).
Compensation: USAA has an effective process for assessing market data and establishing ranges to ensure we remain competitive. You are paid within the salary range based on your experience and market data of the position. The actual salary for this role may vary by location.
Employees may be eligible for pay incentives based on overall corporate and individual performance and at the discretion of the USAA Board of Directors.
The above description reflects the details considered necessary to describe the principal functions of the job and should not be construed as a detailed description of all the work requirements that may be performed in the job.
Benefits: At USAA our employees enjoy best-in-class benefits to support their physical, financial, and emotional wellness. These benefits include comprehensive medical, dental and vision plans, 401(k), pension, life insurance, parental benefits, adoption assistance, paid time off program with paid holidays plus 16 paid volunteer hours, and various wellness programs. Additionally, our career path planning and continuing education assists employees with their professional goals.
For more details on our outstanding benefits, visit our benefits page on .
Applications for this position are accepted on an ongoing basis, this posting will remain open until the position is filled. Thus, interested candidates are encouraged to apply the same day they view this posting.
USAA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Head of Manufacturing Test Engineering (AUSTIN)
✦ New
Salary not disclosed
Senior Manager, Manufacturing Test Development - based onsite in Austin, TX or Remote US.
Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.
You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
What can you expect to do?
LEADERSHIP RESPONSIBILITIES
- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.
- Empowered to make key decisions with respect to quality and features that may impact customer experience.
- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.
- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
FUNCTIONAL RESPONSIBILITIES
- Primary technical interface for manufacturing rack test development efforts from concept through delivery.
- Own driving resolution of all issues regarding test solutions aligned with critical path.
- Reviewer and approver of technical risks, and contingency/mitigation plans.
- Can review and provide input to material plans, test plans, test reports, lessons learned.
- Owns preventative actions so gaps in E2E process or capability are addressed long-term.
- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.
- Provide technical and product subject matter expertise to the factories and customers.
- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.
KNOWLEDGE REQUIREMENTS
- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.
- Exceptional knowledge and experience regarding product development processes and tools.
- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.
- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.
What is the experience needed to be successful in this role?
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.
- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.
- Excellent verbal and written communication skills.
- Prior experience directly or indirectly managing engineering and/or development teams.
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or international travel, up to 30%, may be required.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Jabil is seeking a Senior Manager, Manufacturing Test Development for our Austin, TX location who will directly contribute to the transformative growth within our Intelligent Infrastructure division by applying unique and innovative approaches to developing end customer product solutions.
You will be responsible for managing the technical direction of Rack scale test software and integration development programs through the lens of the customer, factory, and services. You will also be responsible for partnering and collaborating with Hyperscale & AI customers, strategic suppliers, internal engineering, product management, program management, manufacturing, test and quality teams to ensure your products meet the rigorous standards and performance expectations of Jabil’s world-class manufacturing environments and our customers.
What can you expect to do?
LEADERSHIP RESPONSIBILITIES
- Responsible for ensuring the delivery of all manufacturing test solutions for new and sustaining programs for rack-scale AI/ML and GPGPU and hardware accelerator-based server and storage platforms.
- Accountable for all onsite customer delivery commissioning tests as an extension of the manufacturing test capability.
- Strong ability to organize teams and drive the solution for multiple, complex problems cross-functionally and within various areas of technical expertise (hardware, software, firmware, performance, interoperability, etc.)
- Charged with ensuring the right level of execution discipline and engineering rigor is applied to all technical program deliverables – must lead by example.
- Empowered to make key decisions with respect to quality and features that may impact customer experience.
- Capable of influencing individuals, teams and executives to the level necessary to support delivery of programs within schedule, scope and budget boundaries.
- Able to understand how technical decisions impact the broader business, factories and customers and use these insights to lead the broader organization to optimized outcomes.
- Must be extremely detailed oriented while at the same time able to communicate complex issues in simple, actionable terms at all levels within the organization.
- Must possess a strong balance of technical skills, experience-based judgment and business acumen in all execution and decision-making activities.
- Strong ability to develop, grow and maintain healthy interpersonal relationships with peers, team members, executive leadership, customers and external partners at all times.
- Provide thought leadership and direct engineering support to multiple manufacturing sites in the areas of product, component and supplier expertise.
- Exchange knowledge and information with other Jabil facilities to ensure best practices are both shared and implemented throughout the Jabil organization.
- Guide technical and operational teams towards the successful resolution of complex and/or systemic product, process and material issues through the application of rigorous analytical methods.
- Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines).
FUNCTIONAL RESPONSIBILITIES
- Primary technical interface for manufacturing rack test development efforts from concept through delivery.
- Own driving resolution of all issues regarding test solutions aligned with critical path.
- Reviewer and approver of technical risks, and contingency/mitigation plans.
- Can review and provide input to material plans, test plans, test reports, lessons learned.
- Owns preventative actions so gaps in E2E process or capability are addressed long-term.
- Accountable for managing manufacturing technical and quality excursions through indirect coordination and hands-on engineering analysis as it pertains to your test deliverables.
- Provide technical and product subject matter expertise to the factories and customers.
- Lead highly technical and innovative RFI/RFQ responses supporting new strategic and recurring business opportunities.
KNOWLEDGE REQUIREMENTS
- Strong technical program management skills. Able to lead and direct a broad cross-functional global team.
- Exceptional knowledge and experience regarding product development processes and tools.
- Experience and deep level of understanding of server, storage, networking and GPGPU and PCIe-based accelerator architectures.
- Working knowledge of OS, driver, firmware and hardware architecture, device interactions and ability to leverage expertise to determine root cause that lead to optimized solutions.
- Deep experience in process development and process improvement. Able to lead the development of complex processes spanning multiple functions and areas of expertise.
What is the experience needed to be successful in this role?
- BS degree in Electrical/Computer Engineering, Computer Science or related field is required; MS is preferred.
- 8+ years' experience in a software or hardware product development environment with enterprise server, storage or networking products is required.
- Excellent verbal and written communication skills.
- Prior experience directly or indirectly managing engineering and/or development teams.
- Experience managing remote, multi-national and geographically dispersed development teams.
- Domestic and/or international travel, up to 30%, may be required.
Benefits Package with Jabil
Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:
- Competitive Base Salary
- Annual Bonus
- Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options
- 401K Match
- Employee Stock Purchase Plan
- Paid Time Off
- Tuition Reimbursement
- Life, AD&D, and Disability Insurance
- Commuter Benefits
- Employee Assistance Program
- Pet Insurance
- Adoption Assistance
- Annual Merit Increases
- Community Volunteer Opportunities
Remote Performance Test Engineer
✦ New 🏢 JABIL CIRCUIT, INC
Salary not disclosed
SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
LEADERSHIP AND MANAGEMENT RESPONSIBILITIES
Recruitment and Retention:
· Recruit and interview Process Technicians.
· Communicate criteria to recruiters for Process Technician position candidates.
· Coach technicians in the interviewing/hiring process.
· Monitor team member turnover; identify key factors that can be improved; make improvements.
Employee and Team Development:
· Identify individual and team strengths and development needs on an ongoing basis.
· Create and/or validate training curriculum in area of responsibility.
· Coach and mentor Process Technicians to deliver excellence to every internal and external customer.
Performance Management:
· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).
· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback.
· Express pride in staff and encourage them to feel good about their accomplishments.
· Perform team member evaluations professionally and on time.
· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.
· Coordinate activities of large teams and keep them focused in times of crises.
· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.
Communication:
· Provide communication forum for the exchange of ideas and information with the department.
· Organize verbal and written ideas clearly and use an appropriate business style.
· Ask questions; encourage input from team members.
· Assess communication style of individual team members and adapt own communication style accordingly.
TECHNICAL MANAGEMENT RESPONSIBILITIES
· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· Provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.
Remote working/work at home options are available for this role.
S
REO Resiliency Engineering and Quality Leader (Hybrid)
✦ New 🏢 Securian
Salary not disclosed
*At Securian Financial the internal position title is Infrastructure Dir."
Mission
"To lead the engineering discipline that ensures Securian's technology platforms and cloud services are built and operated with uncompromising resilience, performance, and quality. This role drives the design and automation of fault-tolerant, high-availability architectures across AWS, Azure, and GCP-ensuring the enterprise meets resiliency, scalability, and efficiency expectations at every layer of technology."
Positioning
The Director of Resilience Engineering and Quality Leader is both a strategic peer and technical counterpart to the Infrastructure & Reliability Engineering Leader.
This role provides bench depth and succession coverage for REO's most technically complex domains while driving innovation in reliability, resilience, and performance practices.
Strategic influence: Shapes cloud reliability, quality engineering, and resilience strategy across REO and Architecture domains.
Operational authority: Leads Sr. Managers and Managers who own the execution of quality, resilience, and performance engineering capabilities.
Enterprise collaboration: Works hand-in-hand with Technology, Solution, Business, Data, and Enterprise Architects to embed reliability and resilience as core architecture principles.
Scope of Accountability
Resilience Engineering & Cloud Reliability
Architect and validate fault-tolerant, regionally resilient architectures across AWS, Azure, and GCP.
Own resilience automation, chaos testing, and IaC-based recovery validation.
Lead cross-cloud reliability design reviews and failure-mode analyses for critical systems.
Quality Engineering & Continuous Testing
Define enterprise-wide quality engineering strategy integrated into CI/CD pipelines.
Drive automation-first testing (functional, non-functional, performance, resilience).
Embed observability-driven quality validation and contract testing across services.
Performance, Capacity & Efficiency Engineering
Oversee predictive capacity planning, scaling automation, and cost/efficiency optimization (FinOps/GreenOps).
Partner with Platform & Infrastructure teams to tune performance across application and platform layers.
Measure and report on performance SLIs/SLAs aligned to REO's Reliability Metrics framework.
Cross-Domain Architecture Collaboration
Partner with Enterprise Architects to codify resilience and reliability standards in technology blueprints.
Collaborate with Technology & Solution Architects to design service reliability into delivery architectures.
Engage Data Architects for data resilience, replication, and pipeline reliability.
Work with Business Architects to align technical reliability goals with critical business outcomes.
Leadership & Talent Development
Lead a team of Sr. Managers and Managers, fostering a high-performance, hands-on engineering culture.
Build and mentor top-tier technical talent in cloud reliability, resilience, and quality automation.
Partner with HR and REO Enablement to develop succession plans and technical competency frameworks.
Core Technical Competencies
AWS (primary) - Multi-account design, HA architecture, region failover, resilience automation, Terraform/CDK/CloudFormation.
Azure & GCP (secondary) - Compute, networking, and reliability constructs; hybrid cloud design and failover integration.
Infrastructure as Code (IaC) - Deep proficiency in Terraform, policy-as-code (OPA/Conftest), drift detection, pipeline integration.
Reliability & Chaos Engineering - AWS Fault Injection Simulator, Gremlin, steady-state hypothesis design.
Observability & Quality Automation - OpenTelemetry, Prometheus, CloudWatch, K6, Gatling; CI/CD quality gates and dashboards.
Performance Engineering - Load, stress, and soak testing automation; performance profiling and SLO alignment.
Disaster Recovery Automation - Cross-region orchestration, IaC-driven DR runs, replication validation.
FinOps/GreenOps - Cloud cost and efficiency automation, carbon-aware scaling policies.
Leadership Competencies
Strategic Technical Leadership: Operates at the intersection of deep engineering and executive strategy.
Multi-Domain Collaborator: Integrates reliability and resilience across architecture, operations, and business domains.
Talent Multiplier: Develops and empowers senior managers, fostering engineering mastery and innovation.
Credible Technical Authority: Trusted peer to Infrastructure & Reliability Engineering; capable of leading architecture reviews and executive briefings.
Change Champion: Drives transformation of reliability practices across platforms, pipelines, and teams.
Qualifications & Experience
12+ years in cloud engineering, reliability, or platform leadership roles.
5+ years leading Sr. Managers/Managers in technical domains.
Proven expertise across AWS, with working knowledge of Azure and GCP.
Experience with multi-cloud governance, DR design, IaC at scale, and reliability automation.
Strong understanding of observability, SRE principles, and REO/ITIL-aligned reliability frameworks.
Certifications:
Required: AWS Certified Solutions Architect - Professional
Preferred: AWS DevOps Engineer, Azure Solutions Architect Expert, Google Professional Cloud Architect
Success Metrics
99.9% availability maintained for Tier-1 workloads.
100% coverage of DR automation for Tier-1 services.
25% annual increase in automated quality/test coverage.
15% annual improvement in resource efficiency and cost performance.
Documented resilience participation across all enterprise architecture blueprints.
Positive "technical peer readiness" and succession rating from Head of REO.
Summary Value Proposition
This Director role blends deep AWS reliability engineering expertise, multi-cloud technical breadth, and leadership scale.
It ensures REO maintains both technical depth and leadership redundancy, and it strengthens the bridge between engineering execution and enterprise architecture alignment.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes), you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$145,000.00 - $267,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
S
SAP Engineer - Licensing and Compensation (Hybrid)
🏢 Securian
Salary not disclosed
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Principal Mechanical Integration Engineer - DCI Pipes, Frames and Structures (REMOTE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title : Principal Mechanical Design Engineer
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
* Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
* Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
* Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
* Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
* Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
* Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
* Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
* Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
* Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
* Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
* Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
* Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
* Lead mechanical design reviews and contribute to cross-functional design validation efforts.
* Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
* Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
* Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
* Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
* Conduct root cause analysis and corrective actions for mechanical failures or field issues.
* Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
* Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
* May perform other duties and responsibilities as assigned
How will you get here?
Education :
* Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience :
* 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
* Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
* Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
* Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
* Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
* Excellent interpersonal and communication skills
* Creative, self-motivated, accountable, and team-oriented
* Able to work independently with minimal oversight
* Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
* Skilled in writing reports, business correspondence, and procedural guides
* Effective at presenting information and responding to management, clients, and public queries
* Capable of influencing others and sharing best practices
* Comfortable working as part of a global team
* Capable of assessing projects, articulating risks, and developing project milestones
* Familiar with stage-gate processes in project lifecycle management (PLCM)
* Able to mentor less experienced engineers
* Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
* Master's Degree in Mechanical Engineering
* Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
* Active Professional Engineer (PE) license.
* Knowledge of regulatory and safety standards applicable to data center infrastructure.
* Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Test Engineering Tech II - 401 Shift Days - Flexible Shift Options for Work-Life Balance (FLORENCE)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
JOB SUMMARY
ESSENTIAL DUTIES AND RESPONSIBILITIES · Supports the Test Engineer in the development and commission of test solutions executing the test qualification of the fixture and program as per the specific system qualification process.· Responsibility for providing the deliverables to support the solution in production to both the Test Support Function and Manufacturing Operations.
· Assists in the build and manufacture of testers, fixtures and environmental tooling as required to meet the customer expectations.
· The Technician Engineer provides the interface to the Test Support function providing comprehensive documentation and training for all test solutions implemented.
· Provides the interface to the Manufacturing function providing comprehensive documentation and coordinating training and education for all test operations implemented.
· Through working with the Test Support function monitor and contribute to the improvement of Test Yields, Efficiency, Intermittencies and Uptime providing accurate reporting and clear targets for improvement.
· In conjunction with the Test Engineer strives to consistently upgrade the test process balancing cost, coverage with the goal of providing an optimized and cost efficient test process.
· Works closely with manufacturing and test support to ensure prioritization of support activities. He/ She will be responsible for coordinating the timetable for test readiness based on the weekly production schedule through the appropriate Test Support staff.
· May perform other duties and responsibilities as assigned.
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS · Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
· Ability to define problems, collect data, establish facts, and draw valid conclusions.
· Ability to operate a personal computer including using a Windows based operating system and related software.
· Advanced PC skills, including training and knowledge of Jabil’s software packages.
· Ability to write simple correspondence. Read and understand visual aid.
· Ability to apply common sense understanding to carry out simple one- or two-step instructions.
· Ability to deal with standardized situations with only occasional or no variables.
· Ability to read and comprehend simple instructions, short correspondence, and memos.
· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
· Ability to compute rate, ratio, and percent and to draw and interpret graphs.
Remote working/work at home options are available for this role.
Principal Electrical Controls Engineer - Data Center Infrastructure (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Controls Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Principal Mechanical Integration Engineer – DCI Pipes, Frames and Structures (REMOTE) (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Mechanical Design Engineer
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Senior Electrical CAD Engineer – Remote Data Center Design (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Lead Electrical CAD Designer
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Job Family: General Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
The Lead Electrical CAD Designer will be responsible for creating detailed model designs, modifying existing designs, and working collaboratively with engineers and other team members to meet product specifications. The ideal candidate has in-depth knowledge of various electrical design tools, is detail-oriented, and can effectively communicate design ideas. A strong understanding of Electrical design principles, manufacturing processes, power distribution, automation control (PLC), and electronic device parts are critical. This role will involve selecting key components, developing detailed drawings for control panels, power distribution systems, electrical wiring, and transitioning design to manufacturing.
What will you do?
- Creating 2D and 3D models of electrical systems, particularly for complex projects or when visualization is needed
- Participating in design reviews to ensure accuracy and compliance with requirements
- Advanced proficiency in various CAD software, such as AutoCAD Electrical, Revit, Windchill, Autodesk Inventor-EMX, Autodesk Fusion, to design, draft, and model complex electrical for power system and automation control
- Strong understanding of electrical symbols, power systems and automation control with the concepts to accurately create designs that meet technical specifications and standards
- Work closely with engineers and other designers to meet product specifications and performance requirements
- Modify and revise designs to correct operating deficiencies or to reduce production problems
- Prepare and revise engineering drawings, schematics, BOMs, and layouts as required.
- Check and validate designs to ensure they meet required quality and safety standards
- Excellent attention to detail for ensuring the accuracy of measurements, dimensions, and design specifications
- Strong analytical skills for interpreting complex technical drawings, single line diagram, wiring diagram, schematic, power plan, automation control, ladder diagram, and electrical device specifications
- Designing and creating schematic PLC input/output connections.
- Knowledge of manufacturing processes and materials for creating feasible and cost-effective designs.
- Evaluate/optimize manufacturing assembly processes by designing, modifying, and testing manufacturing methods and equipment, conferring with equipment vendors, and soliciting observations from production team
- Adopt at creating detailed electrical design of components, sub-assemblies, and system integration
- Capable of creating a Bill of Materials (BOM) for release to manufacturing
- Manage relationships with power systems, electronics, control component vendors, and contract manufacturers
- Keep updated with the latest technologies and methods to ensure competitive and cost-effective designs
- Discuss with management and production staff to assess engineering feasibility and cost-effectiveness
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s degree in Electrical Engineering, Industrial Design or relevant field is required
Experience:
- 6-8 years of experience in electrical design within the power distribution or data center industry.
- Proven experience as a CAD designer, preferably in an electrical engineering environment.
- Proficiency in CAD software (AutoCAD Electrical, Revit).
- Strong understanding of electrical systems, integration strategy, and system coordination
- Excellent problem-solving skills and attention to detail
- Effective communication skills to liaise with engineers, manufacturers, and clients, explaining designs and modifications clearly and efficiently
Knowledge, Skills, Abilities:
- Strong knowledge of electrical design, manufacturing processes, and material properties.
- Power Systems, PLC, VFD, motor control, electronic automation control device, sensors, AC/DC, single phase and three phase power systems.
- Electrical Standards, Codes, and regulations: IEEE, UL, ANSI/NEMA, NFPA 70E, NEC, IEC, CSA.
- Excellent interpersonal and communication skills.
- Creative, self-motivated, accountable, and team-oriented.
- Able to work independently with minimal oversight.
- Effective at presenting information and responding to management, clients, and public queries.
- Capable of influencing others and sharing best practices.
- Comfortable working as part of a global team.
- Capable of assessing projects, articulating risks, and developing project milestones.
- Familiar with stage-gate processes in project lifecycle management (PLCM).
Remote working/work at home options are available for this role.
Principal Electrical Controls Engineer - Data Center Infrastructure - Remote work opportunity with international travel exposure (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Design Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Principal Electrical Controls Engineer - Data Center Infrastructure (REMOTE) - Flexible Work Environment with Travel Opportunities (WASHINGTON)
🏢 JABIL CIRCUIT, INC
Salary not disclosed
Job Title: Principal Electrical Controls Engineer
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
jobs by
